McMaster-Carr logo
    Filter by
    System of Measurement
    For Rigid Conduit Trade Size
    Industrial Info Snippet
    For EMT Conduit Trade Size
    Hanger Type
    For IMC Conduit Trade Size
    Industrial Info Snippet
    Load Location
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    647 Products

    Pivoting Loop Pipe Hangers

    Secure pipe overhead and allow it to tilt or rotate as needed. These pipe hangers reduce stress on joints and keep pipe aligned, even when it shifts. Attach these hangers to beams or ceilings with threaded rod.
    360° Rotation—Rotate to allow movement and flexibility when pipes need to be connected at non-standard angles and when working in tight spaces.
    15° Tilt—Swing up and down to accommodate slight misalignments between the pipe and mounting surface caused by vibration, thermal expansion, or shifting loads. Also known as Clevis Hangers.
    Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture, but won't stand up to chemicals.
    Copper-Plated Steel—Won't corrode when used with copper tubing.
    PVC-Coated Steel—Prevent wear from metal-to-metal contact due to movement or thermal expansion.
    Rubber-Coated Steel—Prevent wear from metal-to-metal contact and moisture.
    304 Stainless Steel—Withstand mild chemicals and solvents and won't rust in wet environments.
    316 Stainless Steel—Our most corrosion-resistant metal pipe hangers. These won’t degrade when exposed to harsh weather, salt water, and most chemicals.
    ID
    Inch
    Metric,
    mm
    For Pipe
    Size
    For Copper
    Tube Size
    For Thread
    Size
    Wt. Cap.,
    lb.
    Mounting
    Hole Dia.
    Pkg.
    Qty.
    Pkg.
    360° Rotation
    Image of Product. Front orientation. Contains Annotated. Pipe Hangers. Pivoting Loop Pipe Hangers, Rotate.
     
    Zinc-Plated Steel
    13/16"211/2
    		5/8
    		3/8"-16
    		400—103064T11000000
    1 1/16"273/4
    		—3/8"-16
    		400—103064T1200000
    1 5/16"331
    		—3/8"-16
    		400—103064T1300000
    1 11/16"431 1/4
    		1 1/2
    		3/8"-16
    		400—103064T1400000
    1 7/8"481 1/2
    		—3/8"-16
    		400—103064T1500000
    2 3/8"602
    		—3/8"-16
    		400—103064T1600000
    2 7/8"732 1/2
    		—1/2"-13
    		600—13064T170000
    3 1/2"893
    		—1/2"-13
    		600—13064T180000
    4"1023 1/2
    		—1/2"-13
    		600—13064T1900000
    4 1/2"1144
    		—5/8"-11
    		1,000—13064T2100000
    6 5/8"1686
    		—1/2"-13
    		1,250—13064T220000
     
    Copper-Plated Steel
    5/8"161/4
    		1/2
    		3/8"-16
    		400—103064T3100000
    7/8"221/2
    		3/4
    		3/8"-16
    		400—103064T3200000
    1 1/8"293/4
    		1
    		3/8"-16
    		400—103064T3300000
    1 3/8"351
    		1 1/4
    		3/8"-16
    		400—103064T3400000
    1 5/8"41—1 1/2
    		3/8"-16
    		400—103064T3500000
    2 1/8"54—2
    		3/8"-16
    		400—13064T360000
    2 5/8"67—2 1/2
    		3/8"-16
    		600—13064T370000
    3 1/8"79—3
    		3/8"-16
    		600—13064T380000
    4 1/8"1053 1/2
    		4
    		3/8"-16
    		1,000—13064T790000
     
    PVC-Coated Steel
    13/16"211/2
    		5/8
    		3/8"-16
    		610—13064T4100000
    1 1/16"273/4
    		—3/8"-16
    		610—13064T4200000
    1 5/16"331
    		—3/8"-16
    		610—13064T4300000
    1 11/16"431 1/4
    		1 1/2
    		3/8"-16
    		610—13064T4400000
    1 7/8"481 1/2
    		—3/8"-16
    		610—13064T4500000
    2 3/8"602
    		—3/8"-16
    		610—13064T4600000
    2 7/8"732 1/2
    		—1/2"-13
    		970—13064T4700000
    3 1/2"893
    		—1/2"-13
    		970—13064T4800000
    4"1023 1/2
    		—1/2"-13
    		970—13064T4900000
    4 1/2"1144
    		—5/8"-11
    		1,250—13064T5100000
     
    15° Tilt
    Image of Product. Front orientation. Contains Annotated. Pipe Hangers. Pivoting Loop Pipe Hangers, Tilt.
     
    Steel
    13/16"211/2
    		5/8
    		3/8"-16
    		7307/16"13037T120000
    1 1/16"273/4
    		—3/8"-16
    		7307/16"13037T140000
    1 5/16"331
    		—3/8"-16
    		7307/16"13037T150000
    1 11/16"431 1/4
    		1 1/2
    		3/8"-16
    		7307/16"13037T160000
    1 7/8"481 1/2
    		—3/8"-16
    		7307/16"13037T170000
    2 3/8"602
    		—3/8"-16
    		7307/16"13037T180000
    2 7/8"732 1/2
    		—1/2"-13
    		1,3509/16"13037T320000
    3 1/2"893
    		—1/2"-13
    		1,3509/16"13037T330000
    4"1023 1/2
    		—1/2"-13
    		1,3509/16"13037T220000
    4 1/2"1144
    		—5/8"-11
    		1,43011/16"13037T2300000
    5 9/16"1415
    		—5/8"-11
    		1,43011/16"13037T2400000
    6 5/8"1686
    		—3/4"-10
    		1,94013/16"13037T2500000
    8 5/8"2198
    		—3/4"-10
    		2,00013/16"13037T3400000
    10 3/4"27310
    		—7/8"-9
    		3,60015/16"13037T2700000
    12 3/4"32412
    		—7/8"-9
    		3,80015/16"13037T2800000
    14 1/8"35914—1"-8
    		4,2001 1/8"13037T4900000
     
    Zinc-Plated Steel
    13/16"211/2
    		5/8
    		3/8"-16
    		6103/8"13037T610000
    1 1/16"273/4
    		—3/8"-16
    		6103/8"13037T620000
    1 5/16"331
    		—3/8"-16
    		6103/8"13037T630000
    1 11/16"431 1/4
    		1 1/2
    		3/8"-16
    		6103/8"13037T640000
    1 7/8"481 1/2
    		—3/8"-16
    		6103/8"13037T650000
    2 3/8"602
    		—3/8"-16
    		6103/8"13037T660000
    2 7/8"732 1/2
    		—1/2"-13
    		1,1301/2"13037T670000
    3 1/2"893
    		—1/2"-13
    		1,1301/2"13037T680000
    4"1023 1/2
    		—1/2"-13
    		1,1301/2"13037T6900000
    4 1/2"1144
    		—5/8"-11
    		1,1305/8"13037T8100000
    5 9/16"1415
    		—5/8"-11
    		1,4305/8"13037T7200000
    6 5/8"1686
    		—3/4"-10
    		1,9403/4"13037T7300000
    8 5/8"2198
    		—3/4"-10
    		2,0003/4"13037T7400000
    10 3/4"27310
    		—7/8"-9
    		3,6007/8"13037T7500000
    12 3/4"32412
    		—7/8"-9
    		3,8007/8"13037T7600000
    14"35514—1"-8
    		4,2001 1/16"13037T77000000
    16"40616—1"-8
    		4,6001 1/16"13037T78000000
    18"45718—1 1/8"-7
    		4,8001 1/4"13037T915000000
    20"50820—1 1/4"-7
    		4,8001 5/16"13037T916000000
     
    Copper-Plated Steel
    5/8"16—1/2
    		3/8"-16
    		2157/16"13037T7110000
    3/4"19—3/4
    		3/8"-16
    		2157/16"13037T7120000
    1 1/8"29—1
    		3/8"-16
    		2157/16"13037T7130000
    1 3/8"35—1 1/4
    		3/8"-16
    		2157/16"13037T7140000
    1 5/8"41—1 1/2
    		3/8"-16
    		2157/16"13037T7150000
    2 1/8"54—2
    		3/8"-16
    		2157/16"13037T7160000
    3 1/8"79—3
    		1/2"-13
    		3009/16"13037T91900000
    4 1/8"105—4
    		1/2"-13
    		4409/16"13037T92100000
     
    Rubber-Coated Steel
    13/16"211/2
    		—3/8"-16
    		7307/16"13309T7390000
    1 1/16"273/4
    		—3/8"-16
    		7307/16"13309T7410000
    1 5/16"331
    		1
    		3/8"-16
    		7307/16"13309T7420000
    1 21/32"421 1/4
    		1 1/4
    		3/8"-16
    		7307/16"13309T7430000
    1 29/32"481 1/2
    		1 1/2
    		3/8"-16
    		7307/16"13309T7440000
    2 3/8"602
    		2
    		3/8"-16
    		7307/16"13309T74500000
    3 1/2"893
    		—1/2"-13
    		1,1309/16"13309T74700000
    4"1023 1/2
    		—1/2"-13
    		1,3509/16"13309T74800000
    4 1/2"1144
    		—5/8"-11
    		1,43011/16"13309T74900000
    5 9/16"1415
    		—5/8"-11
    		1,43011/16"13309T75100000
    6 5/8"1686
    		—3/4"-10
    		1,94013/16"13309T75200000
    8 5/8"2198
    		—3/4"-10
    		2,00013/16"13309T75300000
    10 3/4"27310
    		—7/8"-9
    		3,60015/16"13309T75400000
    12 3/4"32412
    		—7/8"-9
    		3,80015/16"13309T75500000
    14"35514—1"-8
    		4,2001 1/16"13309T756000000
    16"40616—1"-8
    		4,6001 1/16"13309T757000000
     
    304 Stainless Steel
    13/16"211/2
    		5/8
    		3/8"-16
    		7307/16"13309T5120000
    1 1/16"273/4
    		—3/8"-16
    		7307/16"13309T5220000
    1 5/16"331
    		—3/8"-16
    		7307/16"13309T5320000
    1 21/32"421 1/4
    		1 1/2
    		3/8"-16
    		7307/16"13309T5420000
    1 7/8"481 1/2
    		—3/8"-16
    		7307/16"13309T55200000
    2 3/8"602
    		—3/8"-16
    		7307/16"13309T56200000
    2 7/8"732 1/2
    		—1/2"-13
    		1,1309/16"13309T57200000
    3 1/2"893
    		—1/2"-13
    		1,1309/16"13309T58200000
    4"1023 1/2
    		—1/2"-13
    		1,1309/16"13309T59200000
    4 1/2"1144
    		—5/8"-11
    		1,43011/16"13309T61200000
    5 9/16"1415
    		—5/8"-11
    		1,43011/16"13309T62200000
    6 5/8"1686
    		—3/4"-10
    		1,94013/16"13309T63200000
    8 5/8"2198
    		—3/4"-10
    		2,00013/16"13309T64200000
    10 3/4"27310
    		—7/8"-9
    		3,60015/16"13309T654000000
    12 3/4"32412
    		—7/8"-9
    		3,80015/16"13309T655000000
    16"40616—1"-8
    		4,6001 1/16"13309T712000000
    18"45718—1"-8
    		4,8001 1/16"13309T713000000
    20"50820—1 1/4"-7
    		4,8001 5/16"13309T714000000
    24"61024—1 1/4"-7
    		4,8001 5/16"13309T715000000
     
    316 Stainless Steel
    13/16"211/2
    		5/8
    		3/8"-16
    		7307/16"13309T7170000
    1 1/16"273/4
    		—3/8"-16
    		7307/16"13309T71800000
    1 5/16"331
    		1
    		3/8"-16
    		7307/16"13309T71900000
    1 21/32"421 1/4
    		1 1/4
    		3/8"-16
    		7307/16"13309T72100000
    1 29/32"481 1/2
    		1 1/2
    		3/8"-16
    		7307/16"13309T72200000
    2 3/8"602
    		2
    		3/8"-16
    		7307/16"13309T72300000
    2 7/8"732 1/2
    		—1/2"-13
    		1,1309/16"13309T72400000
    3 1/2"893
    		—1/2"-13
    		1,1309/16"13309T72500000
    4 1/2"1144
    		—5/8"-11
    		1,43011/16"13309T72600000
    6 5/8"1686
    		—3/4"-10
    		1,94013/16"13309T72800000
    8 5/8"2198
    		—3/4"-10
    		2,00013/16"13309T729000000
    10 3/4"27310
    		—7/8"-9
    		3,60015/16"13309T731000000
    14"35514—1"-8
    		4,2001 1/16"13309T733000000
     
    Pipe Cradles
    Cradles provide additional support and prevent tears in insulation when routing insulated pipe through loop hangers. Also known as pipe shields.
    Adhesive Mount—Attach the cradle to the pipe's insulation with an adhesive strip.
    Clip-On Mount—Clip the tabs of the cradle directly onto the bottom of a loop hanger.
    ID
    Inch
    Metric,
    mm
    Lg.
    Wd.
    Ht.
    Thk.
    Each
    Adhesive Mount
    Image of Product. Front orientation. Pipe Cradles. Adhesive Mount.
     
    Galvanized Steel
    1 7/8"4812"2"1"1/32"9164T1100000
    2 3/8"6012"2 1/2"1 1/4"1/32"9164T130000
    2 7/8"7312"3"1 1/2"1/32"9164T150000
    3 1/2"8912"3 1/2"1 3/4"1/32"9164T170000
    4"10212"4"2"1/32"9164T210000
    4 1/2"11412"4 1/2"2 1/4"1/32"9164T230000
    5 9/16"14112"5 1/2"2 3/4"1/32"9164T270000
     
    Clip-On Mount
    Image of Product. Front orientation. Pipe Cradles. Clip-On Mount.
     
    Zinc-Plated Steel
    1 7/8"4812"2"1"3/64"2620N1100000
    2 3/8"6012"2 1/2"1 1/4"3/64"2620N1200000
    2 7/8"7312"3"1 1/2"3/64"2620N1300000
    3 1/2"8912"3 5/8"1 13/16"3/64"2620N1400000
    4"10212"4 1/8"2 1/16"3/64"2620N1500000
    4 1/2"11412"4 5/8"2 5/16"3/64"2620N1600000
    5 9/16"14112"5 11/16"2 13/16"3/64"2620N1800000
    6 5/8"16812"6 3/4"3 3/8"1/16"2620N1900000
    8 5/8"21912"8 3/4"4 3/8"1/16"2620N2200000
     

    Clamp Pipe Hangers

    Image of Product. Front orientation. Pipe Hangers. Clamp Pipe Hangers, Top Load with Bolt Closure.
    Image of Product. Front orientation. Pipe Hangers. Clamp Pipe Hangers, Bottom Load with Bolt Closure.
    Image of Product. Front orientation. Pipe Hangers. Clamp Pipe Hangers, Bottom Load with Snap Closure.

    Top Load with

    Bolt Closure

    Bottom Load

    with Bolt

    Closure

    Bottom

    Load with

    Snap

    Closure

    Tightly grip pipe, tube, and conduit and hold it firmly in place. Unlike loop hangers, which cradle lines and allow for slight movement, these hangers wrap closely around lines for a rigid, secure hold.
    Top Load with Bolt Closure—The solid base of the hanger cradles pipe. Attach to a strap (sold separately) to adjust the height of your hanger, or attach to an eye nut so you can mount it with threaded rod.
    Bottom Load with Bolt Closure—Load from the bottom so you can add or remove material without uninstalling the hanger.
    Bottom Load with Snap Closure—Faster and easier to install than bolt closures, these snap closed without any additional tools or fasteners.
    Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture, but won't stand up to chemicals.
    Galvanized Steel—These clamps won't rust in wet and outdoor environments, but they'll corrode when exposed to salt water and chemicals.
    304 Stainless Steel—Withstand mild chemicals and solvents and won't rust in wet environments.
    316 Stainless Steel—Our most corrosion-resistant metal pipe hangers. These won’t degrade when exposed to harsh weather, salt water, and most chemicals.
    ID
    For Conduit
    Trade Size
    Pipe Hangers
    Pipe Hangers with Bolt
    and Nut Included
    Inch
    Metric,
    mm
    For Pipe
    Size
    EMT
    IMC
    Rigid
    For Thread
    Size
    Wt. Cap.,
    lb.
    Mounting
    Hole Dia.
    Pkg.
    Qty.
    Pkg.
    Pkg.
    Qty.
    Pkg.
    Top Load with Bolt Closure
     
    Zinc-Plated Steel
    13/16"211/2
    		1/2
    		1/2
    		1/2
    		1/4"-20
    		2709/32"————013033T1100000
    1 1/16"273/4
    		—3/4
    		3/4
    		1/4"-20
    		2709/32"————013033T120000
    1 5/16"331
    		—1
    		1
    		1/4"-20
    		2709/32"————013033T130000
    1 11/16"431 1/4
    		—1 1/4
    		1 1/4
    		1/4"-20
    		2709/32"————013033T140000
    1 7/8"481 1/2
    		—1 1/2
    		1 1/2
    		1/4"-20
    		2709/32"————013033T150000
    2 3/8"602
    		—2
    		2
    		1/4"-20
    		2709/32"————013033T160000
    2 7/8"732 1/2
    		2 1/2
    		2 1/2
    		2 1/2
    		1/4"-20
    		5009/32"————013033T170000
    3 1/2"893
    		3
    		3
    		3
    		1/4"-20
    		5009/32"————013033T180000
    4 1/2"1144
    		4
    		4
    		4
    		1/4"-20
    		5009/32"————013033T210000
    5 9/16"1415
    		——51/4"-20
    		5009/32"————013033T320000
    6 5/8"1686
    		——61/4"-20
    		5009/32"————013033T330000
     
    Galvanized Steel
    7 5/8"1947———1/4"-20
    		3209/32"————016538N110000
    8 5/8"2198
    		———1/4"-20
    		3209/32"————016538N120000
    10 3/4"27310
    		———1/4"-20
    		3209/32"————016538N130000
    12 3/4"32412
    		———1/4"-20
    		3209/32"————016538N1400000
    14"35514———1/4"-20
    		3209/32"————016538N1500000
    16"40616———1/4"-20
    		3209/32"————016538N1600000
     
    Bottom Load with Bolt Closure
     
    Zinc-Plated Steel
    13/16"211/2
    		1/2
    		1/2
    		1/2
    		1/4"-20
    		501/4"103006T7100000103006T7800000
    1 1/16"273/4
    		—3/4
    		3/4
    		1/4"-20
    		501/4"103006T720000103006T7900000
    1 5/16"331
    		—1
    		1
    		1/4"-20
    		601/4"103006T7300000103006T8100000
    1 1/2"38—1 1/4
    		——1/4"-20
    		701/4"103006T31100000103006T31200000
    1 3/4"441 1/4
    		1 1/2
    		1 1/4
    		1 1/4
    		1/4"-20
    		801/4"103006T7400000103006T8200000
    1 7/8"481 1/2
    		—1 1/2
    		1 1/2
    		1/4"-20
    		805/16"103006T1800000103006T2700000
    2 3/8"602
    		—2
    		2
    		5/16"-18
    		1005/16"103006T7500000103006T8300000
    2 7/8"732 1/2
    		2 1/2
    		2 1/2
    		2 1/2
    		1/4"-20
    		1205/16"103006T1900000103006T2800000
    3 1/2"893
    		3
    		3
    		3
    		5/16"-18
    		1605/16"53006T760000053006T8400000
    4"1023 1/2
    		3 1/23 1/23 1/25/16"-18
    		2005/16"53006T20000053006T3100000
    4 1/2"1144
    		4
    		4
    		4
    		1/2"-13
    		2301/2"23006T770000023006T8500000
     
    304 Stainless Steel
    13/16"211/2
    		1/2
    		1/2
    		1/2
    		1/4"-20
    		501/4"13006T86000013006T510000
    1 1/16"273/4
    		—3/4
    		3/4
    		1/4"-20
    		501/4"13006T87000013006T520000
    1 5/16"331
    		—1
    		1
    		1/4"-20
    		601/4"13006T88000013006T530000
    1 1/2"38—1 1/4
    		——1/4"-20
    		701/4"13006T313000013006T3140000
    1 3/4"441 1/4
    		1 1/2
    		1 1/4
    		1 1/4
    		1/4"-20
    		801/4"13006T89000013006T50000
    1 7/8"481 1/2
    		—1 1/2
    		1 1/2
    		1/4"-20
    		805/16"13006T32000013006T680000
    2 3/8"602
    		—2
    		2
    		5/16"-18
    		1005/16"13006T91000013006T940000
    2 7/8"732 1/2
    		2 1/2
    		2 1/2
    		2 1/2
    		1/4"-20
    		1205/16"13006T33000013006T6900000
    3 1/2"893
    		3
    		3
    		3
    		5/16"-18
    		1605/16"13006T92000013006T9500000
    4"1023 1/2
    		3 1/23 1/23 1/25/16"-18
    		2005/16"13006T480000013006T700000
    4 1/2"1144
    		4
    		4
    		4
    		1/2"-13
    		2301/2"13006T930000013006T9600000
     
    316 Stainless Steel
    13/16"211/2
    		1/2
    		1/2
    		1/2
    		1/4"-20
    		501/4"13006T421000013006T4110000
    1 1/16"273/4
    		3/4
    		3/4
    		3/4
    		1/4"-20
    		501/4"13006T422000013006T4120000
    1 5/16"331
    		1
    		1
    		1
    		1/4"-20
    		601/4"13006T423000013006T4130000
    1 11/16"431 1/4
    		1 1/4
    		1 1/4
    		1 1/4
    		1/4"-20
    		701/4"13006T424000013006T4140000
    1 7/8"481 1/2
    		1 1/2
    		1 1/2
    		1 1/2
    		1/4"-20
    		805/16"13006T425000013006T4150000
    2 3/8"602
    		2
    		2
    		2
    		1/4"-20
    		1005/16"13006T426000013006T4160000
    2 7/8"732 1/2
    		2 1/2
    		2 1/2
    		2 1/2
    		5/16"-18
    		1203/8"13006T427000013006T41700000
    3 1/2"893
    		3
    		3
    		3
    		5/16"-18
    		1603/8"13006T4280000013006T41800000
    4 1/2"1144
    		4
    		4
    		4
    		5/16"-18
    		2303/8"13006T4290000013006T41900000
     
    Bottom Load with Snap Closure
     
    Steel
    11/16"173/8
    		3/8
    		3/8
    		3/8
    		1/4"-20
    		201/4"103006T2160000————0
    1 1/16"271/2, 3/4
    		1/2, 3/4
    		1/2, 3/4
    		1/2, 3/4
    		1/4"-20
    		201/4"103006T2140000————0
    1 5/16"331
    		1
    		1
    		1
    		1/4"-20
    		201/4"103006T21100000————0
    1 1/2"381 1/4
    		1 1/4
    		1 1/4
    		1 1/4
    		1/4"-20
    		201/4"103006T21300000————0
    1 3/4"441 1/2
    		1 1/2
    		1 1/2
    		1 1/2
    		1/4"-20
    		201/4"103006T21200000————0
    2 3/16"562
    		2
    		2
    		2
    		1/4"-20
    		201/4"103006T21500000————0
     
    Accessories for Pipe Hangers
    Eye Nuts for Top Load Hangers
    Image of Product. Front orientation. Eye Nuts.
    Suspend pipe hangers overhead by twisting threaded rod (not included) through the eye nut.
    For Thread
    Size
    Threaded
    Hole Dp.
    Wt. Cap.,
    lb.
    Eye
    Dia.
    Ctr.
    Ht.
    Wd.
    Ht.
    Threaded Rod
    Included
    Fasteners
    Req.
    Each
    Iron
    1/4"-20
    		3/8"2251/4"1"7/8"1 3/8"NoNo9436T02900000
     
    Pipe Hanger Straps for Top Load Hangers
    Image of Product. Front orientation. Pipe Hanger Straps.
    Cut as much strap as you need. Straps are perforated with mounting holes, so you don't need to drill into them. These semi-flexible straps can be slightly bent to adjust during installation.
    Mounting
    Hole
    Ga.
    Lg.,
    ft.
    Wd.
    Thk.
    Ctr.-to-Ctr.
    Dia.
    Each
    Steel
    1251 1/4"7/64"5/8"3/8"9600T51000000
     
    Zinc-Plated Steel
    1653/4"1/16"5/8"9/32"9600T3600000
    1657/8"1/16"5/8"9/32"9600T3700000
    1451"5/64"5/8"9/32"9600T3800000
     

    Snug-Fit Clamp Pipe Hangers

    Image of Product. Front orientation. Pipe Hangers. Snug-Fit Clamp Pipe Hangers.
    Place pipe between the hanger halves and adjust the side bolts for a tighter fit than other pipe hangers. When closed, the split ring forms a complete circle around the pipe for 360° support with no gaps. Mount by twisting a threaded rod through the threaded hole.
    Zinc-Plated Iron—Mildly corrosion resistant, so these hangers are ideal for dry or slightly humid environments.
    Epoxy-Coated Iron—Resist corrosion better than zinc-plated iron.
    304 Stainless Steel—Withstand mild chemicals and solvents and won't rust in wet environments.
    ID
    For Conduit
    Trade Size
    Inch
    Metric,
    mm
    For Pipe
    Size
    For Copper
    Tube Size
    EMT
    IMC
    Rigid
    For Thread
    Size
    Wt. Cap.,
    lb.
    Mounting
    Hole Dia.
    Each
    Iron
    11/16"173/8
    		1/2
    		——3/8
    		3/8"-16
    		1803/8"3023T6700000
    7/8"221/2
    		3/4
    		3/4
    		1/2
    		1/2
    		3/8"-16
    		1803/8"3023T680000
    1 1/16"273/4
    		——3/4
    		3/4
    		3/8"-16
    		1803/8"3023T690000
    1 5/16"331
    		——1
    		1
    		3/8"-16
    		1803/8"3023T710000
    1 11/16"431 1/4
    		1 1/2
    		—1 1/4
    		1 1/4
    		3/8"-16
    		1803/8"3023T720000
    1 7/8"481 1/2
    		——1 1/2
    		1 1/2
    		3/8"-16
    		1803/8"3023T730000
    2 3/8"602
    		——2
    		2
    		3/8"-16
    		1803/8"3023T7400000
    2 7/8"732 1/2
    		—2 1/2
    		2 1/2
    		2 1/2
    		1/2"-13
    		3001/2"3023T1500000
    3 1/2"893
    		—3
    		3
    		3
    		1/2"-13
    		3001/2"3023T1600000
    4 1/2"1144
    		—4
    		4
    		4
    		1/2"-13
    		3001/2"3023T4800000
     
    Zinc-Plated Iron
    11/16"173/8
    		1/2
    		——3/8
    		3/8"-16
    		1803/8"3023T220000
    7/8"221/2
    		3/4
    		3/4
    		1/2
    		1/2
    		3/8"-16
    		1803/8"3023T230000
    1 1/16"273/4
    		——3/4
    		3/4
    		3/8"-16
    		1803/8"3023T240000
    1 5/16"331
    		——1
    		1
    		3/8"-16
    		1803/8"3023T250000
    1 11/16"431 1/4
    		1 1/2
    		—1 1/4
    		1 1/4
    		3/8"-16
    		1803/8"3023T260000
    1 7/8"481 1/2
    		——1 1/2
    		1 1/2
    		3/8"-16
    		1803/8"3023T270000
    2 3/8"602
    		——2
    		2
    		3/8"-16
    		1803/8"3023T2800000
    2 7/8"732 1/2
    		—2 1/2
    		2 1/2
    		2 1/2
    		1/2"-13
    		3001/2"3023T2900000
    3 1/2"893
    		—3
    		3
    		3
    		1/2"-13
    		3001/2"3023T3100000
    4 1/2"1144
    		—4
    		4
    		4
    		1/2"-13
    		3001/2"3023T3200000
     
    Epoxy-Coated Iron
    1/2"12—3/8
    		———3/8"-16
    		1803/8"3023T330000
    5/8"15—1/2
    		———3/8"-16
    		1803/8"3023T340000
    7/8"22—3/4
    		———3/8"-16
    		1803/8"3023T510000
    1 1/8"28—1
    		———3/8"-16
    		1803/8"3023T520000
    1 3/8"34—1 1/4
    		———3/8"-16
    		1803/8"3023T530000
    1 5/8"41—1 1/2
    		—1 1/4
    		—3/8"-16
    		1803/8"3023T5400000
    2 1/8"53—2
    		———3/8"-16
    		1803/8"3023T5500000
     
    304 Stainless Steel
    11/16"173/8
    		1/2
    		——3/8
    		3/8"-16
    		1803/8"3023T8100000
    7/8"221/2
    		3/4
    		3/4
    		1/2
    		1/2
    		3/8"-16
    		1803/8"3023T8200000
    1 1/16"273/4
    		——3/4
    		3/4
    		3/8"-16
    		1803/8"3023T8300000
    1 5/16"331
    		——1
    		1
    		3/8"-16
    		1803/8"3023T8400000
    1 11/16"431 1/4
    		1 1/2
    		—1 1/4
    		1 1/4
    		3/8"-16
    		1803/8"3023T8500000
    1 7/8"481 1/2
    		——1 1/2
    		1 1/2
    		3/8"-16
    		1803/8"3023T8600000
    2 3/8"602
    		——2
    		2
    		3/8"-16
    		1803/8"3023T8700000
    2 7/8"732 1/2
    		—2 1/2
    		2 1/2
    		2 1/2
    		1/2"-13
    		3001/2"3023T88000000
    3 1/2"893
    		—3
    		3
    		3
    		1/2"-13
    		3001/2"3023T89000000
    4 1/2"1144
    		—4
    		4
    		4
    		1/2"-13
    		3001/2"3023T91000000
     

    Vibration-Damping Clamp Pipe Hangers

    The rubber cushion on these pipe hangers fits tightly around lines to reduce disruptive noise and damaging vibrations. It also protects lines from sharp edges on the hanger and prevents corrosion from metal-to-metal contact. These pipe hangers are often installed in hydraulic systems. Mount by twisting the nut onto a threaded rod.
    Hinged—Combine the flexibility of a two-piece clamp with the simplicity of a one-piece clamp. These are easy to assemble, reposition, and take apart.
    Two Piece—Detach the two halves and place them around pipe to install without accessing the end of your line.
    Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture, but won't stand up to chemicals.
    304 Stainless Steel—Withstand mild chemicals and solvents and won't rust in wet environments.
    Pipe Hangers
    Replacement
    Cushions
    ID
    For Conduit
    Trade Size
    Inch
    Metric,
    mm
    For Pipe
    Size
    For Copper
    Tube Size
    EMT
    IMC
    Rigid
    For Thread
    Size
    Wt. Cap.,
    lb.
    Cushion
    Material
    Each
    Each
    Hinged
    Image of Product. Front orientation. Pipe Hangers. Vibration-Damping Clamp Pipe Hangers, Hinged.
     
    Zinc-Plated Steel
    9/16"141/4
    		3/8
    		———3/8"-16
    		180EPDM/SBR2615T1100000———0
    11/16"173/8
    		1/2
    		——3/8
    		3/8"-16
    		180EPDM/SBR2615T120000———0
    13/16"20—5/8
    		———3/8"-16
    		180EPDM/SBR2615T310000———0
    7/8"221/2
    		3/4
    		—1/2
    		1/2
    		3/8"-16
    		180EPDM/SBR2615T130000———0
    1 1/16"273/4
    		1
    		—3/4
    		3/4
    		3/8"-16
    		180EPDM/SBR2615T140000———0
    1 3/8"351
    		1 1/4
    		—1
    		1
    		3/8"-16
    		180EPDM/SBR2615T150000———0
    1 11/16"431 1/4
    		1 1/2
    		—1 1/4
    		1 1/4
    		3/8"-16
    		180EPDM/SBR2615T160000———0
    1 15/16"491 1/2
    		——1 1/2
    		1 1/2
    		3/8"-16
    		180EPDM/SBR2615T170000———0
    2 3/16"56—2
    		2
    		——3/8"-16
    		180EPDM/SBR2615T180000———0
    2 3/8"602
    		——2
    		2
    		3/8"-16
    		180EPDM/SBR2615T190000———0
    2 5/8"67—2 1/2
    		———3/8"-16
    		300EPDM/SBR2615T210000———0
    2 7/8"732 1/2
    		—2 1/2
    		2 1/2
    		2 1/2
    		3/8"-16
    		300EPDM/SBR2615T220000———0
    3 1/8"79—3
    		———3/8"-16
    		300EPDM/SBR2615T230000———0
    3 1/2"893
    		—3
    		3
    		3
    		3/8"-16
    		300EPDM/SBR2615T240000———0
    3 15/16"100—3 1/2
    		———3/8"-16
    		300EPDM/SBR2615T320000———0
    4 1/8"1053 1/2
    		4
    		3 1/2—3 1/23/8"-16
    		300EPDM/SBR2615T250000———0
    4 1/2"1144
    		—4
    		4
    		4
    		3/8"-16
    		300EPDM/SBR2615T260000———0
     
    Two Piece
    Image of Product. Front orientation. Pipe Hangers. Vibration-Damping Clamp Pipe Hangers, Two Piece.
     
    304 Stainless Steel
    3/4"193/8
    		5/8
    		1/2
    		—3/8
    		3/8"-16
    		Not RatedBuna-N
    		2218T51000002218T77700000
    1"25—3/4
    		3/4
    		——3/8"-16
    		Not RatedBuna-N
    		2218T52000002218T7760000
    1 1/2"38—1 1/4
    		1 1/4
    		——3/8"-16
    		Not RatedBuna-N
    		2218T53000002218T7790000
    2"511 1/2
    		——1 1/2
    		1 1/2
    		3/8"-16
    		Not RatedBuna-N
    		2218T54000002218T7780000
    2 1/2"642
    		———2
    		3/8"-16
    		Not RatedBuna-N
    		2218T55000002218T7780000
    3"762 1/2
    		—2 1/2
    		—2 1/2
    		3/8"-16
    		Not RatedBuna-N
    		2218T56000002218T7780000
    4"1023 1/2
    		—3 1/23 1/23 1/23/8"-16
    		Not RatedBuna-N
    		2218T57000002218T7780000
    6"152—————3/8"-16
    		Not RatedBuna-N
    		2218T58000002218T7790000
    8"203—————3/8"-16
    		Not RatedBuna-N
    		2218T59000002218T7790000
     

    Adjustable Clamp Pipe Hangers

    Image of Product. Front orientation. Contains Annotated. Pipe Hangers. Adjustable Clamp Pipe Hangers.
    Fit a range of line sizes without any cutting, then easily adjust after they're installed. Feed the wire rope through the hanger until it's the size you need. The hanger clicks as you pull the wire so you know it's locked in place, just like a cable tie. Press the quick-release key to loosen the hanger, such as to add insulation, or to remove the hanger and install it elsewhere.
    ID
    Inch
    Metric,
    mm
    For Pipe Size
    For Thread
    Size
    Wt. Cap.,
    lb.
    Cushion
    Material
    Each
    Zinc
    7/8" to 6 5/8"22 to 1681/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 3 1/2, 4, 5, 6
    		3/8"-16
    		170EPDM
    		6326N2100000
     

    Sanitary Clamp Pipe Hangers

    Image of Product. Front orientation. Pipe Hangers. Sanitary Clamp Pipe Hangers.
    Rounded edges, polished surfaces, and concealed threads limit bacteria growth on these hangers. Use them to hold pipe in environments with frequent washdowns, such as food and pharmaceutical plants. They resist corrosion in wet environments and stand up to frequent washdowns with harsh cleaners and sanitizers. The FDA compliant cushion is safe for direct contact with food. It fits tightly around lines to damp vibrations that cause disruptive noises or damage to equipment. It also prevents corrosion caused by metal-to-metal contact. Mount these pipe hangers by twisting a threaded rod through the threaded hole on top.
    304 Stainless Steel—Often used with utility and water piping, these withstand mild chemicals and solvents and won't rust in wet environments.
    316 Stainless Steel—Our most corrosion-resistant metal pipe hangers, use these around steam sterilization, aggressive sanitizers, and chemical processing.
    Silicone Rubber Cushion—Withstand steam cleaning, ozone, sunlight, and oxidation.
    PTFE Cushion—Withstand most chemicals and accommodate thermal expansion.
    ID
    For Conduit
    Trade Size
    Inch
    Metric,
    mm
    For Pipe
    Size
    For Copper
    Tube Size
    EMT
    IMC
    Rigid
    For Thread
    Size
    Wt. Cap.,
    lb.
    Food Industry Std.
    Each
    304 Stainless Steel
     
    Silicone Rubber Cushion
    1/4"6—————3/8"-16
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N11000000
    3/8"10—1/4
    		———3/8"-16
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N1200000
    1/2"13—3/8
    		———3/8"-16
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N1300000
    9/16"141/4
    		————3/8"-16
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N1400000
    5/8"16—1/2
    		———3/8"-16
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N1500000
    11/16"173/8
    		————3/8"-16
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N1600000
    3/4"195/8
    		————3/8"-16
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N1700000
    13/16"211/2
    		————3/8"-16
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N1800000
    7/8"22—3/4
    		———3/8"-16
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N1900000
    1"25—————3/8"-16
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N2100000
    1 1/16"273/4
    		————3/8"-16
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N2200000
    1 1/8"29—1
    		———3/8"-16
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N2300000
    1 1/4"32—————3/8"-16
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N2400000
    1 5/16"341
    		————3/8"-16
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N2500000
    1 3/8"35—1 1/4
    		———3/8"-16
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N2600000
    1 1/2"38—————3/8"-16
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N2700000
    1 5/8"41—1 1/2
    		———3/8"-16
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N2800000
    1 11/16"421 1/4
    		————3/8"-16
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N2900000
    1 7/8"481 1/2
    		————3/8"-16
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N3100000
    2"51—————3/8"-16
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N3200000
    2 1/8"54—2
    		———3/8"-16
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N3300000
    2 3/8"612
    		————1/2"-13
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N3400000
    2 3/8"612
    		————1/2"-13
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N38000000
    2 1/2"64—————1/2"-13
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N3500000
    2 1/2"64—————1/2"-13
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N39000000
    2 5/8"67—2 1/2
    		———1/2"-13
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N3600000
    2 5/8"67—2 1/2
    		———1/2"-13
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N41000000
    2 7/8"732 1/2
    		————1/2"-13
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N3700000
    2 7/8"732 1/2
    		————1/2"-13
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N42000000
    3"76—————1/2"-13
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N43000000
    3 1/8"79—3
    		———1/2"-13
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N44000000
    3 1/2"893
    		————1/2"-13
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N45000000
    4"102—————1/2"-13
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N46000000
    4 1/8"105—4
    		———1/2"-13
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N47000000
    4 1/2"1144
    		————1/2"-13
    		Not RatedFDA Compliant 21 CFR 177.2600
    		8028N48000000
     
    316 Stainless Steel
     
    Silicone Rubber Cushion
    1/4"6—————3/8"-16
    		400FDA Compliant 21 CFR 177.2600
    		8831T3100000
    3/8"10—1/4
    		———3/8"-16
    		400FDA Compliant 21 CFR 177.2600
    		8831T3200000
    1/2"131/8
    		3/8
    		———3/8"-16
    		400FDA Compliant 21 CFR 177.2600
    		8831T3300000
    3/4"193/8
    		5/8
    		1/2
    		—3/8
    		3/8"-16
    		400FDA Compliant 21 CFR 177.2600
    		8831T3400000
    1"25—3/4
    		3/4
    		——3/8"-16
    		400FDA Compliant 21 CFR 177.2600
    		8831T3500000
    1 1/4"32—1
    		1
    		——3/8"-16
    		400FDA Compliant 21 CFR 177.2600
    		8831T3600000
    1 1/2"38—1 1/4
    		1 1/4
    		——3/8"-16
    		600FDA Compliant 21 CFR 177.2600
    		8831T3700000
    2"511 1/2
    		——1 1/2
    		1 1/2
    		3/8"-16
    		600FDA Compliant 21 CFR 177.2600
    		8831T3800000
    2 1/2"642
    		———2
    		1/2"-13
    		600FDA Compliant 21 CFR 177.2600
    		8831T39000000
    3"762 1/2
    		—2 1/2
    		—2 1/2
    		1/2"-13
    		600FDA Compliant 21 CFR 177.2600
    		8831T41000000
    4"1023 1/2
    		—3 1/23 1/23 1/25/8"-11
    		1,000FDA Compliant 21 CFR 177.2600
    		8831T42000000
    6"152—————3/4"-10
    		2,000FDA Compliant 21 CFR 177.2600
    		8831T43000000
     
    PTFE Cushion
    1/2"131/8
    		3/8
    		———3/8"-16
    		400FDA Compliant 21 CFR 177.2600
    		8831T4600000
    3/4"193/8
    		5/8
    		1/2
    		—3/8
    		3/8"-16
    		400FDA Compliant 21 CFR 177.2600
    		8831T4700000
    1"25—3/4
    		3/4
    		——3/8"-16
    		400FDA Compliant 21 CFR 177.2600
    		8831T4800000
    1 9/16"40—1 1/4
    		1 1/4
    		——3/8"-16
    		600FDA Compliant 21 CFR 177.2600
    		8831T62000000
    2"511 1/2
    		——1 1/2
    		1 1/2
    		3/8"-16
    		600FDA Compliant 21 CFR 177.2600
    		8831T6300000
    2 1/2"642
    		———2
    		1/2"-13
    		600FDA Compliant 21 CFR 177.2600
    		8831T64000000
    3"762 1/2
    		—2 1/2
    		—2 1/2
    		1/2"-13
    		600FDA Compliant 21 CFR 177.2600
    		8831T65000000
    4"1023 1/2
    		—3 1/23 1/23 1/25/8"-11
    		1,000FDA Compliant 21 CFR 177.2600
    		8831T66000000
     

    Push-to-Close Clamp Pipe Hangers

    Image of Product. Front orientation. Pipe Hangers. Push-to-Close Clamp Pipe Hangers.
    Lock pipe, tube, and conduit into place in a single step. Press material into the open hanger, then close by hand—no tools or adjustments needed. Mount with a fastener through the unthreaded hole.
    Nylon—Lightweight, nonconductive, and naturally rust resistant. The plastic won't cause corrosion on metal parts. It does swell and weaken when exposed to moisture, so these are best for dry environments.
    HDPE—FDA compliant for direct contact with food. These hangers stand up to chemicals such as strong acids, bases, and solvents without swelling or losing strength. They also keep their shape in washdown environments.
    Strut Channel Adapters—Attach to hangers to mount them on strut channel.
    Threaded Rod Adapters—Attach to hangers to mount them on threaded rod.
    Pipe Hangers
    Strut
    Channel Adapters
    Threaded Rod
    Adapters
    ID
    Mounting
    Hole
    Inch
    Metric,
    mm
    For Pipe
    Size
    For Copper
    Tube Size
    Wt. Cap.,
    lb.
    Dia.
    Lg.
    Wd.
    Food Industry Std.
    Pkg.
    Qty.
    Pkg.
    Pkg.
    Qty.
    Pkg.
    Pkg.
    Qty.
    Pkg.
    Wall Mount
     
    Polycarbonate Plastic
    5/16" to 3/8"8 to 101/4
    		1/4
    		301/8"———130075T7300000————0————0
    3/8" to 7/16"10 to 121/4
    		1/4
    		301/8"———130075T740000————0————0
     
    Strut-Channel/Threaded-Rod/Wall Mount
     
    Nylon Plastic
    7/16" to 1/2"12 to 141/8, 1/4
    		1/4, 3/8
    		140—5/16"3/16"—1030075T1120000130075T29000001030075T2100000
    9/16" to 5/8"15 to 171/4, 3/8
    		3/8, 1/2
    		150—5/16"3/16"—1030075T1130000130075T2900001030075T210000
    5/8" to 3/4"17 to 203/8
    		1/2, 5/8
    		160—5/16"3/16"—530075T1140000130075T2900001030075T210000
    3/4" to 13/16"20 to 221/2
    		5/8, 3/4
    		180—5/16"3/16"—530075T1150000130075T2900001030075T210000
    13/16" to 7/8"22 to 231/2
    		3/4
    		200—5/16"3/16"—530075T1160000130075T2900001030075T210000
    15/16" to 1 1/16"25 to 283/4
    		—230—5/16"3/16"—530075T1170000130075T2900001030075T210000
    1 1/16" to 1 3/16"28 to 31—1
    		240—5/16"3/16"—530075T1180000130075T2900001030075T210000
    1 1/4" to 1 3/8"32 to 361
    		1 1/4
    		2403/8"———130075T1190000130075T290000130075T240000
    1 3/8" to 1 1/2"36 to 401
    		1 1/4
    		2403/8"———130075T2110000130075T290000130075T240000
    1 9/16" to 1 11/16"40 to 431 1/4
    		1 1/2
    		2403/8"———130075T2120000130075T290000130075T240000
    1 13/16" to 2"47 to 511 1/2
    		—2403/8"———130075T2130000130075T290000130075T240000
    2" to 2 3/16"51 to 56—2
    		3003/8"———130075T2140000130075T290000130075T240000
    2 5/16" to 2 1/2"59 to 642
    		2
    		3603/8"———130075T2150000130075T290000130075T240000
    2 3/4" to 3 1/8"71 to 802 1/2
    		3
    		4601/2"———130075T2160000130075T310000130075T250000
    3 1/8" to 3 1/2"80 to 903
    		3
    		8101/2"———130075T21700000130075T310000130075T250000
    4 7/16" to 5"113 to 1274
    		—1,3001/2"———130075T21800000130075T310000130075T250000
     
    HDPE Plastic
    7/16" to 1/2"12 to 141/8, 1/4
    		1/4, 3/8
    		80—5/16"3/16"FDA Compliant 21 CFR 177.1520
    		1030075T41100000130075T2900001030075T210000
    9/16" to 5/8"15 to 171/4, 3/8
    		3/8, 1/2
    		90—5/16"3/16"FDA Compliant 21 CFR 177.1520
    		1030075T41200000130075T2900001030075T210000
    5/8" to 3/4"17 to 203/8
    		1/2, 5/8
    		100—5/16"3/16"FDA Compliant 21 CFR 177.1520
    		530075T4130000130075T2900001030075T210000
    3/4" to 13/16"20 to 221/2
    		5/8, 3/4
    		100—5/16"3/16"FDA Compliant 21 CFR 177.1520
    		530075T4140000130075T2900001030075T210000
    13/16" to 7/8"22 to 231/2
    		3/4
    		130—5/16"3/16"FDA Compliant 21 CFR 177.1520
    		530075T4150000130075T2900001030075T210000
    15/16" to 1 1/16"25 to 283/4
    		—130—5/16"3/16"FDA Compliant 21 CFR 177.1520
    		530075T4160000130075T2900001030075T210000
    1 1/16" to 1 3/16"28 to 31—1
    		140—5/16"3/16"FDA Compliant 21 CFR 177.1520
    		530075T41700000130075T2900001030075T210000
    1 1/4" to 1 3/8"32 to 361
    		1 1/4
    		1603/8"——FDA Compliant 21 CFR 177.1520
    		130075T4180000130075T290000130075T240000
    1 3/8" to 1 1/2"36 to 401
    		1 1/4
    		1603/8"——FDA Compliant 21 CFR 177.1520
    		130075T4190000130075T290000130075T240000
    1 9/16" to 1 11/16"40 to 431 1/4
    		1 1/2
    		1803/8"——FDA Compliant 21 CFR 177.1520
    		130075T4210000130075T290000130075T240000
    1 13/16" to 2"47 to 511 1/2
    		—1203/8"——FDA Compliant 21 CFR 177.1520
    		130075T4220000130075T290000130075T240000
    2" to 2 3/16"51 to 56—2
    		1903/8"——FDA Compliant 21 CFR 177.1520
    		130075T4230000130075T290000130075T240000
    2 5/16" to 2 1/2"59 to 642
    		2
    		1503/8"——FDA Compliant 21 CFR 177.1520
    		130075T4240000130075T290000130075T240000
    2 3/4" to 3 1/8"71 to 802 1/2
    		3
    		6001/2"——FDA Compliant 21 CFR 177.1520
    		130075T4250000130075T310000130075T250000
    3 1/8" to 3 1/2"80 to 903
    		3
    		6901/2"——FDA Compliant 21 CFR 177.1520
    		130075T42600000130075T310000130075T250000
    4 7/16" to 5"113 to 1274
    		—1,1401/2"——FDA Compliant 21 CFR 177.1520
    		130075T42700000130075T310000130075T250000
     
    Spacers for Nylon Plastic Hangers
    Image of Product. Front orientation. Spacers for Pipe Hangers.
    Create consistent space between lines and mounting surfaces to provide extra clearance for insulation, wiring, or other components. You can also align multiple pipes at the same level when mounted on uneven surfaces.
    Lg.
    Wd.
    Ht.
    Temp.,
    ° F
    Pkg.
    Qty.
    Pkg.
    Nylon Plastic
    1 3/16"13/16"1 3/4"20 to 180530075T9100000
    2"1 3/16"3 3/8"20 to 180130075T920000
     

    Weld-Mount Vibration-Damping Clamp Pipe Hangers

    Image of Product. Front orientation. Pipe Hangers. Weld-Mount Vibration-Damping Clamp Pipe Hangers.
    Weld these hangers to a rod or flat surface for a strong, secure connection, even in places with heavy vibration. The cushions damp vibration that could damage equipment or cause disruptive noise, such as in hydraulic systems.
    304 Stainless Steel—Withstand mild chemicals and solvents and won't rust in wet environments.
    Buna-N Cushion—Cushions tightly grip material and won't swell, weaken, or lose elasticity when exposed to oil.
    Fluoroelastomer Cushion—Grip lines tightly and stand up to chemicals such as fuels, oils, and solvents. More durable than Buna-N.
    Pipe Hangers
    Replacement
    Cushions
    ID
    For Conduit
    Trade Size
    Inch
    Metric,
    mm
    For Pipe
    Size
    For Copper
    Tube Size
    EMT
    IMC
    Rigid
    Wt. Cap.,
    lb.
    Each
    Each
    304 Stainless Steel
     
    Buna-N Cushion
    1/2"131/8
    		3/8
    		———Not Rated2218T220000002218T7800000
    3/4"193/8
    		5/8
    		1/2
    		—3/8
    		7802218T1000002218T7770000
    1"25—3/4
    		3/4
    		——7802218T2000002218T7760000
    1 3/8"351
    		1 1/4
    		—1
    		1
    		Not Rated2218T23000002218T7780000
    1 1/2"38—1 1/4
    		1 1/4
    		——7802218T3000002218T7790000
    1 7/8"481 1/2
    		——1 1/2
    		1 1/2
    		Not Rated2218T24000002218T7780000
    2"511 1/2
    		——1 1/2
    		1 1/2
    		7802218T4000002218T7780000
    2 3/8"602
    		——2
    		2
    		Not Rated2218T25000002218T7780000
    2 1/2"642
    		———2
    		7802218T5000002218T7780000
    2 7/8"732 1/2
    		—2 1/2
    		2 1/2
    		2 1/2
    		Not Rated2218T26000002218T7780000
    3"762 1/2
    		—2 1/2
    		—2 1/2
    		7802218T6000002218T7780000
    3 1/2"893
    		—3
    		3
    		3
    		Not Rated2218T27000002218T7790000
    4"1023 1/2
    		—3 1/23 1/23 1/27802218T7000002218T7790000
    4 1/2"1144
    		—4
    		4
    		4
    		Not Rated2218T28000002218T7790000
    5"127—5———Not Rated2218T73000002218T7790000
    6"152—————7802218T71000002218T7790000
    6 5/8"1686
    		———6Not Rated2218T2900000———0
    8"203—————7802218T72000002218T7790000
    10"254—————Not Rated2218T7280000002218T7790000
     
    Fluoroelastomer Cushion
    3/4"193/8
    		5/8
    		1/2
    		—3/8
    		Not Rated2218T745000002218T78100000
    1"25—3/4
    		3/4
    		——Not Rated2218T746000002218T78400000
    1 1/2"38—1 1/4
    		1 1/4
    		——Not Rated2218T747000002218T7830000
    2"511 1/2
    		——1 1/2
    		1 1/2
    		Not Rated2218T748000002218T78200000
    2 1/2"642
    		———2
    		Not Rated2218T749000002218T78200000
    3"762 1/2
    		—2 1/2
    		—2 1/2
    		Not Rated2218T75000002218T78200000
    4"1023 1/2
    		—3 1/23 1/23 1/2Not Rated2218T751000002218T7830000
    6"152—————Not Rated2218T752000002218T7830000
     

    Loop Pipe Hangers

    Image of Product. Front orientation. Contains Annotated. Pipe Hangers. Loop Pipe Hangers.
    Secure pipe while still allowing for slight movement to reduce stress on joints. To suspend these pipe hangers from the ceiling, twist a threaded rod into the unthreaded hole and secure with a pair of nuts (not included). Also known as teardrop hangers.
    304 Stainless Steel—Withstand mild chemicals and solvents and won't rust in wet environments.
    316 Stainless Steel—Our most corrosion-resistant metal pipe hangers. These won’t degrade when exposed to harsh weather, salt water, and most chemicals.
    ID
    For Conduit
    Trade Size
    Inch
    Metric,
    mm
    For Pipe
    Size
    For Copper
    Tube Size
    EMT
    IMC
    Rigid
    For Thread
    Size
    Wt. Cap.,
    lb.
    Mounting
    Hole Dia.
    No. of
    Nuts Req.
    Each
    304 Stainless Steel
    13/16"211/2
    		5/8
    		1/2
    		1/2
    		1/2
    		3/8"-16
    		6107/16"23273T51000000
    1 1/16"273/4
    		——3/4
    		3/4
    		3/8"-16
    		6107/16"23273T5200000
    1 5/16"331
    		——1
    		1
    		3/8"-16
    		6107/16"23273T5300000
    1 7/8"481 1/2
    		——1 1/2
    		1 1/2
    		3/8"-16
    		6107/16"23273T5400000
    2 3/8"602
    		——2
    		2
    		3/8"-16
    		6107/16"23273T5500000
    3 1/2"893
    		—3
    		3
    		3
    		1/2"-13
    		9709/16"23273T5700000
    4 1/2"1144
    		—4
    		4
    		4
    		1/2"-13
    		9709/16"23273T5800000
    6 5/8"1686
    		———63/4"-10
    		1,25013/16"23273T5900000
     
    316 Stainless Steel
    7/8"221/2
    		3/4
    		—1/2
    		1/2
    		3/8"-16
    		6107/16"23064T610000
    1"25—3/4
    		3/4
    		——3/8"-16
    		6107/16"23064T620000
    1 3/8"351
    		1 1/4
    		—1
    		1
    		3/8"-16
    		6107/16"23064T630000
    1 5/8"41—1 1/2
    		1 1/4
    		1 1/4
    		—3/8"-16
    		6107/16"23064T640000
    1 15/16"491 1/2
    		——1 1/2
    		1 1/2
    		3/8"-16
    		6107/16"23064T6500000
    2 3/8"602
    		——2
    		2
    		3/8"-16
    		6107/16"23064T6600000
    2 7/8"732 1/2
    		—2 1/2
    		2 1/2
    		2 1/2
    		3/8"-16
    		9709/16"23064T6700000
    3 1/2"893
    		—3
    		3
    		3
    		3/8"-16
    		9709/16"23064T6800000
    4"1023 1/2
    		—3 1/23 1/23 1/21/2"-13
    		9709/16"23064T6900000
    4 1/2"1144
    		—4
    		4
    		4
    		1/2"-13
    		1,25011/16"23064T7100000
     
    Pipe Cradles
    Cradles provide additional support and prevent tears in insulation when routing insulated pipe through loop hangers. Also known as pipe shields.
    Adhesive Mount—Attach the cradle to the pipe's insulation with an adhesive strip.
    Clip-On Mount—Clip the tabs of the cradle directly onto the bottom of a loop hanger.
    ID
    Inch
    Metric,
    mm
    Lg.
    Wd.
    Ht.
    Thk.
    Each
    Adhesive Mount
    Image of Product. Front orientation. Pipe Cradles. Adhesive Mount.
     
    Galvanized Steel
    1 7/8"4812"2"1"1/32"9164T1100000
    2 3/8"6012"2 1/2"1 1/4"1/32"9164T130000
    2 7/8"7312"3"1 1/2"1/32"9164T150000
    3 1/2"8912"3 1/2"1 3/4"1/32"9164T170000
    4"10212"4"2"1/32"9164T210000
    4 1/2"11412"4 1/2"2 1/4"1/32"9164T230000
     
    Clip-On Mount
    Image of Product. Front orientation. Pipe Cradles. Clip-On Mount.
     
    Zinc-Plated Steel
    1 7/8"4812"2"1"3/64"2620N1100000
    2 3/8"6012"2 1/2"1 1/4"3/64"2620N1200000
    2 7/8"7312"3"1 1/2"3/64"2620N1300000
    3 1/2"8912"3 5/8"1 13/16"3/64"2620N1400000
    4"10212"4 1/8"2 1/16"3/64"2620N1500000
    4 1/2"11412"4 5/8"2 5/16"3/64"2620N1600000
    6 5/8"16812"6 3/4"3 3/8"1/16"2620N1900000
     

    Weld-Mount Clamp Pipe Hangers

    Image of Product. Front orientation. Pipe Hangers. Weld-Mount Clamp Pipe Hangers.
    Weld these hangers to a rod or flat surface for a strong, secure connection. For lines that expand and contract due to changes in temperature or pressure, choose a hanger with a plastic cushion.
    Galvanized Steel—These clamps won't rust in wet and outdoor environments, but they'll corrode when exposed to salt water and chemicals.
    304 Stainless Steel—Withstand mild chemicals and solvents and won't rust in wet environments.
    ABS Cushion—Withstand impacts better than polypropylene and resist scratching and indentation.
    Polysulfone Cushion—Withstand higher temperatures than polypropylene and ABS plastic cushions, up to 325° F.
    Polypropylene Cushion—Resist water, most acids, alcohols, and salts. They're more flexible and less impact-resistant than polysulfone at high temperatures.
    Pipe Hangers
    Replacement
    Cushions
    ID
    For Conduit
    Trade Size
    Inch
    Metric,
    mm
    For Pipe
    Size
    For Copper
    Tube Size
    EMT
    IMC
    Rigid
    Wt. Cap.,
    lb.
    Each
    Each
    Galvanized Steel
    3 1/2"893
    		—3
    		3
    		3
    		3,3002218T721000000———0
    4 1/2"1144
    		—4
    		4
    		4
    		3,5002218T72200000———0
    5 9/16"1415
    		———53,5002218T72300000———0
    6 5/8"1686
    		———64,8002218T724000000———0
    8 5/8"2198
    		————4,8002218T725000000———0
    10 3/4"27310
    		————6,0002218T726000000———0
     
    304 Stainless Steel
     
    ABS Cushion
    1/2"131/8
    		3/8
    		———Not Rated2218T21000002218T76500000
    3/4"193/8
    		5/8
    		1/2
    		—3/8
    		Not Rated2218T74000002218T7660000
    1"25—3/4
    		3/4
    		——7802218T41000002218T7670000
    1 1/2"38—1 1/4
    		1 1/4
    		——7802218T42000002218T7680000
    2"511 1/2
    		——1 1/2
    		1 1/2
    		7802218T43000002218T7690000
    2 1/2"642
    		———2
    		7802218T44000002218T770000
    3"762 1/2
    		—2 1/2
    		—2 1/2
    		7802218T45000002218T7710000
    4"1023 1/2
    		—3 1/23 1/23 1/27802218T46000002218T7720000
    6"152—————7802218T47000002218T7740000
    8"203—————7802218T480000002218T77500000
     
    Polysulfone Cushion
    1"25—3/4
    		3/4
    		——Not Rated2218T733000002218T75800000
    1 1/2"38—1 1/4
    		1 1/4
    		——Not Rated2218T734000002218T75900000
    2"511 1/2
    		——1 1/2
    		1 1/2
    		Not Rated2218T735000002218T760000
    2 1/2"642
    		———2
    		Not Rated2218T736000002218T76100000
    3"762 1/2
    		—2 1/2
    		—2 1/2
    		Not Rated2218T737000002218T76200000
    4"1023 1/2
    		—3 1/23 1/23 1/2Not Rated2218T738000002218T76300000
     
    Polypropylene Cushion
    1 5/16"331
    		1 1/4
    		—1
    		1
    		Not Rated2218T31000002218T78600000
    1 7/8"481 1/2
    		——1 1/2
    		1 1/2
    		Not Rated2218T32000002218T78700000
    2 3/8"602
    		——2
    		2
    		Not Rated2218T33000002218T78800000
    2 7/8"732 1/2
    		—2 1/2
    		2 1/2
    		2 1/2
    		Not Rated2218T34000002218T78900000
    3 1/2"893
    		—3
    		3
    		3
    		Not Rated2218T35000002218T7900000
    4 1/2"1144
    		—4
    		4
    		4
    		Not Rated2218T36000002218T79100000
    6 5/8"1686
    		———6Not Rated2218T370000002218T792000000
     

    Side-Load Loop Pipe Hangers

    Image of Product. Front orientation. Contains Annotated. Pipe Hangers. Side-Load Loop Pipe Hangers.
    Remove the bolt to access and adjust lines without having to uninstall these hangers. Mount with a threaded rod and nut (not included). Use the side hole to mount these hangers to the wall instead of the ceiling.
    Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture, but won't stand up to chemicals.
    304 Stainless Steel—Withstand mild chemicals and solvents and won't rust in wet environments.
    ID
    For Conduit
    Trade Size
    Mounting
    Hole Dia.
    Inch
    Metric,
    mm
    For Pipe
    Size
    For Copper
    Tube Size
    EMT
    IMC
    Rigid
    For Thread
    Size
    Wt. Cap.,
    lb.
    Side
    Top
    No. of
    Nuts Req.
    Each
    Zinc-Plated Steel
    1 1/16"273/4
    		——3/4
    		3/4
    		3/8"-16
    		4007/16"3/8"13131T5200000
    1 5/16"331
    		——1
    		1
    		3/8"-16
    		4007/16"3/8"13131T530000
    1 11/16"431 1/4
    		1 1/2
    		—1 1/4
    		1 1/4
    		3/8"-16
    		4007/16"3/8"13131T540000
    1 7/8"481 1/2
    		——1 1/2
    		1 1/2
    		3/8"-16
    		4007/16"3/8"13131T550000
    2 3/8"602
    		——2
    		2
    		3/8"-16
    		4007/16"3/8"13131T560000
    2 7/8"732 1/2
    		—2 1/2
    		2 1/2
    		2 1/2
    		1/2"-13
    		5009/16"9/16"13131T570000
    3 1/2"893
    		—3
    		3
    		3
    		1/2"-13
    		5009/16"9/16"13131T580000
    4 1/2"1144
    		—4
    		4
    		4
    		5/8"-11
    		5509/16"11/16"13131T6100000
    5 9/16"1415
    		———55/8"-11
    		5509/16"11/16"13131T6200000
    6 5/8"1686
    		———63/4"-10
    		6009/16"13/16"13131T6300000
     
    304 Stainless Steel
    1 1/16"273/4
    		——3/4
    		3/4
    		3/8"-16
    		4007/16"7/16"13131T6600000
    1 5/16"331
    		——1
    		1
    		3/8"-16
    		4007/16"7/16"13131T6700000
    1 11/16"431 1/4
    		1 1/2
    		—1 1/4
    		1 1/4
    		3/8"-16
    		4007/16"7/16"13131T6800000
    1 7/8"481 1/2
    		——1 1/2
    		1 1/2
    		3/8"-16
    		4007/16"7/16"13131T6900000
    2 3/8"602
    		——2
    		2
    		3/8"-16
    		4007/16"7/16"13131T7100000
    2 7/8"732 1/2
    		—2 1/2
    		2 1/2
    		2 1/2
    		1/2"-13
    		5009/16"9/16"13131T7200000
    3 1/2"893
    		—3
    		3
    		3
    		1/2"-13
    		5009/16"9/16"13131T7300000
    4"1023 1/2
    		—3 1/23 1/23 1/21/2"-13
    		5009/16"9/16"13131T7400000
    4 1/2"1144
    		—4
    		4
    		4
    		5/8"-11
    		5509/16"11/16"13131T7500000
    5 9/16"1415
    		———55/8"-11
    		5509/16"11/16"13131T7600000
    6 5/8"1686
    		———63/4"-10
    		6009/16"13/16"13131T7700000
     

    Quick-Mount Push-to-Close Clamp Pipe Hangers

    Image of Product. Front orientation. Pipe Hangers. Quick-Mount Push-to-Close Clamp Pipe Hangers, Threaded-Rod Mount.
    Image of Product. Strut-Channel/Threaded-Rod Mount. Front orientation. Pipe Hangers. Quick-Mount Push-to-Close Clamp Pipe Hangers, Strut-Channel/Threaded-Rod Mount.

    Threaded-Rod Mount

    Strut-Channel/Threaded-Rod

    Mount

    Install and lock your line into place faster than any other hanger we sell. Snap the hanger onto a threaded rod, then press your line into the open hanger and close by hand without extra tools or adjustments.
    Strut-Channel Mount—These hangers also connect to strut channel without additional fasteners.
    Nylon—Lightweight, nonconductive, and naturally rust resistant. The plastic won't cause corrosion on metal parts. It does swell and weaken when exposed to moisture, so these are best for dry environments.
    ID
    Inch
    Metric,
    mm
    For Pipe
    Size
    For Copper
    Tube Size
    For Thread
    Size
    For Strut
    Channel Wd.
    Wt. Cap.,
    lb.
    Each
    Threaded-Rod Mount
     
    Nylon Plastic
    3/4"193/8
    		5/8
    		3/8"-16
    		—1503945T7100000
    1"25—3/4
    		3/8"-16
    		—1503945T730000
    1 1/4"32—1
    		3/8"-16
    		—1503945T750000
    1 1/2"38—1 1/4
    		3/8"-16
    		—1503945T770000
    2"511 1/2
    		—3/8"-16
    		—1503945T790000
    Quick-Mount Plastic Clamping Hanger, 2" ID
    EachIn stock
     
    Strut-Channel/Threaded-Rod Mount
     
    Nylon Plastic
    1/2" to 5/8"12 to 161/4
    		3/8, 1/2
    		3/8"-16
    		1 5/8"1703166T410000
    11/16" to 3/4"17 to 203/8
    		5/8
    		3/8"-16
    		1 5/8"1903166T420000
    13/16" to 15/16"21 to 241/2
    		3/4
    		3/8"-16
    		1 5/8"2103166T430000
    1" to 1 1/8"25 to 293/4
    		1
    		3/8"-16
    		1 5/8"3103166T440000
    1 3/16" to 1 5/16"30 to 341
    		—3/8"-16
    		1 5/8"3203166T450000
    1 5/8" to 1 11/16"40 to 441 1/4
    		1 1/2
    		3/8"-16
    		1 5/8"3603166T460000
    1 7/8" to 2 1/8"48 to 541 1/2
    		2
    		3/8"-16
    		1 5/8"3803166T470000
    2 1/4" to 2 7/16"56 to 632
    		—3/8"-16
    		1 5/8"4103166T480000
    2 5/8" to 3"66 to 762 1/2
    		2 1/2
    		3/8"-16
    		1 5/8"5003166T490000
    3 1/8" to 3 5/8"79 to 933
    		3, 3 1/2
    		3/8"-16
    		1 5/8"6003166T510000
    4" to 4 1/2"101 to 1153 1/2, 4
    		4
    		3/8"-16
    		1 5/8"9503166T5200000
     

    Roller Loop Pipe Hangers

    Image of Product. Front orientation. Contains Annotated. Pipe Hangers. Roller Loop Pipe Hangers.
    Compensate for linear movement as pipes expand and contract. The roller turns to accommodate motion as pipes carry fluids and gases at fluctuating temperatures or pressures. Attach to the ceiling with a threaded rod and nut (sold separately) or other fastener.
    ID
    For Conduit
    Trade Size
    Inch
    Metric,
    mm
    For Pipe
    Size
    EMT
    IMC
    Rigid
    For Thread
    Size
    Wt. Cap.,
    lb.
    Mounting
    Hole Dia.
    No. of
    Nuts Req.
    Each
    Steel
    2 3/8"602
    		—2
    		2
    		3/8"-16
    		1507/16"13084T31000000
    2 7/8"732 1/2
    		2 1/2
    		2 1/2
    		2 1/2
    		1/2"-13
    		2209/16"13084T3200000
    3 1/2"893
    		3
    		3
    		3
    		1/2"-13
    		3109/16"13084T3300000
    4"1023 1/2
    		3 1/23 1/23 1/21/2"-13
    		3909/16"13084T3400000
    4 1/2"1144
    		4
    		4
    		4
    		5/8"-11
    		47011/16"13084T3500000
    5 9/16"1415
    		——55/8"-11
    		68011/16"13084T3600000
    6 5/8"1686
    		——63/4"-10
    		78013/16"13084T3700000
    8 5/8"2198
    		———3/4"-10
    		78013/16"13084T38000000
    10 3/4"27310
    		———7/8"-9
    		96015/16"13084T39000000
    12 3/4"32412
    		———7/8"-9
    		1,20015/16"13084T41000000
    14"35614———1"-8
    		1,2001 1/8"13084T42000000
    16"40616———1"-8
    		1,2001 1/8"13084T43000000
     

    Stackable Vibration-Damping Clamp Pipe Hangers

    Image of ProductInUse. Shown Connected. Front orientation. Pipe Hangers. Stackable Vibration-Damping Clamp Pipe Hangers.

    Shown

    Connected

    Image of Product. Front orientation. Pipe Hangers. Stackable Vibration-Damping Clamp Pipe Hangers, End Clamps.

    End Clamps

    Image of Product. Front orientation. Pipe Hangers. Stackable Vibration-Damping Clamp Pipe Hangers, Stacking Clamps.

    Stacking

    Clamps

    Stack these pipe hangers to organize multiple lines of pipe, tubing, and conduit. The rubber tightly fits around lines to minimize disruptive noise and equipment damage. It also prevents debris build-up and corrosion from metal-to-metal contact.
    End Clamps—The top plate has a threaded hole for mounting with threaded rod. The bottom plate has fasteners for holding clamps together. You can attach a stacking clamp to the bottom of an end clamp.
    Stacking Clamps—Include stacking hardware and a plate for attaching to an end clamp or other stacking clamps. To mount, the stacked clamps must be connected to an end clamp.
    ID
    For Conduit
    Trade Size
    End Clamps
    Stacking Clamps
    Inch
    Metric,
    mm
    For Pipe
    Size
    For Copper
    Tube Size
    EMT
    IMC
    Rigid
    Wt. Cap.,
    lb.
    For Thread
    Size
    Each
    Each
    Santoprene Rubber
    1/4"6—————3503/8"-16
    		3063T110000003063T19000000
    1/2"131/8
    		3/8
    		———3503/8"-16
    		3063T12000003063T2100000
    3/4"193/8
    		5/8
    		1/2
    		—3/8
    		3503/8"-16
    		3063T13000003063T2200000
    1"25—3/4
    		3/4
    		——3503/8"-16
    		3063T14000003063T2300000
    1"25—3/4
    		3/4
    		——3503/8"-16
    		3063T24000003063T3100000
    1 1/2"38—1 1/4
    		1 1/4
    		——3503/8"-16
    		3063T25000003063T3200000
    2"511 1/2
    		——1 1/2
    		1 1/2
    		3503/8"-16
    		3063T26000003063T3300000
    2"511 1/2
    		——1 1/2
    		1 1/2
    		3503/8"-16
    		3063T84000003063T9500000
    2 1/2"642
    		———2
    		3503/8"-16
    		3063T85000003063T9600000
    3"762 1/2
    		—2 1/2
    		—2 1/2
    		3503/8"-16
    		3063T86000003063T9700000
    3 1/2"893
    		—3
    		3
    		3
    		3503/8"-16
    		3063T87000003063T9800000
     

    Strap-Mount Clamp Pipe Hangers

    Image of Product. Front orientation. Contains Annotated. Pipe Hangers. Strap-Mount Clamp Pipe Hangers.
    Hang and align pipe, tube, and conduit in tight or uneven spaces. These close-fitting hangers holds lines more securely than loop hangers. Mount through the unthreaded hole with a fastener.
    Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture, but won't stand up to chemicals.
    ID
    Mounting Hole
    Inch
    Metric,
    mm
    For Pipe
    Size
    Wt. Cap.,
    lb.
    Ctr.-to-Ctr.
    No. of (Dia.)
    Each
    Zinc-Plated Steel
    1 7/8"481 1/2
    		1507/8"5 (9/32"), 4 (7/32")30565T500000
    2 3/8"602
    		1507/8"5 (9/32"), 4 (7/32")30565T60000
    3 1/2"893
    		1507/8"5 (9/32"), 4 (7/32")30565T70000
    4 1/2"1144
    		1507/8"5 (9/32"), 4 (7/32")30565T80000
    6 5/8"1686
    		1507/8"5 (9/32"), 4 (7/32")30565T900000
     

    Stackable Clamp Pipe Hangers

    Image of Product. Shown Connected. Front orientation. Pipe Hangers. Stackable Clamp Pipe Hangers.
    Image of Product. Front orientation. Pipe Hangers. Stackable Clamp Pipe Hangers, Hinged, End Clamps.

    Shown

    Connected

    Hinged

    End Clamps

    Image of Product. Front orientation. Pipe Hangers. Stackable Clamp Pipe Hangers, Two Piece, End Clamps.
    Image of Product. Front orientation. Pipe Hangers. Stackable Clamp Pipe Hangers, Two Piece, Stacking Clamps.

    Two Piece

    End Clamps

    Two Piece

    Stacking Clamps

    Stack these hangers to organize multiple lines of pipe, tubing, and conduit at any angle. Mount with threaded rod (not included) or connect two hangers using the included stacking screw.
    Hinged—Combine the flexibility of a two-piece clamp with the simplicity of a one-piece clamp. These are easy to assemble, reposition, and take apart.
    Two Piece—You don't need to access the end of your line to install these clamps. Detach the two halves and place them around pipe.
    303 Stainless Steel—Withstand mild chemicals and solvents and won't rust in wet environments.
    End Clamps—Flat on one side and round on the other. Mount the flat side to threaded rod or connect it to the top of a stacking clamp. The round side has a finished look.
    Stacking Clamps— Flat on top and bottom. Twist threaded rod through the stacking hole on top or the mounting hole on the bottom. You can also use a fastener to connect the top of one hanger to the bottom of another hanger.
    ID
    End Clamps
    Stacking Clamps
    Inch
    Metric,
    mm
    For Pipe
    Size
    For Copper
    Tube Size
    For EMT Conduit
    Trade Size
    For Thread
    Size
    Each
    Stacking Hole
    Thread Size
    Each
    Hinged
     
    Steel
    3/4"193/8
    		5/8
    		3/4
    		1/4"-20
    		5270N11000000————0
    7/8"221/2
    		3/4
    		3/4
    		1/4"-20
    		5270N3200000————0
    1"25——1
    		1/4"-20
    		5270N1200000————0
    1 1/8"293/4
    		1
    		1
    		1/4"-20
    		5270N1300000————0
    1 1/4"32——1 1/4
    		1/4"-20
    		5270N1400000————0
    1 3/8"351
    		1 1/4
    		1 1/4
    		1/4"-20
    		5270N1500000————0
    1 1/2"38——1 1/2
    		1/4"-20
    		5270N1600000————0
    1 11/16"421 1/4
    		1 1/2
    		1 1/2
    		1/4"-20
    		5270N3600000————0
    1 15/16"491 1/2
    		—2
    		1/4"-20
    		5270N3800000————0
     
    303 Stainless Steel
    3/4"193/8
    		5/8
    		3/4
    		1/4"-20
    		5270N2100000————0
    7/8"221/2
    		3/4
    		3/4
    		1/4"-20
    		5270N5200000————0
    1"25——1
    		1/4"-20
    		5270N2200000————0
    1 1/8"293/4
    		1
    		1
    		1/4"-20
    		5270N2300000————0
    1 1/4"32——1 1/4
    		1/4"-20
    		5270N2400000————0
    1 3/8"351
    		1 1/4
    		1 1/4
    		1/4"-20
    		5270N25000000————0
    1 1/2"38——1 1/2
    		1/4"-20
    		5270N26000000————0
    1 11/16"421 1/4
    		1 1/2
    		1 1/2
    		1/4"-20
    		5270N5600000————0
    1 15/16"491 1/2
    		—2
    		1/4"-20
    		5270N5800000————0
     
    Two Piece
     
    Steel
    3/4"193/8
    		5/8
    		1/2
    		1/4"-20
    		2236T170000010-24
    		2236T11000000
    7/8"221/2
    		3/4
    		3/4
    		1/4"-20
    		2236T610000010-24
    		2236T7100000
    1"25—3/4
    		3/4
    		1/4"-20
    		2236T180000010-24
    		2236T1200000
    1 1/8"293/4
    		1
    		—1/4"-20
    		2236T190000010-24
    		2236T1300000
    1 1/4"32—1
    		1
    		1/4"-20
    		2236T270000010-24
    		2236T1400000
    1 3/8"351
    		1 1/4
    		—1/4"-20
    		2236T280000010-24
    		2236T1500000
    1 1/2"38—1 1/4
    		1 1/4
    		1/4"-20
    		2236T290000010-24
    		2236T1600000
    1 11/16"421 1/4
    		1 1/2
    		1 1/2
    		1/4"-20
    		2236T620000010-24
    		2236T7200000
    1 15/16"491 1/2
    		—2
    		1/4"-20
    		2236T630000010-24
    		2236T7300000
     
    303 Stainless Steel
    3/4"193/8
    		5/8
    		1/2
    		1/4"-20
    		2236T310000010-24
    		2236T2100000
    7/8"221/2
    		3/4
    		3/4
    		1/4"-20
    		2236T520000010-24
    		2236T4200000
    1"25—3/4
    		3/4
    		1/4"-20
    		2236T320000010-24
    		2236T2200000
    1 1/8"293/4
    		1
    		—1/4"-20
    		2236T330000010-24
    		2236T2300000
    1 1/4"32—1
    		1
    		1/4"-20
    		2236T340000010-24
    		2236T2400000
    1 3/8"351
    		1 1/4
    		—1/4"-20
    		2236T350000010-24
    		2236T2500000
    1 1/2"38—1 1/4
    		1 1/4
    		1/4"-20
    		2236T360000010-24
    		2236T2600000
    1 11/16"421 1/4
    		1 1/2
    		1 1/2
    		1/4"-20
    		2236T550000010-24
    		2236T4500000
    1 15/16"491 1/2
    		—2
    		1/4"-20
    		2236T560000010-24
    		2236T4600000
     

    Cut-to-Size Strap-Mount Loop Pipe Hangers

    Image of Product. Front orientation. Pipe Hangers. Cut-to-Size Strap-Mount Loop Pipe Hangers, Perforated.
    Image of Product. Front orientation. Pipe Hangers. Cut-to-Size Strap-Mount Loop Pipe Hangers, Solid.

    Perforated

    Solid

    Cut the length of strap you need to hang duct, pipe, and other lines. Wrap these flexible hangers around pipe and round duct of any size.
    Perforated—Come with mounting holes, so you don't need to drill. Large and small holes are alternately spaced.
    Solid—Straps are not perforated so you can drill mounting holes at the size you need.
    Galvanized Steel—These clamps won't rust in wet and outdoor environments, but they'll corrode when exposed to salt water and chemicals.
    Copper-Plated Steel—Won't corrode when used with copper tubing.
    304 Stainless Steel—Withstand mild chemicals and solvents and won't rust in wet environments.
    10 ft. Long
    100 ft. Long
    For Pipe Size
    Ga.
    Mounting Hole
    Dia.
    Each
    Each
    Perforated
     
    Galvanized Steel
    1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 3 1/2, 4, 5, 6
    		241/8", 1/4"3051T11000003051T12000000
    1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 3 1/2, 4, 5, 6
    		201/8", 1/4"3051T1300003051T1400000
     
    Copper-Plated Steel
    1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 3 1/2, 4, 5, 6
    		243/16", 1/4"3051T1500003051T1600000
     
    304 Stainless Steel
    1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 3 1/2, 4, 5, 6
    		243/16", 1/4"3051T21000003051T22000000
    1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 3 1/2, 4, 5, 6
    		203/16", 1/4"3051T23000003051T24000000
     
    Solid
     
    Galvanized Steel
    1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 3 1/2, 4, 5, 6
    		24—3051T2500003051T2600000
    1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 3 1/2, 4, 5, 6
    		20—3051T27000003051T2800000
     
    304 Stainless Steel
    1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 3 1/2, 4, 5, 6
    		24—3051T31000003051T32000000
    1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 3 1/2, 4, 5, 6
    		20—3051T33000003051T34000000
     

    Quick-Mount Multiline Loop Pipe Hangers

    Image of Product. Front orientation. Pipe Hangers. Quick-Mount Multiline Loop Pipe Hangers.
    Install and route multiple lines of pipe, tubing, or conduit with a single hanger that locks in place quickly. Pinch the mounting brackets together, slide onto a threaded rod, and release. Open the latch to add, adjust, and remove lines as needed. You can also detach the hanger from the mounting brackets to secure lines directly to flat surfaces.
    Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture, but won't stand up to chemicals.
    ID
    For Conduit
    Trade Size
    Inch
    Metric,
    mm
    For Pipe
    Size
    For Copper
    Tube Size
    EMT
    IMC
    Rigid
    For Thread Size
    Wt. Cap.,
    lb.
    Each
    Zinc-Plated Steel
    1 1/4"33—1
    		1
    		——1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24
    		202908N1100000
    1 3/8"361
    		1 1/4
    		—1
    		1
    		1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24
    		202908N120000
    2 3/8"612
    		——2
    		2
    		1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24
    		202908N130000
    3 3/8"86—————1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24
    		202908N1400000
     

    Hook-Mount Loop Pipe Hangers

    Image of ProductInUse. Front orientation. Pipe Hangers. Hook-Mount Loop Pipe Hangers.
    Temporarily hang pipe and tubing at worksites. You can also install these pipe hangers in places where welding and fastening aren't possible. Slide material through the strap, then adjust the D-rings to change the strap's hanging height.
    Hook
    Strap
    3 ft. Long Strap
    6 ft. Long Strap
    For Pipe Size
    Wt. Cap.,
    lb.
    Opening
    Wd.
    Ht.
    Material
    Wd.
    Thick.
    Material
    Color
    Each
    Each
    1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 3 1/2, 4, 5, 6
    		1403/4"2 3/4"Galvanized Steel1 1/2"1/16"Polypropylene PlasticOrange2867N11000002867N1200000
    back to top