Filter by
Color
System of Measurement
For Minimum Nozzle Opening Diameter
Tensile Strength
Flexibility
Container Type
Weight
Density
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Flexural Modulus
Hardness
Hardness Rating
Manufacturer Model Number
Maximum Temperature
Minimum Temperature
Printer Speed
REACH
RoHS
Speed
U.S.–Mexico–Canada Agreement (USMCA) Qualifying
Water Absorption
Dremel 3D Printer Filaments
 |
Build parts and prototypes from these filaments using Dremel fused filament fabrication (FFF) 3D printers. An RFID tag on the spool communicates with your printer, automatically adjusting it to the correct temperature and print speed for the filament material and notifying you when the filament is running out.
Maximum exposure temperature is the point at which a printed part will begin to deform. Above this temperature, your printed parts will start to lose structural integrity.
Eco-ABS
 |
Black |
ECO-ABS is less brittle and more impact resistant than PLA, so these filaments are good for printing parts that are frequently handled, dropped, or heated. They are, however, a little more high maintenance—parts may warp during cooling, so they require a heated printer bed.
Tensile Strength—Tensile strength is the best measure of a filament's overall strength. Similar to the stress applied on a rope during a game of tug-of-war, it's the amount of pulling force a material can handle before breaking. A higher rating means a stronger filament. A tensile strength of 5,000 psi and above is considered good; 12,000 psi and above is excellent.
Spool, mm | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Dia., mm | Printing Temp. | For Printer Bed Temp. | Tensile Strength, psi | Max. Exposure Temp. | For Min. Nozzle Opening Dia., mm | Dia. | Dp. | Wt., g | Color | Each | ||
| ECO-BLA-01 | 1.75 | 190° to 240° C 374° to 464° F | 60° C 140° F | 8,410 | 63° C 145° F | 0.2 | 181 | 55 | 750 | Black | 3653N23 | 000000 | |
