Also known as super glue, these adhesives bond quickly.

Accommodate joint movement with these adhesives that remain pliable when cured.

Form bonds in 5 seconds or less.

These adhesives withstand temperatures of 390° F or more.

Form bonds without the strong odor of other instant-bond adhesives.

Use these thick gels, also known as super glue, on vertical surfaces or to fill gaps between parts.

These thick gels fill gaps up to 0.2" wide—the largest of any of our instant-bond adhesives.

Form bonds without the strong odor of other instant-bond adhesives.

These thin liquids, also known as super glue, flow into small gaps.

To invisibly bond transparent plastics, these adhesives won’t turn cloudy.

For flexible bonds that resist cracking, these adhesives stay pliable.

Moisture, humidity, and immersion in water won't degrade the bond of these adhesives.

Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds.

Even when used under water, these adhesives maintain their strength.

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.

These machinable epoxies are mixed with steel, but won’t rust, so they can be used to repair cracks and threaded holes.

These self-extinguishing epoxies meet UL 94 V-0 for flame retardance.

No need to mix these acrylics—apply adhesive to one surface and activator to the other, then bring surfaces together to bond.

Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds.

Solvents, oils, acids, and other chemicals won't degrade the bond of these adhesives.

With high shear strength and peel strength, these form the strongest bonds of our urethane adhesives.

Apply this glue like tape for a no-mess alternative to liquid adhesives, hot melts, and staples. Also known as adhesive transfer tape.

This general purpose glue tackles a variety of repairs.

When heated, these glue sticks melt and quickly begin to harden. Use them to seal packaging and form other low- to medium-strength bonds.

Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to form strong bonds.

For easy positioning, this adhesive remains tacky for hours. Once items are in place, apply pressure to create a permanent bond.

Apply these adhesives on two surfaces, air dry, and then bring together to bond.

Install building materials such as wood and drywall with these general purpose adhesives.

Made from silicone, these sealants are RTV (room-temperature vulcanizing).

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

Press this adhesive-backed plastic tape into place for an immediate light-duty seal.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Impervious to the swelling effects of oil, fuel, and solvents, use these high-strength sealants to assemble and repair fuel systems and tanks.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.

Seal joints and gaps in concrete.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

These sealants don't degrade in sunlight.

Mend rips, tears, and holes on vinyl surfaces, such as awnings and upholstery, with these flexible, waterproof surface fillers.

Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.

Stop slow-flowing and weeping leaks in concrete. Also known as hydraulic cement, these crack fillers begin to harden in three to five minutes to create a permanent fix that won't shrink.

Use these two-part compounds to patch concrete floors, stairs, and walls in cold environments, such as freezers. At room temperature, they cure faster than any of our other concrete patching compounds.

Urethanes withstand a wide range of temperatures and are the best choice for cold-temperature applications. They have excellent flexibility, good chemical and moisture resistance, and provide good electrical insulation.