Container Type Container Type |
---|
|
For Use On For Use On |
---|
Color Color | Show |
---|
![]() | Amber |
Type Type |
---|
|
Specifications Met Specifications Met |
---|
|
Consistency Consistency |
---|
|
Clarity Clarity |
---|
|
Manufacturer Model Name Manufacturer Model Name |
---|
|
Application Time After Mixing Application TimeAfter Mixing |
---|
|
Approximate Coverage @ Thickness Approximate Coverage@ Thickness |
---|
|
Composition Composition |
---|
|
Mix Ratio Mix Ratio |
---|
|
More
More
Use these primers on concrete floors before antislip coatings to maximize longevity. They do not contain grit. Apply with a brush or roller. The size listed is the combined total of the two parts.
Container Size, oz. | Composition | Approx. Coverage @ Thick. | Application Time After Mixing, hrs. | Color | Each | |
96 | Solvent Based | 200 sq. in. @ 2 mil | 1 | Amber | 0000000 | 0000000 |
To speed cure time on coated fasteners, aluminum, stainless steel, or titanium, apply these primers before using threadlocker or retaining compound. They also work with no-mix acrylic adhesives.
Primers in brush-top bottles also include a spray head for easy dispensing.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Drying Time | Consistency | Viscosity, cP | Color | Specifications Met | Each | |
Loctite® Primers | |||||||||
7471 | 1.75 oz. | Brush-Top Bottle, Spray Bottle | 30 sec. | Thin Liquid | 2 | Amber | MIL-S-22473E | 00000000 | 000000 |
7471 | 4.5 oz. | Aerosol Can | 30 sec. | Thin Liquid | 2 | Amber | MIL-S-22473E | 00000000 | 00000 |
7471 | 1 gal. | Can | 30 sec. | Thin Liquid | 2 | Amber | MIL-S-22473E | 00000000 | 000000 |
Use these primers with structural epoxies, acrylics, and urethanes to promote bonding to EPDM rubber, polyolefin, and thermoplastic elastomers.
Container | |||||||
---|---|---|---|---|---|---|---|
Size, oz. | Type | Drying Time, min. | Consistency | Viscosity, cP | Color | Each | |
8 | Can | 60 | Thin Liquid | 10 | Amber | 0000000 | 000000 |
Shorten the time it takes instant-bond adhesives to reach full strength. Apply these accelerators before bonding with instant-bond adhesives for strength, or after bonding to keep adhesive from turning cloudy.
Bottles of Scotch-Weld 87937, 712, 7109, and 7113 include both a brush and spray head for easy dispensing.
Scotch-Weld 87937 also works as a primer on porous materials.
Container | |||||||
---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Consistency | Viscosity, cP | Color | Each | |
3M Scotch-Weld Accelerators | |||||||
87937 | 2 oz. | Brush-Top Bottle, Spray Bottle | Thin Liquid | 10 | Amber | 00000000 | 000000 |
Spray these primers onto a mounting surface to quickly and smoothly apply signs, labels, and protective films. These primers float adhesive-backed sheets above a surface until you press them down, giving you time to position the sheet and remove any wrinkles. Since the sheet doesn’t stick right away, you can apply large sheets without needing a second pair of hands. These primers also work with non-adhesive films. Even in hot or cold temperatures, your sheet will stay put.
Clean the mounting surface with primer before applying a film, so no residue is trapped underneath. Use a smoothing tool (sold separately) to squeeze out air bubbles and excess fluid. Drying time depends on application—most decals and films will dry within 90 seconds, but 3D printer sheets should dry for 24 hours before printing.