A band of green, yellow, and red provides a clear indication of changes in differential pressure.

Also known as isolators or diaphragm seals, these protect gauges from corrosive process media.

Read pressure directly at the source and send data remotely with one device.

Measure your equipment’s pressure and send the data directly to a development board or single-board computer. Also known as transducers, these transmitters convert pressure into an electrical I²C signal and transmit it to your board.

For use in sanitary applications such as food processing, these transmitters are 3-A certified.

These transmitters automatically compensate for error introduced by vibration as well as temperature fluctuations, so you do not need to program your receiving device to correct for these factors. They convert pressure to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment.

Used in food-processing and pharmaceutical plants to automatically compensate for temperature changes and errors caused by vibration, these transmitters have a sanitary design certified by 3-A.

Monitor and control vacuum pumps, air compressors, and hydraulics while viewing readings and warnings on a display. With two outputs, these transmitters—also known as transducers—can be used as a transmitter, a switch, or both.

These transmitters automatically compensate for error introduced into both pressure and vacuum measurements by vibrations as well as temperature fluctuations, so you do not need to program corrections for these factors into your receiving device. They convert pressure and vacuum to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment.

Often used in HVAC systems and clean room airflow monitoring applications, these transmitters measure the difference in pressure between two low-pressure process lines.

For use in hazardous locations, these transmitters safely measure the difference in pressure between two process lines in flow applications—such as heat exchangers, chillers, and pumps. They meet NEC safety standards, so they protect against an explosion where flammable gases and vapors are present.

Monitor and control equipment in food-processing and pharmaceutical plants—these transmitters convert vacuum into electrical signals for receiving devices and have a 3-A certified sanitary design. They automatically compensate for vibration and temperature changes, saving you the effort of programming manual corrections.