0.8 mm 3D Printer Nozzles

Filter by

Body Material

Opening Diameter

Thread Size

Trade Name

Filament Diameter

Thread Length

Material

Tip Material

Tip Length

Body Core Type

Width

Length

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

Hardness

Knoop 5100 HK 0.1

Rockwell B50 to Rockwell B82

REACH

RoHS

Compliant with Exemptions

Thermal Conductivity

Hardness Rating

Maximum Temperature

Performance

19 Products

3D Printer Nozzles

Extrude melted filament onto print surfaces to build 3D printed parts. These nozzles work with fused filament fabrication (FFF) 3D printers. Screw them into your printer’s heating end to install.

When choosing a nozzle, make sure the trade name is compatible with your printer and heating end. You should also consider the nozzle’s material and opening diameter, which will affect the quality of your part.

Brass Tip—Brass-tipped nozzles are the most common nozzles used for nonabrasive filaments such as ABS, PLA, and nylon. Since they transfer heat quickly, they produce clean prints and are unlikely to clog. However, brass is soft, so it will wear out quickly when used with abrasive materials.

Nickel-Plated Brass Tip—Brass-tipped nozzles are the most common nozzles used for nonabrasive filaments such as ABS, PLA, and nylon. Since they transfer heat quickly, they produce clean prints and are unlikely to clog. However, brass is soft, so it will wear out quickly when used with abrasive materials. Nickel-plated nozzles have a slippery surface, which creates less friction, so filaments flow smoothly. The slippery surface also prevents plastic from sticking to the nozzle.

Nickel-Plated Copper Tip—Copper-tipped nozzles transfer heat better than brass-tipped nozzles, making them best for PEEK, Ultem PEI, and other materials that require high heat to print. Nickel-plated nozzles have a slippery surface, which creates less friction, so filaments flow smoothly. The slippery surface also prevents plastic from sticking to the nozzle.

303 Stainless Steel Tip—303 stainless-steel-tipped nozzles don’t contain lead, so choose them when printing parts that may touch skin or food. However, they don’t transfer heat very well, which means they need high printing temperatures and don’t print as quickly as brass- or copper-tipped nozzles.

Opening Diameter—For opening diameter, consider whether you need precision or speed. The smaller the nozzle opening, the smoother the finish and the finer the detail, making these nozzles best for small and intricate parts. The larger the nozzle opening, the faster they print and less likely they are to clog, which is good for abrasive materials and large, strong parts. The most common opening to balance precision and speed is 0.4 mm.

		Thread					Body
	Opening Dia., mm	Size	Lg., mm	Wd., mm	Lg., mm	Tip Lg., mm	Core Type	Material	Hardness	Thermal Conductivity, W/(m⋅°C)	Choose a Filament Diameter, mm		Each
V6







				Brass Tip

				0.8	M6 × 1 mm	6	7	12.5	2	Round Hole	Brass	Rockwell B50 to Rockwell B82 (Soft)	123	1.75 , 2.85	3695N307	000000




						Nickel-Plated Copper Tip

						0.8	M6 × 1 mm	6	7	12.5	2	Round Hole	Nickel-Plated Copper	Rockwell C40 (Hard)	320	1.75 , 2.85	3695N315	00000




								303 Stainless Steel Tip

								0.8	M6 × 1 mm	6	7	12.5	2	Round Hole	303 Stainless Steel	Rockwell C19 (Medium)	16.2	1.75	3695N326	00000


								Volcano







												Brass Tip

												0.8	M6 × 1 mm	14.5	7	21	2	Round Hole	Brass	Rockwell B50 to Rockwell B82 (Soft)	123	1.75 , 2.85	3695N329	00000




														Nickel-Plated Copper Tip

														0.8	M6 × 1 mm	14.5	7	21	2	Round Hole	Nickel-Plated Copper	Rockwell C40 (Hard)	320	1.75 , 2.85	3695N335	00000


														M6







																		Nickel-Plated Brass Tip

																		0.8	M6 × 1 mm	6	7	12	3.1	Round Hole	Nickel-Plated Brass	Rockwell C65 (Extra Hard)	115	2.85	3695N112	00000


																		MK8







																				Nickel-Plated Brass Tip

		0.8																		M6 × 1 mm	5	7	13	3.9	Round Hole	Nickel-Plated Brass	Rockwell C65 (Extra Hard)	115	1.75	3695N105	00000

Abrasion-Resistant 3D Printer Nozzles

Diamond Tip,

Brass Body

Nickel-Plated

Steel Tip,

Nickel-Plated

Steel Body

Steel Tip

Steel Body

Often used when printing with carbon-fiber- and glass-filled filaments, these nozzles resist wear from abrasive materials, so they last longer than standard nozzles. They are compatible with fused filament fabrication (FFF) 3D printers. Screw them into your printer’s heating end to install.

Hardened Steel Tip—Hardened steel nozzles resist wear 10 times better than brass and copper nozzles. However, they don’t transfer heat well, so they require higher printing temperatures.

Hardened Nickel-Plated Steel Tip—Hardened steel nozzles resist wear 10 times better than brass nozzles. However, they don’t transfer heat well, so they require higher printing temperatures. Nickel-plated nozzles have a slippery surface, which creates less friction, so filaments flow smoothly. The slippery surface also prevents plastic from sticking to the nozzle.

Diamond Tip—Diamond-tipped nozzles last longer than any other 3D printing nozzle in our offering, even when using the most abrasive filaments. They also transfer heat the best, improving your printing speed, precision, and layer adhesion.

		Thread					Body
	Opening Dia., mm	Size	Lg., mm	Wd., mm	Lg., mm	Tip Lg., mm	Core Type	Material	Hardness	Thermal Conductivity, W/(m⋅°C)	Choose a Filament Diameter, mm		Each
V6







				Hardened Steel Tip

				0.8	M6 × 1 mm	6	7	12.5	2	Round Hole	Hardened Steel	Rockwell C68 (Ultra Hard)	25	1.75 , 2.85	3695N323	000000




						Diamond Tip

						0.8	M6 × 1 mm	6.3	7	12.5	1.4	Round Hole	Brass	Knoop 5100 HK 0.1 (Ultra Hard)	470	1.75	4502N14	000000


						Volcano







										Hardened Steel Tip

										0.8	M6 × 1 mm	14.5	7	21	2	Round Hole	Hardened Steel	Rockwell C68 (Ultra Hard)	25	1.75 , 2.85	3695N341	00000




												Diamond Tip

												0.8	M6 × 1 mm	14.8	7	21	1.3	Round Hole	Brass	Knoop 5100 HK 0.1 (Ultra Hard)	470	1.75	4502N19	000000


												MK8







																Hardened Nickel-Plated Steel Tip

																0.8	M6 × 1 mm	5	7	13	3.9	Round Hole	Hardened Nickel-Plated Steel	Rockwell C65 (Extra Hard)	26	1.75	3695N115	00000




																		Diamond Tip

																		0.8	M6 × 1 mm	4	7	13	1.4	Round Hole	Brass	Knoop 5100 HK 0.1 (Ultra Hard)	470	1.75	4502N25	000000

High-Flow 3D Printer Nozzles

Print up to 60% faster with better layer bonding than standard nozzles. These nozzles have a split core through the body that makes more contact with the filament to melt it quicker than nozzles with a single hole through the body. The tip is brass, which is the most common material used for nonabrasive filaments such as ABS, PLA, and nylon. Brass transfers heat quickly, so these nozzles produce clean prints and are unlikely to clog. However, brass is soft, so it will wear out quickly when used with abrasive materials. A nickel plating makes their surface slippery, creating less friction so filaments flow smoothly and help prevent plastic from sticking to the nozzle.

They work with fused filament fabrication (FFF) 3D printers. Screw them into your printer’s heating end to install.

When choosing a nozzle, make sure the trade name is compatible with your printer and heating end.

Opening Diameter—You should also consider the nozzle’s opening diameter, which affects precision and speed. The smaller the nozzle opening, the smoother the finish and the finer the detail, making these nozzles best for small and intricate parts. The larger the nozzle opening, the faster they print and less likely they are to clog, which is good for abrasive materials and large, strong parts. The most common opening to balance precision and speed is 0.4 mm.

		Thread					Body
	Opening Dia., mm	Size	Lg., mm	Wd., mm	Lg., mm	Tip Lg., mm	Core Type	Material	Hardness	Thermal Conductivity, W/(m⋅°C)	For Filament Dia., mm		Each
V6







				Nickel-Plated Brass Tip

				0.8	M6 × 1 mm	6	6	12.5	2	Split Hole	Nickel-Plated Brass	Rockwell C40 (Hard)	115	1.75, 2.85	4787N13	000000


				Volcano







								Nickel-Plated Brass Tip

								0.8	M6 × 1 mm	14.5	6	21	2	Split Hole	Nickel-Plated Brass	Rockwell C40 (Hard)	115	1.75, 2.85	4787N26	00000


								MK8







												Nickel-Plated Brass Tip

												0.8	M6 × 1 mm	5	8	13	2.5	Split Hole	Nickel-Plated Brass	Rockwell C40 (Hard)	115	1.75, 2.85	4787N19	00000

Abrasion-Resistant High-Flow 3D Printer Nozzles

Print at faster rates than standard nozzles using abrasive filaments, such as carbon-fiber- and glass-filled filaments. Instead of a single hole through their body, these nozzles have a split core that makes more contact with your filament, speeding up melting for 60% faster flow and better layer bonding. Their body is copper, which also helps transfer heat to the filament for fast melting. To resist abrasion 10 times better than brass tips, the tip of these nozzles is hardened steel. Nickel plating makes their surface slippery, which creates less friction, so filaments flow smoothly. The slippery surface also prevents plastic from sticking to the nozzle.

These nozzles work with fused filament fabrication (FFF) 3D printers. Screw them into your printer’s heating end to install.

When choosing a nozzle, make sure the trade name is compatible with your printer and heating end.

		Thread					Body
	Opening Dia., mm	Size	Lg., mm	Wd., mm	Lg., mm	Tip Lg., mm	Core Type	Material	Hardness	Thermal Conductivity, W/(m⋅°C)	For Filament Dia., mm		Each
V6







				Hardened Nickel-Plated Steel Tip

				0.8	M6 × 1 mm	7.5	6	12.5	2	Split Hole	Nickel-Plated Copper	Rockwell C64 (Extra Hard)	123	1.75, 2.85	4622N13	000000


				Volcano







								Hardened Nickel-Plated Steel Tip

								0.8	M6 × 1 mm	14.5	6	21	2	Split Hole	Nickel-Plated Copper	Rockwell C64 (Extra Hard)	123	1.75, 2.85	4622N22	000000


								MK8







												Hardened Nickel-Plated Steel Tip

												0.8	M6 × 1 mm	5	6	13	2.5	Split Hole	Nickel-Plated Copper	Rockwell C64 (Extra Hard)	123	1.75, 2.85	4622N17	000000