These receptacles are for light-duty use.

Built to handle tough, repetitive-use applications, these are more durable than standard straight-blade connectors.

A good fit for tight spaces, these are smaller than standard straight-blade plugs. Also known as NEMA midget plugs.

Install these receptacles indoors. They keep personnel safe from electric shock by adding ground fault protection.

Protect computers and other sensitive equipment from electromagnetic interference (EMI). Also known as isolated ground receptacles.

Access the wire connection by opening the hinged housing. These connectors have screw terminals to create a secure connection; wire must be stripped before winding around the screw terminal.

Minimize the risk of electric shock and electrical fires with a single receptacle.

Prevent damage to electronic equipment caused by spikes in voltage.

Visually confirm that connectors have power; they have an indicating light that is visible from any angle.

Add a fuse to protect equipment from current overload.

When mated, connectors meet NEMA 6P, NEMA 12, and either IP67 or IP69K.

Visually confirm that sockets have power—the face lights up when they're connected. The rubber housing protects them from damage caused by drops and other impact.

Use connectors where ignitable gas and dust may be present. They are UL listed for Class I, Division 1 and 2, Groups C and D; Class II, Division 1 and 2, Groups F and G; and Class III hazardous environments.

An indicating light that is visible from any angle lets you know when these plugs have power. They have an extra-tight fit when mated with a receptacle to withstand high vibration. Also known as hospital grade plugs.

Eliminate the need for wire stripping; snap-on terminals pierce the wire insulation. When mated with a receptacle, these plugs have an extra-tight fit to withstand high vibration. Also known as hospital grade plugs.

Attach these general purpose receptacles to DIN rail to bring power closer to where you need it.

Send power to your device using the inlet, then route power to another device through the outlet—all with standard IEC power cords.

Use these general purpose connectors indoors in high vibration applications. A quarter turn locks them together when mated to remain secure in high-vibration applications.

Also known as twist-lock devices, these connectors withstand tough, repetitive use, and are more durable than standard turn-lock connectors. They turn to lock together when mated to prevent accidental disconnection.

A good fit for tight spaces, these connectors are also known as NEMA midget plugs. They turn to lock together when mated to prevent accidental disconnection.

For use with washdown receptacles, these outlet boxes withstand corrosive and washdown environments.

Stainless steel hardware and nickel-plated blades or slots protect connections from damage in corrosive environments. These connectors turn to lock together when mated to prevent accidental disconnection.

A rubber housing protects these connectors from damage caused by drops and impact. They turn to lock together when mated to prevent accidental disconnection.

Power small devices, such as chargers for electronics, from a vehicle. Also known as cigarette-lighter plugs and sockets.

These connectors meet international standards IEC 309-1 and 309-2. They prevent an electrical arc when separating mated connectors, so you can safely connect and disconnect with the power on.

Caps are watertight to protect hazardous location safe-break plugs when not in use.

Caps are watertight to protect safe-break plugs when not in use.

These connectors have the same pin and socket configuration as connectors that meet MIL-DTL-26482, so they can be used with products that meet the same standard. Quickly mate them by pushing them together.

Protect Mil. Spec. connectors when not in use.

Made with industry standard barrel-style ends, these connectors carry DC power between electronic devices and power supplies.

Install these connectors in panels, enclosures, and bulkheads to join equipment with compatible Deutsch-style DC connectors.

Quickly replace or add connectors to an existing wiring system—connectors come assembled with wire leads already installed. Also known as weather-pack connectors, they withstand moisture, harsh engine fluids, and high temperatures.

Send higher current than M5, M8, and M12 connectors near tough industrial jobs, such as welding and metal machining.

Often used to send power and signal to automated systems, motors, and pumps, these mini connectors carry higher currents than M5, M8, and M12 connectors.

Simplify wiring and reduce the number of cords in your automation setup.

Protect mini connectors when not in use.

Assemble a connector that can handle multiple applications at once. Combine inserts that send power, signal, and data with a base and a hood.

Build a connector that fits in tight spaces by combining male and female inserts for power and signal with a compact base and a hood.

Carry up to four times the current of standard Compact Latching Connectors. The base and hood latch together securely, yet can be quickly detached for equipment repair or replacement.

A rubber seal and stainless steel hardware give these connectors excellent chemical resistance. They're rated NEMA 12, 4X, and IP65 for protection against corrosion, oil, and washdown environments.

Safely use these connectors with 12 mm proximity switches, console lights, valves, and power supplies in food, beverage, and pharmaceutical applications—they’re FDA compliant for direct food contact.

Quickly mate these connectors by pushing them together. They're often used with 12 mm proximity switches and valves in automated systems.

Block signal interference from nearby devices, such as motors and transmitters, while maintaining a strong, stable connection for M12 threads.

Because they tightly thread to M12 connections, these connectors won’t let contaminants in or come loose from vibration in rugged industrial environments and automated systems as they send power and signal or just power to your equipment.

To save space and reduce the number of cords in industrial automation setups, these splitters join two devices with M12 connectors to a single cord, distribution block, or I/O module with M12 connectors.

Rated IP69K, these M16 connectors protect against dust, debris, and hot, high-pressure jets of water at high volumes.

Connect different pole configurations to join sensors, switches, and other devices to cords, distribution blocks, and I/O modules.

A TPE cable protects these connectors from oil, weld slag, and other tough industrial stresses as they send signal and power to low-current devices with M8 connections.

Also known as pico connectors, these connectors are often used with 8 mm and smaller proximity switches and photoelectric switches.

A current rating up to 400 amps makes these connectors suitable for use in industrial machinery and floodlights.