Body Material Body Material |
|---|
|
Material Material |
|---|
|
For Use With For Use With |
|---|
Maximum Pressure Maximum Pressure |
|---|
|
Mounting Orientation Mounting Orientation |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Valve Function Valve Function |
|---|
|
Valve Type Valve Type |
|---|
|
Seal Material Seal Material |
|---|
|
Flow Coefficient (Cv) Flow Coefficient (Cv) |
|---|
|
Tank Circulation Rate Tank Circulation Rate |
|---|
|
About On/Off Valves
More
Tank Mixing Nozzles
Circulate tank contents by pumping liquid through these nozzles. For every gallon of liquid that flows through the inlet, suction draws in and mixes about four gallons from the tank. Nozzles should be positioned close to the bottom of your tank.
| Orifice Dia. | Pipe Size  | Thread Type | Gender | Inlet Flow Rate | Tank Circulation Rate | Dia. | Lg. | Max. Pressure | Max. Temperature, °F | Material | Color | Each | |
| 0.06" | 1/4 | NPT | Male | 0.7 gpm @ 50 psi | 4.4 gpm @ 50 psi | 11/16" | 1 5/8" | 50 psi @ 70° F | 200° | Polypropylene Plastic | Orange | 0000000 | 000000 |
| 0.08" | 1/4 | NPT | Male | 1.2 gpm @ 50 psi | 6 gpm @ 50 psi | 11/16" | 1 5/8" | 50 psi @ 70° F | 200° | Polypropylene Plastic | Green | 0000000 | 00000 |
| 0.1" | 1/4 | NPT | Male | 2 gpm @ 50 psi | 7.8 gpm @ 50 psi | 11/16" | 1 5/8" | 50 psi @ 70° F | 200° | Polypropylene Plastic | Blue | 0000000 | 00000 |
| 0.12" | 1/4 | NPT | Male | 2.9 gpm @ 50 psi | 10.7 gpm @ 50 psi | 11/16" | 1 5/8" | 50 psi @ 70° F | 200° | Polypropylene Plastic | White | 0000000 | 00000 |
| 3/16" | 1/4 | NPT | Male | 7.8 gpm @ 50 psi | 36.8 gpm @ 50 psi | 1 1/4" | 3" | 50 psi @ 70° F | 200° | Polypropylene Plastic | Black | 0000000 | 00000 |
| 5/16" | 3/8 | NPT | Male | 20 gpm @ 50 psi | 100 gpm @ 50 psi | 1 11/16" | 4 1/16" | 50 psi @ 70° F | 200° | Polypropylene Plastic | Black | 0000000 | 00000 |
| 3/8" | 3/4 | NPT | Male | 30 gpm @ 50 psi | 150 gpm @ 50 psi | 3" | 6 3/8" | 50 psi @ 70° F | 200° | Polypropylene Plastic | Black | 0000000 | 00000 |
| 9/16" | 1 1/2 | NPT | Male | 75 gpm @ 50 psi | 375 gpm @ 50 psi | 4 1/2" | 10" | 50 psi @ 70° F | 200° | Polypropylene Plastic | Black | 0000000 | 000000 |
Easy-Clean Threaded Diverting Valves for Chemicals
- Valve Type: Ball
- For Use With: Air, Ammonia, Butane, Carbon Dioxide, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Isopropyl Alcohol, Kerosene, Natural Gas, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hypochlorite, Sulfuric Acid, Toluene, Water
- Ball Material: Polypropylene Plastic
- Seal Material: Fluoroelastomer Rubber
There’s no need to unbolt these valves for cleaning—remove the handle and slide the valve apart for inline access to internal components. Also known as elliptical valves, they have a fluoroelastomer seal and a polypropylene body for diverting flow in chemical-processing applications. All are full port, so they do not restrict flow.
Valves with any port inlet can use any port as an inlet or outlet. Turn the handle to direct flow from the inlet port to one outlet port at full capacity, direct flow to both outlet ports simultaneously at reduced capacity, or shut off flow completely.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Flow Pattern | Max. Pressure | Temp. Range, °F | Vacuum Rating, in. of Hg | End-to-End Lg. | Each | |
Black Polypropylene Plastic Body | |||||||
|---|---|---|---|---|---|---|---|
NPT Female × NPT Female × NPT Female | |||||||
| 1/4 | T-Pattern | 150 psi @ 70° F | 15° to 180° | 29 | 2 1/4" | 00000000 | 000000 |
| 3/8 | T-Pattern | 150 psi @ 70° F | 15° to 180° | 29 | 3" | 00000000 | 00000 |
| 1/2 | T-Pattern | 150 psi @ 70° F | 15° to 180° | 29 | 3" | 00000000 | 00000 |
| 3/4 | T-Pattern | 150 psi @ 70° F | 15° to 180° | 29 | 3 1/2" | 00000000 | 00000 |