The small dial on these gauges allows for installation in tight spaces.

A digital display allows for easy reading of measurements.

The case material and connection threads are stainless steel for protection in corrosive environments, plus the dial is glycerin-filled to reduce needle flutter in high-vibration applications.

Designed for harsh environments prone to vibration, these gauges pair a corrosion-resistant 304 stainless steel case with a glycerin-filled dial that reduces needle flutter.

A digital display allows for easy reading of measurements.

Designed for harsh environments prone to vibration, these gauges pair a corrosion-resistant 304 stainless steel case with a glycerin-filled dial to reduce needle flutter.

Measure small changes in air pressure with these gauges. They are commonly used to indicate clogged filters and to monitor fans and blowers.

Commonly used to indicate clogged filters, these gauges display the difference between two pressure or vacuum measurements.

With a pressure range common to most compressed air systems, use these transmitters to monitor your system's air pressure.

Check the difference in air pressure between two inputs at the source using the dial indicator or remotely using a receiver.

Designed for compressed air and gas systems, these transmitters remotely monitor vacuum.

Check pressure without permanently installing a gauge.

Valves have a brass body and NPT connections.

Maintain contaminant-free standards in clean room environments. These valves come cleaned and bagged to Fed. Spec. Class 100 and ISO Class 5 clean room standards and have a 316 stainless steel body with a smooth finish to resist dust collection.

Regulate pressure in air and inert gas systems from your instrument panel—these valves have threads below the adjustment knob and come with a panel-mount nut.

Threads below the adjustment knob and an included panel-mount nut allow you to add these valves to your instrument panel.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Cleaned and double bagged in an ISO Class 3 and Fed. Spec. Class 1 clean room for protection from contamination, these regulators are suitable for use in clean rooms.

Designed for installation directly to your air-powered tool, these regulators maintain the set air pressure.

No need to worry about unintentional changes to your pressure setting—these regulators maintain a fixed outlet pressure.

Mount these regulators to a 35 mm DIN rail with the included brackets.

Mount these regulators to a 35 mm DIN rail or a wall with one of the two included brackets.