Elevate robot arms with these bases so they can reach onto raised surfaces, such as conveyor belts or workstations. Made from steel, these bases are strong and built to last—they’re also machinable and weldable, so you can modify the mounting plates to suit your application. Secure them to the ground or other flat surface using the holes in the bottom plate. These holes are also designed to level the bases—thread fasteners (not included) through each hole and adjust their depth to compensate for uneven floors.

Bases with bolt-on mounts come with mounting holes that match the patterns on commonly used robot arms. For a custom mounting pattern, drill your own holes onto bases with blank mounts.

45° bases tilt your robot arm forward so that it can reach lower than if it were mounted horizontally. These bases help your robot arm reach inside machines or deep boxes, or downward onto a work surface. Mount them to a flat surface, or to the top of another base with a cable routing hole. They include fasteners to attach them to another base, but not to flat surfaces.

Bases with cable routing hole are hollow, so you can feed cables, wires, and tubes through the center column. These bases help keep your cables organized and out of the way.

Attach t-slotted framing kits to square bases as a support for accessories, such as teach pendants, or to build custom cable management systems onto your base.

For technical drawings and 3-D models, click on a part number.

Secure your robot arm to benches, frames, or other surfaces with these base mounts. They’re compatible with the mounting patterns on Universal Robots (UR) arms. Made from aluminum, they’re machinable, so you can drill holes to match them to custom mounting patterns. They also resist corrosion in wet environments.

Attach mounts for T-slotted framing to frames and workstations made from T-slotted framing using brackets, nuts, and fasteners (not included). Bolt them to your robot arm through mounting holes on the face.

Quick-connect mounts have two halves joined by a quick-connect clamp, so you can easily disconnect your robot arm from a base. You’ll need both a robot-base mounting adapter, which connects to your robot, and a robot base mount, which is bolted to a flat surface. Release the clamp to move your robot arm from one base to another, or to switch arms at a workstation. Two locating pins ensure that the arm is accurately aligned with the base, so you don’t need to calibrate after each move. Adapters come with hardware to attach them to your robot arm, but mounts do not include fasteners to attach them to a surface.

For technical drawings and 3-D models, click on a part number.