Capacity Capacity |
|---|
|
|
For Use With For Use With |
|---|
|
Height Height |
|---|
Diameter Diameter |
|---|
|
|
|
Clarity Clarity |
|---|
|
For Mouth OD For Mouth OD |
|---|
|
Lid Type Lid Type |
|---|
|
Component Component |
|---|
|
Seal Material Seal Material |
|---|
|
Flexible Pour Spouts
Fit this spout directly onto bottles and jugs for controlled pouring.
Spout | ||||||||
|---|---|---|---|---|---|---|---|---|
| Connection Type | For Mouth OD | OD | Lg. | Material | Max. Temperature, °F | Includes | Each | |
| Threaded | 3/4"-1 1/4" | 1/2" | 4" | Rubber | 250° | Cap | 0000000 | 00000 |
Pitchers for Air-Atomizing Sprayers
Fill air-atomizing sprayers with this pitcher. The nozzle is designed to fit into the sprayer opening and has a removable brass filter to strain out foreign particles.
Spout | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap., oz. | Dia. | Ht. | Material | Color | OD | Lg. | Flexibility | Fill Opening Dia. | Graduation Marks | Includes | Each | |
For Use With Water-Based Liquids, Oils and Solvents | ||||||||||||
| 32 | 4 1/2" | 8 1/4" | Polyethylene Plastic | Semi-Clear | 1/2" | 3 1/4" | Rigid | 1 5/8" | 1/4 qt., 1/4 L | Threaded Lid | 0000000 | 000000 |
Design-Your-Own Sealed Dispensers
Choose from a variety of containers, lids, and accessories to design a dispenser that will pour or pump contents without allowing contaminants inside. These dispensers are often used with oil and other lubricating fluids. Not for use with fuels or solvents.
Containers and lids are all interchangeable.
Spout extenders are used with the lids with twist-open spout. They allow controlled pouring in hard-to-reach areas.
Pumps are used with the lids with threaded cap. They dispense approximately 2.8 oz. per stroke. Pumps cannot be used with the 64-oz. container.
Hose kit is used with the heavy duty pump. It allows you to fill the container without removing the lid. You can also use it to attach the container to threaded machinery fill points.
Breather vent screws into the inlet on the heavy duty pump to protect against contaminants.
Reducer nozzle is used with either the standard or heavy duty pump to reduce the hose outlet for controlled dispensing.
| Cap. | Dia. | Ht. | Mouth OD | Graduation Marks | Material | Color | Max. Temp., °F | Each | |
| 64 oz. | 6 5/8" | 8 3/4" | 4 7/8" | 1/4 qt., 0.25 L | Polyethylene Plastic | Semi-Clear | 175° | 0000000 | 000000 |
| 96 oz. | 6 3/4" | 10 1/2" | 4 7/8" | 1/4 qt., 0.25 L | Polyethylene Plastic | Semi-Clear | 175° | 0000000 | 00000 |
| 1 1/4 gal. | 7" | 11" | 4 7/8" | 1/2 qt., 0.5 L | Polyethylene Plastic | Semi-Clear | 175° | 0000000 | 00000 |
| 2 1/2 gal. | 9 3/4" | 13 3/4" | 4 7/8" | 1/2 qt., 0.5 L | Polyethylene Plastic | Semi-Clear | 175° | 0000000 | 00000 |
Lids | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Spout | Replacement Seal Kits | ||||||||||
| Component | For Mouth OD | Opening Dia. | Lg. | Lid Material | Seal Material | Max. Temp., °F | Choose a Lid Color | Each | Each | ||
| Lid with Twist-Open Spout | 4 7/8" | 1/4" | 5" | Polyethylene Plastic | Buna-N Rubber | 175° | 0000000 | 000000 | 0000000 | 00000 | |
| Lid with Twist-Open Spout | 4 7/8" | 1/2" | 8" | Polyethylene Plastic | Buna-N Rubber | 175° | 0000000 | 00000 | 0000000 | 0000 | |
| Lid with Twist-Open Spout | 4 7/8" | 1" | 5" | Polyethylene Plastic | Buna-N Rubber | 175° | 0000000 | 00000 | 0000000 | 0000 | |
Pumps | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Outlet | Inlet | Replacement Seal Kits | |||||||||||||||
| Component | Max. Viscosity, cP | Flow Rate, oz./stroke | Nozzle OD | Hose Lg., ft. | Hose Material | Seal Material | Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | Max. Temp., °F | Each | Each | ||
| Pump | 400 | 2.8 | 1/2" | 5 | PVC Plastic | Buna-N Rubber | 1/4 | NPT | Male | __ | __ | __ | 175° | 0000000 | 000000 | 0000000 | 00000 |
| Heavy Duty Pump | 600 | 2.8 | 1/2" | 5 | PVC Plastic | Viton® Fluoroelastomer Rubber | 1/4 | NPT | Male | 1/4 | NPT | Male | 175° | 0000000 | 000000 | 0000000 | 00000 |
Nozzle | ||||
|---|---|---|---|---|
| OD | Material | Max. Temp., °F | Each | |
| 1/4" | Polyethylene Plastic | 175° | 0000000 | 00000 |
Nozzle | Outlet | Inlet | Hose | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OD | Material | Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | Material | Reinforcement Material | Max. Temp., °F | Each | |
5-ft. Lg. | ||||||||||||
| 1/2" | Aluminum | __ | __ | __ | 1/4 | NPT | Female | PVC Plastic | 304 Stainless Steel | 175° | 0000000 | 000000 |
| __ | __ | 1/4 | NPT | Male | 1/4 | NPT | Female | PVC Plastic | 304 Stainless Steel | 175° | 0000000 | 00000 |
10-ft. Lg. | ||||||||||||
| 1/2" | Aluminum | __ | __ | __ | 1/4 | NPT | Female | PVC Plastic | 304 Stainless Steel | 175° | 0000000 | 00000 |
| __ | __ | 1/4 | NPT | Male | 1/4 | NPT | Female | PVC Plastic | 304 Stainless Steel | 175° | 0000000 | 00000 |
Outlet | Inlet | Hose | 5-ft. Lg. | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Inlet Gender | Material | Reinforcement Material | Removes Particle Size Down To, microns | Max. Temp., °F | Includes | Each | |
| 1/4 | NPT | Male | 1/4 | NPT | Female | PVC Plastic | 304 Stainless Steel | 10 | 175° | 1/4 NPT Male Adapter, Breather Vent | 0000000 | 000000 |
| Removes Particle Size Down To, microns | Max. Temp., °F | Each | |
| 10 | 175° | 0000000 | 000000 |
Rubber Funnels
Twist and mold these flexible funnels for a custom fit. They hold their shape and can be flattened for storage.
Spout | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Top OD | Ht. | OD | Lg. | Material | Color | Autoclavable | Max. Temperature, °F | Each | ||
| A | 4 3/4" | 9" | 1 3/4" | 3 1/2" | Buna-N Rubber-Coated Aluminum | Red | Yes | 425° | 000000 | 000000 |
| A | 6 3/4" | 14 5/8" | 2 1/2" | 5" | Buna-N Rubber-Coated Aluminum | Green | Yes | 425° | 000000 | 00000 |
| A | 8 5/8" | 22" | 3 1/2" | 6 1/2" | Buna-N Rubber-Coated Aluminum | Green | Yes | 425° | 000000 | 00000 |
| B | 5" | 29" | 5" | 29" | Buna-N Rubber-Coated Aluminum | Green | Yes | 425° | 000000 | 00000 |
Pitchers
The open top makes these easier to fill than jugs, while the spout gives more control when pouring.
Styles B and F have a lid to reduce spills.
Style F has a thumb-operated flow-control valve that can be locked in the open position for easy pouring.
Opening | Spout | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity | Dia. | Ht. | Wd. | Dp. | Graduation Marks | Color | Flexibility | OD | Lg. | Max. Temp., °F | Each | |
LDPE Plastic | ||||||||||||
| 32 oz. | 3 1/2" | 10 3/4" | 2 3/4" | 1 3/4" | 1/4 qt., 0.25 L | Semi-Clear | Flexible | 3/8" | 11" | Not Rated | 0000000 | 000000 |
| 64 oz. | 4 1/2" | 12 1/2" | 3 1/4" | 1 3/4" | 1/2 qt., 0.5 L | Semi-Clear | Flexible | 3/8" | 11" | Not Rated | 0000000 | 00000 |
| 1.3 gal. | 6 3/4" | 13 1/2" | 5" | 2 1/2" | 1 qt., 1 L | Semi-Clear | Flexible | 3/8" | 13" | Not Rated | 0000000 | 00000 |
Lid | Spout | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity | Dia. | Ht. | Opening Dia. | Graduation Marks | Color | Type | Material | Flexibility | OD | Lg. | Max. Temp., °F | Each | |
HDPE Plastic | |||||||||||||
| 64 oz. | 5 1/2" | 9 1/2" | 3" | 1/2 qt., 0.5 L | Yellow | Threaded | HDPE Plastic | Flexible | 1" | 7 1/2" | 120° | 0000000 | 000000 |
| 96 oz. | 6 1/2" | 10 1/2" | 3" | 1/2 qt., 0.5 L | Yellow | Threaded | HDPE Plastic | Flexible | 1" | 7 1/2" | 120° | 0000000 | 00000 |
| 1.5 gal. | 8 1/2" | 13" | 3 1/2" | 1 qt., 1 L | Yellow | Threaded | HDPE Plastic | Flexible | 1" | 8 1/2" | 120° | 0000000 | 00000 |
Spout | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity | Wd. | Dp. | Ht. | Opening Dia. | Color | Flexibility | OD | Lg. | Max. Temp., °F | Each | |
HDPE Plastic | |||||||||||
| 3 gal. | 9" | 7" | 17 1/2" | 4" | Black | Rigid | 7/8" | 11" | 150° | 000000 | 000000 |
Opening | Spout | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Capacity | Wd. | Dp. | Ht. | Wd. | Dp. | Flexibility | OD | Lg. | Each | |
Galvanized Steel | ||||||||||
| 3 gal. | 9 1/4" | 16 1/2" | 13" | 6" | 4 1/2" | Rigid | 7/8" | 6" | 000000 | 000000 |
Opening | Lid | Spout | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity | Dia. | Ht. | Wd. | Dp. | Graduation Marks | Color | Type | Material | Flexibility | OD | Lg. | Each | |
Epoxy-Coated Steel | |||||||||||||
| 32 oz. | 5 1/4" | 6" | 3 1/4" | 2 1/2" | 1 qt., 1 L | Black | Loose Fitting | Epoxy-Coated Steel | Flexible | 1/2" | 14" | 0000000 | 000000 |
| 64 oz. | 5 1/4" | 8 1/2" | 3 1/4" | 2 1/2" | 1 qt., 1 L | Black | Loose Fitting | Epoxy-Coated Steel | Flexible | 1/2" | 14" | 0000000 | 00000 |
| 1 gal. | 8 1/4" | 7 1/2" | 5 1/4" | 4 1/2" | 1 qt., 1 L | Black | Loose Fitting | Epoxy-Coated Steel | Flexible | 7/8" | 14" | 0000000 | 00000 |
| 1.3 gal. | 8 1/4" | 8 1/2" | 5 1/4" | 4 1/2" | 1 qt., 1 L | Black | Loose Fitting | Epoxy-Coated Steel | Flexible | 7/8" | 14" | 000000 | 00000 |
| 2 gal. | 8 1/4" | 12 1/4" | 5 1/4" | 4 1/2" | 1 qt., 1 L | Black | Loose Fitting | Epoxy-Coated Steel | Flexible | 7/8" | 14" | 000000 | 00000 |
Plastic Bottles with Pour Spout
Cover the vent hole with your finger to control the pouring speed.
Capacity | Mouth | Lid | Spout | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| oz. | ml | Dia. | Ht. | OD | ID | Color | Type | Material | Color | Flexibility | OD | Lg. | Autoclavable | Max. Temp., °F | Each | |
LDPE Plastic | ||||||||||||||||
| 16 | 475 | 2 3/4" | 9 1/2" | 1 3/8" | 1 1/8" | Semi-Clear | Threaded | HDPE Plastic | Semi-Clear | Rigid | 1/4" | 1 1/2" | No | 180° | 000000 | 000000 |
| 32 | 950 | 3 1/2" | 10 3/4" | 1 3/8" | 1 1/8" | Semi-Clear | Threaded | HDPE Plastic | Semi-Clear | Rigid | 1/4" | 1 1/2" | No | 180° | 000000 | 00000 |
Fuel Cans
Carry and store petroleum-based liquids in these sturdy cans. Color-coding indicates usage: red for gasoline, yellow for diesel, and blue for kerosene.
The spout on Styles A and C automatically closes to prevent spills. Push the button to pour.
Flip the spout on Style B down for pouring and up for storage. Press the trigger to open a vent that allows smooth pouring without spills.
Fuel Cans | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Spout | Replacement Caps | Replacement Spouts | |||||||||||||||
| Style | Cap., gal. | Lg. | Wd. | Ht. | Fill Opening Dia. | Lg. | OD | Flexibility | Graduation Marks | Specifications Met | Color | Each | Each | Each | |||
For Gasoline | |||||||||||||||||
Polyethylene Plastic | |||||||||||||||||
| A | 1 | 8 1/8" | 5 7/8" | 8" | 1 5/8" | 5" | 1 3/8" | Rigid | __ | CARB Compliant, EPA 40 CFR Part 59 | Red | 0000000 | 000000 | 000000 | 00 | 0000000 | 00000 |
| A | 2 | 9 7/8" | 7 1/8" | 10" | 1 5/8" | 5" | 1 3/8" | Rigid | __ | CARB Compliant, EPA 40 CFR Part 59 | Red | 0000000 | 00000 | 000000 | 00 | 0000000 | 0000 |
| A | 5 | 14 3/4" | 10 1/8" | 15 3/8" | 1 5/8" | 5" | 1 3/8" | Rigid | __ | CARB Compliant, EPA 40 CFR Part 59 | Red | 0000000 | 00000 | 000000 | 00 | 0000000 | 0000 |
| B | 2 | 13" | 9" | 12" | 1 5/8" | 9" | 3/4" | Flexible | 1 gal. / 4 L | C-UL Listed, CARB Compliant, D.O.T. Approved, EPA 40 CFR Part 59 | Red | 0000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
| B | 5 | 15 1/4" | 10 1/4" | 15 1/2" | 1 5/8" | 9" | 3/4" | Flexible | 1 gal. / 4 L | C-UL Listed, CARB Compliant, D.O.T. Approved, EPA 40 CFR Part 59 | Red | 0000000 | 00000 | 0000000 | 0000 | 000000 | 00 |
Painted Steel | |||||||||||||||||
| C | 5 | 13 1/2" | 6 1/2" | 18 1/2" | 1 1/2" | 12" | 1" | Rigid | __ | CARB Compliant, DOT Approved, EPA 40 CFR Part 59 | Red | 0000000 | 00000 | 000000 | 00 | 0000000 | 00000 |
For Diesel | |||||||||||||||||
Polyethylene Plastic | |||||||||||||||||
| A | 5 | 14 3/4" | 10 1/8" | 15 3/8" | 1 5/8" | 5" | 1 3/8" | Rigid | __ | CARB Compliant, EPA 40 CFR Part 59 | Yellow | 0000000 | 00000 | 000000 | 00 | 0000000 | 0000 |
| B | 5 | 15 1/4" | 10 1/4" | 15 1/2" | 1 5/8" | 9" | 3/4" | Flexible | 1 gal. / 4 L | C-UL Listed, CARB Compliant, D.O.T. Approved, EPA 40 CFR Part 59 | Yellow | 0000000 | 00000 | 0000000 | 0000 | 000000 | 00 |
For Kerosene | |||||||||||||||||
Polyethylene Plastic | |||||||||||||||||
| A | 5 | 14 3/4" | 10 1/8" | 15 3/8" | 1 5/8" | 5" | 1 3/8" | Rigid | __ | CARB Compliant, EPA 40 CFR Part 59 | Blue | 0000000 | 00000 | 000000 | 00 | 0000000 | 0000 |
| B | 5 | 15 1/4" | 10 1/4" | 15 1/2" | 1 5/8" | 9" | 3/4" | Flexible | 1 gal. / 4 L | C-UL Listed, CARB Compliant, D.O.T. Approved, EPA 40 CFR Part 59 | Blue | 0000000 | 00000 | 0000000 | 0000 | 000000 | 00 |
Safety Cans with Built-In Spout
Also known as Type II safety cans, these have two openings—one for filling, one for pouring. Safety cans are a safer choice than fuel cans for storing flammable liquids. They have a spring-loaded, self-closing lid; pressure-relief cap; flame arrester; and a vacuum-release valve for controlled pouring.
Color-coding typically indicates usage: red for gasoline, yellow for diesel, blue for kerosene, and green for other liquids.
Style B have a steel roll bar that protects the spout, handle, and trigger during transport.
Cans | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Spout | Replacement Spouts | ||||||||||||
| Style | Cap., gal. | Dia. | Ht. | Fill Opening Dia. | Lg. | OD | Flexibility | Specifications Met | Choose a Color | Each | Each | ||
Steel—Powder-Coated Finish Steel | |||||||||||||
| A | 1 | 9 1/2" | 10 1/2" | 1 1/2" | 9" | 5/8" | Flexible | C-UL Listed, UL Listed | 0000000 | 0000000 | 0000000 | 000000 | |
| A | 2 1/2 | 11 1/2" | 12" | 1 1/2" | 9" | 5/8" | Flexible | C-UL Listed, UL Listed | 0000000 | 000000 | 0000000 | 00000 | |
| A | 5 | 11 1/2" | 17 3/4" | 1 1/2" | 9" | 1" | Flexible | C-UL Listed, UL Listed | 0000000 | 000000 | 0000000 | 00000 | |
| B | 2 1/2 | 11 3/4" | 12" | 1 1/2" | 9" | 5/8" | Flexible | D.O.T. Approved, FM Approved | Red | 0000000 | 000000 | 0000000 | 00000 |
| B | 5 | 11 3/4" | 17 1/2" | 1 1/2" | 9" | 1" | Flexible | D.O.T. Approved, FM Approved | Red | 0000000 | 000000 | 0000000 | 00000 |
Safety Cans
Also known as Type I safety cans, these have a single opening for both filling and pouring. Safety cans are a safer choice than fuel cans for storing flammable liquids. They have a spring-loaded, self-closing lid; pressure-relief cap; and a flame arrester.
Powder-coated steel cans are for petroleum-based liquids. Color-coding typically indicates usage: red for gasoline, yellow for diesel, blue for kerosene, and green for other liquids.
Safety Cans | Rigid Plastic Pour Spouts | Flexible Steel Pour Spouts | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Cap. | Dia. | Ht. | Fill Opening Dia. | Specifications Met | Choose a Color | Each | Each | Each | |||
| C | 1 gal. | 9 1/2" | 11" | 1 5/8" | C-UL Listed, FM Approved, NFPA Code 30, OSHA Standards, UL Listed | 000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 | |
| C | 2 gal. | 9 1/2" | 13 3/4" | 1 5/8" | C-UL Listed, FM Approved, NFPA Code 30, OSHA Standards, UL Listed | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | |
| C | 2 1/2 gal. | 11 3/4" | 11 1/2" | 1 5/8" | C-UL Listed, FM Approved, NFPA Code 30, OSHA Standards, UL Listed | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | |
| C | 5 gal. | 11 3/4" | 17" | 1 5/8" | C-UL Listed, FM Approved, NFPA Code 30, OSHA Standards, UL Listed | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | |
Drinking Fountain Nozzles
Nozzles meet NSF/ANSI standards for use with drinking water.
Style C and D have a flexible plastic mouth guard to protect against injuries.
Style C helps you comply with ADA when properly installed.
Nozzles | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inlet | Replacement Flow Regulators | |||||||||||||
| Style | Pipe Size | Thread Type | Gender | Dia. | Connection Shank Lg. | Mouth Guard Color | Mouth Guard Material | Specifications Met | Features | Includes | Each | Each | ||
Chrome-Plated Brass | ||||||||||||||
| A | 3/8 | NPS | Female | 1 3/4" | __ | __ | Chrome-Plated Brass | NSF/ANSI 61 | Push-Button Valve with Flow Regulator | __ | 0000000 | 000000 | 00000000 | 000000 |
| B | 3/8 | NPS | Male | 1 3/4" | 4" | __ | Chrome-Plated Brass | NSF/ANSI 61 | Push-Button Valve with Flow Regulator | __ | 0000000 | 00000 | 00000000 | 00000 |
| C | 1/2 | NPS | Male | 2" | 2" | Beige | Plastic | NSF/ANSI 61 | Push-Button Valve with Flow Regulator | __ | 00000000 | 000000 | 00000000 | 00000 |
Chrome-Plated Plastic | ||||||||||||||
| D | 3/8 | NPS | Male | 1 5/8" | __ | Beige | Plastic | NSF/ANSI 61 | __ | 5" Copper Water Supply Tube | 00000000 | 00000 | 000000 | 00 |