Use these crepe paper discs to mask areas while spray painting, as well as to temporarily cover holes for dust protection.

Brush on this liquid to mask small surfaces and irregular shapes.

A high-tack adhesive on one side of this crepe paper tape sticks to plastic sheeting, and a clean-release adhesive on the other side prevents surface damage. Also known as containment tape.

This tubular foam tape compresses to fill the gaps around door jambs and other openings that flat masking tape can't.

Only one edge of this kraft paper tape has adhesive. Apply the sticky side along edges and molding, and the other edge sticks out to catch drips.

Use these convenient cut shapes to mask holes, fastener heads, and small areas while soldering.

Made of polyester plastic, this tape resists tearing in high-temperature masking jobs, such as on circuit boards and when powder coating.

Aluminum foil is laminated to a tough fiberglass cloth to form a high-strength, reflective tape that resists temperatures up to 500° F. Use it for flame-spray masking and wire harness heat shielding.

In addition to handling temperatures up to 500° F, this fiberglass tape is tough enough for abrasive applications such as sand blasting.

Protect screen-printed graphics during high-temperature laminating and molding.

Outline and draw attention to safety zones and hazards with this tape.

Protect parts from radiation, X-rays, moisture, dust, and chemicals during electroplating and similar processes.

Temporarily protect highly polished plastic, metal, and glass surfaces from scratching and marring.

Dirt, dust, and paint overspray get trapped in this tape's fibers to protect surfaces and minimize cleanup. Its low-tack adhesive makes it easy to apply and remove.

Made of pinhole-free crepe paper to seal out light. It is often used in photo processing labs.

With excellent resistance to solvents, this tape is often used as blocking tape on silk screen frames.

Dispensers will hold three 1" wide tape rolls or any combination up to 3" wide.

Larger and heavier than standard tape dispensers, these dispensers are sturdy enough to use with reinforced tape as well as masking and office tape.

To protect sensitive equipment from static buildup, these tape dispensers have a conductive housing and nonskid base that grounds electrical charges by letting them pass through.

Select a precise length of tape, then pull the lever to dispense.