Cover robot arms and tools with this padding to help prevent injuries in areas where people are working nearby. When the padding is touched, pressure sensors signal your machine to stop moving.

Chemical-Resistant Boots

Protect against chemical spills and splashes as well as other workplace hazards, such as accidental impacts, water, and oil.

Surface Guards and Trim

High-Visibility Corner Guards

Vibrant colors create a visual alert to draw attention to equipment and obstructions. These guards protect corners on walls, posts, shelving, and other surfaces from damage.

Glow-in-the-Dark Corner Guards

Even in the dark, these black and yellow striped guards draw attention to equipment and obstructions. They protect corners on walls, posts, shelving, and other surfaces from damage.

High-Visibility Surface Guards

Vibrant colors create a visual alert to draw attention to equipment and obstructions. These guards protect walls and other flat surfaces from impact.

Surface Guards

Protect walls and other surfaces from impact.

High-Visibility Foam Trim

Black and yellow stripes create a visual alert to draw attention to equipment and obstructions. Designed to cushion during impact, this foam trim protects edges on posts, shelving, and other surfaces from damage.

Glow-in-the-Dark Foam Trim

Even in the dark, this black and yellow striped trim draws attention to equipment and obstructions. Designed to cushion during impact, it protects edges on posts, shelving, and other surfaces from damage.

Pipe and Tubing Guards

Safeguard pipe, tubing, and other round equipment from damage. Black and yellow stripes create a visual alert to draw attention to equipment and obstructions.

Wear-Resistant Surface-Protection Film

Commonly used on stair rails, vehicle panels, and heavy equipment, this durable rubber film is tear resistant. Use it to protect metal, wood, plastic, composite, and painted surfaces from damage.

Bumpers

Angle Bumpers

These bumpers are at a 90° angle to protect corners on equipment, walls, and docks from damage caused by carts, vehicles, and other moving objects. Install them with screws.

Heavy Duty Unthreaded Bumpers

All of these bumpers are reinforced with an embedded washer or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Install them with screws.

Unthreaded Bumpers

Install these bumpers with screws. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces.

Adhesive-Back Bumpers

Press these bumpers into place with the adhesive backing. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. They're comparable to Bumpon bumpers.

Threaded-Stud Bumpers

Twist these bumpers into a threaded hole. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces.

Heavy Duty Threaded-Stud Bumpers

All of these bumpers are reinforced with a steel core for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Twist them into a threaded hole.

Load-Rated Threaded-Stud Bumpers

Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist these bumpers into a threaded hole.

Cut-to-Size Adhesive-Back Bumpers

Make bumpers the size and shape you need. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. Press them into place with the adhesive backing.

Load-Rated Adhesive-Back Bumpers

Select these bumpers for applications that require specific load capacities. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. Press them into place with the adhesive backing. They're comparable to Bumpon bumpers.

Tight-Grip Push-In Bumpers

A ridge on the stem provides a tighter grip than other push-in bumpers. Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Compressible-Stem Push-In Bumpers

The stem on these bumpers compresses to fit into tight holes. Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Load-Rated Threaded Bumpers

Threaded Bumpers

Mount these bumpers on a threaded stud. All are reinforced with a steel core or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines.

Crane Bumpers

Designed to withstand repeated heavy hits on bridge or ceiling cranes, these bumpers protect walls or beams as well as extend crane life.

Highly Compressible Round Bellows with Cuff Ends

Suitable for tight spaces, these highly compressible bellows have sealed seams to keep contaminants out.

Wire, Cable, and Hose Routing & Protecting

Hook-and-Loop Wrap-Around
Sleeving for Universal Robots

Organize and protect the cables on your Universal Robots arm without hindering its movement.

Continuous-Flex Wrap-Around Sleeving

Often used to protect wire, cable, and hose in robotics and other automated applications, this highly flexible sleeving withstands continuous motion without tearing or fraying.

Interference-Shielding Wrap-Around Sleeving

Use this shielded sleeving to protect wire and cable from signal distortion caused by nearby equipment and devices. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.

Drop-Over Interlocking Cable Ramps

These cable ramps handle heavy pedestrian and equipment traffic.

Lay-In Interlocking Cable Ramps

Lay your cable in the slit on the top so it stays off the floor.

Multichannel Interlocking Cable Ramps

Multiple channels let you separate different types of cable and cords.

Frame-Mount Weatherstripping

Mount this weatherstripping to the sides and top of a door frame to seal gaps.

Control of Liquids, Gases, and Solids

Square-Head Expansion Plugs

Turn the square head of the plug into the sealing ring to close off pipe openings.

Floor Drain Plugs

Often used to prevent spills from going down your drain, these plugs resist oil and most chemicals. They are nonabsorbent, washable, and reusable.

Sorbents and Spill Control

Tabletop Spill-Control Dikes

Form a barrier to stop small spills from spreading on tabletops and workstations with these flexible rubber dikes.

Spill-Control Drain Covers

Block grates and manholes to stop liquids from going in, or seal inactive drains to keep odors from leaking out.

Spill-Control Dikes

Create a barrier to stop spills from spreading. Dikes bend to form almost any shape you need. They resist oil, water, and most chemicals, and are nonabsorbent, washable, and reusable.

700 Products

About Durometer Hardness Scales

Protective Equipment