Shape Shape |
---|
![]() | U Channel |
Flexibility Flexibility |
---|
|
|
System of Measurement System of Measurement |
---|
|
Performance Properties Performance Properties |
---|
|
Inside Corner Shape Inside Corner Shape |
---|
|
Specifications Met Specifications Met |
---|
|
Outside Corner Shape Outside Corner Shape |
---|
|
For Use With For Use With |
---|
Fabrication Fabrication |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Hardness Rating Hardness Rating |
---|
|
Clarity Clarity |
---|
![]() |
Opaque |
Friction Rating Friction Rating |
---|
|
Tensile Strength Tensile Strength |
---|
|
More
More
More
Fabricate frames and parts for use in areas where scuffs, scrapes, and strikes are a factor. These UHMW U-channels have a slippery surface and excellent abrasion, wear, and impact resistance.
Outside | Inside | |||||||
---|---|---|---|---|---|---|---|---|
Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Lengths, ft. | Per Ft. | |
1/8" Wall Thick. | ||||||||
3/4" | -0.080" to 0.080" | 1 1/4" | -0.080" to 0.080" | 5/8" | 1" | 0000000 | 00000 | |
1/4" Wall Thick. | ||||||||
3/4" | -0.080" to 0.080" | 1" | -0.080" to 0.080" | 3/8" | 1/2" | 0000000 | 0000 | |
7/8" | -0.080" to 0.080" | 1 1/2" | -0.080" to 0.080" | 1/2" | 1" | 0000000 | 0000 | |
1" | -0.080" to 0.080" | 2" | -0.080" to 0.080" | 5/8" | 1 1/2" | 0000000 | 0000 | |
1" | -0.080" to 0.080" | 2 1/2" | -0.080" to 0.080" | 5/8" | 2" | 0000000 | 0000 | |
1" | -0.080" to 0.080" | 3" | -0.080" to 0.080" | 5/8" | 2 1/2" | 0000000 | 0000 | |
3/8" Wall Thick. | ||||||||
1" | -0.080" to 0.080" | 3" | -0.080" to 0.080" | 5/8" | 2 1/4" | 0000000 | 0000 | |
1 1/4" | -0.080" to 0.080" | 4 1/4" | -0.080" to 0.080" | 7/8" | 3 1/2" | 0000000 | 0000 |
Often used when fabricating guide rails and parts for use in laboratories, these U-channels have a hard, slippery surface that cuts easily without binding. Polypropylene won’t swell when exposed to water and is a good electrical insulator.
Select this plastic trim for its chemical resistance. Often used on panels, boards, signs, and mirrors, it protects edges from impact.
Flexible trim can be bent along a gradual curve. Very flexible trim is flexible enough to bend around tight corners.
Trim with a hard or medium-hard rating withstand high levels of impact. The harder the bumper, the more impact it withstands.
Push-on trim fits onto an edge and it grips on three sides for a tight hold. Trim with an interior adhesive strip offers additional gripping strength.
Adhesive-back trim allows for easy installation.
Push-in stem trim has a barbed stem to fit snugly into grooves or openings that are slightly smaller than the stem thickness.
For technical drawings and 3-D models, click on a part number.
Inside | Outside | Per Ft. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Wd. (A) | Ht. (B) | Wd. (C) | Ht. (D) | Opening Wd. (E) | Flexibility | Hardness Rating | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Available Lengths, ft. | 1-99 | 100-Up | |
Polyethylene Plastic | |||||||||||||||
1 | 1/8" | 7/16" | 1/4" | 1/2" | __ | Flexible | Hard | 30° to 120° | No | Yes | Black | 00000000 | 00000 | 00000 | |
1 | 9/64" | 19/64" | 1/4" | 11/32" | __ | Flexible | Hard | 30° to 120° | No | Yes | Black | 00000000 | 000 | 000 | |
1 | 1/4" | 29/64" | 23/64" | 1/2" | __ | Flexible | Hard | 30° to 120° | No | Yes | Black | 00000000 | 000 | 000 | |
2 | 3/64" | 5/32" | 1/8" | 3/16" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
2 | 1/16" | 5/32" | 1/8" | 3/16" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
2 | 1/16" | 5/32" | 11/64" | 13/64" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
2 | 5/64" | 5/32" | 11/64" | 13/64" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
2 | 3/32" | 11/64" | 15/64" | 7/32" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
2 | 1/8" | 11/64" | 15/64" | 7/32" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
2 | 3/16" | 7/32" | 9/32" | 17/64" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
2 | 1/4" | 15/64" | 3/8" | 9/32" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
3 | 3/64" | 5/32" | 1/8" | 3/16" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
3 | 1/16" | 5/32" | 1/8" | 3/16" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
3 | 1/16" | 5/32" | 11/64" | 13/64" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
3 | 5/64" | 5/32" | 11/64" | 13/64" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
3 | 3/32" | 11/64" | 13/64" | 7/32" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
3 | 1/8" | 11/64" | 13/64" | 7/32" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
3 | 3/16" | 7/32" | 9/32" | 17/64" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
3 | 1/4" | 15/64" | 3/8" | 9/32" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
4 | 1/64"-7/64" | 19/32" | 15/64" | 21/32" | __ | Flexible | Hard | -10° to 170° | No | Yes | Off-White | 00000000 | 000 | 000 | |
Each | |||||||||||||||
4 | 1/32"-3/16" | 1 7/8" | 11/32" | 1 15/16" | __ | Flexible | Hard | -10° to 170° | No | Yes | Off-White | 4 | 00000000 | 000 | 00 |
Per Ft. | |||||||||||||||
1-99 | 100-Up | ||||||||||||||
4 | 1/8"-11/64" | 15/16" | 21/64" | 1" | __ | Flexible | Hard | -10° to 170° | No | Yes | Off-White | 00000000 | 0000 | 0000 | |
7 | __ | 5/64" | 3/16" | 5/32" | 1/16"-5/64" | Flexible | Hard | 30° to 120° | No | Yes | Black | 00000000 | 000 | 000 | |
7 | __ | 5/64" | 7/32" | 5/32" | 5/64"-7/64" | Flexible | Hard | 30° to 120° | No | Yes | Black | 00000000 | 000 | 000 | |
Polyethylene Plastic—with Interior Adhesive Strip | |||||||||||||||
2 | 7/64" | 9/64" | 11/64" | 11/64" | __ | Flexible | __ | 30° to 120° | No | Yes | Black | 0000000 | 000 | 000 | |
2 | 5/32" | 9/64" | 17/64" | 3/16" | __ | Flexible | __ | 30° to 120° | No | Yes | Black | 0000000 | 000 | 000 | |
3 | 7/64" | 9/64" | 11/64" | 11/64" | __ | Flexible | __ | 30° to 120° | No | Yes | Black | 0000000 | 000 | 000 | |
3 | 7/64" | 9/64" | 1/4" | 3/16" | __ | Flexible | Hard | 30° to 120° | No | Yes | Black | 0000000 | 000 | 000 |
Outside | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Style | Wd. (C) | Ht. (D) | Flexibility | Hardness Rating | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Length, ft. | Each | |
Polypropylene Plastic | |||||||||||
9 | 1" | 1/4" | Very Flexible | Hard | Not Rated | No | Yes | Black | 6 | 0000000 | 000000 |
Outside | Stem | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Wd. (C) | Ht. (D) | Lg. | Thick. | Flexibility | Hardness Rating | Temperature Range, °F | For Use Outdoors | Nonmarking | Choose a Color | Available Lengths, ft. | Per Ft. | |
Polyethylene Plastic | |||||||||||||
16 | 1/2" | 5/64" | 1/4" | 3/32" | Flexible | Hard | -10° to 150° | No | Yes | 0000000 | 00000 | ||
16 | 3/4" | 1/16" | 9/32" | 3/32" | Flexible | Hard | -10° to 150° | No | Yes | 0000000 | 000 | ||
16 | 13/16" | 1/16" | 5/16" | 7/64" | Flexible | Hard | -10° to 150° | No | Yes | 0000000 | 000 | ||
16 | 7/8" | 3/64" | 13/32" | 7/64" | Flexible | Hard | -10° to 150° | No | Yes | 0000000 | 000 | ||
16 | 1 1/4" | 5/64" | 11/32" | 1/8" | Flexible | Hard | -10° to 150° | No | Yes | 0000000 | 0000 |
This trim is suitable for use in food preparation and processing environments. It's also chemical resistant. Use it to protect the edges of panels, boards, signs, and mirrors from impact in food processing applications. This trim has a hard rating to withstand high levels of impact. It's also nonmarking.
UHMW trim has better wear resistance than nylon and vinyl trim.
Rigid trim does not bend and is for use on straights. Push-on trim fits onto an edge and it grips on three sides for a tight hold.
Screw-in trim requires drilling mounting holes and securing it with fasteners.
Style 4 can be used outdoors.
For technical drawings and 3-D models, click on a part number.
Inside | Outside | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. (A) | Ht. (B) | Wd. (C) | Ht. (D) | Flexibility | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Specifications Met | Available Lengths, ft. | Per Ft. | |
Short Lengths | ||||||||||||
UHMW Plastic—Hard | ||||||||||||
1/8" | 1/4" | 9/32" | 11/32" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 | |
5/32" | 23/64" | 39/64" | 51/64" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 0000000 | 0000 | |
1/4" | 3/8" | 1/2" | 1/2" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 0000000 | 0000 | |
5/16" | 3/8" | 1/2" | 1/2" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 0000000 | 0000 | |
3/8" | 1/2" | 3/4" | 5/8" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 0000000 | 0000 | |
Each | ||||||||||||
100-ft. Length | ||||||||||||
UHMW Plastic—Hard | ||||||||||||
1/8" | 1/4" | 9/32" | 11/32" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 100 | 00000000 | 000000 |
5/32" | 23/64" | 39/64" | 51/64" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 100 | 00000000 | 000000 |
1/4" | 3/8" | 1/2" | 1/2" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 100 | 00000000 | 000000 |
5/16" | 3/8" | 1/2" | 1/2" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 100 | 00000000 | 000000 |
3/8" | 1/2" | 3/4" | 5/8" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 100 | 00000000 | 000000 |
Inside | Outside | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. (A) | Ht. (B) | Wd. (C) | Ht. (D) | Flexibility | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Specifications Met | Available Lengths, ft. | Per Ft. | |
Short Lengths | ||||||||||||
UHMW Plastic—Hard | ||||||||||||
1/8" | 3/8" | 5/16" | 1/2" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 | |
Each | ||||||||||||
100-ft. Length | ||||||||||||
UHMW Plastic—Hard | ||||||||||||
1/8" | 3/8" | 5/16" | 1/2" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 100 | 00000000 | 000000 |
Inside | Outside | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. (A) | Ht. (B) | Wd. (C) | Ht. (D) | Flexibility | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Specifications Met | Available Lengths, ft. | Per Ft. | |
Short Lengths | ||||||||||||
UHMW Plastic—Hard | ||||||||||||
1" | 39/64" | 1 1/4" | 47/64" | Rigid | -20° to 180° | Yes | Yes | White | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 | |
2 1/2" | 5/8" | 3" | 1" | Rigid | -20° to 180° | Yes | Yes | White | FDA Compliant 21 CFR 177.1520 | 0000000 | 0000 | |
3 1/2" | 7/8" | 4 1/4" | 1 1/4" | Rigid | -20° to 180° | Yes | Yes | White | FDA Compliant 21 CFR 177.1520 | 0000000 | 0000 | |
Each | ||||||||||||
8-ft. Length | ||||||||||||
UHMW Plastic—Hard | ||||||||||||
1" | 39/64" | 1 1/4" | 47/64" | Rigid | -20° to 180° | Yes | Yes | White | FDA Compliant 21 CFR 177.1520 | 8 | 00000000 | 00000 |
2 1/2" | 5/8" | 3" | 1" | Rigid | -20° to 180° | Yes | Yes | White | FDA Compliant 21 CFR 177.1520 | 8 | 00000000 | 00000 |
3 1/2" | 7/8" | 4 1/4" | 1 1/4" | Rigid | -20° to 180° | Yes | Yes | White | FDA Compliant 21 CFR 177.1520 | 8 | 00000000 | 00000 |
Inside | Outside | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. (A) | Ht. (B) | Wd. (C) | Ht. (D) | Flexibility | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Specifications Met | Available Lengths, ft. | Per Ft. | |
Short Lengths | ||||||||||||
UHMW Plastic—Hard | ||||||||||||
13/64" | 3/8" | 17/32" | 3" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 | |
1/4" | 3/8" | 17/32" | 1" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 0000000 | 0000 | |
Each | ||||||||||||
100-ft. Length | ||||||||||||
UHMW Plastic—Hard | ||||||||||||
13/64" | 3/8" | 17/32" | 3" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 100 | 00000000 | 000000 |
1/4" | 3/8" | 17/32" | 1" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 100 | 00000000 | 000000 |
Inside | Outside | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. (A) | Ht. (B) | Wd. (C) | Ht. (D) | Opening Wd. (E) | Flexibility | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Specifications Met | Available Lengths, ft. | Per Ft. | |
Short Lengths | |||||||||||||
UHMW Plastic—Hard | |||||||||||||
1" | 1/4" | 1 1/4" | 1/2" | 5/8" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 | |
1" | 1" | 1 1/4" | 1 1/4" | 1/2" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 0000000 | 0000 | |
1 1/2" | 1/2" | 1 11/16" | 11/16" | 1 3/64" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 0000000 | 0000 | |
2" | 1/4" | 2 3/16" | 13/32" | 1 3/8" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 0000000 | 0000 | |
2" | 1 1/2" | 2 1/4" | 1 3/4" | 1 1/2" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 0000000 | 0000 | |
Each | |||||||||||||
Full Lengths | |||||||||||||
UHMW Plastic—Hard | |||||||||||||
1" | 1/4" | 1 1/4" | 1/2" | 5/8" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 8 | 00000000 | 00000 |
1" | 1" | 1 1/4" | 1 1/4" | 1/2" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 10 | 0000000 | 00000 |
1 1/2" | 1/2" | 1 11/16" | 11/16" | 1 3/64" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 8 | 00000000 | 00000 |
2" | 1/4" | 2 3/16" | 13/32" | 1 3/8" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 8 | 00000000 | 00000 |
2" | 1 1/2" | 2 1/4" | 1 3/4" | 1 1/2" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 8 | 00000000 | 00000 |
Outside | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Inside Wd. (A) | Wd. (C) | Ht. (D) | Opening Wd. (E) | Flexibility | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Specifications Met | Available Lengths, ft. | Per Ft. | |
Short Lengths | ||||||||||||
UHMW Plastic—Hard | ||||||||||||
35/64" | 47/64" | 27/64" | 19/64" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 | |
5/8" | 13/16" | 17/32" | 3/8" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 0000000 | 0000 | |
3/4" | 15/16" | 19/32" | 1/2" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 0000000 | 0000 | |
Each | ||||||||||||
100-ft. Length | ||||||||||||
UHMW Plastic—Hard | ||||||||||||
35/64" | 47/64" | 27/64" | 19/64" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 100 | 00000000 | 000000 |
5/8" | 13/16" | 17/32" | 3/8" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 100 | 00000000 | 000000 |
3/4" | 15/16" | 19/32" | 1/2" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 100 | 00000000 | 000000 |
Outside | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inside Wd. (A) | Wd. (C) | Ht. (D) | Opening Wd. (E) | Wd. of Flat (H) | Flexibility | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Specifications Met | Available Lengths, ft. | Per Ft. | |
Short Lengths | |||||||||||||
UHMW Plastic—Hard | |||||||||||||
3/4" | 1" | 5/8" | 9/16" | 5/8" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 | |
Each | |||||||||||||
100-ft. Length | |||||||||||||
UHMW Plastic—Hard | |||||||||||||
3/4" | 1" | 5/8" | 9/16" | 5/8" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 100 | 00000000 | 000000 |
Inside Wd. (A) | Outside Wd. (C) | Flexibility | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Specifications Met | Available Lengths, ft. | Per Ft. | |
Short Lengths | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
UHMW Plastic—Hard | ||||||||||
3/8" | 19/32" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 | |
1/2" | 11/16" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 0000000 | 0000 | |
Each | ||||||||||
100-ft. Length | ||||||||||
UHMW Plastic—Hard | ||||||||||
3/8" | 19/32" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 100 | 00000000 | 000000 |
1/2" | 11/16" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 100 | 00000000 | 000000 |
Outside | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Wd. (C) | Ht. (D) | Thick. | Flexibility | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Specifications Met | Available Lengths, ft. | Per Ft. | |
Short Lengths | |||||||||||
UHMW Plastic—Hard | |||||||||||
1 1/2" | 1 1/2" | 1/4" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 | |
2" | 2" | 1/4" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 0000000 | 0000 | |
3" | 3" | 1/2" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 | |
Each | |||||||||||
8-ft. Length | |||||||||||
UHMW Plastic—Hard | |||||||||||
1 1/2" | 1 1/2" | 1/4" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 8 | 00000000 | 00000 |
2" | 2" | 1/4" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 8 | 00000000 | 00000 |
3" | 3" | 1/2" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 8 | 00000000 | 00000 |
Outside | Bulb | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. (C) | Ht. (D) | Dia. | Ctr.-to-Ctr. | Flexibility | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Specifications Met | Length, ft. | Per Ft. | |
UHMW Plastic—Hard | ||||||||||||
3 1/4" | 1/4" | 3/4" | 2 1/2" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 5 | 0000000 | 00000 |
Each | ||||||||||||
3 1/4" | 1/4" | 3/4" | 2 1/2" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 10 | 00000000 | 00000 |
With a surface resistivity of 105 ohms, this trim safeguards equipment from static electricity by diverting electrostatic charges quickly. Made of plastic, it's also chemical resistant. Use it to protect the edges of electronics equipment and circuit boards from impact. Push this trim onto an edge and it grips on three sides for a tight hold. All are flexible so it can bend along a gradual curve. This trim has a hard rating to withstand high levels of impact. It's also nonmarking.
For technical drawings and 3-D models, click on a part number.
Inside | Outside | Per Ft. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. (A) | Ht. (B) | Wd. (C) | Ht. (D) | Flexibility | Hardness Rating | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Lg., ft. | 1-99 | 100-Up | |
Polyethylene Plastic | |||||||||||||
1/32" | 3/8" | 3/16" | 1/2" | Flexible | Hard | 30° to 120° | No | Yes | Black | 4 | 00000000 | 00000 | 00000 |
1/16" | 7/32" | 7/32" | 9/32" | Flexible | Hard | 30° to 120° | No | Yes | Black | 4 | 00000000 | 0000 | 0000 |
1/16" | 3/8" | 7/32" | 1/2" | Flexible | Hard | 30° to 120° | No | Yes | Black | 4 | 00000000 | 0000 | 0000 |
5/64" | 29/64" | 3/16" | 1/2" | Flexible | Hard | 30° to 120° | No | Yes | Black | 4 | 00000000 | 0000 | 0000 |
The open top allows these foam U-channels to slide over and cushion an edge. Use them in packaging applications. This polyethylene foam has closed-cell construction, which restricts water, air, and gases from being absorbed.
Minimize friction, reduce noise, and prolong the life of your roller chain. Guides can be cut to the exact length you need.
For technical drawings and 3-D models, click on a part number.
Overall | |||||||
---|---|---|---|---|---|---|---|
For Roller Chain Trade Size | Ht. | Wd. | Material | Max. Temperature, °F | Lengths, ft. | Per Ft. | |
For Single-Strand ANSI Roller Chain | |||||||
40 | 0.31" | 1.25" | Polyethylene Plastic | 175° | 0000000 | 00000 | |
50 | 0.38" | 1.25" | Polyethylene Plastic | 175° | 0000000 | 0000 | |
60 | 0.38" | 1.50" | Polyethylene Plastic | 175° | 0000000 | 0000 | |
80 | 0.50" | 2.00" | Polyethylene Plastic | 175° | 0000000 | 00000 |
These guides align chain more precisely than open-channel guides. Use them to minimize friction, reduce noise, and prolong the life of your roller chain. They can be cut to the exact length you need.
For technical drawings and 3-D models, click on a part number.
Overall | |||||||||
---|---|---|---|---|---|---|---|---|---|
Style | For Roller Chain Trade Size | Ht. | Wd. | Center Channel Wd. | Material | Max. Temperature, °F | Lengths, ft. | Per Ft. | |
For Single-Strand ANSI Roller Chain | |||||||||
A | 40 | 0.31" | 1.00" | 0.25" | Polyethylene Plastic | 175° | 0000000 | 00000 | |
A | 50 | 0.38" | 1.25" | 0.31" | Polyethylene Plastic | 175° | 0000000 | 0000 | |
A | 60 | 0.50" | 1.50" | 0.44" | Polyethylene Plastic | 175° | 0000000 | 00000 | |
A | 80 | 0.50" | 2.00" | 0.56" | Polyethylene Plastic | 175° | 0000000 | 00000 | |
B | 40 | 0.31" | 1.00" | 0.25" | Polyethylene Plastic | 175° | 0000000 | 0000 | |
B | 50 | 0.31" | 1.25" | 0.31" | Polyethylene Plastic | 175° | 00000000 | 00000 | |
B | 60 | 0.31" | 1.25" | 0.44" | Polyethylene Plastic | 175° | 00000000 | 00000 | |
B | 80 | 0.38" | 1.50" | 0.56" | Polyethylene Plastic | 175° | 00000000 | 00000 | |
C | 40 | 0.59" | 0.79" | 0.29" | Polyethylene Plastic | 175° | 00000000 | 00000 | |
C | 50 | 0.59" | 0.79" | 0.35" | Polyethylene Plastic | 175° | 00000000 | 00000 | |
C | 60 | 0.59" | 1.10" | 0.46" | Polyethylene Plastic | 175° | 00000000 | 00000 | |
C | 80 | 0.71" | 1.34" | 0.60" | Polyethylene Plastic | 175° | 00000000 | 00000 |
Also known as captured guides, deep-channel guides prevent chain from slipping off track. Use them to minimize friction, reduce noise, and prolong the life of your roller chain. They can be cut to the exact length you need.
Guides with flanged frame allow easy mounting. Stainless steel frames are more corrosion resistant than steel frames.
For technical drawings and 3-D models, click on a part number.
Overall | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For Roller Chain Trade Size | Ht. | Wd. | Channel Dp. | Material | Mounting Fasteners Included | Mounting Hole Dia. | Max.Temperature, °F | Lengths, ft. | Per Ft. | |
For Single-Strand ANSI Roller Chain | ||||||||||
304 Stainless Steel Frame | ||||||||||
40 | 0.94" | 1.18" | 0.55" | Polyethylene Plastic | __ | __ | 175° | 00000000 | 000000 | |
50 | 0.94" | 1.18" | 0.65" | Polyethylene Plastic | __ | __ | 175° | 00000000 | 00000 | |
60 | 1.13" | 1.18" | 0.82" | Polyethylene Plastic | __ | __ | 175° | 00000000 | 00000 | |
80 | 1.58" | 1.77" | 1.19" | Polyethylene Plastic | __ | __ | 175° | 00000000 | 00000 | |
Steel Flanged Frame | ||||||||||
35 | 0.98" | 2.09" | 0.37" | Polyethylene Plastic | No | 5/16" | 175° | 00000000 | 00000 | |
40 | 0.98" | 2.09" | 0.53" | Polyethylene Plastic | No | 5/16" | 175° | 00000000 | 00000 | |
50 | 0.98" | 2.09" | 0.64" | Polyethylene Plastic | No | 5/16" | 175° | 00000000 | 00000 | |
60 | 0.98" | 2.09" | 0.81" | Polyethylene Plastic | No | 5/16" | 175° | 00000000 | 00000 | |
304 Stainless Steel Flanged Frame | ||||||||||
35 | 0.98" | 2.09" | 0.37" | Polyethylene Plastic | No | 5/16" | 175° | 00000000 | 000000 | |
40 | 0.98" | 2.09" | 0.53" | Polyethylene Plastic | No | 5/16" | 175° | 00000000 | 000000 | |
50 | 0.98" | 2.09" | 0.64" | Polyethylene Plastic | No | 5/16" | 175° | 00000000 | 000000 | |
60 | 0.98" | 2.09" | 0.81" | Polyethylene Plastic | No | 5/16" | 175° | 00000000 | 000000 |