1495N15 | Mounted Sealed Tapered-Roller Bearing

Filter by

System of Measurement

Shaft Diameter

Mounted Bearing Type

Four-Bolt Flange Mount

Panel Mount

Tapped Base Mount

Thread Mount

Three-Bolt Flange Mount

Two-Bolt Flange Mount

Shaft Mount Type

Bearing Seal Type

Housing Material

Overall Length

Mounting Hole Center-to-Center

Bearing Type

Center Height

Overall Width

Alignment Style

Bearing Material

For Load Direction

Combined Radial and Thrust

Radial

Dynamic Radial Load Capacity

Less than 1,000 lb.

1,000 lb. to 1,999 lb.

2,000 lb. to 9,999 lb.

10,000 lb. to 19,999 lb.

20,000 lb. or greater

Overall Height

Material

Lubrication

Grease Fitting Included

RoHS

REACH

Export Control Classification Number (ECCN)

1C998

1C999

EAR99

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Exempt

Static Radial Load Capacity

Less than 10,000 lb.

10,000 lb. to 19,999 lb.

20,000 lb. to 29,999 lb.

30,000 lb. to 99,999 lb.

100,000 lb. or greater

Forward

How can we improve?

1,164 Products

Mounted Ball Bearings

Smoother than smooth—the balls inside these bearings roll nearly friction-free. The sturdy housing bolts down to support shafts as they turn.

Lubricate regularly to keep your bearing in tip-top shape. Bearings with seals and shields keep lubricants in and contaminants out, and come packed with grease. Open bearings require initial lubrication and offer less protection against dust and debris.

Powder-Coated Cast Iron Housing—A rugged iron base coated in thick powder that protects against water, mild detergents, and oil. However, if the coating is scratched or chipped, the underlying iron may rust.

Nickel-Plated Cast Iron Housing—Combine the strength of iron with the corrosion resistance of stainless steel at an affordable price point. Nickel-plated iron is also unlikely to chip.

Polyester Plastic Housing—Lightweight and naturally rust-resistant, with a smooth surface that's easy to wipe clean.

Aluminum Housing—One-third the weight of cast iron but not as strong. Aluminum also resists corrosion.

Press Fit—For a tight connection to the shaft, install with a press or by heating and then cooling the bearing. Also known as an interference fit.

Set Screw—Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces.

Clamp On—Tighten the clamping screw to close the collar around your shaft for a secure, mar-free grip. The collar centers the shaft, decreasing vibration and allowing for higher speeds than set screws. Also known as concentric lock bearings.

Eccentric Lock—An off-center opening wedges against the shaft to grip it as it turns. Eccentric locks won't mar the shaft like a set screw, but the shaft will only rotate in one direction, so they aren't suitable for applications where the load will be reversed.

Locknut—Tighten the nut for a strong hold that stands up to heavy vibrations without letting go. An adapter sleeve is required and sold separately.

Sealmaster—Famous for exceptional sealing, Sealmaster bearings include a signature three-part seal in the inner ring. This design blocks out gritty debris and purges old grease to extend the life of the bearing.

SKF—Manufactured in Europe with a strong focus on precision. The more precise the bearing, the more efficiently it will run.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

	Bearings												Required Adapter Sleeves		Replacement Bearings
			Overall
	For Shaft Dia.	Ctr. Ht.	Lg.	Wd.	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Bearing Material	Bearing Seal Type	Misalignment Capability	Manufacturer		Each		Each		Each
Powder-Coated Cast Iron Housing







				Set Screw

				1/2"	1 3/16"	5"	1 1/2"	2,600	7,300	Steel	Sealed	2°	Sealmaster	7728T51	0000000	———	0	———	0


				5/8"	1 3/16"	5"	1 1/2"	2,600	7,300	Steel	Sealed	2°	Sealmaster	7728T52	000000	———	0	7728T112	000000
				3/4"	1 5/16"	5"	1 1/2"	2,600	7,300	Steel	Sealed	2°	Sealmaster	7728T53	000000	———	0	7728T113	00000
				7/8"	1 7/16"	5 1/2"	1 1/2"	2,800	6,300	Steel	Sealed	2°	Sealmaster	7728T54	000000	———	0	7728T114	000000
				15/16"	1 7/16"	5 1/2"	1 1/2"	2,800	6,300	Steel	Sealed	2°	Sealmaster	7728T55	000000	———	0	———	0
				1"	1 7/16"	5 1/2"	1 27/64"	2,800	5,500	Steel	Sealed	2°	McMaster-Carr Approved	6244K56	00000	———	0	———	0
				1"	1 7/16"	5 1/2"	1 1/2"	2,800	6,300	Steel	Sealed	2°	Sealmaster	7728T56	000000	———	0	7728T116	000000
				1 1/8"	1 11/16"	6 1/2"	1 7/8"	4,350	5,400	Steel	Sealed	2°	Sealmaster	7728T57	000000	———	0	7728T117	000000
				1 3/16"	1 11/16"	6 1/2"	1 7/8"	4,350	5,400	Steel	Sealed	2°	Sealmaster	7728T58	000000	———	0	7728T118	000000
				1 1/4"	1 11/16"	6 1/2"	1 7/8"	4,350	5,400	Steel	Sealed	2°	Sealmaster	7728T73	000000	———	0	7728T121	000000
				1 1/4"	1 7/8"	6 9/16"	1 7/8"	5,750	5,400	Steel	Sealed	2°	Sealmaster	7728T71	000000	———	0	7728T119	000000


				1 3/8"	1 7/8"	6 9/16"	1 7/8"	5,750	4,600	Steel	Sealed	2°	Sealmaster	7728T72	000000	———	0	7728T122	000000
				1 7/16"	1 7/8"	6 9/16"	1 15/16"	5,750	4,600	Steel	Sealed	2°	Sealmaster	7728T61	000000	———	0	7728T123	000000
				1 1/2"	1 15/16"	7 1/4"	2 1/8"	7,300	4,100	Steel	Sealed	2°	Sealmaster	7728T62	000000	———	0	7728T124	000000
				1 1/2"	2"	7 1/16"	1 59/64"	7,330	3,500	Steel	Sealed	2°	McMaster-Carr Approved	6244K62	000000	———	0	———	0
				1 11/16"	2 1/8"	7 1/2"	2 1/8"	7,900	3,800	Steel	Sealed	2°	Sealmaster	7728T63	000000	———	0	7728T125	000000
				1 3/4"	2 1/8"	7 1/2"	2 1/4"	7,900	3,800	Steel	Sealed	2°	Sealmaster	7728T74	000000	———	0	7728T151	000000
				1 7/8"	2 1/4"	8 1/8"	2 15/32"	7,850	3,500	Steel	Sealed	2°	Sealmaster	7728T75	000000	———	0	———	0
				1 15/16"	2 1/4"	8 1/8"	2 3/8"	7,850	3,500	Steel	Sealed	2°	Sealmaster	7728T64	000000	———	0	7728T126	000000
				2"	2 1/2"	8 5/8"	2 3/8"	9,750	3,200	Steel	Sealed	2°	Sealmaster	7728T65	000000	———	0	7728T128	000000
				2 3/16"	2 1/2"	8 5/8"	2 3/8"	9,750	3,200	Steel	Sealed	2°	Sealmaster	7728T66	000000	———	0	7728T129	000000


				2 1/4"	2 3/4"	9 1/2"	2 15/16"	11,700	3,000	Steel	Sealed	2°	Sealmaster	7728T76	000000	———	0	———	0
				2 7/16"	2 3/4"	9 1/2"	2 3/4"	11,700	3,000	Steel	Sealed	2°	Sealmaster	7728T67	000000	———	0	7728T131	000000
				20 mm	33.3 mm	127 mm	38 mm	2,600	7,300	Steel	Sealed	2°	Sealmaster	7835T51	000000	———	0	7835T111	000000
				25 mm	36.5 mm	140 mm	39.7 mm	2,800	6,300	Steel	Sealed	2°	Sealmaster	7835T52	000000	———	0	7835T112	000000
				30 mm	42.9 mm	165 mm	48 mm	4,350	5,400	Steel	Sealed	2°	Sealmaster	7835T53	000000	———	0	7835T113	000000
				35 mm	47.6 mm	167 mm	49.2 mm	5,750	4,600	Steel	Sealed	2°	Sealmaster	7835T54	000000	———	0	7835T114	000000
				40 mm	49.2 mm	184 mm	57.2 mm	7,300	4,100	Steel	Sealed	2°	Sealmaster	7835T55	000000	———	0	7835T115	000000
				45 mm	54 mm	191 mm	57.2 mm	7,900	3,800	Steel	Sealed	2°	Sealmaster	7835T56	000000	———	0	———	0
				50 mm	57.2 mm	206 mm	62.3 mm	7,850	3,500	Steel	Sealed	2°	Sealmaster	7835T57	000000	———	0	7835T117	000000
				60 mm	69.9 mm	241.3 mm	74.7 mm	11,700	3,000	Steel	Sealed	2°	Sealmaster	7835T59	000000	———	0	———	0


				75 mm	88.9 mm	330.2 mm	89 mm	14,800	2,400	Steel	Sealed	2°	Sealmaster	7835T6	000000	———	0	———	0




						Clamp On

						3/4"	1 5/16"	5"	1 1/2"	2,600	10,200	Steel	Sealed	2°	Sealmaster	2722T31	000000	———	0	———	0


						7/8"	1 7/16"	5 1/2"	1 1/2"	2,800	9,000	Steel	Sealed	2°	Sealmaster	2722T32	000000	———	0	———	0
						1"	1 7/16"	5 1/2"	1 1/2"	2,800	9,000	Steel	Sealed	2°	Sealmaster	2722T34	000000	———	0	———	0
						1 1/8"	1 11/16"	6 1/2"	1 7/8"	4,350	7,600	Steel	Sealed	2°	Sealmaster	2722T35	000000	———	0	———	0
						1 3/16"	1 11/16"	6 1/2"	1 7/8"	4,350	7,600	Steel	Sealed	2°	Sealmaster	2773T23	000000	———	0	———	0
						1 1/4"	1 11/16"	6 1/2"	1 7/8"	4,350	7,600	Steel	Sealed	2°	Sealmaster	2722T36	000000	———	0	———	0
						1 3/8"	1 7/8"	6 9/16"	1 7/8"	5,750	6,500	Steel	Sealed	2°	Sealmaster	2722T37	000000	———	0	———	0
1 7/16"						1 7/8"	6 9/16"	1 55/64"	5,700	5,300	Steel	Shielded	2°	SKF	2722T24	000000	———	0	———	0
1 7/16"	1 7/8"					6 9/16"	1 7/8"	5,750	6,500	Steel	Sealed	2°	Sealmaster	2722T38	000000	———	0	———	0
1 1/2"	1 15/16"					7 1/4"	2 1/8"	7,300	5,850	Steel	Sealed	2°	Sealmaster	2722T39	000000	———	0	———	0
1 3/4"	2 1/8"					7 1/2"	2 1/8"	7,900	5,300	Steel	Sealed	2°	Sealmaster	2722T41	000000	———	0	———	0


1 15/16"	2 1/4"	8 1/8"	2 3/16"			7,900	4,000	Steel	Shielded	2°	SKF	2722T27	000000	———	0	———	0
2"	2 1/2"	8 5/8"	2 3/8"			9,750	5,000	Steel	Sealed	2°	Sealmaster	2722T42	000000	———	0	———	0
2 7/16"	2 3/4"	9 1/2"	2 3/4"			11,700	4,100	Steel	Sealed	2°	Sealmaster	2722T43	000000	———	0	———	0




		Eccentric Lock

		1/2"	1 1/16"			5 7/16"	1 1/2"	2,100	9,500	Steel	Sealed	2°	SKF	6361K52	00000	———	0	———	0


		5/8"	1 1/16"			5 15/32"	1 1/2"	2,150	9,500	Steel	Sealed	2°	SKF	6361K33	00000	———	0	6361K212	00000
		3/4"	1 1/4"			5"	1 19/32"	2,850	8,500	Steel	Sealed	2°	SKF	6361K34	00000	———	0	6361K213	00000
		7/8"	1 5/16"			5 1/2"	1 43/64"	3,150	7,000	Steel	Sealed	2°	SKF	6361K35	00000	———	0	6361K214	00000
		1"	1 5/16"			5 1/2"	1 43/64"	3,150	7,000	Steel	Sealed	2°	SKF	6361K37	00000	———	0	6361K216	00000
		1 1/8"	1 9/16"			6 1/2"	1 59/64"	4,350	6,300	Steel	Sealed	2°	SKF	6361K38	000000	———	0	———	0
		1 3/16"	1 9/16"			6 1/2"	2 1/16"	4,350	6,300	Steel	Sealed	2°	SKF	6361K39	000000	———	0	———	0
		1 1/4"	1 13/16"			6 9/16"	2 1/16"	5,700	5,300	Steel	Sealed	2°	SKF	6361K41	000000	———	0	6361K221	00000
		1 3/8"	1 13/16"			6 9/16"	2 1/16"	5,700	5,300	Steel	Sealed	2°	SKF	6361K42	000000	———	0	6361K222	00000
		1 7/16"	1 13/16"			6 9/16"	2 1/16"	5,700	5,300	Steel	Sealed	2°	SKF	6361K43	00000	———	0	6361K223	00000
		1 1/2"	1 15/16"			7 1/4"	2 1/4"	6,900	4,800	Steel	Sealed	2°	SKF	6361K44	000000	———	0	6361K224	00000


		1 3/4"	2 1/16"			7 15/32"	2 19/64"	7,450	4,300	Steel	Sealed	2°	SKF	6361K46	000000	———	0	———	0
		1 15/16"	2 3/16"			8 1/8"	2 3/8"	7,850	4,000	Steel	Sealed	2°	SKF	6361K47	000000	———	0	6361K227	000000
		2"	2 7/16"			8 5/8"	2 37/64"	9,800	3,600	Steel	Sealed	2°	SKF	6361K51	000000	———	0	6361K231	000000
		2 3/16"	2 7/16"			8 5/8"	2 9/16"	9,800	3,600	Steel	Sealed	2°	SKF	6361K53	000000	———	0	———	0
		20 mm	33.3 mm			127 mm	39.5 mm	2,850	8,500	Steel	Sealed	2°	SKF	7835T125	000000	———	0	———	0
		20 mm	33.3 mm			127 mm	42.6 mm	2,850	8,500	Steel	Sealed	2°	SKF	7835T126	000000	———	0	———	0
		25 mm	36.5 mm			130 mm	41.5 mm	3,100	7,000	Steel	Sealed	2°	SKF	7835T127	000000	———	0	———	0
		25 mm	36.5 mm			130 mm	44.9 mm	3,100	7,000	Steel	Sealed	2°	SKF	7835T128	000000	———	0	———	0
		30 mm	42.9 mm			152 mm	46.7 mm	4,350	6,300	Steel	Sealed	2°	SKF	7835T129	000000	———	0	———	0
		30 mm	42.9 mm			152 mm	50.1 mm	4,350	6,300	Steel	Sealed	2°	SKF	7835T131	000000	———	0	———	0


		40 mm	49.2 mm			175 mm	58.9 mm	6,900	4,800	Steel	Sealed	2°	SKF	7835T135	000000	———	0	———	0
		45 mm	54 mm			187 mm	56.7 mm	7,450	4,300	Steel	Sealed	2°	SKF	7835T136	000000	———	0	———	0
		50 mm	57.2 mm			203 mm	65.1 mm	7,850	4,000	Steel	Sealed	2°	SKF	7835T139	000000	———	0	———	0




						Locknut

						25 mm	42.9 mm	165 mm	43 mm	4,350	6,300	Steel	Sealed	2°	SKF	7835T146	00000	7835T147	000000	———	0


				30 mm	47.6 mm	167 mm	47.3 mm	5,700	5,300	Steel	Sealed	2°	SKF	7835T148	000000	7835T149	00000	———	0
				35 mm	49.2 mm	184 mm	51.5 mm	6,900	4,800	Steel	Sealed	2°	SKF	7835T151	000000	7835T152	00000	———	0
				40 mm	54 mm	190 mm	54.5 mm	7,450	4,300	Steel	Sealed	2°	SKF	7835T153	000000	7835T154	00000	———	0
				55 mm	69.8 mm	241 mm	66.8 mm	11,800	3,400	Steel	Sealed	2°	SKF	7835T159	000000	7835T161	000000	———	0
				60 mm	76.2 mm	265 mm	70.8 mm	12,850	3,000	Steel	Sealed	2°	SKF	7835T162	000000	7835T164	00000	———	0


				Nickel-Plated Cast Iron Housing







								Set Screw

								1/2"	1 3/16"	5"	1 7/16"	2,850	5,500	Steel	Sealed	2°	McMaster-Carr Approved	6494K67	00000	———	0	———	0


								5/8"	1 3/16"	5"	1 1/2"	2,870	5,800	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K11	00000	———	0	———	0
3/4"								1 5/16"	5"	1 1/2"	2,870	5,800	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K13	00000	———	0	———	0
7/8"	1 7/16"							5 1/2"	1 33/64"	3,100	5,500	Steel	Sealed	2°	McMaster-Carr Approved	6494K68	00000	———	0	———	0
15/16"	1 7/16"							5 1/2"	1 33/64"	3,100	5,000	Steel	Sealed	2°	McMaster-Carr Approved	6494K69	00000	———	0	———	0
1"	1 7/16"							5 1/2"	1 17/32"	3,140	5,100	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K14	00000	———	0	———	0
1 1/8"	1 11/16"							6 1/2"	1 51/64"	4,350	4,000	Steel	Sealed	2°	McMaster-Carr Approved	6494K71	00000	———	0	———	0
1 3/16"	1 11/16"							6 1/2"	1 51/64"	4,350	4,000	Steel	Sealed	2°	McMaster-Carr Approved	6494K72	00000	———	0	———	0
1 1/4"	1 7/8"							6 9/16"	1 61/64"	5,770	3,700	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K16	00000	———	0	———	0
1 5/16"	1 7/8"							6 9/16"	1 15/16"	5,750	3,500	Steel	Sealed	2°	McMaster-Carr Approved	6494K73	00000	———	0	———	0
1 3/8"	1 7/8"							6 9/16"	1 15/16"	5,750	3,500	Steel	Sealed	2°	McMaster-Carr Approved	6494K74	00000	———	0	———	0


1 7/16"	1 7/8"							6 9/16"	1 15/16"	5,750	3,500	Steel	Sealed	2°	McMaster-Carr Approved	6494K75	00000	———	0	———	0
1 1/2"	1 15/16"							7 1/4"	2 1/4"	6,540	3,300	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K19	00000	———	0	———	0
1 5/8"	2 1/8"							7 15/32"	2 1/4"	7,650	3,000	Steel	Sealed	2°	McMaster-Carr Approved	6494K76	00000	———	0	———	0
1 11/16"	2 1/8"							7 15/32"	2 1/4"	7,650	3,000	Steel	Sealed	2°	McMaster-Carr Approved	6494K77	00000	———	0	———	0
1 3/4"	2 1/8"							7 15/32"	2 1/4"	7,650	3,000	Steel	Sealed	2°	McMaster-Carr Approved	6494K78	00000	———	0	———	0
1 7/8"	2 1/4"							8 1/8"	2 15/32"	7,850	2,500	Steel	Sealed	2°	McMaster-Carr Approved	6494K79	00000	———	0	———	0
1 15/16"	2 1/4"							8 1/8"	2 15/32"	7,850	2,500	Steel	Sealed	2°	McMaster-Carr Approved	6494K81	00000	———	0	———	0
2"	2 1/2"							8 5/8"	2 1/2"	9,750	2,500	Steel	Sealed	2°	McMaster-Carr Approved	6494K82	000000	———	0	———	0
2 3/16"	2 1/2"							8 5/8"	2 1/2"	9,750	2,500	Steel	Sealed	2°	McMaster-Carr Approved	6494K83	000000	———	0	———	0
2 1/4"	2 3/4"							9 1/2"	2 15/16"	11,750	2,000	Steel	Sealed	2°	McMaster-Carr Approved	6494K84	000000	———	0	———	0


2 7/16"	2 3/4"							9 1/2"	2 15/16"	11,750	2,000	Steel	Sealed	2°	McMaster-Carr Approved	6494K85	000000	———	0	———	0
2 1/2"	3"							10 7/16"	2 15/16"	12,850	2,000	Steel	Sealed	2°	McMaster-Carr Approved	6494K86	000000	———	0	———	0
2 3/4"	3 1/8"							10 15/32"	3 5/32"	13,950	2,000	Steel	Sealed	2°	McMaster-Carr Approved	6494K87	000000	———	0	———	0
3"	3 1/4"							10 13/16"	3 13/64"	15,150	2,000	Steel	Sealed	2°	McMaster-Carr Approved	6494K88	000000	———	0	———	0


Polyester Plastic Housing







		Set Screw

		1/2"	1 21/64"							5"	1 1/2"	230	800	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K51	000000	———	0	———	0


		5/8"	1 21/64"							5"	1 1/2"	230	800	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K52	000000	———	0	———	0
		3/4"	1 21/64"							5"	1 1/2"	230	800	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K53	000000	———	0	———	0
		1"	1 13/32"							5 17/32"	1 1/2"	270	700	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K54	000000	———	0	———	0
		1 1/4"	1 11/16"							6 13/32"	1 13/16"	375	650	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K61	000000	———	0	———	0


		Aluminum Housing







										Press Fit

										3/32"	3/8"	1 29/64"	13/64"	95	60,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N101	00000	———	0	———	0


						1/8"	3/8"			1 7/16"	13/64"	120	63,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N1	00000	———	0	———	0
						1/8"	3/8"			1 29/64"	13/64"	115	26,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N11	00000	———	0	———	0
						5/32"	3/8"			1 29/64"	13/64"	65	26,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N12	00000	———	0	———	0
						5/32"	3/8"			1 29/64"	13/64"	65	53,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N102	00000	———	0	———	0
						3/16"	3/8"			1 7/16"	13/64"	240	60,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N2	00000	———	0	———	0
						3/16"	3/8"			1 29/64"	13/64"	230	21,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N13	00000	———	0	———	0
						1/4"	3/8"			1 7/16"	13/64"	200	48,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N3	00000	———	0	———	0
						1/4"	3/8"			1 29/64"	13/64"	195	20,000	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N14	00000	———	0	———	0
						5/16"	3/8"			1 7/16"	13/64"	100	45,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N4	00000	———	0	———	0
						5/16"	3/8"			1 29/64"	13/64"	95	20,000	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N15	00000	———	0	———	0


						3/8"	9/16"			2 1/4"	25/64"	630	31,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N5	00000	———	0	———	0
						3/8"	9/16"			2 9/32"	25/64"	590	16,000	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N16	00000	———	0	———	0
						7/16"	1"			4 1/32"	41/64"	480	2,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N17	00000	———	0	———	0
						7/16"	1"			4 1/32"	41/64"	480	5,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N103	00000	———	0	———	0
						1/2"	3/4"			3 9/32"	41/64"	910	13,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N18	00000	———	0	———	0
						1/2"	3/4"			3 9/32"	41/64"	910	27,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N104	00000	———	0	———	0
						9/16"	1"			4 1/32"	41/64"	480	2,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N19	00000	———	0	———	0
						9/16"	1"			4 1/32"	41/64"	480	5,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N105	00000	———	0	———	0
						5/8"	1"			4 1/32"	41/64"	1,050	10,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N21	00000	———	0	———	0
						5/8"	1"			4 1/32"	41/64"	1,050	21,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N106	00000	———	0	———	0


						3/4"	1"			4 1/32"	41/64"	1,650	17,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N107	00000	———	0	———	0
						3/4"	1"			4 1/32"	41/64"	1,680	8,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N22	00000	———	0	———	0
						7/8"	1 1/4"			5 1/32"	55/64"	2,150	7,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N23	00000	———	0	———	0
						7/8"	1 1/4"			5 1/32"	55/64"	2,150	15,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N108	00000	———	0	———	0
						1"	1 1/4"			5 1/32"	55/64"	2,100	13,600	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N109	00000	———	0	———	0
						1"	1 1/4"			5 1/32"	55/64"	2,120	6,800	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N24	00000	———	0	———	0
						1 1/8"	1 1/4"			5 1/32"	55/64"	2,100	6,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N25	00000	———	0	———	0
						1 1/8"	1 1/4"			5 1/32"	55/64"	2,100	13,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N111	00000	———	0	———	0
						1 1/4"	1 1/4"			5 1/32"	55/64"	2,300	6,000	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N26	00000	———	0	———	0
1 1/4"						1 1/4"	5 1/32"			55/64"	2,300	12,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N112	00000	———	0	———	0


3 mm	3/8"					1 29/64"	13/64"			110	25,000	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N27	00000	———	0	———	0
3 mm	3/8"					1 29/64"	13/64"			110	50,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N113	00000	———	0	———	0
4 mm	3/8"					1 7/16"	13/64"			182	57,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N9	00000	———	0	———	0
4 mm	3/8"					1 29/64"	13/64"			170	24,000	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N28	00000	———	0	———	0
5 mm	3/8"					1 7/16"	13/64"	205		50,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N11	00000	———	0	———	0
5 mm	3/8"					1 29/64"	13/64"	190	21,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N29	00000	———	0	———	0
6 mm	3/8"					1 7/16"	13/64"	135	50,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N12	00000	———	0	———	0
6 mm	3/8"					1 29/64"	13/64"	125	21,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N31	00000	———	0	———	0
7 mm	3/8"					1 29/64"	13/64"	95	20,000	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N32	00000	———	0	———	0
7 mm	3/8"					1 29/64"	13/64"	95	40,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N114	00000	———	0	———	0


8 mm	3/8"					1 7/16"	13/64"	103	46,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N13	00000	———	0	———	0
8 mm	3/8"					1 29/64"	13/64"	95	20,000	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N33	00000	———	0	———	0
9 mm	9/16"					2 9/32"	25/64"	440	17,000	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N34	00000	———	0	———	0
9 mm	9/16"					2 9/32"	25/64"	440	34,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N115	00000	———	0	———	0
10 mm	9/16"	2 1/4"				25/64"	326	34,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N14	00000	———	0	———	0
10 mm	9/16"	2 9/32"	25/64"			300	18,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N35	00000	———	0	———	0
12 mm	3/4"	3 9/32"	41/64"			1,200	11,000	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N36	00000	———	0	———	0
12 mm	3/4"	3 9/32"	41/64"			1,200	22,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N116	00000	———	0	———	0
15 mm	3/4"	3 9/32"	41/64"			1,350	10,000	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N37	00000	———	0	———	0
15 mm	3/4"	3 9/32"	41/64"	1,350		20,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N117	00000	———	0	———	0
17 mm	1"	4 1/32"	41/64"	1,700	8,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N38	00000	———	0	———	0
17 mm	1"	4 1/32"	41/64"	1,700	17,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N118	00000	———	0	———	0
20 mm	1 1/4"	5 1/32"	55/64"	1,650	9,000	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N39	00000	———	0	———	0
20 mm	1 1/4"	5 1/32"	55/64"	1,650	18,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N119	00000	———	0	———	0
25 mm	1 1/4"	5 1/32"	55/64"	1,800	7,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N41	00000	———	0	———	0
25 mm	1 1/4"	5 1/32"	55/64"	1,800	15,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N121	00000	———	0	———	0
30 mm	1 1/4"	5 1/32"	55/64"	2,350	6,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N42	00000	———	0	———	0
30 mm	1 1/4"	5 1/32"	55/64"	2,350	13,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N122	00000	———	0	———	0

Mounted Ball Bearings with Four-Bolt Flange

Smoother than smooth—the balls inside these bearings roll nearly friction-free. The four-bolt flange supports shafts with a stronger connection to the mounting surface than two-bolt alternatives.

Lubricate regularly to keep your bearing in tip-top shape. Bearings with seals keep lubricants in and contaminants out, and come packed with grease. Open bearings require initial lubrication and offer less protection against dust and debris.

Nickel-Plated Cast Iron Housing—Combine the strength of iron with the corrosion resistance of stainless steel at an affordable price point. Nickel-plated iron is also unlikely to chip.

Polyester Plastic Housing—Lightweight and naturally rust-resistant, with a smooth surface that's easy to wipe clean.

Set Screw—Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces.

Locknut—Tighten the nut for a strong hold that stands up to heavy vibrations without letting go. An adapter sleeve is required and sold separately.

SKF—Manufactured in Europe with a strong focus on precision. The more precise the bearing, the more efficiently it will run.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

	Bearings												Required Adapter Sleeves		Replacement Bearings
		Overall
	For Shaft Dia.	Lg.	Wd.	Flange Thk.	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Bearing Material	Bearing Seal Type	Misalignment Capability	Manufacturer		Each		Each		Each
Powder-Coated Cast Iron Housing







				Set Screw

				1/2"	3"	1 9/32"	7/16"	2,150	9,500	Steel	Sealed	2°	SKF	5967K31	000000	———	0	———	0


				5/8"	3"	1 9/32"	7/16"	2,150	9,500	Steel	Sealed	2°	SKF	5967K81	00000	———	0	———	0
				3/4"	3 3/8"	1 15/32"	3/8"	2,850	8,500	Steel	Sealed	2°	SKF	5967K82	00000	———	0	5967K13	000000
				7/8"	3 3/4"	1 39/64"	7/16"	3,100	7,000	Steel	Sealed	2°	SKF	5967K111	00000	———	0	———	0
				15/16"	3 3/4"	1 5/8"	7/16"	3,100	7,000	Steel	Sealed	2°	SKF	5967K241	00000	———	0	———	0
				1"	3 3/4"	1 19/32"	7/16"	3,150	7,000	Steel	Sealed	2°	SKF	5967K84	00000	———	0	5967K15	00000
				1 1/8"	4 1/4"	1 45/64"	5/8"	4,350	6,300	Steel	Sealed	2°	SKF	5967K112	000000	———	0	5967K72	00000
				1 3/16"	4 1/4"	1 41/64"	5/8"	4,350	6,300	Steel	Sealed	2°	SKF	5967K85	00000	———	0	5967K16	00000
				1 1/4"	4 1/4"	1 41/64"	5/8"	4,350	6,300	Steel	Sealed	2°	SKF	5967K41	00000	———	0	5967K17	00000
				1 1/4"	4 5/8"	1 53/64"	1/2"	5,700	5,300	Steel	Sealed	2°	SKF	5967K86	00000	———	0	5967K18	00000
				1 3/8"	4 5/8"	1 29/32"	1/2"	5,700	5,300	Steel	Sealed	2°	SKF	5967K113	000000	———	0	5967K73	00000


				1 7/16"	4 5/8"	1 53/64"	1/2"	5,700	5,300	Steel	Sealed	2°	SKF	5967K87	00000	———	0	5967K19	00000
				1 1/2"	5 1/8"	2 3/16"	21/32"	6,900	4,800	Steel	Sealed	2°	SKF	5967K88	000000	———	0	5967K21	000000
				1 11/16"	5 3/8"	2 7/32"	3/4"	7,450	4,300	Steel	Sealed	2°	SKF	5967K242	000000	———	0	———	0
				1 3/4"	5 3/8"	2 1/64"	23/32"	7,450	4,300	Steel	Sealed	2°	SKF	5967K89	000000	———	0	5967K22	000000
				1 15/16"	5 5/8"	2 27/64"	5/8"	7,850	4,000	Steel	Sealed	2°	SKF	5967K92	000000	———	0	5967K23	000000
				2"	6 3/8"	2 35/64"	11/16"	9,800	3,600	Steel	Sealed	2°	SKF	5967K93	000000	———	0	5967K24	000000
				2 3/16"	6 3/8"	2 19/32"	23/32"	9,800	3,600	Steel	Sealed	2°	SKF	5967K243	000000	———	0	———	0
				2 1/4"	6 7/8"	2 29/32"	11/16"	11,800	3,400	Steel	Sealed	2°	SKF	5967K114	000000	———	0	5967K74	000000
				2 7/16"	6 7/8"	2 29/32"	23/32"	11,800	3,400	Steel	Sealed	2°	SKF	5967K244	000000	———	0	———	0
				2 1/2"	7 3/8"	3 3/16"	7/8"	12,800	3,000	Steel	Sealed	2°	SKF	5967K115	000000	———	0	5967K75	000000


				20 mm	85.7 mm	32.5 mm	11.1 mm	2,600	7,300	Steel	Sealed	2°	Sealmaster	1485N1	000000	———	0	7835T111	000000
				25 mm	95.3 mm	36.5 mm	13.5 mm	2,800	6,300	Steel	Sealed	2°	Sealmaster	1485N2	000000	———	0	7835T112	000000
				30 mm	108 mm	39.7 mm	13.5 mm	4,350	5,400	Steel	Sealed	2°	Sealmaster	1485N3	000000	———	0	7835T113	000000
				35 mm	117.5 mm	44.5 mm	14.3 mm	5,750	4,600	Steel	Sealed	2°	Sealmaster	1485N4	000000	———	0	7835T114	000000
				40 mm	130.2 mm	51.2 mm	14.3 mm	7,300	4,100	Steel	Sealed	2°	Sealmaster	1485N5	000000	———	0	7835T115	000000
				45 mm	136.5 mm	52 mm	14.3 mm	7,900	3,800	Steel	Sealed	2°	Sealmaster	1485N6	000000	———	0	———	0
				50 mm	142.9 mm	54.8 mm	14.3 mm	7,850	3,500	Steel	Sealed	2°	Sealmaster	1485N7	000000	———	0	7835T117	000000
				55 mm	161.9 mm	58.7 mm	20.6 mm	9,750	3,200	Steel	Sealed	2°	Sealmaster	1485N8	000000	———	0	———	0
				60 mm	174.6 mm	68.3 mm	20.6 mm	11,700	3,000	Steel	Sealed	2°	Sealmaster	1485N9	000000	———	0	———	0




						Clamp On

						1"	3 3/4"	1 1/2"	17/32"	2,800	9,000	Steel	Sealed	2°	Sealmaster	3710T51	000000	———	0	———	0


						1 3/16"	4 1/4"	1 5/8"	17/32"	4,350	7,600	Steel	Sealed	2°	Sealmaster	3710T52	000000	———	0	———	0
						1 1/4"	4 5/8"	1 13/16"	9/16"	5,750	6,500	Steel	Sealed	2°	Sealmaster	3710T53	000000	———	0	———	0
						1 3/8"	4 5/8"	1 13/16"	9/16"	5,750	6,500	Steel	Sealed	2°	Sealmaster	3710T54	000000	———	0	———	0
						1 7/16"	4 5/8"	1 13/16"	9/16"	5,750	6,500	Steel	Sealed	2°	Sealmaster	3710T55	000000	———	0	———	0
						1 1/2"	5 1/8"	2 5/64"	9/16"	7,300	5,800	Steel	Sealed	2°	Sealmaster	3710T56	000000	———	0	———	0
						1 15/16"	5 5/8"	2 7/32"	9/16"	7,850	5,000	Steel	Sealed	2°	Sealmaster	3710T57	000000	———	0	———	0




Eccentric Lock

5/8"	3"							1 17/32"	7/16"	2,100	9,500	Steel	Sealed	2°	SKF	4071N41	00000	———	0	———	0


3/4"	3 3/8"							1 11/16"	3/8"	2,850	8,500	Steel	Sealed	2°	SKF	4071N42	00000	———	0	———	0
7/8"	3 3/4"	1 3/4"						7/16"	3,100	7,000	Steel	Sealed	2°	SKF	4071N43	00000	———	0	———	0
1"	3 3/4"	1 3/4"	7/16"					3,100	7,000	Steel	Sealed	2°	SKF	4071N44	00000	———	0	———	0
1 1/8"	4 1/4"	1 7/8"	21/32"					4,350	6,300	Steel	Sealed	2°	SKF	4071N45	00000	———	0	———	0
1 3/16"	4 1/4"	1 7/8"	21/32"					4,350	6,300	Steel	Sealed	2°	SKF	4071N46	00000	———	0	———	0
1 1/4"	4 5/8"	2 1/16"	1/2"					5,700	5,300	Steel	Sealed	2°	SKF	4071N47	00000	———	0	———	0
1 3/8"	4 5/8"	2 1/16"	1/2"					5,700	5,300	Steel	Sealed	2°	SKF	4071N48	00000	———	0	———	0
1 7/16"	4 5/8"	2 1/16"	1/2"					5,700	5,300	Steel	Sealed	2°	SKF	4071N49	00000	———	0	———	0
1 1/2"	5 1/8"	2 5/16"	11/16"					6,900	4,800	Steel	Sealed	2°	SKF	4071N51	000000	———	0	———	0
1 3/4"	5 3/8"	2 5/16"	3/4"					7,450	4,300	Steel	Sealed	2°	SKF	4071N52	000000	———	0	———	0


1 15/16"	5 5/8"	2 7/16"	21/32"					7,850	4,000	Steel	Sealed	2°	SKF	4071N53	000000	———	0	———	0
2"	6 3/8"	2 11/16"	23/32"					9,800	3,600	Steel	Sealed	2°	SKF	4071N54	000000	———	0	———	0
20 mm	86 mm	43 mm	11 mm					2,850	8,500	Steel	Sealed	1.5°	SKF	4071N11	000000	———	0	———	0
25 mm	95 mm	42.5 mm	12 mm					3,100	7,000	Steel	Sealed	1.5°	SKF	4071N12	00000	———	0	———	0
30 mm	108 mm	46.7 mm	13 mm					4,350	6,300	Steel	Sealed	1.5°	SKF	4071N14	000000	———	0	———	0
35 mm	118 mm	50.4 mm	13 mm					5,700	5,300	Steel	Sealed	1.5°	SKF	4071N16	000000	———	0	———	0
40 mm	130 mm	57.2 mm	14 mm					6,900	4,800	Steel	Sealed	1.5°	SKF	4071N17	000000	———	0	———	0
45 mm	137 mm	58.9 mm	14 mm					7,450	4,300	Steel	Sealed	1.5°	SKF	4071N21	000000	———	0	———	0
50 mm	143 mm	60.7 mm	15 mm					7,850	4,000	Steel	Sealed	1.5°	SKF	4071N22	000000	———	0	———	0




		Locknut

		25 mm	108 mm					40.5 mm	13 mm	4,350	6,300	Steel	Sealed	1.5°	SKF	4071N26	000000	7835T147	000000	———	0


		45 mm	143 mm					53.1 mm	15 mm	7,850	4,000	Steel	Sealed	1.5°	SKF	4071N29	000000	7835T156	00000	———	0


		Nickel-Plated Cast Iron Housing







										Set Screw

										1/2"	3 3/8"	1 5/16"	7/16"	2,870	5,500	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K51	00000	———	0	———	0


				5/8"	3 3/8"					1 5/16"	7/16"	2,870	5,500	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K52	00000	———	0	———	0
				3/4"	3 3/8"					1 5/16"	7/16"	2,870	5,800	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K32	00000	———	0	———	0
				7/8"	3 3/4"					1 13/32"	1/2"	3,140	5,000	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K53	00000	———	0	———	0
				1"	3 3/4"					1 13/32"	1/2"	3,140	5,100	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K33	00000	———	0	———	0
				1 1/8"	4 1/4"					1 19/32"	1/2"	4,380	4,000	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K54	00000	———	0	———	0
				1 3/16"	4 1/4"					1 19/32"	1/2"	4,380	4,000	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K55	00000	———	0	———	0
				1 1/4"	4 1/4"					1 19/32"	1/2"	4,380	3,500	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K56	00000	———	0	———	0
				1 1/4"	4 19/32"					1 3/4"	19/32"	5,770	3,700	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K35	00000	———	0	———	0
				1 3/8"	4 19/32"					1 3/4"	19/32"	5,770	3,500	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K57	00000	———	0	———	0
				1 7/16"	4 19/32"					1 3/4"	19/32"	5,770	3,500	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K58	00000	———	0	———	0


				1 1/2"	5 1/8"					2 1/32"	19/32"	6,540	3,000	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K59	00000	———	0	———	0
				1 3/4"	5 13/32"					2 1/16"	5/8"	7,660	3,000	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K61	00000	———	0	———	0
				1 15/16"	5 5/8"	2 5/32"				5/8"	7,890	2,500	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K62	00000	———	0	———	0
				2"	5 5/8"	2 5/32"	5/8"			7,890	2,500	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K63	00000	———	0	———	0
				2 1/2"	7 3/8"	2 3/4"	7/8"			12,850	2,000	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K64	000000	———	0	———	0
				25 mm	95 mm	35.8 mm	13 mm			3,140	5,000	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K65	00000	———	0	———	0
				30 mm	108 mm	40.2 mm	13 mm			4,380	4,000	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K66	00000	———	0	———	0


				Polyester Plastic Housing







										Set Screw

										3/4"	3 3/4"	1 3/8"	35/64"	270	700	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K57	000000	———	0	———	0


										1"	3 3/4"	1 3/8"	35/64"	270	700	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K58	000000	———	0	———	0
										1 1/4"	4 13/64"	1 3/8"	35/64"	370	690	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K71	000000	———	0	———	0

Mounted Ball Bearings with Two-Bolt Flange

Smoother than smooth—the balls inside these bearings roll nearly friction-free. The sturdy housing supports the shaft and secures with a two-bolt flange, the most common type of flanged bearing.

Nickel-Plated Cast Iron Housing—Combine the strength of iron with the corrosion resistance of stainless steel at an affordable price point. Nickel-plated iron is also unlikely to chip.

Polyester Plastic Housing—Lightweight and naturally rust-resistant, with a smooth surface that's easy to wipe clean.

PEEK Housing—PEEK resists harsh chemicals and won’t melt or deform at high temperatures. These housings are highly wear-resistant, but they may crack or dent from hard impacts and vibrations.

Press Fit—For a tight connection to the shaft, install with a press or by heating and then cooling the bearing. Also known as an interference fit.

Set Screw—Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces.

SKF—Manufactured in Europe with a strong focus on precision. The more precise the bearing, the more efficiently it will run.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

	Bearings												Replacement Bearings
		Overall
	For Shaft Dia.	Lg.	Wd.	Flange Thk.	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Bearing Material	Bearing Seal Type	Misalignment Capability	Manufacturer		Each		Each
Powder-Coated Cast Iron Housing







				Set Screw

				1/2"	3 7/8"	1 19/64"	7/16"	2,150	9,500	Steel	Sealed	2°	SKF	5968K71	000000	5967K11	000000


				5/8"	3 7/8"	1 19/64"	7/16"	2,100	9,500	Steel	Sealed	2°	SKF	5968K72	00000	———	0
				3/4"	4 7/16"	1 15/32"	7/16"	2,850	8,500	Steel	Sealed	2°	SKF	5968K73	00000	5967K13	00000
				7/8"	4 7/8"	1 33/64"	17/32"	3,100	7,000	Steel	Sealed	2°	SKF	5968K74	00000	———	0
				15/16"	4 7/8"	1 17/32"	17/32"	3,100	7,000	Steel	Sealed	2°	SKF	5968K111	00000	———	0
				1"	4 7/8"	1 33/64"	17/32"	3,100	7,000	Steel	Sealed	2°	SKF	5968K75	00000	5967K15	00000
				1 1/8"	5 9/16"	1 45/64"	17/32"	4,350	6,300	Steel	Sealed	2°	SKF	5968K92	000000	5967K72	00000
				1 3/16"	5 9/16"	1 21/32"	17/32"	4,350	6,300	Steel	Sealed	2°	SKF	5968K76	00000	5967K16	00000
				1 1/4"	5 9/16"	1 21/32"	17/32"	4,350	6,300	Steel	Sealed	2°	SKF	5968K91	00000	5967K17	00000
				1 1/4"	6 1/8"	1 53/64"	9/16"	5,700	5,300	Steel	Sealed	2°	SKF	5968K77	00000	5967K18	00000
				1 3/8"	6 1/8"	1 29/32"	9/16"	5,700	5,300	Steel	Sealed	2°	SKF	5968K112	000000	———	0


				1 7/16"	6 1/8"	1 53/64"	9/16"	5,700	5,300	Steel	Sealed	2°	SKF	5968K78	00000	5967K19	00000
				1 1/2"	6 3/4"	2 11/64"	9/16"	6,900	4,800	Steel	Sealed	2°	SKF	5968K79	000000	5967K21	000000
				1 11/16"	7 1/16"	2 3/16"	9/16"	7,450	4,300	Steel	Sealed	2°	SKF	5968K113	000000	———	0
				1 3/4"	7 1/16"	2"	9/16"	7,450	4,300	Steel	Sealed	2°	SKF	5968K81	000000	5967K22	000000
				1 15/16"	7 7/16"	2 15/32"	9/16"	7,850	4,000	Steel	Sealed	2°	SKF	5968K84	000000	5967K23	000000
				2"	8 1/2"	2 37/64"	13/16"	9,800	3,600	Steel	Sealed	2°	SKF	5968K83	000000	5967K24	000000
				2 3/16"	8 1/2"	2 5/8"	13/16"	9,800	3,600	Steel	Sealed	2°	SKF	5968K114	000000	———	0
				2 1/4"	9 1/4"	2 29/32"	13/16"	11,800	3,400	Steel	Sealed	2°	SKF	5968K115	000000	———	0
				2 7/16"	9 1/4"	2 29/32"	13/16"	11,800	3,400	Steel	Sealed	2°	SKF	5968K116	000000	———	0
				20 mm	111.9 mm	32.5 mm	11.1 mm	2,600	7,300	Steel	Sealed	2°	Sealmaster	1483N1	000000	7835T111	000000


				25 mm	123.8 mm	36.5 mm	13.5 mm	2,800	6,300	Steel	Sealed	2°	Sealmaster	1483N2	000000	7835T112	000000
				30 mm	141.3 mm	39.7 mm	13.5 mm	4,350	5,400	Steel	Sealed	2°	Sealmaster	1483N3	000000	7835T113	000000
				35 mm	155.6 mm	44.5 mm	14.3 mm	5,750	4,600	Steel	Sealed	2°	Sealmaster	1483N4	000000	7835T114	000000
				40 mm	171.5 mm	51.2 mm	14.3 mm	7,300	4,100	Steel	Sealed	2°	Sealmaster	1483N5	000000	7835T115	000000
				45 mm	179.4 mm	52 mm	14.3 mm	7,900	3,800	Steel	Sealed	2°	Sealmaster	1483N6	000000	———	0
				50 mm	189 mm	60.6 mm	15 mm	7,850	4,000	Steel	Sealed	2°	SKF	1483N211	000000	———	0




						Clamp On

						1"	4 7/8"	1 1/2"	17/32"	2,800	9,000	Steel	Sealed	2°	Sealmaster	3710T41	000000	———	0


						1 1/4"	6 1/8"	1 13/16"	9/16"	5,750	6,500	Steel	Sealed	2°	Sealmaster	3710T43	000000	———	0
						1 3/8"	6 1/8"	1 13/16"	9/16"	5,750	6,500	Steel	Sealed	2°	Sealmaster	3710T44	000000	———	0
						1 7/16"	6 1/8"	1 13/16"	9/16"	5,750	6,500	Steel	Sealed	2°	Sealmaster	3710T45	000000	———	0
						1 1/2"	6 3/4"	2 5/64"	9/16"	7,300	5,800	Steel	Sealed	2°	Sealmaster	3710T46	000000	———	0
						1 15/16"	7 7/16"	2 7/32"	9/16"	7,850	5,000	Steel	Sealed	2°	Sealmaster	3710T47	000000	———	0
						2"	8 1/2"	2 3/8"	13/16"	9,750	3,200	Steel	Sealed	2°	Sealmaster	3710T9	000000	———	0




								Eccentric Lock

								5/8"	3 7/8"	1 17/32"	7/16"	2,100	9,500	Steel	Sealed	2°	SKF	5968K118	00000	———	0


3/4"	4 7/16"							1 43/64"	7/16"	2,850	8,500	Steel	Sealed	2°	SKF	5968K119	00000	———	0
7/8"	4 7/8"							1 43/64"	17/32"	3,100	7,000	Steel	Sealed	2°	SKF	5968K121	00000	———	0
1"	4 7/8"							1 43/64"	17/32"	3,100	7,000	Steel	Sealed	2°	SKF	5968K122	00000	———	0
1 1/8"	5 9/16"	1 7/8"						17/32"	4,350	6,300	Steel	Sealed	2°	SKF	5968K123	00000	———	0
1 3/16"	5 9/16"	1 7/8"	17/32"					4,350	6,300	Steel	Sealed	2°	SKF	5968K124	00000	———	0
1 1/4"	6 1/8"	2 1/16"	9/16"					5,700	5,300	Steel	Sealed	2°	SKF	5968K125	00000	———	0
1 3/8"	6 1/8"	2 1/16"	9/16"					5,700	5,300	Steel	Sealed	2°	SKF	5968K126	00000	———	0
1 7/16"	6 1/8"	2 1/16"	9/16"					5,700	5,300	Steel	Sealed	2°	SKF	5968K127	00000	———	0
1 1/2"	6 3/4"	2 9/32"	9/16"					6,900	4,800	Steel	Sealed	2°	SKF	5968K128	00000	———	0
1 3/4"	7 1/16"	2 9/32"	9/16"					7,450	4,300	Steel	Sealed	2°	SKF	5968K129	000000	———	0


1 15/16"	7 7/16"	2 15/32"	9/16"					7,850	4,000	Steel	Sealed	2°	SKF	5968K131	000000	———	0
2"	8 1/2"	2 23/32"	13/16"					9,800	3,600	Steel	Sealed	2°	SKF	5968K132	000000	———	0
17 mm	98.5 mm	39.1 mm	11 mm					2,100	9,500	Steel	Sealed	2°	SKF	1483N111	000000	———	0
20 mm	112 mm	42.5 mm	11 mm					2,850	8,500	Steel	Sealed	2°	SKF	1483N112	000000	———	0
25 mm	124 mm	42.5 mm	12 mm					3,100	7,000	Steel	Sealed	2°	SKF	1483N113	000000	———	0
30 mm	141.5 mm	46.7 mm	13 mm					4,350	6,300	Steel	Sealed	2°	SKF	1483N115	000000	———	0
30 mm	141.5 mm	50.1 mm	13 mm					4,350	6,300	Steel	Sealed	2°	SKF	1483N116	000000	———	0


Nickel-Plated Cast Iron Housing







								Set Screw

								5/8"	3 55/64"	1 5/16"	7/16"	2,870	5,800	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K38	00000	———	0


								3/4"	4 7/16"	1 5/16"	7/16"	2,870	5,800	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K42	00000	———	0
								1"	5 1/8"	1 13/32"	1/2"	3,140	5,100	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K43	00000	———	0
								1 1/4"	5 13/16"	1 19/32"	1/2"	4,380	4,300	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K45	00000	———	0


								Polyester Plastic Housing







										Set Screw

										1/2"	4 1/2"	1 1/4"	7/16"	235	800	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K4	000000	———	0


										5/8"	4 1/2"	1 1/4"	7/16"	235	800	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K41	000000	———	0
										3/4"	4 1/2"	1 1/4"	7/16"	235	800	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K42	000000	———	0
										3/4"	5 5/32"	1 3/8"	17/32"	270	700	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K55	000000	———	0
										7/8"	5 5/32"	1 3/8"	17/32"	270	700	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K43	000000	———	0
										1"	5 5/32"	1 3/8"	17/32"	270	700	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K56	000000	———	0
										1 1/16"	5 53/64"	1 5/8"	9/16"	380	690	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K44	000000	———	0
						1 1/8"				5 53/64"	1 5/8"	9/16"	380	690	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K45	000000	———	0
						1 1/4"	5 53/64"			1 5/8"	9/16"	380	690	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K47	000000	———	0


						PEEK Housing







												Press Fit

												1/8"	1 5/32"	5/16"	11/64"	125	53,000	440C Stainless Steel	Open	—	McMaster-Carr Approved	4575N21	00000	———	0


												1/8"	1 5/32"	5/16"	11/64"	125	53,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	4575N31	00000	———	0
												3/16"	1 3/8"	3/8"	11/64"	290	38,000	440C Stainless Steel	Open	—	McMaster-Carr Approved	4575N22	00000	———	0
												3/16"	1 3/8"	3/8"	11/64"	290	38,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	4575N32	00000	———	0
												1/4"	1 11/32"	19/64"	11/64"	80	36,000	440C Stainless Steel	Open	—	McMaster-Carr Approved	4575N23	00000	———	0
												1/4"	1 11/32"	19/64"	11/64"	80	36,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	4575N33	00000	———	0
												5/16"	1 1/2"	11/32"	3/16"	120	40,000	440C Stainless Steel	Open	—	McMaster-Carr Approved	4575N24	00000	———	0
												5/16"	1 1/2"	11/32"	3/16"	120	40,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	4575N34	00000	———	0
												3/8"	2 1/8"	31/64"	13/64"	740	32,000	440C Stainless Steel	Open	—	McMaster-Carr Approved	4575N25	00000	———	0
												3/8"	2 1/8"	31/64"	13/64"	740	32,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	4575N35	00000	———	0

Light Duty Mounted Ball Bearings with Two-Bolt Flange

With a two-piece housing made from thin pressed metal, these bearings are a cost-effective option when extreme precision isn't necessary. Less stable than bearings with forged, one-piece housings, they're good for hand-cranked systems, gravity feed conveyor rollers, and other low-speed applications. The balls inside roll nearly friction-free to support smooth shaft rotation. The housing mounts in place with a two-bolt flange, the most common type of flanged bearing.

Lubricate regularly to keep your bearing in tip-top shape. These bearings come packed with grease and sealed to block out dust and contaminants.

Steel Housing—Best for dry environments as moisture will cause them to rust.

303 Stainless Steel Housing and 304 Stainless Steel Housing—Prevent rust from exposure to moisture and mild chemicals, including ammonia-based cleaning solutions.

Press Fit—For a tight connection to the shaft, install with a press or by heating and then cooling the bearing. Also known as an interference fit.

Set Screw—Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

		Overall
	For Shaft Dia.	Lg.	Wd.	Flange Thk.	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Bearing Material	Bearing Seal Type	Misalignment Capability		Each
Steel Housing







				Press Fit

				1/8"	1 3/4"	17/64"	1/16"	65	20,000	Steel	Sealed	5°	4473N11	000000


				3/16"	1 3/4"	17/64"	1/16"	65	20,000	Steel	Sealed	5°	4473N12	00000
				1/4"	1 3/4"	17/64"	1/16"	65	20,000	Steel	Sealed	5°	4473N13	00000
				5/16"	1 3/4"	17/64"	1/16"	65	20,000	Steel	Sealed	5°	4473N14	00000
				4 mm	45.2 mm	6.8 mm	1.5 mm	65	20,000	Steel	Sealed	5°	4473N15	00000
				5 mm	45.2 mm	6.8 mm	1.5 mm	65	20,000	Steel	Sealed	5°	4473N16	00000
				6 mm	45.2 mm	6.8 mm	1.5 mm	65	20,000	Steel	Sealed	5°	4473N17	00000
				8 mm	45.2 mm	6.8 mm	1.5 mm	65	20,000	Steel	Sealed	5°	4473N18	00000
				10 mm	53 mm	9.6 mm	2.2 mm	380	18,500	Steel	Sealed	5°	4473N19	00000




						Set Screw

						3/8"	2 1/2"	11/16"	1/32"	580	3,000	Steel	Sealed	—	7208K51	00000


						1/2"	3 3/16"	29/32"	5/32"	2,100	5,800	Steel	Sealed	3°	5913K71	00000
						1/2"	3 3/4"	1"	1/16"	1,600	3,000	Steel	Sealed	—	7208K52	00000
						5/8"	3 3/16"	29/32"	5/32"	2,100	5,800	Steel	Sealed	3°	5913K72	00000
						5/8"	3 3/4"	1"	1/16"	1,600	3,000	Steel	Sealed	—	7208K53	00000
						3/4"	3 17/32"	1 1/64"	5/32"	2,850	5,800	Steel	Sealed	3°	5913K73	00000
						3/4"	4 1/8"	1 1/8"	1/16"	1,850	3,000	Steel	Sealed	—	7208K54	00000
						7/8"	3 3/4"	1 1/8"	5/32"	3,100	5,100	Steel	Sealed	3°	5913K31	00000
						1"	3 3/4"	1 1/8"	5/32"	3,100	5,100	Steel	Sealed	3°	5913K74	00000
						1"	4 1/8"	1 1/8"	1/16"	1,850	3,000	Steel	Sealed	—	7208K55	00000
						1 1/8"	4 7/16"	1 15/64"	5/32"	4,350	4,300	Steel	Sealed	3°	5913K32	00000


						1 3/16"	4 7/16"	1 15/64"	13/64"	4,350	4,300	Steel	Sealed	3°	5913K75	00000
						1 1/4"	4 7/16"	1 15/64"	5/32"	4,350	4,300	Steel	Sealed	3°	5913K33	00000
						1 3/8"	4 13/16"	1 23/64"	5/32"	5,750	3,700	Steel	Sealed	3°	5913K34	00000


						303 Stainless Steel Housing







										Press Fit

										1/8"	1 3/4"	17/64"	1/16"	50	20,000	304 Stainless Steel	Sealed	5°	4461N11	00000


										3/16"	1 3/4"	17/64"	1/16"	50	20,000	304 Stainless Steel	Sealed	5°	4461N12	00000
										1/4"	1 3/4"	17/64"	1/16"	50	20,000	304 Stainless Steel	Sealed	5°	4461N13	00000
										5/16"	1 3/4"	17/64"	1/16"	50	20,000	304 Stainless Steel	Sealed	5°	4461N14	00000
										3/8"	2 3/32"	3/8"	3/32"	320	18,500	304 Stainless Steel	Sealed	5°	4461N15	00000
										4 mm	45.2 mm	6.8 mm	1.5 mm	50	20,000	304 Stainless Steel	Sealed	5°	4461N16	00000
5 mm										45.2 mm	6.8 mm	1.5 mm	50	20,000	304 Stainless Steel	Sealed	5°	4461N17	00000
6 mm	45.2 mm									6.8 mm	1.5 mm	50	20,000	304 Stainless Steel	Sealed	5°	4461N18	00000
8 mm	45.2 mm									6.8 mm	1.5 mm	50	20,000	304 Stainless Steel	Sealed	5°	4461N19	00000
10 mm	53 mm									9.6 mm	2.2 mm	320	18,500	304 Stainless Steel	Sealed	5°	4461N21	00000


304 Stainless Steel Housing







										Set Screw

										5/8"	3 3/16"	1 5/64"	5/32"	1,800	5,800	440C Stainless Steel	Sealed	3°	2431K71	00000


										3/4"	3 9/16"	1 7/32"	5/32"	2,450	5,800	440C Stainless Steel	Sealed	3°	2431K72	00000
										7/8"	3 3/4"	1 11/32"	5/32"	2,650	5,100	440C Stainless Steel	Sealed	3°	2431K81	00000
										1"	3 3/4"	1 11/32"	5/32"	2,650	5,100	440C Stainless Steel	Sealed	3°	2431K73	00000

Light Duty Mounted Ball Bearings

With a two-piece housing made from thin pressed metal, these bearings are a cost-effective option when extreme precision isn't necessary. Less stable than bearings with forged, one-piece housings, they're good for hand-cranked systems, gravity feed conveyor rollers, and other low-speed applications. Inside, the balls roll nearly friction-free to support smooth rotation.

Lubricate regularly to keep your bearing in tip-top shape. These bearings come packed with grease and sealed to block out dust and contaminants.

Steel Housing—Best for dry environments as moisture will cause them to rust.

304 Stainless Steel Housing—Prevent rust from exposure to moisture and mild chemicals, including ammonia-based cleaning solutions.

Set Screw—Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

			Overall
	For Shaft Dia.	Ctr. Ht.	Lg.	Wd.	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Bearing Material	Bearing Seal Type	Misalignment Capability		Each
Steel Housing







				Set Screw

				1/2"	7/8"	3 3/8"	1 1/8"	2,140	5,800	Steel	Sealed	3°	5913K61	000000


				5/8"	7/8"	3 3/8"	1 1/8"	2,140	5,800	Steel	Sealed	3°	5913K62	00000
				3/4"	1"	3 27/32"	1 21/64"	2,870	5,800	Steel	Sealed	3°	5913K63	00000
				7/8"	1 1/8"	4 1/4"	1 25/64"	3,140	5,100	Steel	Sealed	3°	5913K76	00000
				15/16"	1 1/8"	4 1/4"	1 1/4"	3,100	5,000	Steel	Sealed	3°	5913K101	00000
				1"	1 1/8"	4 1/4"	1 25/64"	3,140	5,100	Steel	Sealed	3°	5913K64	00000
				1 1/8"	1 5/16"	4 19/32"	1 39/64"	4,380	4,300	Steel	Sealed	3°	5913K77	00000
				1 3/16"	1 5/16"	4 29/32"	1 1/2"	4,380	4,300	Steel	Sealed	3°	5913K65	00000
				1 1/4"	1 15/16"	4 19/32"	1 1/2"	4,300	4,000	Steel	Sealed	3°	5913K102	00000
				1 3/8"	1 9/16"	5 3/4"	1 39/64"	5,770	3,700	Steel	Sealed	3°	5913K78	00000




						Eccentric Lock

						1/2"	7/8"	3 3/8"	31/32"	2,100	5,500	Steel	Sealed	3°	5913K103	00000


						5/8"	7/8"	3 3/8"	31/32"	2,100	5,500	Steel	Sealed	3°	5913K104	00000
						3/4"	1"	3 27/32"	1 1/4"	2,850	5,500	Steel	Sealed	3°	5913K105	00000
						7/8"	1 1/8"	4 1/4"	1 1/4"	3,100	5,000	Steel	Sealed	3°	5913K106	00000
						15/16"	1 1/8"	4 1/4"	1 1/4"	3,100	5,000	Steel	Sealed	3°	5913K107	00000
						1"	1 1/8"	4 1/4"	1 1/4"	3,100	5,000	Steel	Sealed	3°	5913K108	00000
						1 1/8"	1 15/16"	4 19/32"	1 1/2"	4,300	4,000	Steel	Sealed	3°	5913K109	00000
						1 3/16"	1 15/16"	4 19/32"	1 1/2"	4,300	4,000	Steel	Sealed	3°	5913K111	00000
						1 1/4"	1 15/16"	4 19/32"	1 1/2"	4,300	4,000	Steel	Sealed	3°	5913K112	00000


						304 Stainless Steel Housing







										Set Screw

										5/8"	7/8"	3 5/8"	1 1/8"	1,830	5,800	440C Stainless Steel	Sealed	3°	2353K31	00000


										3/4"	1"	4 1/8"	1 1/4"	2,450	5,800	440C Stainless Steel	Sealed	3°	2353K32	00000
										1"	1 1/8"	4 1/2"	1 3/8"	2,670	5,100	440C Stainless Steel	Sealed	3°	2353K33	00000
										1 3/16"	1 5/16"	4 7/8"	1 1/2"	3,700	4,300	440C Stainless Steel	Sealed	3°	2353K34	00000

Mounted Tapered-Roller Bearings

Support heavier loads than mounted ball or needle-roller bearings, but at lower speeds. These bearings also withstand thrust loads, which are forces acting parallel to the shaft. The sturdy housing bolts down to support shafts as they turn.

Lubricate your bearings regularly to keep them in tip-top shape. These bearings come packed with grease and sealed to block out dust and contaminants.

Set Screw—Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces.

			Overall		Dynamic Load Cap., lb.
	For Shaft Dia.	Ctr. Ht.	Lg.	Wd.	Radial	Thrust	Max. Rotation Speed, rpm	Bearing Material	Bearing Seal Type		Each
Powder-Coated Cast Iron Housing







				Set Screw

				1 1/4"	1 1/2"	6"	2 3/4"	3,800	2,000	4,400	Steel	Sealed	1495N11	0000000


				1 3/8"	1 7/8"	7 3/8"	3"	6,100	2,550	3,800	Steel	Sealed	1495N12	000000
				1 1/2"	2 1/8"	7 7/8"	3 3/8"	7,850	2,550	3,300	Steel	Sealed	1495N13	000000
				1 5/8"	2 1/8"	7 7/8"	3 3/8"	7,850	2,550	3,300	Steel	Sealed	1495N14	000000
				1 3/4"	2 1/4"	8 7/8"	3 1/2"	10,300	2,550	3,000	Steel	Sealed	1495N15	000000
				Mounted Sealed Tapered-Roller Bearing for 1-3/4" Shaft Diameter Product Detail QuantityEachIn stock Select a compatible file type: Parasolid Compatible Products for This Mounted Bearing
				2"	2 1/4"	8 7/8"	3 1/2"	10,300	2,550	3,000	Steel	Sealed	1495N17	000000
				2 1/4"	2 3/4"	10 1/2"	4"	11,600	3,450	2,400	Steel	Sealed	1495N18	000000
				2 1/2"	2 3/4"	10 1/2"	4"	11,600	3,450	2,400	Steel	Sealed	1495N19	000000
				2 3/4"	3 1/8"	12"	4 1/2"	12,300	5,150	2,000	Steel	Sealed	1495N21	00000000
				3"	3 1/8"	12"	4 1/2"	12,300	5,150	2,000	Steel	Sealed	1495N22	00000000
				3 1/2"	3 3/4"	14"	5"	19,600	5,150	1,600	Steel	Sealed	1495N23	00000000


				4"	4 1/4"	15 1/4"	6 1/4"	26,900	6,900	1,500	Steel	Sealed	1495N24	00000000
				35 mm	1 7/8"	7 3/8"	3"	6,100	2,550	3,800	Steel	Sealed	1495N25	000000
				40 mm	2 1/8"	7 7/8"	3 3/8"	7,850	2,550	3,300	Steel	Sealed	1495N26	000000
				50 mm	2 1/4"	8 7/8"	3 1/2"	10,300	2,550	3,000	Steel	Sealed	1495N28	000000