Maximum No-Load Speed Maximum No-Load Speed |
---|
|
Weight Weight |
---|
|
Plug Type Plug Type |
---|
|
Load Capacity Load Capacity |
---|
|
|
Hold one buffing or polishing wheel on each spindle.
Wheel guards (sold separately) protect your work area from flying debris. Guard for 8" buffing wheel diameter includes a right side and a left side wheel guard.
For Buffing Wheel | Overall | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Dia. | Dia. | Thick. | Max. No-Load Speed, rpm | Power, hp | Motor Shaft Dia. | Lg. | Wd. | Ht. | Wt., lbs. | Control Type | Current (Voltage) | Plug Type | Each | |
1/2" | 6" | 1/4"-1" | 1,800 | 1/4 | 1/2" | 18 1/2" | 10" | 10 1/2" | 17 | On/Off Switch | 2.8A (120V AC) | Three Prong | 000000 | 0000000 |
1/2" | 6" | 1/2"-3/4" | 3,600 | 1/3 | 1/2" | 19" | 7 3/4" | 9 3/4" | 25 | On/Off Switch | 4.2A (120V AC) | Three Prong | 0000000 | 000000 |
3/4" | 8" | 3/8"-1 1/4" | 3,600 | 3/4 | 3/4" | 28 1/2" | 8 1/2" | 11 1/2" | 56 | On/Off Switch | 2.4A (240V AC) 4.8A (120V AC) | Three Prong | 0000000 | 000000 |
Base | ||||||
---|---|---|---|---|---|---|
Ht. | Wd. | Dp. | Wt., lbs. | Material | Each | |
32 7/8" | 15 3/4" | 14" | 62 | Iron | 000000 | 0000000 |
For Buffing Wheel Dia. | Exhaust Vent Dia. | Material | For Buffer Shaft Location | Includes | Each | |
6" | 4" | Steel | Right Side and Left Side | Left & Right Wheel Guard, Mounting Fasteners, Mounting Hardware | 0000000 | 0000000 |
8" | 4" | Steel | Right Side and Left Side | Left & Right Wheel Guard, Mounting Fasteners, Mounting Hardware | 0000000 | 000000 |
Use one wheel for buffing and the other wheel for occasional tool cleaning, sharpening, and touch-up work.
For Buffing Wheel | For Grinding Wheel | No-Load Speed, rpm | Overall | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Arbor Hole Dia. | Max. Dia. | Arbor Hole Dia. | Max. Dia. | Max. Thick. | Min. | Max. | Power, hp | Motor Shaft Dia. | Lg. | Wd. | Ht. | Wt., lbs. | Control Type | Current (Voltage) | Plug Type | Includes | Each | |
Variable Speed | ||||||||||||||||||
3/8" | 4" | 1/4" | 2" | 3/4" | 500 | 7,000 | 1/6 | 5/16" | 13" | 5" | 5 1/8" | 8 | Dial | 1.8A (120V AC) | Three Prong | Tapered Spindle for Buffing Wheels 3" Diameter Buffing Wheel Wheel Arbor for Grinding Wheels 1 3/4" Diameter Grinding Wheel | 000000 | 0000000 |
Attach polishing bonnets to the included backup pad or attach buffing wheels with a threaded arbor hole directly to the threaded spindle. The two-position side handle allows left- and right-hand operation.
Eliminate swirl marks without damaging painted surfaces. Also known as a random-orbital polisher. The counterbalanced bottom plate reduces vibration.
For Bonnet Dia. | Max. No-Load Speed | Wt., lbs. | Control Type | Current (Voltage) | Plug Type | Includes | Each | |
One Speed | ||||||||
---|---|---|---|---|---|---|---|---|
10" | 3,200 orbits/min. | 9 | On/Off Switch | 0.8A (120V AC) | Two Prong | Two Terry Cloth Polishing Bonnets Two Terry Cloth Applicator Bonnets Two Polyester Polishing Bonnets One Polyester Wash Mitt | 000000 | 000000 |
Attach polishing bonnets to the included backup pad or attach buffing wheels with a threaded arbor hole directly to the threaded spindle. The two-position side handle allows left- and right-hand operation.
Air Inlet | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Spindle Thread Size | Max. No-Load Speed, rpm | Power, hp | Average Air Consumption | O'all Lg. | Wt., lbs. | Control Type | Exhaust Port Location | For Air Hose ID | Pipe Size | Thread Type | Gender | Includes | Each | |
Variable Speed | ||||||||||||||
5/8"-11 | 2,500 | 2/5 | 8 cfm @ 90 psi | 16" | 4 1/2 | Lever | Front | 3/8" | 1/4 | NPT | Female | 7" Diameter Backup Pad | 00000000 | 0000000 |
Use these air-powered tools with lapping sticks and smoothing and polishing stones. Also known as profilers. Polishers must be used with an air filter/regulator/lubricator (sold separately).
For Max. Stone | Air Inlet | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Thick. | Stroke Lg. | Max. No-Load Speed, strokes/min. | Average Air Consumption | O'all Lg. | Wt., lbs. | Control Type | Exhaust Port Location | For Air Hose ID | Pipe Size | Thread Type | Gender | Each | |
Variable Speed | ||||||||||||||
1/2" | 1/4" | 0.028" | 28,000 | 1.8 cfm @ 90 psi | 8" | 1/2 | Dial | Rear | 3/8" | 1/4 | NPT | Female | 0000000 | 0000000 |
1/2" | 1/4" | 0.118" | 10,000 | 2.8 cfm @ 90 psi | 8" | 3/4 | Dial | Rear | 3/8" | 1/4 | NPT | Female | 0000000 | 000000 |
Air Filter/Regulator/Lubricator | 00000000 | Each | 0000000 |
Before you buff, use these bonnets for easy application of waxes and polishes. Attach to the backup pad on your portable polishing tool. Order a bonnet one size larger than your pad.
Dia. | Max. Speed, rpm | For Surface Type | Pkg. Qty. | Pkg. | |
Terry Cloth with Elastic Mount | |||||
---|---|---|---|---|---|
10" | 3,200 | Flat | 2 | 0000000 | 00000 |
These bonnets won’t leave swirl marks or scratches when polishing waxed surfaces. Attach to the backup pad on your portable polishing tool. Order a bonnet one size larger than your pad.
Keep parts in constant motion for faster finishing than tumbling machines. Fill with media and run wet or dry to finish multiple parts at the same time. These machines can be filled to 100% capacity.
Bowl | Overall | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Load Cap., lbs. | Cap., cu. ft. | Inside Dia. | Inside Ht. | Material | Dia. | Ht. | hp | Current, A | Cord Lg., ft. | Vibration Setting Type | Control Type | Wt., lbs. | Each | |
For Ceramic, Corn Cob, Plastic, Porcelain, Steel, and Walnut Shells | ||||||||||||||
120V AC—Three-Prong Plug | ||||||||||||||
10 | 0.1 | 10" | 4" | Plastic | 10" | 11" | 1/30 | 1.1 | 6 | Fixed | Switch | 8 | 00000000 | 0000000 |
18 | 0.2 | 12" | 4 1/2" | Plastic | 12" | 12 1/2" | 1/20 | 1.6 | 6 | Fixed | Switch | 15 | 00000000 | 000000 |
57 | 0.6 | 17" | 6" | Plastic | 17" | 18" | 1/20 | 1.6 | 6 | Adjustable | Switch | 23 | 00000000 | 000000 |
240V AC—Three-Prong Plug | ||||||||||||||
18 | 0.2 | 12" | 4 1/2" | Plastic | 12" | 15" | 1/20 | 0.7 | 6 | Fixed | Switch | 15 | 00000000 | 000000 |
The thick bowl can handle steel media and heavy loads. These machines keep parts in constant motion for faster finishing than tumbling machines. The clear lid lets you see work in progress and the drain makes cleanup easier. Fill with media and run wet or dry to finish multiple parts at the same time. Machines can be filled to 100% capacity. They cannot be sold to Canada due to local energy efficiency regulations.
Bowl | Overall | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Media Material (Load Capacity) | Cap., cu. ft. | Inside Dia. | Inside Ht. | Material | Dia. | Ht. | hp | Current, A | Cord Lg., ft. | Vibration Setting Type | Control Type | Wt., lbs. | Cannot Be Sold To | Each | |
120V AC—Three-Prong Plug | |||||||||||||||
Steel (120 lbs.) Ceramic (50 lbs.) Corn Cob, Plastic, Porcelain, Walnut Shells (Not Rated) | 0.25 | 14" | 6" | Plastic | 14" | 20" | 1/4 | 5 | 5 | Adjustable | Timer | 38 | Canada | 00000000 | 000000000 |
Steel (230 lbs.) Ceramic (90 lbs.) Corn Cob, Plastic, Porcelain, Walnut Shells (Not Rated) | 0.5 | 17" | 7 1/2" | Plastic | 17" | 22" | 1/3 | 5.9 | 5 | Adjustable | Timer | 45 | Canada | 00000000 | 00000000 |
Steel (340 lbs.) Ceramic (150 lbs.) Corn Cob, Plastic, Porcelain, Walnut Shells (Not Rated) | 1 | 20" | 9" | Plastic | 20" | 24" | 1/2 | 8.8 | 5 | Adjustable | Timer | 63 | Canada | 00000000 | 00000000 |
Use for large, heavy loads. The rotating motion of these machines aggressively deburrs and polishes. Fill with media to maximum of 75% capacity and run wet or dry to finish multiple parts at the same time.
Tumbling Machines | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Barrel | Overall | Replacement Barrels | |||||||||||||||||
Load Cap., lbs. | Cap., cu. ft. | No. of | Inside Dia. | Inside Dp. | Material | Lining Material | Speed, rpm | Ht. | Wd. | Dp. | hp | Current, A | Cord Lg., ft. | Control Type | Wt., lbs. | Each | Each | ||
For Ceramic, Corn Cob, Plastic, Porcelain, Steel, and Walnut Shells | |||||||||||||||||||
120V AC—Three-Prong Plug | |||||||||||||||||||
20 | 0.2 | 1 | 7 1/2" | 7" | Steel | Rubber | 34 | 18" | 16" | 18" | 1/6 | 2.8 | 7 | Switch | 58 | 0000000 | 0000000 | 0000000 | 0000000 |
40 | 0.48 | 1 | 9" | 11 7/8" | Steel | Rubber | 34 | 18" | 28" | 18" | 1/6 | 2.8 | 7 | Switch | 78 | 0000000 | 000000 | 0000000 | 000000 |
The rotating motion of these machines aggressively deburrs and polishes. Fill with media to maximum of 60% capacity and run wet or dry to finish multiple parts at the same time.
Tumbling Machines | ||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Barrel | Overall | Replacement Barrels | Replacement Belts | |||||||||||||||||
Load Cap., lbs. | Cap., cu. ft. | No. of | Inside Dia. | Inside Dp. | Material | Speed, rpm | Ht. | Wd. | Dp. | hp | Current, A | Cord Lg., ft. | Control Type | Wt., lbs. | Each | Each | Each | |||
For Ceramic, Corn Cob, Plastic, Porcelain, Steel, and Walnut Shells | ||||||||||||||||||||
120V AC—Two-Prong Plug | ||||||||||||||||||||
3 | 0.033 | 1 | 4 1/4" | 4" | Rubber | 32-36 | 7 1/2" | 6" | 8 1/2" | 1/75 | 0.5 | 4 | Plug | 4 | 00000000 | 0000000 | 00000000 | 000000 | 00000000 | 00000 |
6 | 0.067 | 2 | 4 1/4" | 4" | Rubber | 32-36 | 7 1/2" | 11" | 6" | 1/75 | 0.5 | 4 | Plug | 6 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 0000 |
9 | 0.1 | 1 | 7" | 4" | Rubber | 24-28 | 10" | 6" | 11" | 1/75 | 0.5 | 4 | Plug | 6 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 0000 |
15 | 0.167 | 1 | 7" | 8" | Rubber | 20-22 | 11 1/2" | 11" | 11" | 1/50 | 0.8 | 4 | Plug | 13 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 0000 |
Automate sanding on your line by attaching these sanders to a robot arm. Compared to sanders operated by humans, these apply the same force and pattern for a more consistent and repeatable finish. To program them, connect them to your robot controller using the solenoid valves with wire leads. They’re certified by Universal Robots (UR), which means they’ve validated that these sanders are compatible with their arms. To help ensure an accurate finish, use a force torque sensor (not included).
Attach these sanders to your robot’s wrist with mounts for end of robot arm and robot tool (each sold separately). The mounts for end of robot arm have a mounting pattern that conforms to ISO 31.5 mm, 40 mm, and 50 mm, so they’ll work with most industrial robots and cobots. Since they’re a quick-connect tool changer, they let you switch out one sander for another without taking apart hardware.
Add an air coupler to install your own quick-connect fittings for the air input on these sanders.
Disc sanders, or random orbital sanders, move in both circular and back and forth motions. That’s why they leave minimal swirl patterns and aren’t limited to moving with the grain of your workpiece. However, these sanders can’t fit into corners because their pads are circular.
Sheet sanders use rectangular sanding sheets that are good for fitting into corners, but they must sand with the grain pattern of your workpiece. Sanders for 8"-long sheets only move back and forth; they’re known as inline sanders. Those for 7"-long sheets move in an orbital motion and are known as jitterbug sanders.
Sanders with a 3/8" stroke length are good for aggressive sanding that produces a rough finish (best for grits 16 to 80), such as grinding and deburring. Sanders with a 3/16" stroke length work for general purpose sanding (best for grits 100 to 240), such as deburring, texturing, and adding smooth finishes. Sanders with a 3/32" stroke length are for ultra-fine sanding (best for grits greater than 280), including extra-smooth finishing and polishing.
Add a debris collection system to keep the area clean. If you’re using them in a hazardous location where large amounts of debris could be flammable, be sure to use a system that’s certified for your location.
For Disc | For Sheet | Spindle | Air Inlet | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Stroke Lg. | Dia. | Mount Type | Lg. | Wd. | Max. No-Load Speed | Power, hp | Thread Size | Gender | Average Air Consumption @ Pressure | O'all Lg. | Wt. | Pipe Size | Thread Type | Gender | Includes | Each | |
Disc | |||||||||||||||||
3/16" | 5" | Hook and Loop | __ | __ | 12,000 rpm | 0.28 | 5/16"-24 | Male | 18 cfm @ 90 psi | 5" | 3.3 lbs. / 1.5 kg | 1/4 | NPT | Female | Solenoid Valve with Wire Leads | 00000000 | 000000000 |
3/16" | 6" | Hook and Loop | __ | __ | 12,000 rpm | 0.28 | 5/16"-24 | Male | 18 cfm @ 90 psi | 5" | 3.3 lbs. / 1.5 kg | 1/4 | NPT | Female | Solenoid Valve with Wire Leads | 00000000 | 00000000 |
3/32" | 5" | Hook and Loop | __ | __ | 12,000 rpm | 0.28 | 5/16"-24 | Male | 18 cfm @ 90 psi | 5" | 3.3 lbs. / 1.5 kg | 1/4 | NPT | Female | Solenoid Valve with Wire Leads | 00000000 | 00000000 |
3/32" | 6" | Hook and Loop | __ | __ | 12,000 rpm | 0.28 | 5/16"-24 | Male | 18 cfm @ 90 psi | 5" | 3.3 lbs. / 1.5 kg | 1/4 | NPT | Female | Solenoid Valve with Wire Leads | 00000000 | 00000000 |
Sheet | |||||||||||||||||
3/8" | __ | __ | 8" | 2 3/4" | 2,400 strokes/min. | 0.3 | __ | __ | 18 cfm @ 90 psi | 5 1/4" | 3.7 lbs. / 1.7 kg | 1/4 | NPT | Female | Solenoid Valve with Wire Leads | 00000000 | 00000000 |
3/32" | __ | __ | 7" | 3 2/3" | 10,000 rpm | 0.28 | __ | __ | 18 cfm @ 90 psi | 5 1/4" | 2.4 lbs. / 1 kg | 1/4 | NPT | Female | Solenoid Valve with Wire Leads | 00000000 | 00000000 |
Bolt Circle Dia. (Mount. Hole Pattern Compatibility) | Mounting Fasteners Included | Mounting Plate Dia., mm | Max. Load Cap. | Wt. | Lg., mm | Each | |
Low Profile—Black PTFE-Coated Aluminum | |||||||
---|---|---|---|---|---|---|---|
31.5 mm (ISO 31.5) 40 mm (ISO 40) 50 mm (ISO 50) | Yes | 83 | 110 lbs. / 50 kg | 0.53 lbs. / 0.24 kg | 19 | 00000000 | 0000000 |
Mounting Plate | |||||||
---|---|---|---|---|---|---|---|
Bolt Hole Thread Size (No. of Holes) | Mounting Fasteners Included | Lg., mm | Wd., mm | Wt. | Lg., mm | Each | |
Low Profile—Black PTFE-Coated Aluminum | |||||||
M6 (4) | No | 62 | 38 | 0.16 lbs. / 0.07 kg | 12 | 00000000 | 000000 |
Female Threaded Air Connection | Female Quick-Disconnect Air Connection | Male Threaded Air Connection | Male Quick-Disconnect Air Connection | ||||||
---|---|---|---|---|---|---|---|---|---|
Pipe Size | Thread Type | Coupling Size | Quick-Disconnect Shape | Pipe Size | Thread Type | Coupling Size | Quick-Disconnect Shape | Each | |
1/4 | NPT | 1/4 | Industrial | 1/4 | NPT | 1/4 | Industrial | 00000000 | 000000 |
For Disc | For Sheet | Spindle | Air Inlet | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Stroke Lg. | Dia. | Mount Type | Lg. | Wd. | Max. No-Load Speed | Power, hp | Thread Size | Gender | Average Air Consumption @ Pressure | O'all Lg. | Wt. | Pipe Size | Thread Type | Gender | Each | |
Disc | ||||||||||||||||
3/16" | 5" | Hook and Loop | __ | __ | 12,000 rpm | 0.28 | 5/16"-24 | Male | 18 cfm @ 90 psi | 5" | 3.3 lbs. / 1.5 kg | 1/4 | NPT | Female | 00000000 | 000000000 |
3/16" | 6" | Hook and Loop | __ | __ | 12,000 rpm | 0.28 | 5/16"-24 | Male | 18 cfm @ 90 psi | 5" | 3.3 lbs. / 1.5 kg | 1/4 | NPT | Female | 00000000 | 00000000 |
3/32" | 5" | Hook and Loop | __ | __ | 12,000 rpm | 0.28 | 5/16"-24 | Male | 18 cfm @ 90 psi | 5" | 3.3 lbs. / 1.5 kg | 1/4 | NPT | Female | 00000000 | 00000000 |
3/32" | 6" | Hook and Loop | __ | __ | 12,000 rpm | 0.28 | 5/16"-24 | Male | 18 cfm @ 90 psi | 5" | 3.3 lbs. / 1.5 kg | 1/4 | NPT | Female | 00000000 | 00000000 |
Sheet | ||||||||||||||||
3/8" | __ | __ | 8" | 2 3/4" | 2,400 strokes/min. | 0.3 | __ | __ | 18 cfm @ 90 psi | 5 1/4" | 3.7 lbs. / 1.7 kg | 1/4 | NPT | Female | 00000000 | 00000000 |
3/32" | __ | __ | 7" | 3 2/3" | 10,000 rpm | 0.28 | __ | __ | 18 cfm @ 90 psi | 5 1/4" | 2.4 lbs. / 1 kg | 1/4 | NPT | Female | 00000000 | 00000000 |