Polyethylene Anchors | McMaster-Carr

Filter by

Material

Anchor Type

System of Measurement

Screw Size

Color

Drill Bit Size

Drive Style

Length

Fastener Head Type

For Use In

Screw Length

Connection Hardware

Plug Anchor Type

Ultimate Shear Strength

Not Rated

Ultimate Pull-Out Strength

Minimum Temperature

Maximum Temperature

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

REACH

RoHS

DFARS Specialty Metals

Exempt

Drill Bit Decimal Size Equivalent

Finish

Thread Direction

Performance

88 Products

Anchors for Drywall

The traditional, economical choice for mounting lightweight switches, security cameras, and clocks into drywall. All of these anchors expand against your hole’s walls to reinforce your mounting hole and resist pullout.

To install, drill a hole slightly deeper than the anchor is long. Next, insert the anchor until it's flush with the surface. Then, thread a tapping screw through your component into the anchor and tighten. Remove your component by unfastening the screw, but the anchor itself cannot be removed.

Anchors

Conical

Conical—Ridges on the body prevent spinning during installation, making it easy to tighten down the screw.

					Ultimate Strength
	For Screw Size	Lg.	Drill Bit Size	Material	Pull-Out	Shear	Pkg. Qty.		Pkg.
Conical



		No. 4, No. 5, No. 6, No. 7, No. 8	3/4"	3/16"	Polyethylene	Not Rated	Not Rated	100	97068A110	00000


		No. 6, No. 7, No. 8, No. 9, No. 10	7/8"	3/16"	Polyethylene	Not Rated	Not Rated	100	97068A120	0000
		No. 10, No. 12	1"	1/4"	Polyethylene	Not Rated	Not Rated	100	97068A130	0000
		No. 14, No. 16	1 3/8"	5/16"	Polyethylene	Not Rated	Not Rated	100	97068A140	0000

Anchors with Screw

Conical—Ridges on the body prevent spinning during installation, making it easy to tighten down the screw.

	Screw							Ultimate Strength
	Size	Lg.	Lg.	Drill Bit Size	Fastener Head Type	Drive Style	Material	Pull-Out	Shear	Pkg. Qty.		Pkg.
Conical



		No. 6	1"	3/4"	3/16"	Rounded	Phillips	Polyethylene	Not Rated	Not Rated	100	98547A110	000000


		No. 6	1"	3/4"	3/16"	Rounded	Phillips/Slotted	Polyethylene	Not Rated	Not Rated	100	98547A121	00000
		No. 6	1"	7/8"	3/16"	Rounded	Phillips	Polyethylene	Not Rated	Not Rated	100	98547A112	00000
		No. 10	1"	1"	1/4"	Rounded	Phillips	Polyethylene	Not Rated	Not Rated	100	98547A114	00000
		No. 10	1"	1"	1/4"	Rounded	Slotted	Polyethylene	Not Rated	Not Rated	100	98547A119	00000
		No. 10	1"	1"	1/4"	Hex	Slotted	Polyethylene	Not Rated	Not Rated	100	98547A118	00000
		No. 14	1.25"	1 3/8"	5/16"	Rounded	Phillips	Polyethylene	Not Rated	Not Rated	50	98547A116	00000

Cut-to-Length Perforated Cable Ties

Keep a roll on hand for bundles big and small. Snip off the length you need and then thread the end through one of the perforations to secure. Lighter than our other plastic ties but not as strong, these won’t weigh down tubing and wire.

Polyethylene—The most flexible plastic ties, these bend and twist without cracking. They also resist moisture.

				Yellow
	Lg., ft.	Breaking Strength	Wd.	UV Protection		Each
Polyethylene







				Extra Wide

				500	Not Rated	0.56"	None	14655T12	000000

Flexible Shackles for Lifting

A flexible and lightweight option for lifting. Made of polyethylene rope with a nylon cover, these shackles wrap around a variety of lifting points without marring surfaces. All meet ASME specifications for rigging and lifting equipment. To close them, pull the bar through the loop and slide the rubber lock over each end of the bar. Keep these shackles away from sharp edges, which could cause them to break and fail.

Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.

Specs. Met		Each







Polyethylene Rope with Nylon Fabric Cover

9/16"	4"	3,300	ASME B30.26	3972N11	000000


9/16"	8"	3,300	ASME B30.26	3972N12	00000
21/32"	5"	5,200	ASME B30.26	3972N13	00000
21/32"	10"	5,200	ASME B30.26	3972N14	00000
3/4"	5"	6,700	ASME B30.26	3972N15	00000
3/4"	10"	6,700	ASME B30.26	3972N16	00000
15/16"	5"	8,600	ASME B30.26	3972N17	00000
15/16"	10"	8,600	ASME B30.26	3972N18	00000

Flexible Shackles

A flexible, lightweight alternative to steel shackles. Made of polyethylene rope with a nylon cover, they wrap around a variety of anchor points without marring surfaces. To close them, pull the bar through the loop and slide the rubber lock over each end of the bar. Keep these shackles away from sharp edges, which could cause them to break and fail.

Warning: Not for overhead lifting.

	Each







Polyethylene Rope with Nylon Fabric Cover

9/16"	4"	5,500	3968N11	000000


9/16"	8"	5,500	3968N12	00000
21/32"	5"	8,800	3968N13	00000
21/32"	10"	8,800	3968N14	00000
3/4"	5"	11,200	3968N15	00000
3/4"	10"	11,200	3968N16	00000
15/16"	5"	14,300	3968N17	00000
15/16"	10"	14,300	3968N18	00000

Quick-Stop Retracting Fall-Arrest Lanyards with Anchor


Hook Over	Wraparound


Hook-Over Anchor Point 1 Anchor End Connection	Hook-Over Anchor Point, 2 Anchor End Connections	Wraparound Anchor Point, 1 Anchor End Connection

Clip these lanyards onto a rated structure—they form their own anchor. They extend and retract as you move around, but with a sudden jerk, such as a fall, they immediately lock like a seat belt to stop you. They stop your fall within inches, unlike shock-absorbing lanyards that extend several feet. A built-in shock absorber reduces the jolt of the stop. Used together with a harness, they help you meet OSHA and ANSI safety standards.

Class 1—Use Class 1 lanyards when the anchor is at the same level as or above your D-ring.

Hook-Over Anchor Point—Hook-over lanyards have a large snap hook, known as a rebar hook, that attaches directly to a rated structure such as a scaffold or pipe to create an anchor point.

Wraparound Anchor Point—Wraparound lanyards loop around a rated structure such as an I-beam and then attach to themselves to create an anchor point.

1 Anchor End Connection—Lanyards with 1 anchor end connection are best when you’re working in a single location.

2 Anchor End Connections—Lanyards with 2 anchor end connections let you move between anchors while staying tethered. Attach the new anchor point before disconnecting the previous one.

Webbing—Webbing lanyards are flexible and lightweight, so they won't weigh you down.

Anchored Housing—Lanyards with an anchored housing are easier on your back than other retracting lanyards, since the weight of the housing hangs on the anchor rather than your harness’s D-ring.

				Harness End Connection		Anchor End Connection
	Lg., ft.	Material	Construction	Hardware	Material	Hardware	Material	Carabiner Opening Wd.	Snap Hook Opening Size	Housing Material	Wt. Cap., lb.	Specs. Met	Features		Each
Class 1—Hook Over







				1 Anchor End Connection

				6	UHMW Polyethylene	Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	2"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Anchored Housing, Lightweight Aluminum Hardware	8091T111	0000000




						2 Anchor End Connections

						6	UHMW Polyethylene	Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	2"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Anchored Housing, Lightweight Aluminum Hardware	8091T112	000000


						Class 1—Wraparound







										1 Anchor End Connection

										9	UHMW Polyethylene	Webbing	Carabiner with Swivel Eye	Steel	Snap Hook	Steel	2"	3/4"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	—	8091T884	000000

Plastic Loop Clamps

Polyethylene

Compared to metal loop clamps, plastic loop clamps reduce wear on soft materials, such as tubing and cable. Clamps are nonconductive and noncorrosive. They surround lines completely while holding them close to the mounting surface.

Polyethylene—Polyethylene clamps resist moisture and UV rays, making them good for outdoor use.

								Mounting
	ID	For Pipe Size	Ctr.-to-Ctr. Lg.	Lg.	Wd.	Ht.	Thk.	Fasteners Included	Hole Dia.	Temp. Range, ° F	For Use Outdoors	Color	Pkg. Qty.		Pkg.
Polyethylene



		1/4", 6 mm	—	3/8"	3/4"	3/8"	5/16"	1/16"	No	11/64"	-40 to 185	Yes	Black	18	2220T71	00000


		1/4", 6 mm	—	3/8"	3/4"	3/8"	5/16"	1/16"	No	11/64"	-40 to 185	Yes	White	18	2220T75	0000
		3/8", 10 mm	—	1/2"	7/8"	3/8"	7/16"	1/16"	No	11/64"	-40 to 185	Yes	Black	15	2220T72	0000
		3/8", 10 mm	—	1/2"	7/8"	3/8"	7/16"	1/16"	No	11/64"	-40 to 185	Yes	White	15	2220T76	0000
		1/2", 13 mm	1/8	9/16"	1"	3/8"	5/8"	1/16"	No	11/64"	-40 to 185	Yes	Black	12	2220T73	0000
		1/2", 13 mm	1/8	9/16"	1"	3/8"	5/8"	1/16"	No	11/64"	-40 to 185	Yes	White	12	2220T77	0000
		3/4", 19 mm	3/8	5/8"	1 3/8"	1/2"	7/8"	1/16"	No	11/64"	-40 to 185	Yes	Black	6	2220T74	0000
		3/4", 19 mm	3/8	5/8"	1 3/8"	1/2"	7/8"	1/16"	No	11/64"	-40 to 185	Yes	White	6	2220T78	0000
		1", 25 mm	—	13/16"	1 7/16"	1/2"	1 1/16"	1/16"	No	11/64"	-40 to 185	Yes	Black	4	2220T79	0000
		1", 25 mm	—	13/16"	1 7/16"	1/2"	1 1/16"	1/16"	No	11/64"	-40 to 185	Yes	White	4	2220T81	0000

Hammer-In Cable Holders


Style B	Style C	Style D

These insulated staples prevent arc faults.

Style B—Style B attach round cable and phone wire.

Style C—Style C attach flat cable and phone wire.

Style D—Style D are for use with Romex cable.

						For Wire
	Style	Wd.	Ht.	Nail Lg.	For No. of Wires	Max. Ga.	OD	Wd.	Mounting Fasteners Included	For Use Outdoors	Color	Pkg. Qty.		Pkg.
Insulated Staples







				Polyethylene with Galvanized Steel Nail

				B	1/8"	1/4"	23/32"	—	—	5/32"	—	Yes	Yes	Black	100	97905A610	000000


				B	3/16"	5/16"	23/32"	—	—	13/64"	—	Yes	Yes	Black	100	97905A630	0000
				B	1/4"	3/8"	13/16"	—	—	9/32"	—	Yes	Yes	Black	100	97905A640	00000
				B	5/16"	7/16"	7/8"	—	—	5/16"	—	Yes	Yes	Black	100	97905A650	00000
				C	3/16"	3/16"	19/32"	—	—	—	11/64"	Yes	Yes	Black	100	97905A620	0000
				C	5/16"	5/16"	1"	—	—	—	23/64"	Yes	Yes	Black	100	97905A660	0000




						Polyethylene with Zinc-Plated Steel Nail

						D	1/2"	5/16"	1 7/32"	2	10	1/2"	—	Yes	Yes	Off-White	100	98140A140	0000


						D	3/4"	5/16"	1 7/32"	3	10	3/4"	—	Yes	Yes	Off-White	100	98140A180	0000

Hook and Loop Strap Assortments

Straps

Whether you're bundling a couple of cables or a couple dozen, stock up so you always have the size you need. Or, purchase packs of different colors to quickly tell bundles apart.

	Includes	Material	Color		Each
Straps



	40	10 black hook and loop cable ties—6" Lg. × 1/2" Wd. × 0.032" Thick. (for 1 1/2" max. bundle dia., 10 lbs. breaking strength) 10 blue hook and loop cable ties—8" Lg. × 1/2" Wd. × 0.060" Thick. (for 2" max. bundle dia., 40 lbs. breaking strength) 10 orange hook and loop cable ties—11" Lg. × 1/2" Wd. × 0.060" Thick. (for 3" max. bundle dia., 40 lbs. breaking strength) 10 red hook and loop cable ties—8" Lg. × 1/2" Wd. × 0.060" Thick. (for 2" max. bundle dia., 40 lbs. breaking strength)	Nylon Fabric/Polyethylene Fabric	Black, Blue, Orange, Red	6605K35	000000


	50	10 black hook and loop cable ties—6" Lg. × 3/8" Wd. × 0.070" Thick. (for 1 1/4" max. bundle dia., 16 lbs. breaking strength) 10 blue hook and loop cable ties—6" Lg. × 3/8" Wd. × 0.070" Thick. (for 1 1/4" max. bundle dia., 16 lbs. breaking strength) 10 green hook and loop cable ties—6" Lg. × 3/8" Wd. × 0.070" Thick. (for 1 1/4" max. bundle dia., 16 lbs. breaking strength) 10 orange hook and loop cable ties—6" Lg. × 3/8" Wd. × 0.070" Thick. (for 1 1/4" max. bundle dia., 16 lbs. breaking strength) 10 red hook and loop cable ties—6" Lg. × 3/8" Wd. × 0.070" Thick. (for 1 1/4" max. bundle dia., 16 lbs. breaking strength)	Nylon Fabric/Polyethylene Fabric	Black, Blue, Green, Orange, Red	6605K172	00000
	75	5 black hook and loop cable ties—15" Lg. × 3/4" Wd. × 0.070" Thick. (for 4 1/8" max. bundle dia., 16 lbs. breaking strength) 10 black hook and loop cable ties—11" Lg. × 1/2" Wd. × 0.070" Thick. (for 2 7/8" max. bundle dia., 16 lbs. breaking strength) 10 black hook and loop cable ties—13" Lg. × 1/2" Wd. × 0.070" Thick. (for 3 1/2" max. bundle dia., 16 lbs. breaking strength) 10 black hook and loop cable ties—6" Lg. × 1/2" Wd. × 0.038" Thick. (for 1 1/4" max. bundle dia., 10 lbs. breaking strength) 10 black hook and loop cable ties—6" Lg. × 1/2" Wd. × 0.070" Thick. (for 1 1/4" max. bundle dia., 16 lbs. breaking strength) 10 black hook and loop cable ties—6" Lg. × 3/8" Wd. × 0.038" Thick. (for 1 1/4" max. bundle dia., 10 lbs. breaking strength) 10 black hook and loop cable ties—8" Lg. × 1/2" Wd. × 0.038" Thick. (for 1 7/8" max. bundle dia., 10 lbs. breaking strength) 10 black hook and loop cable ties—8" Lg. × 1/2" Wd. × 0.070" Thick. (for 1 7/8" max. bundle dia., 16 lbs. breaking strength)	Nylon Fabric/Polyethylene Fabric	Black	6605K171	00000

Multiline Snap-In Routing Clamps

Style B

Mount with screws once—then snap lines in and out without ever unscrewing a thing. These clamps are often used in labs and data centers, where layouts frequently change. Install them wherever you need to route multiple lines side by side with consistent spacing.

Adhesive Back—Stick these clamps in place, then drill in screws for a more permanent hold.

		ID								Mounting
Style	For No. of Lines	Inch	Metric, mm	For Pipe Size	Lg.	Wd.	Ht.	Material	Mount Type	Fasteners Included	Hole Dia.		Each
B	5	1/2"	13	1/8	4 1/2"	11/16"	13/16"	Polyethylene	Screw On	No	13/64"	2216T15	00000
B	6	1/2"	13	1/8	5 3/8"	1"	15/16"	Polyethylene	Screw On	No	15/64"	2216T18	00000
B	7	3/8"	10	—	4 7/16"	11/16"	5/8"	Polyethylene	Screw On	No	13/64"	2216T14	0000
B	10	1/4"	6	—	4"	5/8"	3/8"	Polyethylene	Screw On/Adhesive Back	No	7/64"	2216T16	0000
B	10	1/4"	6	—	4"	5/8"	3/8"	Polyethylene	Screw On	No	1/8"	2216T13	0000

Extra-Flexible Cut-to-Length Hook and Loop Straps

Bundle small, delicate equipment in tight spaces, such as wire inside cramped electrical enclosures. Snip off the length you need, wrap your bundle, then trim the excess so it doesn't take up extra space. Thinner than standard ones, these straps bend further around tiny bundles for a snug fit that won't slide off.

	Wd.	Choose a Color		Each
Nylon Fabric/Polyethylene Fabric



	15	1/2"	Black	9402T11	00000


	15	3/4"	Black	9402T12	0000
	15	1"	Black	9402T13	00000
	15	1 1/2"	Black	9402T14	00000
	15	2"	Black	9402T15	00000
	15	3"	Black	9402T16	00000
	15	5"	Black	9402T17	00000


	Polyethylene Fabric/Polyester Fabric



			30	1/2"	Black , Blue , Green , Off-White , Orange , Purple , Yellow	9402T1	0000


			30	1"	Black , Blue , Green , Off-White , Orange , Purple , Yellow	9402T2	00000
			30	2"	Black , Blue , Green , Orange , Purple , Yellow	9402T4	00000

Push-to-Close Clamp Pipe Hangers

Lock pipe, tube, and conduit into place in a single step. Press material into the open hanger, then close by hand—no tools or adjustments needed. Mount with a fastener through the unthreaded hole.

HDPE—FDA compliant for direct contact with food. These hangers stand up to chemicals such as strong acids, bases, and solvents without swelling or losing strength. They also keep their shape in washdown environments.

Strut Channel Adapters—Attach to hangers to mount them on strut channel.

Threaded Rod Adapters—Attach to hangers to mount them on threaded rod.

	Pipe Hangers												Strut Channel Adapters			Threaded Rod Adapters
	ID					Mounting Hole
	Inch	Metric, mm	For Pipe Size	For Copper Tube Size	Wt. Cap., lb.	Dia.	Lg.	Wd.	Food Industry Std.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
Strut-Channel/Threaded-Rod/Wall Mount







				HDPE Plastic

				7/16" to 1/2"	12 to 14	1/8, 1/4	1/4, 3/8	80	—	5/16"	3/16"	FDA Compliant 21 CFR 177.1520	10	30075T411	000000	1	30075T29	00000	10	30075T21	00000


				9/16" to 5/8"	15 to 17	1/4, 3/8	3/8, 1/2	90	—	5/16"	3/16"	FDA Compliant 21 CFR 177.1520	10	30075T412	00000	1	30075T29	0000	10	30075T21	0000
				5/8" to 3/4"	17 to 20	3/8	1/2, 5/8	100	—	5/16"	3/16"	FDA Compliant 21 CFR 177.1520	5	30075T413	0000	1	30075T29	0000	10	30075T21	0000
				3/4" to 13/16"	20 to 22	1/2	5/8, 3/4	100	—	5/16"	3/16"	FDA Compliant 21 CFR 177.1520	5	30075T414	0000	1	30075T29	0000	10	30075T21	0000
				13/16" to 7/8"	22 to 23	1/2	3/4	130	—	5/16"	3/16"	FDA Compliant 21 CFR 177.1520	5	30075T415	0000	1	30075T29	0000	10	30075T21	0000
				15/16" to 1 1/16"	25 to 28	3/4	—	130	—	5/16"	3/16"	FDA Compliant 21 CFR 177.1520	5	30075T416	0000	1	30075T29	0000	10	30075T21	0000
				1 1/16" to 1 3/16"	28 to 31	—	1	140	—	5/16"	3/16"	FDA Compliant 21 CFR 177.1520	5	30075T417	00000	1	30075T29	0000	10	30075T21	0000
				1 1/4" to 1 3/8"	32 to 36	1	1 1/4	160	3/8"	—	—	FDA Compliant 21 CFR 177.1520	1	30075T418	0000	1	30075T29	0000	1	30075T24	0000
				1 3/8" to 1 1/2"	36 to 40	1	1 1/4	160	3/8"	—	—	FDA Compliant 21 CFR 177.1520	1	30075T419	0000	1	30075T29	0000	1	30075T24	0000
				1 9/16" to 1 11/16"	40 to 43	1 1/4	1 1/2	180	3/8"	—	—	FDA Compliant 21 CFR 177.1520	1	30075T421	0000	1	30075T29	0000	1	30075T24	0000
				1 13/16" to 2"	47 to 51	1 1/2	—	120	3/8"	—	—	FDA Compliant 21 CFR 177.1520	1	30075T422	0000	1	30075T29	0000	1	30075T24	0000


				2" to 2 3/16"	51 to 56	—	2	190	3/8"	—	—	FDA Compliant 21 CFR 177.1520	1	30075T423	0000	1	30075T29	0000	1	30075T24	0000
				2 5/16" to 2 1/2"	59 to 64	2	2	150	3/8"	—	—	FDA Compliant 21 CFR 177.1520	1	30075T424	0000	1	30075T29	0000	1	30075T24	0000
				2 3/4" to 3 1/8"	71 to 80	2 1/2	3	600	1/2"	—	—	FDA Compliant 21 CFR 177.1520	1	30075T425	0000	1	30075T31	0000	1	30075T25	0000
				3 1/8" to 3 1/2"	80 to 90	3	3	690	1/2"	—	—	FDA Compliant 21 CFR 177.1520	1	30075T426	00000	1	30075T31	0000	1	30075T25	0000
				4 7/16" to 5"	113 to 127	4	—	1,140	1/2"	—	—	FDA Compliant 21 CFR 177.1520	1	30075T427	00000	1	30075T31	0000	1	30075T25	0000