Clear All
Insert Material Insert Material |
|---|
|
Shape Shape |
|---|
 | Rod and Disc |
Rod End Type Rod End Type |
|---|
 |  |
| Ball Joint | Ball Joint Linkage |
Shank Center Length Shank Center Length |
|---|
Shank Thread Direction Shank Thread Direction |
|---|
|
Shank Thread Length Shank Thread Length |
|---|
Cell Type Cell Type |
|---|
 | Open |
Pressure to Compress 25% Pressure to Compress 25% |
|---|
|
Density Density |
|---|
|
Static Radial Load Capacity Static Radial Load Capacity |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Liner Material Liner Material |
|---|
|
About Rod Ends
More
About Foam
More
Internally Threaded Thrust-Rated Ball Joint Rod Ends
An innovative body design keeps the ball from being pushed out when supporting thrust loads. Rod ends are zinc-plated steel for moderate corrosion resistance and have a self-lubricating polyurethane insert.
For technical drawings and 3-D models, click on a part number.
Static Load Cap., lbs. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Radial | Thrust | Temp. Range, °F | Specifications Met | Material | Choose a Shank Thread Direction | Each | |
| 10-32 | 3/16" | 36° | 11/16" | 5/16" | 1 1/8" | 9/16" | 1,900 | 150 | -40° to 175° | __ | Zinc-Plated Carbon Steel | Right Hand | 00000000 | 00000 |
| 1/4"-28 | 1/4" | 36° | 13/16" | 3/8" | 1 3/16" | 9/16" | 2,200 | 660 | -40° to 175° | __ | Zinc-Plated Carbon Steel | Right Hand | 00000000 | 00000 |
| 5/16"-24 | 5/16" | 36° | 15/16" | 1/2" | 1 7/16" | 11/16" | 3,950 | 1,540 | -40° to 175° | __ | Zinc-Plated Carbon Steel | Right Hand | 00000000 | 00000 |
| 3/8"-24 | 3/8" | 28° | 1 1/8" | 9/16" | 1 11/16" | 13/16" | 4,850 | 1,760 | -40° to 175° | __ | Zinc-Plated Carbon Steel | Right Hand | 00000000 | 00000 |
| 1/2"-20 | 1/2" | 30° | 1 1/4" | 5/8" | 2" | 1" | 5,900 | 2,110 | -40° to 175° | __ | Zinc-Plated Carbon Steel | 0000000 | 00000 | |
| 5/8"-18 | 5/8" | 30° | 1 1/2" | 3/4" | 2 1/2" | 1 5/16" | 7,900 | 2,820 | -40° to 175° | __ | Zinc-Plated Carbon Steel | 0000000 | 00000 | |
| 3/4"-16 | 3/4" | 30° | 1 13/16" | 7/8" | 2 7/8" | 1 11/16" | 9,850 | 3,530 | -40° to 175° | __ | Zinc-Plated Carbon Steel | 0000000 | 00000 | |
| M6 × 1 mm | 6mm | 36° | 20mm | 9mm | 30mm | 14mm | 2,200 | 660 | -40° to 175° | DIN 648 | Zinc-Plated Carbon Steel | Right Hand | 00000000 | 00000 |
| M8 × 1.25 mm | 8mm | 36° | 24mm | 12mm | 36mm | 17mm | 3,950 | 1,540 | -40° to 175° | DIN 648 | Zinc-Plated Carbon Steel | 0000000 | 00000 | |
| M10 × 1.5 mm | 10mm | 28° | 28mm | 14mm | 43mm | 21mm | 4,850 | 1,760 | -40° to 175° | DIN 648 | Zinc-Plated Carbon Steel | Right Hand | 00000000 | 00000 |
Thrust-Rated Ball Joint Rod Ends
An innovative body design keeps the ball from being pushed out when supporting thrust loads. Rod ends are zinc-plated steel for moderate corrosion resistance and have a self-lubricating polyurethane insert.
For technical drawings and 3-D models, click on a part number.
Static Load Cap., lbs. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Radial | Thrust | Temp. Range, °F | Specifications Met | Material | Choose a Shank Thread Direction | Each | |
| 1/4"-28 | 1/4" | 36° | 13/16" | 3/8" | 1 7/16" | 13/16" | 2,200 | 660 | -40° to 175° | __ | Zinc-Plated Carbon Steel | Right Hand | 00000000 | 000000 |
| 5/16"-24 | 5/16" | 36° | 15/16" | 1/2" | 1 11/16" | 1" | 3,950 | 1,540 | -40° to 175° | __ | Zinc-Plated Carbon Steel | 0000000 | 00000 | |
| 3/8"-24 | 3/8" | 28° | 1 1/8" | 9/16" | 1 7/8" | 1 1/8" | 4,850 | 1,760 | -40° to 175° | __ | Zinc-Plated Carbon Steel | Right Hand | 00000000 | 00000 |
| 1/2"-20 | 1/2" | 30° | 1 1/4" | 5/8" | 2 7/16" | 1 7/16" | 5,900 | 2,110 | -40° to 175° | __ | Zinc-Plated Carbon Steel | 0000000 | 00000 | |
| 5/8"-18 | 5/8" | 30° | 1 1/2" | 3/4" | 2 5/8" | 1 7/16" | 7,900 | 2,820 | -40° to 175° | __ | Zinc-Plated Carbon Steel | 0000000 | 00000 | |
| 3/4"-16 | 3/4" | 30° | 1 13/16" | 7/8" | 3" | 1 3/4" | 9,850 | 3,530 | -40° to 175° | __ | Zinc-Plated Carbon Steel | 0000000 | 00000 | |
| M6 × 1 mm | 6mm | 36° | 20mm | 9mm | 36mm | 21mm | 2,200 | 660 | -40° to 175° | DIN 648 | Zinc-Plated Carbon Steel | Right Hand | 00000000 | 00000 |
| M6 × 1 mm | 6mm | 36° | 20mm | 9mm | 36mm | 21mm | 2,200 | 660 | -40° to 175° | DIN 648 | Zinc-Plated Carbon Steel | Left Hand | 00000000 | 00000 |
| M8 × 1.25 mm | 8mm | 36° | 24mm | 12mm | 42mm | 25mm | 3,950 | 1,540 | -40° to 175° | DIN 648 | Zinc-Plated Carbon Steel | 0000000 | 00000 | |
| M10 × 1.5 mm | 10mm | 28° | 28mm | 14mm | 48mm | 28mm | 4,850 | 1,760 | -40° to 175° | DIN 648 | Zinc-Plated Carbon Steel | Right Hand | 00000000 | 00000 |
Internally Threaded Inline Ball Joint Linkages
Use these linkages to create inline pivoting connections. The ball-and-socket design allows the ball stud to swivel. All have a liner (also known as a boot) that not only keeps out contaminants, but also acts as a cushion to reduce vibration.
For technical drawings and 3-D models, click on a part number.
Shank | Ball Stud | Right-Hand Threaded Shank | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Center Lg. | Thread Lg. | Thread Size | Center Lg. | Lg. | Max. Ball Swivel | Static Radial Load Cap., lbs. | Material | Ball Stud Thread Direction | Each | |
| 1/4"-28 | 15/16" | 7/16" | 1/4"-28 | 1" | 1/2" | 35° | 15 | Zinc-Plated Carbon Steel | Right Hand | 0000000 | 00000 |
| 5/16"-24 | 1 3/16" | 9/16" | 5/16"-24 | 1 3/16" | 5/8" | 35° | 130 | Zinc-Plated Carbon Steel | Right Hand | 0000000 | 00000 |
| 3/8"-24 | 1 7/16" | 5/8" | 3/8"-24 | 1 3/8" | 13/16" | 35° | 160 | Zinc-Plated Carbon Steel | Right Hand | 0000000 | 00000 |
| M6 × 1 mm | 23.5mm | 11.5mm | M6 × 1 mm | 25mm | 12.5mm | 30° | 15 | Zinc-Plated Carbon Steel | Right Hand | 0000000 | 0000 |
| M8 × 1.25 mm | 29.5mm | 14mm | M8 × 1.25 mm | 30mm | 16.5mm | 30° | 130 | Zinc-Plated Carbon Steel | Right Hand | 0000000 | 00000 |
| M10 × 1.5 mm | 36mm | 15.5mm | M10 × 1.5 mm | 35mm | 20mm | 30° | 160 | Zinc-Plated Carbon Steel | Right Hand | 0000000 | 00000 |
Inline Ball Joint Linkages
Use these linkages to create inline pivoting connections. The ball-and-socket design allows the ball stud to swivel. All have a liner (also known as a boot) that not only keeps out contaminants, but also acts as a cushion to reduce vibration.
For technical drawings and 3-D models, click on a part number.
Shank | Ball Stud | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Center Lg. | Thread Lg. | Thread Size | Center Lg. | Lg. | Max. Ball Swivel | Static Radial Load Cap., lbs. | Material | Ball Stud Thread Direction | Each | |
Right-Hand Threaded Shank | |||||||||||
| 1/4"-28 | 15/16" | 1/2" | 1/4"-28 | 1" | 1/2" | 30° | 15 | Zinc-Plated Carbon Steel | Right Hand | 0000000 | 00000 |
| 5/16"-24 | 1 3/16" | 11/16" | 5/16"-24 | 1 1/4" | 11/16" | 30° | 130 | Zinc-Plated Carbon Steel | Right Hand | 0000000 | 00000 |
| 3/8"-24 | 1 7/16" | 13/16" | 3/8"-24 | 1 9/16" | 13/16" | 30° | 160 | Zinc-Plated Carbon Steel | Right Hand | 0000000 | 00000 |
| M6 × 1 mm | 23.5mm | 12.5mm | M6 × 1 mm | 26.5mm | 12.5mm | 35° | 15 | Zinc-Plated Carbon Steel | Right Hand | 0000000 | 0000 |
| M8 × 1.25 mm | 29.5mm | 16.5mm | M8 × 1.25 mm | 32.5mm | 16.5mm | 35° | 130 | Zinc-Plated Carbon Steel | Right Hand | 0000000 | 00000 |
| M10 × 1.5 mm | 36mm | 20mm | M10 × 1.5 mm | 39mm | 20mm | 35° | 160 | Zinc-Plated Carbon Steel | Right Hand | 0000000 | 00000 |
Super-Cushioning Polyurethane Foam Cords and Circles
Use these flexible polyurethane foam cords and circles to cushion narrow spaces, such as channels and gaps. Foam has open-cell construction, which allows water, air, and gases to be absorbed.
Cords
- Color: Gray
- Temperature Range: -20° to 180° F
- Cell Type: Open
- For Use Outdoors: No
- Density: 1 lbs./cu. ft.
- Pressure to Compress 25%: 0.3 psi (Ultra Soft)
- Tensile Strength Rating: Fair
- Oil-Resistance Rating: Not Rated
Circles
- Color: Gray
- Temperature Range: -20° to 180° F
- Cell Type: Open
- For Use Outdoors: No
- Density: 1 lbs./cu. ft.
- Pressure to Compress 25%: 0.3 psi (Ultra Soft)
- Tensile Strength Rating: Fair
- Oil-Resistance Rating: Not Rated
1/2" Lg. | 1" Lg. | 1 1/2" Lg. | 2" Lg. | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Pkg. Qty. | Pkg. | Pkg. | Pkg. | Pkg. | ||||
| 3" | -0.125" to 0.125" | 10 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 4" | -0.125" to 0.125" | 5 | 0000000 | 0000 | 0000000 | 0000 | 0000000 | 0000 | 0000000 | 0000 |
| 5" | -0.125" to 0.125" | 5 | 0000000 | 0000 | 0000000 | 0000 | 0000000 | 0000 | 0000000 | 00000 |
| 6" | -0.125" to 0.125" | 5 | 0000000 | 0000 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 |
| 8" | -0.125" to 0.125" | 5 | 0000000 | 0000 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 |