Thread Size Thread Size |
|---|
Flange Material Flange Material |
|---|
|
Flange Thread Size Flange Thread Size |
|---|
|
|
Flange Diameter Flange Diameter |
|---|
|
|
|
Bolt Circle Diameter Bolt Circle Diameter |
|---|
|
|
|
Travel Distance per Turn Travel Distance per Turn |
|---|
Flange Thickness Flange Thickness |
|---|
|
|
|
Mounting Hole Diameter Mounting Hole Diameter |
|---|
|
|
|
Diameter Diameter |
|---|
|
|
|
Flange Hardness Flange Hardness |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Thread Type Thread Type |
|---|
|
Selecting Compatible Lead Screws and Nuts
More
Flanges for Precision Acme Nuts
Thread onto an externally threaded acme nut to create a custom flange nut.
For technical drawings and 3-D models, click on a part number.
| Flange Thread Size | Flange Dia. | Flange Thick. | Bolt Circle Dia. | Flange Hardness | Each | |
1117 Carbon Steel | ||||||
|---|---|---|---|---|---|---|
| 1 3/8"-16 | 2 49/64" | 33/64" | 2 17/64" | Brinell 156 | 000000000 | 000000 |
| 1 31/32"-18 | 4 13/64" | 53/64" | 3 7/16" | Brinell 156 | 000000000 | 00000 |
| 2 35/64"-18 | 4 15/16" | 29/32" | 4 1/16" | Brinell 156 | 000000000 | 00000 |
| 3 9/64"-12 | 5 3/8" | 1 37/64" | 4 3/8" | Brinell 156 | 000000000 | 00000 |
1215 Carbon Steel | ||||||
| 9/16"-18 | 1 39/64" | 13/32" | 1 1/8" | Not Rated | 000000000 | 00000 |
| 15/16"-16 | 2 5/8" | 17/32" | 2 3/32" | Not Rated | 000000000 | 00000 |
| 1"-18 | 2 5/8" | 17/32" | 2 3/32" | Not Rated | 000000000 | 00000 |
303 Stainless Steel | ||||||
| 9/16"-18 | 1 39/64" | 13/32" | 1 1/8" | Brinell 140 | 0000000 | 00000 |
| 15/16"-16 | 2 5/8" | 17/32" | 2 3/32" | Brinell 140 | 0000000 | 00000 |
| 1"-18 | 2 5/8" | 17/32" | 2 3/32" | Brinell 140 | 0000000 | 00000 |
| 1 3/8"-16 | 2 49/64" | 33/64" | 2 17/64" | Brinell 140 | 0000000 | 00000 |
| 1 31/32"-18 | 4 13/64" | 53/64" | 3 7/16" | Brinell 140 | 0000000 | 00000 |
| 2 35/64"-18 | 4 15/16" | 29/32" | 4 1/16" | Brinell 140 | 0000000 | 00000 |
Metric Precision Acme Lead Screws and Nuts
Pair with a motor in automated motion and positioning applications. A tight thread fit allows these lead screws and nuts to make accurate, repeatable starts and stops. Also known as single-start and self-locking lead screws and nuts, they have a single thread that runs the length of the screw. The nut travels only when the screw turns, so your system won’t unexpectedly move when the lead screw is at rest. To ensure compatibility, select components that have the same thread size.
Manganese bronze nuts have good strength and wear resistance.
Travel distance per turn, also known as screw lead, is the distance a nut moves with one revolution of the lead screw.
For technical drawings and 3-D models, click on a part number.
Flange | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Thread Pitch, mm | Lg. | Dia. | Dia. | Thick. | No. of Thread Starts | Speed Ratio | Travel Distance per Turn, mm | Bolt Circle Dia. | Thread Fit | Hardness | Tensile Strength, psi | Dynamic Thrust Load Cap., lbs. | Specifications Met | Each | |
Manganese Bronze | ||||||||||||||||
M10 | 2 | 5/8" | 0.688" | 1 39/64" | 13/32" | 1 | 1:1 | 2 | 1 1/8" | Class 8E | Brinell 126 | Not Rated | 670 | DIN 103 | 0000000 | 000000 |
| M12 | 3 | 3/4" | 1.125" | 2 39/64" | 17/32" | 1 | 1:1 | 3 | 2 3/32" | Class 8E | Brinell 126 | Not Rated | 1,100 | DIN 103 | 0000000 | 00000 |
| M16 | 3 | 1" | 1.125" | 2 39/64" | 17/32" | 1 | 1:1 | 3 | 2 3/32" | Class 8E | Brinell 126 | Not Rated | 2,000 | DIN 103 | 0000000 | 00000 |
| M20 | 4 | 1 1/4" | 1.125" | 2 39/64" | 17/32" | 1 | 1:1 | 4 | 2 3/32" | Class 8E | Brinell 126 | Not Rated | 3,100 | DIN 103 | 0000000 | 00000 |
| M24 | 5 | 1 1/2" | 1.5" | 2 3/4" | 33/64" | 1 | 1:1 | 5 | 2 17/64" | Class 8E | Brinell 126 | Not Rated | 4,500 | DIN 103 | 0000000 | 00000 |
| M28 | 5 | 1 3/4" | 2.125" | 4 13/64" | 53/64" | 1 | 1:1 | 5 | 3 7/16" | Class 8E | Brinell 126 | 75,000 | 6,100 | DIN 103 | 0000000 | 000000 |
| M40 | 7 | 2 19/64" | 2.125" | 4 13/64" | 53/64" | 1 | 1:1 | 7 | 3 7/16" | Class 8E | Brinell 126 | Not Rated | 12,300 | DIN 103 | 0000000 | 000000 |
Fast-Travel Ultra-Precision Lead Screws and Nuts
Multiple thread channels (also known as thread starts) create faster linear travel than lead screws with a single thread start. Operating with less backlash (play) than Precision Acme Lead Screws and Nuts, these lead screws and nuts provide increased nut life and more reliable movement in automated systems. All components are corrosion resistant for use in harsh environments. To ensure compatibility, select components that have the same thread type, thread size, and number of thread starts.
Travel distance per turn, also known as screw lead, is the distance a nut moves with one revolution of the lead screw.
For technical drawings and 3-D models, click on a part number.
Flange nuts with wear-compensating internal O-ring or wear-compensating spring maintain a tight fit even when their threads begin to wear.
Flange | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Lg. | Dia. | Dia. | Thick. | No. of Thread Starts | Thread Type | Speed Ratio | Travel Distance per Turn | Bolt Circle Dia. | Tensile Strength, psi | Dynamic Thrust Load Cap., lbs. | Each | ||
Acetal Plastic | ||||||||||||||
| B | 1/4"-8 | 1" | 0.5" | 1" | 3/16" | 8 | Rounded Acme | 8:1 | 1" | 3/4" | 9,700 | 50 | 0000000 | 000000 |
| B | 1/4"-16 | 1" | 0.5" | 1" | 3/16" | 4 | Rounded Acme | 4:1 | 0.25" | 3/4" | 9,700 | 50 | 0000000 | 00000 |
| B | 1/4"-20 | 1" | 0.5" | 1" | 3/16" | 2 | Rounded Acme | 2:1 | 0.1" | 3/4" | 9,700 | 50 | 00000000 | 00000 |
| B | 3/8"-5 | 1" | 0.625" | 1 7/64" | 3/16" | 5 | Rounded Acme | 5:1 | 1" | 7/8" | 9,700 | 75 | 0000000 | 00000 |
| B | 3/8"-8 | 1" | 0.625" | 1 7/64" | 3/16" | 4 | Rounded Acme | 4:1 | 0.5" | 7/8" | 9,700 | 75 | 0000000 | 00000 |
| B | 3/8"-10 | 1" | 0.625" | 1 7/64" | 3/16" | 2 | Rounded Acme | 2:1 | 0.2" | 7/8" | 9,700 | 75 | 0000000 | 00000 |
| B | 3/8"-12 | 1" | 0.625" | 1 7/64" | 3/16" | 3 | Rounded Acme | 3:1 | 0.25" | 7/8" | 9,700 | 75 | 00000000 | 00000 |
| B | 1/2"-8 | 1 1/2" | 0.75" | 1 1/2" | 3/16" | 2 | Rounded Acme | 2:1 | 0.25" | 1 1/8" | 9,700 | 150 | 00000000 | 00000 |
| B | 1/2"-8 | 1 1/2" | 0.75" | 1 1/2" | 3/16" | 4 | Rounded Acme | 4:1 | 0.5" | 1 1/8" | 9,700 | 150 | 0000000 | 00000 |
| B | 1/2"-8 | 1 1/2" | 0.75" | 1 1/2" | 3/16" | 8 | Rounded Acme | 8:1 | 1" | 1 1/8" | 9,700 | 150 | 0000000 | 00000 |
| B | 1/2"-10 | 1 1/2" | 0.75" | 1 1/2" | 3/16" | 2 | Rounded Acme | 2:1 | 0.2" | 1 1/8" | 9,700 | 150 | 0000000 | 00000 |
| B | 5/8"-6 | 1 1/2" | 0.875" | 1 1/2" | 3/16" | 12 | Rounded Acme | 12:1 | 2" | 1 3/16" | 9,700 | 220 | 00000000 | 00000 |
| B | 5/8"-8 | 1 1/2" | 0.875" | 1 1/2" | 3/16" | 4 | Rounded Acme | 4:1 | 0.5" | 1 3/16" | 9,700 | 220 | 00000000 | 00000 |
| B | 3/4"-8 | 2" | 1.125" | 1 3/4" | 1/4" | 8 | Rounded Acme | 8:1 | 1" | 1 7/16" | 9,000 | 350 | 00000000 | 00000 |
| B | 3/4"-8 | 2" | 1.125" | 1 51/64" | 1/4" | 2 | Rounded Acme | 2:1 | 0.25" | 1 7/16" | 9,700 | 350 | 0000000 | 00000 |
Acetal Plastic with Wear-Compensating Spring | ||||||||||||||
| B | 3/4"-8 | 2 45/64" | 1.563" | 2 13/32" | 5/16" | 2 | Rounded Acme | 2:1 | 0.25" | 2" | 9,700 | 150 | 0000000 | 000000 |
| C | 1/4"-8 | 1" | 0.5" | 1" | 3/16" | 8 | Rounded Acme | 8:1 | 1" | 3/4" | 9,700 | 5 | 0000000 | 00000 |
| C | 1/4"-16 | 1" | 0.5" | 1" | 3/16" | 4 | Rounded Acme | 4:1 | 0.25" | 3/4" | 9,700 | 5 | 0000000 | 00000 |
| C | 1/4"-20 | 1" | 0.5" | 1" | 3/16" | 2 | Rounded Acme | 2:1 | 0.1" | 3/4" | 9,700 | 5 | 00000000 | 00000 |
| C | 3/8"-5 | 1 29/32" | 0.703" | 1 1/2" | 3/16" | 5 | Rounded Acme | 5:1 | 1" | 1 1/8" | 9,700 | 10 | 0000000 | 00000 |
| C | 3/8"-8 | 1 29/32" | 0.703" | 1 1/2" | 3/16" | 4 | Rounded Acme | 4:1 | 0.5" | 1 1/8" | 9,700 | 10 | 0000000 | 00000 |
| C | 3/8"-10 | 1 29/32" | 0.703" | 1 1/2" | 3/16" | 2 | Rounded Acme | 2:1 | 0.2" | 1 1/8" | 9,700 | 10 | 0000000 | 00000 |
| C | 3/8"-12 | 1 29/32" | 0.703" | 1 1/2" | 3/16" | 3 | Rounded Acme | 3:1 | 0.25" | 1 1/8" | 9,700 | 10 | 00000000 | 00000 |
| C | 1/2"-8 | 2" | 0.891" | 1 39/64" | 17/64" | 2 | Rounded Acme | 2:1 | 0.25" | 1 1/4" | 9,700 | 25 | 00000000 | 00000 |
| C | 1/2"-8 | 2" | 0.891" | 1 39/64" | 17/64" | 4 | Rounded Acme | 4:1 | 0.5" | 1 1/4" | 9,700 | 25 | 0000000 | 00000 |
| C | 1/2"-8 | 2" | 0.891" | 1 39/64" | 17/64" | 8 | Rounded Acme | 8:1 | 1" | 1 1/4" | 9,700 | 25 | 0000000 | 00000 |
| C | 1/2"-10 | 2" | 0.891" | 1 39/64" | 17/64" | 2 | Rounded Acme | 2:1 | 0.2" | 1 1/4" | 9,700 | 25 | 0000000 | 00000 |
| C | 5/8"-6 | 2" | 1.063" | 1 51/64" | 17/64" | 12 | Rounded Acme | 12:1 | 2" | 1 3/8" | 9,700 | 35 | 00000000 | 00000 |
| C | 5/8"-8 | 2" | 1.063" | 1 51/64" | 17/64" | 4 | Rounded Acme | 4:1 | 0.5" | 1 3/8" | 9,700 | 35 | 00000000 | 00000 |
Metric Fast-Travel Ultra-Precision Lead Screws and Nuts
Multiple thread channels (also known as thread starts) create faster linear travel than lead screws with a single thread start. Operating with less backlash (play) than Metric Precision Acme Lead Screws and Nuts, these lead screws and nuts provide increased nut life and more reliable movement in automated systems. To ensure compatibility, select components that have the same thread type, thread size, thread pitch, and number of thread starts.
Nuts are acetal plastic; they have good wear and corrosion resistance.
Travel distance per turn, also known as screw lead, is the distance a nut moves with one revolution of the lead screw.
For technical drawings and 3-D models, click on a part number.
Flange | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Thread Pitch, mm | Lg. | Dia. | Dia. | Wd. | Ht. | Thick. | No. of Thread Starts | Thread Type | Speed Ratio | Travel Distance per Turn, mm | Mounting Hole Ctr.-to-Ctr. | Bolt Circle Dia. | Tensile Strength, psi | Dynamic Thrust Load Cap., lbs. | Temp. Range, °F | Each | ||
Acetal Plastic | |||||||||||||||||||
| C | M2 | 0.5 | 1/2" | 0.297" | __ | 3/4" | 13/32" | 1/8" | 2 | Metric Rounded Trapezoidal | 2:1 | 1 | 39/64" | __ | 8,000 | 10 | -40° to 185° | 000000000 | 000000 |
| C | M4 | 1.25 | 1/2" | 0.297" | __ | 3/4" | 13/32" | 1/8" | 8 | Metric Rounded Trapezoidal | 8:1 | 10 | 39/64" | __ | 8,000 | 25 | -40° to 185° | 000000000 | 00000 |
| C | M5 | 1.25 | 1/2" | 0.297" | __ | 3/4" | 13/32" | 1/8" | 4 | Metric Rounded Trapezoidal | 4:1 | 5 | 39/64" | __ | 8,000 | 25 | -40° to 185° | 000000000 | 00000 |
| D | M8 | 2 | 3/4" | 0.548" | 1 1/8" | __ | __ | 3/16" | 2 | Metric Rounded Trapezoidal | 2:1 | 4 | __ | 7/8" | 8,000 | 75 | -40° to 185° | 000000000 | 00000 |
| E | M8 | 2.5 | 25/32" | 0.787" | 1 27/64" | __ | __ | 5/16" | 4 | Metric Rounded Trapezoidal | 4:1 | 10 | __ | 1 7/64" | 10,000 | Not Rated | -40° to 185° | 0000000 | 00000 |
| E | M10 | 3 | 63/64" | 0.984" | 1 21/32" | __ | __ | 25/64" | 4 | Metric Rounded Trapezoidal | 4:1 | 12 | __ | 1 11/32" | 10,000 | Not Rated | -40° to 185° | 0000000 | 00000 |
| E | M12 | 2.5 | 1 3/8" | 1.102" | 1 57/64" | __ | __ | 15/32" | 2 | Metric Rounded Trapezoidal | 2:1 | 5 | __ | 1 1/2" | 10,000 | Not Rated | -40° to 185° | 0000000 | 00000 |
| E | M16 | 5 | 1 3/8" | 1.102" | 1 57/64" | __ | __ | 15/32" | 7 | Metric Rounded Trapezoidal | 7:1 | 35 | __ | 1 1/2" | 10,000 | Not Rated | -40° to 185° | 0000000 | 00000 |
| E | M20 | 5 | 1 47/64" | 1.26" | 2 11/64" | __ | __ | 15/32" | 4 | Metric Rounded Trapezoidal | 4:1 | 20 | __ | 1 49/64" | 10,000 | Not Rated | -40° to 185° | 0000000 | 000000 |
| E | M20 | 7.5 | 1 47/64" | 1.26" | 2 11/64" | __ | __ | 15/32" | 8 | Metric Rounded Trapezoidal | 8:1 | 60 | __ | 1 49/64" | 10,000 | Not Rated | -40° to 185° | 0000000 | 000000 |
Metric Ultra-Precision Lead Screws and Nuts
Operating with less backlash (play) than Metric Precision Acme Lead Screws and Nuts, these provide increased nut life and more reliable movement in automated systems. Also known as single-start and self-locking lead screws and nuts, they have a single thread that runs the length of the screw. The nut travels only when the screw turns, so your system won't unexpectedly move when the lead screw is at rest. To ensure compatibility, select components that have the same thread type and thread size.
Nuts are acetal plastic; they have good wear and corrosion resistance.
Travel distance per turn, also known as screw lead, is the distance a nut moves with one revolution of the lead screw.
For technical drawings and 3-D models, click on a part number.
Flange | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Thread Pitch, mm | Lg. | Dia. | Dia. | Wd. | Ht. | Thick. | No. of Thread Starts | Thread Type | Speed Ratio | Travel Distance per Turn, mm | Mounting Hole Ctr.-to-Ctr. | Bolt Circle Dia. | Tensile Strength, psi | Dynamic Thrust Load Cap., lbs. | Temperature Range, °F | Each | ||
Acetal Plastic | |||||||||||||||||||
| B | M2 | 0.5 | 1/2" | 0.297" | __ | 3/4" | 13/32" | 1/8" | 1 | Metric Rounded Trapezoidal | 1:1 | 0.5 | 39/64" | __ | 8,000 | 10 | -40° to 185° | 0000000 | 000000 |
| B | M4 | 0.3 | 1/2" | 0.297" | __ | 3/4" | 13/32" | 1/8" | 1 | Metric Rounded Trapezoidal | 1:1 | 0.3 | 39/64" | __ | 8,000 | 25 | -40° to 185° | 0000000 | 00000 |
| C | M8 | 1.5 | 3/4" | 0.548" | 1 1/8" | __ | __ | 3/16" | 1 | Metric Rounded Trapezoidal | 1:1 | 1.5 | __ | 7/8" | 8,000 | 75 | -40° to 185° | 0000000 | 00000 |
Ultra-Precision Lead Screws and Nuts
Operating with less backlash (play) than Precision Acme Lead Screws and Nuts, these provide increased nut life and more reliable movement in automated systems. Also known as single-start and self-locking lead screws and nuts, they have a single thread that runs the length of the screw. The nut travels only when the screw turns, so your system won’t unexpectedly move when the lead screw is at rest. All components are corrosion resistant for use in harsh environments. To ensure compatibility, select components that have the same thread type and thread size.
Travel distance per turn, also known as screw lead, is the distance a nut moves with one revolution of the lead screw.
For technical drawings and 3-D models, click on a part number.
Flange nuts with wear-compensating internal O-ring or wear-compensating spring maintain a tight fit even when their threads begin to wear.
Flange | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Lg. | Dia. | Dia. | Wd. | Ht. | Thick. | No. of Thread Starts | Thread Type | Speed Ratio | Travel Distance per Turn | Mounting Hole Ctr.-to-Ctr. | Bolt Circle Dia. | Tensile Strength, psi | Dynamic Thrust Load Cap., lbs. | Each | ||
Acetal Plastic | |||||||||||||||||
| A | 1/8"-20.8 | 1/2" | 0.4" | __ | 3/4" | 13/32" | 1/8" | 1 | Rounded Acme | 1:1 | 0.048" | 39/64" | __ | 9,000 | 25 | 00000000 | 000000 |
| A | 1/8"-41.7 | 1/2" | 0.4" | __ | 3/4" | 13/32" | 1/8" | 1 | Rounded Acme | 1:1 | 0.024" | 39/64" | __ | 9,000 | 25 | 00000000 | 00000 |
| B | 1/4"-20 | 1" | 0.5" | 1" | __ | __ | 3/16" | 1 | Rounded Acme | 1:1 | 0.05" | __ | 3/4" | 9,700 | 50 | 00000000 | 00000 |
| B | 1/4"-40 | 1" | 0.5" | 1" | __ | __ | 3/16" | 1 | Rounded Acme | 1:1 | 0.025" | __ | 3/4" | 9,000 | 50 | 00000000 | 00000 |
| B | 3/8"-10 | 1" | 0.625" | 1 7/64" | __ | __ | 3/16" | 1 | Rounded Acme | 1:1 | 0.1" | __ | 7/8" | 9,700 | 75 | 0000000 | 00000 |
| B | 3/8"-20 | 1" | 0.625" | 1 7/64" | __ | __ | 3/16" | 1 | Rounded Acme | 1:1 | 0.05" | __ | 7/8" | 9,700 | 75 | 00000000 | 00000 |
| B | 3/8"-40 | 1" | 0.625" | 1 7/64" | __ | __ | 3/16" | 1 | Rounded Acme | 1:1 | 0.025" | __ | 7/8" | 9,700 | 75 | 00000000 | 00000 |
| B | 1/2"-8 | 1 1/2" | 0.75" | 1 1/2" | __ | __ | 3/16" | 1 | Rounded Acme | 1:1 | 0.125" | __ | 1 1/8" | 9,700 | 150 | 00000000 | 00000 |
| B | 1/2"-10 | 1 1/2" | 0.75" | 1 1/2" | __ | __ | 3/16" | 1 | Rounded Acme | 1:1 | 0.1" | __ | 1 1/8" | 9,700 | 150 | 0000000 | 00000 |
| B | 1/2"-20 | 1 1/2" | 0.75" | 1 1/2" | __ | __ | 3/16" | 1 | Rounded Acme | 1:1 | 0.05" | __ | 1 1/8" | 9,700 | 150 | 00000000 | 00000 |
| B | 5/8"-10 | 1 1/2" | 0.875" | 1 1/2" | __ | __ | 3/16" | 1 | Rounded Acme | 1:1 | 0.1" | __ | 1 3/16" | 9,700 | 220 | 00000000 | 00000 |
| B | 3/4"-10 | 2" | 1.125" | 1 51/64" | __ | __ | 1/4" | 1 | Rounded Acme | 1:1 | 0.1" | __ | 1 7/16" | 9,700 | 350 | 00000000 | 00000 |
Acetal Plastic with Wear-Compensating Spring | |||||||||||||||||
| B | 3/4"-10 | 2 45/64" | 1.563" | 2 13/32" | __ | __ | 5/16" | 1 | Rounded Acme | 1:1 | 0.1" | __ | 2" | 9,700 | 150 | 00000000 | 000000 |
| C | 1/4"-20 | 1" | 0.5" | 1" | __ | __ | 3/16" | 1 | Rounded Acme | 1:1 | 0.05" | __ | 3/4" | 9,700 | 5 | 00000000 | 00000 |
| C | 3/8"-10 | 1 29/32" | 0.703" | 1 1/2" | __ | __ | 3/16" | 1 | Rounded Acme | 1:1 | 0.1" | __ | 1 1/8" | 9,700 | 10 | 0000000 | 00000 |
| C | 3/8"-20 | 1 29/32" | 0.703" | 1 1/2" | __ | __ | 3/16" | 1 | Rounded Acme | 1:1 | 0.05" | __ | 1 1/8" | 9,700 | 10 | 00000000 | 00000 |
| C | 3/8"-40 | 1 29/32" | 0.703" | 1 1/2" | __ | __ | 3/16" | 1 | Rounded Acme | 1:1 | 0.025" | __ | 1 1/8" | 9,700 | 10 | 00000000 | 00000 |
| C | 1/2"-8 | 2" | 0.891" | 1 39/64" | __ | __ | 17/64" | 1 | Rounded Acme | 1:1 | 0.125" | __ | 1 1/4" | 9,700 | 25 | 00000000 | 00000 |
| C | 1/2"-10 | 2" | 0.891" | 1 39/64" | __ | __ | 17/64" | 1 | Rounded Acme | 1:1 | 0.1" | __ | 1 1/4" | 9,700 | 25 | 0000000 | 00000 |
| C | 1/2"-20 | 2" | 0.891" | 1 39/64" | __ | __ | 17/64" | 1 | Rounded Acme | 1:1 | 0.05" | __ | 1 1/4" | 9,700 | 25 | 00000000 | 00000 |
| C | 5/8"-10 | 2" | 1.063" | 1 51/64" | __ | __ | 17/64" | 1 | Rounded Acme | 1:1 | 0.1" | __ | 1 3/8" | 9,700 | 35 | 00000000 | 00000 |