Container Type Container Type |
|---|
 | Bottle |
For Use On For Use On |
|---|
|
Color Color | Show |
|---|
 | Blue |
Consistency Consistency |
|---|
|
Specifications Met Specifications Met |
|---|
|
Manufacturer Manufacturer |
|---|
|
Locking Strength Locking Strength |
|---|
|
Clarity Clarity |
|---|
|
Drying Time Drying Time |
|---|
|
Removal Method Removal Method |
|---|
|
Formulation Formulation |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Mixing Required Mixing Required |
|---|
|
For Maximum Thread Diameter For MaximumThread Diameter |
|---|
|
Manufacturer Model Number Manufacturer Model Number |
|---|
|
Breakaway Torque Breakaway Torque |
|---|
|
Maximum Gap Size Filled Maximum Gap Size Filled |
|---|
|
Shear Strength Shear Strength |
|---|
|
For Use With For Use With |
|---|
|
About Structural Adhesives
More
Primers for Threadlockers, Retaining
Compounds, and Acrylic Adhesives
To speed cure time on coated fasteners, aluminum, stainless steel, or titanium, apply these primers before using threadlocker or retaining compound. They also work with no-mix acrylic adhesives.
Container | ||||||||
|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size | Type | Drying Time | Consistency | Viscosity, cP | Color | Each | |
Loctite® Primers | ||||||||
| 7090 | 1 oz. | Bottle | Instant | Thin Liquid | 20 | Blue | 0000000 | 000000 |
Retaining Compounds for Close-Fitting Parts
Fill gaps up to 0.01" to secure unthreaded cylindrical metal parts such as shafts, bearings, and press-fit assemblies. These retaining compounds begin to harden once coated surfaces are pressed together, blocking exposure to air.
Primer (sold separately) cleans the surface and decreases the time to reach full strength. It is recommended when working with aluminum, stainless steel, and titanium; black-oxide finishes, and cadmium and zinc coatings.
Container | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Temp. Range, °F | Consistency | Viscosity, cP | Shear Strength, lbs./sq. in. | Color | Each | |
Medium Locking Strength | |||||||||||
Retaining Compounds | |||||||||||
| 1.69 | Bottle | 0.005" | 30 min. | 24 hrs. | -65° to 300° | Thin Liquid | 20 | Not Rated | Blue | 00000000 | 000000 |
| 1.69 | Bottle | 0.005" | 30 min. | 24 hrs. | -65° to 300° | Thin Liquid | 170 | Not Rated | Blue | 00000000 | 00000 |
Threadlockers for Drinking Water
Primer (sold separately) cleans the surface and decreases the time to reach full strength. It is recommended when working with aluminum, stainless steel, and titanium; black-oxide finishes, and cadmium and zinc coatings.
Threadlockers begin to harden once coated surfaces are threaded together and exposure to air is blocked.
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, oz. | Type | Begins to Harden | Reaches Full Strength | Temp. Range, °F | For Max. Thread Dia. | Consistency | Viscosity, cP | Breakaway Torque, in.-lbs. | Color | Specifications Met | Each | |
Medium Locking Strength | ||||||||||||
Threadlockers | ||||||||||||
| 1.69 | Bottle | 5 min. | 24 hrs. | -65° to 350° | 3/4" | Thick Liquid | 1,800 | 150 | Blue | ASTM D5363, MIL-S-46163 Grade N Type II, NSF/ANSI 61 | 00000000 | 000000 |
Threadlockers
Prevent threaded fasteners from loosening due to shock and vibration. These threadlockers begin to harden once coated surfaces are threaded together and exposure to air is blocked. Primer (sold separately) cleans the surface and decreases the time to reach full strength. It is recommended when working with aluminum, stainless steel, and titanium; black-oxide finishes; and cadmium and zinc coatings.
Threadlockers with medium locking strength require a hand tool to unthread.
Container | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, oz. | Type | Begins to Harden | Reaches Full Strength | Temp. Range, °F | For Max. Thread Dia. | Consistency | Viscosity, cP | Breakaway Torque, in.-lbs. | Color | Each | |
Medium Locking Strength | |||||||||||
Threadlockers | |||||||||||
| 0.34 | Bottle | 30 min. | 24 hrs. | -65° to 300° | 3/4" | Thin Liquid | 120 | 100 | Blue | 00000000 | 000000 |
| 1.69 | Bottle | 30 min. | 24 hrs. | -65° to 300° | 3/4" | Thin Liquid | 120 | 100 | Blue | 00000000 | 00000 |
| 8.45 | Bottle | 30 min. | 24 hrs. | -65° to 300° | 3/4" | Thin Liquid | 120 | 100 | Blue | 00000000 | 000000 |