Vibration-Resistant Drive Anchors for Block and Brick

Best for securing heavy machinery with constant motion, such as vibrating feeders and conveyors, to walls and floors, these anchors won’t shake loose. As you hammer in the pin, the anchor body expands while the ridges bite into your hole’s walls for a superior grip. These anchors require more force to install than sleeve anchors, so the block and brick you are installing them in should not be worn or cracked.

To install, position the nut and insert the anchor through your machinery into a drilled hole. Then, hammer the pin until it's flush with the top of the bolt, ensuring the anchor is fully set.

Pin Drive Anchor—You can remove your machinery by unfastening the nut, but the anchor itself cannot be removed without prying out the pin.

Zinc-Plated Steel—The most common choice for areas with occasional exposure to moisture.