Filter by
Manufacturer
Container Type
Shear Strength
Formulation
Adhesive Type
Consistency
Minimum Temperature
Viscosity
Type
Mix Ratio
Reaches Full Strength
Color
Begins to Harden
Container Size
REACH
RoHS
Cure Type
Approximate Linear Coverage @ Bead Diameter
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Fitting Connection
Elongation
Peel Strength
Toughened Acrylic Structural Adhesives
Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds. Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
3M Scotch-Weld Adhesives

Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
DP810 | 1.64 | Cartridge | 10 min. | 24 hrs. | 3,400 | 30 | 1:1 | Thick Liquid (20,000 cP) | -40° to 180° | Beige | Metal, Plastic, Rubber, Composites, Wood | 00000000 | 000000 |
DP810NS | 1.64 | Cartridge | 10 min. | 24 hrs. | 3,400 | 23 | 1:1 | Paste (95,000 cP) | -40° to 180° | Beige | Metal, Plastic, Rubber, Composites, Wood | 00000000 | 00000 |
Mixer Nozzles, Plungers, and Dispensing Guns
Each | ||
Replacement Plunger for 1.64 fl. oz. 3M Cartridges | 0000000 | 000000 |
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Step Tip) | 0000000 | 0000 |
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Taper Tip) | 0000000 | 0000 |
Dispensing Gun for 1.64 fl. oz. 3M Cartridges | 0000000 | 000000 |
Air-Powered Dispensing Gun for 1.64 fl. oz. 3M Cartridges | 0000000 | 000000 |