System of Measurement System of Measurement |
---|
|
Rivet Type Rivet Type |
---|
![]() | Blind |
Material Material |
---|
|
Head Type Head Type |
---|
![]() | Domed |
For Material Thickness For Material Thickness |
---|
|
Mandrel Material Mandrel Material | Show |
---|
|
For Hole Size For Hole Size |
---|
|
Domed Head Size Domed Head Size |
---|
|
Shear Strength Shear Strength |
---|
|
Tensile Strength Tensile Strength |
---|
|
For Drill Bit Size For Drill Bit Size |
---|
|
More
Copper rivets are electrically conductive, nonmagnetic, and have good corrosion resistance. They join material when you only have access to one side. The low-profile domed head creates a finished appearance.
The combined thickness of material must fall within the rivet's material thickness range. Shear strength is the amount of force it takes to break a rivet from the side, and tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.
A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.
For technical drawings and 3-D models, click on a part number.
For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbs. | Tensile Strength, lbs. | Pkg. Qty. | Pkg. | |
Brass Mandrel | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
1/8" Dia. | ||||||||||
0.063"-0.125" | 0.275" | 0.129"-0.133" | No. 30 | 0.25" | 0.04" | Not Rated | Not Rated | 100 | 000000000 | 000000 |
0.126"-0.187" | 0.337" | 0.129"-0.133" | No. 30 | 0.25" | 0.04" | Not Rated | Not Rated | 100 | 000000000 | 00000 |
0.188"-0.25" | 0.4" | 0.129"-0.133" | No. 30 | 0.25" | 0.04" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
0.251"-0.375" | 0.525" | 0.129"-0.133" | No. 30 | 0.25" | 0.04" | Not Rated | Not Rated | 50 | 000000000 | 00000 |