System of Measurement System of Measurement |
|---|
|
|
Size Size |
|---|
Decimal Size Equivalent Decimal Size Equivalent |
|---|
|
For Use On For Use On |
|---|
|
|
Shank Type Shank Type |
|---|
 |  |
| Round | Quick-Change Hex |
Material Material |
|---|
|
Overall Length Overall Length |
|---|
|
Shank Size Shank Size |
|---|
|
Maximum Drilling Depth Maximum Drilling Depth |
|---|
|
Individual/Set Individual/Set |
|---|
|
Finish Finish |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Length Class Length Class |
|---|
 | Jobbers' Length |
 | Short Length |
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Drill Bit Decimal Size Equivalents
More
About Drill Bits
More
Drill Bits for Precise Holes in Wood
Black-Oxide Steel
Uncoated High-Speed Steel
Three sharp points allow these bits to drill accurate straight and overlapping holes, even across the grain. The center guide point prevents the bit from wandering. Also known as brad-point bits.
High-speed steel drill bits are stronger and more wear resistant than steel drill bits.
For technical drawings and 3-D models, click on a part number.
Shank | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Type | Size | Point Style | Each | |
Inch | ||||||||
Black-Oxide Steel | ||||||||
| 1/8" | 0.125" | 2 5/8" | 1.44" | Round | 1/8" | Brad | 0000000 | 00000 |
| 3/16" | 0.1875" | 3 3/8" | 2.06" | Round | 3/16" | Brad | 0000000 | 0000 |
| 1/4" | 0.25" | 4" | 2 1/2" | Round | 1/4" | Brad | 0000000 | 0000 |
| 5/16" | 0.3125" | 4 5/8" | 2.94" | Round | 5/16" | Brad | 0000000 | 0000 |
| 3/8" | 0.375" | 5 1/4" | 3.44" | Round | 3/8" | Brad | 0000000 | 0000 |
| 7/16" | 0.4375" | 5 5/8" | 3.69" | Round | 3/8" | Brad | 0000000 | 00000 |
| 1/2" | 0.5" | 6" | 3.97" | Round | 3/8" | Brad | 0000000 | 00000 |
Uncoated High-Speed Steel | ||||||||
| 1/8" | 0.125" | 2 3/4" | 1.63" | Round | 1/8" | Brad | 00000000 | 0000 |
| 5/32" | 0.1563" | 3 1/8" | 2" | Round | 3/16" | Brad | 00000000 | 0000 |
| 7/32" | 0.2188" | 3 3/4" | 2 1/2" | Round | 1/4" | Brad | 00000000 | 0000 |
| 1/4" | 0.25" | 4" | 2 3/4" | Round | 1/4" | Brad | 00000000 | 0000 |
| 17/64" | 0.2656" | 4 1/8" | 2.88" | Round | 1/4" | Brad | 00000000 | 0000 |
| 9/32" | 0.2813" | 4 1/4" | 2.94" | Round | 5/16" | Brad | 00000000 | 00000 |
| 5/16" | 0.3125" | 4 1/2" | 3.19" | Round | 5/16" | Brad | 00000000 | 00000 |
| 11/32" | 0.3438" | 4 3/4" | 3.44" | Round | 3/8" | Brad | 00000000 | 00000 |
| 3/8" | 0.375" | 5" | 3.63" | Round | 3/8" | Brad | 00000000 | 00000 |
| 25/64" | 0.3906" | 5 1/8" | 3 3/4" | Round | 3/8" | Brad | 00000000 | 00000 |
| 13/32" | 0.4063" | 5 1/4" | 3.88" | Round | 7/16" | Brad | 00000000 | 00000 |
| 7/16" | 0.4375" | 5 1/2" | 4.06" | Round | 7/16" | Brad | 00000000 | 00000 |
| 29/64" | 0.4531" | 5 5/8" | 4.19" | Round | 7/16" | Brad | 00000000 | 00000 |
| 15/32" | 0.4688" | 5 3/4" | 4.31" | Round | 1/2" | Brad | 00000000 | 00000 |
| 1/2" | 0.5" | 6" | 4 1/2" | Round | 1/2" | Brad | 0000000 | 00000 |
| 17/32" | 0.5313" | 6" | 3" | Round | 1/2" | Brad | 0000000 | 00000 |
| 9/16" | 0.5625" | 6" | 3" | Round | 1/2" | Brad | 0000000 | 00000 |
| 19/32" | 0.5938" | 6" | 3" | Round | 1/2" | Brad | 0000000 | 00000 |
| 5/8" | 0.625" | 6" | 3" | Round | 1/2" | Brad | 0000000 | 00000 |
| 21/32" | 0.6563" | 6" | 3" | Round | 1/2" | Brad | 0000000 | 00000 |
| 11/16" | 0.6875" | 6" | 3" | Round | 1/2" | Brad | 0000000 | 00000 |
| 3/4" | 0.75" | 6" | 3" | Round | 1/2" | Brad | 0000000 | 00000 |
| 25/32" | 0.7813" | 6" | 3" | Round | 1/2" | Brad | 0000000 | 00000 |
| 13/16" | 0.8125" | 6" | 3" | Round | 1/2" | Brad | 0000000 | 00000 |
| 7/8" | 0.875" | 6" | 3" | Round | 1/2" | Brad | 0000000 | 00000 |
| 15/16" | 0.9375" | 6" | 3" | Round | 1/2" | Brad | 0000000 | 00000 |
| 1" | 1" | 6" | 3" | Round | 1/2" | Brad | 0000000 | 00000 |
| 1 1/16" | 1.0625" | 6" | 3" | Round | 1/2" | Brad | 0000000 | 00000 |
Metric | ||||||||
Uncoated High-Speed Steel | ||||||||
| 3.0 mm | 0.1181" | 70mm | 45mm | Round | 3mm | Brad | 00000000 | 00000 |
| 5.0 mm | 0.1969" | 90mm | 60mm | Round | 5mm | Brad | 00000000 | 00000 |
| 6.0 mm | 0.2362" | 100mm | 75mm | Round | 6mm | Brad | 00000000 | 00000 |
| 7.0 mm | 0.2756" | 110mm | 85mm | Round | 7mm | Brad | 00000000 | 00000 |
| 8.0 mm | 0.315" | 115mm | 89mm | Round | 8mm | Brad | 00000000 | 00000 |
| 9.0 mm | 0.3543" | 125mm | 100mm | Round | 9mm | Brad | 00000000 | 00000 |
| 10.0 mm | 0.3937" | 130mm | 105mm | Round | 10mm | Brad | 00000000 | 00000 |
| 14.0 mm | 0.5512" | 140mm | 110mm | Round | 10mm | Brad | 00000000 | 00000 |
| 15.0 mm | 0.5906" | 140mm | 110mm | Round | 10mm | Brad | 00000000 | 00000 |
Drill Bits for Carbon Fiber, Fiberglass, and Graphite
Uncoated Brad Point
These jobbers'-length bits have the rigidity and length required for most applications. They are designed to make clean holes in abrasive material. Their point keeps the bit centered without a pilot hole.
Uncoated drill bits have three drill points that make clean holes in fiber-reinforced composites without fraying or delaminating the material.
For technical drawings and 3-D models, click on a part number.
Shank | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Type | Size | Point Style | Each | |
Inch | ||||||||
Uncoated Carbide | ||||||||
| 3/64" | 0.0469" | 1 1/2" | 0.6" | Round | 3/64" | Brad | 000000 | 000000 |
| 1/16" | 0.0625" | 1 1/2" | 0.6" | Round | 1/16" | Brad | 000000 | 00000 |
| 5/64" | 0.0781" | 1 3/4" | 0.7" | Round | 5/64" | Brad | 0000000 | 00000 |
| 3/32" | 0.0938" | 2" | 0.8" | Round | 3/32" | Brad | 0000000 | 00000 |
| 7/64" | 0.1094" | 2 1/4" | 1" | Round | 7/64" | Brad | 0000000 | 00000 |
| 1/8" | 0.125" | 2 1/4" | 1" | Round | 1/8" | Brad | 0000000 | 00000 |
| 9/64" | 0.1406" | 2 1/2" | 1.1" | Round | 9/64" | Brad | 0000000 | 00000 |
| 5/32" | 0.1563" | 2 1/2" | 1.1" | Round | 5/32" | Brad | 0000000 | 00000 |
| 11/64" | 0.1719" | 2 3/4" | 1.3" | Round | 11/64" | Brad | 0000000 | 00000 |
| 3/16" | 0.1875" | 2 3/4" | 1.3" | Round | 3/16" | Brad | 0000000 | 00000 |
| 13/64" | 0.2031" | 3" | 1.4" | Round | 13/64" | Brad | 0000000 | 00000 |
| 7/32" | 0.2188" | 3" | 1.4" | Round | 7/32" | Brad | 0000000 | 00000 |
| 15/64" | 0.2344" | 3 1/4" | 1.6" | Round | 15/64" | Brad | 0000000 | 00000 |
| 1/4" | 0.25" | 3 1/4" | 1.6" | Round | 1/4" | Brad | 0000000 | 00000 |
| 17/64" | 0.2656" | 3 1/2" | 1.7" | Round | 17/64" | Brad | 0000000 | 00000 |
| 9/32" | 0.2813" | 3 1/2" | 1.7" | Round | 9/32" | Brad | 0000000 | 00000 |
| 19/64" | 0.2969" | 3 3/4" | 1.9" | Round | 19/64" | Brad | 0000000 | 00000 |
| 5/16" | 0.3125" | 3 3/4" | 1.9" | Round | 5/16" | Brad | 0000000 | 00000 |
| 21/64" | 0.3281" | 4" | 2" | Round | 21/64" | Brad | 0000000 | 00000 |
| 11/32" | 0.3438" | 4" | 2" | Round | 11/32" | Brad | 0000000 | 00000 |
| 23/64" | 0.3594" | 4 1/4" | 2.2" | Round | 23/64" | Brad | 0000000 | 00000 |
| 3/8" | 0.375" | 4 1/4" | 2.2" | Round | 3/8" | Brad | 0000000 | 00000 |
| 25/64" | 0.3906" | 4 1/2" | 2.3" | Round | 25/64" | Brad | 0000000 | 000000 |
| 13/32" | 0.4063" | 4 1/2" | 2.3" | Round | 13/32" | Brad | 0000000 | 000000 |
| 27/64" | 0.4219" | 4 1/2" | 2.3" | Round | 27/64" | Brad | 0000000 | 000000 |
| 7/16" | 0.4375" | 4 1/2" | 2.3" | Round | 7/16" | Brad | 0000000 | 000000 |
| 29/64" | 0.4531" | 4 3/4" | 2.4" | Round | 29/64" | Brad | 0000000 | 000000 |
| 15/32" | 0.4688" | 4 3/4" | 2.4" | Round | 15/32" | Brad | 0000000 | 000000 |
| 31/64" | 0.4844" | 4 3/4" | 2.4" | Round | 31/64" | Brad | 0000000 | 000000 |
| 1/2" | 0.5" | 4 3/4" | 2.4" | Round | 1/2" | Brad | 0000000 | 000000 |
| 9/16" | 0.5625" | 6" | 3.2" | Round | 9/16" | Brad | 0000000 | 000000 |
| 5/8" | 0.625" | 6" | 3.2" | Round | 5/8" | Brad | 0000000 | 000000 |
Wire Gauge | ||||||||
Uncoated Carbide | ||||||||
| 60 ga | 0.04" | 1 1/2" | 0.6" | Round | 0.04" | Brad | 00000000 | 00000 |
| 59 ga | 0.041" | 1 1/2" | 0.6" | Round | 0.041" | Brad | 00000000 | 00000 |
| 58 ga | 0.042" | 1 1/2" | 0.6" | Round | 0.42" | Brad | 00000000 | 00000 |
| 57 ga | 0.043" | 1 1/2" | 0.6" | Round | 0.043" | Brad | 00000000 | 00000 |
| 56 ga | 0.0465" | 1 1/2" | 0.6" | Round | 0.0465" | Brad | 00000000 | 00000 |
| 55 ga | 0.052" | 1 1/2" | 0.6" | Round | 0.052" | Brad | 00000000 | 00000 |
| 54 ga | 0.055" | 1 1/2" | 0.6" | Round | 0.055" | Brad | 00000000 | 00000 |
| 53 ga | 0.0595" | 1 1/2" | 0.6" | Round | 0.0595" | Brad | 00000000 | 00000 |
| 52 ga | 0.0635" | 1 1/2" | 0.6" | Round | 0.0635" | Brad | 00000000 | 00000 |
| 51 ga | 0.067" | 1 1/2" | 0.6" | Round | 0.067" | Brad | 00000000 | 00000 |
| 50 ga | 0.07" | 1 3/4" | 0.7" | Round | 0.07" | Brad | 00000000 | 00000 |
| 49 ga | 0.073" | 1 3/4" | 0.7" | Round | 0.073" | Brad | 0000000 | 00000 |
| 48 ga | 0.076" | 1 3/4" | 0.7" | Round | 0.076" | Brad | 00000000 | 00000 |
| 47 ga | 0.0785" | 1 3/4" | 0.7" | Round | 0.0785" | Brad | 00000000 | 00000 |
| 46 ga | 0.081" | 1 3/4" | 0.7" | Round | 0.081" | Brad | 00000000 | 00000 |
| 45 ga | 0.082" | 1 3/4" | 0.7" | Round | 0.082" | Brad | 00000000 | 00000 |
| 44 ga | 0.086" | 2" | 0.8" | Round | 0.086" | Brad | 00000000 | 00000 |
| 43 ga | 0.089" | 2" | 0.8" | Round | 0.089" | Brad | 00000000 | 00000 |
| 42 ga | 0.0935" | 2" | 0.8" | Round | 0.0935" | Brad | 00000000 | 00000 |
| 41 ga | 0.096" | 2" | 0.8" | Round | 0.096" | Brad | 00000000 | 00000 |
| 40 ga | 0.098" | 2" | 0.8" | Round | 0.098" | Brad | 00000000 | 00000 |
| 39 ga | 0.0995" | 2 1/4" | 1" | Round | 0.0995" | Brad | 0000000 | 00000 |
| 38 ga | 0.1015" | 2 1/4" | 1" | Round | 0.1015" | Brad | 00000000 | 00000 |
| 37 ga | 0.104" | 2 1/4" | 1" | Round | 0.104" | Brad | 00000000 | 00000 |
| 36 ga | 0.1065" | 2 1/4" | 1" | Round | 0.1065" | Brad | 00000000 | 00000 |
| 35 ga | 0.11" | 2 1/4" | 1" | Round | 0.11" | Brad | 00000000 | 00000 |
| 34 ga | 0.111" | 2 1/4" | 1" | Round | 0.111" | Brad | 00000000 | 00000 |
| 33 ga | 0.113" | 2 1/4" | 1" | Round | 0.113" | Brad | 00000000 | 00000 |
| 32 ga | 0.116" | 2 1/4" | 1" | Round | 0.116" | Brad | 00000000 | 00000 |
| 31 ga | 0.12" | 2 1/4" | 1" | Round | 0.12" | Brad | 00000000 | 00000 |
| 30 ga | 0.1285" | 2 1/4" | 1.1" | Round | 0.1285" | Brad | 00000000 | 00000 |
| 29 ga | 0.136" | 2 1/2" | 1.1" | Round | 0.136" | Brad | 0000000 | 00000 |
| 28 ga | 0.1405" | 2 1/2" | 1.1" | Round | 0.1405" | Brad | 00000000 | 00000 |
| 27 ga | 0.144" | 2 1/2" | 1.1" | Round | 0.144" | Brad | 00000000 | 00000 |
| 26 ga | 0.147" | 2 1/2" | 1.1" | Round | 0.147" | Brad | 00000000 | 00000 |
| 25 ga | 0.1495" | 2 1/2" | 1.1" | Round | 0.1495" | Brad | 00000000 | 00000 |
| 24 ga | 0.152" | 2 1/2" | 1.1" | Round | 0.152" | Brad | 00000000 | 00000 |
| 23 ga | 0.154" | 2 1/2" | 1.1" | Round | 0.154" | Brad | 00000000 | 00000 |
| 22 ga | 0.157" | 2 1/2" | 1.1" | Round | 0.157" | Brad | 00000000 | 00000 |
| 21 ga | 0.159" | 2 1/2" | 1.1" | Round | 0.159" | Brad | 00000000 | 00000 |
| 20 ga | 0.161" | 2 1/2" | 1.1" | Round | 0.161" | Brad | 00000000 | 00000 |
| 19 ga | 0.166" | 2 3/4" | 1.3" | Round | 0.166" | Brad | 0000000 | 00000 |
| 18 ga | 0.1695" | 2 3/4" | 1.3" | Round | 0.1695" | Brad | 00000000 | 00000 |
| 17 ga | 0.173" | 2 3/4" | 1.3" | Round | 0.173" | Brad | 00000000 | 00000 |
| 16 ga | 0.177" | 2 3/4" | 1.3" | Round | 0.177" | Brad | 00000000 | 00000 |
| 15 ga | 0.18" | 2 3/4" | 1.3" | Round | 0.18" | Brad | 00000000 | 00000 |
| 14 ga | 0.182" | 2 3/4" | 1.3" | Round | 0.182" | Brad | 00000000 | 00000 |
| 13 ga | 0.185" | 2 3/4" | 1.3" | Round | 0.185" | Brad | 00000000 | 00000 |
| 12 ga | 0.189" | 2 3/4" | 1.3" | Round | 0.189" | Brad | 00000000 | 00000 |
| 11 ga | 0.191" | 2 3/4" | 1.3" | Round | 0.191" | Brad | 00000000 | 00000 |
| 10 ga | 0.1935" | 2 3/4" | 1.3" | Round | 0.1935" | Brad | 00000000 | 00000 |
| 9 ga | 0.196" | 3" | 1.4" | Round | 0.196" | Brad | 0000000 | 00000 |
| 8 ga | 0.199" | 3" | 1.4" | Round | 0.199" | Brad | 00000000 | 00000 |
| 7 ga | 0.201" | 3" | 1.4" | Round | 0.201" | Brad | 00000000 | 00000 |
| 6 ga | 0.204" | 3" | 1.4" | Round | 0.204" | Brad | 00000000 | 00000 |
| 5 ga | 0.2055" | 3" | 1.4" | Round | 0.2055" | Brad | 00000000 | 00000 |
| 4 ga | 0.209" | 3" | 1.4" | Round | 0.209" | Brad | 00000000 | 00000 |
| 3 ga | 0.213" | 3" | 1.4" | Round | 0.213" | Brad | 00000000 | 00000 |
| 2 ga | 0.221" | 3" | 1.4" | Round | 0.221" | Brad | 00000000 | 00000 |
| 1 ga | 0.228" | 3 1/4" | 1.4" | Round | 0.228" | Brad | 00000000 | 00000 |
Letter | ||||||||
Uncoated Carbide | ||||||||
| A | 0.234" | 3 1/4" | 1.6" | Round | 0.234" | Brad | 00000000 | 00000 |
| B | 0.238" | 3 1/4" | 1.6" | Round | 0.238" | Brad | 00000000 | 00000 |
| C | 0.242" | 3 1/4" | 1.6" | Round | 0.242" | Brad | 00000000 | 00000 |
| D | 0.246" | 3 1/4" | 1.6" | Round | 0.246" | Brad | 00000000 | 00000 |
| E | 0.25" | 3 1/4" | 1.6" | Round | 1/4" | Brad | 00000000 | 00000 |
| F | 0.257" | 3 1/2" | 1.6" | Round | 0.257" | Brad | 00000000 | 00000 |
| G | 0.261" | 3 1/2" | 1.7" | Round | 0.261" | Brad | 00000000 | 00000 |
| H | 0.266" | 3 1/2" | 1.7" | Round | 0.266" | Brad | 00000000 | 00000 |
| I | 0.272" | 3 1/2" | 1.7" | Round | 0.272" | Brad | 00000000 | 00000 |
| J | 0.277" | 3 1/2" | 1.7" | Round | 0.277" | Brad | 00000000 | 00000 |
| K | 0.281" | 3 1/2" | 1.7" | Round | 0.281" | Brad | 00000000 | 00000 |
| L | 0.29" | 3 1/2" | 1.7" | Round | 0.29" | Brad | 00000000 | 00000 |
| M | 0.295" | 3 3/4" | 1.9" | Round | 0.295" | Brad | 00000000 | 00000 |
| N | 0.302" | 3 3/4" | 1.9" | Round | 0.302" | Brad | 00000000 | 00000 |
| O | 0.316" | 3 3/4" | 1.9" | Round | 0.316" | Brad | 00000000 | 00000 |
| P | 0.323" | 4" | 1.9" | Round | 0.323" | Brad | 00000000 | 00000 |
| Q | 0.332" | 4" | 2" | Round | 0.332" | Brad | 00000000 | 00000 |
| R | 0.339" | 4" | 2" | Round | 0.339" | Brad | 00000000 | 00000 |
| S | 0.348" | 4" | 2" | Round | 0.348" | Brad | 00000000 | 00000 |
| T | 0.358" | 4 1/4" | 2.2" | Round | 0.358" | Brad | 00000000 | 00000 |
| U | 0.368" | 4 1/4" | 2.2" | Round | 0.368" | Brad | 00000000 | 00000 |
| V | 0.377" | 4 1/4" | 2.2" | Round | 0.377" | Brad | 00000000 | 00000 |
| W | 0.386" | 4 1/2" | 2.3" | Round | 0.386" | Brad | 00000000 | 00000 |
| X | 0.397" | 4 1/2" | 2.3" | Round | 0.397" | Brad | 00000000 | 000000 |
| Y | 0.404" | 4 1/2" | 2.3" | Round | 0.404" | Brad | 00000000 | 000000 |
| Z | 0.413" | 4 1/2" | 2.3" | Round | 0.413" | Brad | 00000000 | 000000 |
Metric | ||||||||
Uncoated Carbide | ||||||||
| 1.0 mm | 0.0394" | 38mm | 13mm | Round | 1mm | Brad | 00000000 | 00000 |
| 1.5 mm | 0.0591" | 38mm | 19mm | Round | 1.5mm | Brad | 00000000 | 00000 |
| 2.0 mm | 0.0787" | 44mm | 22mm | Round | 2mm | Brad | 00000000 | 00000 |
| 2.5 mm | 0.0984" | 50mm | 25mm | Round | 2.5mm | Brad | 00000000 | 00000 |
| 3.0 mm | 0.1181" | 57mm | 32mm | Round | 3mm | Brad | 00000000 | 00000 |
| 3.5 mm | 0.1378" | 63mm | 35mm | Round | 3.5mm | Brad | 00000000 | 00000 |
| 4.0 mm | 0.1575" | 63mm | 35mm | Round | 4mm | Brad | 00000000 | 00000 |
| 4.5 mm | 0.1772" | 70mm | 41mm | Round | 4.5mm | Brad | 00000000 | 00000 |
| 5.0 mm | 0.1968" | 76mm | 44mm | Round | 5mm | Brad | 00000000 | 00000 |
| 5.5 mm | 0.2165" | 76mm | 44mm | Round | 5.5mm | Brad | 00000000 | 00000 |
| 6.0 mm | 0.2362" | 82mm | 50mm | Round | 6mm | Brad | 00000000 | 00000 |
| 6.5 mm | 0.2559" | 82mm | 50mm | Round | 6.5mm | Brad | 00000000 | 00000 |
| 7.0 mm | 0.2756" | 89mm | 54mm | Round | 7mm | Brad | 00000000 | 00000 |
| 7.5 mm | 0.2953" | 95mm | 60mm | Round | 7.5mm | Brad | 00000000 | 00000 |
| 8.0 mm | 0.315" | 95mm | 60mm | Round | 8mm | Brad | 00000000 | 00000 |
| 8.5 mm | 0.3346" | 101mm | 63mm | Round | 8.5mm | Brad | 00000000 | 00000 |
| 9.0 mm | 0.3543" | 108mm | 70mm | Round | 9mm | Brad | 00000000 | 00000 |
| 9.5 mm | 0.374" | 108mm | 70mm | Round | 9.5mm | Brad | 00000000 | 000000 |
| 10.0 mm | 0.3937" | 114mm | 73mm | Round | 10mm | Brad | 00000000 | 000000 |
| 10.5 mm | 0.4134" | 114mm | 73mm | Round | 10.5mm | Brad | 00000000 | 000000 |
| 11.0 mm | 0.4331" | 114mm | 73mm | Round | 11mm | Brad | 00000000 | 000000 |
| 11.5 mm | 0.4528" | 120mm | 76mm | Round | 11.5mm | Brad | 00000000 | 000000 |
| 12.0 mm | 0.4724" | 120mm | 76mm | Round | 12mm | Brad | 00000000 | 000000 |
| 12.5 mm | 0.4921" | 120mm | 76mm | Round | 12.5mm | Brad | 00000000 | 000000 |
Hex-Shank Drill Bits
Black Oxide
Titanium Nitride (TiN) Coated
Insert these bits directly into power screwdrivers, impact drivers, and other tools that accept 1/4" hex shanks. A split point keeps the bit centered without a pilot hole.
Titanium-nitride (TiN) coated drill bits last longer and can drill at higher speeds than black-oxide drill bits.
For technical drawings and 3-D models, click on a part number.
Shank | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Type | Size | Point Style | Specifications Met | For Use On | Each | |
Inch—Jobbers' Length | ||||||||||
Black-Oxide High-Speed Steel | ||||||||||
| 7/64" | 0.1094" | 2 11/16" | 0.81" | Quick-Change Hex | 1/4" | Split | ASME B94.11M | Steel, Iron, Stainless Steel | 00000000 | 00000 |
| 9/64" | 0.1406" | 2 5/8" | 0.94" | Quick-Change Hex | 1/4" | Split | ASME B94.11M | Steel, Iron, Stainless Steel | 00000000 | 0000 |
| 7/16" | 0.4375" | 4" | 1.73" | Quick-Change Hex | 1/4" | Split | ASME B94.11M | Steel, Iron, Stainless Steel | 00000000 | 00000 |
Titanium-Nitride (TiN) Coated High-Speed Steel | ||||||||||
| 1/8" | 0.125" | 2 5/8" | 0.97" | Quick-Change Hex | 1/4" | Split | __ | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 0000 |
| 9/64" | 0.1406" | 2 3/4" | 1.08" | Quick-Change Hex | 1/4" | Split | __ | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 0000 |
| 5/32" | 0.1563" | 2 7/8" | 1.2" | Quick-Change Hex | 1/4" | Split | __ | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 0000 |
| 11/64" | 0.1719" | 3" | 1.22" | Quick-Change Hex | 1/4" | Split | __ | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 0000 |
| 3/16" | 0.1875" | 3" | 1.3" | Quick-Change Hex | 1/4" | Split | __ | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 0000 |
| 13/64" | 0.2031" | 3" | 1.31" | Quick-Change Hex | 1/4" | Split | __ | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 0000 |
| 7/32" | 0.2188" | 3 1/8" | 1.4" | Quick-Change Hex | 1/4" | Split | __ | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 0000 |
| 15/64" | 0.2344" | 3 1/8" | 1.44" | Quick-Change Hex | 1/4" | Split | __ | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 0000 |
| 1/4" | 0.25" | 3 1/4" | 1.5" | Quick-Change Hex | 1/4" | Split | __ | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 0000 |
| 9/32" | 0.2813" | 3 1/2" | 1.75" | Quick-Change Hex | 1/4" | Split | __ | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 00000 |
| 5/16" | 0.3125" | 4" | 2" | Quick-Change Hex | 1/4" | Split | __ | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 00000 |
| 11/32" | 0.3438" | 4" | 2" | Quick-Change Hex | 1/4" | Split | __ | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 00000 |
| 3/8" | 0.375" | 4" | 2" | Quick-Change Hex | 1/4" | Split | __ | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 00000 |
| 7/16" | 0.4375" | 4" | 2" | Quick-Change Hex | 1/4" | Split | __ | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 00000 |
| 1/2" | 0.5" | 4" | 2" | Quick-Change Hex | 1/4" | Split | __ | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 00000 |
Inch—Short Length | ||||||||||
Black-Oxide High-Speed Steel | ||||||||||
| 1/16" | 0.0625" | 2 1/2" | 0.39" | Quick-Change Hex | 1/4" | Split | __ | Steel, Iron, Stainless Steel | 00000000 | 0000 |
| 5/64" | 0.0781" | 2 9/16" | 0.48" | Quick-Change Hex | 1/4" | Split | __ | Steel, Iron, Stainless Steel | 00000000 | 0000 |
| 3/32" | 0.0938" | 2 5/8" | 0.55" | Quick-Change Hex | 1/4" | Split | __ | Steel, Iron, Stainless Steel | 00000000 | 0000 |
| 1/8" | 0.125" | 2 3/4" | 0.71" | Quick-Change Hex | 1/4" | Split | __ | Steel, Iron, Stainless Steel | 00000000 | 0000 |
| 5/32" | 0.1563" | 2 7/8" | 0.89" | Quick-Change Hex | 1/4" | Split | __ | Steel, Iron, Stainless Steel | 00000000 | 0000 |
| 11/64" | 0.1719" | 2 15/16" | 0.91" | Quick-Change Hex | 1/4" | Split | __ | Steel, Iron, Stainless Steel | 00000000 | 0000 |
| 3/16" | 0.1875" | 3" | 1.02" | Quick-Change Hex | 1/4" | Split | __ | Steel, Iron, Stainless Steel | 00000000 | 0000 |
| 13/64" | 0.2031" | 3 1/16" | 1.08" | Quick-Change Hex | 1/4" | Split | __ | Steel, Iron, Stainless Steel | 00000000 | 0000 |
| 7/32" | 0.2188" | 3 1/8" | 1.14" | Quick-Change Hex | 1/4" | Split | __ | Steel, Iron, Stainless Steel | 00000000 | 0000 |
| 15/64" | 0.2344" | 3 3/16" | 1.2" | Quick-Change Hex | 1/4" | Split | __ | Steel, Iron, Stainless Steel | 00000000 | 0000 |
| 1/4" | 0.25" | 3 1/4" | 1.26" | Quick-Change Hex | 1/4" | Split | __ | Steel, Iron, Stainless Steel | 00000000 | 0000 |
| 9/32" | 0.2813" | 3 3/8" | 1.41" | Quick-Change Hex | 1/4" | Split | __ | Steel, Iron, Stainless Steel | 00000000 | 0000 |
| 5/16" | 0.3125" | 3 1/2" | 1.52" | Quick-Change Hex | 1/4" | Split | __ | Steel, Iron, Stainless Steel | 00000000 | 0000 |
| 11/32" | 0.3438" | 3 5/8" | 1.64" | Quick-Change Hex | 1/4" | Split | __ | Steel, Iron, Stainless Steel | 00000000 | 0000 |
| 3/8" | 0.375" | 3 3/4" | 1.75" | Quick-Change Hex | 1/4" | Split | __ | Steel, Iron, Stainless Steel | 00000000 | 00000 |
| 1/2" | 0.5" | 4 1/4" | 2.51" | Quick-Change Hex | 1/4" | Split | __ | Steel, Iron, Stainless Steel | 00000000 | 00000 |
Drill Bits for Spot Welds
Three drill points allow these bits to separate spot-welded panels without damaging the bottom panel.
Drill bits with flat on shank are used in spot-weld drills, such as Spitznagel.
For technical drawings and 3-D models, click on a part number.
Shank | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Type | Size | Point Style | Features | Specifications Met | For Use On | Each | |
Inch | |||||||||||
Uncoated High-Speed Steel | |||||||||||
| 1/4" | 0.25" | 1 1/2" | 0.04" | Round | 1/4" | Brad | Flat on Shank | NAS907 Type J | Steel, Iron, Aluminum, Brass, Bronze, Plastic | 000000 | 000000 |
| 1/4" | 0.25" | 1 9/16" | 0.04" | Round | 1/4" | Brad | Flat on Shank | NAS907 Type J | Steel, Iron, Aluminum, Brass, Bronze, Plastic | 000000 | 00000 |
| 5/16" | 0.3125" | 1 1/2" | 0.04" | Round | 5/16" | Brad | Flat on Shank | NAS907 Type J | Steel, Iron, Aluminum, Brass, Bronze, Plastic | 000000 | 00000 |
| 5/16" | 0.3125" | 1 9/16" | 0.04" | Round | 5/16" | Brad | Flat on Shank | NAS907 Type J | Steel, Iron, Aluminum, Brass, Bronze, Plastic | 000000 | 00000 |
| 5/16" | 0.3125" | 1 11/16" | 0.04" | Round | 5/16" | Brad | Flat on Shank | NAS907 Type J | Steel, Iron, Aluminum, Brass, Bronze, Plastic | 000000 | 00000 |
| 5/16" | 0.3125" | 2 1/4" | 0.07" | Round | 5/16" | Brad | __ | NAS907 Type J | Steel, Iron, Aluminum, Brass, Bronze, Plastic | 000000 | 00000 |
| 13/32" | 0.406" | 2 1/4" | 0.07" | Round | 13/32" | Brad | __ | NAS907 Type J | Steel, Iron, Aluminum, Brass, Bronze, Plastic | 000000 | 00000 |
Hex-Shank Drill Bits with Guide for Countersunk Holes
The built-in guide has a beveled tip that fits into countersunk holes in hardware, such as hinges and latches, to center the bit. Guides are spring loaded; drilling pressure compresses the guide body and extends the drill bit into the workpiece. Insert directly into power screwdrivers, impact drivers, and other tools that accept a 1/4" hex shank. Also known as Vix bits.
For technical drawings and 3-D models, click on a part number.
Drill Bits with Guide | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | Replacement Drill Bits | ||||||||||||
| For Screw Size | Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Type | Size | Guide Material | Point Style | For Use On | Each | Each | ||
Inch | |||||||||||||
Uncoated High-Speed Steel | |||||||||||||
| No. 2, No. 3, No. 4 | 5/64" | 0.0781" | 3 7/8" | 0.62" | Quick-Change Hex | 1/4" | Steel | Standard | Steel, Aluminum, Brass, Bronze, Plastic, Wood | 0000000 | 000000 | 0000000 | 00000 |
| No. 5, No. 6 | 7/64" | 0.1094" | 3 7/8" | 0.62" | Quick-Change Hex | 1/4" | Steel | Standard | Steel, Aluminum, Brass, Bronze, Plastic, Wood | 0000000 | 00000 | 0000000 | 0000 |
| No. 8, No. 9, No. 10 | 9/64" | 0.1406" | 3 7/8" | 0.62" | Quick-Change Hex | 1/4" | Steel | Standard | Steel, Aluminum, Brass, Bronze, Plastic, Wood | 0000000 | 00000 | 0000000 | 0000 |
| No. 12 | 11/64" | 0.1719" | 4 1/2" | 0.62" | Quick-Change Hex | 1/4" | Steel | Standard | Steel, Aluminum, Brass, Bronze, Plastic, Wood | 0000000 | 00000 | 0000000 | 0000 |
| No. 14 | 13/64" | 0.2031" | 4 1/2" | 0.62" | Quick-Change Hex | 1/4" | Steel | Standard | Steel, Aluminum, Brass, Bronze, Plastic, Wood | 0000000 | 00000 | 0000000 | 0000 |
Drill Bit Sets for Precise Holes in Wood
Three sharp points allow these bits to drill accurate straight and overlapping holes, even across the grain. The center guide point prevents the bit from wandering. Also known as brad-point bits.
For technical drawings and 3-D models, click on a part number.
| Number of Pieces | Drill Bit Sizes Included | Point Style | For Use On | Each | |
Inch | |||||
|---|---|---|---|---|---|
Black-Oxide Steel | |||||
| 5 | 3/16", 1/4", 5/16", 3/8", 1/2" | Brad | Wood | 0000000 | 000000 |
Hex-Shank Drill Bit Sets
Insert these bits directly into power screwdrivers, impact drivers, and other tools that accept 1/4" hex shanks. They are titanium nitride (TiN) coated for wear and temperature resistance.
For technical drawings and 3-D models, click on a part number.
| Number of Pieces | Drill Bit Sizes Included | Lg. Class | Shank Type | Shank Size | Point Style | For Use On | Each | |
Inch | ||||||||
|---|---|---|---|---|---|---|---|---|
Titanium-Nitride (TiN) Coated High-Speed Steel | ||||||||
| 5 | 1/8"-1/4" (increments of 1/32") | Jobbers' Length | Quick-Change Hex | 1/4" | Split | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 000000 |
| 7 | 2 of size 1/8" 1 each of sizes 5/32", 3/16", 7/32", 1/4", and 5/16" | Jobbers' Length | Quick-Change Hex | 1/4" | Split | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 00000 |
| 10 | 2 of size 1/8" 1 each of sizes 9/64", 5/32", 11/64", 3/16", 7/32", 1/4", 5/16", and 3/8" | Jobbers' Length | Quick-Change Hex | 1/4" | Split | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 00000 |