McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    320 Products

    Center-Locating Transfer Punches for Unthreaded Holes

    Image of Product. Front orientation. Transfer Punches. Center-Locating Transfer Punches for Unthreaded Holes.
    Fit these through existing holes and mark the center of the hole in a second workpiece.
    Inch
    Dia.
    Dia. Tolerance
    Lg.
    Punch
    Material
    Grip
    Texture
    Each
    1/16"-0.0025" to -0.0015"5"SteelSmooth3374A11300000
    5/64"-0.0025" to -0.0015"5"SteelSmooth3374A1150000
    3/32"-0.0025" to -0.0015"5"SteelSmooth3374A120000
    7/64"-0.003" to -0.002"5"SteelSmooth3374A130000
    1/8"-0.003" to -0.002"5"SteelSmooth3374A140000
    9/64"-0.003" to -0.002"5"SteelSmooth3374A150000
    5/32"-0.003" to -0.002"5"SteelSmooth3374A160000
    11/64"-0.003" to -0.002"5"SteelSmooth3374A170000
    3/16"-0.003" to -0.002"5"SteelSmooth3374A180000
    13/64"-0.003" to -0.002"5"SteelSmooth3374A190000
    7/32"-0.003" to -0.002"5"SteelSmooth3374A210000
    15/64"-0.003" to -0.002"5"SteelSmooth3374A220000
    1/4"-0.003" to -0.002"5"SteelSmooth3374A230000
    17/64"-0.003" to -0.002"5"SteelSmooth3374A240000
    9/32"-0.003" to -0.002"5"SteelSmooth3374A250000
    19/64"-0.003" to -0.002"5"SteelSmooth3374A260000
    5/16"-0.003" to -0.002"5"SteelSmooth3374A270000
    21/64"-0.003" to -0.002"5"SteelSmooth3374A280000
    11/32"-0.003" to -0.002"5"SteelSmooth3374A290000
    23/64"-0.003" to -0.002"5"SteelSmooth3374A310000
    3/8"-0.003" to -0.002"5"SteelSmooth3374A320000
    Center-Locating Punch for Unthreaded Holes, 3/8" Diameter
    EachIn stock
    25/64"-0.003" to -0.002"5"SteelSmooth3374A330000
    13/32"-0.003" to -0.002"5"SteelSmooth3374A340000
    27/64"-0.003" to -0.002"5"SteelSmooth3374A350000
    7/16"-0.003" to -0.002"5"SteelSmooth3374A360000
    29/64"-0.003" to -0.002"5"SteelSmooth3374A370000
    15/32"-0.003" to -0.002"5"SteelSmooth3374A380000
    31/64"-0.003" to -0.002"5"SteelSmooth3374A390000
    1/2"-0.003" to -0.002"5"SteelSmooth3374A4100000
    33/64"-0.003" to -0.002"5"SteelSmooth3374A4200000
    17/32"-0.003" to -0.002"5"SteelSmooth3374A4300000
    35/64"-0.0035" to -0.0025"5"SteelSmooth3374A43100000
    9/16"-0.0035" to -0.0025"5"SteelSmooth3374A4400000
    37/64"-0.0035" to -0.0025"5"SteelSmooth3374A4500000
    19/32"-0.0035" to -0.0025"5"SteelSmooth3374A4600000
    39/64"-0.0035" to -0.0025"5"SteelSmooth3374A46100000
    5/8"-0.0035" to -0.0025"5"SteelSmooth3374A4700000
    41/64"-0.0035" to -0.0025"5"SteelSmooth3374A4800000
    21/32"-0.0035" to -0.0025"5"SteelSmooth3374A4900000
    43/64"-0.0035" to -0.0025"5"SteelSmooth3374A49100000
    11/16"-0.0035" to -0.0025"5"SteelSmooth3374A5100000
    45/64"-0.0035" to -0.0025"5"SteelSmooth3374A51100000
    23/32"-0.0035" to -0.0025"5"SteelSmooth3374A51200000
    47/64"-0.0035" to -0.0025"5"SteelSmooth3374A51300000
    3/4"-0.0035" to -0.0025"5"SteelSmooth3374A5200000
    49/64"-0.0035" to -0.0025"5"SteelSmooth3374A5300000
    25/32"-0.0035" to -0.0025"5"SteelSmooth3374A5400000
    51/64"-0.0035" to -0.0025"5"SteelSmooth3374A54100000
    13/16"-0.0035" to -0.0025"5"SteelSmooth3374A5500000
    53/64"-0.0035" to -0.0025"5"SteelSmooth3374A55100000
    27/32"-0.0035" to -0.0025"5"SteelSmooth3374A55200000
    55/64"-0.0035" to -0.0025"5"SteelSmooth3374A55300000
    7/8"-0.0035" to -0.0025"5"SteelSmooth3374A5600000
    57/64"-0.0035" to -0.0025"5"SteelSmooth3374A56100000
    29/32"-0.0035" to -0.0025"5"SteelSmooth3374A5700000
    59/64"-0.0035" to -0.0025"5"SteelSmooth3374A57100000
    15/16"-0.0035" to -0.0025"5"SteelSmooth3374A5800000
    61/64"-0.0035" to -0.0025"5"SteelSmooth3374A58100000
    31/32"-0.0035" to -0.0025"5"SteelSmooth3374A58200000
    63/64"-0.0035" to -0.0025"5"SteelSmooth3374A58300000
    1"-0.0035" to -0.0025"5"SteelSmooth3374A5900000
    1 1/32"-0.0035" to -0.0025"5"SteelSmooth3374A6200000
    1 1/16"-0.0035" to -0.0025"5"SteelSmooth3374A6100000
    1 3/32"-0.0035" to -0.0025"5"SteelSmooth3374A6300000
    1 1/8"-0.0035" to -0.0025"5"SteelSmooth3374A6400000
    1 3/16"-0.0035" to -0.0025"5"SteelSmooth3374A6500000
    1 1/4"-0.0035" to -0.0025"5"SteelSmooth3374A6600000
    1 5/16"-0.0035" to -0.0025"5"SteelSmooth3374A6700000
    1 3/8"-0.0035" to -0.0025"5"SteelSmooth3374A6800000
    1 1/2"-0.0035" to -0.0025"5"SteelSmooth3374A7100000
    1 3/4"-0.0035" to -0.0025"5"SteelSmooth3374A7500000
    2"-0.0035" to -0.0025"5"SteelSmooth3374A79000000
    Metric
    Dia.,
    mm
    Dia. Tolerance
    Lg.
    Punch
    Material
    Grip
    Texture
    Each
    1-0.0025" to -0.0015"5"SteelSmooth8962A42100000
    1.5-0.0025" to -0.0015"5"SteelSmooth8962A4220000
    2-0.0025" to -0.0015"5"SteelSmooth8962A4230000
    2.5-0.003" to -0.002"5"SteelSmooth8962A4240000
    3-0.003" to -0.002"5"SteelSmooth8962A4250000
    3.5-0.003" to -0.002"5"SteelSmooth8962A4260000
    4-0.003" to -0.002"5"SteelSmooth8962A4270000
    4.5-0.003" to -0.002"5"SteelSmooth8962A4280000
    5-0.003" to -0.002"5"SteelSmooth8962A4290000
    5.5-0.003" to -0.002"5"SteelSmooth8962A4310000
    6-0.003" to -0.002"5"SteelSmooth8962A4320000
    6.5-0.003" to -0.002"5"SteelSmooth8962A4330000
    7-0.003" to -0.002"5"SteelSmooth8962A4340000
    7.5-0.003" to -0.002"5"SteelSmooth8962A4350000
    8-0.003" to -0.002"5"SteelSmooth8962A43600000
    8.5-0.003" to -0.002"5"SteelSmooth8962A43700000
    9-0.003" to -0.002"5"SteelSmooth8962A43800000
    9.5-0.003" to -0.002"5"SteelSmooth8962A43900000
    10-0.003" to -0.002"5"SteelSmooth8962A44100000
    10.5-0.003" to -0.002"5"SteelSmooth8962A44200000
    11-0.003" to -0.002"5"SteelSmooth8962A44300000
    11.5-0.003" to -0.002"5"SteelSmooth8962A44400000
    12-0.003" to -0.002"5"SteelSmooth8962A44500000
    12.5-0.003" to -0.002"5"SteelSmooth8962A44600000
    13-0.003" to -0.002"5"SteelSmooth8962A44700000
    13.5-0.0035" to -0.0025"5"SteelSmooth8962A44800000
    14-0.0035" to -0.0025"5"SteelSmooth8962A44900000
    14.5-0.0035" to -0.0025"5"SteelSmooth8962A45100000
    15-0.0035" to -0.0025"5"SteelSmooth8962A45200000
    16-0.0035" to -0.0025"5"SteelSmooth8962A45300000
    17-0.0035" to -0.0025"5"SteelSmooth8962A45400000
    18-0.0035" to -0.0025"5"SteelSmooth8962A45500000
    19-0.0035" to -0.0025"5"SteelSmooth8962A45600000
    20-0.0035" to -0.0025"5"SteelSmooth8962A45700000
    21-0.0035" to -0.0025"5"SteelSmooth8962A45800000
    22-0.0035" to -0.0025"5"SteelSmooth8962A45900000
    23-0.0035" to -0.0025"5"SteelSmooth8962A46100000
    24-0.0035" to -0.0025"5"SteelSmooth8962A46200000
    25-0.0035" to -0.0025"5"SteelSmooth8962A46300000
    26-0.0035" to -0.0025"5"SteelSmooth8962A46400000
    Letter Size
    Letter
    Size
    Dia. Tolerance
    Lg.
    Punch
    Material
    Grip
    Texture
    Each
    A-0.003" to -0.002"5"SteelSmooth3374A94100000
    B-0.003" to -0.002"5"SteelSmooth3374A9420000
    C-0.003" to -0.002"5"SteelSmooth3374A9430000
    D-0.003" to -0.002"5"SteelSmooth3374A9440000
    E-0.003" to -0.002"5"SteelSmooth3374A9450000
    F-0.003" to -0.002"5"SteelSmooth3374A9460000
    G-0.003" to -0.002"5"SteelSmooth3374A9470000
    H-0.003" to -0.002"5"SteelSmooth3374A9480000
    I-0.003" to -0.002"5"SteelSmooth3374A9490000
    J-0.003" to -0.002"5"SteelSmooth3374A9510000
    K-0.003" to -0.002"5"SteelSmooth3374A9520000
    L-0.003" to -0.002"5"SteelSmooth3374A9530000
    M-0.003" to -0.002"5"SteelSmooth3374A9540000
    N-0.003" to -0.002"5"SteelSmooth3374A9550000
    O-0.003" to -0.002"5"SteelSmooth3374A9560000
    P-0.003" to -0.002"5"SteelSmooth3374A9570000
    Q-0.003" to -0.002"5"SteelSmooth3374A9580000
    R-0.003" to -0.002"5"SteelSmooth3374A9590000
    S-0.003" to -0.002"5"SteelSmooth3374A9610000
    T-0.003" to -0.002"5"SteelSmooth3374A9620000
    U-0.003" to -0.002"5"SteelSmooth3374A9630000
    V-0.003" to -0.002"5"SteelSmooth3374A9640000
    W-0.003" to -0.002"5"SteelSmooth3374A9650000
    X-0.003" to -0.002"5"SteelSmooth3374A9660000
    Y-0.003" to -0.002"5"SteelSmooth3374A9670000
    Z-0.003" to -0.002"5"SteelSmooth3374A9680000
    Wire Gauge
    AWG
    Dia. Tolerance
    Lg.
    Punch
    Material
    Grip
    Texture
    Each
    60-0.0025" to -0.0015"5"SteelSmooth3374A87600000
    59-0.0025" to -0.0015"5"SteelSmooth3374A8750000
    58-0.0025" to -0.0015"5"SteelSmooth3374A8740000
    57-0.0025" to -0.0015"5"SteelSmooth3374A8730000
    56-0.0025" to -0.0015"5"SteelSmooth3374A8720000
    55-0.0025" to -0.0015"5"SteelSmooth3374A8710000
    54-0.0025" to -0.0015"5"SteelSmooth3374A8690000
    53-0.0025" to -0.0015"5"SteelSmooth3374A8680000
    52-0.0025" to -0.0015"5"SteelSmooth3374A8670000
    51-0.0025" to -0.0015"5"SteelSmooth3374A8660000
    50-0.0025" to -0.0015"5"SteelSmooth3374A8650000
    49-0.0025" to -0.0015"5"SteelSmooth3374A8640000
    48-0.0025" to -0.0015"5"SteelSmooth3374A8630000
    47-0.0025" to -0.0015"5"SteelSmooth3374A8620000
    46-0.0025" to -0.0015"5"SteelSmooth3374A8610000
    45-0.0025" to -0.0015"5"SteelSmooth3374A8590000
    44-0.0025" to -0.0015"5"SteelSmooth3374A8580000
    43-0.0025" to -0.0015"5"SteelSmooth3374A8570000
    42-0.0025" to -0.0015"5"SteelSmooth3374A8560000
    41-0.0025" to -0.0015"5"SteelSmooth3374A8550000
    40-0.0025" to -0.0015"5"SteelSmooth3374A8540000
    39-0.003" to -0.002"5"SteelSmooth3374A8530000
    38
    		-0.003" to -0.002"5"SteelSmooth3374A8520000
    37-0.003" to -0.002"5"SteelSmooth3374A8510000
    36
    		-0.003" to -0.002"5"SteelSmooth3374A8490000
    35-0.003" to -0.002"5"SteelSmooth3374A8480000
    34
    		-0.003" to -0.002"5"SteelSmooth3374A8470000
    33
    		-0.003" to -0.002"5"SteelSmooth3374A8460000
    32
    		-0.003" to -0.002"5"SteelSmooth3374A8450000
    31-0.003" to -0.002"5"SteelSmooth3374A8440000
    30
    		-0.003" to -0.002"5"SteelSmooth3374A8430000
    29
    		-0.003" to -0.002"5"SteelSmooth3374A8420000
    28
    		-0.003" to -0.002"5"SteelSmooth3374A8410000
    27-0.003" to -0.002"5"SteelSmooth3374A8390000
    26
    		-0.003" to -0.002"5"SteelSmooth3374A8380000
    25-0.003" to -0.002"5"SteelSmooth3374A8370000
    24
    		-0.003" to -0.002"5"SteelSmooth3374A8360000
    23
    		-0.003" to -0.002"5"SteelSmooth3374A8350000
    22
    		-0.003" to -0.002"5"SteelSmooth3374A8340000
    21-0.003" to -0.002"5"SteelSmooth3374A8330000
    20
    		-0.003" to -0.002"5"SteelSmooth3374A8320000
    19-0.003" to -0.002"5"SteelSmooth3374A8310000
    18
    		-0.003" to -0.002"5"SteelSmooth3374A8290000
    17
    		-0.003" to -0.002"5"SteelSmooth3374A8280000
    16
    		-0.003" to -0.002"5"SteelSmooth3374A8270000
    15
    		-0.003" to -0.002"5"SteelSmooth3374A8260000
    14
    		-0.003" to -0.002"5"SteelSmooth3374A8250000
    13-0.003" to -0.002"5"SteelSmooth3374A8240000
    12
    		-0.003" to -0.002"5"SteelSmooth3374A8230000
    11-0.003" to -0.002"5"SteelSmooth3374A8220000
    10
    		-0.003" to -0.002"5"SteelSmooth3374A8210000
    9-0.003" to -0.002"5"SteelSmooth3374A8190000
    8
    		-0.003" to -0.002"5"SteelSmooth3374A8180000
    7-0.003" to -0.002"5"SteelSmooth3374A8170000
    6
    		-0.003" to -0.002"5"SteelSmooth3374A8160000
    5-0.003" to -0.002"5"SteelSmooth3374A8150000
    4
    		-0.003" to -0.002"5"SteelSmooth3374A8140000
    3
    		-0.003" to -0.002"5"SteelSmooth3374A8130000
    2
    		-0.003" to -0.002"5"SteelSmooth3374A8120000
    1
    		-0.003" to -0.002"5"SteelSmooth3374A8110000

    Center-Locating Transfer Punch Sets for Unthreaded Holes

    Image of Product. Front orientation. Transfer Punches. Center-Locating Transfer Punch Sets for Unthreaded Holes, Inch, 28 Pieces.
    Image of Product. Front orientation. Transfer Punches. Center-Locating Transfer Punch Sets for Unthreaded Holes, Inch, 33 Pieces.
    Image of Product. Front orientation. Transfer Punches. Center-Locating Transfer Punch Sets for Unthreaded Holes, Metric, 25 Pieces.
    Image of Product. Front orientation. Transfer Punches. Center-Locating Transfer Punch Sets for Unthreaded Holes, Letter Size, 26 Pieces.
    Image of Product. Wire Gauge (60-Punch Set). Front orientation. Transfer Punches. Center-Locating Transfer Punch Sets for Unthreaded Holes, Wire Gauge, 60 Pieces.

    Inch

    28 Pieces

    Inch

    33 Pieces

    Metric

    25 Pieces

    Letter Size

    26 Pieces

    Wire Gauge

    (60-Punch Set)

    Fit these through existing holes and mark the center of the hole in a second workpiece.
    No. of
    Pieces
    Includes
    Tolerance
    Rating
    Lg.
    Punch
    Material
    Grip
    Texture
    Container
    Type
    Each
    Inch
    28Punches with 3/32" to 1/2" (in 1/64ths increments), 17/32" Point Dia.Undersized5"SteelSmoothMetal Stand3374A110000000
    33Punches with 1/2" to 1" (in 1/64ths increments) Point Dia.Undersized5"SteelSmoothMetal Stand3374A93000000
     
    Metric
    25Punches with 1 to 13 mm (in 0.5 mm increments) Point Dia.Undersized5"SteelSmoothMetal Stand8962A41000000
    25Punches with 13 to 25 mm (in 0.5 mm increments) Point Dia.Undersized5"SteelSmoothMetal Stand8962A35000000
     
    Letter Size
    26Punches with A to Z LettersUndersized5"SteelSmoothMetal Stand3374A91000000
     
    Wire Gauge
    60Punches with 60 to 1 Wire Gauge SizesUndersized5"SteelSmoothMetal Stand3374A92000000
     

    Expandable Center-Locating Transfer Punch Sets for Unthreaded Holes

    Image of Product. Front orientation. Transfer Punches. Expandable Center-Locating Transfer Punch Sets for Unthreaded Holes.
    Insert these punches into an existing hole and twist the handle to open the end of the punch. The point automatically centers once the punch has fit the hole size; strike it with a hammer to mark the center.
    Material
    No. of
    Pieces
    Includes
    Handle
    Punch
    Grip
    Texture
    Container
    Type
    Each
    3One punch for 1/4"-5/16", 6-8mm diameter (3 3/4" length)
    One punch for 5/16"-7/16", 8-11mm diameter (4 1/8" length)
    One punch for 7/16-5/8", 11-16mm diameter (4 1/2" length)    		SteelSteelKnurledPlastic Case3380A110000000

    Center-Locating Transfer Punches for Threaded Holes

    Image of Product. Front orientation. Transfer Punches. Center-Locating Transfer Punches for Threaded Holes.
    Also known as transfer screws, these punches can be used in any threaded hole to transfer the hole location. Use the handle to screw a punch into a hole. Place your workpiece against the punch and strike it with a hammer to mark the hole location.
    Thread
    Size
    Includes
    Punch
    Material
    Grip
    Texture
    Each
    4-40
    		Handle
    Six Punches    		SteelSmooth3385A11000000
    4-48
    		Handle
    Six Punches    		SteelSmooth3385A1200000
    5-40
    		Handle
    Six Punches    		SteelSmooth3385A6100000
    5-44
    		Handle
    Six Punches    		SteelSmooth3385A6200000
    6-32
    		Handle
    Six Punches    		SteelSmooth3385A3100000
    6-40
    		Handle
    Six Punches    		SteelSmooth3385A5100000
    8-32
    		Handle
    Six Punches    		SteelSmooth3385A3200000
    8-36
    		Handle
    Six Punches    		SteelSmooth3385A6300000
    10-24
    		Handle
    Six Punches    		SteelSmooth3385A1300000
    10-32
    		Handle
    Six Punches    		SteelSmooth3385A1400000
    12-24
    		Handle
    Six Punches    		SteelSmooth3385A5400000
    12-28
    		Handle
    Six Punches    		SteelSmooth3385A5500000
    1/4"-20
    		Handle
    Six Punches    		SteelSmooth3385A1600000
    1/4"-28
    		Handle
    Six Punches    		SteelSmooth3385A1700000
    5/16"-18
    		Handle
    Six Punches    		SteelSmooth3385A1800000
    5/16"-24
    		Handle
    Six Punches    		SteelSmooth3385A5200000
    3/8"-16
    		Handle
    Six Punches    		SteelSmooth3385A1900000
    3/8"-24
    		Handle
    Six Punches    		SteelSmooth3385A2100000
    7/16"-14
    		Handle
    Six Punches    		SteelSmooth3385A2200000
    7/16"-20
    		Handle
    Six Punches    		SteelSmooth3385A6400000
    1/2"-13
    		Handle
    Six Punches    		SteelSmooth3385A2300000
    1/2"-20
    		Handle
    Six Punches    		SteelSmooth3385A2400000
    9/16"-12
    		Handle
    Six Punches    		SteelSmooth3385A2500000
    9/16"-18
    		Handle
    Six Punches    		SteelSmooth3385A5600000
    5/8"-11
    		Handle
    Six Punches    		SteelSmooth3385A2600000
    5/8"-18
    		Handle
    Six Punches    		SteelSmooth3385A5700000
    3/4"-10
    		Handle
    Six Punches    		SteelSmooth3385A2700000
    3/4"-16
    		Handle
    Six Punches    		SteelSmooth3385A5800000
    7/8"-9
    		Handle
    Six Punches    		SteelSmooth3385A2800000
    7/8"-14
    		Handle
    Six Punches    		SteelSmooth3385A5900000
    1"-8
    		Handle
    Six Punches    		SteelSmooth3385A2900000
    1"-14
    		Handle
    Six Punches    		SteelSmooth3385A6500000
    M3
    		Handle
    Six Punches    		SteelSmooth3385A7100000
    M4
    		Handle
    Six Punches    		SteelSmooth3385A4100000
    M5
    		Handle
    Six Punches    		SteelSmooth3385A4200000
    M6
    		Handle
    Six Punches    		SteelSmooth3385A4300000
    M8
    		Handle
    Six Punches    		SteelSmooth3385A4400000
    M10
    		Handle
    Six Punches    		SteelSmooth3385A4500000
    M12
    		Handle
    Six Punches    		SteelSmooth3385A4600000
    M14
    		Handle
    Six Punches    		SteelSmooth3385A7200000
    M16
    		Handle
    Six Punches    		SteelSmooth3385A7300000
    M20
    		Handle
    Six Punches    		SteelSmooth3385A7400000
    M24
    		Handle
    Six Punches    		SteelSmooth3385A7500000

    Center-Locating Transfer Punches for Unthreaded Closed-End Holes

    Image of Product. Front orientation. Transfer Punches. Center-Locating Transfer Punches for Unthreaded Closed-End Holes.
    Also known as blind-hole spotters, these punches fit into closed-end holes and mark the center of a complementary hole. Once the punch is fitted in a hole, place your workpiece against the punch and strike with a hammer to make an indentation.
    Dia.
    Punch
    Material
    Grip
    Texture
    Pkg.
    Qty.
    Pkg.
    1/8"SteelSmooth63414A211000000
    5/32"SteelSmooth63414A21300000
    3/16"SteelSmooth63414A21500000
    7/32"SteelSmooth63414A21700000
    1/4"SteelSmooth63414A21900000
    9/32"SteelSmooth63414A22200000
    5/16"SteelSmooth63414A22400000
    11/32"SteelSmooth63414A22600000
    3/8"SteelSmooth63414A22800000
    13/32"SteelSmooth63414A23100000
    7/16"SteelSmooth63414A23300000
    15/32"SteelSmooth63414A23500000
    1/2"SteelSmooth63414A23700000
    17/32"SteelSmooth63414A23900000
    9/16"SteelSmooth63414A24100000
    19/32"SteelSmooth63414A24300000
    5/8"SteelSmooth63414A24400000
    21/32"SteelSmooth63414A24600000
    11/16"SteelSmooth63414A24700000
    23/32"SteelSmooth63414A24800000
    3/4"SteelSmooth63414A24900000
    25/32"SteelSmooth63414A25200000
    13/16"SteelSmooth63414A25300000
    27/32"SteelSmooth63414A25400000
    7/8"SteelSmooth63414A25500000
    29/32"SteelSmooth63414A25600000
    15/16"SteelSmooth63414A25700000
    31/32"SteelSmooth63414A25800000
    1"SteelSmooth63414A25900000
    3 mmSteelSmooth63414A3100000
    4 mmSteelSmooth63414A3200000
    5 mmSteelSmooth63414A3300000
    6 mmSteelSmooth63414A3400000
    7 mmSteelSmooth63414A3500000
    8 mmSteelSmooth63414A3600000
    9 mmSteelSmooth63414A3700000
    10 mmSteelSmooth63414A3800000
    11 mmSteelSmooth63414A3900000
    12 mmSteelSmooth63414A4100000
    13 mmSteelSmooth63414A4200000

    Multi-Diameter Center-Locating Transfer Punches for Unthreaded Holes

    Image of Product. Front orientation. Transfer Punches. Multi-Diameter Center-Locating Transfer Punches for Unthreaded Holes.
    Push down on the spring-loaded cone to center the punch in a variety of round and square hole sizes. Then strike the punch with a hammer to make a precise mark in the center of your workpiece.
    Material
    Diameter
    Lg.
    For Max.
    Material Dp.
    Handle
    Punch
    Grip
    Texture
    Each
    3/16" to 5/8", 5 mm to 16 mm3"2"SteelSteelKnurled8963A1000000
    3/16" to 1 1/16", 5 mm to 27 mm4 1/2"2"SteelSteelKnurled8963A200000

    Center-Locating Transfer Punch Sets for Threaded Holes

    Image of Product. Front orientation. Transfer Punches. Center-Locating Transfer Punch Sets for Threaded Holes.
    Also known as transfer screws, these punches can be used in any threaded hole to transfer the hole location. Use the handle to screw a punch into a hole. Place your workpiece against the punch and strike it with a hammer to mark the hole location.
    No. of
    Pieces
    Includes
    Punch
    Material
    Grip
    Texture
    Container
    Type
    Each
    16Handle
    Four punches each in the following sizes: 1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14    		SteelSmoothPlastic Case3385A77000000
    16Handle
    Four punches each in the following sizes: 1/2"-13, 9/16"-12, 5/8"-11, 3/4"-10    		SteelSmoothPlastic Case3385A7800000
    16Handle
    Four punches each in the following sizes: 4-40, 6-32, 8-32, 10-24    		SteelSmoothPlastic Case3385A7900000
    16Handle
    Four punches each in the following sizes: M14, M16, M20, M24    		SteelSmoothPlastic Case3385A8100000
    16Handle
    Four punches each in the following sizes: M6, M8, M10, M12    		SteelSmoothPlastic Case3385A8200000
    16Handle
    Four punches each in the following sizes: M3, M4, M5, M6    		SteelSmoothPlastic Case3385A8300000

    Self-Aligning Center-Locating Transfer Punches for Threaded Holes

    Image of Product. Front orientation. Transfer Punches. Self-Aligning Center-Locating Transfer Punches for Threaded Holes.
    Also known as transfer screws, these punches have a uniform shoulder height so you can quickly transfer multiple hole locations at once. Thread the punches into closed-end holes and tighten with pliers or a wrench, then strike the workpiece with a hammer to mark the holes.
    Thread
    Size
    Shoulder
    Ht.
    Punch
    Material
    Grip
    Texture
    Each
    10-24
    		0.02"SteelSmooth3400A1100000
    10-32
    		0.02"SteelSmooth3400A120000
    1/4"-20
    		0.02"SteelSmooth3400A140000
    1/4"-28
    		0.02"SteelSmooth3400A310000
    5/16"-18
    		0.02"SteelSmooth3400A350000
    5/16"-24
    		0.02"SteelSmooth3400A320000
    3/8"-16
    		0.02"SteelSmooth3400A160000
    3/8"-24
    		0.02"SteelSmooth3400A330000
    7/16"-14
    		0.02"SteelSmooth3400A170000
    7/16"-20
    		0.02"SteelSmooth3400A340000
    1/2"-13
    		0.02"SteelSmooth3400A180000
    1/2"-20
    		0.02"SteelSmooth3400A360000
    5/8"-11
    		0.02"SteelSmooth3400A190000
    3/4"-10
    		0.02"SteelSmooth3400A210000

    Center-Locating Transfer Punch Sets for Unthreaded Closed-End Holes

    Image of Product. Front orientation. Transfer Punches. Center-Locating Transfer Punch Sets for Unthreaded Closed-End Holes, 66 Pieces.
    Image of Product. Front orientation. Transfer Punches. Center-Locating Transfer Punch Sets for Unthreaded Closed-End Holes, 108 Pieces.

    66 Pieces

    108 Pieces

    Also known as blind-hole spotters, these punches fit into closed-end holes and mark the center of a complementary hole. Once the punch is fitted in a hole, place your workpiece against the punch and strike with a hammer to make an indentation.
    No. of
    Pieces
    Includes
    Punch
    Material
    Grip
    Texture
    Container
    Type
    Each
    66Punches with 11/16" to 1" (in 1/32nds increments) Point Dia.SteelSmoothMetal Case3414A120000000
    108Punches with 1/8" to 21/32" (in 1/32nds increments) Point Dia.SteelSmoothMetal Case3414A11000000

    Self-Aligning Center-Locating Transfer Punch Sets for Threaded Holes

    Image of Product. Front orientation. Transfer Punches. Self-Aligning Center-Locating Transfer Punch Sets for Threaded Holes.
    Also known as transfer screws, these punches have a uniform shoulder height so you can quickly transfer multiple hole locations at once. Thread the punches into closed-end holes and tighten with pliers or a wrench, then strike the workpiece with a hammer to mark the holes.
    No. of
    Pieces
    Includes
    Shoulder
    Ht.
    Punch
    Material
    Grip
    Texture
    Each
    12Four punches each in the following sizes: 10-24, 10-32, 1/4"-200.02"SteelSmooth3400A22000000
    12Four punches each in the following sizes: 1/4"-20, 5/16"-18, 3/8"-160.02"SteelSmooth3400A2300000
    12Four punches each in the following sizes: 5/16"-18, 3/8"-16, 1/2"-130.02"SteelSmooth3400A2400000
    12Four punches each in the following sizes: 7/16"-14, 1/2"-13, 5/8"-110.02"SteelSmooth3400A2500000
    12Four punches each in the following sizes: 1/2"-13, 5/8"-11, 3/4"-100.02"SteelSmooth3400A2600000

    Expandable Center-Locating Transfer Punches for Unthreaded Holes

    Image of Product. Front orientation. Transfer Punches. Expandable Center-Locating Transfer Punches for Unthreaded Holes.
    Image of Product. Expanded. Front orientation. ZoomedIn view. Contains Border. Transfer Punches. Expandable Center-Locating Transfer Punches for Unthreaded Holes.

    Expanded

    Insert these punches into an existing hole and twist the handle to open the end of the punch. The point automatically centers once the punch has fit the hole size; strike it with a hammer to mark the center.
    Material
    Diameter
    Lg.
    Handle
    Punch
    Grip
    Texture
    Each
    1/4" to 5/16", 6 mm to 8 mm3 3/4"SteelSteelKnurled3380A12000000
    5/16" to 7/16", 8 mm to 11 mm4 1/8"SteelSteelKnurled3380A1300000
    7/16" to 5/8", 11 mm to 16 mm4 1/2"SteelSteelKnurled3380A1400000
    back to top