We will reply to your message within an hour.
More
From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications.
Polished to either a brushed or mirror-like finish, this material is often used to fabricate decorative enclosures and industrial workstations.
When compared to standard 304 stainless steel, this material can be machined faster with less wear on cutting tools. It's also called Prodec and Project 70+.
This material has tighter tolerances than standard 304 stainless steel.
The textured surface hides fingerprints and dents. This material is widely used in decorative applications, such as partitions and handrails.
This material has tighter tolerances than standard 303 stainless steel.
Widely used for fabricating fittings and fasteners, 303 stainless steel machines quickly without sticking to cutting tools.
Offering outstanding resistance to surface wear and corrosion, Nitronic 60 stainless steel is often used for shafts, fasteners, and valves.
The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.
This material is precision ground to offer tighter tolerances than standard 316 stainless steel.
These rods have been passivated for enhanced corrosion resistance.
This material machines faster with less wear on cutting tools than standard 316 stainless steel. It's also called Prodec and Project 70+.
2205 stainless steel resists cracking even when faced with a combination of tensile stress, corrosive chemicals, and heat. Also known as duplex stainless steel, it has twice the strength of 316 stainless steel. Use it for high-pressure applications in caustic environments.
A high nickel content allows Alloy 20 stainless steel to stand up to harsh chemicals in caustic environments. It's also known as Carpenter 20.
Stronger and more corrosion resistant than 316 stainless steel, Nitronic 50 is especially well-suited for use as shafts and fixtures in marine environments.
With a diameter that’s held to a close tolerance, this material is hardened for increased wear and abrasion resistance.
Ready for turning in your lathe, these rods are precision ground to a tight tolerance.
One of the hardest types of stainless steel after heat treating, 440C offers excellent wear and abrasion resistance. It's often used for bearings, valves, and knife blades.
Suitable for making molds, 420 stainless steel is a hard, wear-resistant material that can be finely polished to a very smooth surface.
Precision ground to a tight diameter tolerance, these rods are all set for turning applications in a lathe.
Often used for fasteners and valves, 410 stainless steel withstands wear caused by abrasion.
One of the most machinable types of stainless steel available, 416 contains sulfur for fast machining without clogging cutting tools. It's used for gears, screws, and shafts.
Hardened for superior wear resistance, these rods are precision ground to a tight diameter tolerance so they’re ready for turning in a lathe.
With a higher chromium content than 15-5 PH stainless steel, this high-strength 17-4 PH offers better corrosion resistance. It is also known as 630 stainless steel.
Hardened for improved strength and wear resistance, these rods are precision ground to a strict diameter tolerance. Use them for turning applications in your lathe.
Each piece is precision ground to offer tighter tolerances than standard 17-4 PH stainless steel.
Also known as Project 70+, this material machines faster with less wear on cutting tools than standard 17-4 PH stainless steel.
This material is hardened for improved strength and wear resistance.
13-8 PH stainless steel can be hardened at lower temperatures than other heat-treatable types of stainless steel. It is widely used for fittings, pins, and lock washers.
Widely used to fabricate fasteners and engine components, A286 will maintain its strength as temperatures rise.
Offering outstanding strength, 15-5 PH stainless steel is often used for gears and shafts.
Able to withstand temperatures up to 2100° F, 330 stainless steel is widely used as components for industrial furnaces, gas turbines, and boilers. It resists cracking when exposed to heating and cooling cycles.
The titanium content of 321 stainless steel preserves corrosion resistance around weld points.
309/310 stainless steel has high levels of chromium and nickel to provide good corrosion resistance at elevated temperatures. It's often used in heat exchangers and furnaces.
Made of 316 stainless steel, this framing has excellent resistance to chemicals and salt water.
Screw and nut sets or nuts secure brackets and other accessories to rails.
Add a convenient grip to steer carts or open and close doors, windows, and drawers made of T-slotted framing.
Stay organized with hooks, bin boxes, shelves, and tool holders that work with T-slotted framing.
Use hinges to add doors, lids, and machine guards to T-slotted framing.
Secure doors and windows made of T-slotted framing to protect valuables or restrict access for safety.
Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.
Create continuous runs of channel without corners.
Up to two times the height of regular strut channel, this high-profile channel is stronger than regular strut channel.
Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.
This welded, one-piece strut channel combines two strut channels back-to-back.
Securely fasten strut channel to the floor.
Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.
A tab on the end of these shelf brackets fits inside the strut channel for extra stability.
Position two strut channels at a 30° to 90° angle, then tighten the bolt to secure.
A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.
Serrated grooves grip the lip of the channel.
Also known as insert nuts, these convert slotted holes to threaded round holes and keep them centered in the channel.
In addition to serrated grooves for gripping the lip of the channel, these nuts have wings for easy positioning.
There's no need for additional fasteners with these nuts—they combine a strut channel nut with a spring and a threaded stud.
Keep hardware centered in the strut channel slot.
Add hardware to strut channel without having to hold the washer in place or reach inside the channel.
Use with hex nuts to connect threaded rod.
Notches on these washers grip the channel to keep them in place.
Support the corners of strut channel structures.
Create a four-sided raceway for cable, or give a more finished look to strut channel structures.
Cover rough ends of strut channel.
Create posts of varying lengths.
Close off openings in structures while allowing air to pass through.
Build test fixtures, prototypes, and other small structures with this miniature version of T-slotted framing and fittings.
Protect harsh environment M12 connectors when not in use.
Protect harsh environment mini connectors when not in use.
Join two connectors that both have internal threads.
Pick up screws, nuts, and other small steel objects.
Often used to pick up steel sheets, the magnet holds material until you press the lever to disengage it.
The head pivots, so you can pick up screws, nuts, bolts, and other small steel objects from any angle.
Slip these posts and rails together for a complete railing—no fittings required.
Designed for use with right-hand, internally threaded rod ends, these rods have right-hand threads on both ends. Use them for remote valve operators, throttle controllers, shifting mechanisms, and virtually any push/pull assembly.
Designed for use with right-hand, externally threaded rod ends, these rods have right-hand threads on both ends. Use them for remote valve operators, throttle controllers, shifting mechanisms, and virtually any push/pull assembly.
Similar to turnbuckles, these rods have right-hand threads on one end and left-hand threads on the other so you can make a linkage that adjusts for tension. Add right- and left-hand threaded rod ends to build your linkages.
Similar to turnbuckles, these rods have right-hand threads on one end and left-hand threads on the other so you can make a linkage that adjusts for tension.
18-8 stainless steel threaded rods have good chemical resistance.
Available in metric sizes, these 18-8 stainless steel threaded rods have good chemical resistance.
Tighten these threaded rods by turning them to the left; once fastened, they resist loosening from counterclockwise motion.
Stronger and more wear resistant than 18-8 stainless steel, these threaded rods are mildly chemical resistant. They meet the pressure and temperature requirements of ASTM A193 and are often used to secure pressure tanks, valves, and flanges.
Grade B8 threaded rods meet the pressure and temperature requirements of ASTM A193 and are often used to secure pressure tanks, valves, and flanges. They have good chemical resistance.
More corrosion resistant than 18-8 and 410 stainless steel threaded rods, these 316 stainless steel rods have excellent resistance to chemicals and salt water.
These metric 316 stainless steel threaded rods are more corrosion resistant than 18-8 and 410 stainless steel threaded rods and have excellent resistance to chemicals and salt water.
Grade B8M threaded rods meet the pressure and temperature requirements of ASTM A193 and are often used to secure pressure tanks, valves, and flanges.
These hardened 316 stainless steel threaded rods are 40% stronger than standard Grade B8M threaded rods. They meet the pressure and temperature requirements of ASTM A193 and are often used to secure pressure tanks, valves, and flanges.
The most corrosion resistant stainless steel threaded rods we offer, these Alloy 20 stainless steel threaded rods contain nickel to withstand exposure to sulfuric, phosphoric, and nitric acids.
Ideal for environments that require frequent cleaning, such as food and pharmaceutical manufacturing, these rods have a removable cover that protects their threads from dirt and grime.
Add safety and convenience to your wall and tank ladders. Posts extend above the ladder top and lock in place to guide you and provide stability.
Connect float valve bodies and floats with these rods.