Mount Type Mount Type |
|---|
|
|
Message Type Message Type |
|---|
 | Blank |
 | Accident Prevention |
 | Tracking and Inspection |
System of Measurement System of Measurement |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Visibility Visibility |
|---|
|
Mounting Holes Mounting Holes |
|---|
 | Without Holes |
Maximum Temperature Maximum Temperature |
|---|
|
Specifications Met Specifications Met |
|---|
|
Surface Layer Thickness Surface Layer Thickness |
|---|
|
About Hinges
More
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
About Accident Prevention Signs
More
About Plastic
More
Color-Coding Tear-Off Plastic Write-On Tags
Made of polypropylene, these water- and chemical-resistant tags have perforated green, yellow, and red sections that can be quickly torn off to show when the status of an item or project changes. Write on them with a permanent marker.
| Height | Width | Thickness | Tag Trade Size | Color | Grommet Material | Hole Diameter | Pkg. Qty. | Pkg. | |
| 5 3/4" | 2 7/8" | 0.01" | 7 | Green/Red/Yellow | Metal | 1/4" | 50 | 00000000 | 000000 |
Tag Holder | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Height | Width | Thickness | Tag Trade Size | Color | Grommet Material | Hole Diameter | Material | Length | Pkg. Qty. | Pkg. | |
| 5 3/4" | 2 7/8" | 0.01" | 7 | Green/Red/Yellow | Metal | 1/4" | Steel | 12" | 50 | 00000000 | 000000 |
Metal- and X-Ray Detectable Plastic Write-On Tags
Label devices, machines, and other equipment around your food processing plant while reducing the risk of contaminating the food. These tags contain metal and chemical additives that will set off metal detectors and show up on X-ray machines if they—or any piece of them—fall into your line. They help you comply with Hazard Analysis and Critical Control Point (HACCP) programs for food safety. Available in a variety of colors, they also help you follow Good Manufacturing Practices (GMP)—use one color for each line or area of your plant to reduce the chance of cross contamination. All of these tags are FDA compliant for direct contact with food.
Made of polypropylene, these tags withstand high-temperature washdowns and chemicals used for cleaning. Write on them with markers that are for use in the food industry or laser engrave them. A large hole makes these tags easy to hang.
Key Tags
Write on these tags using a permanent marker to identify and organize keys. They have a spring snap that holds up to three standard-sized keys.
| Ht. | Wd. | Thick. | Material | Color | Hole Dia. | Pkg. Qty. | Pkg. | |
| 1 3/8" | 1 1/8" | 1/16" | Polystyrene Plastic | Red | 1/4" | 20 | 0000000 | 00000 |
| Ht. | Wd. | Thick. | Material | Color | Hole Dia. | Pkg. Qty. | Pkg. | |
| 1 1/4" | 1 1/4" | 1/16" | Polystyrene Plastic | White | 1/4" | 20 | 000000 | 00000 |
Slot | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Thick. | Material | Color | Lg. | Wd. | Pkg. Qty. | Pkg. | |
| 1 1/2" | 1 1/2" | 1/16" | Polystyrene Plastic | White | 3/4" | 3/16" | 20 | 0000000 | 00000 |
Tag Protectors with Laminating Flap
Insert a tag and then seal the laminating flap to protect the tag from moisture and wear.
Flap | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Material | Ht. | Wd. | Thick. | Material | Color | Color | Pkg. Qty. | Pkg. | |
| Polypropylene Plastic | 4 1/2" | 2 3/4" | 0.016" | Plastic | Clear | Clear | 10 | 0000000 | 00000 |
Blank Signs
Fill in the blank with your own custom warnings, labels, and messages. You can write on these signs with markers, add color with paint, or stick on adhesive-back characters. Many even work with printers.
Plain Back
More than twice as thick as our other blank signs, these are a good option for freestanding signs and displays.
Corrugated polypropylene and polystyrene foam signs are durable enough for temporary use outdoors. They're commonly paired with sign stakes. Polystyrene foam is also called foam core. Polystyrene foam signs with a wood-fiber veneer have extra protection from warping and breaking. It's also known as gatorboard.
With Mounting Holes
Secure with fasteners for a permanent hold. Polyethylene signs are for indoor use.
Sign Stakes
Drive these stakes into the ground to display your foam or corrugated signs outside.
Blank Signs | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Pkg. | Sign Stakes | ||||||||||
| Number of Usable Sides | Ht. | Wd. | Thick. | Color | Pkg. Qty. | 1-5 | 6-Up | Pkg. Qty. | Pkg. | ||
Corrugated Polypropylene Plastic | |||||||||||
| 2 | 12" | 18" | 0.157" | White | 1 | 0000000 | 00000 | 00000 | 50 | 0000000 | 000000 |
| 2 | 18" | 24" | 0.157" | White | 1 | 0000000 | 0000 | 0000 | 50 | 0000000 | 00000 |
| 2 | 24" | 24" | 0.157" | White | 1 | 0000000 | 0000 | 0000 | __ | 000000 | 00 |
| 2 | 36" | 24" | 0.157" | White | 1 | 0000000 | 00000 | 0000 | __ | 000000 | 00 |
Polystyrene Foam | |||||||||||
| 2 | 12" | 18" | 0.188" | White | 1 | 0000000 | 0000 | 0000 | 50 | 0000000 | 00000 |
| 2 | 18" | 24" | 0.188" | White | 1 | 0000000 | 0000 | 0000 | 50 | 0000000 | 00000 |
| 2 | 24" | 24" | 0.188" | White | 1 | 0000000 | 0000 | 0000 | __ | 000000 | 00 |
| 2 | 24" | 36" | 0.188" | White | 1 | 0000000 | 00000 | 0000 | __ | 000000 | 00 |
Wood-Fiber-Veneer Polystyrene Foam | |||||||||||
| 2 | 12" | 18" | 0.188" | White | 1 | 0000000 | 0000 | 0000 | 50 | 0000000 | 00000 |
| 2 | 18" | 24" | 0.188" | White | 1 | 0000000 | 00000 | 00000 | 50 | 0000000 | 00000 |
| 2 | 24" | 24" | 0.188" | White | 1 | 0000000 | 00000 | 00000 | __ | 000000 | 00 |
| 2 | 36" | 24" | 0.188" | White | 1 | 0000000 | 00000 | 00000 | __ | 000000 | 00 |
Plastic Color-Contrasting Engraving Signs
Remove the surface layer of these signs to create an engraved message in a contrasting color.
HDPE plates—also known as ColorCore sheets—work with CNC and hand routers. They won’t degrade when exposed to water, humidity, and UV light.
Flange-Mount Blank Signs
Mount these signs perpendicular to the wall to view the same message on each side. Write on them with a permanent marker or use adhesive-back characters (sold separately).
| Mount Type | Ht. | Wd. | Thick. | Flange Wd. | Flange-Mount Sign Style | Material | Color | Each | |
| Adhesive Back | 8" | 6" | 0.04" | 2" | Two-Way View | Polystyrene Plastic | White | 000000 | 00000 |
| Adhesive Back | 8" | 14" | 0.04" | 2" | Two-Way View | Polystyrene Plastic | White | 000000 | 0000 |
| Magnetic Back | 8" | 6" | 0.04" | 2" | Two-Way View | Polystyrene Plastic | White | 000000 | 0000 |
| Magnetic Back | 8" | 14" | 0.04" | 2" | Two-Way View | Polystyrene Plastic | White | 000000 | 0000 |
Write-On Accident Prevention Signs
Write a message in the blank space below the header using a permanent marker or adhesive-back characters (sold separately).
Danger headers are typically used in extreme conditions to indicate an imminently hazardous situation that, if not avoided, will result in death or serious injury. Warning headers indicate a moderately hazardous situation that, if not avoided, may result in death or serious injury. Caution headers indicate a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. Notice headers indicate general instructions for safety.
Signs with a Danger, Warning, or Caution header meet OSHA safety color standards for indicating hazards. Signs with a Notice header are not OSHA regulated.
Mounting | Each | |||||||
|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Thick. | Fasteners Included | Number of Holes | Hole Dia. | 1-5 | 6-Up | |
Danger Header—Blank (English) | ||||||||
With Mounting Holes—Polyethylene Plastic | ||||||||
| 7" | 10" | 0.055" | No | 4 | 3/16" | 0000000 | 000000 | 00000 |
| 10" | 14" | 0.055" | No | 4 | 3/16" | 0000000 | 00000 | 00000 |
| 14" | 20" | 0.055" | No | 4 | 3/16" | 00000000 | 00000 | 00000 |
Warning Header—Blank (English) | ||||||||
With Mounting Holes—Polyethylene Plastic | ||||||||
| 7" | 10" | 0.055" | No | 4 | 3/16" | 00000000 | 00000 | 0000 |
| 10" | 14" | 0.055" | No | 4 | 3/16" | 00000000 | 00000 | 00000 |
| 14" | 20" | 0.055" | No | 4 | 3/16" | 00000000 | 00000 | 00000 |
Caution Header—Blank (English) | ||||||||
With Mounting Holes—Polyethylene Plastic | ||||||||
| 7" | 10" | 0.055" | No | 4 | 3/16" | 0000000 | 00000 | 0000 |
| 10" | 14" | 0.055" | No | 4 | 3/16" | 0000000 | 00000 | 00000 |
| 14" | 20" | 0.055" | No | 4 | 3/16" | 00000000 | 00000 | 00000 |
Notice Header—Blank (English) | ||||||||
With Mounting Holes—Polyethylene Plastic | ||||||||
| 7" | 10" | 0.055" | No | 4 | 3/16" | 0000000 | 00000 | 0000 |
| 10" | 14" | 0.055" | No | 4 | 3/16" | 0000000 | 00000 | 00000 |
| 14" | 20" | 0.055" | No | 4 | 3/16" | 0000000 | 00000 | 00000 |
UV-Resistant Polypropylene Pipe Flanges for Chemicals
- For Use With: Acetic Acid (5%), Calcium Chloride, Hydrochloric Acid (10%), Phosphoric Acid (85%), Salt Water, Sodium Hydroxide, Sulfuric Acid (30%), Water
- Temperature Range: 0° to 150° F
- Pipe Nipples and Pipe: Use Schedule 80 Polypropylene Plastic
- Fittings: Use Schedule 80 Polypropylene Plastic
Use these polypropylene flanges in outdoor environments—they resist the damaging effects of ultraviolet light. Flanges have the chemical resistance to stand up to a wide variety of acids, solvents, and other harsh substances. Also known as Class 150 flanges, they have thick, strong walls for heavy duty chemical processing applications. Bolt two same-size flanges together with a gasket (sold separately) to create an access point within a line. When connecting to pipe, apply a non-hardening, plastic-compatible sealant to the male pipe threads to prevent leaks. Tape or sealants with PTFE are not recommended for plastic-to-plastic threaded connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the flange, then wrench-tighten one to two turns.
Warning: Never use plastic pipe flanges and pipe with compressed air or gas.
Sealants cannot be sold to the listed regions due to local VOC (Volatile Organic Compounds) regulations.
Cap flanges are also known as blind flanges.
| Pipe Size  | Flange OD | For Bolt Dia. | Bolt Hole Dia. | Number of Bolt Holes | Bolt Circle Dia. | Material | Color | Max. Pressure | Each | |
| 2 | 6" | 5/8" | 3/4" | 4 | 4 3/4" | Polypropylene Plastic | Black | 150 psi @ 72° F | 00000000 | 000000 |
| 3 | 7 1/2" | 5/8" | 3/4" | 4 | 6" | Polypropylene Plastic | Black | 150 psi @ 72° F | 00000000 | 00000 |
| 4 | 9" | 5/8" | 3/4" | 8 | 7 1/2" | Polypropylene Plastic | Black | 150 psi @ 72° F | 00000000 | 00000 |
Slippery UHMW Polyethylene Sheets, Bars, and Strips
In addition to having a low-friction surface that prevents sticking and binding, this tough, impact- and wear-resistant material handles the scuffs, scrapes, and strikes that other plastics can’t. These sheets, bars, and strips are often used to make machine guards and chute liners. They are all FDA compliant for direct food contact.
For technical drawings and 3-D models, click on a part number.
- Color: White
- Temperature Range: -40° to 180° F
- Tensile Strength: 4,350-5,800 psi (Poor)
- Impact Strength: 16.8 ft.-lbs./in. (Excellent)
- Hardness: Durometer 65D-67D (Medium)
- For Use Outdoors: No
- Specifications Met: FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.2010, FDA Compliant 21 CFR 178.3297
White | ||||
|---|---|---|---|---|
| Wd. | Lg. | Fabrication | Each | |
1/4" Thick. (0" to 0.015") | ||||
| 2" | 12" | Extruded | 0000000 | 000000 |
| 2" | 24" | Extruded | 0000000 | 00000 |
| 6" | 24" | Extruded | 0000000 | 00000 |
| 12" | 12" | Extruded | 0000000 | 00000 |
3/8" Thick. (0" to 0.015") | ||||
| 2" | 12" | Extruded | 0000000 | 00000 |
| 2" | 24" | Extruded | 0000000 | 00000 |
| 6" | 24" | Extruded | 0000000 | 00000 |
| 12" | 12" | Extruded | 0000000 | 00000 |
1/2" Thick. (0" to 0.015") | ||||
| 2" | 12" | Extruded | 0000000 | 00000 |
| 2" | 24" | Extruded | 0000000 | 00000 |
| 6" | 24" | Extruded | 0000000 | 00000 |
| 12" | 12" | Extruded | 0000000 | 00000 |
3/4" Thick. (0" to 0.015") | ||||
| 2" | 24" | Extruded | 0000000 | 00000 |
| 6" | 24" | Extruded | 0000000 | 00000 |
| 12" | 12" | Extruded | 0000000 | 00000 |
1" Thick. (0" to 0.015") | ||||
| 2" | 24" | Extruded | 0000000 | 00000 |
| 6" | 24" | Extruded | 0000000 | 000000 |
| 12" | 12" | Extruded | 0000000 | 000000 |
1 1/2" Thick. (0" to 0.015") | ||||
| 2" | 24" | Extruded | 0000000 | 00000 |
| 6" | 24" | Extruded | 0000000 | 000000 |
| 12" | 12" | Extruded | 0000000 | 000000 |
2" Thick. (0" to 0.015") | ||||
| 2" | 24" | Extruded | 0000000 | 00000 |
| 6" | 24" | Extruded | 0000000 | 000000 |
| 12" | 12" | Extruded | 0000000 | 000000 |
Plastic Piano Hinges without Holes
Between
Hinge Leaves
Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation. Longer than other hinges, piano hinges run the entire length of doors and lids for strength and durability. All of these hinges are pinless—they have a flexible joint instead of a pin. They also have a standard clearance—when they are closed, the distance between the leaves is about half the width of the flexible joint.
Polyolefin hinges have good resistance to salt water, oil, solvents, and UV rays. It can be used outdoors.
For technical drawings and 3-D models, click on a part number.
| Leaf Thick. | O'all Wd. | Range of Motion | Center Color | Temp. Range, °F | Lengths, ft. | Per Ft. | |
Black Polyolefin Plastic | |||||||
|---|---|---|---|---|---|---|---|
| 0.125" | 1 1/8" | 280° | Black | -40° to 180° | 00000000 | 00000 | |
| 0.125" | 1 1/2" | 280° | Black | -40° to 180° | 00000000 | 0000 | |
| 0.125" | 2" | 280° | Black | -40° to 180° | 00000000 | 0000 | |
| 0.125" | 3" | 280° | Black | -40° to 180° | 00000000 | 0000 | |
Gray Polyolefin Plastic | |||||||
| 0.125" | 1 1/8" | 280° | Gray | -40° to 180° | 00000000 | 0000 | |
| 0.125" | 1 1/2" | 280° | Gray | -40° to 180° | 00000000 | 0000 | |
| 0.125" | 2" | 280° | Gray | -40° to 180° | 00000000 | 0000 | |
| 0.125" | 3" | 280° | Gray | -40° to 180° | 00000000 | 0000 | |
White Polyolefin Plastic | |||||||
| 0.125" | 1 1/8" | 280° | White | -40° to 180° | 00000000 | 0000 | |
| 0.125" | 1 1/2" | 280° | White | -40° to 180° | 00000000 | 0000 | |
| 0.125" | 2" | 280° | White | -40° to 180° | 00000000 | 0000 | |
| 0.125" | 3" | 280° | White | -40° to 180° | 00000000 | 0000 | |
Plastic Hinges without Holes
Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.
Polypropylene hinges have good resistance to salt water, oil, and solvents.
HDPE and PVDF hinges have good corrosion, chemical, and impact resistance. Drill holes for custom mounting.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | Each | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Pin Type | Pin Dia. | Pin Material | Max. Temp., °F | 1-9 | 10-Up | |
Black Polypropylene Plastic | |||||||||||||
| 2 1/2" | 1 1/16" | 2 1/2" | 1 1/16" | 2 1/8" | 0.200" | 180° | Removable | 1/8" | Polypropylene Plastic | 180° | 00000000 | 00000 | 00000 |
Tan Polypropylene Plastic | |||||||||||||
| 2 1/2" | 1 1/16" | 2 1/2" | 1 1/16" | 2 1/8" | 0.200" | 180° | Removable | 1/8" | Polypropylene Plastic | 180° | 00000000 | 0000 | 0000 |
White Polypropylene Plastic | |||||||||||||
| 2 1/2" | 1 1/16" | 2 1/2" | 1 1/16" | 2 1/8" | 0.200" | 180° | Removable | 1/8" | Polypropylene Plastic | 180° | 00000000 | 0000 | 0000 |
White HDPE Plastic | |||||||||||||
| 2 1/2" | 1 1/16" | 2 1/2" | 1 1/16" | 2 1/8" | 0.200" | 180° | Removable | 1/8" | HDPE Plastic | 160° | 00000000 | 0000 | 0000 |