McMaster-Carr logo
    Filter by
    Anvil Tip Shape
    Spindle Tip Shape
    System of Measurement
    Display Type
    Manufacturer
    Point Angle
    Industrial Info Snippet
    Micrometer Type
    Thimble Type
    Measuring Increments
    SPC Data Output
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Anvil Face Diameter
    Spindle Face Material
    Frame Material
    Digital Display Type
    Container Type
    Batteries Included
    Anvil Face Material
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    23 Products

    Micrometer Type

    For Use On

    Digital Outside Micrometers for Small Holes, Grooves, and Keyways

    Image of Product. Front orientation. Outside Micrometers. Digital Outside Micrometers for Small Holes, Grooves, and Keyways.
    Find the outer dimensions of grooves in pins and other small parts, then quickly view your readings. The anvil and spindle are as thin as a pencil point to slip into narrow spaces where standard ones won't fit.
    With an LCD display, these micrometers give instant measurements—no need to read scales. Swap between inch and metric or set the position to zero, all with the press of a button. You don't need to reset the zero point since they retain their position when turned off, also known as absolute (ABS) positioning.
    Mitutoyo—The go-to for machinists and engineers. Every part is made within a Mitutoyo automated factory and tested in-house in Japan. The spindle glides as you turn the thimble with a weighty, silky-smooth feel.
    With SPC Data Output—Send measurements to a computer or data processor to store, analyze, and manage data. You'll need a data cable or SPC wireless transmitter and receiver.
    Calibration Certificate—Choose these micrometers when precision measurements are required for quality control or by regulation. The certificate is traceable to NIST, so you can be confident your measurements are correct and consistent.
    Ratchet-Stop Thimble—Best for consistent, repeatable measurements. The spindle stops extending the moment it reaches your part, so it won’t overtighten. Hear and feel a satisfying click that confirms you’ve applied the right amount of pressure.
    Measuring
    Range
    Accuracy
    Measuring
    Increments
    Outside
    Micrometers
    Outside Micrometers with
    Calibration Certificate
    Inch
    Metric,
    mm
    Inch
    Metric
    Inch
    Metric,
    mm
    Thimble
    Type
    Spindle Point
    Angle
    Throat
    Dp.
    Frame
    Material
    Measuring Functions
    Mfr. Model
    No.
    Each
    Each
    Mitutoyo
     
    Without SPC Data Output
    0" to 1"0 to 25.4±0.0001"±0.0025 mm0.00005"0.001Ratchet Stop15°1.26"Cast IronZero-Position Memory (ABS)342-351-30———0000000000000000
    0" to 1"0 to 25.4±0.0001"±0.0025 mm0.00005"0.001Ratchet Stop15°1.26"Cast IronZero-Position Memory (ABS)342-351-32000000000000000———0
    0" to 1"0 to 25.4±0.0001"±0.0025 mm0.00005"0.001Ratchet Stop30°1.26"Cast IronZero-Position Memory (ABS)342-361-300000000000000000000000000000
     
    With SPC Data Output
    0" to 1"0 to 25.4±0.00015"±0.00381 mm0.00005"0.001Ratchet Stop—1 1/4"Cast IronZero-Position Memory (ABS)422-330-30———00000000000000
     
    Accessories and Replacements for Outside Micrometers
    SPC Data Cables
    Image of Product. Front orientation. Contains Inset. Cords for Measuring Tool Data Processors. Mitutoyo Data Out Switch B × 10-Pin Mitutoyo Connector.
    Image of Product. Front orientation. Contains Inset. Cords for Measuring Tool Data Processors. Mitutoyo Data Out Switch B × USB-A.

    Mitutoyo Data Out Switch B ×

    10-Pin Mitutoyo Connector

    Mitutoyo Data Out Switch B × USB-A

    USB-A Connection—Plug micrometers with SPC data output directly into your computer.
    10-Pin Mitutoyo Connector—Connect micrometers with SPC data output to a Mitutoyo miniprocessor or multiplexer.
    Connection
    Lg.
    Each
    Mitutoyo
    Mitutoyo Data Out Switch B × 10-Pin Mitutoyo Connector40"000000000000000
    Mitutoyo Data Out Switch B × 10-Pin Mitutoyo Connector80"00000000000000
    Mitutoyo Data Out Switch B × USB-A80"000000000000
     
    SPC Wireless Transmitters
    Image of Product. Front orientation. Contains Inset. SPC Wireless Transmitters. Mitutoyo Data Out Switch B Connection.

    Mitutoyo Data Out Switch B

    Connection

    Wirelessly send measurements from micrometers with SPC data output to your computer. You'll also need a receiver.
    Electrical Connection
    Mfr.
    Series
    Each
    Mitutoyo Data Out Switch BU-WAVE-T0000000000000
    SPC Wireless Receivers
    Image of Product. Front orientation. SPC Wireless Receivers.
    Wirelessly send measurements from micrometers with SPC data output to your computer. You'll also need a transmitter.
    Electrical
    Connection
    For Mfr.
    Series
    Each
    Mitutoyo
    USB-AU-WAVE-T0000000000000
     
    Replacement Cases
    Image of Product. Front orientation. Micrometer Cases. Mitutoyo.

    Mitutoyo

    For Mfr. Model No.
    Each
    Mitutoyo
    293-331-30, 293-341-30, 293-345-30, 342-351-30, 342-361-300000000000000
     
    Replacement Batteries
    Each
    1-9
    10-49
    50-Up
    Replacement SR44 Silver Oxide Battery00000000000000000000000

    Outside Micrometers for Small Holes, Grooves, and Keyways

    Image of Product. Front orientation. Outside Micrometers. Outside Micrometers for Small Holes, Grooves, and Keyways.
    Image of Product. Front orientation. Outside Micrometers. Outside Micrometers for Small Holes, Grooves, and Keyways, With Analog Display.

    With Analog Display

    Thin as a pencil point, the anvil and spindle slip into narrow spaces where standard ones won't fit. They're often used to measure the outer dimensions of grooves in pins, O-rings, and other small parts.
    To find your exact measurements, read the scales on the sleeve and thimble. You don't have to replace any batteries, so these micrometers are always ready for the job.
    Mitutoyo—The go-to for machinists and engineers. Every part is made within a Mitutoyo automated factory and tested in-house in Japan. The spindle glides as you turn the thimble with a weighty, silky-smooth feel.
    With Analog Display—Watch the display update as the spindle moves for easy-to-read, trustworthy measurements.
    Calibration Certificate—Choose these micrometers when precision measurements are required for quality control or by regulation. The certificate is traceable to NIST, so you can be confident your measurements are correct and consistent.
    Ratchet-Stop Thimble—Best for consistent, repeatable measurements. The spindle stops extending the moment it reaches your part, so it won’t overtighten. Hear and feel a satisfying click that confirms you’ve applied the right amount of pressure.
    Outside
    Micrometers
    Outside Micrometers with
    Calibration Certificate
    Measuring
    Range
    Accuracy
    Measuring
    Increments
    Thimble
    Type
    Spindle Point
    Angle
    Throat
    Dp.
    Frame
    Material
    Measurement
    Scale Type
    Mfr. Model
    No.
    Each
    Each
    Mitutoyo
     
    Outside Micrometers
    0" to 1"±0.00015"0.001"Ratchet Stop30°1.496"Cast IronVernier112-2250000000000000000000000000000
     
    With Analog Display
    0" to 1"±0.00015"0.001"Ratchet Stop15°1.496"Cast IronVernier142-17700000000000000000000000000
    0" to 1"±0.00015"0.001"Ratchet Stop30°1.496"Cast IronVernier142-22500000000000000000000000000
     

    Digital Outside Micrometers for Wire Crimps

    Image of ProductInUse. Front orientation. Contains Annotated. Outside Micrometers. Digital Outside Micrometers for Wire Crimps.
    Image of Product. Front orientation. Outside Micrometers. Digital Outside Micrometers for Wire Crimps.
    Measure crimp height to make sure there are no gaps between wires. The pointed spindle helps you measure without crushing and breaking the delicate wire.
    With an LCD display, these micrometers give instant measurements—no need to read scales. Swap between inch and metric or set the position to zero, all with the press of a button. You don't need to reset the zero point since they retain their position when turned off, also known as absolute (ABS) positioning.
    Mitutoyo—The go-to for machinists and engineers. Every part is made within a Mitutoyo automated factory and tested in-house in Japan. The spindle glides as you turn the thimble with a weighty, silky-smooth feel.
    With SPC Data Output—Send measurements to a computer or data processor to store, analyze, and manage data. You'll need a data cable or SPC wireless transmitter and receiver.
    Ratchet-Stop Thimble—Best for consistent, repeatable measurements. The spindle stops extending the moment it reaches your part, so it won’t overtighten. Hear and feel a satisfying click that confirms you’ve applied the right amount of pressure.
    Measuring
    Range
    Accuracy
    Measuring
    Increments
    Outside
    Micrometers
    Inch
    Metric,
    mm
    Inch
    Metric
    Inch
    Metric,
    mm
    Thimble
    Type
    Spindle Point
    Angle
    Throat
    Dp.
    Frame
    Material
    Measuring Functions
    Mfr. Model
    No.
    Each
    Mitutoyo
     
    With SPC Data Output
    0" to 0.8"0 to 20±0.00015"±0.004 mm0.00005"0.001Ratchet Stop60°1/4"Cast IronZero-Position Memory (ABS)342-371-3000000000000000
     
    Accessories and Replacements for Outside Micrometers
    SPC Data Cables
    Image of Product. Front orientation. Contains Inset. Cords for Measuring Tool Data Processors. Mitutoyo Data Out Switch B × 10-Pin Mitutoyo Connector.
    Image of Product. Front orientation. Contains Inset. Cords for Measuring Tool Data Processors. Mitutoyo Data Out Switch B × USB-A.

    Mitutoyo Data Out Switch B ×

    10-Pin Mitutoyo Connector

    Mitutoyo Data Out Switch B × USB-A

    USB-A Connection—Plug micrometers with SPC data output directly into your computer.
    10-Pin Mitutoyo Connector—Connect micrometers with SPC data output to a Mitutoyo miniprocessor or multiplexer.
    Connection
    Lg.
    Each
    Mitutoyo
    Mitutoyo Data Out Switch B × 10-Pin Mitutoyo Connector40"000000000000000
    Mitutoyo Data Out Switch B × 10-Pin Mitutoyo Connector80"00000000000000
    Mitutoyo Data Out Switch B × USB-A80"000000000000
     
    SPC Wireless Transmitters
    Image of Product. Front orientation. Contains Inset. SPC Wireless Transmitters. Mitutoyo Data Out Switch B Connection.

    Mitutoyo Data Out Switch B

    Connection

    Wirelessly send measurements from micrometers with SPC data output to your computer. You'll also need a receiver.
    Electrical Connection
    Mfr.
    Series
    Each
    Mitutoyo Data Out Switch BU-WAVE-T0000000000000
    SPC Wireless Receivers
    Image of Product. Front orientation. SPC Wireless Receivers.
    Wirelessly send measurements from micrometers with SPC data output to your computer. You'll also need a transmitter.
    Electrical
    Connection
    For Mfr.
    Series
    Each
    Mitutoyo
    USB-AU-WAVE-T0000000000000
     
    Replacement Batteries
    Each
    1-9
    10-49
    50-Up
    Replacement SR44 Silver Oxide Battery00000000000000000000000

    Digital Outside Micrometers for End Mills, Taps, and Reamers

    Image of Product. Front orientation. Outside Micrometers. Digital Outside Micrometers for End Mills, Taps, and Reamers.
    Find the outer diameter of end mills and other cutting tools with three flutes. The V-shaped anvil cradles two of the flutes while the spindle contacts the third.
    With an LCD display, these micrometers give instant measurements—no need to read scales. Swap between inch and metric or set the position to zero, all with the press of a button. You don't need to reset the zero point since they retain their position when turned off, also known as absolute (ABS) positioning.
    Mitutoyo—The go-to for machinists and engineers. Every part is made within a Mitutoyo automated factory and tested in-house in Japan. The spindle glides as you turn the thimble with a weighty, silky-smooth feel.
    With SPC Data Output—Send measurements to a computer or data processor to store, analyze, and manage data. You'll need a data cable or SPC wireless transmitter and receiver.
    Calibration Certificate—Choose these micrometers when precision measurements are required for quality control or by regulation. The certificate is traceable to NIST, so you can be confident your measurements are correct and consistent.
    Ratchet-Stop Thimble—Best for consistent, repeatable measurements. The spindle stops extending the moment it reaches your part, so it won’t overtighten. Hear and feel a satisfying click that confirms you’ve applied the right amount of pressure.
    Measuring
    Range
    Accuracy
    Measuring
    Increments
    Outside Micrometers with
    Calibration Certificate
    Inch
    Metric, mm
    Inch
    Metric
    Inch
    Metric,
    mm
    Thimble
    Type
    Throat
    Dp.
    Frame
    Material
    Measuring Functions
    Mfr. Model
    No.
    Each
    Mitutoyo
     
    With SPC Data Output
    0.05" to 0.6"1.27 to 15.24±0.0002"±0.00508 mm0.00005"0.001Ratchet Stop0.98"Cast IronZero-Position Memory (ABS)314-351-3000000000000000
     
    Accessories and Replacements for Outside Micrometers
    SPC Data Cables
    Image of Product. Front orientation. Contains Inset. Cords for Measuring Tool Data Processors. Mitutoyo Data Out Switch B × 10-Pin Mitutoyo Connector.
    Image of Product. Front orientation. Contains Inset. Cords for Measuring Tool Data Processors. Mitutoyo Data Out Switch B × USB-A.

    Mitutoyo Data Out Switch B ×

    10-Pin Mitutoyo Connector

    Mitutoyo Data Out Switch B × USB-A

    USB-A Connection—Plug micrometers with SPC data output directly into your computer.
    10-Pin Mitutoyo Connector—Connect micrometers with SPC data output to a Mitutoyo miniprocessor or multiplexer.
    Connection
    Lg.
    Each
    Mitutoyo
    Mitutoyo Data Out Switch B × 10-Pin Mitutoyo Connector40"000000000000000
    Mitutoyo Data Out Switch B × 10-Pin Mitutoyo Connector80"00000000000000
    Mitutoyo Data Out Switch B × USB-A80"000000000000
     
    SPC Wireless Transmitters
    Image of Product. Front orientation. Contains Inset. SPC Wireless Transmitters. Mitutoyo Data Out Switch B Connection.

    Mitutoyo Data Out Switch B

    Connection

    Wirelessly send measurements from micrometers with SPC data output to your computer. You'll also need a receiver.
    Electrical Connection
    Mfr.
    Series
    Each
    Mitutoyo Data Out Switch BU-WAVE-T0000000000000
    SPC Wireless Receivers
    Image of Product. Front orientation. SPC Wireless Receivers.
    Wirelessly send measurements from micrometers with SPC data output to your computer. You'll also need a transmitter.
    Electrical
    Connection
    For Mfr.
    Series
    Each
    Mitutoyo
    USB-AU-WAVE-T0000000000000
     
    Replacement Batteries
    Each
    1-9
    10-49
    50-Up
    Replacement SR44 Silver Oxide Battery00000000000000000000000

    Outside Micrometers for Screw Threads

    Image of Product. Front orientation. Outside Micrometers. Outside Micrometers for Screw Threads.
    Make sure screws fit precisely in threaded holes. The anvil and spindle each have a 60° point to fit between standard thread grooves.
    To find your exact measurements, read the scales on the sleeve and thimble. These micrometers are free of electronic components that could break if dropped or short-circuit if wet. You don't have to replace any batteries, so they're always ready for the job.
    Starrett—Precision machined and tested in the U.S. These Starrett micrometers come packaged in their iconic red case, so you'll be able to spot them on the busiest of bench tops.
    Calibration Certificate—Choose these micrometers when precision measurements are required for quality control or by regulation. The certificate is traceable to NIST, so you can be confident your measurements are correct and consistent.
    Outside
    Micrometers
    Outside Micrometers with
    Calibration Certificate
    Measuring
    Range
    Accuracy
    Measuring
    Increments
    Thimble
    Type
    Spindle Point
    Angle
    Throat
    Dp.
    Frame
    Material
    Mfr. Model
    No.
    Each
    Each
    Starrett
    0" to 7/8"±0.0001"0.001"Plain60°1 1/8"Steel210AP0000000000000000000000000000
     
    Replacement Cases
    Image of Product. Front orientation. Micrometer Cases. Starrett.

    Starrett

    For Mfr. Model No.
    Each
    Starrett
    210AP, 436.1XRL-1, T230XFL, T230XRL, T436.1XFL-1, T436.1XRL-100000000000000
     
    back to top