The head rotates 360° and tilts up and down.

These jacks are often used to position small shop and laboratory equipment.

Multiple joints allow up/down and in/out movement in addition to 360° rotation. These arms are often used to hold exhaust hose in place.

Place these turntables on a bench top to raise an object above the surface for better access to all sides while working.

Often used in displays, these turntables have a motor for continuous rotation.

Adjust the flexible arm to nearly any position.

Adjust the flexible arm to nearly any position.

For more versatility than other low-profile holders, this holder has six locations for mounting indicators and accessories, including two mounting holes and four places to mount an indicator lug back with the included thumb screws.

Adjust the flexible arm to nearly any position.

Attach the C-clamp on this holder to your Bridgeport J head to take indicator measurements without obstructing the cutting tool.

These stands have three plate support points to match the support points on most granite plates.

Rotate the head 360° to use three different vise jaws and lock workpieces in position at 45° intervals.

For large workpieces, these vises open three times as wide as standard tilting-head vises. Tilt and lock the head to position work at an angle.

Designed for outdoor use, these vises have a finish that resists corrosion.

Use these vises for general purpose workholding.

For big jobs, these vises have a wider jaw opening, deeper throat depth, and larger footprint than standard vises.

Place over the jaws and tighten the screws to securely attach liners.

Hold your smallest workpieces in these vises, which have a clamp-on base for quick installation and removal from a benchtop.

Replace worn flat and V jaws.

Also known as woodworkers' vises, these mount to the underside of your workbench and sit flush with the surface.

Clamp tubing into these holders to keep it steady while you cut, flare, or expand the end.

Secure small parts in spring clamps to keep hands free for soldering, gluing, and assembly.

Keep clean rooms free of contaminants. These tripod-mounted vises have rubber-covered jaws that prevent metal-to-metal contact and a plastic-encased chain that seals in lubrication.

The jaws are rubber coated to prevent damage to pipe and other round workpieces.

Hold workpieces steady with these vise jaws—they work with slot-mount workstops so you can quickly position, adjust, and change out your workpieces.

The jaws move inward at the same time to consistently position your workpiece in the center of the vise.

Compressed air controlled by a foot pedal allows hands‐free operation. Use these vises in production applications with frequent insertion and removal of workpieces.

Quickly move parallels in and out of these jaws to raise your workpiece within the vise. Mount jaws to the vise, slide the mating parallels in place, and rest your workpiece on top.

Made from unhardened aluminum or steel, machine these jaws to fit the contours and curves of your workpiece.

Use the adjustment dials to ensure your work is accurately positioned on X and Y axes.

Hardened for wear resistance, these steel jaws are replacements for the ones that come installed on your vise.

Attach these workstops to the side or top of your vise to keep parts in position for machining.

Arrange the included pins in a series of holes to position a part at any angle and hold odd-shaped parts securely.

Keep parts in position for machining by mounting these workstops to your vise jaws.

Turn the handle to move the jaw on these basic vises.

Rotate work 360° and precisely position it on X- and Y-axes by turning the handles.

Precision ground to the tightest parallel tolerance, these steel plates have threaded and unthreaded holes in a grid pattern to support precise positioning and repeatability when machining.

Precisely position work on X- and Y-axes using the handles.

Foldable for transport and storage, use these tables as a sturdy work surface for welding, assembly, cutting, and other tasks around your facility.

With strength for higher load capacities than other ball-grip positioning arms, these arms have a heavy duty construction.

Heavy duty construction adds strength for higher load capacities than other positioning arms.

Stronger and with greater load capacities than gooseneck-style positioning arms, these arms keep their shape even when moving or when exposed to vibration. They’re often used in robotics and conveyor applications when frequent repositioning isn’t required.

Add a mounting surface to an any-which-way positioning arm.

A suction base makes it easy to move and attach these arms to smooth surfaces such as glass and polished metal.

Rollers support and help guide material into machinery.

Rollers support and help guide material into machinery.