2780T57 | Steel Ball Bearing

Filter by

System of Measurement

Shaft Diameter

Bearing Seal Type

Width

Ball Bearing Profile

Bearing Trade Number

Cage Material

Bearing Construction

Material

For Load Direction

Combined Radial and Thrust

Combined Radial, Thrust, and Moment

For Housing ID

Inner Ring Type

Ball Material

Shaft Mount Type

Maximum Rotation Speed

Shaft Type

ABEC Rating

Dynamic Radial Load Capacity

Less than 1,000 lb.

1,000 lb. to 9,999 lb.

10,000 lb. to 19,999 lb.

20,000 lb. to 29,999 lb.

30,000 lb. or greater

RoHS

Compliant

Not Compliant

Export Control Classification Number (ECCN)

REACH

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Lubrication

2,160 Products

Ball Bearings

Smoother than smooth—the balls inside these bearings roll nearly friction-free. You’ll often find them on rapidly rotating parts, from the whirring chuck on a power drill to the spinning shaft on an electric motor.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

Corrosion-Resistant 440C Stainless Steel—Combine the strength of steel with the corrosion resistance of stainless steel. These bearings won't degrade from water or mild chemicals, such as the ammonia in cleaning solutions. However, they'll weaken when exposed to salt water and harsh chemicals, such as bleach.

Highly Corrosion-Resistant 316 Stainless Steel—The most corrosion-resistant metal bearings we offer. They won't pit or weaken from salt water or harsh chemicals, such as bleach and chlorine found in cleaning solutions.

Extended Inner Ring—Connect to mating parts without the need for a spacer. The inner ring juts out farther than the outer ring, so shaft collars and other objects won't touch the bearing's moving parts.

ABEC Rating—Bearings with an ABEC rating meet industry tolerance standards established by the Annular Bearing Engineers Committee (ABEC). They're rated on a scale from 1 to 9. The higher the rating, the tighter the tolerance. Bearings rated ABEC 1 or 3 are precise enough for most applications. If your application consistently runs at high speeds or requires high accuracy, consider bearings rated ABEC 5 or higher, since they generate less friction and heat.

							Temp. Range, ° F
	For Shaft Dia.	For Housing ID	Wd.	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Open







				Steel

				1/8"	3/8"	5/32"	1	140	78,000	-65	275	Standard	R2	60355K124	00000


				3/16"	1/2"	5/32"	1	290	60,000	-65	275	Standard	R3	60355K132	0000
				3/16"	11/16"	1/4"	Not Rated	330	1,200	-20	250	Standard	—	6383K11	0000
				1/4"	5/8"	0.196"	1	330	50,000	-65	275	Standard	R4	60355K151	0000
				1/4"	11/16"	1/4"	Not Rated	250	2,500	-20	250	Standard	3002	6383K12	00000
				1/4"	11/16"	1/4"	Not Rated	510	5,000	-20	250	Standard	1602	2780T11	00000
				1/4"	7/8"	1/4"	Not Rated	400	1,200	-20	250	Standard	—	6383K14	0000
				1/4"	1"	5/16"	Not Rated	530	1,200	-20	250	Standard	—	6383K22	0000
				1/4"	1 1/16"	1/4"	Not Rated	560	1,200	-20	250	Standard	—	6383K25	00000
				5/16"	7/8"	1/4"	Not Rated	420	1,200	-20	250	Standard	—	6383K15	0000
				5/16"	7/8"	9/32"	Not Rated	640	5,000	-20	250	Standard	1603	2780T12	00000


				5/16"	29/32"	5/16"	Not Rated	690	5,000	-20	250	Standard	1605	2780T14	00000
				5/16"	1 1/16"	3/8"	Not Rated	600	1,200	-20	250	Standard	—	6383K26	00000
				5/16"	1 9/32"	5/16"	Not Rated	780	1,200	-20	250	Standard	—	6383K38	00000
				3/8"	7/8"	7/32"	1	740	37,000	-65	275	Standard	R6	60355K165	0000
				3/8"	7/8"	1/4"	Not Rated	440	1,200	-20	250	Standard	—	6383K16	0000
				3/8"	7/8"	9/32"	Not Rated	640	5,000	-20	250	Standard	1604	2780T13	00000
				3/8"	29/32"	5/16"	Not Rated	690	5,000	-20	250	Standard	1606	2780T15	00000
				3/8"	15/16"	5/16"	Not Rated	440	1,200	-20	250	Standard	—	6383K19	00000
				3/8"	1"	5/16"	Not Rated	550	1,200	-20	250	Standard	—	6383K23	0000
				3/8"	1 1/16"	3/8"	Not Rated	630	1,200	-20	250	Standard	—	6383K27	0000


				3/8"	1 1/8"	3/8"	Not Rated	600	2,500	-20	250	Standard	3014	6383K32	00000
				3/8"	1 1/8"	3/8"	Not Rated	1,200	5,000	-20	250	Standard	1614	2780T17	00000
				7/16"	7/8"	1/4"	Not Rated	440	1,200	-20	250	Standard	—	6383K17	0000
				7/16"	29/32"	5/16"	Not Rated	690	5,000	-20	250	Standard	1607	2780T16	00000
				7/16"	1 1/8"	3/8"	Not Rated	600	2,500	-20	250	Standard	3015	6383K33	00000
				1/2"	1 1/8"	1/4"	1	1,140	30,000	-65	275	Standard	R8	60355K173	0000
				1/2"	1 1/8"	3/8"	Not Rated	600	2,500	-20	250	Standard	3016	6383K34	00000
				1/2"	1 1/8"	3/8"	Not Rated	1,200	5,000	-20	250	Standard	1616	2780T18	00000
				1/2"	1 9/32"	5/16"	Not Rated	880	1,200	-20	250	Standard	—	6383K39	00000
				1/2"	1 3/8"	7/16"	Not Rated	940	2,500	-20	250	Standard	3021	6383K41	00000


				1/2"	1 3/8"	7/16"	Not Rated	1,850	5,000	-20	250	Standard	1621	2780T19	00000
				1/2"	1 1/2"	7/16"	Not Rated	1,300	1,200	-20	250	Standard	—	6383K45	00000
				1/2"	1 3/4"	9/16"	Not Rated	1,400	1,200	-20	250	Standard	—	6383K53	00000
				5/8"	1 3/8"	9/32"	1	1,340	24,000	-65	275	Standard	R10	60355K178	0000
				5/8"	1 3/8"	7/16"	Not Rated	940	2,500	-20	250	Standard	3023	6383K44	00000
				5/8"	1 3/8"	7/16"	Not Rated	1,850	5,000	-20	250	Standard	1623	2780T21	00000
				5/8"	1 1/2"	7/16"	Not Rated	1,300	1,200	-20	250	Standard	—	6383K47	00000
				5/8"	1 5/8"	1/2"	Not Rated	2,550	5,000	-20	250	Standard	1628	2780T22	00000
				5/8"	1 3/4"	1/2"	Not Rated	2,550	5,000	-20	250	Standard	1633	2780T24	00000
				3/4"	1 5/8"	5/16"	1	1,780	21,000	-65	275	Standard	R12	60355K185	0000


				3/4"	1 5/8"	3/8"	Not Rated	1,450	1,200	-20	250	Standard	—	6383K49	00000
				3/4"	1 5/8"	1/2"	Not Rated	1,300	2,500	-20	250	Standard	3030	6383K52	00000
				3/4"	1 5/8"	1/2"	Not Rated	2,550	5,000	-20	250	Standard	1630	2780T23	00000
				3/4"	1 3/4"	1/2"	Not Rated	2,550	5,000	-20	250	Standard	1635	2780T1	00000
3/4"				1 3/4"	9/16"	Not Rated	1,550	1,200	-20	250	Standard	—	6383K51	00000
3/4"	2"			9/16"	Not Rated	2,950	5,000	-20	250	Standard	1638	2780T25	00000
7/8"	1 7/8"			3/8"	1	2,250	14,500	-20	230	Standard	R14	60355K508	00000
1"	2"			3/8"	1	2,400	14,500	-20	230	Standard	R16	60355K509	00000
1"	2"			1/2"	Not Rated	1,700	1,200	-20	250	Standard	—	6383K57	00000
1"	2"	9/16"		Not Rated	2,950	5,000	-20	250	Standard	1641	2780T26	00000
1 1/8"	2 1/8"	3/8"	1	2,150	15,000	-20	230	Standard	R18	60355K211	00000
1 1/8"	2 1/2"	5/8"	Not Rated	3,850	5,000	-20	250	Standard	1652	2780T27	00000
1 1/4"	2 1/4"	3/8"	1	2,400	15,000	-20	230	Standard	R20	60355K22	00000
1 1/4"	2 1/2"	5/8"	Not Rated	3,850	5,000	-20	250	Standard	1654	2780T28	00000
1 1/4"	2 9/16"	11/16"	Not Rated	5,350	5,000	-20	250	Standard	1657	2780T29	00000
1 3/8"	2 1/2"	7/16"	1	3,550	10,500	-20	230	Standard	R22	60355K511	00000
1 1/2"	2 5/8"	7/16"	1	3,750	10,000	-20	230	Standard	R24	60355K512	00000
1 1/2"	3 5/16"	13/16"	Not Rated	6,189	5,000	-20	250	Standard	1660	2780T77	00000
1 3/4"	3 5/16"	13/16"	Not Rated	6,189	5,000	-20	250	Standard	1662	2780T81	00000
5 mm	19 mm	6 mm	1	580	53,000	-20	230	Standard	635	5972K197	00000
8 mm	22 mm	7 mm	1	730	36,000	-20	230	Standard	608	5972K91	0000
9 mm	26 mm	8 mm	1	1,000	34,000	-20	230	Standard	629	5972K93	0000
10 mm	15 mm	3 mm	1	190	15,000	-50	130	Standard	6700	6656K68	00000
10 mm	19 mm	5 mm	1	380	37,000	-20	230	Standard	6800	5972K211	0000
10 mm	19 mm	7 mm	1	380	43,000	-50	130	Standard	63800	6656K72	00000
10 mm	22 mm	6 mm	1	600	34,000	-20	230	Standard	6900	5972K241	0000
10 mm	26 mm	8 mm	1	1,000	34,000	-20	230	Standard	6000	5972K94	00000
10 mm	28 mm	8 mm	1	1,100	34,000	-20	230	Standard	16100	5972K223	00000
10 mm	30 mm	9 mm	1	1,550	40,500	-20	230	Standard	6200	5972K101	0000
12 mm	18 mm	4 mm	1	205	15,000	-50	130	Standard	6701	6656K76	00000
12 mm	21 mm	5 mm	1	430	33,000	-20	230	Standard	6801	5972K212	0000
12 mm	24 mm	6 mm	1	640	31,000	-20	230	Standard	6901	5972K242	0000
12 mm	28 mm	8 mm	1	1,100	32,000	-20	230	Standard	6001	5972K95	00000
12 mm	30 mm	8 mm	1	1,100	32,000	-20	230	Standard	16101	5972K224	00000
12 mm	32 mm	10 mm	1	1,550	30,000	-20	230	Standard	6201	5972K313	0000
12 mm	37 mm	12 mm	1	2,150	28,500	-20	230	Standard	6301	5972K318	0000
15 mm	21 mm	4 mm	1	210	13,000	-50	130	Standard	6702	6656K84	00000
15 mm	24 mm	5 mm	1	460	28,000	-20	230	Standard	6802	5972K213	0000
15 mm	28 mm	7 mm	1	970	26,000	-20	230	Standard	6902	5972K243	00000
15 mm	32 mm	8 mm	1	1,300	33,500	-20	230	Standard	16002	5972K199	00000
15 mm	32 mm	9 mm	1	1,250	30,000	-20	230	Standard	6002	5972K358	00000
15 mm	35 mm	11 mm	1	1,750	26,000	-20	230	Standard	6202	5972K314	0000
15 mm	42 mm	13 mm	1	2,650	25,000	-20	230	Standard	6302	5972K117	0000
17 mm	23 mm	4 mm	1	220	11,000	-50	130	Standard	6703	6656K92	00000
17 mm	26 mm	5 mm	1	500	26,000	-20	230	Standard	6803	5972K214	0000
17 mm	30 mm	7 mm	1	1,000	23,000	-20	230	Standard	6903	5972K244	00000
17 mm	35 mm	10 mm	1	1,300	28,000	-20	230	Standard	6003	5972K311	00000
17 mm	40 mm	12 mm	1	2,250	26,500	-20	230	Standard	6203	5972K104	0000
17 mm	47 mm	14 mm	1	3,000	22,300	-20	230	Standard	6303	5972K118	00000
17 mm	62 mm	17 mm	1	5,350	16,000	-20	230	Standard	6403	5972K198	00000
20 mm	27 mm	4 mm	1	310	10,000	-50	130	Standard	6704	6656K101	00000
20 mm	32 mm	7 mm	1	900	21,000	-20	230	Standard	6804	5972K215	00000
20 mm	32 mm	10 mm	1	900	25,000	-50	130	Standard	63804	6656K105	00000
20 mm	37 mm	9 mm	1	1,400	19,000	-20	230	Standard	6904	5972K245	00000
20 mm	42 mm	8 mm	1	1,650	26,000	-20	230	Standard	16004	5972K218	00000
20 mm	47 mm	14 mm	1	3,050	22,000	-20	230	Standard	6204	5972K105	00000
20 mm	52 mm	15 mm	1	3,550	19,800	-20	230	Standard	6304	5972K119	00000
25 mm	32 mm	4 mm	1	245	8,000	-50	130	Standard	6705	6656K108	00000
25 mm	37 mm	7 mm	1	960	18,000	-20	230	Standard	6805	5972K216	00000
25 mm	42 mm	9 mm	1	1,550	16,000	-20	230	Standard	6905	5972K246	00000
25 mm	47 mm	8 mm	1	1,700	22,500	-20	230	Standard	16005	5972K219	00000
25 mm	52 mm	15 mm	1	3,100	17,000	-20	230	Standard	6205	5972K315	00000
25 mm	62 mm	17 mm	1	5,000	16,200	-20	230	Standard	6305	5972K121	00000
30 mm	37 mm	4 mm	1	250	7,000	-50	130	Standard	6706	6656K116	00000
30 mm	42 mm	7 mm	1	1,000	15,000	-20	230	Standard	6806	5972K217	00000
30 mm	47 mm	9 mm	1	1,600	14,000	-20	230	Standard	6906	5972K247	00000
30 mm	62 mm	16 mm	1	4,300	14,000	-20	230	Standard	6206	5972K316	00000
30 mm	72 mm	19 mm	1	6,500	13,700	-20	230	Standard	6306	5972K319	00000
35 mm	44 mm	5 mm	1	410	6,000	-50	130	Standard	6707	6656K123	00000
35 mm	55 mm	10 mm	1	2,450	12,000	-20	230	Standard	6907	5972K248	00000
35 mm	62 mm	14 mm	1	3,550	16,100	-20	230	Standard	6007	5972K312	00000
35 mm	72 mm	17 mm	1	5,700	24,000	-20	230	Standard	6207	5972K317	00000
35 mm	80 mm	21 mm	1	7,500	12,200	-20	230	Standard	6307	5972K503	00000
40 mm	50 mm	6 mm	1	560	5,000	-50	130	Standard	6708	6656K129	00000
40 mm	52 mm	7 mm	1	1,100	14,000	-50	130	Standard	6808	6656K132	00000
40 mm	62 mm	12 mm	1	3,050	11,000	-20	230	Standard	6908	5972K249	00000
40 mm	80 mm	18 mm	1	5,550	8,300	-20	230	Standard	6208	5972K114	00000
40 mm	90 mm	23 mm	1	9,550	10,800	-20	230	Standard	6308	5972K124	00000
45 mm	55 mm	6 mm	1	580	4,600	-50	130	Standard	6709	6656K136	000000
45 mm	58 mm	7 mm	1	1,350	13,000	-50	130	Standard	6809	6656K137	00000
45 mm	85 mm	19 mm	1	6,200	7,700	-20	230	Standard	6209	5972K115	00000
45 mm	100 mm	25 mm	1	11,900	9,500	-20	230	Standard	6309	5972K125	00000
50 mm	65 mm	7 mm	1	1,450	11,000	-50	130	Standard	6810	6656K142	00000
50 mm	72 mm	12 mm	1	3,250	11,000	-50	130	Standard	6910	6656K144	00000
50 mm	90 mm	20 mm	1	6,650	7,100	-20	230	Standard	6210	5972K129	00000
50 mm	110 mm	27 mm	1	13,900	9,500	-20	230	Standard	6310	5972K126	00000
55 mm	72 mm	9 mm	1	1,950	10,000	-50	130	Standard	6811	6656K146	00000
55 mm	80 mm	13 mm	1	3,700	10,000	-50	130	Standard	6911	6656K147	00000
55 mm	100 mm	21 mm	1	10,300	9,500	-20	230	Standard	6211	5972K113	00000
55 mm	120 mm	29 mm	1	17,100	8,500	-20	230	Standard	6311	5972K127	00000
60 mm	78 mm	10 mm	1	2,550	9,400	-50	130	Standard	6812	6656K148	00000
60 mm	85 mm	13 mm	1	4,500	8,900	-50	130	Standard	6912	6656K149	00000
60 mm	110 mm	22 mm	1	11,600	9,300	-20	230	Standard	6212	5972K3	00000
60 mm	130 mm	31 mm	1	18,300	7,900	-20	230	Standard	6312	5972K128	00000
65 mm	85 mm	10 mm	1	2,650	8,600	-50	130	Standard	6813	6656K151	00000
70 mm	90 mm	10 mm	1	2,700	8,100	-50	130	Standard	6814	6656K153	00000
85 mm	120 mm	18 mm	1	7,150	6,300	-50	130	Standard	6917	6656K161	000000
90 mm	115 mm	13 mm	1	4,250	6,300	-50	130	Standard	6818	6656K162	000000



		Corrosion-Resistant 440C Stainless Steel

		0.04"	1/8"	3/64"	5	20	140,000	-40	240	Standard	R09	57155K339	00000


		3/64"	5/32"	1/16"	5	30	120,000	-40	240	Standard	R0	57155K341	0000
		0.055"	3/16"	5/64"	5	50	110,000	-40	240	Standard	R1	57155K342	0000
		5/64"	1/4"	3/32"	5	70	80,000	-40	240	Standard	R1-4	57155K343	0000
		3/32"	3/16"	1/16"	5	40	95,000	-40	240	Standard	R133	57155K344	0000
		3/32"	5/16"	7/64"	5	120	71,000	-40	240	Standard	R1-5	57155K345	0000
		1/8"	1/4"	3/32"	5	60	80,000	-40	240	Standard	R144	57155K346	0000
		1/8"	5/16"	7/64"	5	120	71,000	-40	240	Standard	R2-5	57155K347	0000
		1/8"	3/8"	7/64"	5	140	63,000	-40	240	Standard	R2-6	57155K348	0000
		1/8"	3/8"	5/32"	1	110	67,000	-40	240	Standard	R2	6138K11	0000
		1/8"	3/8"	5/32"	5	140	67,000	-10	240	Standard	R2	57155K349	0000


		5/32"	5/16"	7/64"	5	80	63,000	-40	240	Standard	R155	57155K351	0000
		3/16"	5/16"	7/64"	5	80	63,000	-40	240	Standard	R156	57155K352	0000
		3/16"	3/8"	1/8"	5	160	60,000	-40	240	Standard	R166	57155K353	0000
		3/16"	1/2"	5/32"	1	230	53,000	-40	240	Standard	R3	6138K42	0000
		3/16"	1/2"	5/32"	5	290	50,000	-10	240	Standard	R3	57155K354	0000
		1/4"	3/8"	1/8"	5	80	56,000	-40	240	Standard	R168	57155K355	0000
		1/4"	1/2"	1/8"	5	240	50,000	-40	240	Standard	R188	57155K356	0000
		1/4"	5/8"	0.196"	1	260	45,000	-40	240	Standard	R4	6138K13	0000
		1/4"	5/8"	0.196"	5	330	45,000	-10	240	Standard	R4	57155K357	0000
		5/16"	1/2"	5/32"	5	120	48,000	-40	240	Standard	R1810	57155K358	0000


		3/8"	7/8"	7/32"	1	590	38,000	-40	240	Standard	R6	6138K14	0000
		1/2"	1 1/8"	1/4"	1	910	32,000	-40	240	Standard	R8	6138K15	00000
		5/8"	1 3/8"	9/32"	1	1,050	21,000	-40	240	Standard	R10	6138K16	00000
		3/4"	1 5/8"	5/16"	1	1,650	21,000	-40	240	Standard	R12	6138K69	00000
		1"	2"	3/8"	1	1,650	9,900	-20	390	Standard	R16	6138K102	00000
		5 mm	16 mm	5 mm	3	310	43,000	-40	240	Standard	625	6153K113	00000
		6 mm	19 mm	6 mm	3	440	38,000	-40	240	Standard	626	6153K24	00000
		7 mm	22 mm	7 mm	3	590	36,000	-40	240	Standard	627	6153K114	00000
		8 mm	19 mm	6 mm	3	400	43,000	-40	240	Standard	698	6153K116	00000
		8 mm	22 mm	7 mm	3	590	40,000	-40	240	Standard	608	6153K111	00000


		9 mm	24 mm	7 mm	3	600	32,000	-40	240	Standard	609	6153K112	00000
		9 mm	26 mm	8 mm	3	820	34,000	-40	240	Standard	629	6153K115	00000
		10 mm	15 mm	3 mm	1	190	15,000	-50	130	Standard	6700	6656K69	00000
		10 mm	19 mm	5 mm	1	380	43,000	-50	130	Standard	6800	6656K71	00000
		10 mm	22 mm	6 mm	1	600	41,000	-50	130	Standard	6900	6656K75	00000
		10 mm	26 mm	8 mm	1	870	33,000	-40	240	Standard	6000	6153K125	00000
		10 mm	30 mm	9 mm	1	780	24,000	-40	240	Standard	6200	6153K117	00000
		12 mm	18 mm	4 mm	1	205	15,000	-50	130	Standard	6701	6656K77	00000
		12 mm	24 mm	6 mm	1	640	36,000	-50	130	Standard	6901	6656K83	00000
		12 mm	28 mm	8 mm	1	970	30,000	-40	240	Standard	6001	6153K127	00000


		12 mm	32 mm	10 mm	1	1,000	22,000	-40	240	Standard	6201	6153K118	00000
		12 mm	37 mm	12 mm	1	1,850	25,000	-40	240	Standard	6301	6153K128	00000
		15 mm	24 mm	7 mm	1	460	33,000	-50	130	Standard	63802	6656K89	00000
		15 mm	28 mm	7 mm	1	970	30,000	-50	130	Standard	6902	6656K91	00000
		15 mm	32 mm	9 mm	1	1,050	26,000	-40	240	Standard	6002	6153K129	00000
		15 mm	35 mm	11 mm	1	1,150	20,000	-40	240	Standard	6202	6153K119	00000
		17 mm	23 mm	4 mm	1	220	11,000	-50	130	Standard	6703	6656K93	00000
		17 mm	35 mm	10 mm	1	1,100	24,000	-40	240	Standard	6003	6153K132	00000
		17 mm	40 mm	12 mm	1	1,450	17,000	-40	240	Standard	6203	6153K121	00000
20 mm		27 mm	4 mm	1	310	10,000	-50	130	Standard	6704	6656K102	00000
20 mm	42 mm	12 mm	1	1,750	20,000	-40	240	Standard	6004	6153K134	00000
20 mm	47 mm	14 mm	1	1,950	15,000	-40	240	Standard	6204	6153K122	00000
25 mm	47 mm	12 mm	1	1,900	18,000	-40	240	Standard	6005	6153K136	00000
25 mm	52 mm	15 mm	1	2,100	13,000	-40	240	Standard	6205	6153K123	00000
30 mm	37 mm	4 mm	1	250	7,000	-50	130	Standard	6706	6656K117	00000
30 mm	55 mm	13 mm	1	2,500	15,000	-40	240	Standard	6006	6153K138	00000
30 mm	62 mm	16 mm	1	2,950	11,000	-40	240	Standard	6206	6153K124	00000
35 mm	44 mm	5 mm	1	410	6,000	-50	130	Standard	6707	6656K124	00000
35 mm	47 mm	7 mm	1	1,050	16,000	-50	130	Standard	6807	6656K126	00000
40 mm	68 mm	15 mm	1	3,200	12,000	-40	240	Standard	6008	6153K144	000000
45 mm	75 mm	16 mm	1	2,900	11,000	-40	240	Standard	6009	6153K146	000000
50 mm	80 mm	16 mm	1	3,000	9,900	-40	240	Standard	6010	6153K148	000000



		Highly Corrosion-Resistant 316 Stainless Steel

		1/8"	1/2"	5/32"	Not Rated	65	3,100	-40	140	Standard	R2A	5908K61	00000


		3/16"	1/2"	5/32"	Not Rated	65	3,100	-40	140	Standard	R3	5908K62	00000
		1/4"	5/8"	0.196"	Not Rated	75	2,300	-40	140	Standard	R4	5908K11	00000
		1/4"	3/4"	7/32"	Not Rated	75	2,300	-40	140	Standard	R4A	5908K12	00000
		1/4"	3/4"	9/32"	Not Rated	75	2,300	-40	140	Standard	R4A	5908K711	00000
		3/8"	7/8"	7/32"	Not Rated	120	1,600	-40	140	Standard	R6	5908K13	00000
		3/8"	7/8"	9/32"	Not Rated	120	1,600	-40	140	Standard	R6	5908K14	00000
		3/8"	1 1/8"	3/8"	Not Rated	160	1,100	-40	140	Standard	1614	5908K16	00000
		3/8"	1 3/8"	7/16"	Not Rated	200	1,000	-40	140	Standard	R10B	5908K715	00000
		1/2"	1 1/8"	1/4"	Not Rated	160	1,100	-40	140	Standard	R8	5908K15	00000
		1/2"	1 1/8"	3/8"	Not Rated	160	1,100	-40	140	Standard	R8A	5908K713	00000


		1/2"	1 3/8"	7/16"	Not Rated	200	1,000	-40	140	Standard	1621	5908K17	00000
		5/8"	1 1/8"	1/4"	Not Rated	160	1,100	-40	140	Standard	—	5908K712	00000
		5/8"	1 3/8"	3/8"	Not Rated	200	1,000	-40	140	Standard	R10A	5908K714	00000
		5/8"	1 3/8"	7/16"	Not Rated	200	1,000	-40	140	Standard	1623	5908K18	00000
		3/4"	1 5/8"	5/16"	Not Rated	230	800	-40	140	Standard	R12	5908K19	00000
		3/4"	1 5/8"	7/16"	Not Rated	230	840	-40	140	Standard	R12	5908K716	00000
		7/8"	1 7/8"	3/8"	Not Rated	230	800	-40	140	Standard	R14	5908K63	00000
		1"	2"	1/2"	Not Rated	270	700	-40	140	Standard	R16	5908K21	00000
		1 1/8"	2 1/8"	1/2"	Not Rated	270	720	-40	140	Standard	R18	5908K718	00000
		1 1/4"	2"	1/2"	Not Rated	270	720	-40	140	Standard	—	5908K717	00000


		1 1/4"	2 1/4"	1/2"	Not Rated	270	720	-40	140	Standard	R20	5908K719	00000
		4 mm	13 mm	5 mm	Not Rated	75	2,300	-40	140	Standard	624	5908K721	00000
		5 mm	16 mm	5 mm	Not Rated	75	2,300	-40	140	Standard	625	5908K51	00000
		5 mm	19 mm	6 mm	Not Rated	75	2,300	-40	140	Standard	635	5908K723	00000
		6 mm	17 mm	6 mm	Not Rated	75	2,300	-40	140	Standard	606	5908K64	00000
		6 mm	19 mm	6 mm	Not Rated	75	2,300	-40	140	Standard	626	5908K724	00000
		6 mm	22 mm	7 mm	Not Rated	120	1,600	-40	140	Standard	636	5908K725	00000
		7 mm	19 mm	6 mm	Not Rated	75	2,300	-40	140	Standard	607	5908K65	00000
		7 mm	26 mm	9 mm	Not Rated	120	1,600	-40	140	Standard	637	5908K727	00000
		8 mm	22 mm	7 mm	Not Rated	120	1,600	-40	140	Standard	608	5908K31	00000


		8 mm	24 mm	8 mm	Not Rated	120	1,600	-40	140	Standard	628	5908K728	00000
		8 mm	28 mm	9 mm	Not Rated	160	1,140	-40	140	Standard	638	5908K729	00000
		9 mm	26 mm	8 mm	Not Rated	120	1,600	-40	140	Standard	629	5908K731	00000
		10 mm	26 mm	8 mm	Not Rated	120	1,600	-40	140	Standard	6000	5908K52	00000
		10 mm	30 mm	9 mm	Not Rated	160	1,100	-40	140	Standard	6200	5908K39	00000
		12 mm	28 mm	8 mm	Not Rated	160	1,100	-40	140	Standard	6001	5908K34	00000
		12 mm	32 mm	10 mm	Not Rated	160	1,100	-40	140	Standard	6201	5908K41	00000
		15 mm	32 mm	9 mm	Not Rated	160	1,100	-40	140	Standard	6002	5908K35	00000
		15 mm	35 mm	11 mm	Not Rated	200	1,000	-40	140	Standard	6202	5908K53	00000
		17 mm	35 mm	10 mm	Not Rated	200	1,000	-40	140	Standard	6003	5908K67	00000


		17 mm	40 mm	12 mm	Not Rated	200	1,000	-40	140	Standard	6203	5908K68	00000
		17 mm	47 mm	14 mm	Not Rated	230	840	-40	140	Standard	6303	5908K739	00000
		20 mm	42 mm	12 mm	Not Rated	230	800	-40	140	Standard	6004	5908K56	00000
		20 mm	52 mm	15 mm	Not Rated	270	720	-40	140	Standard	6304	5908K741	00000
		25 mm	47 mm	12 mm	Not Rated	270	700	-40	140	Standard	6005	5908K58	00000
		25 mm	62 mm	17 mm	Not Rated	270	720	-40	140	Standard	6305	5908K742	00000
		30 mm	55 mm	13 mm	Not Rated	270	720	-40	140	Standard	6006	5908K733	00000


Shielded







				Steel

				1/8"	3/8"	5/32"	1	140	60,000	-58	302	Standard	R2-2Z	60355K209	0000


				3/16"	1/2"	0.196"	1	290	51,000	-58	302	Standard	R3-2Z	60355K232	0000
				3/16"	11/16"	1/4"	Not Rated	250	2,500	-20	250	Standard	3001-2Z	6384K91	00000
				1/4"	5/8"	0.196"	1	330	42,000	-58	302	Standard	R4-2Z	60355K246	0000
				1/4"	11/16"	1/4"	Not Rated	250	2,500	-20	250	Standard	3002-2Z	6384K52	00000
				1/4"	11/16"	1/4"	Not Rated	510	5,000	-20	250	Standard	1602-2Z	2780T31	00000
				1/4"	3/4"	9/32"	1	520	38,000	-58	302	Standard	R4A-2Z	60355K271	0000
				5/16"	7/8"	9/32"	Not Rated	320	2,500	-20	250	Standard	3003-2Z	6384K53	00000
				5/16"	7/8"	9/32"	Not Rated	640	5,000	-20	250	Standard	1603-2Z	2780T32	00000
				5/16"	29/32"	5/16"	Not Rated	350	2,500	-20	250	Standard	3005-2Z	6384K55	00000
				5/16"	29/32"	5/16"	Not Rated	690	5,000	-20	250	Standard	1605-2Z	2780T34	00000


				3/8"	7/8"	9/32"	1	740	31,000	-58	302	Standard	R6-2Z	60355K283	0000
				3/8"	7/8"	9/32"	Not Rated	320	2,500	-20	250	Standard	3004-2Z	6384K54	00000
				3/8"	7/8"	9/32"	Not Rated	640	5,000	-20	250	Standard	1604-2Z	2780T33	00000
				3/8"	29/32"	5/16"	Not Rated	350	2,500	-20	250	Standard	3006-2Z	6384K56	00000
				3/8"	29/32"	5/16"	Not Rated	690	5,000	-20	250	Standard	1606-2Z	2780T35	00000
				3/8"	1 1/8"	3/8"	Not Rated	600	2,500	-20	250	Standard	3014-2Z	6384K58	00000
				3/8"	1 1/8"	3/8"	Not Rated	1,200	5,000	-20	250	Standard	1614-2Z	2780T37	00000
				7/16"	29/32"	5/16"	Not Rated	350	2,500	-20	250	Standard	3007-2Z	6384K57	00000
				7/16"	29/32"	5/16"	Not Rated	690	5,000	-20	250	Standard	1607-2Z	2780T36	00000
				7/16"	1 1/8"	3/8"	Not Rated	600	2,500	-20	250	Standard	3015-2Z	6384K59	00000


				7/16"	1 1/8"	3/8"	Not Rated	1,200	5,000	-20	250	Standard	1615-2Z	2780T71	00000
				7/16"	1 3/8"	7/16"	Not Rated	940	2,500	-20	250	Standard	3020-2Z	6384K62	00000
				7/16"	1 3/8"	7/16"	Not Rated	1,850	5,000	-20	250	Standard	1620-2Z	2780T72	00000
				1/2"	1 1/8"	5/16"	1	1,140	25,000	-58	302	Standard	R8-2Z	60355K291	0000
				1/2"	1 1/8"	3/8"	Not Rated	600	2,500	-20	250	Standard	3016-2Z	6384K61	00000
				1/2"	1 1/8"	3/8"	Not Rated	1,200	5,000	-20	250	Standard	1616-2Z	2780T38	00000
				1/2"	1 3/8"	7/16"	Not Rated	940	2,500	-20	250	Standard	3021-2Z	6384K63	00000
				1/2"	1 3/8"	7/16"	Not Rated	1,850	5,000	-20	250	Standard	1621-2Z	2780T39	00000
				9/16"	1 3/8"	7/16"	Not Rated	940	2,500	-20	250	Standard	3022-2Z	6384K64	00000
				5/8"	1 3/8"	11/32"	1	1,340	20,000	-58	302	Standard	R10-2Z	60355K295	00000


				5/8"	1 3/8"	7/16"	Not Rated	940	2,500	-20	250	Standard	3023-2Z	6384K65	00000
				5/8"	1 3/8"	7/16"	Not Rated	1,850	5,000	-20	250	Standard	1623-2Z	2780T41	00000
				5/8"	1 5/8"	1/2"	Not Rated	1,300	2,500	-20	250	Standard	3028-2Z	6384K66	00000
				5/8"	1 5/8"	1/2"	Not Rated	2,550	5,000	-20	250	Standard	1628-2Z	2780T42	00000
				5/8"	1 3/4"	1/2"	Not Rated	1,300	2,500	-20	250	Standard	3033-2Z	6384K68	00000
				5/8"	1 3/4"	1/2"	Not Rated	2,550	5,000	-20	250	Standard	1633-2Z	2780T44	00000
				3/4"	1 5/8"	7/16"	1	1,630	17,000	-58	302	Standard	R12-2Z	60355K297	00000
				3/4"	1 5/8"	1/2"	Not Rated	1,300	2,500	-20	250	Standard	3030-2Z	6384K67	00000
				3/4"	1 5/8"	1/2"	Not Rated	2,550	5,000	-20	250	Standard	1630-2Z	2780T43	00000
				3/4"	1 3/4"	1/2"	Not Rated	1,300	2,500	-20	250	Standard	3035-2Z	6384K69	00000


				3/4"	1 3/4"	1/2"	Not Rated	2,550	5,000	-20	250	Standard	1635-2Z	2780T2	00000
				3/4"	2"	9/16"	Not Rated	1,450	2,500	-20	250	Standard	3038-2Z	6384K71	00000
				3/4"	2"	9/16"	Not Rated	2,950	5,000	-20	250	Standard	1638-2Z	2780T45	00000
				7/8"	1 7/8"	1/2"	1	2,250	9,000	-20	230	Standard	R14-2Z	60355K604	00000
7/8"				2"	9/16"	Not Rated	1,450	2,500	-20	250	Standard	3040-2Z	6384K72	00000
7/8"	2"			9/16"	Not Rated	2,950	5,000	-20	250	Standard	1640-2Z	2780T73	00000
1"	2"			1/2"	1	1,850	11,000	-58	302	Standard	R16-2Z	60355K316	00000
1"	2"			9/16"	Not Rated	1,450	2,500	-20	250	Standard	3041-2Z	6384K73	00000
1"	2"			9/16"	Not Rated	2,950	5,000	-20	250	Standard	1641-2Z	2780T46	00000
1 1/8"	2 1/8"	1/2"		1	2,150	15,000	-20	230	Standard	R18-2Z	60355K812	00000
1 1/8"	2 1/2"	5/8"	Not Rated	3,850	5,000	-20	250	Standard	1652-2Z	2780T47	00000
1 1/4"	2 1/4"	1/2"	1	2,400	15,000	-20	230	Standard	R20-2Z	60355K821	00000
1 1/4"	2 1/2"	5/8"	Not Rated	3,850	5,000	-20	250	Standard	1654-2Z	2780T48	00000
1 1/4"	2 9/16"	11/16"	Not Rated	5,350	5,000	-20	250	Standard	1657-2Z	2780T49	00000
1 3/8"	2 1/2"	9/16"	1	3,550	6,300	-20	230	Standard	R22-2Z	60355K606	00000
1 1/2"	2 5/8"	9/16"	1	3,750	5,900	-20	230	Standard	R24-2Z	60355K607	00000
1 1/2"	3 5/16"	13/16"	Not Rated	6,189	5,000	-20	250	Standard	1660-2Z	2780T79	00000
1 3/4"	3 5/16"	13/16"	Not Rated	6,189	5,000	-20	250	Standard	1662-2Z	2780T83	00000
3 mm	10 mm	4 mm	3	120	60,000	-20	230	Standard	623-2Z	4481N31	00000
4 mm	13 mm	5 mm	3	210	53,000	-20	230	Standard	624-2Z	4481N32	00000
4 mm	16 mm	5 mm	1	440	53,000	-20	230	Standard	634-2Z	5972K634	00000
4 mm	16 mm	5 mm	3	250	48,000	-20	230	Standard	634-2Z	4481N46	00000
5 mm	16 mm	5 mm	3	260	48,000	-20	230	Standard	625-2Z	4481N33	00000
5 mm	19 mm	6 mm	1	580	45,000	-20	230	Standard	635-2Z	5972K263	00000
5 mm	19 mm	6 mm	3	530	40,000	-20	230	Standard	635-2Z	4481N47	00000
6 mm	19 mm	6 mm	3	520	40,000	-20	250	Standard	626-2Z	6661K11	00000
7 mm	19 mm	6 mm	1	580	45,000	-20	230	Standard	607-2Z	5972K261	00000
7 mm	19 mm	6 mm	3	530	43,000	-20	230	Standard	607-2Z	4481N11	00000
7 mm	22 mm	7 mm	3	780	36,000	-20	230	Standard	627-2Z	4481N35	00000
8 mm	22 mm	7 mm	1	730	30,000	-20	230	Standard	608-2Z	5972K501	00000
8 mm	22 mm	7 mm	3	770	38,000	-20	230	Standard	608-2Z	6661K12	00000
9 mm	24 mm	7 mm	3	880	34,000	-20	230	Standard	609-2Z	4481N012	00000
9 mm	26 mm	8 mm	1	1,000	28,000	-20	230	Standard	629-2Z	5972K321	0000
9 mm	26 mm	8 mm	3	1,050	30,000	-20	230	Standard	629-2Z	4481N36	00000
10 mm	15 mm	4 mm	1	190	15,000	-40	150	Standard	6700-2Z	6656K163	00000
10 mm	19 mm	5 mm	1	380	37,000	-20	230	Standard	6800-2Z	5972K153	0000
10 mm	19 mm	7 mm	1	380	37,000	-40	150	Standard	63800-2Z	6656K167	00000
10 mm	22 mm	6 mm	1	600	34,000	-20	230	Standard	6900-2Z	5972K164	0000
10 mm	26 mm	8 mm	1	1,000	28,000	-20	230	Standard	6000-2Z	5972K322	0000
10 mm	26 mm	8 mm	3	1,050	34,000	-20	230	Standard	6000-2Z	6661K13	00000
10 mm	28 mm	8 mm	1	1,650	26,000	-20	230	Standard	16100-2Z	5972K268	00000
10 mm	30 mm	9 mm	1	1,550	26,000	-20	230	Standard	6200-2Z	5972K326	0000
10 mm	30 mm	9 mm	3	1,200	28,000	-20	230	Standard	6200-2Z	6661K41	00000
10 mm	35 mm	11 mm	3	1,900	26,000	-20	230	Standard	6300-2Z	6661K61	00000
12 mm	18 mm	4 mm	1	205	13,000	-40	150	Standard	6701-2Z	6656K172	00000
12 mm	21 mm	5 mm	1	430	33,000	-20	230	Standard	6801-2Z	5972K154	00000
12 mm	24 mm	6 mm	1	640	31,000	-20	230	Standard	6901-2Z	5972K165	0000
12 mm	28 mm	8 mm	1	1,100	26,000	-20	230	Standard	6001-2Z	5972K323	00000
12 mm	28 mm	8 mm	3	1,200	30,000	-20	230	Standard	6001-2Z	6661K14	00000
12 mm	32 mm	10 mm	1	1,550	24,000	-20	230	Standard	6201-2Z	5972K327	00000
12 mm	32 mm	10 mm	3	1,600	26,000	-20	230	Standard	6201-2Z	6661K42	00000
12 mm	37 mm	12 mm	1	2,150	20,000	-20	230	Standard	6301-2Z	5972K347	00000
12 mm	37 mm	12 mm	3	2,250	22,000	-20	230	Standard	6301-2Z	6661K62	00000
15 mm	21 mm	4 mm	1	210	11,000	-40	150	Standard	6702-2Z	6656K181	00000
15 mm	24 mm	5 mm	1	460	28,000	-20	230	Standard	6802-2Z	5972K155	00000
15 mm	24 mm	7 mm	1	460	28,000	-40	150	Standard	63802-2Z	6656K185	00000
15 mm	28 mm	7 mm	1	970	26,000	-20	230	Standard	6902-2Z	5972K166	0000
15 mm	32 mm	8 mm	1	1,300	33,500	-20	230	Standard	16002-2Z	5972K264	00000
15 mm	32 mm	9 mm	1	1,250	24,000	-20	230	Standard	6002-2Z	5972K324	00000
15 mm	32 mm	9 mm	3	1,300	26,000	-20	230	Standard	6002-2Z	6661K15	00000
15 mm	35 mm	11 mm	1	1,750	20,000	-20	230	Standard	6202-2Z	5972K328	0000
15 mm	35 mm	11 mm	3	1,800	22,000	-20	230	Standard	6202-2Z	6661K43	00000
15 mm	42 mm	13 mm	1	2,550	18,000	-20	230	Standard	6302-2Z	5972K348	0000
15 mm	42 mm	13 mm	3	2,650	19,000	-20	230	Standard	6302-2Z	6661K63	00000
17 mm	23 mm	4 mm	1	220	9,500	-40	150	Standard	6703-2Z	6656K189	00000
17 mm	26 mm	5 mm	1	500	26,000	-20	230	Standard	6803-2Z	5972K156	00000
17 mm	30 mm	7 mm	1	1,000	23,000	-20	230	Standard	6903-2Z	5972K167	00000
17 mm	35 mm	8 mm	1	1,400	31,000	-20	230	Standard	16003-2Z	5972K265	00000
17 mm	35 mm	10 mm	1	1,300	22,000	-20	230	Standard	6003-2Z	5972K325	0000
17 mm	35 mm	10 mm	3	1,400	22,000	-20	230	Standard	6003-2Z	6661K16	00000
17 mm	40 mm	12 mm	1	2,100	18,000	-20	230	Standard	6203-2Z	5972K2	0000
17 mm	40 mm	12 mm	3	2,200	19,000	-20	230	Standard	6203-2Z	6661K44	00000
17 mm	47 mm	14 mm	1	3,000	16,000	-20	230	Standard	6303-2Z	5972K349	00000
17 mm	47 mm	14 mm	3	3,200	17,000	-20	230	Standard	6303-2Z	6661K64	00000
20 mm	27 mm	4 mm	1	310	8,500	-40	150	Standard	6704-2Z	6656K198	00000
20 mm	32 mm	7 mm	1	900	21,000	-20	230	Standard	6804-2Z	5972K157	00000
20 mm	32 mm	10 mm	1	900	21,000	-40	150	Standard	63804-2Z	6656K203	00000
20 mm	37 mm	9 mm	1	1,400	19,000	-20	230	Standard	6904-2Z	5972K168	00000
20 mm	42 mm	8 mm	1	1,550	14,000	-20	230	Standard	16004-2Z	5972K266	00000
20 mm	42 mm	12 mm	3	2,200	19,000	-20	230	Standard	6004-2Z	6661K17	00000
20 mm	47 mm	14 mm	1	2,850	15,000	-20	230	Standard	6204-2Z	5972K329	00000
20 mm	47 mm	14 mm	3	3,000	17,000	-20	230	Standard	6204-2Z	6661K45	00000
20 mm	52 mm	15 mm	1	3,550	14,000	-20	230	Standard	6304-2Z	5972K351	00000
20 mm	52 mm	15 mm	3	3,750	15,000	-20	230	Standard	6304-2Z	6661K65	00000
25 mm	37 mm	7 mm	1	960	18,000	-20	230	Standard	6805-2Z	5972K158	00000
25 mm	42 mm	9 mm	1	1,550	16,000	-20	230	Standard	6905-2Z	5972K169	00000
25 mm	47 mm	8 mm	1	1,700	22,500	-20	230	Standard	16005-2Z	5972K267	00000
25 mm	47 mm	12 mm	3	2,650	16,000	-20	230	Standard	6005-2Z	6661K18	00000
25 mm	52 mm	15 mm	1	3,100	14,000	-20	230	Standard	6205-2Z	5972K341	00000
25 mm	52 mm	15 mm	3	3,300	14,000	-20	230	Standard	6205-2Z	6661K46	00000
25 mm	62 mm	17 mm	1	5,000	11,000	-20	230	Standard	6305-2Z	5972K352	00000
25 mm	62 mm	17 mm	3	5,250	13,000	-20	230	Standard	6305-2Z	6661K66	00000
30 mm	42 mm	7 mm	1	1,000	15,000	-20	230	Standard	6806-2Z	5972K159	00000
30 mm	47 mm	9 mm	1	1,600	14,000	-20	230	Standard	6906-2Z	5972K171	00000
30 mm	55 mm	13 mm	3	3,100	14,000	-20	230	Standard	6006-2Z	6661K19	00000
30 mm	62 mm	16 mm	1	4,300	11,000	-20	230	Standard	6206-2Z	5972K342	00000
30 mm	62 mm	16 mm	3	4,550	12,000	-20	230	Standard	6206-2Z	6661K47	00000
30 mm	72 mm	19 mm	1	6,500	9,500	-20	230	Standard	6306-2Z	5972K353	00000
30 mm	72 mm	19 mm	3	6,650	11,000	-20	230	Standard	6306-2Z	6661K67	00000
35 mm	47 mm	7 mm	1	1,050	13,000	-40	150	Standard	6807-2Z	6656K216	00000
35 mm	55 mm	10 mm	1	2,450	12,000	-20	230	Standard	6907-2Z	5972K172	00000
35 mm	62 mm	14 mm	1	3,000	11,000	-20	230	Standard	6007-2Z	5972K365	00000
35 mm	62 mm	14 mm	3	3,750	12,000	-20	230	Standard	6007-2Z	4481N16	00000
35 mm	72 mm	17 mm	1	5,700	9,500	-20	230	Standard	6207-2Z	5972K343	00000
35 mm	72 mm	17 mm	3	6,050	10,000	-20	230	Standard	6207-2Z	6661K48	00000
35 mm	80 mm	21 mm	1	7,950	8,500	-20	230	Standard	6307-2Z	5972K354	00000
35 mm	80 mm	21 mm	3	7,850	9,500	-20	230	Standard	6307-2Z	6661K68	00000
40 mm	52 mm	7 mm	1	1,100	12,000	-40	150	Standard	6808-2Z	6656K221	00000
40 mm	62 mm	12 mm	1	3,050	11,000	-20	230	Standard	6908-2Z	5972K173	00000
40 mm	68 mm	15 mm	1	4,000	12,000	-20	230	Standard	6008-2Z	5972K269	00000
40 mm	68 mm	15 mm	3	4,000	11,000	-20	230	Standard	6008-2Z	4481N17	00000
40 mm	80 mm	18 mm	1	6,500	8,500	-20	230	Standard	6208-2Z	5972K344	00000
40 mm	80 mm	18 mm	3	7,300	9,000	-20	230	Standard	6208-2Z	6661K49	00000
40 mm	90 mm	23 mm	1	9,550	7,500	-20	230	Standard	6308-2Z	5972K355	00000
40 mm	90 mm	23 mm	3	9,500	8,500	-20	230	Standard	6308-2Z	6661K69	000000
45 mm	58 mm	7 mm	1	1,350	11,000	-40	150	Standard	6809-2Z	6656K225	00000
45 mm	68 mm	12 mm	1	3,150	9,700	-40	150	Standard	6909-2Z	6656K227	00000
45 mm	75 mm	16 mm	1	4,750	11,000	-20	230	Standard	6009-2Z	5972K271	00000
45 mm	75 mm	16 mm	3	4,950	10,000	-20	230	Standard	6009-2Z	4481N18	00000
45 mm	85 mm	19 mm	1	6,950	8,000	-20	230	Standard	6209-2Z	5972K345	00000
45 mm	85 mm	19 mm	3	7,850	8,500	-20	230	Standard	6209-2Z	6661K51	00000
45 mm	100 mm	25 mm	1	11,900	6,700	-20	230	Standard	6309-2Z	5972K356	00000
45 mm	100 mm	25 mm	3	12,400	7,500	-20	230	Standard	6309-2Z	6661K71	000000
50 mm	65 mm	7 mm	1	1,450	9,600	-40	150	Standard	6810-2Z	6656K229	00000
50 mm	72 mm	12 mm	1	3,250	9,000	-40	150	Standard	6910-2Z	6656K232	00000
50 mm	80 mm	16 mm	1	4,900	10,000	-20	230	Standard	6010-2Z	5972K272	00000
50 mm	80 mm	16 mm	3	5,150	9,000	-20	230	Standard	6010-2Z	4481N19	000000
50 mm	90 mm	20 mm	1	6,650	7,100	-20	230	Standard	6210-2Z	5972K366	00000
50 mm	90 mm	20 mm	3	8,300	8,000	-20	230	Standard	6210-2Z	6661K52	000000
50 mm	110 mm	27 mm	1	13,900	6,000	-20	230	Standard	6310-2Z	5972K332	00000
50 mm	110 mm	27 mm	3	14,600	6,700	-20	230	Standard	6310-2Z	4481N49	000000
55 mm	72 mm	9 mm	1	1,950	8,700	-40	150	Standard	6811-2Z	6656K234	00000
55 mm	80 mm	13 mm	1	3,700	8,700	-40	150	Standard	6911-2Z	6656K235	00000
55 mm	90 mm	18 mm	1	6,700	9,100	-20	230	Standard	6011-2Z	5972K273	000000
55 mm	90 mm	18 mm	3	6,650	8,000	-20	230	Standard	6011-2Z	4481N21	000000
55 mm	100 mm	21 mm	1	9,750	6,300	-20	230	Standard	6211-2Z	5972K367	00000
55 mm	100 mm	21 mm	3	10,350	7,000	-20	230	Standard	6211-2Z	4481N37	000000
55 mm	120 mm	29 mm	1	16,000	5,600	-20	230	Standard	6311-2Z	5972K361	00000
55 mm	120 mm	29 mm	3	16,650	6,300	-20	230	Standard	6311-2Z	4481N51	000000
60 mm	78 mm	10 mm	1	2,550	8,000	-40	150	Standard	6812-2Z	6656K236	00000
60 mm	85 mm	13 mm	1	4,500	7,500	-40	150	Standard	6912-2Z	6656K237	00000
60 mm	95 mm	18 mm	1	7,050	8,500	-20	230	Standard	6012-2Z	5972K274	000000
60 mm	95 mm	18 mm	3	6,900	7,500	-20	230	Standard	6012-2Z	4481N22	000000
60 mm	110 mm	22 mm	1	11,600	6,000	-20	230	Standard	6212-2Z	5972K346	00000
60 mm	110 mm	22 mm	3	12,400	6,300	-20	230	Standard	6212-2Z	4481N38	000000
60 mm	130 mm	31 mm	1	18,400	5,300	-20	230	Standard	6312-2Z	5972K362	00000
60 mm	130 mm	31 mm	3	19,150	5,600	-20	230	Standard	6312-2Z	4481N52	000000
65 mm	85 mm	10 mm	1	2,650	7,300	-40	150	Standard	6813-2Z	6656K238	00000
65 mm	100 mm	18 mm	1	7,300	8,100	-20	230	Standard	6013-2Z	5972K301	000000
65 mm	100 mm	18 mm	3	7,150	7,000	-20	230	Standard	6013-2Z	4481N23	000000
65 mm	120 mm	23 mm	3	13,150	6,000	-20	230	Standard	6213-2Z	4481N39	000000
65 mm	140 mm	33 mm	3	21,900	5,300	-20	230	Standard	6313-2Z	4481N53	000000
70 mm	90 mm	10 mm	1	2,700	6,800	-40	150	Standard	6814-2Z	6656K241	00000
70 mm	110 mm	20 mm	1	9,100	7,300	-20	230	Standard	6014-2Z	5972K302	000000
70 mm	110 mm	20 mm	3	8,900	6,300	-20	230	Standard	6014-2Z	4481N24	000000
70 mm	125 mm	24 mm	3	14,300	5,600	-20	230	Standard	6214-2Z	4481N41	000000
70 mm	150 mm	35 mm	3	24,900	5,000	-20	230	Standard	6314-2Z	4481N54	000000
75 mm	95 mm	10 mm	1	2,800	12,500	-40	150	Standard	6815-2Z	6656K243	000000
75 mm	115 mm	20 mm	1	9,400	6,900	-20	230	Standard	6015-2Z	5972K303	000000
75 mm	115 mm	20 mm	3	9,350	6,000	-20	230	Standard	6015-2Z	4481N25	000000
75 mm	130 mm	25 mm	3	15,450	5,300	-20	230	Standard	6215-2Z	4481N42	000000
75 mm	160 mm	37 mm	3	26,700	4,500	-20	230	Standard	6315-2Z	4481N55	000000
80 mm	100 mm	10 mm	1	2,850	12,700	-40	150	Standard	6816-2Z	6656K245	000000
80 mm	125 mm	22 mm	1	11,400	6,300	-20	230	Standard	6016-2Z	5972K304	000000
80 mm	125 mm	22 mm	3	11,100	5,600	-20	230	Standard	6016-2Z	4481N26	000000
80 mm	140 mm	26 mm	3	16,350	4,800	-20	230	Standard	6216-2Z	4481N43	000000
80 mm	170 mm	39 mm	3	29,200	4,300	-20	230	Standard	6316-2Z	4481N56	000000
85 mm	130 mm	22 mm	1	11,900	6,100	-20	230	Standard	6017-2Z	5972K305	000000
85 mm	130 mm	22 mm	3	11,650	5,300	-20	230	Standard	6017-2Z	4481N27	000000
85 mm	150 mm	28 mm	3	19,550	4,500	-20	230	Standard	6217-2Z	4481N44	000000
85 mm	180 mm	41 mm	3	31,450	4,000	-20	230	Standard	6317-2Z	4481N57	000000
90 mm	115 mm	13 mm	1	4,250	5,300	-40	150	Standard	6818-2Z	6656K249	000000
90 mm	140 mm	24 mm	3	13,600	5,000	-20	230	Standard	6018-2Z	4481N28	000000
90 mm	160 mm	30 mm	3	22,700	4,300	-20	230	Standard	6218-2Z	4481N45	000000
90 mm	190 mm	43 mm	3	33,900	3,800	-20	230	Standard	6318-2Z	4481N58	000000
120 mm	180 mm	28 mm	3	19,850	3,800	-20	230	Standard	6024-2Z	4481N29	000000



		Corrosion-Resistant 440C Stainless Steel

		3/64"	5/32"	3/32"	5	30	120,000	-40	240	Standard	R0-2Z	57155K359	0000


		0.055"	3/16"	7/64"	5	50	110,000	-40	240	Standard	R1-2Z	57155K361	0000
		0.055"	3/16"	7/64"	5	50	110,000	-40	240	Extended	R1-2Z	57155K12	00000
		5/64"	1/4"	9/64"	5	70	80,000	-40	240	Standard	R1-4-2Z	57155K362	0000
		5/64"	1/4"	9/64"	5	70	80,000	-40	240	Extended	R1-4-2Z	57155K379	0000
		3/32"	3/16"	3/32"	5	30	95,000	-40	240	Standard	R133-2Z	57155K363	0000
		3/32"	3/16"	3/32"	5	30	95,000	-40	240	Extended	R133-2Z	57155K13	00000
		3/32"	5/16"	9/64"	5	120	71,000	-40	240	Standard	R1-5-2Z	57155K364	0000
		3/32"	5/16"	9/64"	5	120	71,000	-40	240	Extended	R1-5-2Z	57155K381	0000
		1/8"	1/4"	7/64"	5	60	80,000	-40	240	Standard	R144-2Z	57155K365	0000
		1/8"	1/4"	7/64"	5	60	80,000	-40	240	Extended	R144-2Z	57155K382	0000


		1/8"	5/16"	9/64"	5	120	71,000	-40	240	Standard	R2-5-2Z	57155K366	0000
		1/8"	5/16"	9/64"	5	120	71,000	-40	240	Extended	R2-5-2Z	57155K383	0000
		1/8"	3/8"	9/64"	5	140	63,000	-40	240	Standard	R2-6-2Z	57155K367	0000
		1/8"	3/8"	9/64"	5	140	63,000	-40	240	Extended	R2-6-2Z	57155K14	0000
		1/8"	3/8"	5/32"	1	110	56,000	-40	240	Standard	R2-2Z	6138K52	0000
		1/8"	3/8"	5/32"	5	140	67,000	-10	240	Standard	R2-2Z	57155K368	0000
		1/8"	1/2"	11/64"	5	140	63,000	-40	240	Standard	R2A-2Z	57155K369	0000
		5/32"	5/16"	1/8"	5	80	63,000	-40	240	Standard	R155-2Z	57155K371	0000
		5/32"	5/16"	1/8"	5	80	63,000	-40	240	Extended	R155-2Z	57155K15	0000
		3/16"	5/16"	1/8"	5	80	63,000	-40	240	Standard	R156-2Z	57155K372	0000


		3/16"	5/16"	1/8"	5	80	63,000	-40	240	Extended	R156-2Z	57155K16	0000
		3/16"	3/8"	1/8"	5	160	60,000	-40	240	Standard	R166-2Z	57155K373	0000
		3/16"	3/8"	1/8"	5	160	60,000	-40	240	Extended	R166-2Z	57155K384	0000
		3/16"	1/2"	0.196"	1	230	43,000	-40	240	Standard	R3-2Z	6138K53	0000
		3/16"	1/2"	0.196"	5	290	50,000	-40	240	Extended	R3-2Z	57155K385	0000
		3/16"	1/2"	0.196"	5	290	50,000	-10	240	Standard	R3-2Z	57155K374	0000
		1/4"	3/8"	1/8"	5	80	56,000	-40	240	Standard	R168-2Z	57155K375	0000
		1/4"	3/8"	1/8"	5	80	56,000	-40	240	Extended	R168-2Z	57155K386	0000
		1/4"	1/2"	3/16"	5	240	50,000	-40	240	Standard	R188-2Z	57155K376	0000
		1/4"	1/2"	3/16"	5	240	50,000	-40	240	Extended	R188-2Z	57155K387	0000


		1/4"	5/8"	0.196"	1	260	38,000	-40	240	Standard	R4-2Z	6138K54	0000
		1/4"	5/8"	0.196"	5	330	45,000	-40	240	Extended	R4-2Z	57155K388	0000
		1/4"	5/8"	0.196"	5	330	45,000	-10	240	Standard	R4-2Z	57155K377	0000
		5/16"	1/2"	5/32"	5	120	48,000	-40	240	Standard	R1810-2Z	57155K378	0000
		5/16"	1/2"	5/32"	5	120	48,000	-40	240	Extended	R1810-2Z	57155K389	0000
		3/8"	7/8"	9/32"	1	590	32,000	-40	240	Standard	R6-2Z	6138K24	0000
		1/2"	1 1/8"	5/16"	1	910	27,000	-40	240	Standard	R8-2Z	6138K25	00000
		5/8"	1 3/8"	11/32"	1	1,050	21,000	-40	240	Standard	R10-2Z	6138K26	00000
		3/4"	1 5/8"	7/16"	1	1,650	17,000	-40	240	Standard	R12-2Z	6138K71	00000
		1"	2"	1/2"	1	1,650	9,900	-20	210	Standard	R16-2Z	6138K103	00000


		1 1/4"	2 1/4"	1/2"	1	2,150	9,200	-20	210	Standard	R20-2Z	6138K106	000000
		2 mm	5 mm	2.5 mm	5	35	100,000	-40	240	Standard	52-2Z	7804K119	0000
		2 mm	6 mm	3 mm	5	70	90,000	-40	240	Standard	692-2Z	7804K121	0000
		3 mm	6 mm	2.5 mm	5	45	80,000	-40	240	Standard	63-2Z	7804K124	0000
		3 mm	7 mm	3 mm	5	70	75,000	-40	240	Standard	683-2Z	7804K125	0000
		3 mm	8 mm	4 mm	5	120	67,000	-40	240	Standard	693-2Z	7804K126	0000
		3 mm	10 mm	4 mm	5	140	56,000	-40	240	Standard	623-2Z	7804K128	0000
		4 mm	10 mm	4 mm	5	130	56,000	-40	240	Standard	104-2Z	7804K1	0000
		4 mm	11 mm	4 mm	5	210	53,000	-40	240	Standard	694-2Z	7804K101	0000
4 mm		12 mm	4 mm	5	210	53,000	-40	240	Standard	604-2Z	7804K102	0000
4 mm	13 mm	5 mm	5	290	48,000	-40	240	Standard	624-2Z	7804K103	0000
5 mm	8 mm	2.5 mm	5	65	63,000	-40	240	Standard	85-2Z	7804K104	0000
5 mm	9 mm	3 mm	5	95	60,000	-40	240	Standard	95-2Z	7804K105	0000
5 mm	10 mm	4 mm	5	95	60,000	-40	240	Standard	105-2Z	7804K106	0000
5 mm	11 mm	4 mm	5	160	53,000	-40	240	Standard	115-2Z	7804K107	0000
5 mm	13 mm	4 mm	5	240	50,000	-40	240	Standard	695-2Z	7804K108	0000
5 mm	14 mm	5 mm	5	290	48,000	-40	240	Standard	605-2Z	7804K109	0000
5 mm	16 mm	5 mm	3	310	36,000	-40	240	Standard	625-2Z	6153K15	00000
6 mm	10 mm	3 mm	5	110	53,000	-40	240	Standard	106-2Z	7804K111	0000
6 mm	12 mm	4 mm	5	160	50,000	-40	240	Standard	126-2Z	7804K112	0000
6 mm	13 mm	5 mm	5	240	48,000	-40	240	Standard	686-2Z	7804K113	0000
6 mm	19 mm	6 mm	3	440	38,000	-40	240	Standard	626-2Z	6153K26	00000
7 mm	14 mm	5 mm	5	260	45,000	-40	240	Standard	687-2Z	7804K114	0000
7 mm	22 mm	7 mm	3	590	30,000	-40	240	Standard	627-2Z	6153K27	00000
8 mm	12 mm	3.5 mm	5	120	48,000	-40	240	Standard	128-2Z	7804K115	0000
8 mm	14 mm	4 mm	5	180	45,000	-40	240	Standard	148-2Z	7804K116	0000
8 mm	16 mm	5 mm	5	280	43,000	-40	240	Standard	688-2Z	7804K117	0000
8 mm	19 mm	6 mm	3	400	36,000	-40	240	Standard	698-2Z	6153K22	00000
8 mm	22 mm	7 mm	3	590	34,000	-40	240	Standard	608-2Z	6153K51	00000
9 mm	17 mm	5 mm	5	290	43,000	-40	240	Standard	689-2Z	7804K118	0000
9 mm	24 mm	7 mm	3	600	32,000	-40	240	Standard	609-2Z	6153K12	00000
9 mm	26 mm	8 mm	3	820	28,000	-40	240	Standard	629-2Z	6153K53	00000
10 mm	15 mm	4 mm	1	190	15,000	-40	150	Standard	6700-2Z	6656K164	00000
10 mm	19 mm	5 mm	1	380	37,000	-40	150	Standard	6800-2Z	6656K166	00000
10 mm	19 mm	7 mm	1	380	37,000	-40	150	Standard	63800-2Z	6656K168	00000
10 mm	22 mm	6 mm	1	600	34,000	-40	150	Standard	6900-2Z	6656K171	00000
10 mm	26 mm	8 mm	1	870	28,000	-40	240	Standard	6000-2Z	6153K151	00000
10 mm	30 mm	9 mm	1	780	24,000	-40	240	Standard	6200-2Z	6153K54	00000
10 mm	35 mm	11 mm	1	1,500	23,000	-40	240	Standard	6300-2Z	6153K152	00000
12 mm	18 mm	4 mm	1	205	13,000	-40	150	Standard	6701-2Z	6656K173	00000
12 mm	24 mm	6 mm	1	640	31,000	-40	150	Standard	6901-2Z	6656K179	00000
12 mm	28 mm	8 mm	1	970	25,000	-40	240	Standard	6001-2Z	6153K153	00000
12 mm	32 mm	10 mm	1	1,000	22,000	-40	240	Standard	6201-2Z	6153K55	00000
12 mm	37 mm	12 mm	1	1,850	22,000	-40	240	Standard	6301-2Z	6153K154	00000
15 mm	21 mm	4 mm	1	210	11,000	-40	150	Standard	6702-2Z	6656K182	00000
15 mm	32 mm	9 mm	1	1,050	22,000	-40	240	Standard	6002-2Z	6153K155	00000
15 mm	35 mm	11 mm	1	1,150	20,000	-40	240	Standard	6202-2Z	6153K56	00000
15 mm	42 mm	13 mm	1	2,150	18,000	-40	240	Standard	6302-2Z	6153K156	00000
17 mm	23 mm	4 mm	1	220	9,500	-40	150	Standard	6703-2Z	6656K191	00000
17 mm	30 mm	7 mm	1	1,000	23,000	-40	150	Standard	6903-2Z	6656K197	00000
17 mm	35 mm	10 mm	1	1,100	20,000	-40	240	Standard	6003-2Z	6153K157	00000
17 mm	40 mm	12 mm	1	1,450	17,000	-40	240	Standard	6203-2Z	6153K57	00000
17 mm	47 mm	14 mm	1	2,600	16,000	-40	240	Standard	6303-2Z	6153K158	00000
20 mm	42 mm	12 mm	1	1,750	17,000	-40	240	Standard	6004-2Z	6153K159	00000
20 mm	47 mm	14 mm	1	1,950	15,000	-40	240	Standard	6204-2Z	6153K58	00000
20 mm	52 mm	15 mm	1	3,000	15,000	-40	240	Standard	6304-2Z	6153K161	000000
25 mm	37 mm	7 mm	1	960	18,000	-40	150	Standard	6805-2Z	6656K207	00000
25 mm	42 mm	9 mm	1	1,550	16,000	-40	150	Standard	6905-2Z	6656K211	00000
25 mm	47 mm	12 mm	1	1,900	15,000	-40	240	Standard	6005-2Z	6153K162	00000
25 mm	52 mm	15 mm	1	2,100	13,000	-40	240	Standard	6205-2Z	6153K59	00000
25 mm	62 mm	17 mm	1	3,900	12,000	-40	240	Standard	6305-2Z	6153K163	000000
30 mm	42 mm	7 mm	1	1,000	15,000	-40	150	Standard	6806-2Z	6656K213	00000
30 mm	55 mm	13 mm	1	2,500	13,000	-40	240	Standard	6006-2Z	6153K164	00000
30 mm	62 mm	16 mm	1	2,950	11,000	-40	240	Standard	6206-2Z	6153K61	00000
30 mm	72 mm	19 mm	1	5,100	11,000	-40	240	Standard	6306-2Z	6153K165	000000
35 mm	47 mm	7 mm	1	1,050	13,000	-40	150	Standard	6807-2Z	6656K217	00000
35 mm	62 mm	14 mm	1	3,050	11,000	-40	240	Standard	6007-2Z	6153K166	000000
35 mm	72 mm	17 mm	1	4,900	10,000	-40	240	Standard	6207-2Z	6153K167	000000
35 mm	80 mm	21 mm	1	6,350	9,400	-40	240	Standard	6307-2Z	6153K168	000000
40 mm	68 mm	15 mm	1	3,200	10,000	-40	240	Standard	6008-2Z	6153K169	000000
40 mm	80 mm	18 mm	1	4,000	9,100	-40	240	Standard	6208-2Z	6153K171	000000
50 mm	80 mm	16 mm	1	3,000	8,400	-40	240	Standard	6010-2Z	6153K174	000000

Sealed







				Steel

				1/8"	3/8"	5/32"	1	140	56,000	-20	230	Standard	R2-2RS	60355K851	0000


				3/16"	1/2"	0.196"	1	290	43,000	-20	230	Standard	R3-2RS	60355K861	0000
				3/16"	11/16"	5/16"	Not Rated	250	2,500	-20	250	Standard	3001-2RS	6384K88	00000
				1/4"	5/8"	0.196"	1	330	21,000	-58	302	Standard	R4-2RS	60355K336	0000
				1/4"	11/16"	5/16"	Not Rated	250	2,500	-20	250	Standard	3002-2RS	6384K39	00000
				1/4"	11/16"	5/16"	Not Rated	510	5,000	-20	250	Standard	1602-2RS	2780T51	00000
				1/4"	3/4"	9/32"	1	520	19,000	-58	302	Standard	R4A-2RS	60355K363	00000
				5/16"	7/8"	11/32"	Not Rated	320	2,500	-20	250	Standard	3003-2RS	6384K41	00000
				5/16"	7/8"	11/32"	Not Rated	640	5,000	-20	250	Standard	1603-2RS	2780T52	00000
				5/16"	29/32"	5/16"	Not Rated	350	2,500	-20	250	Standard	3005-2RS	6384K22	00000
				5/16"	29/32"	5/16"	Not Rated	690	5,000	-20	250	Standard	1605-2RS	2780T54	00000


				3/8"	7/8"	9/32"	1	740	15,500	-58	302	Standard	R6-2RS	60355K671	0000
				3/8"	7/8"	11/32"	Not Rated	320	2,500	-20	250	Standard	3004-2RS	6384K23	00000
				3/8"	7/8"	11/32"	Not Rated	640	5,000	-20	250	Standard	1604-2RS	2780T53	00000
				3/8"	29/32"	5/16"	Not Rated	350	2,500	-20	250	Standard	3006-2RS	6384K44	00000
				3/8"	29/32"	5/16"	Not Rated	690	5,000	-20	250	Standard	1606-2RS	2780T55	00000
				3/8"	1 1/8"	3/8"	Not Rated	600	2,500	-20	250	Standard	3014-2RS	6384K45	00000
				3/8"	1 1/8"	3/8"	Not Rated	1,200	5,000	-20	250	Standard	1614-2RS	2780T57	00000
				Steel Ball Bearing, Trade No. 1614-2RS, Sealed, for 3/8" Shaft Diameter Product Detail QuantityEachIn stock Select a compatible file type: Parasolid Compatible Products for This Ball Bearing
				7/16"	29/32"	5/16"	Not Rated	350	2,500	-20	250	Standard	3007-2RS	6384K46	00000
				7/16"	29/32"	5/16"	Not Rated	690	5,000	-20	250	Standard	1607-2RS	2780T56	00000
				7/16"	1 1/8"	3/8"	Not Rated	600	2,500	-20	250	Standard	3015-2RS	6384K47	00000


				7/16"	1 1/8"	3/8"	Not Rated	1,200	5,000	-20	250	Standard	1615-2RS	2780T74	00000
				7/16"	1 3/8"	7/16"	Not Rated	940	2,500	-20	250	Standard	3020-2RS	6384K48	00000
				7/16"	1 3/8"	7/16"	Not Rated	1,850	5,000	-20	250	Standard	1620-2RS	2780T75	00000
				1/2"	1 1/8"	5/16"	1	1,140	13,500	-58	302	Standard	R8-2RS	60355K691	00000
				1/2"	1 1/8"	3/8"	Not Rated	600	2,500	-20	250	Standard	3016-2RS	6384K49	00000
				1/2"	1 1/8"	3/8"	Not Rated	1,200	5,000	-20	250	Standard	1616-2RS	2780T58	00000
				1/2"	1 3/8"	7/16"	Not Rated	940	2,500	-20	250	Standard	3021-2RS	6384K74	00000
				1/2"	1 3/8"	7/16"	Not Rated	1,850	5,000	-20	250	Standard	1621-2RS	2780T59	00000
				1/2"	1 3/4"	5/8"	Not Rated	2,550	5,000	-20	250	Extended	7508-2RS	2782T71	00000
				9/16"	1 3/8"	7/16"	Not Rated	940	2,500	-20	250	Standard	3022-2RS	6384K75	00000


				5/8"	1 3/8"	11/32"	1	1,340	10,000	-58	302	Standard	R10-2RS	60355K733	00000
				5/8"	1 3/8"	7/16"	Not Rated	940	2,500	-20	250	Standard	3023-2RS	6384K76	00000
				5/8"	1 3/8"	7/16"	Not Rated	1,850	5,000	-20	250	Standard	1623-2RS	2780T61	00000
				5/8"	1 5/8"	1/2"	Not Rated	1,300	2,500	-20	250	Standard	3028-2RS	6384K77	00000
				5/8"	1 5/8"	1/2"	Not Rated	2,550	5,000	-20	250	Standard	1628-2RS	2780T62	00000
				5/8"	1 3/4"	1/2"	Not Rated	2,550	5,000	-20	250	Standard	1633-2RS	2780T64	00000
				5/8"	1 3/4"	5/8"	Not Rated	2,550	5,000	-20	250	Extended	7510-2RS	2782T73	00000
				3/4"	1 5/8"	7/16"	1	1,630	8,500	-58	302	Standard	R12-2RS	60355K983	00000
				3/4"	1 5/8"	1/2"	Not Rated	1,300	2,500	-20	250	Standard	3030-2RS	6384K79	00000
				3/4"	1 5/8"	1/2"	Not Rated	2,550	5,000	-20	250	Standard	1630-2RS	2780T63	00000


				3/4"	1 3/4"	1/2"	Not Rated	1,300	2,500	-20	250	Standard	3035-2RS	6384K81	00000
				3/4"	1 3/4"	1/2"	Not Rated	2,550	5,000	-20	250	Standard	1635-2RS	2780T3	00000
				3/4"	1 3/4"	5/8"	Not Rated	2,550	5,000	-20	250	Extended	7512-2RS	2782T75	00000
3/4"				2"	9/16"	Not Rated	1,450	2,500	-20	250	Standard	3038-2RS	6384K82	00000
3/4"	2"			9/16"	Not Rated	2,950	5,000	-20	250	Standard	1638-2RS	2780T65	00000
7/8"	1 7/8"			1/2"	1	2,250	9,000	-20	230	Standard	R14-2RS	60355K707	00000
7/8"	2"			9/16"	Not Rated	1,450	2,500	-20	250	Standard	3040-2RS	6384K83	00000
7/8"	2"			9/16"	Not Rated	2,950	5,000	-20	250	Standard	1640-2RS	2780T76	00000
1"	2"	1/2"		1	2,400	9,000	-20	230	Standard	R16-2RS	60355K708	00000
1"	2"	9/16"	Not Rated	1,450	2,500	-20	250	Standard	3041-2RS	6384K84	00000
1"	2"	9/16"	Not Rated	2,950	5,000	-20	250	Standard	1641-2RS	2780T66	00000
1"	2"	5/8"	Not Rated	2,950	5,000	-20	250	Extended	7516-2RS	2782T77	00000
1 1/8"	2 1/2"	5/8"	Not Rated	3,850	5,000	-20	250	Standard	1652-2RS	2780T67	00000
1 1/4"	2 1/4"	1/2"	1	3,150	7,500	-20	230	Standard	R20-2RS	3760T254	000000
1 1/4"	2 1/2"	5/8"	Not Rated	3,850	5,000	-20	250	Standard	1654-2RS	2780T68	00000
1 1/4"	2 9/16"	11/16"	Not Rated	5,350	5,000	-20	250	Standard	1657-2RS	2780T69	00000
1 1/4"	2 9/16"	3/4"	Not Rated	5,350	5,000	-20	250	Extended	7520-2RS	2782T79	00000
1 1/2"	3 5/16"	13/16"	Not Rated	6,189	5,000	-20	250	Standard	1660-2RS	2780T78	00000
1 3/4"	3 5/16"	13/16"	Not Rated	6,189	5,000	-20	250	Standard	1662-2RS	2780T82	00000
3 mm	10 mm	4 mm	3	120	40,000	-30	210	Standard	623-2RS	4481N77	00000
4 mm	13 mm	5 mm	3	210	32,000	-30	210	Standard	624-2RS	4481N78	00000
5 mm	16 mm	5 mm	3	260	28,000	-30	210	Standard	625-2RS	4481N79	00000
6 mm	19 mm	6 mm	3	520	24,000	-20	210	Standard	626-2RS	6661K81	00000
7 mm	19 mm	6 mm	1	580	22,000	-20	230	Standard	607-2RS	5972K225	00000
7 mm	22 mm	7 mm	1	730	20,000	-20	230	Standard	627-2RS	5972K502	0000
8 mm	22 mm	7 mm	1	730	20,000	-20	230	Standard	608-2RS	5972K222	00000
8 mm	22 mm	7 mm	3	770	22,000	-30	210	Standard	608-2RS	6661K82	00000
9 mm	26 mm	8 mm	1	1,000	19,000	-20	230	Standard	629-2RS	5972K231	0000
10 mm	19 mm	5 mm	1	380	37,000	-20	230	Standard	6800-2RS	5972K275	0000
10 mm	22 mm	6 mm	1	600	34,000	-20	230	Standard	6900-2RS	5972K286	0000
10 mm	26 mm	8 mm	1	1,000	18,300	-20	230	Standard	6000-2RS	5972K81	00000
10 mm	26 mm	8 mm	3	1,050	19,000	-30	210	Standard	6000-2RS	6661K83	00000
10 mm	30 mm	9 mm	1	1,550	16,100	-20	230	Standard	6200-2RS	5972K41	0000
10 mm	30 mm	9 mm	3	1,200	17,000	-30	210	Standard	6200-2RS	6661K101	00000
10 mm	30 mm	14 mm	1	1,400	17,000	-20	230	Standard	62200-2RS	5972K228	00000
10 mm	35 mm	11 mm	3	1,900	15,000	-20	210	Standard	6300-2RS	6661K121	00000
12 mm	21 mm	5 mm	1	430	33,000	-20	230	Standard	6801-2RS	5972K276	0000
12 mm	24 mm	6 mm	1	640	31,000	-20	230	Standard	6901-2RS	5972K287	0000
12 mm	28 mm	8 mm	1	1,100	16,100	-20	230	Standard	6001-2RS	5972K82	0000
12 mm	28 mm	8 mm	3	1,200	17,000	-30	210	Standard	6001-2RS	6661K84	00000
12 mm	32 mm	10 mm	1	1,550	14,600	-20	230	Standard	6201-2RS	5972K42	00000
12 mm	32 mm	10 mm	3	1,600	15,000	-30	210	Standard	6201-2RS	6661K102	00000
12 mm	32 mm	14 mm	1	1,600	16,000	-20	230	Standard	62201-2RS	5972K229	00000
12 mm	37 mm	12 mm	1	2,150	13,000	-20	230	Standard	6301-2RS	5972K86	00000
12 mm	37 mm	12 mm	3	2,250	14,000	-30	210	Standard	6301-2RS	6661K122	00000
15 mm	24 mm	5 mm	1	460	28,000	-20	230	Standard	6802-2RS	5972K277	0000
15 mm	28 mm	7 mm	1	970	26,000	-20	230	Standard	6902-2RS	5972K288	0000
15 mm	32 mm	9 mm	1	1,250	13,300	-20	230	Standard	6002-2RS	5972K83	00000
15 mm	32 mm	9 mm	3	1,300	14,000	-30	210	Standard	6002-2RS	6661K85	00000
15 mm	35 mm	11 mm	3	1,800	13,000	-30	210	Standard	6202-2RS	6661K103	00000
15 mm	35 mm	11 mm	3	2,000	19,400	-4	212	Standard	6202-2RS	5972K368	0000
15 mm	35 mm	14 mm	1	1,800	14,000	-20	230	Standard	62202-2RS	5972K232	00000
15 mm	42 mm	13 mm	1	2,980	17,700	-4	230	Standard	6302-2RS	5972K987	00000
15 mm	42 mm	13 mm	3	2,650	12,000	-30	210	Standard	6302-2RS	6661K123	00000
15 mm	42 mm	17 mm	1	2,650	12,000	-20	230	Standard	62302-2RS	5972K233	00000
17 mm	26 mm	5 mm	1	500	26,000	-20	230	Standard	6803-2RS	5972K278	0000
17 mm	30 mm	7 mm	1	1,000	23,000	-20	230	Standard	6903-2RS	5972K289	0000
17 mm	35 mm	10 mm	1	1,300	11,800	-20	230	Standard	6003-2RS	5972K84	00000
17 mm	35 mm	10 mm	3	1,400	13,000	-30	210	Standard	6003-2RS	6661K86	00000
17 mm	40 mm	12 mm	1	2,100	11,100	-20	230	Standard	6203-2RS	5972K44	0000
17 mm	40 mm	12 mm	3	2,200	12,000	-30	210	Standard	6203-2RS	6661K104	00000
17 mm	47 mm	14 mm	1	3,230	15,700	-4	230	Standard	6303-2RS	5972K55	00000
17 mm	47 mm	14 mm	3	3,200	11,000	-30	210	Standard	6303-2RS	6661K124	00000
17 mm	62 mm	17 mm	1	5,350	16,000	-20	230	Standard	6403-2RS	5972K226	00000
20 mm	32 mm	7 mm	1	900	21,000	-20	230	Standard	6804-2RS	5972K279	0000
20 mm	37 mm	9 mm	1	1,400	19,000	-20	230	Standard	6904-2RS	5972K291	0000
20 mm	42 mm	12 mm	3	2,200	11,000	-20	210	Standard	6004-2RS	6661K87	00000
20 mm	47 mm	14 mm	1	3,300	14,500	-4	230	Standard	6204-2RS	5972K945	00000
20 mm	47 mm	14 mm	3	3,000	10,000	-30	210	Standard	6204-2RS	6661K105	00000
20 mm	52 mm	15 mm	1	4,150	14,000	-20	230	Standard	6304-2RS	5972K956	00000
20 mm	52 mm	15 mm	3	3,750	9,500	-30	210	Standard	6304-2RS	6661K125	00000
25 mm	37 mm	7 mm	1	960	18,000	-20	230	Standard	6805-2RS	5972K281	00000
25 mm	42 mm	9 mm	1	1,550	16,000	-20	230	Standard	6905-2RS	5972K292	00000
25 mm	47 mm	12 mm	3	2,650	9,500	-20	210	Standard	6005-2RS	6661K88	00000
25 mm	52 mm	15 mm	1	3,100	8,000	-20	230	Standard	6205-2RS	5972K46	00000
25 mm	52 mm	15 mm	3	3,300	8,500	-30	210	Standard	6205-2RS	6661K106	00000
25 mm	62 mm	17 mm	1	5,950	11,300	-20	230	Standard	6305-2RS	5972K518	00000
25 mm	62 mm	17 mm	3	5,250	7,500	-30	210	Standard	6305-2RS	6661K126	00000
30 mm	42 mm	7 mm	1	1,000	15,000	-20	230	Standard	6806-2RS	5972K282	00000
30 mm	47 mm	9 mm	1	1,600	14,000	-20	230	Standard	6906-2RS	5972K293	00000
30 mm	55 mm	13 mm	3	3,100	8,000	-20	210	Standard	6006-2RS	6661K89	00000
30 mm	62 mm	16 mm	1	4,900	10,200	-20	230	Standard	6206-2RS	5972K608	00000
30 mm	62 mm	16 mm	3	4,550	7,500	-30	210	Standard	6206-2RS	6661K107	00000
30 mm	72 mm	19 mm	1	6,500	6,000	-20	230	Standard	6306-2RS	5972K58	00000
30 mm	72 mm	19 mm	3	6,650	6,300	-30	210	Standard	6306-2RS	6661K127	00000
35 mm	55 mm	10 mm	1	2,450	12,000	-20	230	Standard	6907-2RS	5972K294	00000
35 mm	62 mm	14 mm	1	3,900	9,300	-20	230	Standard	6007-2RS	5972K658	00000
35 mm	62 mm	14 mm	3	3,750	14,000	-30	210	Standard	6007-2RS	4481N63	00000
35 mm	72 mm	17 mm	1	5,700	5,700	-20	230	Standard	6207-2RS	5972K48	00000
35 mm	72 mm	17 mm	3	6,050	6,300	-30	210	Standard	6207-2RS	6661K108	00000
35 mm	80 mm	21 mm	1	7,500	5,400	-20	230	Standard	6307-2RS	5972K59	00000
35 mm	80 mm	21 mm	3	7,850	6,000	-30	210	Standard	6307-2RS	6661K128	00000
40 mm	62 mm	12 mm	1	3,050	11,000	-20	230	Standard	6908-2RS	5972K295	00000
40 mm	68 mm	15 mm	1	4,000	5,400	-20	230	Standard	6008-2RS	5972K921	00000
40 mm	68 mm	15 mm	3	4,000	7,000	-30	210	Standard	6008-2RS	4481N64	00000
40 mm	80 mm	18 mm	1	6,500	5,000	-20	230	Standard	6208-2RS	5972K49	00000
40 mm	80 mm	18 mm	3	7,300	5,600	-30	210	Standard	6208-2RS	6661K109	00000
40 mm	90 mm	23 mm	1	9,550	4,800	-20	230	Standard	6308-2RS	5972K61	00000
40 mm	90 mm	23 mm	3	9,500	5,000	-30	210	Standard	6308-2RS	6661K129	000000
45 mm	75 mm	16 mm	1	4,750	4,900	-20	230	Standard	6009-2RS	5972K922	00000
45 mm	75 mm	16 mm	3	4,950	6,300	-30	210	Standard	6009-2RS	4481N65	000000
45 mm	85 mm	19 mm	1	6,950	4,600	-20	230	Standard	6209-2RS	5972K51	00000
45 mm	85 mm	19 mm	3	7,850	5,000	-30	210	Standard	6209-2RS	6661K111	00000
45 mm	100 mm	25 mm	1	11,900	6,700	-20	230	Standard	6309-2RS	5972K363	00000
45 mm	100 mm	25 mm	3	12,400	4,500	-30	210	Standard	6309-2RS	6661K131	000000
50 mm	80 mm	16 mm	1	4,900	4,400	-20	230	Standard	6010-2RS	5972K234	00000
50 mm	80 mm	16 mm	3	5,150	5,600	-30	210	Standard	6010-2RS	4481N66	000000
50 mm	90 mm	20 mm	1	8,200	4,300	-20	230	Standard	6210-2RS	5972K52	00000
50 mm	90 mm	20 mm	3	8,300	4,800	-30	210	Standard	6210-2RS	6661K112	000000
50 mm	110 mm	27 mm	1	13,900	6,000	-20	230	Standard	6310-2RS	5972K364	00000
50 mm	110 mm	27 mm	3	14,600	4,300	-30	210	Standard	6310-2RS	4481N89	000000
55 mm	90 mm	18 mm	1	6,700	4,100	-20	230	Standard	6011-2RS	5972K235	000000
55 mm	90 mm	18 mm	3	6,650	5,000	-30	210	Standard	6011-2RS	4481N67	000000
55 mm	100 mm	21 mm	1	9,650	3,900	-20	230	Standard	6211-2RS	5972K53	00000
55 mm	100 mm	21 mm	3	10,350	4,300	-30	210	Standard	6211-2RS	4481N81	000000
55 mm	120 mm	29 mm	1	17,100	3,500	-20	230	Standard	6311-2RS	5972K64	00000
55 mm	120 mm	29 mm	3	16,650	3,800	-30	210	Standard	6311-2RS	4481N91	000000
60 mm	95 mm	18 mm	1	7,050	3,700	-20	230	Standard	6012-2RS	5972K236	000000
60 mm	95 mm	18 mm	3	6,900	4,500	-30	210	Standard	6012-2RS	4481N68	000000
60 mm	110 mm	22 mm	1	11,600	3,500	-20	230	Standard	6212-2RS	5972K54	00000
60 mm	110 mm	22 mm	3	12,400	4,000	-30	210	Standard	6212-2RS	4481N82	000000
60 mm	130 mm	31 mm	1	18,300	3,300	-20	230	Standard	6312-2RS	5972K65	00000
60 mm	130 mm	31 mm	3	19,150	3,400	-30	210	Standard	6312-2RS	4481N92	000000
65 mm	100 mm	18 mm	1	7,300	3,500	-20	230	Standard	6013-2RS	5972K237	000000
65 mm	100 mm	18 mm	3	7,150	4,300	-30	210	Standard	6013-2RS	4481N69	000000
65 mm	120 mm	23 mm	3	13,150	3,600	-30	210	Standard	6213-2RS	4481N83	000000
65 mm	140 mm	33 mm	3	21,900	3,200	-30	210	Standard	6313-2RS	4481N93	000000
70 mm	110 mm	20 mm	1	9,100	3,200	-20	230	Standard	6014-2RS	5972K238	000000
70 mm	110 mm	20 mm	3	8,900	4,000	-30	210	Standard	6014-2RS	4481N71	000000
70 mm	125 mm	24 mm	3	14,300	3,400	-30	210	Standard	6214-2RS	4481N84	000000
70 mm	150 mm	35 mm	3	24,900	3,000	-30	210	Standard	6314-2RS	4481N94	000000
75 mm	115 mm	20 mm	1	9,400	3,000	-20	230	Standard	6015-2RS	5972K239	000000
75 mm	115 mm	20 mm	3	9,350	3,600	-30	210	Standard	6015-2RS	4481N72	000000
75 mm	130 mm	25 mm	3	15,450	3,200	-30	210	Standard	6215-2RS	4481N85	000000
75 mm	160 mm	37 mm	3	26,700	2,800	-30	210	Standard	6315-2RS	4481N95	000000
80 mm	125 mm	22 mm	1	11,400	2,800	-20	230	Standard	6016-2RS	5972K251	000000
80 mm	125 mm	22 mm	3	11,100	3,400	-30	210	Standard	6016-2RS	4481N73	000000
80 mm	140 mm	26 mm	3	16,350	3,000	-30	210	Standard	6216-2RS	4481N86	000000
80 mm	170 mm	39 mm	3	29,200	2,600	-30	210	Standard	6316-2RS	4481N96	000000
85 mm	130 mm	22 mm	1	11,900	2,700	-20	230	Standard	6017-2RS	5972K252	000000
85 mm	130 mm	22 mm	3	11,650	3,200	-30	210	Standard	6017-2RS	4481N74	000000
85 mm	150 mm	28 mm	3	19,550	2,800	-30	210	Standard	6217-2RS	4481N87	000000
85 mm	180 mm	41 mm	3	31,450	2,400	-30	210	Standard	6317-2RS	4481N97	000000
90 mm	140 mm	24 mm	3	13,600	3,000	-30	210	Standard	6018-2RS	4481N75	000000
90 mm	160 mm	30 mm	3	22,700	2,600	-30	210	Standard	6218-2RS	4481N88	000000
90 mm	190 mm	43 mm	3	33,900	2,400	-30	210	Standard	6318-2RS	4481N98	000000
120 mm	180 mm	28 mm	3	19,850	2,800	-30	210	Standard	6024-2RS	4481N76	000000



		Corrosion-Resistant 440C Stainless Steel

		1/8"	3/8"	5/32"	1	110	56,000	-40	240	Standard	R2-2RS	6138K63	0000


		3/16"	1/2"	0.196"	1	230	43,000	-40	240	Standard	R3-2RS	6138K64	0000
		1/4"	5/8"	0.196"	1	260	38,000	-40	240	Standard	R4-2RS	6138K65	0000
		3/8"	7/8"	9/32"	1	590	32,000	-40	240	Standard	R6-2RS	6138K66	0000
		1/2"	1 1/8"	5/16"	1	910	27,000	-40	240	Standard	R8-2RS	6138K67	00000
		5/8"	1 3/8"	11/32"	1	1,050	21,000	-40	240	Standard	R10-2RS	6138K68	00000
		3/4"	1 5/8"	7/16"	1	1,650	17,000	-40	240	Standard	R12-2RS	6138K72	00000
		7/8"	1 7/8"	1/2"	1	1,450	10,000	-20	210	Standard	R14-2RS	6138K101	00000
		1"	2"	1/2"	1	1,650	9,000	-20	210	Standard	R16-2RS	6138K104	00000
		1 1/8"	2 1/8"	1/2"	1	1,900	8,000	-20	210	Standard	R18-2RS	6138K105	00000
		1 1/4"	2 1/4"	1/2"	1	2,150	7,700	-20	210	Standard	R20-2RS	6138K107	00000


		1 1/2"	2 5/8"	9/16"	1	3,350	7,700	-20	210	Standard	R24-2RS	6138K108	000000
		5 mm	16 mm	5 mm	3	310	36,000	-40	240	Standard	625-2RS	6153K69	00000
		6 mm	19 mm	6 mm	3	440	38,000	-40	240	Standard	626-2RS	6153K25	00000
		7 mm	22 mm	7 mm	3	590	30,000	-40	240	Standard	627-2RS	6153K72	00000
		8 mm	19 mm	6 mm	3	400	36,000	-40	240	Standard	698-2RS	6153K88	00000
		8 mm	22 mm	7 mm	3	590	34,000	-40	240	Standard	608-2RS	6153K71	00000
		9 mm	24 mm	7 mm	3	600	32,000	-40	240	Standard	609-2RS	6153K68	00000
		9 mm	26 mm	8 mm	3	820	28,000	-40	240	Standard	629-2RS	6153K73	00000
		10 mm	30 mm	9 mm	1	970	24,000	-40	240	Standard	6200-2RS	6153K74	00000
		12 mm	32 mm	10 mm	1	1,250	22,000	-40	240	Standard	6201-2RS	6153K75	00000


		15 mm	35 mm	11 mm	1	1,450	20,000	-40	240	Standard	6202-2RS	6153K76	00000
		17 mm	40 mm	12 mm	1	1,800	17,000	-40	240	Standard	6203-2RS	6153K77	00000
		20 mm	47 mm	14 mm	1	2,450	15,000	-40	240	Standard	6204-2RS	6153K78	00000
		25 mm	52 mm	15 mm	1	2,650	13,000	-40	240	Standard	6205-2RS	6153K79	00000
		30 mm	62 mm	16 mm	1	3,700	11,000	-40	240	Standard	6206-2RS	6153K81	00000
		35 mm	72 mm	17 mm	1	5,800	6,000	-20	210	Standard	6207-2RS	6138K109	00000
		40 mm	80 mm	18 mm	1	6,500	5,200	-20	210	Standard	6208-2RS	6138K111	000000
		45 mm	85 mm	19 mm	1	7,300	5,000	-20	210	Standard	6209-2RS	6138K112	000000
		50 mm	90 mm	20 mm	1	7,850	4,500	-20	210	Standard	6210-2RS	6138K113	000000
		55 mm	90 mm	18 mm	1	6,350	4,200	-20	210	Standard	6011-2RS	6138K114	000000


		55 mm	100 mm	21 mm	1	9,750	4,000	-20	210	Standard	6211-2RS	6138K115	000000
		55 mm	120 mm	29 mm	1	16,100	3,500	-20	210	Standard	6311-2RS	6138K116	000000
		60 mm	95 mm	18 mm	1	6,600	4,000	-20	210	Standard	6012-2RS	6138K117	000000
		60 mm	110 mm	22 mm	1	11,800	4,000	-20	210	Standard	6212-2RS	6138K118	000000
		60 mm	130 mm	31 mm	1	18,400	3,400	-20	210	Standard	6312-2RS	6138K119	000000
		65 mm	100 mm	18 mm	1	6,850	4,000	-20	210	Standard	6013-2RS	6138K121	000000
		65 mm	120 mm	23 mm	1	12,900	3,500	-20	210	Standard	6213-2RS	6138K122	000000
		70 mm	110 mm	20 mm	1	8,550	3,400	-20	210	Standard	6014-2RS	6138K123	000000
		70 mm	125 mm	24 mm	1	14,000	3,200	-20	210	Standard	6214-2RS	6138K124	000000
		75 mm	130 mm	25 mm	1	14,900	4,800	-20	210	Standard	6215-2RS	6138K125	000000

Permanently Lubricated Ball Bearings

Install and forget these self-lubricating bearings. Their lubricant is a solid material that fills the space between the balls and releases oil over time, so you'll never need to add more.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

							Temp. Range, ° F
	For Shaft Dia.	For Housing ID	Wd.	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Open







				Steel

				1/8"	3/8"	5/32"	1	140	50,000	10	200	Standard	R2	2342K61	000000


				3/16"	1/2"	5/32"	1	290	37,500	10	200	Standard	R3	2342K62	00000
				1/4"	5/8"	3/16"	1	330	28,500	10	200	Standard	R4	2342K163	00000
				1/4"	3/4"	7/32"	1	520	24,000	10	200	Standard	R4A	2342K164	00000
				3/8"	7/8"	7/32"	1	740	19,000	10	200	Standard	R6	2342K165	00000
				1/2"	1 1/8"	1/4"	1	1,100	15,000	10	200	Standard	R8	2342K166	00000
				5/8"	1 3/8"	9/32"	1	1,300	12,000	10	200	Standard	R10	2342K167	00000
				3/4"	1 5/8"	5/16"	1	2,100	10,000	10	200	Standard	R12	2342K168	00000
				7/8"	1 7/8"	3/8"	1	1,700	8,600	10	200	Standard	R14	2342K169	00000
				1"	2"	3/8"	1	1,800	8,000	10	200	Standard	R16	2342K171	00000
				1 1/8"	2 1/8"	3/8"	1	2,250	7,000	10	200	Standard	R18	2342K25	00000


				1 1/4"	2 1/4"	3/8"	1	2,250	6,000	10	200	Standard	R20	2342K26	00000
				1 3/8"	2 1/2"	7/16"	1	2,750	6,500	10	200	Standard	R22	2342K27	00000
				1 1/2"	2 5/8"	7/16"	1	2,900	5,700	10	200	Standard	R24	2342K28	00000
				5 mm	19 mm	6 mm	1	400	25,000	10	200	Standard	635	2349K703	00000
				8 mm	22 mm	7 mm	1	570	20,000	10	200	Standard	608	2349K701	00000
				9 mm	26 mm	8 mm	1	790	17,000	10	200	Standard	629	2349K702	00000
				10 mm	19 mm	5 mm	1	130	20,500	10	200	Standard	6800	2349K725	00000
				10 mm	22 mm	6 mm	1	600	18,500	10	200	Standard	6900	2349K733	00000
				10 mm	26 mm	8 mm	1	860	16,500	10	200	Standard	6000	2349K212	00000
				10 mm	30 mm	9 mm	1	970	15,000	10	200	Standard	6200	2349K218	00000


				12 mm	21 mm	5 mm	1	140	18,000	10	200	Standard	6801	2349K726	00000
				12 mm	24 mm	6 mm	1	640	16,500	10	200	Standard	6901	2349K734	00000
				12 mm	28 mm	8 mm	1	970	15,000	10	200	Standard	6001	2349K213	00000
				12 mm	32 mm	10 mm	1	1,250	13,500	10	200	Standard	6201	2349K219	00000
				12 mm	37 mm	12 mm	1	1,700	12,000	10	200	Standard	6301	2349K712	00000
				15 mm	24 mm	5 mm	1	160	15,000	10	200	Standard	6802	2349K727	00000
				15 mm	28 mm	7 mm	1	970	13,500	10	200	Standard	6902	2349K735	00000
				15 mm	32 mm	9 mm	1	1,050	12,500	10	200	Standard	6002	2349K214	00000
				15 mm	35 mm	11 mm	1	1,450	12,000	10	200	Standard	6202	2349K221	00000
				15 mm	42 mm	13 mm	1	1,950	10,500	10	200	Standard	6302	2349K713	00000


				17 mm	26 mm	5 mm	1	170	13,500	10	200	Standard	6803	2349K728	00000
				17 mm	30 mm	7 mm	1	1,000	12,500	10	200	Standard	6903	2349K736	00000
				17 mm	35 mm	10 mm	1	1,100	11,500	10	200	Standard	6003	2349K215	00000
				17 mm	40 mm	12 mm	1	1,800	10,500	10	200	Standard	6203	2349K222	00000
				17 mm	47 mm	14 mm	1	2,300	9,300	10	200	Standard	6303	2349K714	00000
				20 mm	32 mm	7 mm	1	350	11,500	10	200	Standard	6804	2349K729	00000
				20 mm	37 mm	9 mm	1	1,400	10,500	10	200	Standard	6904	2349K737	00000
				20 mm	42 mm	12 mm	1	1,750	9,600	10	200	Standard	6004	2349K216	00000
				20 mm	47 mm	14 mm	1	2,450	8,900	10	200	Standard	6204	2349K223	00000
				20 mm	52 mm	15 mm	1	2,750	8,300	10	200	Standard	6304	2349K715	00000


				25 mm	37 mm	7 mm	1	390	9,500	10	200	Standard	6805	2349K731	00000
				25 mm	42 mm	9 mm	1	1,550	8,500	10	200	Standard	6905	2349K738	00000
				25 mm	47 mm	12 mm	1	1,900	8,300	10	200	Standard	6005	2349K217	00000
				25 mm	52 mm	15 mm	1	2,650	7,700	10	200	Standard	6205	2349K224	00000
25 mm				62 mm	17 mm	1	3,650	6,700	10	200	Standard	6305	2349K716	00000
30 mm	42 mm			7 mm	1	360	8,300	10	200	Standard	6806	2349K732	00000
30 mm	47 mm			9 mm	1	1,600	7,500	10	200	Standard	6906	2349K739	00000
30 mm	62 mm			16 mm	1	3,700	6,500	10	200	Standard	6206	2349K225	00000
30 mm	72 mm			19 mm	1	4,600	5,700	10	200	Standard	6306	2349K717	00000
35 mm	55 mm	10 mm		1	2,450	6,600	10	200	Standard	6907	2349K741	00000
35 mm	62 mm	14 mm	1	2,750	6,000	10	200	Standard	6007	2349K704	00000
35 mm	72 mm	17 mm	1	4,450	5,600	10	200	Standard	6207	2349K705	00000
35 mm	80 mm	21 mm	1	5,750	5,000	10	200	Standard	6307	2349K718	00000
40 mm	62 mm	12 mm	1	3,050	5,700	10	200	Standard	6908	2349K742	00000
40 mm	80 mm	18 mm	1	5,050	5,000	10	200	Standard	6208	2349K706	00000
40 mm	90 mm	23 mm	1	7,050	4,600	10	200	Standard	6308	2349K719	00000
45 mm	85 mm	19 mm	1	5,650	4,600	10	200	Standard	6209	2349K707	00000
45 mm	100 mm	25 mm	1	9,150	4,000	10	200	Standard	6309	2349K721	00000
50 mm	90 mm	20 mm	1	6,050	4,000	10	200	Standard	6210	2349K708	00000
50 mm	110 mm	27 mm	1	10,700	3,700	10	200	Standard	6310	2349K722	000000
55 mm	100 mm	21 mm	1	7,500	3,700	10	200	Standard	6211	2349K709	000000
55 mm	120 mm	29 mm	1	13,100	3,300	10	200	Standard	6311	2349K723	000000
60 mm	110 mm	22 mm	1	9,050	3,300	10	200	Standard	6212	2349K711	000000
60 mm	130 mm	31 mm	1	14,150	3,000	10	200	Standard	6312	2349K724	000000



		Corrosion-Resistant 440C Stainless Steel

		1/8"	3/8"	5/32"	1	55	50,000	-10	200	Standard	R2	4668K1	00000


		3/16"	1/2"	5/32"	1	110	37,500	-10	200	Standard	R3	4668K2	00000
		1/4"	5/8"	0.196"	1	130	28,500	-10	200	Standard	R4	4668K3	00000
		1/4"	3/4"	7/32"	1	405	46,000	-10	200	Standard	R4A	4668K4	00000
		3/8"	7/8"	7/32"	1	460	19,000	-10	200	Standard	R6	4668K5	00000
		1/2"	1 1/8"	1/4"	1	700	15,000	-10	200	Standard	R8	4668K6	00000
		5/8"	1 3/8"	9/32"	1	830	12,000	-10	200	Standard	R10	4668K7	00000
		3/4"	1 5/8"	5/16"	1	1,620	10,000	-10	200	Standard	R12	4668K8	00000
		7/8"	1 7/8"	3/8"	1	1,700	8,000	-10	200	Standard	R14	4668K101	00000
		1"	2"	3/8"	1	1,700	7,000	-10	200	Standard	R16	4668K102	00000
		3 mm	7 mm	2 mm	1	35	60,000	-10	200	Standard	683	4668K105	00000


		3 mm	8 mm	3 mm	1	65	54,000	-10	200	Standard	693	4668K106	00000
		3 mm	9 mm	3 mm	1	65	50,000	-10	200	Standard	603	4668K107	00000
		3 mm	10 mm	4 mm	1	110	46,000	-10	200	Standard	623	4668K103	00000
		3 mm	13 mm	5 mm	1	220	37,000	-10	200	Standard	633	4668K104	00000
		4 mm	9 mm	2.5 mm	1	80	46,000	-10	200	Standard	684	4668K113	00000
		4 mm	12 mm	4 mm	1	240	37,000	-10	200	Standard	604	4668K109	00000
		4 mm	16 mm	5 mm	1	300	30,000	-10	200	Standard	634	4668K322	00000
		5 mm	11 mm	3 mm	1	120	37,000	-10	200	Standard	685	4668K114	00000
		5 mm	13 mm	4 mm	1	180	33,000	-10	200	Standard	695	4668K115	00000
		5 mm	14 mm	5 mm	1	230	31,000	-10	200	Standard	605	4668K116	00000


		5 mm	16 mm	5 mm	1	300	28,000	-10	200	Standard	625	4668K117	00000
		5 mm	19 mm	6 mm	1	400	25,000	-10	200	Standard	635	4668K118	00000
		6 mm	13 mm	3.5 mm	1	180	31,000	-10	200	Standard	686	4668K119	00000
		6 mm	15 mm	5 mm	1	230	28,000	-10	200	Standard	696	4668K121	00000
		6 mm	17 mm	6 mm	1	340	26,000	-10	200	Standard	606	4668K122	00000
		6 mm	19 mm	6 mm	1	400	24,000	-10	200	Standard	626	4668K123	00000
		6 mm	22 mm	7 mm	1	740	21,000	-10	200	Standard	636	4668K325	00000
		7 mm	14 mm	3.5 mm	1	200	30,000	-10	200	Standard	687	4668K125	00000
		7 mm	17 mm	5 mm	1	300	28,000	-10	200	Standard	697	4668K126	00000
		7 mm	19 mm	6 mm	1	390	23,000	-10	200	Standard	607	4668K127	00000


		7 mm	22 mm	7 mm	1	570	20,000	-10	200	Standard	627	4668K128	00000
		8 mm	16 mm	4 mm	1	210	25,000	-10	200	Standard	688	4668K131	00000
		8 mm	19 mm	6 mm	1	320	22,000	-10	200	Standard	698	4668K132	00000
		8 mm	22 mm	7 mm	1	570	20,000	-10	200	Standard	608	4668K133	00000
		8 mm	24 mm	8 mm	1	430	18,000	-10	200	Standard	628	4668K134	00000
		8 mm	28 mm	9 mm	1	1,000	16,000	-10	200	Standard	638	4668K135	00000
		9 mm	14 mm	3 mm	1	200	26,000	-10	200	Standard	679	4668K136	00000
		9 mm	17 mm	4 mm	1	220	23,000	-10	200	Standard	689	4668K137	00000
		9 mm	20 mm	6 mm	1	320	20,000	-10	200	Standard	699	4668K138	00000
		10 mm	15 mm	3 mm	1	190	24,000	-10	200	Standard	6700	4668K326	00000


		10 mm	19 mm	5 mm	1	380	20,000	-10	200	Standard	6800	4668K152	00000
		10 mm	19 mm	7 mm	1	380	20,000	-10	200	Standard	63800	4668K176	00000
		10 mm	22 mm	6 mm	1	600	18,000	-10	200	Standard	6900	4668K164	00000
		10 mm	26 mm	8 mm	1	790	16,000	-10	200	Standard	6000	4668K181	00000
		10 mm	30 mm	9 mm	1	930	15,000	-10	200	Standard	6200	4668K193	00000
		10 mm	35 mm	11 mm	1	1,400	13,000	-10	200	Standard	6300	4668K205	00000
		12 mm	18 mm	4 mm	1	200	20,000	-10	200	Standard	6701	4668K143	00000
		12 mm	21 mm	5 mm	1	430	18,000	-10	200	Standard	6801	4668K153	00000
		12 mm	24 mm	6 mm	1	640	16,000	-10	200	Standard	6901	4668K165	00000
12 mm		28 mm	8 mm	1	880	15,000	-10	200	Standard	6001	4668K182	00000
12 mm	32 mm	10 mm	1	1,050	13,000	-10	200	Standard	6201	4668K194	00000
15 mm	21 mm	4 mm	1	210	16,000	-10	200	Standard	6702	4668K144	00000
15 mm	24 mm	5 mm	1	460	15,000	-10	200	Standard	6802	4668K154	00000
15 mm	28 mm	7 mm	1	970	14,000	-10	200	Standard	6902	4668K166	00000
15 mm	32 mm	9 mm	1	970	12,000	-10	200	Standard	6002	4668K183	00000
15 mm	35 mm	11 mm	1	1,300	12,000	-10	200	Standard	6202	4668K195	00000
15 mm	42 mm	13 mm	1	1,950	10,000	-10	200	Standard	6302	4668K207	00000
17 mm	23 mm	4 mm	1	220	15,000	-10	200	Standard	6703	4668K145	00000
17 mm	30 mm	7 mm	1	1,000	12,000	-10	200	Standard	6903	4668K167	00000
17 mm	35 mm	10 mm	1	1,180	11,000	-10	200	Standard	6003	4668K184	00000
17 mm	40 mm	12 mm	1	1,650	10,000	-10	200	Standard	6203	4668K196	00000
20 mm	27 mm	4 mm	1	310	12,000	-10	200	Standard	6704	4668K146	00000
20 mm	32 mm	7 mm	1	900	11,000	-10	200	Standard	6804	4668K156	00000
20 mm	37 mm	9 mm	1	1,400	10,000	-10	200	Standard	6904	4668K168	00000
20 mm	42 mm	12 mm	1	1,600	9,000	-10	200	Standard	6004	4668K185	00000
20 mm	47 mm	14 mm	1	2,200	9,000	-10	200	Standard	6204	4668K197	00000
20 mm	52 mm	15 mm	1	2,750	8,000	-10	200	Standard	6304	4668K209	000000
25 mm	32 mm	4 mm	1	240	10,000	-10	200	Standard	6705	4668K147	00000
25 mm	42 mm	9 mm	1	1,550	9,000	-10	200	Standard	6905	4668K169	00000
25 mm	47 mm	12 mm	1	1,700	8,000	-10	200	Standard	6005	4668K186	00000
25 mm	52 mm	15 mm	1	2,400	8,000	-10	200	Standard	6205	4668K198	00000
25 mm	62 mm	17 mm	1	3,650	7,000	-10	200	Standard	6305	4668K327	000000
30 mm	37 mm	4 mm	1	250	9,000	-10	200	Standard	6706	4668K148	00000
30 mm	42 mm	7 mm	1	1,000	8,000	-10	200	Standard	6806	4668K158	00000
30 mm	55 mm	13 mm	1	2,250	7,000	-10	200	Standard	6006	4668K187	00000
30 mm	62 mm	16 mm	1	3,350	6,000	-10	200	Standard	6206	4668K199	000000
35 mm	44 mm	5 mm	1	410	7,000	-10	200	Standard	6707	4668K149	00000
35 mm	62 mm	14 mm	1	2,750	6,000	-10	200	Standard	6007	4668K188	000000
35 mm	72 mm	17 mm	1	4,450	5,000	-10	200	Standard	6207	4668K201	000000
40 mm	52 mm	7 mm	1	1,100	6,000	-10	200	Standard	6808	4668K161	00000
40 mm	68 mm	15 mm	1	2,900	5,000	-10	200	Standard	6008	4668K189	000000
40 mm	80 mm	18 mm	1	5,050	5,000	-10	200	Standard	6208	4668K202	000000
45 mm	68 mm	12 mm	1	3,150	5,000	-10	200	Standard	6909	4668K174	000000
45 mm	75 mm	16 mm	1	3,650	5,000	-10	200	Standard	6009	4668K191	000000
45 mm	85 mm	19 mm	1	5,650	4,000	-10	200	Standard	6209	4668K203	000000
50 mm	65 mm	7 mm	1	1,450	5,000	-10	200	Standard	6810	4668K163	000000
50 mm	72 mm	12 mm	1	3,250	5,000	-10	200	Standard	6910	4668K175	000000

Sealed







				Steel

				1/8"	3/8"	5/32"	1	140	50,000	10	200	Standard	R2-2RS	2342K81	00000


				3/16"	1/2"	3/16"	1	290	37,500	10	200	Standard	R3-2RS	2342K82	00000
				1/4"	5/8"	3/16"	1	330	28,500	10	200	Standard	R4-2RS	2342K183	00000
				1/4"	3/4"	9/32"	1	520	24,000	10	200	Standard	R4A-2RS	2342K184	00000
				3/8"	7/8"	9/32"	1	740	19,000	10	200	Standard	R6-2RS	2342K185	00000
				1/2"	1 1/8"	5/16"	1	1,100	15,000	10	200	Standard	R8-2RS	2342K186	00000
				5/8"	1 3/8"	11/32"	1	1,300	12,000	10	200	Standard	R10-2RS	2342K187	00000
				3/4"	1 5/8"	7/16"	1	2,100	10,000	10	200	Standard	R12-2RS	2342K188	00000
				7/8"	1 7/8"	1/2"	1	1,700	8,600	10	200	Standard	R14-2RS	2342K189	00000
				1"	2"	1/2"	1	1,800	8,000	10	200	Standard	R16-2RS	2342K191	00000
				1 1/4"	2 1/4"	1/2"	1	2,250	6,000	10	200	Standard	R20-2RS	2342K29	00000


				6 mm	19 mm	6 mm	1	400	24,000	10	200	Standard	626-2RS	2349K745	00000
				7 mm	19 mm	6 mm	1	390	23,000	10	200	Standard	607-2RS	2349K743	00000
				7 mm	22 mm	7 mm	1	570	20,500	10	200	Standard	627-2RS	2349K746	00000
				8 mm	22 mm	7 mm	1	570	20,000	10	200	Standard	608-2RS	2349K744	00000
				9 mm	26 mm	8 mm	1	790	17,000	10	200	Standard	629-2RS	2349K747	00000
				10 mm	19 mm	5 mm	1	290	20,500	10	200	Standard	6800-2RS	2349K781	00000
				10 mm	22 mm	6 mm	1	600	18,500	10	200	Standard	6900-2RS	2349K788	00000
				10 mm	26 mm	8 mm	1	860	16,500	10	200	Standard	6000-2RS	2349K412	00000
				10 mm	30 mm	9 mm	1	970	15,000	10	200	Standard	6200-2RS	2349K418	00000
				10 mm	35 mm	11 mm	1	1,400	13,000	10	200	Standard	6300-2RS	2349K766	00000


				12 mm	21 mm	5 mm	1	320	18,000	10	200	Standard	6801-2RS	2349K782	00000
				12 mm	24 mm	6 mm	1	640	16,500	10	200	Standard	6901-2RS	2349K789	00000
				12 mm	28 mm	8 mm	1	970	15,000	10	200	Standard	6001-2RS	2349K413	00000
				12 mm	32 mm	10 mm	1	1,250	13,500	10	200	Standard	6201-2RS	2349K419	00000
				12 mm	37 mm	12 mm	1	1,700	12,000	10	200	Standard	6301-2RS	2349K767	00000
				15 mm	24 mm	5 mm	1	350	15,000	10	200	Standard	6802-2RS	2349K783	00000
				15 mm	28 mm	7 mm	1	970	13,500	10	200	Standard	6902-2RS	2349K791	00000
				15 mm	32 mm	9 mm	1	1,050	12,500	10	200	Standard	6002-2RS	2349K414	00000
				15 mm	35 mm	11 mm	1	1,450	12,000	10	200	Standard	6202-2RS	2349K421	00000
				15 mm	42 mm	13 mm	1	1,950	10,500	10	200	Standard	6302-2RS	2349K768	00000


				17 mm	26 mm	5 mm	1	380	13,500	10	200	Standard	6803-2RS	2349K784	00000
				17 mm	30 mm	7 mm	1	1,030	12,500	10	200	Standard	6903-2RS	2349K792	00000
				17 mm	35 mm	10 mm	1	1,100	11,500	10	200	Standard	6003-2RS	2349K415	00000
				17 mm	40 mm	12 mm	1	1,800	10,500	10	200	Standard	6203-2RS	2349K422	00000
				17 mm	47 mm	14 mm	1	2,300	9,300	10	200	Standard	6303-2RS	2349K769	00000
				20 mm	32 mm	7 mm	1	780	11,500	10	200	Standard	6804-2RS	2349K785	00000
				20 mm	37 mm	9 mm	1	1,430	10,500	10	200	Standard	6904-2RS	2349K793	00000
				20 mm	42 mm	12 mm	1	1,750	9,600	10	200	Standard	6004-2RS	2349K416	00000
				20 mm	47 mm	14 mm	1	2,450	8,900	10	200	Standard	6204-2RS	2349K423	00000
				20 mm	52 mm	15 mm	1	2,750	8,300	10	200	Standard	6304-2RS	2349K771	00000


				25 mm	37 mm	7 mm	1	850	9,600	10	200	Standard	6805-2RS	2349K786	00000
				25 mm	42 mm	9 mm	1	1,570	8,900	10	200	Standard	6905-2RS	2349K794	00000
				25 mm	47 mm	12 mm	1	1,900	8,300	10	200	Standard	6005-2RS	2349K417	00000
				25 mm	52 mm	15 mm	1	2,650	7,700	10	200	Standard	6205-2RS	2349K424	00000
25 mm				62 mm	17 mm	1	3,650	6,700	10	200	Standard	6305-2RS	2349K772	00000
30 mm	42 mm			7 mm	1	790	8,300	10	200	Standard	6806-2RS	2349K787	00000
30 mm	47 mm			9 mm	1	1,620	7,700	10	200	Standard	6906-2RS	2349K795	00000
30 mm	55 mm			13 mm	1	2,250	7,000	10	200	Standard	6006-2RS	2349K748	00000
30 mm	62 mm			16 mm	1	3,700	6,500	10	200	Standard	6206-2RS	2349K425	00000
30 mm	72 mm	19 mm		1	4,600	5,700	10	200	Standard	6306-2RS	2349K773	00000
35 mm	55 mm	10 mm	1	2,450	6,600	10	200	Standard	6907-2RS	2349K796	00000
35 mm	62 mm	14 mm	1	2,750	6,000	10	200	Standard	6007-2RS	2349K749	00000
35 mm	72 mm	17 mm	1	4,450	5,600	10	200	Standard	6207-2RS	2349K759	00000
35 mm	80 mm	21 mm	1	5,750	5,000	10	200	Standard	6307-2RS	2349K774	000000
40 mm	62 mm	12 mm	1	3,070	5,700	10	200	Standard	6908-2RS	2349K797	00000
40 mm	68 mm	15 mm	1	3,200	5,550	10	200	Standard	6008-2RS	2349K801	00000
40 mm	80 mm	18 mm	1	5,050	5,000	10	200	Standard	6208-2RS	2349K761	00000
40 mm	90 mm	23 mm	1	7,050	4,600	10	200	Standard	6308-2RS	2349K775	00000
45 mm	75 mm	16 mm	1	4,000	5,000	10	200	Standard	6009-2RS	2349K802	00000
45 mm	85 mm	19 mm	1	5,650	4,600	10	200	Standard	6209-2RS	2349K762	00000
45 mm	100 mm	25 mm	1	9,150	4,000	10	200	Standard	6309-2RS	2349K776	00000
50 mm	80 mm	16 mm	1	3,750	4,500	10	200	Standard	6010-2RS	2349K751	00000
50 mm	90 mm	20 mm	1	6,050	4,000	10	200	Standard	6210-2RS	2349K763	00000
50 mm	110 mm	27 mm	1	10,700	3,700	10	200	Standard	6310-2RS	2349K777	000000
55 mm	90 mm	18 mm	1	4,900	4,000	10	200	Standard	6011-2RS	2349K752	000000
55 mm	100 mm	21 mm	1	7,500	3,700	10	200	Standard	6211-2RS	2349K764	000000
55 mm	120 mm	29 mm	1	13,100	3,300	10	200	Standard	6311-2RS	2349K778	000000
60 mm	95 mm	18 mm	1	5,100	3,700	10	200	Standard	6012-2RS	2349K753	000000
60 mm	110 mm	22 mm	1	10,000	3,500	10	200	Standard	6212-2RS	2349K765	000000
60 mm	130 mm	31 mm	1	14,150	3,100	10	200	Standard	6312-2RS	2349K779	000000
65 mm	100 mm	18 mm	1	5,300	3,500	10	200	Standard	6013-2RS	2349K754	000000
70 mm	110 mm	20 mm	1	6,600	3,300	10	200	Standard	6014-2RS	2349K756	000000
75 mm	115 mm	20 mm	1	6,850	3,000	10	200	Standard	6015-2RS	2349K755	000000
80 mm	125 mm	22 mm	1	8,200	2,900	10	200	Standard	6016-2RS	2349K757	000000
85 mm	130 mm	22 mm	1	8,500	2,700	10	200	Standard	6017-2RS	2349K758	000000



		Corrosion-Resistant 440C Stainless Steel

		1/8"	3/8"	5/32"	1	55	50,000	-10	200	Standard	R2-2RS	4668K9	00000


		3/16"	1/2"	0.196"	1	110	37,500	-10	200	Standard	R3-2RS	4668K11	00000
		1/4"	5/8"	0.196"	1	130	28,500	-10	200	Standard	R4-2RS	4668K12	00000
		1/4"	3/4"	9/32"	1	405	24,000	-10	200	Standard	R4A-2RS	4668K13	00000
		3/8"	7/8"	9/32"	1	460	19,000	-10	200	Standard	R6-2RS	4668K14	00000
		1/2"	1 1/8"	5/16"	1	700	15,000	-10	200	Standard	R8-2RS	4668K15	00000
		5/8"	1 3/8"	11/32"	1	830	12,000	-10	200	Standard	R10-2RS	4668K16	00000
		3/4"	1 5/8"	7/16"	1	1,620	10,000	-10	200	Standard	R12	4668K17	00000
		7/8"	1 7/8"	1/2"	1	1,740	8,000	-10	200	Standard	R14	4668K18	00000
		1"	2"	1/2"	1	1,740	7,000	-10	200	Standard	R16	4668K19	00000
		3 mm	7 mm	3 mm	1	35	60,000	-10	200	Standard	683-2RS	4668K216	00000


		3 mm	8 mm	4 mm	1	65	54,000	-10	200	Standard	693-2RS	4668K217	00000
		3 mm	10 mm	4 mm	1	110	46,000	-10	200	Standard	623-2RS	4668K214	00000
		3 mm	13 mm	5 mm	1	220	37,000	-10	200	Standard	633-2RS	4668K215	00000
		4 mm	9 mm	4 mm	1	80	46,000	-10	200	Standard	684-2RS	4668K337	00000
		4 mm	11 mm	4 mm	1	120	40,000	-10	200	Standard	694-2RS	4668K219	00000
		4 mm	12 mm	4 mm	1	240	37,000	-10	200	Standard	604-2RS	4668K221	00000
		4 mm	13 mm	5 mm	1	220	35,000	-10	200	Standard	624-2RS	4668K222	00000
		4 mm	16 mm	5 mm	1	300	30,000	-10	200	Standard	634-2RS	4668K329	00000
		5 mm	11 mm	5 mm	1	120	37,000	-10	200	Standard	685-2RS	4668K225	00000
		5 mm	13 mm	4 mm	1	180	33,000	-10	200	Standard	695-2RS	4668K226	00000


		5 mm	14 mm	5 mm	1	230	31,000	-10	200	Standard	605-2RS	4668K227	00000
		5 mm	16 mm	5 mm	1	300	28,000	-10	200	Standard	625-2RS	4668K228	00000
		5 mm	19 mm	6 mm	1	400	25,000	-10	200	Standard	635-2RS	4668K229	00000
		6 mm	13 mm	5 mm	1	180	31,000	-10	200	Standard	686-2RS	4668K231	00000
		6 mm	15 mm	5 mm	1	230	28,000	-10	200	Standard	696-2RS	4668K338	00000
		6 mm	17 mm	6 mm	1	340	26,000	-10	200	Standard	606-2RS	4668K233	00000
		6 mm	19 mm	6 mm	1	400	24,000	-10	200	Standard	626-2RS	4668K234	00000
		6 mm	22 mm	7 mm	1	740	21,000	-10	200	Standard	636-2RS	4668K235	00000
		7 mm	14 mm	5 mm	1	200	30,000	-10	200	Standard	687-2RS	4668K236	00000
		7 mm	17 mm	5 mm	1	300	28,000	-10	200	Standard	697-2RS	4668K237	00000


		7 mm	19 mm	6 mm	1	390	23,000	-10	200	Standard	607-2RS	4668K238	00000
		8 mm	16 mm	5 mm	1	210	25,000	-10	200	Standard	688-2RS	4668K334	00000
		8 mm	19 mm	6 mm	1	320	22,000	-10	200	Standard	698-2RS	4668K243	00000
		8 mm	22 mm	7 mm	1	570	20,000	-10	200	Standard	608-2RS	4668K244	00000
		8 mm	24 mm	8 mm	1	430	18,000	-10	200	Standard	628-2RS	4668K245	00000
		8 mm	28 mm	9 mm	1	1,000	16,000	-10	200	Standard	638-2RS	4668K246	00000
		9 mm	17 mm	5 mm	1	220	23,000	-10	200	Standard	689-2RS	4668K247	00000
		9 mm	20 mm	6 mm	1	320	20,000	-10	200	Standard	699-2RS	4668K248	00000
		9 mm	24 mm	7 mm	1	580	18,000	-10	200	Standard	609-2RS	4668K249	00000
		9 mm	26 mm	8 mm	1	790	17,000	-10	200	Standard	629-2RS	4668K251	00000


		10 mm	15 mm	4 mm	1	190	24,000	-10	200	Standard	6700-2RS	4668K252	00000
		10 mm	19 mm	5 mm	1	380	20,000	-10	200	Standard	6800-2RS	4668K262	00000
		10 mm	19 mm	7 mm	1	380	20,000	-10	200	Standard	63800-2RS	4668K285	00000
		10 mm	22 mm	6 mm	1	600	18,000	-10	200	Standard	6900-2RS	4668K274	00000
		10 mm	26 mm	8 mm	1	790	16,000	-10	200	Standard	6000-2RS	4668K289	00000
		10 mm	30 mm	9 mm	1	930	15,000	-10	200	Standard	6200-2RS	4668K301	00000
		10 mm	35 mm	11 mm	1	1,400	13,000	-10	200	Standard	6300-2RS	4668K313	00000
		12 mm	18 mm	4 mm	1	200	20,000	-10	200	Standard	6701-2RS	4668K253	00000
		12 mm	21 mm	5 mm	1	430	18,000	-10	200	Standard	6801-2RS	4668K263	00000
12 mm		21 mm	7 mm	1	430	18,000	-10	200	Standard	63801-2RS	4668K286	00000
12 mm	24 mm	6 mm	1	640	16,000	-10	200	Standard	6901-2RS	4668K275	00000
12 mm	28 mm	8 mm	1	880	15,000	-10	200	Standard	6001-2RS	4668K29	00000
12 mm	32 mm	10 mm	1	1,050	13,000	-10	200	Standard	6201-2RS	4668K302	00000
12 mm	37 mm	12 mm	1	1,700	12,000	-10	200	Standard	6301-2RS	4668K314	00000
15 mm	21 mm	4 mm	1	210	16,000	-10	200	Standard	6702-2RS	4668K254	00000
15 mm	24 mm	5 mm	1	460	15,000	-10	200	Standard	6802-2RS	4668K264	00000
15 mm	28 mm	7 mm	1	970	14,000	-10	200	Standard	6902-2RS	4668K276	00000
15 mm	32 mm	9 mm	1	970	12,000	-10	200	Standard	6002-2RS	4668K291	00000
15 mm	35 mm	11 mm	1	1,300	12,000	-10	200	Standard	6202-2RS	4668K303	00000
15 mm	42 mm	13 mm	1	1,950	10,000	-10	200	Standard	6302-2RS	4668K315	00000
17 mm	23 mm	4 mm	1	220	15,000	-10	200	Standard	6703-2RS	4668K255	00000
17 mm	26 mm	5 mm	1	500	14,000	-10	200	Standard	6803-2RS	4668K265	00000
17 mm	30 mm	7 mm	1	1,000	12,000	-10	200	Standard	6903-2RS	4668K277	00000
17 mm	35 mm	10 mm	1	1,150	11,000	-10	200	Standard	6003-2RS	4668K292	00000
17 mm	40 mm	12 mm	1	1,650	10,000	-10	200	Standard	6203-2RS	4668K304	00000
20 mm	27 mm	4 mm	1	310	12,000	-10	200	Standard	6704-2RS	4668K256	00000
20 mm	32 mm	7 mm	1	900	11,000	-10	200	Standard	6804-2RS	4668K266	00000
20 mm	37 mm	9 mm	1	1,400	10,000	-10	200	Standard	6904-2RS	4668K278	00000
20 mm	42 mm	12 mm	1	1,600	9,000	-10	200	Standard	6004-2RS	4668K293	00000
20 mm	47 mm	14 mm	1	2,200	9,000	-10	200	Standard	6204-2RS	4668K305	00000
20 mm	52 mm	15 mm	1	2,750	8,000	-10	200	Standard	6304-2RS	4668K317	000000
25 mm	32 mm	4 mm	1	240	10,000	-10	200	Standard	6705-2RS	4668K257	00000
25 mm	37 mm	7 mm	1	960	9,000	-10	200	Standard	6805-2RS	4668K267	00000
25 mm	42 mm	9 mm	1	1,550	9,000	-10	200	Standard	6905-2RS	4668K279	00000
25 mm	47 mm	12 mm	1	1,700	8,000	-10	200	Standard	6005-2RS	4668K294	00000
25 mm	52 mm	15 mm	1	2,400	8,000	-10	200	Standard	6205-2RS	4668K306	00000
25 mm	62 mm	17 mm	1	3,650	7,000	-10	200	Standard	6305-2RS	4668K318	000000
30 mm	37 mm	4 mm	1	250	9,000	-10	200	Standard	6706-2RS	4668K258	00000
30 mm	42 mm	7 mm	1	1,000	8,000	-10	200	Standard	6806-2RS	4668K268	00000
30 mm	47 mm	9 mm	1	1,600	8,000	-10	200	Standard	6906-2RS	4668K28	00000
30 mm	55 mm	13 mm	1	2,250	7,000	-10	200	Standard	6006-2RS	4668K295	000000
30 mm	62 mm	16 mm	1	3,350	6,000	-10	200	Standard	6206-2RS	4668K307	000000
35 mm	44 mm	5 mm	1	410	7,000	-10	200	Standard	6707-2RS	4668K259	00000
35 mm	47 mm	7 mm	1	1,060	7,000	-10	200	Standard	6807-2RS	4668K269	00000
35 mm	55 mm	10 mm	1	2,450	6,000	-10	200	Standard	6907-2RS	4668K281	00000
35 mm	62 mm	14 mm	1	2,750	6,000	-10	200	Standard	6007-2RS	4668K296	000000
35 mm	72 mm	17 mm	1	4,450	5,000	-10	200	Standard	6207-2RS	4668K308	000000
40 mm	50 mm	6 mm	1	560	6,000	-10	200	Standard	6708-2RS	4668K261	000000
40 mm	52 mm	7 mm	1	1,100	6,000	-10	200	Standard	6808-2RS	4668K271	000000
40 mm	62 mm	12 mm	1	3,050	6,000	-10	200	Standard	6908-2RS	4668K282	000000
40 mm	68 mm	15 mm	1	2,900	5,000	-10	200	Standard	6008-2RS	4668K297	000000
40 mm	80 mm	18 mm	1	5,050	5,000	-10	200	Standard	6208-2RS	4668K309	000000
45 mm	58 mm	7 mm	1	1,350	6,000	-10	200	Standard	6809-2RS	4668K272	000000
45 mm	68 mm	12 mm	1	3,150	5,000	-10	200	Standard	6909-2RS	4668K283	000000
45 mm	75 mm	16 mm	1	3,650	5,000	-10	200	Standard	6009-2RS	4668K298	000000
45 mm	85 mm	19 mm	1	5,650	4,000	-10	200	Standard	6209-2RS	4668K335	000000
50 mm	65 mm	7 mm	1	1,450	5,000	-10	200	Standard	6810-2RS	4668K273	000000
50 mm	72 mm	12 mm	1	3,250	5,000	-10	200	Standard	6910-2RS	4668K284	000000
50 mm	80 mm	16 mm	1	3,750	4,000	-10	200	Standard	6010-2RS	4668K299	000000
50 mm	90 mm	20 mm	1	6,050	4,000	-10	200	Standard	6210-2RS	4668K336	000000

Flanged Ball Bearings

Install these bearings inside a housing and they won't budge. The flange presses against the housing wall, so vibration and other sudden forces parallel to the shaft (thrust loads) won't knock them off-kilter.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

				Flange					Temp. Range, ° F
	For Shaft Dia.	For Housing ID	Wd.	OD	Thk.	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Open







				Steel

				1/4"	11/16"	1/4"	0.807"	0.05"	Not Rated	330	1,200	-20	250	Extended	—	6383K213	00000


				1/4"	7/8"	1/4"	1"	0.05"	Not Rated	400	1,200	-20	250	Extended	—	6383K214	0000
				5/16"	7/8"	1/4"	1"	0.05"	Not Rated	420	1,200	-20	250	Extended	—	6383K215	0000
				3/8"	1 1/16"	3/8"	1.182"	0.06"	Not Rated	630	1,200	-20	250	Extended	—	6383K227	0000
				3/8"	1 1/8"	3/8"	1.25"	0.06"	Not Rated	630	1,200	-20	250	Extended	—	6383K232	0000
				7/16"	1 1/16"	3/8"	1.182"	0.06"	Not Rated	630	1,200	-20	250	Extended	—	6383K224	0000
				1/2"	1 1/8"	3/8"	1.25"	0.06"	Not Rated	310	1,000	-20	250	Extended	—	6383K234	00000
				1/2"	1 3/8"	7/16"	1.5"	0.06"	Not Rated	450	1,000	-20	250	Extended	—	6383K241	00000
				1/2"	1 1/2"	5/8"	1.625"	0.06"	Not Rated	1,300	1,200	-20	250	Extended	—	6383K245	00000
				1/2"	1 3/4"	9/16"	1.875"	0.06"	Not Rated	1,400	1,200	-20	250	Extended	—	6383K253	00000
				5/8"	1 3/8"	7/16"	1.5"	0.06"	Not Rated	450	1,000	-20	250	Extended	—	6383K244	00000


				5/8"	1 1/2"	7/16"	1.625"	0.06"	Not Rated	1,300	1,200	-20	250	Extended	—	6383K247	00000
				3/4"	1 3/4"	9/16"	1.875"	0.06"	Not Rated	1,550	1,200	-20	250	Extended	—	6383K251	00000
				1"	2"	1/2"	2.125"	0.06"	Not Rated	820	1,000	-20	250	Extended	—	6383K257	00000
				1.5 mm	4 mm	1.2 mm	5 mm	0.4 mm	3	20	120,000	-50	300	Standard	681	57155K411	00000
				3 mm	6 mm	2 mm	7.2 mm	0.6 mm	3	40	96,000	-50	300	Standard	63	57155K424	0000
				3 mm	10 mm	4 mm	11.5 mm	1 mm	3	140	78,000	-50	300	Standard	623	57155K435	00000
				4 mm	7 mm	2 mm	8.2 mm	0.6 mm	3	60	82,000	-50	300	Standard	74	57155K437	00000
				4 mm	8 mm	2 mm	9.2 mm	0.6 mm	3	80	79,000	-50	300	Standard	84	57155K439	00000
				4 mm	10 mm	3 mm	11.2 mm	0.6 mm	3	150	70,000	-50	300	Standard	104	57155K444	00000
				4 mm	12 mm	4 mm	13.5 mm	1 mm	3	210	67,000	-50	300	Standard	604	57155K448	00000


				5 mm	8 mm	2 mm	9.2 mm	0.6 mm	3	60	74,000	-50	300	Standard	85	57155K455	00000
				5 mm	9 mm	2.5 mm	10.2 mm	0.6 mm	3	90	71,000	-50	300	Standard	95	57155K457	00000
				5 mm	10 mm	3 mm	11.2 mm	0.6 mm	3	90	71,000	-50	300	Standard	105	57155K459	00000
				5 mm	11 mm	3 mm	12.5 mm	0.8 mm	3	160	64,000	-50	300	Standard	685	57155K462	00000
				5 mm	14 mm	5 mm	16 mm	1 mm	3	290	56,000	-50	300	Standard	605	57155K466	00000
				5 mm	16 mm	5 mm	18 mm	1 mm	3	380	52,000	-50	300	Standard	625	57155K468	00000
				5 mm	19 mm	6 mm	22 mm	1.5 mm	3	520	45,000	-50	300	Standard	635	57155K471	00000
				6 mm	10 mm	2.5 mm	11.2 mm	0.6 mm	3	110	64,000	-50	300	Standard	106	57155K472	00000
				6 mm	13 mm	3.5 mm	15 mm	1 mm	3	240	56,000	-50	300	Standard	686	57155K476	00000
				6 mm	15 mm	5 mm	17 mm	1.2 mm	3	300	54,000	-50	300	Standard	696	57155K478	00000


				6 mm	17 mm	6 mm	19 mm	1.2 mm	3	500	49,000	-50	300	Standard	606	57155K481	00000
				6 mm	19 mm	6 mm	22 mm	1.5 mm	3	520	45,000	-50	300	Standard	626	57155K483	00000
				7 mm	11 mm	2.5 mm	12.2 mm	0.6 mm	3	100	59,000	-50	300	Standard	117	57155K485	00000
				8 mm	14 mm	3.5 mm	15.6 mm	0.8 mm	3	180	50,000	-50	300	Standard	148	57155K496	0000
				8 mm	16 mm	4 mm	18 mm	1 mm	3	280	47,000	-50	300	Standard	688	57155K498	00000
				8 mm	19 mm	6 mm	22 mm	1.5 mm	3	500	44,000	-50	300	Standard	698	57155K511	00000
				8 mm	22 mm	7 mm	25 mm	1.5 mm	3	740	39,000	-50	300	Standard	608	57155K513	00000
				9 mm	20 mm	6 mm	23 mm	1.5 mm	3	550	42,000	-50	300	Standard	699	57155K516	00000
				9 mm	24 mm	7 mm	27 mm	1.5 mm	3	750	36,000	-50	300	Standard	609	57155K518	00000
				10 mm	15 mm	3 mm	16.5 mm	0.8 mm	1	190	17,000	-50	280	Standard	6700	4390N111	00000


				10 mm	19 mm	5 mm	21 mm	1 mm	1	380	40,000	-50	280	Standard	6800	4390N113	00000
				10 mm	19 mm	7 mm	21 mm	1.5 mm	1	380	40,000	-50	280	Standard	63800	4390N115	00000
				10 mm	22 mm	6 mm	25 mm	1.5 mm	1	600	37,000	-50	280	Standard	6900	4390N117	00000
				12 mm	18 mm	4 mm	19.5 mm	0.8 mm	1	205	15,000	-50	280	Standard	6701	4390N119	00000
12 mm				21 mm	5 mm	23 mm	1.1 mm	1	430	36,000	-50	280	Standard	6801	4390N122	00000
12 mm	21 mm			7 mm	23 mm	1.5 mm	1	430	36,000	-50	280	Standard	63801	4390N124	00000
12 mm	24 mm			6 mm	26.5 mm	1.5 mm	1	640	33,000	-50	280	Standard	6901	4390N125	00000
15 mm	21 mm			4 mm	22.5 mm	0.8 mm	1	210	13,000	-50	280	Standard	6702	4390N127	00000
15 mm	24 mm			5 mm	26 mm	1.1 mm	1	460	31,000	-50	280	Standard	6802	4390N129	00000
17 mm	23 mm	4 mm		24.5 mm	0.8 mm	1	220	11,000	-50	280	Standard	6703	4390N135	00000
17 mm	30 mm	7 mm	32.5 mm	1.5 mm	1	1,000	26,000	-50	280	Standard	6903	4390N137	00000
20 mm	27 mm	4 mm	28.5 mm	0.8 mm	1	225	10,000	-50	280	Standard	6704	4390N138	00000
20 mm	32 mm	7 mm	35 mm	1.5 mm	1	900	25,000	-50	280	Standard	6804	4390N139	00000
25 mm	32 mm	4 mm	34 mm	1 mm	1	245	8,000	-50	280	Standard	6705	4390N142	00000
30 mm	37 mm	4 mm	39 mm	1 mm	1	250	7,000	-50	280	Standard	6706	4390N145	00000



		Corrosion-Resistant 440C Stainless Steel

		3/64"	5/32"	1/16"	0.203"	0.01"	5	30	120,000	-65	250	Standard	R0	57155K201	0000


		5/64"	1/4"	3/32"	0.296"	0.02"	5	70	80,000	-65	250	Standard	R1-4	57155K202	0000
		3/32"	3/16"	1/16"	0.234"	0.02"	5	40	95,000	-65	250	Standard	R133	57155K203	0000
		3/32"	5/16"	7/64"	0.359"	0.02"	5	120	71,000	-65	250	Standard	R1-5	57155K204	0000
		1/8"	1/4"	3/32"	0.296"	0.02"	5	60	80,000	-65	250	Standard	R144	57155K205	0000
		1/8"	5/16"	7/64"	0.359"	0.02"	5	120	71,000	-65	250	Standard	R2-5	57155K206	0000
		1/8"	3/8"	5/32"	0.44"	0.03"	5	140	67,000	-65	250	Standard	R2	57155K207	0000
		5/32"	5/16"	7/64"	0.359"	0.02"	5	80	63,000	-65	250	Standard	R155	57155K208	0000
		3/16"	5/16"	7/64"	0.359"	0.02"	5	80	63,000	-65	250	Standard	R156	57155K209	0000
		3/16"	3/8"	1/8"	0.422"	0.02"	5	160	60,000	-65	250	Standard	R166	57155K301	0000
		3/16"	1/2"	5/32"	0.565"	0.04"	5	290	50,000	-65	250	Standard	R3	57155K302	0000


		1/4"	3/8"	1/8"	0.422"	0.02"	5	80	56,000	-65	250	Standard	R168	57155K303	0000
		1/4"	1/2"	1/8"	0.547"	0.02"	5	240	50,000	-65	250	Standard	R188	57155K304	0000
		1/4"	5/8"	0.196"	0.69"	0.04"	5	330	45,000	-65	250	Standard	R4	57155K305	0000
		5/16"	1/2"	5/32"	0.547"	0.03"	5	120	48,000	-65	250	Standard	R1810	57155K306	0000
		1.5 mm	4 mm	1.2 mm	5 mm	0.4 mm	3	20	120,000	-50	300	Standard	681	57155K412	00000
		2 mm	5 mm	1.5 mm	6.1 mm	0.5 mm	3	30	110,000	-50	300	Standard	682	57155K414	00000
		2 mm	5 mm	2 mm	6.2 mm	0.6 mm	3	30	110,000	-50	300	Standard	52	57155K416	00000
		2 mm	6 mm	2.5 mm	7.2 mm	0.6 mm	3	60	100,000	-50	300	Standard	62	57155K421	00000
		3 mm	6 mm	2 mm	7.2 mm	0.6 mm	3	30	96,000	-50	300	Standard	63	57155K425	00000
		3 mm	7 mm	2 mm	8.1 mm	0.5 mm	3	50	88,000	-50	300	Standard	683	57155K427	00000


		3 mm	8 mm	3 mm	9.5 mm	0.7 mm	3	100	82,000	-50	300	Standard	693	57155K429	00000
		3 mm	10 mm	4 mm	11.5 mm	1 mm	3	110	78,000	-50	300	Standard	623	57155K436	00000
		4 mm	7 mm	2 mm	8.2 mm	0.6 mm	3	50	82,000	-50	300	Standard	74	57155K438	00000
		4 mm	8 mm	2 mm	9.2 mm	0.6 mm	3	70	79,000	-50	300	Standard	84	57155K441	00000
		4 mm	9 mm	2.5 mm	10.3 mm	0.6 mm	3	120	75,000	-50	300	Standard	684	57155K443	00000
		4 mm	12 mm	4 mm	13.5 mm	1 mm	3	170	67,000	-50	300	Standard	604	57155K449	00000
		4 mm	13 mm	5 mm	15 mm	1 mm	3	230	60,000	-50	300	Standard	624	57155K452	00000
		5 mm	8 mm	2 mm	9.2 mm	0.6 mm	3	50	74,000	-50	300	Standard	85	57155K456	00000
		5 mm	9 mm	2.5 mm	10.2 mm	0.6 mm	3	70	71,000	-50	300	Standard	95	57155K458	00000
		5 mm	10 mm	3 mm	11.2 mm	0.6 mm	3	70	71,000	-50	300	Standard	105	57155K461	00000


		5 mm	11 mm	3 mm	12.5 mm	0.8 mm	3	120	64,000	-50	300	Standard	685	57155K463	00000
		5 mm	13 mm	4 mm	15 mm	1 mm	3	190	59,000	-50	300	Standard	695	57155K465	00000
		5 mm	14 mm	5 mm	16 mm	1 mm	3	230	56,000	-50	300	Standard	605	57155K467	00000
		5 mm	16 mm	5 mm	18 mm	1 mm	3	310	52,000	-50	300	Standard	625	57155K469	00000
		6 mm	10 mm	2.5 mm	11.2 mm	0.6 mm	3	120	64,000	-50	300	Standard	106	57155K473	00000
		6 mm	12 mm	3 mm	13.2 mm	0.6 mm	3	120	59,000	-50	300	Standard	126	57155K475	00000
		6 mm	15 mm	5 mm	17 mm	1.2 mm	3	240	54,000	-50	300	Standard	696	57155K479	00000
		6 mm	17 mm	6 mm	19 mm	1.2 mm	3	400	49,000	-50	300	Standard	606	57155K482	00000
		6 mm	19 mm	6 mm	22 mm	1.5 mm	3	410	45,000	-50	300	Standard	626	57155K484	00000
		7 mm	11 mm	2.5 mm	12.2 mm	0.6 mm	3	80	59,000	-50	300	Standard	117	57155K486	00000


		8 mm	14 mm	3.5 mm	15.6 mm	0.8 mm	3	140	50,000	-50	300	Standard	148	57155K497	00000
		8 mm	16 mm	4 mm	18 mm	1 mm	3	220	47,000	-50	300	Standard	688	57155K499	00000
		8 mm	19 mm	6 mm	22 mm	1.5 mm	3	400	44,000	-50	300	Standard	698	57155K512	00000
		8 mm	22 mm	7 mm	25 mm	1.5 mm	3	590	39,000	-50	300	Standard	608	57155K514	00000
		9 mm	17 mm	4 mm	19 mm	1 mm	3	230	44,000	-50	300	Standard	689	57155K515	00000
		10 mm	15 mm	3 mm	16.5 mm	0.8 mm	1	150	17,000	-50	280	Standard	6700	4390N112	00000
		10 mm	19 mm	5 mm	21 mm	1 mm	1	300	40,000	-50	280	Standard	6800	4390N114	00000
		15 mm	21 mm	4 mm	22.5 mm	0.8 mm	1	165	13,000	-50	280	Standard	6702	4390N128	00000
		15 mm	28 mm	7 mm	30.5 mm	1.5 mm	1	770	29,000	-50	280	Standard	6902	4390N134	00000


Shielded







				Steel

				2 mm	5 mm	2.5 mm	6.2 mm	0.6 mm	3	30	94,000	-50	300	Standard	52-2Z	57155K527	00000


				2.5 mm	6 mm	2.6 mm	7.1 mm	0.8 mm	3	40	81,000	-50	300	Standard	682-2Z	57155K535	00000
				3 mm	6 mm	2.5 mm	7.2 mm	0.6 mm	3	40	81,000	-50	300	Standard	63-2Z	57155K537	00000
				3 mm	8 mm	4 mm	9.5 mm	0.9 mm	3	120	70,000	-50	300	Standard	693-2Z	57155K542	00000
				3 mm	9 mm	5 mm	10.5 mm	1 mm	3	120	66,000	-50	300	Standard	603-2Z	57155K546	00000
				4 mm	7 mm	2.5 mm	8.2 mm	0.6 mm	3	60	71,000	-50	300	Standard	74-2Z	57155K551	00000
				4 mm	8 mm	3 mm	9.2 mm	0.6 mm	3	80	67,000	-50	300	Standard	84-2Z	57155K553	00000
				4 mm	10 mm	4 mm	11.2 mm	0.8 mm	3	150	59,000	-50	300	Standard	104-2Z	57155K555	00000
				4 mm	11 mm	4 mm	12.5 mm	1 mm	3	210	57,000	-50	300	Standard	694-2Z	57155K557	00000
				4 mm	16 mm	5 mm	18 mm	1 mm	3	300	46,000	-50	300	Standard	634-2Z	57155K564	00000
				5 mm	8 mm	2.5 mm	9.2 mm	0.6 mm	3	60	63,000	-50	300	Standard	85-2Z	57155K566	00000


				5 mm	9 mm	3 mm	10.2 mm	0.6 mm	3	90	60,000	-50	300	Standard	95-2Z	57155K643	00000
				5 mm	10 mm	4 mm	11.2 mm	0.8 mm	3	90	60,000	-50	300	Standard	105-2Z	57155K568	00000
				5 mm	11 mm	4 mm	12.6 mm	0.8 mm	3	160	54,000	-50	300	Standard	115-2Z	57155K571	00000
				5 mm	11 mm	5 mm	12.5 mm	1 mm	3	160	54,000	-50	300	Standard	685-2Z	57155K573	00000
				5 mm	13 mm	4 mm	15 mm	1 mm	3	240	50,000	-50	300	Standard	695-2Z	57155K575	00000
				5 mm	14 mm	5 mm	16 mm	1 mm	3	290	48,000	-50	300	Standard	605-2Z	57155K577	00000
				5 mm	16 mm	5 mm	18 mm	1 mm	3	380	44,000	-50	300	Standard	625-2Z	57155K579	00000
				6 mm	10 mm	3 mm	11.2 mm	0.6 mm	3	110	55,000	-50	300	Standard	106-2Z	57155K584	00000
				6 mm	13 mm	5 mm	15 mm	1.1 mm	3	240	48,000	-50	300	Standard	686-2Z	57155K588	00000
				6 mm	15 mm	5 mm	17 mm	1.2 mm	3	300	46,000	-50	300	Standard	696-2Z	57155K591	00000


				6 mm	17 mm	6 mm	19 mm	1.2 mm	3	500	42,000	-50	300	Standard	606-2Z	57155K593	00000
				6 mm	19 mm	6 mm	22 mm	1.5 mm	3	520	38,000	-50	300	Standard	626-2Z	57155K595	00000
				7 mm	19 mm	6 mm	22 mm	1.5 mm	3	520	38,000	-50	300	Standard	607-2Z	57155K616	00000
				8 mm	12 mm	3.5 mm	13.2 mm	0.8 mm	3	120	46,000	-50	300	Standard	128-2Z	57155K621	00000
				8 mm	14 mm	4 mm	15.6 mm	0.8 mm	3	180	42,000	-50	300	Standard	148-2Z	57155K623	00000
				8 mm	16 mm	5 mm	18 mm	1.1 mm	3	280	40,000	-50	300	Standard	688-2Z	57155K625	00000
				8 mm	19 mm	6 mm	22 mm	1.5 mm	3	500	37,000	-50	300	Standard	698-2Z	57155K627	00000
				8 mm	22 mm	7 mm	25 mm	1.5 mm	3	740	33,000	-50	300	Standard	608-2Z	57155K629	00000
				9 mm	20 mm	6 mm	23 mm	1.5 mm	3	550	35,000	-50	300	Standard	699-2Z	57155K634	00000
				9 mm	24 mm	7 mm	27 mm	1.5 mm	3	750	30,000	-50	300	Standard	609-2Z	57155K636	00000


				10 mm	15 mm	4 mm	16.5 mm	0.8 mm	1	190	15,000	-50	300	Standard	6700-2Z	4390N148	00000
				10 mm	19 mm	5 mm	21 mm	1 mm	1	380	34,000	-50	300	Standard	6800-2Z	4390N151	00000
				10 mm	22 mm	6 mm	25 mm	1.5 mm	1	600	31,000	-50	300	Standard	6900-2Z	4390N155	00000
				12 mm	18 mm	4 mm	19.5 mm	0.8 mm	1	200	13,000	-50	300	Standard	6701-2Z	4390N157	00000
				12 mm	21 mm	5 mm	23 mm	1.1 mm	1	430	30,000	-50	300	Standard	6801-2Z	4390N159	00000
				12 mm	21 mm	7 mm	23 mm	1.5 mm	1	430	30,000	-50	300	Standard	63801-2Z	4390N162	00000
				12 mm	24 mm	6 mm	26.5 mm	1.5 mm	1	640	28,000	-50	300	Standard	6901-2Z	4390N163	00000
				15 mm	21 mm	4 mm	22.5 mm	0.8 mm	1	210	11,000	-50	300	Standard	6702-2Z	4390N165	00000
				15 mm	24 mm	5 mm	26 mm	1.1 mm	1	460	26,000	-50	300	Standard	6802-2Z	4390N166	00000
				15 mm	24 mm	7 mm	26 mm	1.5 mm	1	460	26,000	-50	300	Standard	63802-2Z	4390N168	00000


				15 mm	28 mm	7 mm	30.5 mm	1.5 mm	1	970	24,000	-50	300	Standard	6902-2Z	4390N169	00000
				17 mm	23 mm	4 mm	24.5 mm	0.8 mm	1	220	9,500	-50	300	Standard	6703-2Z	4390N172	00000
				17 mm	26 mm	5 mm	28 mm	1.1 mm	1	500	24,000	-50	300	Standard	6803-2Z	4390N173	00000
				17 mm	30 mm	7 mm	32.5 mm	1.5 mm	1	1,000	22,000	-50	300	Standard	6903-2Z	4390N174	00000
20 mm				27 mm	4 mm	28.5 mm	0.8 mm	1	225	8,500	-50	300	Standard	6704-2Z	4390N175	00000
20 mm	32 mm			7 mm	35 mm	1.5 mm	1	900	21,000	-50	300	Standard	6804-2Z	4390N176	00000
20 mm	37 mm			9 mm	40 mm	2 mm	1	1,400	19,000	-50	300	Standard	6904-2Z	4390N177	00000
25 mm	37 mm			7 mm	40 mm	1.5 mm	1	960	18,000	-50	300	Standard	6805-2Z	4390N178	00000
25 mm	42 mm			9 mm	45 mm	2 mm	1	1,550	16,000	-50	300	Standard	6905-2Z	4390N179	00000
30 mm	42 mm	7 mm		45 mm	1.5 mm	1	1,000	15,000	-50	300	Standard	6806-2Z	4390N181	00000
30 mm	47 mm	9 mm	50 mm	2 mm	1	1,600	14,000	-50	300	Standard	6906-2Z	4390N182	00000



		Corrosion-Resistant 440C Stainless Steel

		3/64"	5/32"	3/32"	0.203"	0.03"	5	30	120,000	-65	250	Standard	R0-2Z	57155K307	00000


		3/64"	5/32"	3/32"	0.203"	0.03"	5	30	120,000	-65	250	Extended	R0-2Z	57155K18	00000
		5/64"	1/4"	9/64"	0.296"	0.03"	5	70	80,000	-65	250	Standard	R1-4-2Z	57155K309	00000
		5/64"	1/4"	9/64"	0.296"	0.03"	5	70	80,000	-65	250	Extended	R1-4-2Z	57155K326	0000
		3/32"	3/16"	3/32"	0.234"	0.03"	5	30	95,000	-65	250	Standard	R133-2Z	57155K311	0000
		3/32"	3/16"	3/32"	0.234"	0.03"	5	30	95,000	-65	250	Extended	R133-2Z	57155K327	00000
		3/32"	5/16"	9/64"	0.359"	0.03"	5	120	71,000	-65	250	Standard	R1-5-2Z	57155K312	00000
		3/32"	5/16"	9/64"	0.359"	0.03"	5	120	71,000	-65	250	Extended	R1-5-2Z	57155K328	00000
		1/8"	1/4"	7/64"	0.296"	0.03"	5	60	80,000	-65	250	Standard	R144-2Z	57155K313	0000
		1/8"	1/4"	7/64"	0.296"	0.03"	5	60	80,000	-65	250	Extended	R144-2Z	57155K329	0000
		1/8"	5/16"	9/64"	0.359"	0.03"	5	120	71,000	-65	250	Standard	R2-5-2Z	57155K314	0000


		1/8"	5/16"	9/64"	0.359"	0.03"	5	120	71,000	-65	250	Extended	R2-5-2Z	57155K331	0000
		1/8"	3/8"	9/64"	0.422"	0.03"	5	140	63,000	-65	250	Standard	R2-6-2Z	57155K315	0000
		1/8"	3/8"	9/64"	0.422"	0.03"	5	140	63,000	-65	250	Extended	R2-6-2Z	57155K332	0000
		1/8"	3/8"	5/32"	0.44"	0.03"	5	140	67,000	-65	250	Standard	R2-2Z	57155K316	0000
		5/32"	5/16"	1/8"	0.359"	0.04"	5	80	63,000	-65	250	Standard	R155-2Z	57155K317	0000
		5/32"	5/16"	1/8"	0.359"	0.04"	5	80	63,000	-65	250	Extended	R155-2Z	57155K2	00000
		3/16"	5/16"	1/8"	0.359"	0.04"	5	80	63,000	-65	250	Standard	R156-2Z	57155K318	0000
		3/16"	5/16"	1/8"	0.359"	0.04"	5	80	63,000	-65	250	Extended	R156-2Z	57155K334	0000
		3/16"	3/8"	1/8"	0.422"	0.03"	5	160	60,000	-65	250	Standard	R166-2Z	57155K319	0000
		3/16"	3/8"	1/8"	0.422"	0.03"	5	160	60,000	-65	250	Extended	R166-2Z	57155K335	0000


		3/16"	1/2"	0.196"	0.565"	0.04"	5	290	50,000	-65	250	Standard	R3-2Z	57155K321	0000
		1/4"	3/8"	1/8"	0.422"	0.04"	5	80	56,000	-65	250	Standard	R168-2Z	57155K322	0000
		1/4"	3/8"	1/8"	0.422"	0.04"	5	80	56,000	-65	250	Extended	R168-2Z	57155K336	0000
		1/4"	1/2"	3/16"	0.547"	0.05"	5	240	50,000	-65	250	Standard	R188-2Z	57155K323	0000
		1/4"	1/2"	3/16"	0.547"	0.05"	5	240	50,000	-65	250	Extended	R188-2Z	57155K337	0000
		1/4"	5/8"	0.196"	0.69"	0.04"	5	330	45,000	-65	250	Standard	R4-2Z	57155K324	0000
		5/16"	1/2"	5/32"	0.547"	0.03"	5	120	48,000	-65	250	Standard	R1810-2Z	57155K325	0000
		5/16"	1/2"	5/32"	0.547"	0.03"	5	120	48,000	-65	250	Extended	R1810-2Z	57155K338	0000
		1.5 mm	4 mm	2 mm	5 mm	0.6 mm	3	20	100,000	-50	300	Standard	681-2Z	57155K519	00000
		2 mm	5 mm	2.3 mm	6.1 mm	0.6 mm	3	30	94,000	-50	300	Standard	682-2Z	57155K526	00000


		2 mm	5 mm	2.5 mm	6.2 mm	0.6 mm	3	30	94,000	-50	300	Standard	52-2Z	57155K528	00000
		2 mm	6 mm	3 mm	7.5 mm	0.8 mm	3	60	86,000	-50	300	Standard	692-2Z	57155K531	00000
		3 mm	6 mm	2.5 mm	7.2 mm	0.6 mm	3	30	81,000	-50	300	Standard	63-2Z	57155K538	00000
		3 mm	7 mm	3 mm	8.1 mm	0.8 mm	3	50	74,000	-50	300	Standard	683-2Z	57155K541	00000
		3 mm	8 mm	4 mm	9.5 mm	0.9 mm	3	100	70,000	-50	300	Standard	693-2Z	57155K543	00000
		3 mm	10 mm	4 mm	11.5 mm	1 mm	3	120	66,000	-50	300	Standard	623-2Z	57155K549	00000
		4 mm	7 mm	2.5 mm	8.2 mm	0.6 mm	3	40	71,000	-50	300	Standard	74-2Z	57155K552	00000
		4 mm	8 mm	3 mm	9.2 mm	0.6 mm	3	70	67,000	-50	300	Standard	84-2Z	57155K554	00000
		4 mm	10 mm	4 mm	11.6 mm	0.8 mm	5	130	56,000	-65	250	Standard	104-2Z	7804K129	0000
		4 mm	11 mm	4 mm	12.5 mm	1 mm	3	180	57,000	-50	300	Standard	694-2Z	57155K558	00000


		4 mm	12 mm	4 mm	13.5 mm	1 mm	3	180	57,000	-50	300	Standard	604-2Z	57155K561	00000
		4 mm	13 mm	5 mm	15 mm	1 mm	3	240	51,000	-50	300	Standard	624-2Z	57155K563	00000
		4 mm	16 mm	5 mm	18 mm	1 mm	3	250	46,000	-50	300	Standard	634-2Z	57155K565	00000
		5 mm	8 mm	2.5 mm	9.2 mm	0.6 mm	3	50	63,000	-50	300	Standard	85-2Z	57155K567	00000
		5 mm	9 mm	3 mm	10.2 mm	0.6 mm	5	95	60,000	-65	250	Standard	95-2Z	7804K135	0000
		5 mm	10 mm	4 mm	11.2 mm	0.8 mm	3	70	60,000	-50	300	Standard	105-2Z	57155K569	00000
		5 mm	10 mm	4 mm	11.6 mm	0.8 mm	5	95	60,000	-65	250	Standard	105-2Z	7804K136	0000
		5 mm	11 mm	5 mm	12.5 mm	1 mm	3	120	54,000	-50	300	Standard	685-2Z	57155K574	00000
		5 mm	13 mm	4 mm	15 mm	1 mm	3	190	50,000	-50	300	Standard	695-2Z	57155K576	00000
5 mm		13 mm	4 mm	15 mm	1 mm	5	240	50,000	-65	250	Standard	695-2Z	7804K138	0000
5 mm	14 mm	5 mm	16 mm	1 mm	3	230	48,000	-50	300	Standard	605-2Z	57155K578	00000
5 mm	16 mm	5 mm	18 mm	1 mm	3	310	44,000	-50	300	Standard	625-2Z	57155K581	00000
5 mm	19 mm	6 mm	22 mm	1.5 mm	3	410	38,000	-50	300	Standard	635-2Z	57155K583	00000
6 mm	10 mm	3 mm	11.2 mm	0.6 mm	3	80	55,000	-50	300	Standard	106-2Z	57155K585	00000
6 mm	10 mm	3 mm	11.2 mm	0.6 mm	5	110	53,000	-65	250	Standard	106-2Z	7804K141	00000
6 mm	12 mm	4 mm	13.6 mm	0.8 mm	3	120	50,000	-50	300	Standard	126-2Z	57155K587	00000
6 mm	12 mm	4 mm	13.6 mm	0.8 mm	5	160	50,000	-65	250	Standard	126-2Z	7804K142	0000
6 mm	13 mm	5 mm	15 mm	1.1 mm	3	190	48,000	-50	300	Standard	686-2Z	57155K589	00000
6 mm	13 mm	5 mm	15 mm	1.1 mm	5	240	48,000	-65	250	Standard	686-2Z	7804K143	0000
6 mm	15 mm	5 mm	17 mm	1.2 mm	3	240	46,000	-50	300	Standard	696-2Z	57155K592	00000
6 mm	17 mm	6 mm	19 mm	1.2 mm	3	400	42,000	-50	300	Standard	606-2Z	57155K594	00000
6 mm	19 mm	6 mm	22 mm	1.5 mm	3	410	38,000	-50	300	Standard	626-2Z	57155K596	00000
7 mm	11 mm	3 mm	12.2 mm	0.6 mm	5	100	50,000	-65	250	Standard	117-2Z	7804K157	00000
7 mm	14 mm	5 mm	16 mm	1.1 mm	3	210	44,000	-50	300	Standard	687-2Z	57155K613	00000
8 mm	12 mm	3.5 mm	13.2 mm	0.8 mm	3	90	46,000	-50	300	Standard	128-2Z	57155K622	00000
8 mm	12 mm	3.5 mm	13.6 mm	0.8 mm	5	120	48,000	-65	250	Standard	128-2Z	7804K145	0000
8 mm	14 mm	4 mm	15.6 mm	0.8 mm	3	140	42,000	-50	300	Standard	148-2Z	57155K624	00000
8 mm	14 mm	4 mm	15.6 mm	0.8 mm	5	180	45,000	-65	250	Standard	148-2Z	7804K146	0000
8 mm	16 mm	5 mm	18 mm	1.1 mm	3	220	40,000	-50	300	Standard	688-2Z	57155K626	00000
8 mm	16 mm	5 mm	18 mm	1.1 mm	5	280	43,000	-65	250	Standard	688-2Z	7804K147	0000
8 mm	19 mm	6 mm	22 mm	1.5 mm	3	400	37,000	-50	300	Standard	698-2Z	57155K628	00000
8 mm	22 mm	7 mm	25 mm	1.5 mm	3	590	33,000	-50	300	Standard	608-2Z	57155K631	00000
9 mm	17 mm	5 mm	19 mm	1.1 mm	3	230	37,000	-50	300	Standard	689-2Z	57155K633	00000
9 mm	17 mm	5 mm	19 mm	1.1 mm	5	290	43,000	-65	250	Standard	689-2Z	7804K148	00000
9 mm	20 mm	6 mm	23 mm	1.5 mm	3	440	35,000	-50	300	Standard	699-2Z	57155K635	00000
10 mm	15 mm	4 mm	16.5 mm	0.8 mm	1	150	15,000	-50	300	Standard	6700-2Z	4390N149	00000
10 mm	19 mm	5 mm	21 mm	1 mm	1	300	34,000	-50	300	Standard	6800-2Z	4390N152	00000
10 mm	19 mm	7 mm	21 mm	1.5 mm	1	300	34,000	-50	300	Standard	63800-2Z	4390N154	00000
10 mm	22 mm	6 mm	25 mm	1.5 mm	1	480	31,000	-50	300	Standard	6900-2Z	4390N156	00000
12 mm	18 mm	4 mm	19.5 mm	0.8 mm	1	165	13,000	-50	300	Standard	6701-2Z	4390N158	00000
12 mm	21 mm	5 mm	23 mm	1.1 mm	1	340	30,000	-50	300	Standard	6801-2Z	4390N161	00000
12 mm	24 mm	6 mm	26.5 mm	1.5 mm	1	510	28,000	-50	300	Standard	6901-2Z	4390N164	00000
15 mm	24 mm	5 mm	26 mm	1.1 mm	1	370	26,000	-50	300	Standard	6802-2Z	4390N167	00000
15 mm	28 mm	7 mm	30.5 mm	1.5 mm	1	770	24,000	-50	300	Standard	6902-2Z	4390N171	00000

Sealed







				Steel

				1/4"	11/16"	5/16"	0.813"	0.06"	Not Rated	250	2,500	-20	250	Extended	—	6384K342	00000


				5/16"	7/8"	11/32"	1"	0.06"	Not Rated	320	2,500	-20	250	Extended	—	6384K343	00000
				3/8"	7/8"	11/32"	1"	0.06"	Not Rated	320	2,500	-20	250	Extended	—	6384K344	00000
				3/8"	29/32"	11/32"	1"	0.06"	Not Rated	350	2,500	-20	250	Extended	—	6384K346	00000
				3/8"	1 1/8"	3/8"	1.25"	0.06"	Not Rated	600	2,500	-20	250	Extended	—	6384K348	00000
				1/2"	1 1/8"	3/8"	1.25"	0.06"	Not Rated	310	1,000	-20	250	Extended	—	6384K361	00000
				1/2"	1 3/8"	7/16"	1.5"	0.06"	Not Rated	450	1,000	-20	250	Extended	—	6384K363	00000
				5/8"	1 3/8"	7/16"	1.5"	0.06"	Not Rated	450	1,000	-20	250	Extended	—	6384K365	00000
				3/4"	1 5/8"	1/2"	1.75"	0.06"	Not Rated	1,300	2,500	-20	250	Extended	—	6384K367	00000
				3/4"	1 3/4"	1/2"	1.875"	0.06"	Not Rated	1,300	2,500	-20	250	Extended	—	6384K369	00000
				3/4"	2"	9/16"	2.125"	0.06"	Not Rated	1,450	2,500	-20	250	Extended	—	6384K374	00000


				1"	2"	1/2"	2.125"	0.06"	Not Rated	820	1,000	-20	250	Extended	—	6384K373	00000

Angular Contact Ball Bearings

Support radial and thrust loads at the same time. These bearings are often found inside equipment such as gearboxes and pumps. For example, a bearing inside a gearbox withstands a radial load when the gear is engaged and a momentary thrust load when you shift to a new one. While they don't handle as much force from radial loads as standard bearings, you can pair them with a cylindrical roller bearing to increase their load capacity.

Single Row—Single-row bearings withstand thrust loads from one direction.

Double Row—Double-row bearings handle thrust loads from both directions.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

										Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Material	Dynamic Combined Load Cap., lbf	Max. Rotation Speed, rpm	Lubrication	Contact Angle	Min.	Max.	Bearing Trade No.		Each
Single Row







				Open

				10	30	9	3	Steel	1,550	30,000	Required	40°	-40	300	7200	6680K11	000000


				12	28	8	5	Steel	1,200	31,000	Required	15°	-40	250	7001	2385K101	000000
				12	32	10	3	Steel	1,700	26,000	Required	40°	-40	300	7201	6680K12	00000
				12	37	12	3	Steel	2,350	24,000	Required	40°	-40	300	7301	6680K23	00000
				15	35	11	3	Steel	1,850	24,000	Required	40°	-40	300	7202	6680K13	00000
				15	42	13	3	Steel	2,900	20,000	Required	40°	-40	300	7302	6680K24	00000
				17	40	12	3	Steel	2,300	20,000	Required	40°	-40	300	7203	6680K14	00000
				17	47	14	3	Steel	3,550	19,000	Required	40°	-40	300	7303	6680K25	00000
				20	47	14	3	Steel	2,950	18,000	Required	40°	-40	300	7204	6680K15	00000
				20	52	15	3	Steel	3,900	16,000	Required	40°	-40	300	7304	6680K26	000000
				25	47	12	5	Steel	2,750	32,500	Required	15°	-40	250	7005	2385K102	000000


				25	52	15	3	Steel	3,300	15,000	Required	40°	-40	300	7205	6680K16	000000
				25	62	17	3	Steel	5,400	14,000	Required	40°	-40	300	7305	6680K27	000000
				30	62	16	3	Steel	5,050	13,000	Required	40°	-40	300	7206	6680K17	000000
				30	72	19	3	Steel	7,300	12,000	Required	40°	-40	300	7306	6680K28	000000
				35	62	14	5	Steel	4,500	24,200	Required	15°	-40	250	7007	2385K103	000000
				35	72	17	3	Steel	6,500	11,000	Required	40°	-40	300	7207	6680K18	000000
				35	80	21	3	Steel	8,750	10,000	Required	40°	-40	300	7307	6680K29	000000
				40	68	15	5	Steel	4,800	21,700	Required	15°	-40	250	7008	2385K104	000000
				40	80	18	3	Steel	8,450	11,000	Required	40°	-40	300	7208	6680K19	000000
				40	90	23	3	Steel	10,300	9,000	Required	40°	-40	300	7308	6680K31	000000


				45	75	16	5	Steel	5,700	19,500	Required	15°	-40	250	7009	2385K105	000000
				45	85	19	3	Steel	8,000	9,000	Required	40°	-40	300	7209	6680K21	000000
				45	100	25	3	Steel	12,500	8,000	Required	40°	-40	300	7309	6680K32	000000
				50	80	16	5	Steel	6,050	18,000	Required	15°	-40	250	7010	2385K106	000000
				50	90	20	3	Steel	8,450	8,500	Required	40°	-40	300	7210	6680K22	000000
				50	110	27	3	Steel	15,400	7,500	Required	40°	-40	300	7310	6680K33	000000




						Sealed

						10	30	9	1	Steel	1,150	15,000	Lubricated	40°	-20	230	7200-2RS	6680K34	00000


						12	32	10	1	Steel	1,650	14,000	Lubricated	40°	-20	230	7201-2RS	6680K35	000000
						15	35	11	1	Steel	1,850	24,000	Lubricated	40°	-20	230	7202-2RS	6680K36	000000
						15	42	13	1	Steel	3,150	11,000	Lubricated	40°	-20	230	7302-2RS	6680K44	000000
						17	40	12	1	Steel	2,350	11,000	Lubricated	40°	-20	230	7203-2RS	6680K37	000000
						17	47	14	1	Steel	3,950	13,000	Lubricated	40°	-20	230	7303-2RS	6680K45	000000
						20	47	14	1	Steel	3,100	9,000	Lubricated	40°	-20	230	7204-2RS	6680K38	000000
						20	52	15	1	Steel	4,550	8,500	Lubricated	40°	-20	230	7304-2RS	6680K46	000000
						25	52	15	1	Steel	3,400	8,000	Lubricated	40°	-20	230	7205-2RS	6680K39	000000
						25	62	17	1	Steel	6,250	7,000	Lubricated	40°	-20	230	7305-2RS	6680K47	000000
						30	62	16	1	Steel	4,850	6,300	Lubricated	40°	-20	230	7206-2RS	6680K41	000000


						30	72	19	1	Steel	7,650	6,000	Lubricated	40°	-20	230	7306-2RS	6680K48	000000
35						72	17	1	Steel	6,250	5,600	Lubricated	40°	-20	230	7207-2RS	6680K42	000000
40	80					18	1	Steel	7,600	5,000	Lubricated	40°	-20	230	7208-2RS	6680K43	000000
40	90					23	1	Steel	11,900	4,500	Lubricated	40°	-20	230	7308-2RS	6680K49	000000


Double Row







						Open

						10	30	14	1	Steel	1,700	22,000	Required	30°	-40	250	3200	8828T111	00000


						12	32	15.9	1	Steel	2,250	20,000	Required	30°	-40	250	3201	8828T112	00000
						15	35	15.9	1	Steel	2,500	17,000	Required	30°	-40	250	3202	8828T113	00000
						17	40	17.5	1	Steel	3,200	15,000	Required	30°	-40	250	3203	8828T114	00000
						17	47	22.2	1	Steel	4,850	14,000	Required	30°	-40	250	3303	8828T122	00000
						20	47	20.6	3	Steel	4,450	14,000	Required	30°	-40	250	3204	8828T115	00000
						20	52	22.2	3	Steel	5,300	13,000	Required	30°	-40	250	3304	8828T123	000000
						25	52	20.6	3	Steel	4,850	12,000	Required	30°	-40	250	3205	8828T116	00000
						25	62	25.4	3	Steel	7,150	11,000	Required	30°	-40	250	3305	8828T124	000000
						30	62	23.8	3	Steel	6,700	10,000	Required	30°	-40	250	3206	8828T117	000000
						35	72	27	3	Steel	8,950	9,000	Required	30°	-40	250	3207	8828T118	000000


						40	80	30.2	3	Steel	10,600	8,000	Required	30°	-40	250	3208	8828T119	000000
						50	90	30.2	3	Steel	11,400	7,000	Required	30°	-40	250	3210	8828T121	000000




								Shielded

								10	30	14	1	Steel	1,700	24,000	Lubricated	30°	-40	250	3200-2Z	8828T211	000000


								12	32	15.9	1	Steel	2,250	22,000	Lubricated	30°	-40	250	3201-2Z	8828T212	000000
								15	35	15.9	1	Steel	2,500	18,000	Lubricated	30°	-40	250	3202-2Z	8828T213	000000
								17	40	17.5	1	Steel	3,200	16,000	Lubricated	30°	-40	250	3203-2Z	8828T214	00000
								17	47	22.2	1	Steel	4,850	14,000	Lubricated	30°	-40	250	3303-2Z	8828T222	000000
				20				47	20.6	3	Steel	4,450	14,000	Lubricated	30°	-40	300	3204-2Z	8828T215	000000
				20	52			22.2	3	Steel	5,300	13,000	Lubricated	30°	-40	300	3304-2Z	8828T223	000000
				25	52			20.6	3	Steel	4,850	12,000	Lubricated	30°	-40	300	3205-2Z	8828T216	000000
				25	62			25.4	3	Steel	7,150	11,000	Lubricated	30°	-40	300	3305-2Z	8828T224	000000
				30	62			23.8	3	Steel	6,700	10,000	Lubricated	30°	-40	250	3206-2Z	8828T217	000000
				35	72			27	3	Steel	8,950	9,000	Lubricated	30°	-40	300	3207-2Z	8828T218	000000


				40	80			30.2	3	Steel	10,600	8,000	Lubricated	30°	-40	300	3208-2Z	8828T219	000000
				50	90			30.2	3	Steel	11,400	7,000	Lubricated	30°	-40	300	3210-2Z	8828T221	000000




								Sealed

								10	30	14	1	Steel	1,700	17,000	Lubricated	30°	-40	210	3200-2RS	8828T311	000000


								12	32	15.9	1	Steel	2,250	15,000	Lubricated	30°	-40	210	3201-2RS	8828T312	000000
								15	35	15.9	1	Steel	2,500	14,000	Lubricated	30°	-40	210	3202-2RS	8828T313	000000
								17	40	17.5	1	Steel	3,200	12,000	Lubricated	30°	-40	210	3203-2RS	8828T314	00000
								17	47	22.2	1	Steel	4,850	11,000	Lubricated	30°	-40	210	3303-2RS	8828T322	000000
								20	47	20.6	3	Steel	4,450	10,000	Lubricated	30°	-40	210	3204-2RS	8828T315	000000
								20	52	22.2	3	Steel	5,300	9,000	Lubricated	30°	-40	210	3304-2RS	8828T323	000000
25								52	20.6	3	Steel	4,850	8,500	Lubricated	30°	-40	210	3205-2RS	8828T316	000000
25	62							25.4	3	Steel	7,150	7,500	Lubricated	30°	-40	210	3305-2RS	8828T324	000000
30	62							23.8	3	Steel	6,700	7,500	Lubricated	30°	-40	210	3206-2RS	8828T317	000000
35	72							27	3	Steel	8,950	6,300	Lubricated	30°	-40	210	3207-2RS	8828T318	000000


40	80	30.2	3					Steel	10,600	5,600	Lubricated	30°	-40	210	3208-2RS	8828T319	000000
50	90	30.2	3					Steel	11,400	4,800	Lubricated	30°	-40	210	3210-2RS	8828T321	000000

High-Precision Ball Bearings

The most precise bearings we offer, with tolerances tighter than a speck of dust. Rated ABEC 7 out of 9, they meet strict tolerance standards established by the Annular Bearing Engineers Committee (ABEC). You'll find them in equipment that requires both high speed and pinpoint accuracy, such as gyroscopes.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.

							Temp. Range, ° F
	For Shaft Dia.	For Housing ID	Wd.	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Open







				Corrosion-Resistant 440C Stainless Steel

				0.04"	1/8"	3/64"	7	5	100,000	-10	240	Standard	R09	3826T1	000000


				3/64"	5/32"	1/16"	7	15	100,000	-10	240	Standard	R0	3826T2	00000
				0.055"	3/16"	5/64"	7	30	100,000	-10	240	Standard	R1	3826T3	00000
				5/64"	1/4"	3/32"	7	35	100,000	-10	240	Standard	R1-4	3826T4	00000
				3/32"	3/16"	1/16"	7	20	100,000	-10	240	Standard	R133	3826T5	00000
				3/32"	5/16"	7/64"	7	75	74,000	-10	240	Standard	R1-5	3826T6	00000
				1/8"	1/4"	3/32"	7	40	84,000	-10	240	Standard	R144	3826T7	00000
				1/8"	5/16"	7/64"	7	75	74,000	-10	240	Standard	R2-5	3826T8	00000
				1/8"	3/8"	5/32"	7	90	61,000	-10	240	Standard	R2	3826T9	00000
				5/32"	5/16"	7/64"	7	55	68,000	-10	240	Standard	R155	3826T11	00000
				3/16"	5/16"	7/64"	7	40	63,000	-10	240	Standard	R156	3826T12	00000


				3/16"	3/8"	1/8"	7	100	56,000	-10	240	Standard	R166	3826T13	00000
				3/16"	1/2"	5/32"	7	230	45,000	-10	240	Standard	R3	3826T14	00000
				1/4"	3/8"	1/8"	7	45	50,000	-10	240	Standard	R168	3826T15	00000
				1/4"	1/2"	1/8"	7	160	42,000	-10	240	Standard	R188	3826T16	00000
				1/4"	5/8"	0.196"	7	250	36,000	-10	240	Standard	R4	3826T17	00000
				5/16"	1/2"	5/32"	7	120	39,000	-10	240	Standard	R1810	3826T18	00000
				1 mm	3 mm	1 mm	7	8	100,000	-30	280	Standard	—	7487N11	00000
				2 mm	4 mm	1.2 mm	7	18	100,000	-30	280	Standard	—	7487N13	00000
				2 mm	5 mm	1.5 mm	7	22	100,000	-30	280	Standard	—	7487N14	00000
				2 mm	6 mm	2.3 mm	7	37	100,000	-30	280	Standard	—	7487N15	00000


				3 mm	8 mm	3 mm	7	75	73,000	-30	280	Standard	—	7487N16	00000
				3 mm	10 mm	4 mm	7	90	62,000	-30	280	Standard	—	7487N17	00000
				4 mm	13 mm	5 mm	7	205	44,000	-30	280	Standard	—	7487N18	00000
				5 mm	8 mm	2 mm	7	50	62,000	-30	280	Standard	—	7487N19	00000
				5 mm	11 mm	3 mm	7	115	50,000	-30	280	Standard	—	7487N21	00000
				5 mm	16 mm	5 mm	7	260	38,000	-30	280	Standard	—	7487N23	00000
				6 mm	10 mm	2.5 mm	7	70	50,000	-30	280	Standard	—	7487N25	00000
				6 mm	13 mm	3.5 mm	7	160	42,000	-30	280	Standard	—	7487N26	00000
				6 mm	15 mm	5 mm	7	230	38,000	-30	280	Standard	—	7487N27	00000
				7 mm	11 mm	2.5 mm	7	80	44,000	-30	280	Standard	—	7487N29	00000


				7 mm	14 mm	3.5 mm	7	160	38,000	-30	280	Standard	—	7487N31	00000
				8 mm	12 mm	2.5 mm	7	85	40,000	-30	280	Standard	—	7487N34	00000
				8 mm	16 mm	4 mm	7	220	33,000	-30	280	Standard	—	7487N35	00000
				8 mm	22 mm	7 mm	7	480	27,000	-30	280	Standard	—	7487N36	00000
				9 mm	17 mm	4 mm	7	235	31,000	-30	280	Standard	—	7487N38	00000
				10 mm	15 mm	3 mm	7	135	32,000	-30	280	Standard	—	7487N39	00000


				Shielded







Corrosion-Resistant 440C Stainless Steel

3/64"	5/32"							3/32"	7	15	80,000	-10	240	Standard	R0-2Z	3759T41	00000


0.055"	3/16"							7/64"	7	25	68,000	-10	240	Standard	R1-2Z	3759T42	00000
5/64"	1/4"	9/64"						7	35	48,000	-10	240	Standard	R1-4-2Z	3759T43	00000
3/32"	3/16"	3/32"	7					15	34,000	-10	240	Standard	R133-2Z	3759T44	00000
3/32"	5/16"	9/64"	7					60	34,000	-10	240	Standard	R1-5-2Z	3759T45	00000
1/8"	1/4"	7/64"	7					30	25,000	-10	240	Standard	R144-2Z	3759T46	00000
1/8"	5/16"	9/64"	7					60	25,000	-10	240	Standard	R2-5-2Z	3759T47	00000
1/8"	3/8"	9/64"	7					60	25,000	-10	240	Standard	R2-6-2Z	3759T48	00000
1/8"	3/8"	5/32"	7					65	25,000	-10	240	Standard	R2-2Z	3759T49	00000
1/8"	1/2"	11/64"	7					65	25,000	-10	240	Standard	R2A-2Z	3759T51	00000
5/32"	5/16"	1/8"	7					40	20,000	-10	240	Standard	R155-2Z	3759T52	00000


3/16"	5/16"	1/8"	7					40	17,000	-10	240	Standard	R156-2Z	3759T53	00000
3/16"	3/8"	1/8"	7					75	17,000	-10	240	Standard	R166-2Z	3759T54	00000
3/16"	1/2"	0.196"	7					140	17,000	-10	240	Standard	R3-2Z	3759T55	00000
1/4"	3/8"	1/8"	7					40	15,000	-10	240	Standard	R168-2Z	3759T56	00000
1/4"	1/2"	3/16"	7					85	13,000	-10	240	Standard	R188-2Z	3759T57	00000
1/4"	5/8"	0.196"	7					150	13,000	-10	240	Standard	R4-2Z	3759T58	00000
5/16"	1/2"	5/32"	7					90	10,000	-10	240	Standard	R1810-2Z	3759T59	00000
1.5 mm	4 mm	2 mm	7					19	100,000	-30	280	Standard	—	7487N42	00000
2.5 mm	8 mm	2.8 mm	7					55	76,000	-30	280	Standard	—	7487N44	00000
3 mm	6 mm	2 mm	7					41	89,000	-30	280	Standard	—	7487N46	00000


3 mm	6 mm	2.5 mm	7					41	89,000	-30	280	Standard	—	7487N45	00000
3 mm	7 mm	3 mm	7					55	80,000	-30	280	Standard	—	7487N47	00000
3 mm	8 mm	3 mm	7					75	73,000	-30	280	Standard	—	7487N48	00000
5 mm	8 mm	3 mm	7					50	62,000	-30	280	Standard	—	7487N49	00000
5 mm	11 mm	5 mm	7					115	50,000	-30	280	Standard	—	7487N51	00000
5 mm	13 mm	4 mm	7					185	44,000	-30	280	Standard	—	7487N52	00000
5 mm	16 mm	5 mm	7					260	38,000	-30	280	Standard	—	7487N53	00000
6 mm	10 mm	3 mm	7					70	50,000	-30	280	Standard	—	7487N55	00000
6 mm	13 mm	5 mm	7					160	42,000	-30	280	Standard	—	7487N56	00000
6 mm	15 mm	5 mm	7					230	38,000	-30	280	Standard	—	7487N57	00000


6 mm	19 mm	6 mm	7					300	32,000	-30	280	Standard	—	7487N58	00000
7 mm	11 mm	3 mm	7					80	44,000	-30	280	Standard	—	7487N59	00000
8 mm	16 mm	5 mm	7					220	33,000	-30	280	Standard	—	7487N64	00000
8 mm	16 mm	6 mm	7					220	33,000	-30	280	Standard	—	7487N65	00000
9 mm	17 mm	6 mm	7					235	31,000	-30	280	Standard	—	7487N67	00000
10 mm	19 mm	5 mm	7					290	28,000	-30	280	Standard	—	7487N68	00000
10 mm	19 mm	7 mm	7					290	28,000	-30	280	Standard	—	7487N69	00000

Ball Bearings for Food and Beverage

Food production rolls along smoothly on these bearings. Greased with FDA-compliant lubricant, they’re safe to install on food-processing equipment, such as conveyor belts, so long as they don’t directly touch the food. The lubricant is a solid material that fills the space between the balls and releases oil over time, so you'll never need to add more.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

							Temp. Range, ° F
	For Shaft Dia.	For Housing ID	Wd.	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Inner Ring Type	Food Industry Std.	Bearing Trade No.		Each
Open







				Corrosion-Resistant 440C Stainless Steel

				1/8"	3/8"	5/32"	1	120	50,000	-20	210	Standard	FDA Compliant 21 CFR 178.3570	R2	4648K1	000000


				3/16"	1/2"	5/32"	1	250	37,500	-20	210	Standard	FDA Compliant 21 CFR 178.3570	R3	4648K2	00000
				1/4"	5/8"	0.196"	1	280	28,500	-20	210	Standard	FDA Compliant 21 CFR 178.3570	R4	4648K3	00000
				1/4"	3/4"	7/32"	1	440	24,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	R4A	4648K4	00000
				3/8"	7/8"	7/32"	1	630	19,000	-20	210	Standard	FDA Compliant 21 CFR 178.3570	R6	4648K5	00000
				1/2"	1 1/8"	1/4"	1	970	15,000	-20	210	Standard	FDA Compliant 21 CFR 178.3570	R8	4648K6	00000
				5/8"	1 3/8"	9/32"	1	1,100	12,000	-20	210	Standard	FDA Compliant 21 CFR 178.3570	R10	4648K7	00000
				3/4"	1 5/8"	5/16"	1	1,500	10,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	R12	4648K8	00000


				Sealed







								Corrosion-Resistant 440C Stainless Steel

								1/8"	3/8"	5/32"	1	120	50,000	-20	210	Standard	FDA Compliant 21 CFR 178.3570	R2-2RS	4648K9	00000


								3/16"	1/2"	0.196"	1	250	37,500	-20	210	Standard	FDA Compliant 21 CFR 178.3570	R3-2RS	4648K11	00000
								1/4"	5/8"	0.196"	1	280	28,500	-20	210	Standard	FDA Compliant 21 CFR 178.3570	R4-2RS	4648K12	00000
								1/4"	3/4"	9/32"	1	440	24,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	R4A-2RS	4648K13	00000
								3/8"	7/8"	9/32"	1	630	19,000	-20	210	Standard	FDA Compliant 21 CFR 178.3570	R6-2RS	4648K14	00000
								1/2"	1 1/8"	5/16"	1	970	15,000	-20	210	Standard	FDA Compliant 21 CFR 178.3570	R8-2RS	4648K15	00000
								5/8"	1 3/8"	11/32"	1	1,100	12,000	-20	210	Standard	FDA Compliant 21 CFR 178.3570	R10-2RS	4648K16	00000
								3/4"	1 5/8"	7/16"	1	1,750	10,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	R12-2RS	4648K17	00000
								7/8"	1 7/8"	1/2"	1	1,700	20,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	R14-2RS	4648K18	00000
								1"	2"	1/2"	1	1,700	8,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	R16-2RS	4648K19	000000
								3 mm	8 mm	4 mm	1	125	54,500	-40	200	Standard	FDA Compliant 21 CFR 178.3570	693-2RS	4648K317	00000


								3 mm	10 mm	4 mm	1	140	40,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	623-2RS	4648K305	00000
								4 mm	9 mm	4 mm	1	140	46,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	684-2RS	4648K312	00000
								4 mm	12 mm	4 mm	1	215	37,500	-40	200	Standard	FDA Compliant 21 CFR 178.3570	604-2RS	4648K301	00000
								4 mm	13 mm	5 mm	1	290	35,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	624-2RS	4648K306	00000
								4 mm	16 mm	5 mm	1	300	30,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	634-2RS	4648K31	00000
								5 mm	11 mm	5 mm	1	160	37,500	-40	200	Standard	FDA Compliant 21 CFR 178.3570	685-2RS	4648K313	00000
								5 mm	13 mm	4 mm	1	240	33,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	695-2RS	4648K318	00000
								5 mm	14 mm	5 mm	1	290	31,500	-40	200	Standard	FDA Compliant 21 CFR 178.3570	605-2RS	4648K302	00000
								5 mm	16 mm	5 mm	1	380	28,500	-40	200	Standard	FDA Compliant 21 CFR 178.3570	625-2RS	4648K307	00000
								6 mm	13 mm	5 mm	1	240	31,500	-40	200	Standard	FDA Compliant 21 CFR 178.3570	686-2RS	4648K314	00000


								6 mm	15 mm	5 mm	1	300	28,500	-40	200	Standard	FDA Compliant 21 CFR 178.3570	696-2RS	4648K319	00000
								6 mm	17 mm	6 mm	1	500	26,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	606-2RS	4648K303	00000
								6 mm	19 mm	6 mm	1	520	24,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	626-2RS	4648K308	00000
								6 mm	22 mm	7 mm	1	740	33,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	636-2RS	4648K311	00000
								8 mm	16 mm	5 mm	1	280	25,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	688-2RS	4648K315	00000
								8 mm	19 mm	6 mm	1	500	22,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	698-2RS	4648K32	00000
8 mm								22 mm	7 mm	1	740	30,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	608-2RS	4648K304	00000
8 mm	24 mm							8 mm	1	740	27,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	628-2RS	4648K309	00000
9 mm	17 mm							5 mm	1	290	23,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	689-2RS	4648K316	00000
10 mm	15 mm							4 mm	1	190	15,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6700-2RS	4648K321	00000


10 mm	19 mm	5 mm	1					320	20,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6800-2RS	4648K227	00000
10 mm	19 mm	7 mm	1					380	34,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	63800-2RS	4648K327	00000
10 mm	22 mm	6 mm	1					320	18,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6900-2RS	4648K237	00000
10 mm	26 mm	8 mm	1					870	16,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6000-2RS	4648K201	00000
10 mm	30 mm	9 mm	1					970	15,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6200-2RS	4648K211	00000
10 mm	35 mm	11 mm	1					1,500	13,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6300-2RS	4648K219	00000
12 mm	18 mm	4 mm	1					205	13,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6701-2RS	4648K322	00000
12 mm	21 mm	5 mm	1					360	18,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6801-2RS	4648K228	00000
12 mm	24 mm	6 mm	1					550	16,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6901-2RS	4648K238	00000
12 mm	28 mm	8 mm	1					970	15,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6001-2RS	4648K202	00000


12 mm	32 mm	10 mm	1					1,250	13,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6201-2RS	4648K212	00000
12 mm	37 mm	12 mm	1					1,850	12,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6301-2RS	4648K22	00000
15 mm	21 mm	4 mm	1					210	11,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6702-2RS	4648K323	00000
15 mm	24 mm	5 mm	1					390	15,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6802-2RS	4648K229	00000
15 mm	28 mm	7 mm	1	820				14,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6902-2RS	4648K239	00000
15 mm	32 mm	9 mm	1	1,050	12,000			-40	200	Standard	FDA Compliant 21 CFR 178.3570	6002-2RS	4648K203	00000
15 mm	35 mm	11 mm	1	1,450	12,000			-40	200	Standard	FDA Compliant 21 CFR 178.3570	6202-2RS	4648K213	00000
15 mm	42 mm	13 mm	1	2,150	10,000			-40	200	Standard	FDA Compliant 21 CFR 178.3570	6302-2RS	4648K221	00000
17 mm	26 mm	5 mm	1	420	14,000			-40	200	Standard	FDA Compliant 21 CFR 178.3570	6803-2RS	4648K23	00000
17 mm	30 mm	7 mm	1	870	12,000	-40		200	Standard	FDA Compliant 21 CFR 178.3570	6903-2RS	4648K24	00000
17 mm	35 mm	10 mm	1	1,100	11,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6003-2RS	4648K204	00000
17 mm	40 mm	12 mm	1	1,800	10,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6203-2RS	4648K214	00000
17 mm	47 mm	14 mm	1	2,600	9,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6303-2RS	4648K222	00000
20 mm	27 mm	4 mm	1	225	8,500	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6704-2RS	4648K324	00000
20 mm	32 mm	7 mm	1	760	11,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6804-2RS	4648K231	00000
20 mm	37 mm	9 mm	1	1,200	10,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6904-2RS	4648K241	00000
20 mm	42 mm	12 mm	1	1,750	9,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6004-2RS	4648K205	00000
20 mm	47 mm	14 mm	1	2,450	9,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6204-2RS	4648K215	00000
20 mm	52 mm	15 mm	1	3,000	8,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6304-2RS	4648K223	00000
25 mm	32 mm	4 mm	1	245	7,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6705-2RS	4648K325	00000
25 mm	37 mm	7 mm	1	820	9,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6805-2RS	4648K232	00000
25 mm	42 mm	9 mm	1	1,300	9,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6905-2RS	4648K242	000000
25 mm	47 mm	12 mm	1	1,900	8,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6005-2RS	4648K206	00000
25 mm	52 mm	15 mm	1	2,650	8,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6205-2RS	4648K216	00000
25 mm	62 mm	17 mm	1	3,900	7,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6305-2RS	4648K224	000000
30 mm	37 mm	4 mm	1	250	5,500	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6706-2RS	4648K326	00000
30 mm	42 mm	7 mm	1	850	8,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6806-2RS	4648K233	000000
30 mm	55 mm	13 mm	1	2,500	7,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6006-2RS	4648K207	000000
30 mm	62 mm	16 mm	1	3,700	6,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6206-2RS	4648K217	000000
30 mm	72 mm	19 mm	1	5,100	5,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6306-2RS	4648K225	000000
35 mm	47 mm	7 mm	1	900	7,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6807-2RS	4648K234	000000
35 mm	55 mm	10 mm	1	2,050	6,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6907-2RS	4648K244	000000
35 mm	62 mm	14 mm	1	3,050	6,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6007-2RS	4648K208	000000
35 mm	72 mm	17 mm	1	4,900	5,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6207-2RS	4648K218	000000
35 mm	80 mm	21 mm	1	6,350	5,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6307-2RS	4648K226	000000
40 mm	68 mm	15 mm	1	3,200	5,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6008-2RS	4648K209	000000
45 mm	58 mm	7 mm	1	1,150	6,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6809-2RS	4648K236	000000
45 mm	68 mm	12 mm	1	2,650	5,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6909-2RS	4648K246	000000
45 mm	75 mm	16 mm	1	4,000	5,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	6009-2RS	4648K21	000000

Quick-Mount Ball Bearings

Slip onto a shaft and secure with the turn of a screw. You don't need any special tools to mount these bearings.

Set-Screw Shaft Mount—Tighten the screws against the shaft to hold the bearing in place. For high-speed applications, consider clamp-on shaft mounts, which are less likely to slip.

Clamp-On Shaft Mount—The clamp tightens around the shaft for a strong 360° grip. These mounts attach more securely than set screws to reduce vibration. Plus, there aren't any screws pressing into the shaft, so it stays free from damage. Also known as a concentric lock.

Steel and Black-Oxide Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

				Retaining Ring						Temp. Range, ° F
	For Shaft Dia.	For Housing ID	Wd.	OD	Thk.	Bearing Seal Type	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Bearing Trade No.		Each
Set-Screw Shaft Mount







				Steel

				1/2"	1 3/4"	5/8"	1.922"	0.042"	Sealed	Not Rated	2,550	5,000	-20	250	7608-2RS	4768K11	000000


				9/16"	1 3/4"	5/8"	1.922"	0.042"	Sealed	Not Rated	2,550	5,000	-20	250	7609-2RS	4768K12	00000
				5/8"	1 3/4"	5/8"	1.922"	0.042"	Sealed	Not Rated	2,550	5,000	-20	250	7610-2RS	4768K5	00000
				11/16"	1 3/4"	5/8"	1.922"	0.042"	Sealed	Not Rated	2,550	5,000	-20	250	7611-2RS	4768K13	00000
				3/4"	1 3/4"	5/8"	1.922"	0.042"	Sealed	Not Rated	2,550	5,000	-20	250	7612-2RS	4768K6	00000
				13/16"	2"	5/8"	2.156"	0.042"	Sealed	Not Rated	2,950	5,000	-20	250	7613-2RS	4768K14	00000
				7/8"	2"	5/8"	2.156"	0.042"	Sealed	Not Rated	2,950	5,000	-20	250	7614-2RS	4768K15	00000
				15/16"	2"	5/8"	2.156"	0.042"	Sealed	Not Rated	2,950	5,000	-20	250	7615-2RS	4768K16	00000
				1"	2"	5/8"	2.156"	0.042"	Sealed	Not Rated	2,950	5,000	-20	250	7616-2RS	4768K7	00000
				1 1/16"	2 9/16"	3/4"	2.766"	0.065"	Sealed	Not Rated	5,350	5,000	-20	250	7617-2RS	4768K17	00000
				1 1/8"	2 9/16"	3/4"	2.766"	0.065"	Sealed	Not Rated	5,350	5,000	-20	250	7618-2RS	4768K18	00000


				1 1/4"	2 9/16"	3/4"	2.766"	0.065"	Sealed	Not Rated	5,350	5,000	-20	250	7620-2RS	4768K8	00000




						Black-Oxide Steel

						1/2"	1 27/32"	5/8"	2.063"	0.047"	Shielded	1	3,200	9,200	-40	250	ER8	8090T21	00000


						5/8"	1 27/32"	5/8"	2.063"	0.047"	Sealed	Not Rated	2,850	5,000	-20	250	ER10	8090T11	00000
						3/4"	1 27/32"	5/8"	2.063"	0.047"	Sealed	Not Rated	2,850	5,000	-20	250	ER12	8090T12	00000
						7/8"	2 3/64"	3/4"	2.266"	0.047"	Shielded	1	3,450	7,800	-40	250	ER14	8090T22	000000
						15/16"	2 3/64"	3/4"	2.266"	0.047"	Sealed	1	2,800	6,350	-20	220	ER15	8090T27	000000
						1"	2 3/64"	3/4"	2.266"	0.047"	Sealed	Not Rated	3,100	5,000	-20	250	ER16	8090T13	00000
						1 1/16"	2 7/16"	7/8"	2.656"	0.063"	Sealed	1	4,350	5,450	-20	220	ER17	8090T28	000000
						1 1/8"	2 7/16"	7/8"	2.656"	0.063"	Sealed	1	4,850	6,100	-65	250	ER18	8090T57	00000
						1 3/16"	2 7/16"	7/8"	2.656"	0.063"	Sealed	Not Rated	4,350	5,000	-20	250	ER19	8090T14	00000
						1 1/4"	2 27/32"	15/16"	3.078"	0.063"	Sealed	Not Rated	5,750	5,000	-20	250	ER20	8090T15	00000
						1 3/8"	2 27/32"	15/16"	3.078"	0.063"	Shielded	1	6,400	5,000	-40	250	ER22	8090T23	000000


						1 7/16"	2 27/32"	15/16"	3.078"	0.063"	Sealed	Not Rated	5,750	5,000	-20	250	ER23	8090T16	00000
						1 1/2"	3 5/32"	1 3/32"	3.406"	0.063"	Sealed	Not Rated	6,500	5,000	-20	250	ER24	8090T17	000000
						1 5/8"	3 11/32"	1 3/32"	3 19/32"	0.063"	Sealed	1	7,900	3,800	-20	220	ER26	8090T34	000000
						1 11/16"	3 11/32"	1 3/32"	3 19/32"	0.063"	Sealed	1	7,900	3,800	-20	220	ER27	8090T35	000000
						1 3/4"	3 11/32"	1 3/32"	3.578"	0.063"	Shielded	1	8,150	3,900	-40	250	ER28	8090T24	000000
						1 15/16"	3 35/64"	1 1/8"	3.781"	0.094"	Sealed	Not Rated	7,900	5,000	-20	250	ER31	8090T18	000000
						2"	3 15/16"	1 3/16"	4.188"	0.094"	Shielded	1	10,800	3,400	-40	250	ER32	8090T25	000000
						2 3/16"	3 15/16"	1 3/16"	4 3/16"	0.094"	Sealed	1	9,750	3,250	-20	220	ER35	8090T39	000000
						2 1/4"	4 21/64"	1 1/4"	4 37/64"	0.094"	Sealed	1	11,750	3,000	-20	220	ER36	8090T41	000000
						2 3/8"	4 21/64"	1 1/4"	4 37/64"	0.094"	Sealed	1	11,750	3,000	-20	220	ER38	8090T42	000000


						2 7/16"	4 21/64"	1 1/4"	4 37/64"	0.094"	Sealed	1	11,750	3,000	-20	220	ER39	8090T43	000000
						2 1/2"	4 59/64"	1 3/8"	5 9/32"	0.109"	Sealed	1	13,950	2,500	-20	220	ER40	8090T44	000000
						3"	5 33/64"	1 11/16"	5 13/16"	0.109"	Sealed	1	17,400	2,250	-20	220	ER48	8090T48	000000
						20 mm	47 mm	15.9 mm	52.4 mm	1.2 mm	Sealed	1	2,600	7,300	-20	220	ER204	5629N11	000000
						25 mm	52 mm	19.1 mm	57.5 mm	1.2 mm	Sealed	1	2,800	6,350	-20	220	ER205	5629N12	000000
						30 mm	62 mm	22.2 mm	67.5 mm	1.6 mm	Sealed	1	4,350	5,450	-20	220	ER206	5629N13	000000
35 mm						72 mm	23.8 mm	78.2 mm	1.6 mm	Sealed	1	5,750	4,650	-20	220	ER207	5629N14	000000
40 mm	80 mm					27.8 mm	86.5 mm	1.6 mm	Sealed	1	7,300	4,150	-20	220	ER208	5629N15	000000
50 mm	90 mm					28.6 mm	96 mm	2.4 mm	Sealed	1	7,850	3,550	-20	220	ER210	5629N17	000000
70 mm	125 mm					34.9 mm	134.1 mm	2.8 mm	Sealed	1	13,950	2,500	-20	220	ER214	5629N21	000000


Clamp-On Shaft Mount







						Black-Oxide Steel

						3/4"	1 27/32"	5/8"	2.063"	0.047"	Sealed	1	2,600	10,200	-20	220	ER12	6821N11	00000


						1"	2 1/16"	3/4"	2.266"	0.047"	Sealed	1	2,800	9,000	-20	220	ER16	6821N12	00000
						1 1/4"	2 7/16"	7/8"	2.656"	0.063"	Sealed	1	4,350	7,600	-20	220	ER20	6821N15	000000
						1 1/4"	2 27/32"	15/16"	3.078"	0.063"	Sealed	1	5,750	6,500	-20	220	ER20	6821N16	000000
						1 7/16"	2 27/32"	15/16"	3.078"	0.063"	Sealed	1	5,750	6,500	-20	220	ER23	6821N18	000000
						1 1/2"	3 5/32"	1 3/32"	3.406"	0.063"	Sealed	1	7,300	5,850	-20	220	ER24	6821N19	000000
						2"	3 15/16"	1 3/16"	4.188"	0.094"	Sealed	1	9,750	4,500	-20	220	ER32	6821N25	000000
						20 mm	47 mm	16 mm	52 mm	1.2 mm	Shielded	1	2,600	6,450	-20	220	ER204	6821N51	000000
						25 mm	52 mm	19 mm	58 mm	1.2 mm	Shielded	1	2,800	6,350	-20	220	ER205	6821N52	000000
						30 mm	62 mm	22 mm	68 mm	1.6 mm	Shielded	1	4,350	5,450	-20	220	ER206	6821N53	000000
				40 mm		80 mm	28 mm	88 mm	1.6 mm	Shielded	1	7,300	4,150	-20	220	ER208	6821N55	000000


				45 mm	85 mm	28 mm	91 mm	1.6 mm	Shielded	1	7,900	3,800	-20	220	ER209	6821N56	000000

Self-Aligning Ball Bearings

Misalignments correct themselves on the fly in these bearings. Two rows of balls have separate raceways in the inner ring and a shared raceway in the outer ring, so the balls rock back and forth to compensate for misalignment. This construction also reduces noise and vibration.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

								Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Misalignment Capability	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Open







				Steel

				6	19	6	1	560	30,000	4°	Not Rated	210	Standard	126	6660K312	000000


				8	22	7	1	590	40,000	3°	-30	210	Standard	108	6660K11	00000
				10	30	9	1	1,200	22,000	4°	Not Rated	210	Standard	1200	6660K314	00000
				10	30	14	1	1,800	34,000	2.5°	-30	210	Standard	2200	6660K12	000000
				10	35	17	1	2,050	18,000	4°	Not Rated	210	Standard	2300	6660K316	00000
				12	32	10	1	1,250	22,000	4°	Not Rated	210	Standard	1201	6660K317	00000
				12	32	14	1	1,900	30,000	2.5°	-30	210	Standard	2201	6660K13	000000
				15	35	11	1	1,700	18,000	4°	Not Rated	210	Standard	1202	6660K321	00000
				15	35	14	1	1,950	26,000	2.5°	-30	210	Standard	2202	6660K14	000000
				15	42	13	1	2,150	16,000	4°	Not Rated	210	Standard	1302	6660K322	00000
				15	42	17	1	2,750	14,000	4°	Not Rated	210	Standard	2302	6660K323	000000


				17	40	12	1	1,750	16,000	4°	Not Rated	210	Standard	1203	6660K324	00000
				17	40	16	1	2,350	24,000	2.5°	-30	210	Standard	2203	6660K15	000000
				20	47	14	1	2,850	20,000	2.5°	-30	210	Standard	1204	6660K22	00000
				20	47	18	1	3,750	20,000	2.5°	-30	210	Standard	2204	6660K16	000000
				20	52	15	1	2,800	12,000	4°	Not Rated	210	Standard	1304	6660K327	00000
				20	52	21	1	4,050	19,000	3°	-30	210	Standard	2304	6660K53	000000
				25	52	15	1	3,200	18,000	2.5°	-30	210	Standard	1205	6660K23	00000
				25	52	18	1	3,750	18,000	2.5°	-30	210	Standard	2205	6660K17	000000
				25	62	17	1	4,050	10,000	4°	Not Rated	210	Standard	1305	6660K328	00000
				25	62	24	1	6,050	16,000	3°	-30	210	Standard	2305	6660K54	000000


				30	62	16	1	3,550	10,000	4°	Not Rated	210	Standard	1206	6660K329	00000
				30	62	20	1	5,350	15,000	2.5°	-30	210	Standard	2206	6660K18	000000
				30	72	27	1	7,000	13,000	3°	-30	210	Standard	2306	6660K55	000000
				35	72	17	1	3,550	8,500	4°	Not Rated	210	Standard	1207	6660K332	00000
				35	72	23	1	6,750	12,000	2.5°	-30	210	Standard	2207	6660K19	000000
				35	80	21	1	5,650	7,500	4°	Not Rated	210	Standard	1307	6660K333	000000
				35	80	31	1	8,900	12,000	3°	-30	210	Standard	2307	6660K56	000000
				40	80	18	1	4,300	7,500	4°	Not Rated	210	Standard	1208	6660K334	00000
				40	80	23	1	7,150	11,000	2.5°	-30	210	Standard	2208	6660K21	000000
				40	90	23	1	6,650	6,700	4°	Not Rated	210	Standard	1308	6660K335	000000


				45	100	36	1	12,350	5,600	4°	Not Rated	210	Standard	2309	6660K341	000000
				50	110	27	1	9,750	5,600	4°	Not Rated	210	Standard	1310	6660K344	000000
				50	110	40	1	14,600	5,000	4°	Not Rated	210	Standard	2310	6660K345	000000
				55	100	25	1	6,000	6,000	4°	Not Rated	210	Standard	2211	6660K347	000000
				55	120	43	1	17,150	4,800	4°	Not Rated	210	Standard	2311	6660K349	000000
				60	110	28	1	7,600	5,300	4°	Not Rated	210	Standard	2212	6660K352	000000
				65	120	31	1	9,750	4,800	4°	Not Rated	210	Standard	2213	6660K355	000000


				Sealed







	Steel

	10						30	14	1	1,200	17,000	1.5°	-30	210	Standard	2200-2RS	6660K61	000000


	12	32					14	1	1,400	16,000	1.5°	-30	210	Standard	2201-2RS	6660K62	000000
	15	35	14				1	1,650	14,000	1.5°	-30	210	Standard	2202-2RS	6660K63	000000
	17	40	16				1	1,950	12,000	1.5°	-30	210	Standard	2203-2RS	6660K64	000000
	17	47	19				1	2,850	11,000	1.5°	-30	210	Standard	2303-2RS	6660K72	000000
	20	47	18				1	2,850	10,000	1.5°	-30	210	Standard	2204-2RS	6660K65	000000
	20	52	21				1	3,200	9,000	1.5°	-30	210	Standard	2304-2RS	6660K73	000000
	25	52	18				1	3,200	9,000	1.5°	-30	210	Standard	2205-2RS	6660K66	000000
	25	62	24				1	4,250	7,500	1.5°	-30	210	Standard	2305-2RS	6660K74	000000
	30	62	20				1	3,500	7,500	1.5°	-30	210	Standard	2206-2RS	6660K67	000000
	30	72	27				1	5,050	6,700	1.5°	-30	210	Standard	2306-2RS	6660K75	000000


	35	72	23				1	4,250	6,300	1.5°	-30	210	Standard	2207-2RS	6660K68	000000
	35	80	31				1	5,950	5,600	1.5°	-30	210	Standard	2307-2RS	6660K76	000000
	40	80	23				1	4,450	5,600	1.5°	-30	210	Standard	2208-2RS	6660K69	000000

Dry-Running Ball Bearings

Made of naturally slippery plastic so there's no lubricant to maintain or make a mess. These bearings are ideal for spic-and-span spaces since oil won't drip off, wash out, or collect dust over time. They won't rust or warp from moisture, so they stand up to thorough cleanings.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, reducing wear and extending the life of the bearing.

Acetal—The most common choice for plastic bearings, acetal is economical yet still stands up to daily wear and tear.

Chemical-Resistant PVDF—A step up from acetal, PVDF won't corrode when exposed to most strong acids and solvents.

High-Temperature Chemical-Resistant PEEK—The most heat- and chemical-resistant plastic bearings we offer. Even inside autoclaves as hot as 330° F, PEEK won't melt. It also won't degrade when exposed to harsh acids and bases.

316 Stainless Steel Balls—Won't corrode from salt water or harsh chemicals, such as bleach and chlorine found in cleaning solutions.

Glass Balls—Nonmagnetic, so they won't interfere with sensors and other sensitive electronics.

						Temp. Range, ° F				316 Stainless Steel Balls		Glass Balls
	For Shaft Dia.	For Housing ID	Wd.	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	ABEC Rating	Bearing Trade No.		Each		Each
Open







				Acetal

				1/8"	1/2"	5/32"	15	3,100	-40	180	Not Rated	R2A	6455K96	00000	6455K97	000000


				3/16"	1/2"	5/32"	15	3,100	-40	180	Not Rated	R3	6455K1	0000	6455K7	00000
				1/4"	5/8"	0.196"	25	2,300	-40	180	Not Rated	R4	6455K2	0000	6455K8	00000
				1/4"	3/4"	9/32"	25	2,300	-40	180	Not Rated	R4A	6455K13	0000	6455K52	00000
				3/8"	7/8"	7/32"	40	1,600	-40	180	Not Rated	R6	6455K15	0000	6455K54	00000
				3/8"	7/8"	9/32"	40	1,600	-40	180	Not Rated	R6A	6455K3	0000	6455K9	00000
				3/8"	1 1/8"	3/8"	55	1,100	-40	180	Not Rated	R8A	6455K19	0000	6455K58	00000
				3/8"	1 3/8"	7/16"	65	1,000	-40	180	Not Rated	R10B	6455K29	0000	6455K72	00000
				1/2"	1 1/8"	1/4"	55	1,100	-40	180	Not Rated	R8	6455K23	0000	6455K64	00000
				1/2"	1 1/8"	3/8"	55	1,100	-40	180	Not Rated	R8A	6455K4	0000	6455K11	00000
				1/2"	1 3/8"	3/8"	65	1,000	-40	180	Not Rated	R10A	6455K27	0000	6455K68	00000


				1/2"	1 3/8"	7/16"	65	1,000	-40	180	Not Rated	R10B	6455K31	0000	6455K74	00000
				5/8"	1 1/8"	5/16"	55	1,100	-40	180	Not Rated	—	6455K35	0000	———	0
				5/8"	1 1/8"	5/16"	55	1,100	-40	180	Not Rated	R8	———	0	6455K78	00000
				5/8"	1 3/8"	3/8"	65	1,000	-40	180	Not Rated	R10A	6455K37	0000	6455K82	00000
				5/8"	1 3/8"	7/16"	65	1,000	-40	180	Not Rated	R10B	6455K39	0000	6455K84	00000
				3/4"	1 5/8"	5/16"	75	800	-40	180	Not Rated	R12	6455K5	00000	6455K12	00000
				3/4"	1 3/4"	15/32"	75	800	-40	180	Not Rated	1164	6455K41	00000	6455K86	00000
				7/8"	1 7/8"	3/8"	75	800	-40	180	Not Rated	R14	6455K98	00000	6455K99	00000
				1"	1 5/8"	1/2"	75	800	-40	180	Not Rated	1412	6455K43	0000	6455K88	00000
				1"	2"	1/2"	90	700	-40	180	Not Rated	R16	6455K6	00000	6455K14	00000


				4 mm	13 mm	5 mm	15	3,100	-40	180	Not Rated	624	6455K91	0000	———	0
				4 mm	16 mm	5 mm	25	2,300	-40	180	Not Rated	634	6455K111	0000	———	0
				5 mm	16 mm	5 mm	25	2,300	-40	180	Not Rated	625	6455K92	0000	6455K122	00000
				5 mm	19 mm	6 mm	25	2,300	-40	180	Not Rated	635	6455K112	0000	———	0
				6 mm	17 mm	6 mm	25	2,300	-40	180	Not Rated	606	6455K113	0000	———	0
				6 mm	19 mm	6 mm	25	2,300	-40	180	Not Rated	626	6455K93	0000	6455K125	00000
				6 mm	22 mm	7 mm	40	1,600	-40	180	Not Rated	636	6455K114	0000	———	0
				7 mm	19 mm	6 mm	40	1,600	-40	180	Not Rated	607	6455K115	0000	———	0
				7 mm	22 mm	7 mm	40	1,600	-40	180	Not Rated	627	6455K94	0000	6455K128	00000
				8 mm	22 mm	7 mm	40	1,600	-40	180	Not Rated	608	6455K44	0000	6455K131	00000


				8 mm	24 mm	8 mm	40	1,600	-40	180	Not Rated	628	6455K117	00000	6455K132	00000
				8 mm	28 mm	9 mm	55	1,100	-40	180	Not Rated	638	6455K118	00000	———	0
				9 mm	26 mm	8 mm	40	1,600	-40	180	Not Rated	629	6455K95	00000	———	0
				10 mm	26 mm	8 mm	40	1,600	-40	180	Not Rated	6000	6455K137	0000	6455K146	00000
				10 mm	28 mm	8 mm	55	1,100	-40	180	Not Rated	16100	6455K178	00000	———	0
				10 mm	30 mm	9 mm	55	1,100	-40	180	Not Rated	6200	6455K45	00000	———	0
				12 mm	28 mm	8 mm	55	1,100	-40	180	Not Rated	6001	6455K138	00000	6455K147	00000
				12 mm	30 mm	8 mm	55	1,100	-40	180	Not Rated	16101	6455K181	00000	———	0
				12 mm	32 mm	10 mm	55	1,100	-40	180	Not Rated	6201	6455K46	00000	———	0
				15 mm	32 mm	9 mm	55	1,100	-40	180	Not Rated	6002	6455K139	00000	———	0


				15 mm	35 mm	11 mm	65	1,000	-40	180	Not Rated	6202	6455K47	00000	6455K159	00000
				17 mm	35 mm	8 mm	65	1,000	-40	180	Not Rated	16003	6455K183	00000	———	0
				17 mm	35 mm	10 mm	65	1,000	-40	180	Not Rated	6003	6455K141	00000	———	0
				17 mm	40 mm	12 mm	65	1,000	-40	180	Not Rated	6203	6455K48	00000	———	0
20 mm				42 mm	8 mm	75	800	-40	180	Not Rated	16004	———	0	6455K194	00000
20 mm	42 mm			12 mm	75	800	-40	180	Not Rated	6004	6455K142	00000	6455K151	00000
20 mm	47 mm			14 mm	75	800	-40	180	Not Rated	6204	6455K49	00000	———	0
20 mm	52 mm			15 mm	90	700	-40	180	Not Rated	6304	———	0	6455K176	00000
25 mm	47 mm			12 mm	75	800	-40	180	Not Rated	6005	———	0	6455K152	00000
25 mm	52 mm	15 mm		90	700	-40	180	Not Rated	6205	6455K155	00000	———	0
25 mm	62 mm	17 mm	90	700	-40	180	Not Rated	6305	6455K171	00000	———	0
30 mm	55 mm	9 mm	90	700	-40	180	Not Rated	16006	6455K186	00000	———	0
30 mm	55 mm	13 mm	90	700	-40	180	Not Rated	6006	6455K144	00000	———	0
35 mm	62 mm	9 mm	110	600	-40	180	Not Rated	16007	———	0	6455K197	00000



		Chemical-Resistant PVDF

		1/8"	1/2"	5/32"	15	3,100	-40	180	Not Rated	R2A	7003K23	00000	———	0


		3/16"	1/2"	5/32"	15	3,100	-40	180	Not Rated	R3	7003K91	00000	———	0
		1/4"	5/8"	0.196"	25	2,300	-40	180	Not Rated	R4	7003K92	00000	———	0
		1/4"	3/4"	9/32"	25	2,300	-40	180	Not Rated	R4A	7003K93	00000	———	0
		3/8"	7/8"	7/32"	40	1,600	-40	180	Not Rated	R6	7003K94	00000	———	0
		3/8"	7/8"	9/32"	40	1,600	-40	180	Not Rated	R6A	7003K95	00000	———	0
		3/8"	1 1/8"	3/8"	55	1,100	-40	180	Not Rated	R8A	7003K96	00000	———	0
		1/2"	1 1/8"	3/8"	55	1,100	-40	180	Not Rated	R8A	7003K97	00000	———	0
		1/2"	1 3/8"	7/16"	65	1,000	-40	180	Not Rated	R10B	7003K98	00000	———	0
		3/4"	1 5/8"	5/16"	75	800	-40	180	Not Rated	R12	7003K83	00000	———	0
		1"	2"	1/2"	90	700	-40	180	Not Rated	R16	7003K84	000000	———	0




				High-Temperature Chemical-Resistant PEEK

				1/8"	1/2"	5/32"	15	3,100	-40	330	Not Rated	R2A	1258N25	00000	———	0


				3/16"	1/2"	5/32"	20	3,800	-40	330	Not Rated	R3	1258N11	00000	———	0
				1/4"	5/8"	0.196"	30	2,800	-40	330	Not Rated	R4	1258N12	00000	———	0
				1/4"	3/4"	7/32"	30	2,800	-40	330	Not Rated	R4A	1258N13	00000	———	0
				1/4"	3/4"	9/32"	30	2,800	-40	330	Not Rated	R4A	1258N14	00000	———	0
				3/8"	7/8"	7/32"	50	1,900	-40	330	Not Rated	R6	1258N15	00000	———	0
				3/8"	7/8"	9/32"	50	1,900	-40	330	Not Rated	R6A	1258N16	00000	———	0
				1/2"	1 1/8"	1/4"	65	1,300	-40	330	Not Rated	R8	1258N17	00000	———	0
				1/2"	1 1/8"	3/8"	65	1,300	-40	330	Not Rated	R8A	1258N19	00000	———	0
				1/2"	1 3/8"	7/16"	80	1,200	-40	330	Not Rated	R10B	1258N21	00000	———	0
				5/8"	1 3/8"	7/16"	80	1,200	-40	330	Not Rated	R10B	1258N22	00000	———	0


				3/4"	1 5/8"	7/16"	90	1,000	-40	330	Not Rated	R12	1258N23	000000	———	0
				1"	2"	1/2"	110	800	-40	330	Not Rated	R16	1258N24	000000	———	0

Ball Bearings with Retaining Ring

No need for complicated tools—install these bearings by hand inside a housing. The ring stops the bearing from being jostled out of place when it experiences sudden forces parallel to the shaft (thrust loads).

Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

				Retaining Ring					Temp. Range, ° F
	For Shaft Dia.	For Housing ID	Wd.	OD	Thk.	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Shielded







				Steel

				10 mm	30 mm	9 mm	34.7 mm	1.12 mm	1	1,200	28,000	-20	230	Standard	6200-2Z	6661K31	000000


				12 mm	32 mm	10 mm	36.7 mm	1.12 mm	1	1,600	26,000	-20	230	Standard	6201-2Z	6661K32	00000
				15 mm	32 mm	9 mm	36.7 mm	1.12 mm	1	1,250	26,000	-20	230	Standard	6002-2Z	6661K33	00000
				15 mm	35 mm	11 mm	39.7 mm	1.12 mm	1	1,800	22,000	-20	230	Standard	6202-2Z	6661K34	00000
				17 mm	40 mm	12 mm	44.6 mm	1.12 mm	1	2,200	19,000	-20	230	Standard	6203-2Z	6661K35	00000
				20 mm	47 mm	14 mm	52.7 mm	1.12 mm	1	3,000	17,000	-20	230	Standard	6204-2Z	6661K36	00000
				20 mm	52 mm	15 mm	57.9 mm	1.12 mm	1	3,750	15,000	-20	230	Standard	6304-2Z	6661K37	00000
				25 mm	52 mm	15 mm	57.8 mm	1.12 mm	1	3,300	14,000	-20	230	Standard	6205-2Z	6661K38	00000
				25 mm	62 mm	17 mm	67.7 mm	1.7 mm	1	5,250	13,000	-20	230	Standard	6305-2Z	6661K39	00000
				30 mm	62 mm	16 mm	67.7 mm	1.7 mm	1	4,550	12,000	-20	230	Standard	6206-2Z	6661K77	00000
				30 mm	72 mm	19 mm	78.6 mm	1.7 mm	1	6,650	11,000	-20	230	Standard	6306-2Z	6661K78	00000


				Sealed







								Steel

								1/2"	1 3/4"	5/8"	1.922"	0.042"	Not Rated	2,550	5,000	-20	250	Extended	7508-2RS	2782T81	00000


								5/8"	1 3/4"	5/8"	1.922"	0.042"	Not Rated	2,550	5,000	-20	250	Extended	7510-2RS	2782T83	00000
								3/4"	1 3/4"	5/8"	1.922"	0.042"	Not Rated	2,550	5,000	-20	250	Extended	7512-2RS	2782T85	00000
								1"	2"	5/8"	2.156"	0.042"	Not Rated	2,950	5,000	-20	250	Extended	7516-2RS	2782T87	00000
								1 1/4"	2 9/16"	3/4"	2.766"	0.065"	Not Rated	5,350	5,000	-20	250	Extended	7520-2RS	2782T89	00000
								10 mm	30 mm	9 mm	34.7 mm	1.12 mm	1	1,200	17,000	-40	210	Standard	6200-2RS	6661K21	00000
								12 mm	32 mm	10 mm	36.7 mm	1.12 mm	1	1,600	15,000	-40	210	Standard	6201-2RS	6661K22	00000
								15 mm	32 mm	9 mm	36.7 mm	1.12 mm	1	1,250	14,000	-40	210	Standard	6002-2RS	6661K23	00000
								15 mm	35 mm	11 mm	39.7 mm	1.12 mm	1	1,800	13,000	-40	210	Standard	6202-2RS	6661K24	00000
								17 mm	35 mm	10 mm	39.7 mm	1.12 mm	1	1,400	13,000	-40	210	Standard	6003-2RS	6661K54	00000
								17 mm	40 mm	12 mm	44.6 mm	1.12 mm	1	2,200	12,000	-40	210	Standard	6203-2RS	6661K25	00000


								17 mm	47 mm	14 mm	52.7 mm	1.12 mm	1	3,200	11,000	-40	210	Standard	6303-2RS	6661K55	00000
								20 mm	47 mm	14 mm	52.7 mm	1.12 mm	1	3,000	10,000	-40	210	Standard	6204-2RS	6661K26	00000
								20 mm	52 mm	15 mm	57.9 mm	1.12 mm	1	3,750	9,500	-40	210	Standard	6304-2RS	6661K27	00000
								25 mm	52 mm	15 mm	57.9 mm	1.12 mm	1	3,300	8,500	-40	210	Standard	6205-2RS	6661K28	00000
								25 mm	62 mm	17 mm	67.7 mm	1.7 mm	1	5,250	7,500	-40	210	Standard	6305-2RS	6661K29	00000
								30 mm	55 mm	13 mm	60.7 mm	1.12 mm	1	3,100	8,000	-40	210	Standard	6006-2RS	6661K56	00000
								30 mm	62 mm	16 mm	67.7 mm	1.7 mm	1	4,550	7,500	-40	210	Standard	6206-2RS	6661K57	00000
								30 mm	72 mm	19 mm	78.6 mm	1.7 mm	1	6,650	6,300	-40	210	Standard	6306-2RS	6661K58	00000

Electrically Insulating Ball Bearings

Protect bearings from stray currents. The ceramic balls insulate bearings from electrical charges in electric motors and power generators that can damage the inner ring over time. The balls also generate less heat than metal ones, so you don’t have to lubricate them as often to keep bearings running smoothly.

Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

							Temp. Range, ° F			Ceramic Balls
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Bearing Trade No.		Each
Shielded







				Steel

				17	40	12	1	2,100	25,500	-20	250	6203-2Z	1389N31	0000000


				20	47	14	1	2,850	22,500	-20	250	6204-2Z	1389N32	000000
				25	52	15	1	3,100	19,500	-20	250	6205-2Z	1389N33	000000
				30	62	16	1	4,350	16,500	-20	250	6206-2Z	1389N34	000000
				30	72	19	1	7,800	14,000	-20	245	6306-2Z	1389N55	000000
				35	72	17	1	5,750	13,500	-20	250	6207-2Z	1389N35	000000
				35	80	21	1	9,100	12,600	-20	245	6307-2Z	1389N56	000000
				40	80	18	1	6,500	12,000	-20	250	6208-2Z	1389N36	000000
				40	90	23	1	11,400	11,000	-20	245	6308-2Z	1389N57	000000
				45	85	19	1	8,400	11,800	-20	245	6209-2Z	1389N41	000000
				45	100	25	1	14,800	9,700	-20	245	6309-2Z	1389N58	000000


				50	90	20	1	9,600	10,800	-20	245	6210-2Z	1389N42	000000
				55	100	21	1	11,400	9,600	-20	245	6211-2Z	1389N43	000000


				Sealed







								Steel

								10	26	8	1	1,050	32,000	-40	210	6000-2RS	1389N11	000000


								12	28	8	1	1,200	30,000	-40	210	6001-2RS	1389N12	000000
								15	32	9	1	1,300	24,000	-40	210	6002-2RS	1389N13	000000
								15	35	11	1	1,800	22,000	-40	210	6202-2RS	1389N18	000000
								17	35	10	1	1,400	22,000	-40	210	6003-2RS	1389N14	000000
								17	40	12	1	2,200	20,000	-40	210	6203-2RS	1389N19	000000
								20	42	12	1	2,200	19,000	-40	210	6004-2RS	1389N15	000000
								20	47	14	1	3,000	17,000	-40	210	6204-2RS	1389N21	000000
								25	52	15	1	3,300	15,000	-40	210	6205-2RS	1389N22	000000
								30	55	13	1	3,100	16,000	-40	210	6006-2RZ	1389N16	000000
								30	62	16	1	4,550	15,000	-40	210	6206-2RZ	1389N23	000000


								35	72	17	1	6,050	13,000	-40	210	6207-2RZ	1389N24	000000
								40	68	15	1	4,000	12,000	-40	210	6008-2RZ	1389N17	000000
								40	80	18	1	7,300	11,000	-40	210	6208-2RZ	1389N25	000000

Four-Point Angular Contact Ball Bearings

Support complex movement in multiple directions with a single compact bearing. The balls distribute weight at four points, so these bearings handle radial, thrust, and moment loads all at once. For example, you’ll often find them in robot arms, which rotate, extend, and twist while supporting an object’s weight. Thinner than two standard angular contact ball bearings paired together, these bearings squeeze into tight spaces. They’re commonly paired with large hollow shafts to run electrical wire and other lines.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

					Dynamic Load Cap.					Temp. Range, ° F
	For Shaft Dia.	For Housing ID	Wd.	ABEC Rating	Radial, lb.	Thrust, lb.	Moment, ft·lbf	Max. Rotation Speed, rpm	Contact Angle	Min.	Max.	Inner Ring Type		Each
Open







				Steel

				2"	2 1/2"	1/4"	1F	510	790	35	1,500	30°	-60	250	Standard	6656K11	0000000


				2"	2 5/8"	5/16"	1F	750	1,100	50	1,500	30°	-60	250	Standard	6656K19	000000
				2 1/2"	3"	1/4"	1F	580	910	50	1,200	30°	-60	250	Standard	6656K12	000000
				2 1/2"	3 1/8"	5/16"	1F	840	1,250	70	1,200	30°	-60	250	Standard	6656K21	000000
				3"	3 1/2"	1/4"	1F	640	1,000	65	800	30°	-60	250	Standard	6656K13	000000
				3"	3 5/8"	5/16"	1F	930	1,400	95	1,000	30°	-60	250	Standard	6656K22	000000
				3 1/2"	4"	1/4"	1F	700	1,100	80	700	30°	-60	250	Standard	6656K14	000000
				3 1/2"	4 1/8"	5/16"	1F	1,000	1,550	120	700	30°	-60	250	Standard	6656K23	000000
				4"	4 1/2"	1/4"	1F	750	1,200	100	600	30°	-60	250	Standard	6656K15	000000
				4"	4 5/8"	5/16"	1F	1,050	1,700	140	600	30°	-60	250	Standard	6656K24	000000
				5"	5 1/2"	1/4"	1F	850	1,400	130	500	30°	-60	250	Standard	6656K16	000000


				5"	5 5/8"	5/16"	1F	1,200	1,950	200	500	30°	-60	250	Standard	6656K25	00000000
				6"	6 1/2"	1/4"	1F	950	1,550	180	300	30°	-60	250	Standard	6656K17	00000000
				6"	6 5/8"	5/16"	1F	1,350	2,200	260	400	30°	-60	250	Standard	6656K26	00000000
				7"	7 1/2"	1/4"	1F	1,000	1,700	230	200	30°	-60	250	Standard	6656K18	00000000

High-Precision Angular Contact Ball Bearings

Open

Sealed

Our most precise bearings for tackling radial and thrust loads at once, with tolerances tighter than a speck of dust. Rated ABEC 7 out of 9, they meet strict tolerance standards established by the Annular Bearing Engineers Committee (ABEC). Choose them for equipment that requires both high speed and pinpoint accuracy, such as machine tool spindles. For example, a bearing on a spindle withstands a radial load as it spins at high speeds and a thrust load when the cutting tool touches the workpiece. These bearings don’t handle as much force from radial loads as standard ones, but you can pair them with a cylindrical roller bearing to increase their load capacity.

Single Row—Single-row bearings withstand thrust loads from one direction.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

										Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Material	Dynamic Combined Load Cap., lbf	Max. Rotation Speed, rpm	Lubrication	Contact Angle	Min.	Max.	Bearing Trade No.		Each
Single Row







				Open

				10	30	9	7	Steel	1,250	57,500	Required	15°	-40	245	7200	4487N19	0000000


				12	28	8	7	Steel	1,000	67,000	Required	15°	-30	140	7001	2385K41	000000
				12	32	10	7	Steel	1,850	52,300	Required	15°	-40	245	7201	4487N21	000000
				15	32	9	7	Steel	1,150	56,000	Required	15°	-30	140	7002	2385K42	000000
				15	35	11	7	Steel	2,000	46,000	Required	15°	-40	245	7202	4487N22	000000
				17	35	10	7	Steel	1,500	50,000	Required	15°	-30	140	7003	2385K43	000000
				17	40	12	7	Steel	2,550	40,400	Required	15°	-40	245	7203	4487N23	000000
				20	42	12	7	Steel	1,950	43,000	Required	15°	-30	140	7004	2385K44	000000
				20	47	14	7	Steel	3,400	34,400	Required	15°	-40	245	7204	4487N24	000000
				25	47	12	7	Steel	2,150	36,000	Required	15°	-30	140	7005	2385K45	000000
				25	52	15	7	Steel	3,900	29,900	Required	15°	-40	245	7205	4487N25	000000


				30	55	13	7	Steel	3,200	32,000	Required	15°	-30	140	7006	2385K46	000000
				30	62	16	7	Steel	5,400	25,000	Required	15°	-40	245	7206	4487N26	000000
				35	62	14	7	Steel	3,500	24,000	Required	15°	-30	140	7007	2385K47	000000
				35	72	17	7	Steel	7,150	21,500	Required	15°	-40	245	7207	4487N27	000000
				40	68	15	7	Steel	3,750	20,000	Required	15°	-30	140	7008	2385K48	000000
				40	80	18	7	Steel	8,500	19,200	Required	15°	-40	245	7208	4487N28	000000
				45	75	16	7	Steel	6,400	19,000	Required	15°	-30	140	7009	2385K49	000000
				45	85	19	7	Steel	9,650	17,700	Required	15°	-40	245	7209	4487N29	000000
				50	80	16	7	Steel	6,650	17,000	Required	15°	-30	140	7010	2385K51	000000
				50	90	20	7	Steel	10,100	16,500	Required	15°	-40	245	7210	4487N31	000000




						Sealed

						30	55	13	7	Steel	3,550	27,100	Lubricated	15°	0	230	7006	4487N11	000000


						35	62	14	7	Steel	4,500	23,800	Lubricated	15°	0	230	7007	4487N12	000000
						40	68	15	7	Steel	4,850	21,300	Lubricated	15°	0	230	7008	4487N13	000000
						45	75	16	7	Steel	5,750	19,200	Lubricated	15°	0	230	7009	4487N14	000000
						50	80	16	7	Steel	6,100	17,700	Lubricated	15°	0	230	7010	4487N15	000000
						55	90	18	7	Steel	8,050	15,900	Lubricated	15°	0	230	7011	4487N16	00000000
						60	95	18	7	Steel	8,300	14,900	Lubricated	15°	0	230	7012	4487N17	00000000
						65	100	18	7	Steel	8,750	14,000	Lubricated	15°	0	230	7013	4487N18	00000000

High-Load Dry-Running Ball Bearings

Double the balls for double the load capacity—these bearings carry twice as much weight as standard dry-running ball bearings. Made of naturally slippery plastic, there's no lubricant to maintain. No lubricant means no oil that could drip off, wash out, or collect dust, so they're ideal for spic-and-span spaces. They stand up to thorough cleanings since they won't rust or warp from moisture.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, reducing wear and extending the life of the bearing.

Acetal—The most common choice for plastic bearings, acetal is economical yet still stands up to daily wear and tear.

316 Stainless Steel Balls—Won't corrode from salt water or harsh chemicals, such as bleach and chlorine found in cleaning solutions.

Glass Balls—Nonmagnetic, so they won't interfere with sensors and other sensitive electronics.

						Temp. Range, ° F				316 Stainless Steel Balls		Glass Balls
	For Shaft Dia.	For Housing ID	Wd.	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	ABEC Rating	Bearing Trade No.		Each		Each
Open







				Acetal

				1/4"	5/8"	3/8"	50	1,800	-40	180	Not Rated	R4	5951N111	000000	———	0


				1/4"	3/4"	3/8"	50	1,800	-40	180	Not Rated	R4A	5951N112	00000	5951N126	000000
				3/8"	7/8"	7/16"	60	1,200	-40	180	Not Rated	R6	5951N113	00000	———	0
				3/8"	1 3/8"	7/16"	65	1,000	-40	180	Not Rated	R10B	5951N116	00000	———	0
				1/2"	1 1/8"	7/16"	75	900	-40	180	Not Rated	R8	5951N114	00000	5951N128	00000
				1/2"	1 3/8"	7/16"	85	800	-40	180	Not Rated	R10B	———	0	5951N132	00000
				5/8"	1 1/8"	7/16"	65	1,000	-40	180	Not Rated	—	———	0	5951N129	00000
				5/8"	1 3/8"	7/16"	85	800	-40	180	Not Rated	R10B	5951N118	00000	———	0
				3/4"	1 5/8"	5/8"	100	600	-40	180	Not Rated	R12	5951N119	00000	———	0
				1"	2"	3/4"	125	500	-40	180	Not Rated	R16	5951N121	00000	5951N135	00000
				1 1/4"	2"	3/4"	125	500	-40	180	Not Rated	—	5951N122	00000	———	0


				1 1/4"	2 1/4"	3/4"	125	500	-40	180	Not Rated	R20	5951N124	00000	———	0
				10 mm	30 mm	14 mm	75	900	-40	180	Not Rated	A5200-6	5951N139	00000	———	0
				12 mm	32 mm	16 mm	75	900	-40	180	Not Rated	A5201-6	5951N141	00000	———	0
				15 mm	35 mm	16 mm	85	800	-40	180	Not Rated	A5202-6	5951N142	00000	———	0
				17 mm	40 mm	17 mm	85	800	-40	180	Not Rated	A5203-6	5951N143	00000	———	0
				20 mm	47 mm	21 mm	100	600	-40	180	Not Rated	A5204-6	5951N144	00000	———	0
				25 mm	52 mm	21 mm	125	500	-40	180	Not Rated	A5205-6	5951N145	00000	———	0
				30 mm	62 mm	23 mm	150	500	-40	180	Not Rated	A5206-6	5951N146	00000	———	0

Insert Bearings

Install by hand into a housing (sold

separately)

Image of Product. Front orientation. Ball Bearings. Insert Bearings.

Swap out worn inserts instead of replacing the entire mounted unit. To choose an insert, match the manufacturer model number on your existing bearing.

Set-Screw Shaft Mount—Tighten the screws against the shaft to hold the bearing in place, regardless of the direction the shaft spins.

Eccentric-Lock Shaft Mount—Twist the collar one way to tighten these bearings and the other way to loosen. They're a good choice when you need to take your setup apart frequently. However, they only turn one way, so they won't work with shafts that reverse.

					Temp. Range, ° F
	For Shaft Dia.	For Mounted Bearing Model No.	Bearing Material	ABEC Rating	Min.	Max.		Each
For SKF Mounted Bearings







				Set-Screw Shaft Mount

				1/2"	F2B 008-RM, FYT 1/2 RM	Steel	—	-20	210	5967K11	000000


				3/4"	F2B 012-RM, F4B 012-RM, FYT 3/4 RM	Steel	—	-20	210	5967K13	00000
				1"	F2B 100-RM, F4B 100-RM, FYT 1. RM	Steel	—	-20	210	5967K15	00000
				1 1/8"	F2B 102 TF, F4B 102-TF, FY 1.1/8 TF, FYT 1.1/8 TF	Steel	—	-20	210	5967K72	00000
				1 3/16"	F2B 103-RM, F4B 103-RM, FYT 1.3/16 RM	Steel	—	-20	210	5967K16	00000
				1 1/4"	F2B 104-RM, F4B 104-RM, FYT 1.1/4 RM	Steel	—	-20	210	5967K18	00000
				1 1/4"	F2B 104S-RM, F4B 104S-RM	Steel	—	-20	210	5967K17	00000
				1 3/8"	F4B 106-TF, FY 1.3/8 TF, FYT 1.3/8 TF	Steel	—	-20	210	5967K73	00000
				1 7/16"	F2B 107-RM, F4B 107-RM, FYT 1.7/16 RM	Steel	—	-20	210	5967K19	00000
				1 1/2"	F2B 108-TF, F4B 108-TF, FYT 1.1/2 RM	Steel	—	-20	210	5967K21	000000
				1 3/4"	F2B 112-RM, F4B 112-RM, FYT 1.3/4 RM	Steel	—	-20	210	5967K22	000000


				1 15/16"	F2B 115-TF, F4B 115-TF, FYT 1.15/16 RM	Steel	—	-20	210	5967K23	000000
				2"	F2B 200-RM, F4B 200-RM, FYT 2. RM	Steel	—	-20	210	5967K24	000000
				2 1/4"	F4B 204-TF, FY 2.1/4 TF, FYT 2.1/4 TF	Steel	—	-20	210	5967K74	000000
				2 1/2"	F4B 208-TF, FY 2.1/2 TF, FYT 2.1/2 TF	Steel	—	-20	210	5967K75	000000




						Eccentric-Lock Shaft Mount

						5/8"	P2BL 010-FM, SYH 5/8 FM	Steel	—	-20	210	6361K212	00000


						3/4"	P2BL 012-FM, SYH 3/4 FM	Steel	—	-20	210	6361K213	00000
						7/8"	P2BL 014-FM, SYH 7/8 FM	Steel	—	-20	210	6361K214	00000
						1"	P2BL 100-FM, SYH 1. FM	Steel	—	-20	210	6361K216	00000
						1 1/4"	P2BL 104-FM, SYH 1.1/4 FM	Steel	—	-20	210	6361K221	00000
						1 1/4"	SYH 1.1/4 AFM	Steel	—	-20	210	6361K219	00000
						1 3/8"	P2BL 106-FM, SYH 1.3/8 FM	Steel	—	-20	210	6361K222	00000
						1 7/16"	P2BL 107-FM, SYH 1.7/16 FM	Steel	—	-20	210	6361K223	00000
						1 1/2"	P2BL 108-WF, SYH 1.1/2 WF	Steel	—	-20	210	6361K224	00000
						1 15/16"	P2BL 115-WF, SYH 1.15/16 WF	Steel	—	-20	210	6361K227	000000
						2"	P2BL 200-FM, SYH 2. FM	Steel	—	-20	210	6361K231	000000


						2 3/16"	SYH 2.3/16 FM	Steel	—	-20	210	6361K228	000000


						For Sealmaster Mounted Bearings







										Set-Screw Shaft Mount

										5/8"	FB-10, NP-10, NPL-10, SC-10, SF-10, SFT-10, ST-10, TB-10	Steel	1	-20	220	7728T112	00000


3/4"	FB-12, NP-12, NPL-12, SC-12, SF-12, SFT-12, ST-12, TB-12									Steel	1	-20	220	7728T113	00000
7/8"	FB-14, NP-14, NPG-14-6, NPG-14-9, NPL-14, SC-14, SF-14, SFT-14, SP-14, ST-14, STH-14-6, STH-14-9, TB-14									Steel	1	-20	220	7728T114	000000
1"	FB-16, NP-16, NPG-16-6, NPG-16-9, NPL-16, SC-16, SF-16, SFT-16, SP-16, ST-16, STH-16-6, STH-16-9, TB-16									Steel	1	-20	220	7728T116	000000
1"	FB-16-HT, NP-16-HT, NPG-16-6-HT, NPG-16-9-HT, NPL-16-HT, SC-16-HT, SF-16-HT, SFT-16-HT, SP-16-HT, ST-16-HT, STH-16-6-HT, STH-16-9-HT, TB-16-HT									Steel	1	-20	400	6667K304	000000
1 1/8"	FB-18, NP-18, NPG-18-6, NPG-18-9, NPL-18, SC-18, SCHB-18, SEHB-18, SF-18, SFC-18, SFT-18, SP-18, ST-18, STH-18-6, STH-18-9, TB-18	Steel								1	-20	220	7728T117	000000
1 3/16"	FB-19, NP-19, NPG-19-6, NPG-19-9, NPL-19, SC-19, SF-19, SFC-19, SFT-19, SP-19, ST-19, STH-19-6, STH-19-9, TB-19	Steel	1							-20	220	7728T118	000000
1 1/4"	FB-20, NP-20, NPG-20-12, NPG-20-9, NPL-20, SC-20, SCHB-20, SEHB-20, SF-20, SFC-20, SFT-20, SP-20, ST-20, STH-20-12, STH-20-9, TB-20	Steel	1							-20	220	7728T119	000000
1 1/4"	FB-20-HT, NP-20-HT, NPG-20-12-HT, NPG-20-9-HT, NPL-20-HT, SC-20-HT, SCHB-20-HT, SEHB-20-HT, SF-20-HT, SFC-20-HT, SFT-20-HT, SP-20-HT, ST-20-HT, STH-20-12-HT, STH-20-9-HT, TB-20-HT	Steel	1							-20	400	6667K305	000000
1 1/4"	FB-20R, NP-20R, NPL-20R, SC-20R, SF-20R, SFC-20R, SFT-20R, SP-20R, ST-20R, TB-20R	Steel	1							-20	220	7728T121	000000
1 3/8"	FB-22, NP-22, NPG-22-12, NPG-22-9, NPL-22, SC-22, SCHB-22, SEHB-22, SF-22, SFC-22, SFT-22, SP-22, ST-22, STH-22-12, STH-22-9, TB-22	Steel	1							-20	220	7728T122	000000


1 7/16"	FB-23, NP-23, NPG-23-12, NPG-23-9, NPL-23, SC-23, SF-23, SFC-23, SFT-24, SP-23, ST-23, STH-23-12, STH-23-9, TB-23	Steel	1							-20	220	7728T123	000000
1 1/2"	NP-24, NPG-24-12, NPG-24-18, NPL-24, SC-24, SCHB-24, SEHB-24, SF-24, SFC-24, SFT-24, SP-24, ST-24, STH-24-12, STH-24-18, TB-24	Steel	1							-20	220	7728T124	000000
1 11/16"	NP-27, NPG-27-12, NPG-27-18, NPL-27, SC-27, SF-27, SFC-27, SFT-27, SP-27, ST-27, STH-27-12, STH-27-18, TB-27	Steel	1							-20	220	7728T125	000000
1 3/4"	NP-28, NPL-28, SC-28, SFC-28, SFT-28, SP-28, ST-28, TB-28	Steel	1							-20	220	7728T151	000000
1 15/16"	FB-31, NP-31, NPG-31-12, NPG-31-18, NPL-32, SC-31, SCHB-31, SEHB-31, SF-31, SFC-31, SFT-31, SP-31, ST-31, STH-31-12, STH-31-18, TB-31	Steel	1							-20	220	7728T126	000000
2"	NP-32, NPG-32-12, NPG-32-18, NPL-32, SC-32, SF-32, SFC-32, SFT-32, SP-32, ST-32, STH-32-12, STH-32-18	Steel	1							-20	220	7728T128	000000
2 3/16"	NP-35, NPG-35-12, NPG-35-18, NPL-35, SC-35, SF-35, SFC-35, SFT-35, SP-35, ST-35, STH-35-12, STH-35-18	Steel	1							-20	220	7728T129	000000
2 7/16"	NP-39, NPG-39-12, NPG-39-18, NPL-39, SC-39, SCHB-39, SEHB-39, SF-39, SFC-39, SP-39, ST-39, STH-39-12, STH-39-18	Steel	1							-20	220	7728T131	000000
20 mm	FB-204, NP-204, NPL-204, SC-204, SF-204, SFT-204, ST-204, TB-204	Steel	1							-20	220	7835T111	000000
25 mm	FB-205, NP-205, NPG-205-6, NPG-205-9, NPL-205, SC-205, SF-205, SFT-205, SP-205, ST-205, STH-205-6, STH-205-9, TB-205	Steel	1							-20	220	7835T112	000000


30 mm	FB-206, NP-206, NPG-206-6, NPG-206-9, NPL-206, SC-206, SCHB-206, SEHB-206, SF-206, SFC-206, SFT-206, SP-206, ST-206, STH-206-6, STH-206-9, TB-206	Steel	1							-20	220	7835T113	000000
35 mm	FB-207, NP-207, NPG-207-12, NPG-207-9, NPL-207, SC-207, SCHB-207, SEHB-207, SF-207, SFC-207, SFT-207, SP-207, ST-207, STH-207-12, STH-207-9, TB-207	Steel	1							-20	220	7835T114	000000
40 mm	NP-208, NPG-28-18, NPG-208-12, NPL-208, SC-208, SCHB-208, SEHB-208, SF-208, SFC-208, SFT-208, SP-208, ST-208, STH-208-12, STH-208-18, TB-208	Steel	1							-20	220	7835T115	000000
50 mm	FB-210, NP-210, NPG-210-12, NPG-210-18, NPL-210, SC-210, SCHB-210, SEHB-210, SF-210, SFC-210, SFT-210, SP-210, ST-210, STH-210-12, STH-210-18, TB-210	Steel	1							-20	220	7835T117	000000


For Timken Mounted Bearings







				Set-Screw Shaft Mount

				1/2"	SAK 1/2, SAS 1/2, SCJ 1/2, SCJT 1/2					Steel	1	-65	250	4768K19	00000


				5/8"	SAK 5/8, SAS 5/8, SCJ 5/8, SCJT 5/8					Steel	1	-65	250	4768K21	00000
				3/4"	SAK 3/4, SAS 3/4, SCJ 3/4, SCJT 3/4, STB 3/4					Steel	1	-65	250	4768K22	00000
				1"	SAK 1, SAS 1, SCJ 1, SCJT 1, STB 1					Steel	1	-65	250	4768K26	00000
				1 3/16"	SAK 1 3/16, SAS 1 3/16, SCJ 1 3/16, SCJT 1 3/16, STB 1 3/16					Steel	1	-65	250	4768K29	00000
				1 1/4"	SAK 1 1/4, SAS 1 1/4, SCJ 1 1/4, SCJT 1 1/4, STB 1 1/4					Steel	1	-65	250	4768K33	00000
				1 1/4"	SAK 1 1/4 S, SAS 1 1/4 S, SCJ 1 1/4 S, STB 1 1/4 S					Steel	1	-65	250	4768K31	00000
				1 7/16"	SAK 1 7/16, SAS 1 7/16, SCJ 1 7/16, SCJT 1 7/16, STB 1 7/16					Steel	1	-65	250	4768K35	00000
				1 1/2"	SAK 1 1/2, SAS 1 1/2, SAS 1 1/2 H, SCJ 1 1/2, SCJT 1 1/2, STB 1 1/2					Steel	1	-65	250	4768K37	000000
				1 5/8"	SAK 1 5/8, SAS 1 5/8, SCJ 1 5/8, SCJT 1 5/8, STB 1 5/8					Steel	1	-65	250	4768K39	000000
				1 11/16"	SAK 1 11/16, SAS 1 11/16, SCJ 1 11/16, SCJT 1 11/16, STB 1 11/16					Steel	1	-65	250	4768K41	000000


				1 3/4"	SAK 1 3/4, SAS 1 3/4, SCJ 1 3/4, SCJT 1 3/4, STB 1 3/4	Steel	1			-65	250	4768K42	000000
				2"	SAK 2 S, SAS 2 S, SCJ 2 S, SCJT 2 S	Steel	1			-65	250	4768K44	000000
				25 mm	SAK 25, SAS 25, SCJ 25, SCJT 25, STB 25	Steel	1			-65	250	4768K27	00000
				30 mm	SAK 30, SAS 30, SCJ 30, SCJT 30, STB 30	Steel	1			-65	250	4768K32	00000
				35 mm	SAK 35, SAS 35, SCJ 35, SCJT 35, STB 35	Steel	1	-65	250	4768K36	00000

One-Way-Locking Ball Bearings

Prevent shafts from reversing direction. These bearings have internal components (sprags) that lock against the outer ring to transmit torque one way but spin freely in the other. They're often found in backstopping, indexing, and overrunning applications. For example, they're used to prevent conveyors from reversing.

Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

								Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Max. Torque, ft·lbf	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Shielded







				Steel

				8	22	9	1	720	15,000	1.5	-40	170	Standard	608-2Z	4752N11	0000000


				12	32	10	1	1,150	10,000	6.5	-40	170	Standard	FZ 6201	4752N22	000000
				15	35	11	1	1,160	9,400	15	-40	170	Standard	FZ 6202	4752N32	000000
				17	40	12	1	1,270	8,200	23	-40	170	Standard	FZ 6203	4752N42	000000
				20	47	14	1	1,540	6,800	64	-40	170	Standard	FZ 6204	4752N52	000000
				25	52	15	1	1,620	5,600	70	-40	170	Standard	FZ 6205	4752N62	000000
				30	62	16	1	1,730	4,000	165	-40	170	Standard	FZ 6206	4752N72	000000
				35	72	17	1	1,830	3,600	240	-40	170	Standard	FZ 6207	4752N82	000000
				40	80	22	1	2,010	3,000	305	-40	170	Standard	FZ 6208	4752N92	000000


				Sealed







								Steel

								12	32	14	1	1,150	10,000	6.5	-40	170	Standard	FZ 6201 2RS	4752N23	000000


								15	35	16	1	1,160	8,400	15	-40	170	Standard	FZ 6202 2RS	4752N24	000000
								17	40	17	1	1,270	7,300	23	-40	170	Standard	FZ 6203 2RS	4752N25	000000
								20	47	19	1	1,540	6,000	64	-40	170	Standard	FZ 6204 2RS	4752N26	000000
								25	52	20	1	1,620	5,200	70	-40	170	Standard	FZ 6205 2RS	4752N27	000000
								30	62	21	1	1,730	4,200	165	-40	170	Standard	FZ 6206 2RS	4752N28	000000
								35	72	22	1	1,830	3,600	240	-40	170	Standard	FZ 6207 2RS	4752N29	000000
								40	80	27	1	2,010	3,000	305	-40	170	Standard	FZ 6208 2RS	4752N33	000000

Dry-Running Flanged Ball Bearings

Don't risk your bearing popping out of place or making a mess. The flange presses against the housing wall, so vibration and other sudden forces parallel to the shaft (thrust loads) won't knock these bearings off-kilter. Made of naturally slippery plastic, there's no lubricant to maintain. No lubricant means no oil that could drip off, wash out, or collect dust, so they're ideal for spic-and-span spaces. They stand up to thorough cleanings since they won't rust or warp from moisture.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, reducing wear and extending the life of the bearing.

Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.

Acetal—The most common choice for plastic bearings, acetal is economical yet still stands up to daily wear and tear.

316 Stainless Steel Balls—Won't corrode from salt water or harsh chemicals, such as bleach and chlorine found in cleaning solutions.

				Flange				Temp. Range, ° F				316 Stainless Steel Balls
	For Shaft Dia.	For Housing ID	Wd.	OD	Thk.	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	ABEC Rating	Bearing Trade No.		Each
Open







				Acetal

				1/8"	1/2"	5/32"	0.56"	0.04"	15	3,100	-40	180	Not Rated	R2A	1301N9	000000


				3/16"	1/2"	5/32"	0.56"	0.04"	15	3,100	-40	180	Not Rated	R3	1301N11	00000
				1/4"	5/8"	0.196"	0.69"	0.04"	25	2,300	-40	180	Not Rated	R4	1301N1	00000
				3/8"	7/8"	7/32"	0.965"	0.06"	40	1,600	-40	180	Not Rated	R6	1301N2	00000
				3/8"	7/8"	9/32"	0.965"	0.06"	40	1,600	-40	180	Not Rated	R6A	1301N3	00000
				1/2"	1 1/8"	3/8"	1.25"	0.06"	55	1,100	-40	180	Not Rated	R8	1301N4	00000
				1/2"	1 3/8"	7/16"	1.5"	0.06"	65	1,000	-40	180	Not Rated	R10	1301N5	00000
				5/8"	1 3/8"	7/16"	1.5"	0.06"	65	1,000	-40	180	Not Rated	R10	1301N6	00000
				3/4"	1 5/8"	7/16"	1.75"	0.06"	75	800	-40	180	Not Rated	R12	1301N7	00000
				7/8"	1 7/8"	3/8"	2"	0.06"	75	800	-40	180	Not Rated	R14	1301N12	00000
				1"	2"	1/2"	2.125"	0.06"	90	700	-40	180	Not Rated	R16	1301N8	00000


				Shielded







								Acetal

								8 mm	28 mm	7 mm	30 mm	1.5 mm	20	2,200	-40	175	Not Rated	608	1301N212	00000


								10 mm	28 mm	9 mm	30 mm	2 mm	25	1,900	-40	175	Not Rated	6000	1301N213	00000
								10 mm	35 mm	9 mm	38 mm	2 mm	25	1,900	-40	175	Not Rated	6000	1301N215	00000
								12 mm	28 mm	9 mm	30 mm	2 mm	30	1,700	-40	175	Not Rated	6001	1301N214	00000
								12 mm	35 mm	9 mm	38 mm	2 mm	30	1,700	-40	175	Not Rated	6001	1301N216	00000

High-Temperature Graphite-Lubricated Ball Bearings

Keep parts spinning in industrial ovens and other places as hot as 660° F. Greased with graphite lubricant, these bearings stay slippery where oil would burn off or solidify. You can install and forget them since the lubricant lasts forever.

Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

							Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Shielded







				Steel

				12	32	10	1	1,600	400	-70	660	Standard	6201-2Z	1258N27	0000000


				15	35	11	1	1,800	350	-70	660	Standard	6202-2Z	1258N28	000000
				17	40	12	1	2,200	300	-70	660	Standard	6203-2Z	1258N29	000000
				20	47	14	1	3,000	250	-70	660	Standard	6204-2Z	1258N31	000000
				25	52	15	1	3,300	200	-70	660	Standard	6205-2Z	1258N32	000000
				30	62	16	1	4,550	150	-70	660	Standard	6206-2Z	1258N33	000000
				35	72	17	1	6,050	150	-70	660	Standard	6207-2Z	1258N34	000000
				40	80	18	1	7,300	150	-70	660	Standard	6208-2Z	1258N35	000000

Quick-Mount Ball Bearings for Food and Beverage

You don't need any special tools to install these bearings in food production areas. Slip them onto a shaft and secure with the turn of a screw for easy mounting. Greased with NSF-registered H1 lubricant, these bearings are safe to install on food-processing equipment, such as conveyor belts, so long as they don’t directly touch the food. They're IP69K rated, so they'll stand up to the hot water from a pressure washer when cleaning your facility at the end of the day.

Set-Screw Shaft Mount—Tighten the screws against the shaft to hold the bearing in place. For high-speed applications, consider clamp-on shaft mounts, which are less likely to slip.

Corrosion-Resistant Nickel-Plated Steel—These bearings resist mild chemicals, such as the ammonia in cleaning solutions, while maintaining the strength of steel. The nickel coating can wear or chip over time, though. If it does, the steel beneath will rust quickly.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

				Retaining Ring						Temp. Range, ° F
	For Shaft Dia.	For Housing ID	Wd.	OD	Thk.	Bearing Seal Type	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Enclosure Rating	Food Industry Std.		Each
Set-Screw Shaft Mount







				Corrosion-Resistant Nickel-Plated Steel

				1"	2 3/64"	3/4"	2.266"	0.047"	Sealed	1	2,800	2,700	-20	220	IP69K	NSF Registered H1	8486N11	0000000


				1 1/4"	2 7/16"	7/8"	2.656"	0.063"	Sealed	1	4,350	2,000	-20	220	IP69K	NSF Registered H1	8486N14	000000
				1 3/8"	2 55/64"	15/16"	3.078"	0.063"	Sealed	1	5,750	2,000	-20	220	IP69K	NSF Registered H1	8486N16	000000
				1 7/16"	2 27/32"	15/16"	3.078"	0.063"	Sealed	1	5,750	2,000	-20	220	IP69K	NSF Registered H1	8486N17	000000
				1 1/2"	3 5/32"	1 3/32"	3.406"	0.063"	Sealed	1	7,300	1,750	-20	220	IP69K	NSF Registered H1	8486N18	000000
				1 3/4"	3 11/32"	1 3/32"	3.594"	0.063"	Sealed	1	7,900	1,600	-20	220	IP69K	NSF Registered H1	8486N19	000000
				2"	3 15/16"	1 3/16"	4.188"	0.094"	Sealed	1	9,750	1,350	-20	220	IP69K	NSF Registered H1	8486N22	000000
				2 3/16"	3 15/16"	1 3/16"	4.188"	0.094"	Sealed	1	9,750	1,350	-20	220	IP69K	NSF Registered H1	8486N23	00000000


				Clamp-On Shaft Mount







								Corrosion-Resistant Nickel-Plated Steel

								3/4"	1 27/32"	5/8"	2.063"	0.047"	Sealed	1	2,600	3,100	-20	220	IP69K	NSF Registered H1	7177N11	000000


								1"	2 3/64"	3/4"	2.266"	0.047"	Sealed	1	2,800	2,700	-20	220	IP69K	NSF Registered H1	7177N12	000000
								1 3/16"	2 7/16"	7/8"	2.656"	0.063"	Sealed	1	4,350	2,300	-20	220	IP69K	NSF Registered H1	7177N14	000000
								1 1/4"	2 27/32"	15/16"	3.078"	0.063"	Sealed	1	5,750	2,000	-20	220	IP69K	NSF Registered H1	7177N16	000000
								25 mm	52 mm	19.1 mm	57.5 mm	1.2 mm	Sealed	1	2,800	2,700	-20	220	IP69K	NSF Registered H1	7177N26	000000
								35 mm	72 mm	23.8 mm	78.2 mm	1.6 mm	Sealed	1	5,750	2,000	-20	220	IP69K	NSF Registered H1	7177N28	000000
								40 mm	80 mm	27.8 mm	86.5 mm	1.6 mm	Sealed	1	7,300	1,750	-20	220	IP69K	NSF Registered H1	7177N29	000000

High-Precision Flanged Ball Bearings

Our most precise flanged ball bearings, with tolerances tighter than a speck of dust. Rated ABEC 7 out of 9, they meet strict tolerance standards established by the Annular Bearing Engineers Committee (ABEC). Choose them for high-speed equipment that requires pinpoint accuracy, such as gyroscopes. Their flange presses against the housing wall, so vibration and other sudden forces parallel to the shaft (thrust loads) won't knock them off-kilter.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.

				Flange					Temp. Range, ° F
	For Shaft Dia.	For Housing ID	Wd.	OD	Thk.	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Open







				Corrosion-Resistant 440C Stainless Steel

				3/64"	5/32"	1/16"	0.203"	0.01"	7	15	100,000	-10	240	Standard	R0	4259T1	000000


				0.055"	3/16"	5/64"	0.234"	0.02"	7	30	100,000	-10	240	Standard	R1	4259T2	00000
				3/32"	3/16"	1/16"	0.234"	0.02"	7	20	100,000	-10	240	Standard	R133	4259T4	00000
				3/32"	5/16"	7/64"	0.359"	0.02"	7	75	74,000	-10	240	Standard	R1-5	4259T5	00000
				1/8"	1/4"	3/32"	0.296"	0.02"	7	40	84,000	-10	240	Standard	R144	4259T6	00000
				1/8"	5/16"	7/64"	0.359"	0.02"	7	75	74,000	-10	240	Standard	R2-5	4259T7	00000
				1/8"	3/8"	5/32"	0.44"	0.03"	7	90	61,000	-10	240	Standard	R2	4259T8	00000
				5/32"	5/16"	7/64"	0.359"	0.02"	7	55	68,000	-10	240	Standard	R155	4259T9	00000
				3/16"	5/16"	7/64"	0.359"	0.02"	7	40	63,000	-10	240	Standard	R156	4259T11	00000
				3/16"	3/8"	1/8"	0.422"	0.02"	7	100	56,000	-10	240	Standard	R166	4259T12	00000
				3/16"	1/2"	0.196"	0.565"	0.04"	7	230	45,000	-10	240	Standard	R3	4259T13	00000


				1/4"	3/8"	1/8"	0.422"	0.02"	7	45	50,000	-10	240	Standard	R168	4259T14	00000
				1/4"	1/2"	1/8"	0.547"	0.02"	7	160	42,000	-10	240	Standard	R188	4259T15	00000
				1/4"	5/8"	0.196"	0.69"	0.04"	7	250	36,000	-10	240	Standard	R4	4259T16	00000
				5/16"	1/2"	5/32"	0.547"	0.03"	7	120	39,000	-10	240	Standard	R1810	4259T17	00000


				Shielded







								Corrosion-Resistant 440C Stainless Steel

								3/64"	5/32"	3/32"	0.203"	0.03"	7	15	80,000	-60	250	Standard	R0-2Z	4262T21	00000


								0.055"	3/16"	7/64"	0.234"	0.03"	7	25	68,000	-60	250	Standard	R1-2Z	4262T22	00000
								5/64"	1/4"	9/64"	0.296"	0.03"	7	35	48,000	-60	250	Standard	R1-4-2Z	4262T23	00000
								3/32"	3/16"	3/32"	0.234"	0.03"	7	15	34,000	-60	250	Standard	R133-2Z	4262T24	00000
								3/32"	5/16"	9/64"	0.359"	0.03"	7	60	34,000	-60	250	Standard	R1-5-2Z	4262T25	00000
								1/8"	1/4"	7/64"	0.296"	0.03"	7	30	25,000	-60	250	Standard	R144-2Z	4262T26	00000
								1/8"	5/16"	9/64"	0.359"	0.03"	7	60	25,000	-60	250	Standard	R2-5-2Z	4262T27	00000
								1/8"	3/8"	5/32"	0.44"	0.03"	7	65	25,000	-60	250	Standard	R2-2Z	4262T28	00000
								5/32"	5/16"	1/8"	0.359"	0.04"	7	40	20,000	-60	250	Standard	R155-2Z	4262T31	00000
								3/16"	5/16"	1/8"	0.359"	0.04"	7	40	17,000	-60	250	Standard	R156-2Z	4262T32	00000
								3/16"	3/8"	1/8"	0.422"	0.03"	7	75	17,000	-60	250	Standard	R166-2Z	4262T33	00000


								3/16"	1/2"	0.196"	0.565"	0.04"	7	140	17,000	-60	250	Standard	R3-2Z	4262T34	00000
								1/4"	3/8"	1/8"	0.422"	0.04"	7	40	15,000	-60	250	Standard	R168-2Z	4262T35	00000
								1/4"	1/2"	3/16"	0.547"	0.05"	7	85	13,000	-60	250	Standard	R188-2Z	4262T36	00000
								1/4"	5/8"	0.196"	0.69"	0.04"	7	150	13,000	-60	250	Standard	R4-2Z	4262T37	00000
								5/16"	1/2"	5/32"	0.547"	0.03"	7	90	10,000	-60	250	Standard	R1810-2Z	4262T38	00000

Hex-Bore Ball Bearings

No need for set screws—the inside corners of these bearings hold them in place on hex shafts as they rotate. They're a good choice when your setup needs to come apart frequently, since there aren't extra mounting steps.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

							Temp. Range, ° F
	For Shaft Wd.	For Housing ID	Wd.	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Sealed







				Steel

				11/16"	1 27/32"	35/64"	1	2,850	6,000	-40	250	Extended	HPC011GP	1291N1	000000


				7/8"	2 3/64"	19/32"	1	3,150	5,900	-40	250	Extended	HPC014GP	1291N2	00000
				1"	2 7/16"	5/8"	1	4,400	4,800	-40	250	Extended	HPC100GP	1291N3	00000
				1 1/8"	2 53/64"	43/64"	1	5,800	4,000	-40	250	Extended	HPS102GP	1291N4	00000
				1 1/2"	3 11/32"	3/4"	1	7,300	3,500	-40	250	Extended	HPS108GR	1291N5	000000

Tapered-Bore Ball Bearings

Mount these bearings on tapered shafts. Or, pair with an adapter sleeve to install them on round shafts without needing to press fit. The two rows of balls have separate raceways in the inner ring and a shared raceway in the outer ring, so the balls rock back and forth to compensate for misalignment. This construction also reduces noise and vibration.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

	Bearings														Adapter Sleeves
									Temp. Range
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Misalignment Capability	Rate of Taper	Min.	Max., ° F	Inner Ring Type	Bearing Trade No.		Each	For Shaft Dia., mm		Each
Open







				Steel

				20	47	14	1	2,200	14,000	4°	1:12	Not Rated	240	Standard	1204K	7755N11	000000	—	———	0


				20	52	15	1	2,800	12,000	4°	1:12	Not Rated	240	Standard	1304K	7755N13	00000	—	———	0
				25	52	15	1	2,700	12,000	4°	1:12	Not Rated	240	Standard	1205K	7755N15	00000	—	———	0
				25	52	18	1	2,750	12,000	4°	1:12	Not Rated	240	Standard	2205K	7755N16	00000	20	4449N22	000000
				30	62	16	1	3,550	10,000	4°	1:12	Not Rated	240	Standard	1206K	7755N19	00000	25	4449N18	00000
				30	72	27	1	7,150	8,000	4°	1:12	Not Rated	240	Standard	2306K	7755N23	000000	25	7835T147	00000
				35	72	17	1	3,550	8,500	4°	1:12	Not Rated	240	Standard	1207K	7755N24	00000	30	4449N19	00000
				40	80	18	1	4,300	7,500	4°	1:12	Not Rated	240	Standard	1208K	7755N28	00000	35	4449N21	00000
				40	80	23	1	5,000	7,500	4°	1:12	Not Rated	240	Standard	2208K	7755N29	000000	35	4449N23	00000
				45	85	23	1	5,200	7,100	4°	1:12	Not Rated	240	Standard	2209K	7755N34	000000	40	4449N24	00000
				45	100	36	1	12,350	5,600	4°	1:12	Not Rated	240	Standard	2309K	7755N36	000000	40	7835T154	00000


				55	100	25	1	6,000	6,000	4°	1:12	Not Rated	240	Standard	2211K	7755N43	000000	50	4449N25	00000

Square-Bore Ball Bearings

The inside corners of these bearings grip square shafts as they turn, so you don't need set screws to hold them in place. They're a good choice when your setup needs to come apart frequently, since there aren't extra mounting steps.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

							Temp. Range, ° F
	For Shaft Wd., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Sealed







				Steel

				26	80	18	1	7,300	500	-20	200	Extended	W208PP6	4469N11	000000


				29.5	80	18	1	7,300	500	-20	200	Extended	W208PP5	4469N12	00000
				38.5	100	33.3	1	9,750	500	-20	200	Extended	GW211PP17	4469N14	00000
				45	110	38.2	1	11,800	500	-20	200	Extended	GW212PP50	4469N15	000000

Ball Bearings

Compatible Products for This Ball Bearing

Permanently Lubricated Ball Bearings

Flanged Ball Bearings

Angular Contact Ball Bearings

High-Precision Ball Bearings

Ball Bearings for Food and Beverage

Quick-Mount Ball Bearings

Self-Aligning Ball Bearings

Dry-Running Ball Bearings

Ball Bearings with Retaining Ring

Electrically Insulating Ball Bearings

Four-Point Angular Contact Ball Bearings

High-Precision Angular Contact Ball Bearings

High-Load Dry-Running Ball Bearings

Insert Bearings

One-Way-Locking Ball Bearings

Dry-Running Flanged Ball Bearings

High-Temperature Graphite-Lubricated Ball Bearings

Quick-Mount Ball Bearings for Food and Beverage

High-Precision Flanged Ball Bearings

Hex-Bore Ball Bearings

Tapered-Bore Ball Bearings

Square-Bore Ball Bearings