These cords contain a single pair of twisted wires, making them lighter and more flexible than other Ethernet cords. They’re good for transportation, robotics, and automation applications. Cords have a metal locking tab to create a more secure connection than cords with RJ45 connectors, and are easier to install than coaxial cords and cords with M12 connectors. They transmit power as well as data, making them useful in places without an easily accessible power supply. These cords are shielded to block out signal interference from nearby devices.

Cords meet IEEE standards for data transmission speeds and protocols. All meet EN 60811-404 for resistance to mineral oil. They’re compliant with IEC 60332-1-2 for flame retardancy and IEC 63171-6 for single pair Ethernet cord dimensions and compatibility.

For technical drawings and 3-D models, click on a part number.

Also known as primary wire, this wire meets SAE standards for low-voltage wiring in trucks, boats, trailers, and other vehicles.

With cross-linked polyethylene insulation, TXL and GXL wire withstands higher temperatures and resists abrasion better than GPT wire. TXL wire has thin walls, so it’s lightweight. It’s often used in dashboards and other interior jobs. GXL wire has thick walls, making it suitable for engine compartments.

Connect batteries in vehicles and generators.

Strand count is the number of strands followed by the size of the individual strand.

Wire with a PVC plastic insulation resists fuel and oil.

SAE J1128 and SAE J1127 wire meet standards for low-voltage wiring in vehicle electrical systems.

Because they tightly thread to M12 connections, these connectors won’t let contaminants in or come loose from vibration in rugged industrial environments and automated systems as they send power and signal or just power to your equipment. Their poles and keyways adhere to standard coding layouts, reducing the chance you’ll mismatch connectors.

A- and C-coded connectors send both power and signal, while K-, L-, S-, and T-coded connectors only send power. Choose A-coded connectors for AC and DC sensors, actuators, motors, light curtains, and other devices. They’re often used to connect equipment to IO Link controllers and within Profibus, DeviceNet, and other fieldbus systems. T-coded connectors work with DC devices and are often used on passive distribution boxes and to power IO Link modules.

Receptacles thread into panels and walls, making them best for stationary or permanent installations such as control panels. 90° elbow connectors run your cord along the side of equipment, so they fit behind machines and in tight spaces.

Connectors with screw terminals hold wire by tightening a screw.

When mated, all connectors are IP rated to seal out dust. IP67 and IP68 rated connectors can withstand brief submersion. NEMA 12 rated connectors can also be splashed with water, oil, and coolant.

Add caps to protect connectors and maintain their IP and NEMA ratings when not in use.

Note: Sockets and female receptacles may have extra holes on their face that are not used.

For technical drawings and 3-D models, click on a part number.

Block signal interference from nearby devices, such as motors and transmitters, while maintaining a strong, stable connection for M12 threads. The shielding on these connectors maintains signal integrity and minimizes signal loss between equipment. The threaded housing creates a secure connection that withstands the shaking and vibrating of industrial automation.

A-coded, these connectors are often used to connect equipment to IO Link controllers and devices within Profibus, DeviceNet, and other fieldbus systems. They work with both AC and DC devices such as sensors, motors, and light curtains. Poles and keyways on their face adhere to standard coding layouts to reduce the chance you’ll mismatch connections.

All meet IP ratings when either mated or capped. IP67 rated connectors are protected from dust and temporary submersion.

Add caps to protect connectors and maintain their IP ratings when not in use.

Note: They may have extra holes on the face that are not used.

For technical drawings and 3-D models, click on a part number.

Also known as pico connectors, these are for low-current devices such as 8 mm and smaller proximity switches and photoelectric switches.

Sockets and female receptacles may have extra holes on the face that are not used.

IP67 rated connectors protect against dust and temporary submersion.

For technical drawings and 3-D models, click on a part number.