Filter by
Attachment Type
Diameter
Wire Rope Construction
Application
Material
Required Installation Tool
Thread Size
Weight Capacity
Length
End-to-Eye Length
Sleeve Diameter
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Thread Length
Clevis-End Plug-Lock Wire Rope End Fittings—For Lifting
 |  |
Fray the end of the wire rope with a marlin spike and screw the socket over the plug to install. An inspection hole confirms proper installation—If wire strands are visible, the fitting has been properly secured.
Use an assembly kit (not included) to support the wire rope while you drive the plug into the wire rope end.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Zinc-Plated Steel—Zinc-plated steel fittings have mild corrosion resistance.
316 Stainless Steel—316 stainless steel fittings are the most corrosion resistant fittings we offer. They have excellent resistance to salt water and chemicals.
For Wire Rope | Steel | Zinc-Plated Steel | 316 Stainless Steel | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Construction | End-to-End Lg. | Clevis Inside Wd. | Sleeve Dia. | Pin Dia. | Wt. Cap., lb. | Specs. Met | Each | Each | Each | ||||
| 3/64" to 1/16" | 6 × 19 Fiber Core 6 × 19 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/16" | 3/16" | 1/2" | 3/16" | 90 | ASME B30.26 ASME B30.9 | 3473T51 | 000000 | 3473T61 | 000000 | 3473T71 | 000000 | |
| 5/64" to 3/32" | 6 × 19 Fiber Core 6 × 19 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/2" | 1/4" | 5/8" | 1/4" | 100 | ASME B30.26 ASME B30.9 | 3473T52 | 00000 | 3473T62 | 00000 | 3473T72 | 00000 | |
| 1/8" | 6 × 19 Fiber Core 6 × 19 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/2" | 1/4" | 5/8" | 1/4" | 300 | ASME B30.26 ASME B30.9 | 3473T53 | 00000 | 3473T63 | 00000 | 3473T73 | 00000 | |
| 3/16" | 6 × 19 Fiber Core 6 × 19 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/8" | 5/16" | 3/4" | 5/16" | 700 | ASME B30.26 ASME B30.9 | 3473T181 | 00000 | 3473T381 | 00000 | 3473T122 | 00000 | |
| 1/4" | 6 × 19 Fiber Core 6 × 19 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 3/4" | 3/8" | 15/16" | 3/8" | 1,300 | ASME B30.26 ASME B30.9 | 3473T211 | 00000 | 3473T411 | 00000 | 3473T132 | 00000 | |
| 3/8" | 6 × 19 Fiber Core 6 × 19 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 13/16" | 7/16" | 1 3/16" | 1/2" | 3,000 | ASME B30.26 ASME B30.9 | 3473T241 | 00000 | 3473T441 | 00000 | 3473T852 | 000000 | |
Stud-End Plug-Lock Wire Rope End Fittings—For Lifting
 |  |
Fray the end of the wire rope with a marlin spike and screw the socket over the plug to install. An inspection hole confirms proper installation—If wire strands are visible, the fitting has been properly secured.
Use an assembly kit (not included) to support the wire rope while you drive the plug into the wire rope end.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Never exceed load capacity. Do not use with coated rope unless the coating is removed.
Zinc-Plated Steel—Zinc-plated steel fittings have mild corrosion resistance.
316 Stainless Steel—316 stainless steel fittings are the most corrosion resistant fittings we offer. They have excellent resistance to salt water and chemicals.
For Wire Rope | Thread | Steel | Zinc-Plated Steel | 316 Stainless Steel | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Construction | Overall Lg. | Size | Lg. | Sleeve Dia. | Wt. Cap., lb. | Specs. Met | Each | Each | Each | ||||
| 3/64" to 1/16" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/16" | 10-32 | 1 9/16" | 1/2" | 90 | ASME B30.26 ASME B30.9 | 3475T15 | 000000 | 3475T16 | 000000 | 3475T14 | 000000 | |
| 5/64" to 3/32" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/2" | 1/4"-28 | 1 7/8" | 9/16" | 100 | ASME B30.26 ASME B30.9 | 3475T52 | 00000 | 3475T62 | 00000 | 3475T28 | 00000 | |
| 1/8" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/2" | 1/4"-28 | 1 7/8" | 9/16" | 300 | ASME B30.26 ASME B30.9 | 3475T53 | 00000 | 3475T63 | 00000 | 3475T29 | 00000 | |
| 1/8" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 1/8" | 1/4"-20 | 2 1/2" | 5/8" | 300 | ASME B30.26 ASME B30.9 | 3475T885 | 00000 | 3475T892 | 00000 | 3475T898 | 00000 | |
| 3/16" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 3/16" | 3/8"-24 | 2 3/16" | 3/4" | 700 | ASME B30.26 ASME B30.9 | 3475T181 | 00000 | 3475T351 | 00000 | 3475T742 | 00000 | |
| 3/16" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 6 5/16" | 3/8"-16 | 4 1/8" | 3/4" | 700 | ASME B30.26 ASME B30.9 | 3475T886 | 00000 | 3475T893 | 00000 | 3475T899 | 00000 | |
| 1/4" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 7 1/16" | 1/2"-20 | 4 9/16" | 7/8" | 1,300 | ASME B30.26 ASME B30.9 | 3475T211 | 00000 | 3475T371 | 00000 | 3475T852 | 00000 | |
| 1/4" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 8" | 1/2"-13 | 5" | 1" | 1,300 | ASME B30.26 ASME B30.9 | 3475T887 | 00000 | 3475T894 | 00000 | 3475T901 | 00000 | |
| 3/8" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 8 3/16" | 3/4"-16 | 4 15/16" | 1 1/8" | 3,000 | ASME B30.26 ASME B30.9 | 3475T241 | 00000 | 3475T411 | 00000 | 3475T872 | 000000 | |
| 3/8" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 8 1/4" | 5/8"-11 | 4 1/2" | 1 1/8" | 3,000 | ASME B30.26 ASME B30.9 | 3475T889 | 00000 | 3475T895 | 00000 | 3475T902 | 000000 | |
| 1/2" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 10 15/16" | 3/4"-10 | 6 3/8" | 1 1/2" | 5,300 | ASME B30.26 ASME B30.9 | 3475T904 | 00000 | 3475T896 | 00000 | 3475T903 | 000000 | |
| 1/2" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 11" | 7/8"-14 | 6 15/16" | 1 7/16" | 5,300 | ASME B30.26 ASME B30.9 | 3475T261 | 00000 | 3475T431 | 00000 | 3475T882 | 000000 | |
Ball-with-Shank-End Roller Swage Wire Rope End Fittings—Not for Lifting
 |
Also known as socket-end swage fittings, install these end fittings with a roller swage press for a strong, permanent hold. They have a thicker shank wall than compression-grip end fittings. Made of 18-8 stainless steel, these fittings have excellent corrosion resistance to chemicals.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Fittings | Dies | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Wire Rope | Ball | |||||||||||||
Dia. | Construction | Lg. | Shank Dia. | Lg. | Dia. | Wt. Cap., lb. | Mil. Spec. | Each | Pkg. Qty. | Pkg. | ||||
18-8 Stainless Steel | ||||||||||||||
| 3/64" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 Strand Core | 9/32" | 1/8" | 1/8" | 7/32" | 50 | — | 3869T68 | 00000 | — | ——— | 0 | ||
| 1/16" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 9/32" | 1/8" | 1/8" | 7/32" | 90 | MS20664 | 3869T61 | 0000 | 2 | 3429T23 | 000000000 | ||
| 3/32" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3/8" | 11/64" | 1/8" | 9/32" | 100 | MS20664 | 3869T62 | 0000 | 2 | 3429T24 | 00000000 | ||
| 1/8" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1/2" | 7/32" | 3/16" | 11/32" | 400 | MS20664 | 3869T63 | 0000 | 2 | 3429T25 | 00000000 | ||
| 5/32" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 5/8" | 17/64" | 1/4" | 7/16" | 500 | MS20664 | 3869T64 | 0000 | 2 | 3429T26 | 00000000 | ||
| 3/16" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 23/32" | 19/64" | 1/4" | 1/2" | 800 | MS20664 | 3869T65 | 0000 | 2 | 3429T27 | 00000000 | ||
| 7/32" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 27/32" | 23/64" | 5/16" | 9/16" | 1,260 | MS20664 | 3869T69 | 00000 | — | ——— | 0 | ||
| 1/4" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 31/32" | 13/32" | 5/16" | 5/8" | 1,400 | MS20664 | 3869T67 | 00000 | 2 | 3429T29 | 00000000 | ||
Eye-End Roller Swage Wire Rope End Fittings—Not for Lifting
 |
Also known as socket-end swage fittings, install these end fittings with a roller swage press for a strong, permanent hold. They have a thicker shank wall than compression-grip end fittings. Made of stainless steel, they offer excellent corrosion resistance to chemicals.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
316 Stainless Steel—316 stainless steel fittings are the most corrosion resistant fittings we offer. They have excellent resistance to salt water and chemicals.
Fittings | Dies | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Wire Rope | Eye | |||||||||||||
Dia. | Construction | End-to-Eye Lg. | ID | Thk. | Shank Dia. | Wt. Cap., lb. | Mil. Spec. | Each | Pkg. Qty. | Pkg. | ||||
18-8 Stainless Steel | ||||||||||||||
| 1/16" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1 5/8" | 3/16" | 1/16" | 3/16" | 90 | MS20668 | 3872T11 | 00000 | 2 | 3429T11 | 0000000 | ||
| 3/32" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/16" | 3/16" | 1/8" | 3/16" | 100 | MS20668 | 3872T12 | 0000 | 2 | 3429T12 | 000000 | ||
| 1/8" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 5/16" | 3/16" | 3/16" | 1/4" | 400 | MS20668 | 3872T13 | 00000 | 2 | 3429T13 | 000000 | ||
| 5/32" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 11/16" | 1/4" | 3/16" | 5/16" | 500 | MS20668 | 3872T14 | 00000 | 2 | 3429T14 | 000000 | ||
| 3/16" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 3" | 5/16" | 1/4" | 3/8" | 800 | MS20668 | 3872T15 | 00000 | 2 | 3429T15 | 000000 | ||
| 7/32" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 Strand Core 19 × 7 Strand Core | 3 3/8" | 5/16" | 9/32" | 27/64" | 1,120 | MS20668 | 3872T16 | 00000 | — | ——— | 0 | ||
| 1/4" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 3 3/4" | 3/8" | 5/16" | 1/2" | 1,400 | MS20668 | 3872T17 | 00000 | 2 | 3429T17 | 000000 | ||
316 Stainless Steel | ||||||||||||||
| 1/16" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 Strand Core 19 × 7 Strand Core | 1 1/2" | 1/4" | 7/32" | 5/32" | 90 | — | 3872T21 | 0000 | — | ——— | 0 | ||
| 3/32" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 Strand Core 19 × 7 Strand Core | 1 9/16" | 1/4" | 7/32" | 7/32" | 180 | — | 3872T22 | 00000 | — | ——— | 0 | ||
| 1/8" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 Strand Core 19 × 7 Strand Core | 2 3/32" | 1/4" | 7/32" | 1/4" | 400 | — | 3872T23 | 00000 | — | ——— | 0 | ||
| 5/32" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 Strand Core 19 × 7 Strand Core | 2 11/32" | 5/16" | 9/32" | 19/64" | 560 | — | 3872T24 | 00000 | — | ——— | 0 | ||
| 3/16" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 Strand Core 19 × 7 Strand Core | 2 3/4" | 3/8" | 23/64" | 23/64" | 840 | — | 3872T25 | 00000 | — | ——— | 0 | ||
| 7/32" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 Strand Core 19 × 7 Strand Core | 3 7/32" | 7/16" | 13/32" | 27/64" | 1,120 | — | 3872T26 | 00000 | — | ——— | 0 | ||
| 1/4" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 Strand Core 19 × 7 Strand Core | 3 5/8" | 1/2" | 15/32" | 1/2" | 1,400 | — | 3872T27 | 00000 | — | ——— | 0 | ||
Eye-End Plug-Lock Wire Rope End Fittings—For Lifting
 |  |
Fray the end of the wire rope with a marlin spike and screw the socket over the plug to install. An inspection hole confirms proper installation—If wire strands are visible, the fitting has been properly secured.
Use an assembly kit (not included) to support the wire rope while you drive the plug into the wire rope end.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Zinc-Plated Steel—Zinc-plated steel fittings have mild corrosion resistance.
316 Stainless Steel—316 stainless steel fittings are the most corrosion resistant fittings we offer. They have excellent resistance to salt water and chemicals.
For Wire Rope | Eye | Steel | Zinc-Plated Steel | 316 Stainless Steel | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Construction | End-to-Eye Lg. | ID | Thk. | Sleeve Dia. | Wt. Cap., lb. | Specs. Met | Each | Each | Each | ||||
| 3/64" to 1/16" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 36 Fiber Core 6 × 36 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1 25/32" | 3/16" | 3/16" | 1/2" | 90 | ASME B30.26 ASME B30.9 | 3474T31 | 000000 | 3474T61 | 000000 | 3474T41 | 000000 | |
| 5/64" to 3/32" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 36 Fiber Core 6 × 36 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/8" | 1/4" | 1/4" | 5/8" | 100 | ASME B30.26 ASME B30.9 | 3474T32 | 00000 | 3474T62 | 00000 | 3474T42 | 00000 | |
| 1/8" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 36 Fiber Core 6 × 36 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/8" | 1/4" | 1/4" | 5/8" | 300 | ASME B30.26 ASME B30.9 | 3474T33 | 00000 | 3474T63 | 00000 | 3474T43 | 00000 | |
| 3/16" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 36 Fiber Core 6 × 36 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 19/32" | 5/16" | 5/16" | 3/4" | 600 | ASME B30.26 ASME B30.9 | 3474T181 | 00000 | 3474T652 | 00000 | 3474T452 | 00000 | |
| 1/4" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 36 Fiber Core 6 × 36 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/4" | 3/8" | 3/8" | 15/16" | 1,100 | ASME B30.26 ASME B30.9 | 3474T211 | 00000 | 3474T662 | 00000 | 3474T462 | 00000 | |
| 3/8" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 36 Fiber Core 6 × 36 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 7/32" | 1/2" | 7/16" | 1 3/16" | 2,600 | ASME B30.26 ASME B30.9 | 3474T241 | 00000 | 3474T682 | 00000 | 3474T482 | 000000 | |
Mounting-Plate-End Sleeve-Grip Wire Rope End Fittings—Not for Lifting
 |  |
Create a wire rope railing, perimeter, or barrier. To install, mount the fitting to a wall or post, then unscrew the fitting, slide over the wire rope, and tighten the pieces together with a wrench. The plate has swivel ends. Made of 316 stainless steel, these are the most corrosion resistant fittings we offer.
Warning: Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For Wire Rope | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Construction | Overall Lg. | Sleeve Dia. | Max. Pivot Angle | No. of Mounting Holes | For Screw Size | Mounting Fasteners Included | Rope Cap. Adjustment Factor | Each | |||
316 Stainless Steel | ||||||||||||
Swiveling End | ||||||||||||
| 5/32" | 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/4" | 13/32" | 45° | 3 | No. 8 | Yes | 80% | 9161T2 | 000000 | ||
Stud-End Roller Swage Wire Rope End Fittings—Not for Lifting
 |
Also known as socket-end swage fittings, install these end fittings with a roller swage press for a strong, per manent hold. They have a thicker shank wall than compression-grip end fittings. Made of 18-8 stainless steel, they offer excellent corrosion resistance to chemicals.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Fittings | Dies | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Wire Rope | Thread | |||||||||||||
Dia. | Construction | Overall Lg. | Size | Lg. | Shank Dia. | Wt. Cap., lb. | Mil. Spec. | Each | Pkg. Qty. | Pkg. | ||||
18-8 Stainless Steel | ||||||||||||||
| 1/16" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/2" | 6-32 | 1 1/16" | 3/16" | 90 | — | 3870T34 | 00000 | 2 | 3429T11 | 0000000 | ||
| 1/16" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/2" | 6-40 | 1 1/16" | 3/16" | 90 | MS21259 | 3870T21 | 0000 | 2 | 3429T11 | 000000 | ||
| 3/32" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 7/8" | 10-24 | 1 1/4" | 7/32" | 100 | — | 3870T28 | 0000 | 2 | 3429T12 | 000000 | ||
| 3/32" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 15/16" | 10-32 | 1 1/4" | 1/4" | 100 | MS21259 | 3870T22 | 0000 | 2 | 3429T12 | 000000 | ||
| 1/8" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 5/16" | 1/4"-20 | 1 3/8" | 1/4" | 400 | — | 3870T29 | 00000 | 2 | 3429T13 | 000000 | ||
| 1/8" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 3/8" | 1/4"-28 | 1 7/16" | 1/4" | 400 | MS21259 | 3870T23 | 00000 | 2 | 3429T13 | 000000 | ||
| 5/32" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 5/8" | 1/4"-20 | 1 3/8" | 5/16" | 500 | — | 3870T31 | 00000 | 2 | 3429T14 | 000000 | ||
| 5/32" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 11/16" | 1/4"-28 | 1 7/16" | 5/16" | 500 | MS21259 | 3870T27 | 00000 | 2 | 3429T14 | 000000 | ||
| 3/16" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC | 4" | 5/16"-18 | 1 1/2" | 3/8" | 800 | — | 3870T32 | 00000 | 2 | 3429T15 | 000000 | ||
| 3/16" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC | 4 1/16" | 5/16"-24 | 1 1/2" | 3/8" | 800 | MS21259 | 3870T25 | 00000 | 2 | 3429T15 | 000000 | ||
| 1/4" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC | 4 15/16" | 3/8"-16 | 1 3/4" | 1/2" | 1,400 | — | 3870T33 | 00000 | 2 | 3429T17 | 000000 | ||
| 1/4" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC | 4 15/16" | 3/8"-24 | 1 3/4" | 1/2" | 1,400 | MS21259 | 3870T26 | 00000 | 2 | 3429T17 | 000000 | ||
Stud-End Sleeve-Grip Wire Rope End Fittings—Not for Lifting
 |  |
To install, unscrew the fitting, slide over the wire rope, then tighten the pieces together with a wrench. Use for light-duty securing, tethering, and suspending. Made of 316 stainless steel, these are the most corrosion resistant fittings we offer.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For Wire Rope | Thread | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Construction | Overall Lg. | Size | Lg. | Sleeve Dia. | Wt. Cap. | Each | |||
316 Stainless Steel | ||||||||||
| 1/8" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/4" | 1/4"-28 | 1 27/32" | 17/32" | Not Rated | 1591N11 | 000000 | ||
| 5/32" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 6 5/8" | 1/4"-28 | 1 27/32" | 5/8" | Not Rated | 1591N12 | 00000 | ||
| 3/16" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 3/8" | 5/16"-24 | 2 1/4" | 23/32" | Not Rated | 1591N13 | 00000 | ||
| 1/4" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 5 1/32" | 3/8"-24 | 2 15/32" | 27/32" | Not Rated | 1591N14 | 00000 | ||
| 5/16" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 6 3/8" | 1/2"-20 | 3 5/32" | 1 1/16" | Not Rated | 1591N15 | 000000 | ||
| 3/8" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 7 13/32" | 5/8"-18 | 3 15/16" | 1 3/16" | Not Rated | 1591N16 | 000000 | ||
Clevis-End Roller Swage Wire Rope End Fittings—Not for Lifting
 |
Also known as socket-end swage fittings, install these end fittings with a roller swage press for a strong, permanent hold. They have a thicker shank wall than compression-grip end fittings. Made of 18-8 stainless steel, they offer excellent corrosion resistance to chemicals.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Fittings | Dies | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Wire Rope | ||||||||||||||
Dia. | Construction | End-to-Eye Lg. | Clevis Inside Wd. | Shank Dia. | Wt. Cap., lb. | For Pin Dia. | Mil. Spec. | Each | Pkg. Qty. | Pkg. | ||||
18-8 Stainless Steel | ||||||||||||||
| 1/16" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1 5/8" | 1/8" | 3/16" | 90 | 3/16" | MS20667 | 3865T12 | 000000 | 2 | 3429T11 | 0000000 | ||
| 3/32" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2" | 1/8" | 1/4" | 100 | 3/16" | MS20667 | 3865T13 | 00000 | 2 | 3429T12 | 000000 | ||
| 1/8" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 3/8" | 1/4" | 1/4" | 400 | 3/16" | MS20667 | 3865T14 | 00000 | 2 | 3429T13 | 000000 | ||
| 5/32" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 11/16" | 1/4" | 5/16" | 500 | 1/4" | MS20667 | 3865T15 | 00000 | 2 | 3429T14 | 000000 | ||
| 3/16" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC | 3 1/8" | 5/16" | 3/8" | 800 | 5/16" | MS20667 | 3865T16 | 00000 | 2 | 3429T15 | 000000 | ||
| 1/4" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC | 3 13/16" | 5/16" | 1/2" | 1,400 | 3/8" | MS20667 | 3865T18 | 00000 | 2 | 3429T17 | 000000 | ||
Eye-End Sleeve-Grip Wire Rope End Fittings—Not for Lifting
 |  |
To install, unscrew the fitting, slide over the wire rope, then tighten the pieces together with a wrench. Use for light-duty securing, tethering, and suspending. Made of 316 stainless steel, these are the most corrosion resistant fittings we offer.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For Wire Rope | Eye | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Construction | End-to-Eye Lg. | ID | Thk. | Sleeve Dia. | Wt. Cap. | Each | |||
316 Stainless Steel | ||||||||||
| 1/8" | 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1 7/8" | 1/4" | 15/64" | 9/16" | Not Rated | 35215T11 | 000000 | ||
| 5/32" | 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 9/32" | 3/8" | 9/32" | 5/8" | Not Rated | 35215T21 | 00000 | ||
| 3/16" | 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 21/32" | 7/16" | 5/16" | 3/4" | Not Rated | 35215T22 | 00000 | ||
| 1/4" | 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/8" | 1/2" | 23/64" | 27/32" | Not Rated | 35215T23 | 00000 | ||
| 5/16" | 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 25/32" | 9/16" | 27/64" | 1 1/16" | Not Rated | 35215T24 | 000000 | ||
| 3/8" | 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 7/16" | 11/16" | 33/64" | 1 3/16" | Not Rated | 35215T25 | 000000 | ||
Clevis-End Sleeve-Grip Wire Rope End Fittings—Not for Lifting
 |  |
For Wire Rope | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Construction | End-to-End Lg. | Clevis Inside Wd. | Sleeve Dia. | Pin Dia. | Wt. Cap. | Each | |||
316 Stainless Steel | ||||||||||
| 1/8" | 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/2" | 1/4" | 7/16" | 1/4" | Not Rated | 35215T12 | 000000 | ||
| 5/32" | 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 7/8" | 5/16" | 1/2" | 5/16" | Not Rated | 35215T26 | 00000 | ||
| 3/16" | 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/4" | 7/16" | 9/16" | 7/16" | Not Rated | 35215T27 | 000000 | ||
| 1/4" | 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 3/4" | 1/2" | 5/8" | 1/2" | Not Rated | 35215T28 | 000000 | ||
| 5/16" | 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 11/16" | 9/16" | 3/4" | 9/16" | Not Rated | 35215T29 | 000000 | ||
| 3/8" | 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 5 1/4" | 11/16" | 1" | 11/16" | Not Rated | 35215T31 | 000000 | ||
Stud-End Compression-Grip Wire Rope End Fittings—Not for Lifting
 |
Compress the thin shank wall with a hand tool (sold separately) to attach these light duty end fittings. They are also known as hand swage fittings. Made of 316 stainless steel, these are the most corrosion resistant fittings we offer.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For Wire Rope | Thread | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Construction | Overall Lg. | Size | Lg. | Sleeve Dia. | Req. No. of Compressions | Each | |||
316 Stainless Steel | ||||||||||
| 1/8" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 5/16" | 1/4"-28 | 2 3/16" | 1/4" | 3 | 1683N11 | 000000 | ||
| 3/16" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 15/16" | 1/4"-28 | 2 3/16" | 3/8" | 3 | 1683N12 | 00000 | ||
Hook-End Feed-Through Wire Rope End Fittings—Not for Lifting
 |
Feed the wire rope into the opening at the bottom of these fittings and through the body for a quick and simple installation.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For Wire Rope | Hook | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Construction | Sleeve Dia. | Usable Lg. | Opening Wd. | Wd. | Material | Wt. Cap., lb. | Each | |||
Nickel-Plated Brass | |||||||||||
| 3/64" to 1/16" | 7 × 7 Strand Core 7 × 19 Strand Core | 11/32" | 2 31/32" | 17/32" | 1/4" | Steel | 25 | 1687N11 | 00000 | ||
| 5/64" to 3/32" | 7 × 7 Strand Core 7 × 19 Strand Core | 15/32" | 3 9/16" | 17/32" | 1/4" | Steel | 50 | 1687N12 | 00000 | ||
| 3/32" to 1/8" | 7 × 7 Strand Core 7 × 19 Strand Core | 19/32" | 4 7/32" | 17/32" | 1/4" | Steel | 110 | 1687N13 | 00000 | ||
Eye-End Feed-Through Wire Rope End Fittings—Not for Lifting
 |
Feed the wire rope into the opening at the bottom of these fittings and through the body for a quick and simple installation.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Swivel-Hook-End Plug-Lock Wire Rope End Fittings—For Lifting
 |  |
Fray the end of the wire rope with a marlin spike and screw the socket over the plug to install. An inspection hole confirms proper installation—If wire strands are visible, the fitting has been properly secured.
Use an assembly kit (not included) to support the wire rope while you drive the plug into the wire rope end.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Zinc-Plated Steel—Zinc-plated steel fittings have mild corrosion resistance.
For Wire Rope | Hook | Steel | Zinc-Plated Steel | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Construction | Sleeve Dia. | Usable Lg. | Opening Wd. | Wd. | Fabrication | Material | Wt. Cap., lb. | Specs. Met | Each | Each | |||
| 3/16" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3/4" | 5 31/32" | 1" | 9/16" | Forged | Steel | 665 | ASME B30.26 | 1757N11 | 0000000 | 1757N15 | 0000000 | |
| 1/4" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 15/16" | 6 27/32" | 1 1/16" | 5/8" | Forged | Steel | 1,175 | ASME B30.26 | ——— | 0 | 1757N16 | 000000 | |
| 1/4" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 15/16" | 7 7/16" | 1 1/16" | 5/8" | Forged | Steel | 1,175 | ASME B30.26 | 1757N12 | 000000 | ——— | 0 | |
| 5/16" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 15/16" | 7 19/32" | 1 1/8" | 3/4" | Forged | Steel | 1,830 | ASME B30.26 | ——— | 0 | 1757N17 | 000000 | |
| 3/8" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1 1/8" | 8 17/32" | 1 1/4" | 27/32" | Forged | Steel | 2,620 | ASME B30.26 | 1757N14 | 000000 | 1757N18 | 000000 | |
Mounting-Plate-End Compression-Grip Wire Rope End Fittings—Not for Lifting
 |
Compress the thin shank wall with a hand tool (sold separately) to attach these light duty end fittings. They are also known as hand swage fittings. Made of 316 stainless steel, these are the most corrosion resistant fittings we offer.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For Wire Rope | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Construction | Overall Lg. | Sleeve Dia. | Max. Pivot Angle | Req. No. of Compressions | No. of Mounting Holes | For Screw Size | Mounting Fasteners Included | Rope Cap. Adjustment Factor | Each | |||
316 Stainless Steel | |||||||||||||
Pivoting End | |||||||||||||
| 1/8" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 21/32" | 1/4" | 180° | 3 | 2 | No. 10 | No | 70% | 1865N13 | 000000 | ||
EachIn stock  Select a compatible file type: Parasolid | |||||||||||||
| 3/16" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 5/16" | 1/4" | 180° | 3 | 2 | No. 10 | No | 70% | 1865N14 | 00000 | ||
Wedge-Lock Wire Rope End Fittings—For Lifting
 |  |
Also known as open wedge sockets, these end fittings require only a torque wrench to install. To install, wrap the wire rope around the removable wedge before securing it inside the body. A wire rope clamp attached through the top hole in the wedge secures the short (dead) end.
Two additional holes at the bottom of the wedge can be used as a "go/no go" gauge to determine the proper rope size. The wire rope should pass through the "go" hole and not through the "no go" hole.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Fittings | Replacement Wedges | Replacement Pins | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Wire Rope | |||||||||||||||
Dia. | Construction | Clevis Inside Wd. | For Pin Dia. | Req. Torque, ft·lbf | Rope Cap. Adjustment Factor | Specs. Met | Mil. Spec. | Each | Each | Each | |||||
Red Painted Steel | |||||||||||||||
| 3/8" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 13/16" | 13/16" | 45 | 80% | ASME B30.26 | Fed. Spec. RR-S-550 | 3484T71 | 0000000 | 3484T81 | 000000 | 3484T47 | 000000 | ||
| 1/2" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 1" | 1" | 65 | 80% | ASME B30.26 | Fed. Spec. RR-S-550 | 3484T72 | 000000 | 3484T82 | 00000 | 3484T48 | 00000 | ||
| 5/8" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 1 1/4" | 1 7/32" | 95 | 80% | ASME B30.26 | Fed. Spec. RR-S-550 | 3484T73 | 000000 | 3484T83 | 00000 | 3484T49 | 00000 | ||
| 3/4" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 1 1/2" | 1 13/32" | 130 | 80% | ASME B30.26 | Fed. Spec. RR-S-550 | 3484T74 | 000000 | 3484T84 | 00000 | 3484T51 | 00000 | ||
Clevis-End Feed-Through Wire Rope End Fittings—Not for Lifting
 |
Feed the wire rope into the opening at the bottom of these fittings and through the body for a quick and simple installation.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For Wire Rope | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Construction | End-to-End Lg. | Clevis Inside Wd. | Sleeve Dia. | Pin Dia. | Wt. Cap., lb. | Each | |||
Nickel-Plated Brass | ||||||||||
| 3/64" to 1/16" | 7 × 7 Strand Core 7 × 19 Strand Core | 1 23/32" | 5/16" | 9/16" | 5/16" | 25 | 1841N11 | 000000 | ||
| 1/16" to 3/32" | 7 × 7 Strand Core 7 × 19 Strand Core | 2 7/32" | 1/4" | 15/32" | 1/4" | 50 | 1841N12 | 00000 | ||
| 3/32" to 1/8" | 7 × 7 Strand Core 7 × 19 Strand Core | 3 17/32" | 3/8" | 19/32" | 3/8" | 110 | 1841N13 | 00000 | ||
Eye-End Compression-Grip Wire Rope End Fittings—Not for Lifting
 |
Compress the thin shank wall with a hand tool (sold separately) to attach these light duty end fittings. They are also known as hand swage fittings. Made of 316 stainless steel, these are the most corrosion resistant fittings we offer.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For Wire Rope | Eye | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Construction | End-to-Eye Lg. | ID | Thk. | Sleeve Dia. | Req. No. of Compressions | Each | |||
316 Stainless Steel | ||||||||||
Fixed End | ||||||||||
| 1/8" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/2" | 19/32" | 3/16" | 7/32" | 3 | 1778N13 | 000000 | ||
| 3/16" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 1/8" | 19/32" | 3/16" | 9/32" | 3 | 1778N14 | 00000 | ||
Swiveling End | ||||||||||
| 1/8" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3" | 19/32" | 1/4" | 7/32" | 3 | 1778N11 | 00000 | ||
| 3/16" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 21/32" | 19/32" | 1/4" | 9/32" | 3 | 1778N12 | 00000 | ||
Closed-Body Clevis-to-Wire Rope Turnbuckles—Not for Lifting
 |  |
For use with wire rope in light duty applications, these turnbuckles have a closed body that protects threads from damage and debris. This closed body also means these turnbuckles have a slim profile and fit in tight spaces. Their compression grip fitting is also known as a hand swage fitting. Made of 316 stainless steel, they have excellent resistance to chemicals and salt water.
To attach wire rope, compress the thin shank wall with a hand tool.
Warning: Turnbuckles must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Note: Capacities listed are for straight or in-line pulling only.
Clevis Pin | For Wire Rope | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Rope Cap. Adjustment Factor | Retracted Lg. | Max. Adjustment | Extended Lg. | Dia. | Closure Type | Clevis Inside Wd. | Dia. | Construction | Wire Rope Fitting Type | Thread Size | Each | |||
316 Stainless Steel Body with 316 Stainless Steel End Fitting | ||||||||||||||
| 60% | 8 3/16" | 3 15/16" | 12 1/8" | 1/4" | Cotter Ring | 3/8" | 1/8" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Compression Grip | 1/4"-20 | 1950N11 | 000000 | ||
| 60% | 8 3/16" | 3 15/16" | 12 1/8" | 1/4" | Cotter Ring | 3/8" | 3/16" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Compression Grip | 1/4"-20 | 1950N12 | 00000 | ||
