About Structural Adhesives
More
Quick-Set Epoxy Structural Adhesives
For quick repairs, these epoxies begin to harden in 6 minutes or less. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP100NS is nonsagging, so it won't drip from vertical or overhead surfaces.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
DP100 | 1.64 | Cartridge | 5 min. | 48 hrs. | 750 | 2 | 1:1 | Thick Liquid (12,000 cP) | -65° to 320° | Clear | Metal, Plastic, Rubber | 0000000 | 000000 |
DP100 | 6.76 | Cartridge | 5 min. | 48 hrs. | 750 | 2 | 1:1 | Thick Liquid (12,000 cP) | -65° to 320° | Clear | Metal, Plastic, Rubber | 0000000 | 00000 |
DP100NS | 1.64 | Cartridge | 5 min. | 48 hrs. | 840 | 2 | 1:1 | Paste (93,750 cP) | -65° to 320° | Clear | Metal, Plastic, Rubber | 0000000 | 00000 |
Each | ||
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Step Tip) | 0000000 | 00000 |
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Taper Tip) | 0000000 | 0000 |
Mixer Nozzle for 6.76 fl. oz. 3M Cartridges | 0000000 | 0000 |
Replacement Plunger for 1.64 fl. oz. 3M Cartridges | 0000000 | 00000 |
Dispensing Gun for 1.64 fl. oz. 3M Cartridges | 0000000 | 000000 |
Dispensing Gun for 6.76 fl. oz. 3M Cartridges | 0000000 | 000000 |
Air-Powered Dispensing Gun for 1.64 fl. oz. 3M Cartridges | 0000000 | 00000000 |
Epoxy Structural Adhesives
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals. The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP110, 14310, 14260, and 305-1/2 bond dissimilar materials.
DP125, 14255, and 14251 form flexible bonds.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
1838 | 57.6 | Can | 60 min. | 7 days | 2,000 | 4 | 4:5 | Paste (492,500 cP) | -65° to 350° | Green | Metal, Plastic, Rubber, Composites, Glass, Wood | 00000000 | 0000000 |
1838L | 64 | Can | 60 min. | 7 days | 2,000 | 4 | 1:1 | Thick Liquid (11,000 cP) | -65° to 350° | Clear | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 000000 |
DP110 | 1.64 | Cartridge | 8 min. | 48 hrs. | 1,500 | 20 | 1:1 | Thick Liquid (50,000 cP) | -65° to 350° | Clear | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 0000000 | 00000 |
DP110 | 1.64 | Cartridge | 8 min. | 48 hrs. | 2,500 | 20 | 1:1 | Thick Liquid (65,000 cP) | -65° to 350° | Gray | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 0000000 | 00000 |
DP110 | 6.76 | Cartridge | 8 min. | 48 hrs. | 2,500 | 20 | 1:1 | Thick Liquid (65,000 cP) | -65° to 350° | Gray | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 0000000 | 00000 |
DP125 | 1.64 | Cartridge | 15 min. | 7 days | 1,900 | 35 | 1:1 | Thick Liquid (55,000 cP) | -65° to 300° | Gray | Metal, Plastic, Rubber | 0000000 | 00000 |
DP125 | 1.64 | Cartridge | 20 min. | 7 days | 1,500 | 35 | 1:1 | Thick Liquid (16,250 cP) | -65° to 300° | Clear | Metal, Plastic, Rubber | 0000000 | 00000 |
DP190 | 1.64 | Cartridge | 60 min. | 14 days | 850 | 20 | 1:1 | Thick Liquid (8,000 cP) | -65° to 350° | Clear | Metal, Plastic, Rubber, Masonry | 0000000 | 00000 |
DP190 | 6.76 | Cartridge | 60 min. | 14 days | 850 | 20 | 1:1 | Thick Liquid (8,000 cP) | -65° to 350° | Clear | Metal, Plastic, Rubber, Masonry | 00000000 | 00000 |
Each | ||
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Step Tip) | 0000000 | 00000 |
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Taper Tip) | 0000000 | 0000 |
Mixer Nozzle for 6.76 fl. oz. 3M Cartridges | 0000000 | 0000 |
Replacement Plunger for 1.64 fl. oz. 3M Cartridges | 0000000 | 00000 |
Dispensing Gun for 1.64 fl. oz. 3M Cartridges | 0000000 | 000000 |
Dispensing Gun for 6.76 fl. oz. 3M Cartridges | 0000000 | 000000 |
Air-Powered Dispensing Gun for 1.64 fl. oz. 3M Cartridges | 0000000 | 00000000 |
Slow-Set Epoxy Structural Adhesives
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Specifications Met | For Joining | Each | |
2216 | 1.66 gal. | Can | 90 min. | 7 days | 1,700 | 25 | 2:3 | Thick Liquid (81,000 cP) | -65° to 350° | DOD-A-82720 | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 000000000 |
2216 | 3.3 fl. oz. | Tube | 90 min. | 7 days | 1,700 | 25 | 2:3 | Thick Liquid (81,000 cP) | -65° to 350° | DOD-A-82720 | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 00000 |
2216 | 4 fl. oz. | Tube | 2 hrs. | 30 days | 3,000 | 25 | 1:1 | Thick Liquid (10,000 cP) | -65° to 350° | __ | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 00000 |
2216 | 26.6 fl. oz. | Can | 90 min. | 7 days | 1,700 | 25 | 2:3 | Thick Liquid (81,000 cP) | -65° to 350° | DOD-A-82720 | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 000000 |
2216 | 53.3 fl. oz. | Can | 90 min. | 7 days | 1,700 | 25 | 2:3 | Thick Liquid (81,000 cP) | -65° to 350° | DOD-A-82720 | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 000000 |
2216 | 64 fl. oz. | Can | 2 hrs. | 30 days | 3,000 | 25 | 1:1 | Thick Liquid (10,000 cP) | -65° to 350° | __ | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 0000000 | 000000 |
DP190 | 1.64 fl. oz. | Cartridge | 90 min. | 7 days | 1,400 | 20 | 1:1 | Thick Liquid (86,250 cP) | -65° to 350° | __ | Metal, Plastic, Rubber, Masonry | 0000000 | 00000 |
DP190 | 6.76 fl. oz. | Cartridge | 90 min. | 7 days | 1,400 | 20 | 1:1 | Thick Liquid (86,250 cP) | -65° to 350° | __ | Metal, Plastic, Rubber, Masonry | 0000000 | 00000 |
Each | ||
Mixer Nozzle for 1.64-oz. 3M Cartridges (Step Tip) | 0000000 | 00000 |
Mixer Nozzle for 1.64-oz. 3M Cartridges (Taper Tip) | 0000000 | 0000 |
Mixer Nozzle for 6.76-oz. 3M Cartridges | 0000000 | 0000 |
Replacement Plunger for 1.64-oz. 3M Cartridges | 0000000 | 00000 |
Dispensing Gun for 1.64-oz. 3M Cartridges | 0000000 | 000000 |
Dispensing Gun for 6.76 fl. oz. 3M Cartridges | 0000000 | 000000 |
Air-Powered Dispensing Gun for 1.64-oz. 3M Cartridges | 0000000 | 00000000 |
Optically Clear Epoxy Structural Adhesives
For invisible bond lines, these adhesives dry clear. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. Choose an epoxy that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP100 Plus, DP105, and epoxy in 4.5-oz. tubes bond dissimilar materials.
Container | Strength | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | For Joining | Each | |
DP100 Plus | 1.64 | Cartridge | 3 min. | 48 hrs. | 1,700 | 13 | 1:1 | Thick Liquid (8,750 cP) | -65 to 300° F | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 0000000 | 000000 |
DP105 | 1.64 | Cartridge | 4 min. | 48 hrs. | 1,300 | 35 | 1:1 | Thick Liquid (7,500 cP) | -65 to 300° F | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 0000000 | 00000 |
Each | ||
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Step Tip) | 0000000 | 00000 |
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Taper Tip) | 0000000 | 0000 |
Replacement Plunger for 1.64 fl. oz. 3M Cartridges | 0000000 | 00000 |
Dispensing Gun for 1.64 fl. oz. 3M Cartridges | 0000000 | 000000 |
Air-Powered Dispensing Gun for 1.64 fl. oz. 3M Cartridges | 0000000 | 00000000 |
Toughened Epoxy Structural Adhesives
Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds. The most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts. Use with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP420NS, DP460NS, E-40HT, and 9462 are nonsagging, so they won't drip from vertical or overhead surfaces.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
DP405 | 1.69 | Cartridge | 3 min. | 7 days | 2,260 | 40 | 2:1 | Thick Liquid (9,500 cP) | -65° to 350° | Black | Metal, Plastic, Rubber | 00000000 | 000000 |
DP420 | 1.69 | Cartridge | 20 min. | 24 hrs. | 280 | 50 | 2:1 | Thick Liquid (30,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Composites | 0000000 | 00000 |
DP420 | 1.69 | Cartridge | 20 min. | 24 hrs. | 400 | 50 | 2:1 | Thick Liquid (30,000 cP) | -65° to 350° | Black | Metal, Plastic, Composites | 0000000 | 00000 |
DP420 | 6.76 | Cartridge | 20 min. | 24 hrs. | 280 | 50 | 2:1 | Thick Liquid (30,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Composites | 0000000 | 000000 |
DP420 | 6.76 | Cartridge | 20 min. | 24 hrs. | 400 | 50 | 2:1 | Thick Liquid (30,000 cP) | -65° to 350° | Black | Metal, Plastic, Composites | 00000000 | 000000 |
DP420 | 13.5 | Cartridge | 20 min. | 24 hrs. | 280 | 50 | 2:1 | Thick Liquid (30,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Composites | 00000000 | 000000 |
DP420 | 13.5 | Cartridge | 20 min. | 24 hrs. | 400 | 50 | 2:1 | Thick Liquid (30,000 cP) | -65° to 350° | Black | Metal, Plastic, Composites | 00000000 | 000000 |
DP420NS | 1.69 | Cartridge | 20 min. | 24 hrs. | 470 | 50 | 2:1 | Paste (180,000 cP) | -65° to 350° | Black | Metal, Plastic, Composites | 00000000 | 00000 |
DP420NS | 6.76 | Cartridge | 20 min. | 24 hrs. | 470 | 50 | 2:1 | Paste (180,000 cP) | -65° to 350° | Black | Metal, Plastic, Composites | 00000000 | 000000 |
DP420NS | 13.5 | Cartridge | 20 min. | 24 hrs. | 470 | 50 | 2:1 | Paste (180,000 cP) | -65° to 350° | Black | Metal, Plastic, Composites | 00000000 | 000000 |
DP460 | 1.69 | Cartridge | 60 min. | 24 hrs. | 2,500 | 60 | 2:1 | Thick Liquid (30,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Composites | 0000000 | 00000 |
DP460 | 6.76 | Cartridge | 60 min. | 24 hrs. | 2,500 | 60 | 2:1 | Thick Liquid (30,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Composites | 0000000 | 000000 |
DP460 | 13.5 | Cartridge | 60 min. | 24 hrs. | 2,500 | 60 | 2:1 | Thick Liquid (30,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Composites | 00000000 | 000000 |
DP460NS | 1.69 | Cartridge | 60 min. | 24 hrs. | 2,680 | 60 | 2:1 | Paste (125,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Composites | 0000000 | 00000 |
DP460NS | 6.76 | Cartridge | 60 min. | 24 hrs. | 2,680 | 60 | 2:1 | Paste (125,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Composites | 00000000 | 000000 |
DP460NS | 13.5 | Cartridge | 60 min. | 24 hrs. | 2,680 | 60 | 2:1 | Paste (125,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Composites | 0000000 | 000000 |
Each | ||
Mixer Nozzle for 1.69 fl. oz. 3M Cartridges (Step Tip) | 0000000 | 00000 |
Mixer Nozzle for 1.69 fl. oz. 3M Cartridges (Taper Tip) | 0000000 | 0000 |
Mixer Nozzle for 6.76 fl. oz. and 13.5 fl. oz. 3M Cartridges | 0000000 | 0000 |
Replacement Plunger for 1.69 fl. oz. 3M Cartridges | 0000000 | 00000 |
Dispensing Gun for 1.69 fl. oz. 3M Cartridges | 0000000 | 000000 |
Dispensing Gun for 6.76 fl. oz. 3M Cartridges | 0000000 | 000000 |
Air-Powered Dispensing Gun for 1.69 fl. oz. 3M Cartridges | 0000000 | 00000000 |
Flame-Retardant Epoxy Structural Adhesives
These self-extinguishing epoxies meet UL 94 V-0 for flame retardance. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.
The size listed is the combined total of the two parts. Use a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
3M Scotch-Weld Adhesives | |||||||||||||
DP100FR | 1.64 | Cartridge | 5 min. | 48 hrs. | 1,100 | 2 | 1:1 | Thick Liquid (73,750 cP) | -65° to 300° | Off-White | Metal, Plastic, Rubber | 0000000 | 000000 |
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Step Tip) | 0000000 | Each | 00000 |
Replacement Plunger for 1.64 fl. oz. 3M Cartridges | 0000000 | Each | 00000 |
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Taper Tip) | 0000000 | Each | 0000 |
Dispensing Gun for 1.64 fl. oz. Cartridges | 0000000 | Each | 000000 |
Air-Powered Dispensing Gun for 1.64 fl. oz. 3M Cartridges | 0000000 | Each | 00000000 |