Measure your equipment’s pressure and send the data directly to a development board or single-board computer. Also known as transducers, these transmitters convert pressure into an electrical I²C signal and transmit it to your board.

Monitor and control pressure in portable HVAC systems, hydraulics, and oil and gas equipment. Unlike other pressure transmitters that measure the difference between your system and the atmosphere, these transmitters give measurements relative to zero pressure—regardless of altitude or temperature.

For use in sanitary applications such as food processing, these transmitters are 3-A certified.

At least five times as accurate as standard pressure transmitters, these transmitters sense pressure at an accuracy of ±0.1%, making them ideal for use in laboratories and in analytical testing applications.

Safely monitor liquid, gas, and steam pressure in hazardous locations with these transmitters. They meet NEC safety standards, so they protect against an explosion where flammable gases and vapors are present.

With an accuracy of ±0.25%, use these transmitters in applications that require highly accurate measurement of both pressure and vacuum, such as activating vacuum pumps.

These transmitters automatically compensate for error introduced into both pressure and vacuum measurements by vibrations as well as temperature fluctuations, so you do not need to program corrections for these factors into your receiving device. They convert pressure and vacuum to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment.

At least twice as accurate as standard transmitters, these transmitters sense differential pressure at an accuracy of ±0.25%.

Measure the difference in pressure between two process lines in flow applications such as heat exchangers, chillers, and pumps. These transmitters automatically compensate for error introduced by vibration as well as temperature fluctuations, so you do not need to program your receiving device to correct for these factors.

At least four times as accurate as standard vacuum transmitters, these transmitters sense vacuum at an accuracy of ±0.25%, making them ideal for use in laboratories and in analytical testing applications.

These switches electrically activate automated controls or alarms when a set pressure is reached.

At only 1 1/4" wide, these compact switches are a good fit for cramped spaces. They are often used in pump and hydraulic power applications.

These medium-pressure switches electrically activate automated controls or alarms when a set pressure is reached.

Sensitive to low pressures, these switches electrically activate automated controls or alarms when a set pressure is reached.

Use in high-temperature applications up to 300° F.

Use in high-temperature applications up to 220° F.

Built with an explosionproof enclosure to meet NEMA 7 and 9 standards for hazardous locations, these switches were tested and verified by UL and CSA for use where explosive liquids, dust, and gas are present.

Use in medium-pressure applications up to 540 psi.

Send two digital signals to your programmable logic controller (PLC) to trigger different processes—these switches activate at two set pressures.

With a maximum setpoint of 360 psi or higher, you can trigger controls and alarms at high pressures while adjusting and monitoring them from the display.

Switches have a digital display for easy monitoring at the source of your application.

These switches are protected from dirt and washdowns.

These switches electrically activate automated controls or alarms when a set vacuum is reached.

These switches operate based on the difference in pressure between two process lines. When the differential pressure exceeds your setpoint, the switch is activated.

These switches are rated NEMA 4 for protection from dirt and washdowns.

Also known as load cells, these sensors measure and track the forces of your equipment by converting them into electrical signals.

Housing is plastic.

These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

Press the side of the gauge tip against an object to record the amount of tension required to move it.

The large dial makes these gauges easy to read. They measure tension force as well as weight.

Weigh and measure tension force at a safe distance, up to 450 feet away, with these wireless gauges. Also known as dynamometers and crane scales, they’re used with cranes or hoists while moving material around your plant.

Use the included Windows-compatible software to upload measurement data.

Grip paper, film, and thin plastic.

Place your tool and the included square drive connector on the tester and turn.

These testers have a digital display and are accurate to ±1%.

Measure the distance to objects and the level of liquids and materials despite size, shape, or surface finish, and send that information to other parts of your system.

The metal body can withstand oil.

Alter the set point with the adjustment screw to suit your application.

Designed for applications with consistent flow, these switches have a fixed set point.

For flow monitoring at a glance, these switches have a plastic window with a rotor that spins when flow is present.

For installation in environments with flammable gases and combustible dust, these flow switches are UL listed for use in hazardous locations.

Combine a push-button actuator with a switching mechanism to build a complete switch.

Use this switch to sense changes in airflow velocity.