System of Measurement System of Measurement |
---|
|
Length Length |
---|
Rivet Type Rivet Type | Show |
---|
![]() | Solid |
Rivet Type Rivet Type | Hide |
---|
![]() | ![]() |
Blind | Push In |
![]() | ![]() |
Solid | Pin Drive |
![]() | ![]() |
Hollow | Hex Drive |
![]() | ![]() |
Solid with Washer | Locking Collar |
Head Type Head Type |
---|
![]() | Flush Mount |
Material Material |
---|
|
Head Diameter Head Diameter |
---|
|
|
|
Specifications Met Specifications Met |
---|
|
Head Height Head Height |
---|
|
|
|
Color Color |
---|
![]() | Gold |
Finish Finish |
---|
|
More
Made of heat-treated aluminum, these rivets meet MIL-C-5541. They are lightweight, nonmagnetic, and chemically treated for good corrosion resistance, leaving a gold-colored finish. Install in a countersunk hole and the angled head sits flush with the material's surface.
Installation of solid rivets requires access to both sides of the material as well as a hammer or a solid rivet tool. To achieve the most consistent results and a professional appearance, we recommend using a riveting air hammer with a rivet setter that matches the rivet's head style, and a bucking bar.
For technical drawings and 3-D models, click on a part number.
For Max. Material Thick. | Lg. | Overall Lg. | For Hole Size | For Drill Bit Size | Head Style Number | Head Dia. | Head Ht. | Countersink Angle | Specifications Met | Color | Pkg. Qty. | Pkg. | |
1/16" Dia. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
0.072" | 0.103" | 0.125" | 0.067" | No. 51 | MS20426 | 0.118" | 0.022" | 100° | MIL-C-5541, MS20426AD2-2, NASM20426 | Gold | 250 | 000000000 | 000000 |
0.135" | 0.166" | 0.188" | 0.067" | No. 51 | MS20426 | 0.118" | 0.022" | 100° | MIL-C-5541, MS20426AD2-3, NASM20426 | Gold | 250 | 000000000 | 0000 |
0.197" | 0.228" | 0.25" | 0.067" | No. 51 | MS20426 | 0.118" | 0.022" | 100° | MIL-C-5541, MS20426AD2-4, NASM20426 | Gold | 250 | 000000000 | 00000 |
3/32" Dia. | |||||||||||||
0.105" | 0.152" | 0.188" | 0.098" | No. 40 | MS20426 | 0.183" | 0.036" | 100° | MIL-C-5541, MS20426AD3-3, NASM20426 | Gold | 250 | 000000000 | 0000 |
0.167" | 0.214" | 0.25" | 0.098" | No. 40 | MS20426 | 0.183" | 0.036" | 100° | MIL-C-5541, MS20426AD3-4, NASM20426 | Gold | 250 | 000000000 | 0000 |
0.23" | 0.277" | 0.313" | 0.098" | No. 40 | MS20426 | 0.183" | 0.036" | 100° | MIL-C-5541, MS20426AD3-5, NASM20426 | Gold | 250 | 000000000 | 0000 |
1/8" Dia. | |||||||||||||
0.09" | 0.152" | 0.188" | 0.129" | No. 30 | MS20426 | 0.229" | 0.042" | 100° | MIL-C-5541, MS20426AD4-3, NASM20426 | Gold | 250 | 000000000 | 0000 |
0.146" | 0.208" | 0.25" | 0.129" | No. 30 | MS20426 | 0.229" | 0.042" | 100° | MIL-C-5541, MS20426AD4-4, NASM20426 | Gold | 250 | 000000000 | 00000 |
0.209" | 0.271" | 0.313" | 0.129" | No. 30 | MS20426 | 0.229" | 0.042" | 100° | MIL-C-5541, MS20426AD4-5, NASM20426 | Gold | 250 | 000000000 | 00000 |
0.271" | 0.333" | 0.375" | 0.129" | No. 30 | MS20426 | 0.229" | 0.042" | 100° | MIL-C-5541, MS20426AD4-6, NASM20426 | Gold | 250 | 000000000 | 00000 |
5/32" Dia. | |||||||||||||
0.117" | 0.195" | 0.25" | 0.161" | No. 20 | MS20426 | 0.29" | 0.055" | 100° | MIL-C-5541, MS20426AD5-4, NASM20426 | Gold | 100 | 000000000 | 0000 |
0.18" | 0.258" | 0.313" | 0.161" | No. 20 | MS20426 | 0.29" | 0.055" | 100° | MIL-C-5541, MS20426AD5-5, NASM20426 | Gold | 100 | 000000000 | 0000 |
0.242" | 0.32" | 0.375" | 0.161" | No. 20 | MS20426 | 0.29" | 0.055" | 100° | MIL-C-5541, MS20426AD5-6, NASM20426 | Gold | 100 | 000000000 | 00000 |
3/16" Dia. | |||||||||||||
0.149" | 0.243" | 0.313" | 0.191" | No. 11 | MS20426 | 0.357" | 0.07" | 100° | MIL-C-5541, MS20426AD6-5, NASM20426 | Gold | 100 | 000000000 | 0000 |
0.211" | 0.305" | 0.375" | 0.191" | No. 11 | MS20426 | 0.357" | 0.07" | 100° | MIL-C-5541, MS20426AD6-6, NASM20426 | Gold | 100 | 000000000 | 00000 |
0.336" | 0.43" | 0.5" | 0.191" | No. 11 | MS20426 | 0.357" | 0.07" | 100° | MIL-C-5541, MS20426AD6-8, NASM20426 | Gold | 100 | 000000000 | 00000 |
1/4" Dia. | |||||||||||||
0.03" | 0.155" | 0.25" | 0.257" | F | MS20426 | 0.48" | 0.095" | 100° | MIL-C-5541, MS20426AD8-4, NASM20426 | Gold | 50 | 000000000 | 00000 |
0.155" | 0.28" | 0.375" | 0.257" | F | MS20426 | 0.48" | 0.095" | 100° | MIL-C-5541, MS20426AD8-6, NASM20426 | Gold | 50 | 000000000 | 00000 |
0.28" | 0.405" | 0.5" | 0.257" | F | MS20426 | 0.48" | 0.095" | 100° | MIL-C-5541, MS20426AD8-8, NASM20426 | Gold | 50 | 000000000 | 00000 |
0.405" | 0.53" | 0.625" | 0.257" | F | MS20426 | 0.48" | 0.095" | 100° | MIL-C-5541, MS20426AD8-10, NASM20426 | Gold | 25 | 000000000 | 0000 |
Lightweight and nonmagnetic, these rivets have good corrosion resistance.
Install in a countersunk hole and the angled head sits flush with the material's surface. Installation of solid rivets requires access to both sides of the material as well as a hammer or a solid rivet tool. To achieve the most consistent results and a professional appearance, we recommend using a riveting air hammer with a rivet setter that matches the rivet's head style, and a bucking bar.
For technical drawings and 3-D models, click on a part number.
For Max. Material Thick. | Lg. | Overall Lg. | For Hole Size | For Drill Bit Size | Head Style Number | Head Dia. | Head Ht. | Countersink Angle | Pkg. Qty. | Pkg. | |
1/16" Dia. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
0.126" | 0.157" | 0.188" | 0.067" | No. 51 | AN426 | 0.116" | 0.033" | 78° | 250 | 000000000 | 00000 |
0.438" | 0.469" | 0.5" | 0.067" | No. 51 | AN426 | 0.116" | 0.033" | 78° | 250 | 000000000 | 0000 |
3/32" Dia. | |||||||||||
0.094" | 0.141" | 0.188" | 0.096" | No. 41 | AN426 | 0.177" | 0.051" | 78° | 250 | 000000000 | 0000 |
0.156" | 0.203" | 0.25" | 0.096" | No. 41 | AN426 | 0.177" | 0.051" | 78° | 250 | 000000000 | 0000 |
0.219" | 0.266" | 0.313" | 0.096" | No. 41 | AN426 | 0.177" | 0.051" | 78° | 250 | 000000000 | 0000 |
0.281" | 0.328" | 0.375" | 0.096" | No. 41 | AN426 | 0.177" | 0.051" | 78° | 250 | 000000000 | 0000 |
0.406" | 0.453" | 0.5" | 0.096" | No. 41 | AN426 | 0.177" | 0.051" | 78° | 250 | 000000000 | 0000 |
1/8" Dia. | |||||||||||
0.123" | 0.185" | 0.25" | 0.129" | No. 30 | AN426 | 0.234" | 0.067" | 78° | 250 | 000000000 | 0000 |
0.186" | 0.248" | 0.313" | 0.129" | No. 30 | AN426 | 0.234" | 0.067" | 78° | 250 | 000000000 | 0000 |
0.248" | 0.31" | 0.375" | 0.129" | No. 30 | AN426 | 0.234" | 0.067" | 78° | 250 | 000000000 | 0000 |
0.373" | 0.435" | 0.5" | 0.129" | No. 30 | AN426 | 0.234" | 0.067" | 78° | 250 | 000000000 | 0000 |
0.498" | 0.56" | 0.625" | 0.129" | No. 30 | AN426 | 0.234" | 0.067" | 78° | 250 | 000000000 | 0000 |
0.623" | 0.685" | 0.75" | 0.129" | No. 30 | AN426 | 0.234" | 0.067" | 78° | 250 | 000000000 | 0000 |
0.873" | 0.935" | 1" | 0.129" | No. 30 | AN426 | 0.234" | 0.067" | 78° | 250 | 000000000 | 00000 |
5/32" Dia. | |||||||||||
0.344" | 0.422" | 0.5" | 0.159" | No. 21 | AN426 | 0.293" | 0.084" | 78° | 250 | 000000000 | 0000 |
3/16" Dia. | |||||||||||
0.125" | 0.219" | 0.313" | 0.191" | No. 11 | AN426 | 0.352" | 0.101" | 78° | 250 | 000000000 | 0000 |
0.187" | 0.281" | 0.375" | 0.191" | No. 11 | AN426 | 0.352" | 0.101" | 78° | 250 | 000000000 | 0000 |
0.312" | 0.406" | 0.5" | 0.191" | No. 11 | AN426 | 0.352" | 0.101" | 78° | 100 | 000000000 | 0000 |
0.562" | 0.656" | 0.75" | 0.191" | No. 11 | AN426 | 0.352" | 0.101" | 78° | 100 | 000000000 | 0000 |
0.812" | 0.906" | 1" | 0.191" | No. 11 | AN426 | 0.352" | 0.101" | 78° | 100 | 000000000 | 0000 |
1/4" Dia. | |||||||||||
0.25" | 0.375" | 0.5" | 0.257" | F | AN426 | 0.47" | 0.135" | 78° | 50 | 000000000 | 0000 |
0.375" | 0.5" | 0.625" | 0.257" | F | AN426 | 0.47" | 0.135" | 78° | 50 | 000000000 | 0000 |
0.5" | 0.625" | 0.75" | 0.257" | F | AN426 | 0.47" | 0.135" | 78° | 50 | 000000000 | 0000 |
0.75" | 0.875" | 1" | 0.257" | F | AN426 | 0.47" | 0.135" | 78° | 50 | 000000000 | 0000 |
1" | 1.125" | 1.25" | 0.257" | F | AN426 | 0.47" | 0.135" | 78° | 50 | 000000000 | 0000 |
1.25" | 1.375" | 1.5" | 0.257" | F | AN426 | 0.47" | 0.135" | 78° | 50 | 000000000 | 00000 |
18-8 stainless steel rivets are more corrosion resistant than those made of aluminum, brass, or copper, and they may be mildly magnetic. Install in a countersunk hole and the angled head sits flush with the material's surface.
Installation of solid rivets requires access to both sides of the material as well as a hammer or a solid rivet tool. To achieve the most consistent results and a professional appearance, we recommend using a riveting air hammer with a rivet setter that matches the rivet's head style, and a bucking bar.
For technical drawings and 3-D models, click on a part number.
For Max. Material Thick. | Lg. | Overall Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Countersink Angle | Pkg. Qty. | Pkg. | |
1/8" Dia. | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
0.26" | 0.322" | 0.375" | 0.129" | No. 30 | 0.235" | 0.053" | 90° | 100 | 000000000 | 00000 |
0.385" | 0.447" | 0.5" | 0.129" | No. 30 | 0.235" | 0.053" | 90° | 100 | 000000000 | 0000 |
0.51" | 0.572" | 0.625" | 0.129" | No. 30 | 0.235" | 0.053" | 90° | 100 | 000000000 | 00000 |
0.635" | 0.697" | 0.75" | 0.129" | No. 30 | 0.235" | 0.053" | 90° | 100 | 000000000 | 00000 |
0.885" | 0.947" | 1" | 0.129" | No. 30 | 0.235" | 0.053" | 90° | 50 | 000000000 | 0000 |
3/16" Dia. | ||||||||||
0.202" | 0.296" | 0.375" | 0.191" | No. 11 | 0.351" | 0.079" | 90° | 100 | 000000000 | 00000 |
0.327" | 0.421" | 0.5" | 0.191" | No. 11 | 0.351" | 0.079" | 90° | 50 | 000000000 | 0000 |
0.452" | 0.546" | 0.625" | 0.191" | No. 11 | 0.351" | 0.079" | 90° | 50 | 000000000 | 0000 |
0.577" | 0.671" | 0.75" | 0.191" | No. 11 | 0.351" | 0.079" | 90° | 50 | 000000000 | 00000 |
0.827" | 0.921" | 1" | 0.191" | No. 11 | 0.351" | 0.079" | 90° | 50 | 000000000 | 00000 |
1.077" | 1.171" | 1.25" | 0.191" | No. 11 | 0.351" | 0.079" | 90° | 25 | 000000000 | 0000 |
1/4" Dia. | ||||||||||
0.269" | 0.394" | 0.5" | 0.256" | 6.5 mm | 0.469" | 0.106" | 90° | 50 | 000000000 | 00000 |
0.519" | 0.644" | 0.75" | 0.256" | 6.5 mm | 0.469" | 0.106" | 90° | 25 | 000000000 | 0000 |
Install in a countersunk hole and the angled head sits flush with the material's surface.
Installation of solid rivets requires access to both sides of the material as well as a hammer or a solid rivet tool. To achieve the most consistent results and a professional appearance, we recommend using a riveting air hammer with a rivet setter that matches the rivet's head style, and a bucking bar.
For technical drawings and 3-D models, click on a part number.
For Max. Material Thick. | Lg. | Overall Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Countersink Angle | Pkg. Qty. | Pkg. | |
3/16" Dia. | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
0.202" | 0.296" | 0.375" | 0.191" | No. 11 | 0.351" | 0.079" | 90° | 250 | 000000000 | 00000 |
0.327" | 0.421" | 0.5" | 0.191" | No. 11 | 0.351" | 0.079" | 90° | 200 | 000000000 | 0000 |
0.452" | 0.546" | 0.625" | 0.191" | No. 11 | 0.351" | 0.079" | 90° | 175 | 000000000 | 0000 |
0.577" | 0.671" | 0.75" | 0.191" | No. 11 | 0.351" | 0.079" | 90° | 150 | 000000000 | 0000 |
0.702" | 0.796" | 0.875" | 0.191" | No. 11 | 0.351" | 0.079" | 90° | 125 | 000000000 | 0000 |
0.827" | 0.921" | 1" | 0.191" | No. 11 | 0.351" | 0.079" | 90° | 125 | 000000000 | 0000 |
1.077" | 1.171" | 1.25" | 0.191" | No. 11 | 0.351" | 0.079" | 90° | 100 | 000000000 | 0000 |
1/4" Dia. | ||||||||||
0.269" | 0.394" | 0.5" | 0.257" | F | 0.469" | 0.106" | 90° | 125 | 000000000 | 0000 |
0.394" | 0.519" | 0.625" | 0.257" | F | 0.469" | 0.106" | 90° | 100 | 000000000 | 0000 |
0.519" | 0.644" | 0.75" | 0.257" | F | 0.469" | 0.106" | 90° | 80 | 000000000 | 0000 |
0.769" | 0.894" | 1" | 0.257" | F | 0.469" | 0.106" | 90° | 60 | 000000000 | 0000 |
Brass rivets are electrically conductive and have good corrosion resistance. Install in a countersunk hole and the angled head sits flush with the material's surface.
Installation of solid rivets requires access to both sides of the material as well as a hammer or a solid rivet tool. To achieve the most consistent results and a professional appearance, we recommend using a riveting air hammer with a rivet setter that matches the rivet's head style, and a bucking bar.
For technical drawings and 3-D models, click on a part number.
For Max. Material Thick. | Lg. | Overall Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Countersink Angle | Pkg. Qty. | Pkg. | |
1/8" Dia. | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
0.135" | 0.197" | 0.25" | 0.129" | No. 30 | 0.235" | 0.053" | 90° | 100 | 000000000 | 00000 |
0.26" | 0.322" | 0.375" | 0.129" | No. 30 | 0.235" | 0.053" | 90° | 100 | 000000000 | 0000 |
0.385" | 0.447" | 0.5" | 0.129" | No. 30 | 0.235" | 0.053" | 90° | 100 | 000000000 | 0000 |
0.51" | 0.572" | 0.625" | 0.129" | No. 30 | 0.235" | 0.053" | 90° | 100 | 000000000 | 00000 |
0.885" | 0.947" | 1" | 0.129" | No. 30 | 0.235" | 0.053" | 90° | 50 | 000000000 | 00000 |
3/16" Dia. | ||||||||||
0.202" | 0.296" | 0.375" | 0.191" | No. 11 | 0.351" | 0.079" | 90° | 100 | 000000000 | 00000 |
0.327" | 0.421" | 0.5" | 0.191" | No. 11 | 0.351" | 0.079" | 90° | 100 | 000000000 | 00000 |
0.452" | 0.546" | 0.625" | 0.191" | No. 11 | 0.351" | 0.079" | 90° | 50 | 000000000 | 00000 |
0.577" | 0.671" | 0.75" | 0.191" | No. 11 | 0.351" | 0.079" | 90° | 50 | 000000000 | 00000 |
0.827" | 0.921" | 1" | 0.191" | No. 11 | 0.351" | 0.079" | 90° | 50 | 000000000 | 00000 |
1.077" | 1.171" | 1.25" | 0.191" | No. 11 | 0.351" | 0.079" | 90° | 25 | 000000000 | 0000 |
1.327" | 1.421" | 1.5" | 0.191" | No. 11 | 0.351" | 0.079" | 90° | 25 | 000000000 | 00000 |
1/4" Dia. | ||||||||||
0.519" | 0.644" | 0.75" | 0.257" | F | 0.469" | 0.106" | 90° | 25 | 000000000 | 00000 |
0.769" | 0.894" | 1" | 0.257" | F | 0.469" | 0.106" | 90° | 25 | 000000000 | 00000 |
1.019" | 1.144" | 1.25" | 0.257" | F | 0.469" | 0.106" | 90° | 10 | 000000000 | 0000 |
1.269" | 1.394" | 1.5" | 0.257" | F | 0.469" | 0.106" | 90° | 10 | 000000000 | 0000 |
1.769" | 1.894" | 2" | 0.257" | F | 0.469" | 0.106" | 90° | 10 | 000000000 | 00000 |