McMaster-Carr logo
    Filter by
    System of Measurement
    Tolerance Rating
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    1,318 Products

    Shaft Type

    Shaft Type

    Performance

    Linear Shafts

    Image of Product. Front orientation. Linear Shafts.
    Pair with linear bearings and shaft supports to create smooth, precise motion. These linear shafts are turned, ground, and polished to tight tolerances and hardened to resist wear.
    Steel—Stronger than aluminum and stainless steel. These shafts are best for dry environments since moisture will cause them to rust.
    Chrome-Plated Steel—Combine the strength of steel and the corrosion resistance of stainless steel. The chrome plating creates a hard, protective barrier on the surface of the shaft. However, the plating can chip or flake under repeated impact or shock loads.
    Highly Wear-Resistant 440C Stainless Steel and Highly Wear-Resistant 420 Stainless Steel—Balancing strength, wear resistance, and corrosion resistance, these shafts can handle moisture and mild cleaning solutions.
    Corrosion-Resistant 17-4 PH Stainless Steel—More corrosion resistant than 420 and 440C stainless steel, but not as hard or wear resistant.
    Lightweight Ceramic-Coated Aluminum—Lightweight and corrosion resistant with an ultra-hard, slippery ceramic coating for wear resistance. Even contaminants such as weld spatter, molten glass, and paint won't stick to these shafts. While the coating is hard, they have a soft core, so they should be used with linear sleeve bearings to avoid denting the shaft.
    Lightweight Anodized Aluminum—One-third the weight of steel and corrosion resistant with an ultra-hard coating that resists wear. While the coating is hard, these shafts have a soft core, so they should be used with linear sleeve bearings to avoid denting the shaft.
    Surface Smoothness—The lower the microinch value, the smoother the finish and the less friction it will cause on the bearing.
    Certificate
    Lg.
    Dia. Tolerance
    Hardness
    Hardness
    Rating
    Surface Smoothness,
    μin
    Type
    Form
    Each
    Steel
     
    1/4" Diameter
    3"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K41100000
    4"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K4120000
    5"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K4130000
    6"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K110000
    6"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T12100000
    7"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K4140000
    8"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K1010000
    9"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K210000
    10"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K1070000
    12"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K310000
    12"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T12200000
    14"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K4150000
    15"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K3150000
    16"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K41600000
    18"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K4100000
    20"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K41700000
    24"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K5100000
    30"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K8100000
    36"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K6100000
    36"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T12300000
    48"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K7100000
    60"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K32400000
    72"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K32700000
    72"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T124000000
    84"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K21100000
    96"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K31200000
     
    3/8" Diameter
    3"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K4180000
    4"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K4190000
    5"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K4210000
    6"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K120000
    6"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T13100000
    7"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K4220000
    8"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K1020000
    9"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K220000
    10"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K1080000
    12"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K320000
    12"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T13200000
    14"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K42300000
    15"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K32500000
    16"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K42400000
    18"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K4200000
    20"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K42500000
    24"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K5200000
    30"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K8200000
    36"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K6200000
    36"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T13300000
    48"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K7200000
    60"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K32600000
    72"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K32800000
    72"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T134000000
    84"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K21200000
    96"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K31300000
     
    1/2" Diameter
    3"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K4260000
    4"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K4270000
    5"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K4280000
    6"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K130000
    6"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T16100000
    7"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K4290000
    8"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K1030000
    9"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K230000
    10"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K1090000
    12"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K3300000
    12"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T16200000
    14"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K43100000
    15"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K33500000
    16"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K43200000
    18"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K4300000
    20"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K43300000
    24"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K5300000
    30"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K7900000
    36"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K6300000
    36"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T16300000
    48"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K7300000
    60"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K8300000
    72"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K9300000
    72"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T164000000
    84"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K21300000
    96"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K31400000
     
    5/8" Diameter
    3"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K4340000
    4"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K4350000
    5"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K4360000
    6"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K1110000
    6"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T18100000
    7"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K4370000
    8"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K1040000
    9"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K1210000
    10"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K11200000
    12"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K13100000
    12"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T18200000
    14"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K43800000
    15"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K12200000
    16"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K43900000
    18"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K14100000
    20"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K44100000
    24"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K15100000
    30"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K12300000
    36"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K16100000
    36"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T18300000
    48"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K17100000
    60"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K18100000
    72"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K19100000
    72"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T184000000
    84"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K21400000
    96"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K31600000
     
    3/4" Diameter
    3"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K4420000
    4"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K4430000
    5"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K4440000
    6"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K140000
    6"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T22100000
    7"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K44500000
    8"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K10500000
    9"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K2400000
    10"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K11300000
    12"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K3400000
    12"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T22200000
    14"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K44600000
    15"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K34500000
    16"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K44700000
    18"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K4400000
    20"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K44800000
    24"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K5400000
    30"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K54500000
    36"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K6400000
    36"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T223000000
    48"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K7400000
    60"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K8400000
    72"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K9400000
    72"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T224000000
    84"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K215000000
    96"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K317000000
     
    7/8" Diameter
    3"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K4490000
    4"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K4510000
    5"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K4520000
    6"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K33100000
    6"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T24100000
    7"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K45300000
    8"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K10600000
    9"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K33200000
    10"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K11400000
    12"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K33300000
    12"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T24200000
    14"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K45400000
    15"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K33400000
    16"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K45500000
    18"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K33600000
    20"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K45600000
    24"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K33700000
    30"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K33800000
    36"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K33900000
    36"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T243000000
    48"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K34200000
    60"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K34300000
    72"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K344000000
    72"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T244000000
    96"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K347000000
     
    1" Diameter
    3"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K6010000
    4"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K6020000
    5"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K60300000
    6"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K60400000
    6"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T26100000
    7"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K60500000
    8"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K60600000
    9"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K60700000
    10"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K60800000
    12"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K3500000
    12"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T26200000
    18"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K4500000
    24"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K5500000
    30"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K2500000
    36"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K6500000
    36"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T263000000
    48"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K7500000
    60"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K85000000
    72"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K95000000
    72"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T264000000
    84"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K216000000
    96"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K318000000
     
    1 1/8" Diameter
    3"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K6090000
    4"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K61100000
    5"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K61200000
    6"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K61300000
    6"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T28100000
    7"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K61400000
    8"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K61500000
    9"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K61600000
    12"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K35100000
    12"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T28200000
    18"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K35300000
    24"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K35400000
    30"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K35500000
    36"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K35600000
    36"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T283000000
    48"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K35800000
    60"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K359000000
    84"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K362000000
    96"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K363000000
     
    1 1/4" Diameter
    3"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K6180000
    4"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K61900000
    5"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K62100000
    6"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K62200000
    6"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T32100000
    7"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K62300000
    8"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K62400000
    9"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K62500000
    10"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K62600000
    12"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K3600000
    12"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T32200000
    18"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K4600000
    24"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K5600000
    30"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K1600000
    36"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K6600000
    36"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T323000000
    48"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K76000000
    60"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K86000000
    72"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K96000000
    72"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T324000000
    84"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K217000000
    96"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K319000000
     
    1 1/2" Diameter
    3"-0.0011" to -0.0006"Rockwell C60Extra Hard8——6061K62700000
    4"-0.0011" to -0.0006"Rockwell C60Extra Hard8——6061K62800000
    5"-0.0011" to -0.0006"Rockwell C60Extra Hard8——6061K62900000
    6"-0.0011" to -0.0006"Rockwell C60Extra Hard8——6061K63100000
    6"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T34100000
    7"-0.0011" to -0.0006"Rockwell C60Extra Hard8——6061K63200000
    8"-0.0011" to -0.0006"Rockwell C60Extra Hard8——6061K63300000
    9"-0.0011" to -0.0006"Rockwell C60Extra Hard8——6061K63400000
    10"-0.0011" to -0.0006"Rockwell C60Extra Hard8——6061K63500000
    12"-0.0011" to -0.0006"Rockwell C60Extra Hard8——6061K3700000
    12"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T34200000
    18"-0.0011" to -0.0006"Rockwell C60Extra Hard8——6061K4700000
    24"-0.0011" to -0.0006"Rockwell C60Extra Hard8——6061K5700000
    30"-0.0011" to -0.0006"Rockwell C60Extra Hard8——6061K1700000
    36"-0.0011" to -0.0006"Rockwell C60Extra Hard8——6061K6700000
    36"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T343000000
    48"-0.0011" to -0.0006"Rockwell C60Extra Hard8——6061K77000000
    60"-0.0011" to -0.0006"Rockwell C60Extra Hard8——6061K87000000
    72"-0.0011" to -0.0006"Rockwell C60Extra Hard8——6061K97000000
    72"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T344000000
    84"-0.0011" to -0.0006"Rockwell C60Extra Hard8——6061K218000000
    96"-0.0011" to -0.0006"Rockwell C60Extra Hard8——6061K321000000
     
    1 3/4" Diameter
    3"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K65400000
    4"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K63700000
    5"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K63800000
    6"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K63900000
    7"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K64100000
    8"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K64200000
    9"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K64300000
    10"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K64400000
    12"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K22100000
    18"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K22200000
    24"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K223000000
    30"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K224000000
    36"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K225000000
    48"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K227000000
    60"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K228000000
    72"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K229000000
    84"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K219000000
    96"-0.001" to -0.0005"Rockwell C60Extra Hard8——6061K322000000
     
    2" Diameter
    3"-0.0013" to -0.0006"Rockwell C60Extra Hard8——6061K65700000
    4"-0.0013" to -0.0006"Rockwell C60Extra Hard8——6061K65800000
    5"-0.0013" to -0.0006"Rockwell C60Extra Hard8——6061K64700000
    6"-0.0013" to -0.0006"Rockwell C60Extra Hard8——6061K64800000
    6"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T36100000
    7"-0.0013" to -0.0006"Rockwell C60Extra Hard8——6061K64900000
    8"-0.0013" to -0.0006"Rockwell C60Extra Hard8——6061K65100000
    9"-0.0013" to -0.0006"Rockwell C60Extra Hard8——6061K65200000
    10"-0.0013" to -0.0006"Rockwell C60Extra Hard8——6061K65300000
    12"-0.0013" to -0.0006"Rockwell C60Extra Hard8——6061K3800000
    12"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T362000000
    18"-0.0013" to -0.0006"Rockwell C60Extra Hard8——6061K48000000
    24"-0.0013" to -0.0006"Rockwell C60Extra Hard8——6061K58000000
    30"-0.0013" to -0.0006"Rockwell C60Extra Hard8——6061K18000000
    36"-0.0013" to -0.0006"Rockwell C60Extra Hard8——6061K68000000
    36"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T363000000
    48"-0.0013" to -0.0006"Rockwell C60Extra Hard8——6061K78000000
    60"-0.0013" to -0.0006"Rockwell C60Extra Hard8——6061K88000000
    72"-0.0013" to -0.0006"Rockwell C60Extra Hard8——6061K98000000
    72"-0.001" to 0"Rockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T364000000
    84"-0.0013" to -0.0006"Rockwell C60Extra Hard8——6061K311000000
    96"-0.0013" to -0.0006"Rockwell C60Extra Hard8——6061K323000000
     
    3 mm Diameter
    25 mm-0.012 mm to -0.004 mmRockwell C60Extra Hard16——5033N1100000
    50 mm-0.012 mm to -0.004 mmRockwell C60Extra Hard16——5033N10200000
    75 mm-0.012 mm to -0.004 mmRockwell C60Extra Hard16——5033N10300000
    100 mm-0.012 mm to -0.004 mmRockwell C60Extra Hard16——5033N10400000
    200 mm-0.008 mm to -0.002 mmRockwell C59Extra Hard16——6112K3100000
    400 mm-0.008 mm to -0.002 mmRockwell C59Extra Hard16——6112K1100000
     
    4 mm Diameter
    25 mm-0.012 mm to -0.004 mmRockwell C60Extra Hard16——5033N10600000
    50 mm-0.012 mm to -0.004 mmRockwell C60Extra Hard16——5033N10700000
    75 mm-0.012 mm to -0.004 mmRockwell C60Extra Hard16——5033N10800000
    150 mm-0.012 mm to -0.004 mmRockwell C60Extra Hard16——5033N11100000
    200 mm-0.008 mm to 0 mmRockwell C59Extra Hard12——6112K340000
    400 mm-0.008 mm to 0 mmRockwell C59Extra Hard12——6112K1200000
     
    5 mm Diameter
    25 mm-0.012 mm to -0.004 mmRockwell C60Extra Hard16——5033N11300000
    50 mm-0.012 mm to -0.004 mmRockwell C60Extra Hard16——5033N11400000
    100 mm-0.012 mm to -0.004 mmRockwell C60Extra Hard16——5033N11500000
    150 mm-0.012 mm to -0.004 mmRockwell C60Extra Hard16——5033N11600000
    200 mm-0.008 mm to 0 mmRockwell C59Extra Hard12——6112K3700000
    300 mm-0.012 mm to -0.004 mmRockwell C60Extra Hard16——5033N11800000
    400 mm-0.008 mm to 0 mmRockwell C59Extra Hard12——6112K3800000
    600 mm-0.008 mm to 0 mmRockwell C59Extra Hard12——6112K1300000
    800 mm-0.008 mm to 0 mmRockwell C59Extra Hard12——6112K3900000
    1,200 mm-0.008 mm to 0 mmRockwell C59Extra Hard12——6112K13200000
     
    6 mm Diameter
    25 mm-0.012 mm to -0.004 mmRockwell C60Extra Hard16——5033N11900000
    50 mm-0.012 mm to -0.004 mmRockwell C60Extra Hard16——5033N12100000
    100 mm-0.012 mm to -0.004 mmRockwell C60Extra Hard16——5033N12200000
    150 mm-0.012 mm to -0.004 mmRockwell C60Extra Hard16——5033N12300000
    200 mm-0.008 mm to 0 mmRockwell C59Extra Hard12——6112K410000
    300 mm-0.012 mm to -0.004 mmRockwell C60Extra Hard16——5033N12500000
    400 mm-0.008 mm to 0 mmRockwell C59Extra Hard12——6112K4200000
    600 mm-0.008 mm to 0 mmRockwell C59Extra Hard12——6112K1400000
    1,200 mm-0.008 mm to 0 mmRockwell C59Extra Hard12——6112K13400000
     
    8 mm Diameter
    25 mm-0.014 mm to -0.005 mmRockwell C60Extra Hard16——5033N12800000
    50 mm-0.014 mm to -0.005 mmRockwell C60Extra Hard16——5033N12900000
    100 mm-0.014 mm to -0.005 mmRockwell C60Extra Hard16——5033N13100000
    150 mm-0.014 mm to -0.005 mmRockwell C60Extra Hard16——5033N13200000
    200 mm-0.009 mm to 0 mmRockwell C59Extra Hard12——6112K440000
    300 mm-0.014 mm to -0.005 mmRockwell C60Extra Hard16——5033N13400000
    400 mm-0.009 mm to 0 mmRockwell C59Extra Hard12——6112K4500000
    600 mm-0.009 mm to 0 mmRockwell C59Extra Hard12——6112K4600000
    800 mm-0.009 mm to 0 mmRockwell C59Extra Hard12——6112K1500000
    1,200 mm-0.009 mm to 0 mmRockwell C59Extra Hard12——6112K13600000
     
    10 mm Diameter
    50 mm-0.014 mm to -0.005 mmRockwell C60Extra Hard16——5033N13900000
    100 mm-0.014 mm to -0.005 mmRockwell C60Extra Hard16——5033N14100000
    150 mm-0.014 mm to -0.005 mmRockwell C60Extra Hard16——5033N14200000
    200 mm-0.009 mm to 0 mmRockwell C59Extra Hard12——6112K1010000
    300 mm-0.014 mm to -0.005 mmRockwell C60Extra Hard16——5033N14400000
    400 mm-0.009 mm to 0 mmRockwell C59Extra Hard12——6112K10200000
    500 mm-0.009 mm to 0 mmRockwell C59Extra Hard12——6112K4700000
    800 mm-0.014 mm to -0.005 mmRockwell C60Extra Hard16——5033N148000000
    1,000 mm-0.009 mm to 0 mmRockwell C59Extra Hard12——6112K1600000
     
    12 mm Diameter
    50 mm-0.017 mm to -0.006 mmRockwell C60Extra Hard16——5033N14900000
    100 mm-0.017 mm to -0.006 mmRockwell C60Extra Hard16——5033N15100000
    152 mm-0.01 mm to 0 mmRockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T62100000
    200 mm-0.011 mm to 0 mmRockwell C59Extra Hard12——6112K1030000
    250 mm-0.01 mm to 0 mmRockwell C60Extra Hard8——6767N11300000
    305 mm-0.01 mm to 0 mmRockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T62200000
    400 mm-0.011 mm to 0 mmRockwell C59Extra Hard12——6112K10400000
    500 mm-0.011 mm to 0 mmRockwell C59Extra Hard12——6112K5200000
    750 mm-0.01 mm to 0 mmRockwell C60Extra Hard8——6767N11400000
    914 mm-0.01 mm to 0 mmRockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T62300000
    1,000 mm-0.011 mm to 0 mmRockwell C59Extra Hard12——6112K5300000
    1,200 mm-0.011 mm to 0 mmRockwell C59Extra Hard12——6112K1700000
    1,500 mm-0.011 mm to 0 mmRockwell C59Extra Hard12——6112K5400000
    1,829 mm-0.01 mm to 0 mmRockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T624000000
    2,000 mm-0.011 mm to 0 mmRockwell C59Extra Hard12——6112K5500000
     
    13 mm Diameter
    200 mm-0.017 mm to -0.006 mmRockwell C59Extra Hard16——6112K10500000
    400 mm-0.017 mm to -0.006 mmRockwell C59Extra Hard16——6112K10600000
    500 mm-0.017 mm to -0.006 mmRockwell C59Extra Hard16——6112K5600000
    1,000 mm-0.017 mm to -0.006 mmRockwell C59Extra Hard16——6112K5700000
    1,200 mm-0.017 mm to -0.006 mmRockwell C59Extra Hard16——6112K18000000
     
    15 mm Diameter
    200 mm-0.011 mm to 0 mmRockwell C59Extra Hard12——6112K20000
    400 mm-0.011 mm to 0 mmRockwell C59Extra Hard12——6112K400000
    500 mm-0.011 mm to 0 mmRockwell C59Extra Hard12——6112K600000
    1,000 mm-0.011 mm to 0 mmRockwell C59Extra Hard12——6112K9400000
    1,200 mm-0.011 mm to 0 mmRockwell C59Extra Hard12——6112K9500000
    1,500 mm-0.011 mm to 0 mmRockwell C59Extra Hard12——6112K9600000
    2,000 mm-0.011 mm to 0 mmRockwell C59Extra Hard12——6112K9700000
     
    16 mm Diameter
    100 mm-0.017 mm to -0.006 mmRockwell C60Extra Hard16——5033N16100000
    152 mm-0.01 mm to 0 mmRockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T64100000
    200 mm-0.011 mm to 0 mmRockwell C59Extra Hard12——6112K1070000
    250 mm-0.01 mm to 0 mmRockwell C60Extra Hard8——6767N11800000
    305 mm-0.01 mm to 0 mmRockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T64200000
    400 mm-0.011 mm to 0 mmRockwell C59Extra Hard12——6112K10800000
    500 mm-0.011 mm to 0 mmRockwell C59Extra Hard12——6112K6100000
    750 mm-0.01 mm to 0 mmRockwell C60Extra Hard8——6767N11700000
    914 mm-0.01 mm to 0 mmRockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T64300000
    1,000 mm-0.011 mm to 0 mmRockwell C59Extra Hard12——6112K6200000
    1,200 mm-0.011 mm to 0 mmRockwell C59Extra Hard12——6112K6300000
    1,500 mm-0.011 mm to 0 mmRockwell C59Extra Hard12——6112K6400000
    1,829 mm-0.01 mm to 0 mmRockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T644000000
    2,000 mm-0.011 mm to 0 mmRockwell C59Extra Hard12——6112K19000000
     
    20 mm Diameter
    100 mm-0.02 mm to -0.007 mmRockwell C60Extra Hard16——5033N17100000
    152 mm-0.012 mm to 0 mmRockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T66100000
    200 mm-0.013 mm to 0 mmRockwell C59Extra Hard12——6112K10900000
    250 mm-0.01 mm to 0 mmRockwell C60Extra Hard8——6767N12400000
    305 mm-0.012 mm to 0 mmRockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T66200000
    400 mm-0.013 mm to 0 mmRockwell C59Extra Hard12——6112K11100000
    500 mm-0.013 mm to 0 mmRockwell C59Extra Hard12——6112K6500000
    750 mm-0.01 mm to 0 mmRockwell C60Extra Hard8——6767N12600000
    914 mm-0.012 mm to 0 mmRockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T663000000
    1,000 mm-0.013 mm to 0 mmRockwell C59Extra Hard12——6112K6600000
    1,200 mm-0.013 mm to 0 mmRockwell C59Extra Hard12——6112K6700000
    1,500 mm-0.013 mm to 0 mmRockwell C59Extra Hard12——6112K6800000
    1,829 mm-0.012 mm to 0 mmRockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T664000000
    2,000 mm-0.013 mm to 0 mmRockwell C59Extra Hard12——6112K21000000
     
    24 mm Diameter
    200 mm-0.013 mm to 0 mmRockwell C59Extra Hard12——6112K5100000
    500 mm-0.013 mm to 0 mmRockwell C59Extra Hard12——6112K5800000
    1,000 mm-0.013 mm to 0 mmRockwell C59Extra Hard12——6112K59000000
    1,200 mm-0.013 mm to 0 mmRockwell C59Extra Hard12——6112K92000000
     
    25 mm Diameter
    152 mm-0.012 mm to 0 mmRockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T68100000
    200 mm-0.013 mm to 0 mmRockwell C59Extra Hard12——6112K11200000
    305 mm-0.012 mm to 0 mmRockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T68200000
    400 mm-0.02 mm to -0.007 mmRockwell C60Extra Hard16——5033N18300000
    500 mm-0.013 mm to 0 mmRockwell C59Extra Hard12——6112K6900000
    600 mm-0.02 mm to -0.007 mmRockwell C60Extra Hard16——5033N185000000
    750 mm-0.01 mm to 0 mmRockwell C60Extra Hard8——6767N13200000
    914 mm-0.012 mm to 0 mmRockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T683000000
    1,000 mm-0.013 mm to 0 mmRockwell C59Extra Hard12——6112K7100000
    1,200 mm-0.013 mm to 0 mmRockwell C59Extra Hard12——6112K7200000
    1,500 mm-0.013 mm to 0 mmRockwell C59Extra Hard12——6112K73000000
    1,829 mm-0.012 mm to 0 mmRockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T684000000
    2,000 mm-0.013 mm to 0 mmRockwell C59Extra Hard12——6112K22000000
    2,500 mm-0.013 mm to 0 mmRockwell C59Extra Hard12——6112K32000000
     
    30 mm Diameter
    100 mm-0.02 mm to -0.007 mmRockwell C60Extra Hard16——5033N19100000
    200 mm-0.013 mm to 0 mmRockwell C59Extra Hard12——6112K11400000
    300 mm-0.02 mm to -0.007 mmRockwell C60Extra Hard16——5033N19400000
    400 mm-0.02 mm to -0.007 mmRockwell C60Extra Hard16——5033N19500000
    500 mm-0.013 mm to 0 mmRockwell C59Extra Hard12——6112K7400000
    750 mm-0.01 mm to 0 mmRockwell C60Extra Hard8——6767N13900000
    1,000 mm-0.013 mm to 0 mmRockwell C59Extra Hard12——6112K75000000
    1,200 mm-0.013 mm to 0 mmRockwell C59Extra Hard12——6112K76000000
    1,500 mm-0.013 mm to 0 mmRockwell C59Extra Hard12——6112K77000000
    2,000 mm-0.013 mm to 0 mmRockwell C59Extra Hard12——6112K23000000
    2,500 mm-0.013 mm to 0 mmRockwell C59Extra Hard12——6112K33000000
     
    35 mm Diameter
    200 mm-0.016 mm to 0 mmRockwell C59Extra Hard12——6112K11600000
    500 mm-0.016 mm to 0 mmRockwell C59Extra Hard12——6112K7800000
    1,000 mm-0.016 mm to 0 mmRockwell C59Extra Hard12——6112K79000000
    1,200 mm-0.016 mm to 0 mmRockwell C59Extra Hard12——6112K81000000
    1,500 mm-0.016 mm to 0 mmRockwell C59Extra Hard12——6112K82000000
    2,000 mm-0.016 mm to 0 mmRockwell C59Extra Hard12——6112K24000000
     
    40 mm Diameter
    200 mm-0.016 mm to 0 mmRockwell C59Extra Hard12——6112K11800000
    500 mm-0.016 mm to 0 mmRockwell C59Extra Hard12——6112K8300000
    750 mm-0.01 mm to 0 mmRockwell C60Extra Hard8——6767N144000000
    1,000 mm-0.016 mm to 0 mmRockwell C59Extra Hard12——6112K84000000
    1,200 mm-0.016 mm to 0 mmRockwell C59Extra Hard12——6112K85000000
    1,500 mm-0.016 mm to 0 mmRockwell C59Extra Hard12——6112K86000000
    2,000 mm-0.016 mm to 0 mmRockwell C59Extra Hard12——6112K25000000
    2,500 mm-0.016 mm to 0 mmRockwell C59Extra Hard12——6112K36000000
     
    50 mm Diameter
    152 mm-0.015 mm to 0 mmRockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T72100000
    200 mm-0.016 mm to 0 mmRockwell C59Extra Hard12——6112K12100000
    305 mm-0.015 mm to 0 mmRockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T722000000
    500 mm-0.016 mm to 0 mmRockwell C59Extra Hard12——6112K87000000
    914 mm-0.015 mm to 0 mmRockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T723000000
    1,000 mm-0.016 mm to 0 mmRockwell C59Extra Hard12——6112K88000000
    1,200 mm-0.016 mm to 0 mmRockwell C59Extra Hard12——6112K89000000
    1,500 mm-0.016 mm to 0 mmRockwell C59Extra Hard12——6112K91000000
    1,829 mm-0.015 mm to 0 mmRockwell C60Extra Hard10Material Certificate
    		Digital
    		1555T724000000
    2,000 mm-0.016 mm to 0 mmRockwell C59Extra Hard12——6112K26000000
    2,500 mm-0.016 mm to 0 mmRockwell C59Extra Hard12——6112K5000000
     
    Chrome-Plated Steel
     
    1/2" Diameter
    6"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K2100000
    12"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K2200000
    18"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K2300000
    24"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K2400000
    36"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K2500000
    48"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K26000000
    60"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K27000000
    72"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K28000000
     
    5/8" Diameter
    6"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K1100000
    12"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K1200000
    18"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K1300000
    24"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K1400000
    36"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K15000000
    48"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K16000000
    60"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K17000000
    72"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K18000000
     
    3/4" Diameter
    6"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K3100000
    12"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K3200000
    18"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K3300000
    24"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K3400000
    36"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K35000000
    48"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K36000000
    60"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K37000000
    72"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K38000000
     
    1" Diameter
    6"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K4100000
    12"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K4200000
    18"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K4300000
    24"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K44000000
    36"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K45000000
    48"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K46000000
    60"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K47000000
    72"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K48000000
     
    1 1/4" Diameter
    6"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K6100000
    12"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K6200000
    18"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K63000000
    24"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K64000000
    36"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K65000000
    48"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K66000000
    60"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K67000000
    72"-0.001" to -0.0005"Rockwell C60Extra Hard8——60345K68000000
     
    1 1/2" Diameter
    6"-0.0011" to -0.0006"Rockwell C60Extra Hard8——60345K5100000
    12"-0.0011" to -0.0006"Rockwell C60Extra Hard8——60345K5200000
    18"-0.0011" to -0.0006"Rockwell C60Extra Hard8——60345K53000000
    24"-0.0011" to -0.0006"Rockwell C60Extra Hard8——60345K54000000
    36"-0.0011" to -0.0006"Rockwell C60Extra Hard8——60345K55000000
    48"-0.0011" to -0.0006"Rockwell C60Extra Hard8——60345K56000000
    60"-0.0011" to -0.0006"Rockwell C60Extra Hard8——60345K57000000
    72"-0.0011" to -0.0006"Rockwell C60Extra Hard8——60345K58000000
     
    Highly Wear-Resistant 440C Stainless Steel
     
    1/8" Diameter
    6"-0.0005" to -0.0002"Rockwell C56Extra Hard16——6253K4900000
    12"-0.0005" to -0.0002"Rockwell C56Extra Hard16——6253K5900000
     
    3/16" Diameter
    6"-0.0005" to -0.0002"Rockwell C56Extra Hard16——6253K8100000
    12"-0.0005" to -0.0002"Rockwell C56Extra Hard16——6253K8200000
     
    1/4" Diameter
    6"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K1100000
    12"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K1200000
    18"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K1300000
    24"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K1400000
    36"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K15000000
    48"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K16000000
    60"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K17000000
     
    3/8" Diameter
    6"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K3100000
    12"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K3200000
    18"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K3300000
    24"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K3400000
    36"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K35000000
    48"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K36000000
    60"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K18000000
     
    1/2" Diameter
    6"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K5100000
    12"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K5200000
    18"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K5300000
    24"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K2100000
    36"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K54000000
    48"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K41000000
    60"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K19000000
     
    5/8" Diameter
    6"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K5500000
    12"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K5600000
    18"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K5700000
    24"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K22000000
    36"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K58000000
    48"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K42000000
    60"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K28000000
     
    3/4" Diameter
    6"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K6100000
    12"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K6200000
    18"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K63000000
    24"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K23000000
    36"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K64000000
    48"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K43000000
    60"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K29000000
     
    1" Diameter
    6"-0.001" to -0.0005"Rockwell C52Extra Hard16——6253K9100000
    12"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K6500000
    18"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K66000000
    24"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K24000000
    36"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K67000000
    48"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K44000000
    60"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K37000000
     
    1 1/4" Diameter
    6"-0.001" to -0.0005"Rockwell C52Extra Hard16——6253K9200000
    12"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K71000000
    18"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K72000000
    24"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K25000000
    36"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K73000000
    48"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K45000000
    60"-0.001" to -0.0005"Rockwell C50Extra Hard8——6253K38000000
     
    1 1/2" Diameter
    6"-0.0011" to -0.0006"Rockwell C52Extra Hard16——6253K9300000
    12"-0.0011" to -0.0006"Rockwell C50Extra Hard8——6253K74000000
    18"-0.0011" to -0.0006"Rockwell C50Extra Hard8——6253K75000000
    24"-0.0011" to -0.0006"Rockwell C50Extra Hard8——6253K26000000
    36"-0.0011" to -0.0006"Rockwell C50Extra Hard8——6253K76000000
    48"-0.0011" to -0.0006"Rockwell C50Extra Hard8——6253K46000000
    60"-0.0011" to -0.0006"Rockwell C50Extra Hard8——6253K39000000
     
    2" Diameter
    6"-0.0013" to -0.0006"Rockwell C52Extra Hard16——6253K94000000
    12"-0.0013" to -0.0006"Rockwell C50Extra Hard8——6253K77000000
    18"-0.0013" to -0.0006"Rockwell C50Extra Hard8——6253K78000000
    24"-0.0013" to -0.0006"Rockwell C50Extra Hard8——6253K27000000
    36"-0.0013" to -0.0006"Rockwell C50Extra Hard8——6253K7900000000
    48"-0.0013" to -0.0006"Rockwell C50Extra Hard8——6253K4700000000
    60"-0.0013" to -0.0006"Rockwell C50Extra Hard8——6253K4800000000
     
    Highly Wear-Resistant 420 Stainless Steel
     
    6 mm Diameter
    100 mm-0.008 mm to 0 mmRockwell C52Extra Hard12——6459K1170000
    200 mm-0.008 mm to 0 mmRockwell C52Extra Hard12——6459K100000
    400 mm-0.008 mm to 0 mmRockwell C52Extra Hard12——6459K200000
    600 mm-0.008 mm to 0 mmRockwell C52Extra Hard12——6459K400000
    800 mm-0.008 mm to 0 mmRockwell C52Extra Hard12——6459K500000
    1,000 mm-0.008 mm to 0 mmRockwell C52Extra Hard12——6459K600000
    1,200 mm-0.008 mm to 0 mmRockwell C52Extra Hard12——6459K700000
     
    8 mm Diameter
    100 mm-0.009 mm to 0 mmRockwell C52Extra Hard12——6459K1180000
    200 mm-0.009 mm to 0 mmRockwell C52Extra Hard12——6459K11100000
    400 mm-0.009 mm to 0 mmRockwell C52Extra Hard12——6459K11200000
    600 mm-0.009 mm to 0 mmRockwell C52Extra Hard12——6459K11300000
    800 mm-0.009 mm to 0 mmRockwell C52Extra Hard12——6459K11400000
    1,000 mm-0.009 mm to 0 mmRockwell C52Extra Hard12——6459K11500000
    1,200 mm-0.009 mm to 0 mmRockwell C52Extra Hard12——6459K11600000
     
    10 mm Diameter
    100 mm-0.009 mm to 0 mmRockwell C52Extra Hard12——6459K1190000
    200 mm-0.009 mm to 0 mmRockwell C52Extra Hard12——6459K1200000
    400 mm-0.009 mm to 0 mmRockwell C52Extra Hard12——6459K1300000
    600 mm-0.009 mm to 0 mmRockwell C52Extra Hard12——6459K1500000
    800 mm-0.009 mm to 0 mmRockwell C52Extra Hard12——6459K1600000
    1,000 mm-0.009 mm to 0 mmRockwell C52Extra Hard12——6459K1700000
    1,200 mm-0.009 mm to 0 mmRockwell C52Extra Hard12——6459K18000000
     
    12 mm Diameter
    100 mm-0.011 mm to 0 mmRockwell C52Extra Hard12——6459K1210000
    150 mm-0.011 mm to 0 mmRockwell C52Extra Hard12——6459K12200000
    200 mm-0.011 mm to 0 mmRockwell C52Extra Hard12——6459K2300000
    400 mm-0.011 mm to 0 mmRockwell C52Extra Hard12——6459K2400000
    600 mm-0.011 mm to 0 mmRockwell C52Extra Hard12——6459K2600000
    800 mm-0.011 mm to 0 mmRockwell C52Extra Hard12——6459K2700000
    1,000 mm-0.011 mm to 0 mmRockwell C52Extra Hard12——6459K2800000
    1,200 mm-0.011 mm to 0 mmRockwell C52Extra Hard12——6459K2900000
     
    15 mm Diameter
    200 mm-0.011 mm to 0 mmRockwell C52Extra Hard12——6459K3400000
    400 mm-0.011 mm to 0 mmRockwell C52Extra Hard12——6459K3500000
    600 mm-0.011 mm to 0 mmRockwell C52Extra Hard12——6459K3700000
    800 mm-0.011 mm to 0 mmRockwell C52Extra Hard12——6459K3800000
    1,000 mm-0.011 mm to 0 mmRockwell C52Extra Hard12——6459K3900000
    1,200 mm-0.011 mm to 0 mmRockwell C52Extra Hard12——6459K41000000
     
    16 mm Diameter
    200 mm-0.011 mm to 0 mmRockwell C52Extra Hard12——6459K4500000
    400 mm-0.011 mm to 0 mmRockwell C52Extra Hard12——6459K4600000
    600 mm-0.011 mm to 0 mmRockwell C52Extra Hard12——6459K4800000
    800 mm-0.011 mm to 0 mmRockwell C52Extra Hard12——6459K4900000
    1,000 mm-0.011 mm to 0 mmRockwell C52Extra Hard12——6459K51000000
    1,200 mm-0.011 mm to 0 mmRockwell C52Extra Hard12——6459K52000000
     
    20 mm Diameter
    500 mm-0.013 mm to 0 mmRockwell C52Extra Hard12——6459K5800000
    600 mm-0.013 mm to 0 mmRockwell C52Extra Hard12——6459K5900000
    800 mm-0.013 mm to 0 mmRockwell C52Extra Hard12——6459K6100000
    1,000 mm-0.013 mm to 0 mmRockwell C52Extra Hard12——6459K62000000
    1,200 mm-0.013 mm to 0 mmRockwell C52Extra Hard12——6459K63000000
    1,500 mm-0.013 mm to 0 mmRockwell C52Extra Hard12——6459K64000000
     
    25 mm Diameter
    500 mm-0.013 mm to 0 mmRockwell C52Extra Hard12——6459K6900000
    600 mm-0.013 mm to 0 mmRockwell C52Extra Hard12——6459K7100000
    800 mm-0.013 mm to 0 mmRockwell C52Extra Hard12——6459K72000000
    1,000 mm-0.013 mm to 0 mmRockwell C52Extra Hard12——6459K73000000
    1,200 mm-0.013 mm to 0 mmRockwell C52Extra Hard12——6459K74000000
    1,500 mm-0.013 mm to 0 mmRockwell C52Extra Hard12——6459K75000000
     
    30 mm Diameter
    500 mm-0.013 mm to 0 mmRockwell C52Extra Hard12——6459K81000000
    600 mm-0.013 mm to 0 mmRockwell C52Extra Hard12——6459K82000000
    800 mm-0.013 mm to 0 mmRockwell C52Extra Hard12——6459K83000000
    1,000 mm-0.013 mm to 0 mmRockwell C52Extra Hard12——6459K84000000
    1,200 mm-0.013 mm to 0 mmRockwell C52Extra Hard12——6459K85000000
    1,500 mm-0.013 mm to 0 mmRockwell C52Extra Hard12——6459K86000000
     
    40 mm Diameter
    500 mm-0.016 mm to 0 mmRockwell C52Extra Hard12——6459K92000000
    600 mm-0.016 mm to 0 mmRockwell C52Extra Hard12——6459K93000000
    800 mm-0.016 mm to 0 mmRockwell C52Extra Hard12——6459K94000000
    1,000 mm-0.016 mm to 0 mmRockwell C52Extra Hard12——6459K95000000
    1,200 mm-0.016 mm to 0 mmRockwell C52Extra Hard12——6459K96000000
    1,500 mm-0.016 mm to 0 mmRockwell C52Extra Hard12——6459K97000000
     
    50 mm Diameter
    500 mm-0.016 mm to 0 mmRockwell C52Extra Hard12——6459K103000000
     
    Corrosion-Resistant 17-4 PH Stainless Steel
     
    1/32" Diameter
    2"-0.0002" to 0"Rockwell C40Hard10——1162K8500000
    6"-0.0002" to 0"Rockwell C40Hard10——1162K1100000
    12"-0.0002" to 0"Rockwell C40Hard10——1162K1200000
    18"-0.0002" to 0"Rockwell C40Hard10——1162K1300000
     
    3/64" Diameter
    2"-0.0002" to 0"Rockwell C40Hard10——1162K8900000
    3"-0.0002" to 0"Rockwell C40Hard10——1162K9100000
    4"-0.0002" to 0"Rockwell C40Hard10——1162K9200000
    6"-0.0002" to 0"Rockwell C40Hard10——1162K1400000
    12"-0.0002" to 0"Rockwell C40Hard10——1162K1500000
    24"-0.0002" to 0"Rockwell C40Hard10——1162K1700000
     
    1/16" Diameter
    2"-0.0002" to 0"Rockwell C40Hard10——1162K9400000
    3"-0.0002" to 0"Rockwell C40Hard10——1162K9500000
    4"-0.0002" to 0"Rockwell C40Hard10——1162K9600000
    5"-0.0002" to 0"Rockwell C40Hard10——1162K9700000
    6"-0.0002" to 0"Rockwell C40Hard10——1162K1800000
    12"-0.0002" to 0"Rockwell C40Hard10——1162K1900000
    18"-0.0002" to 0"Rockwell C40Hard10——1162K2100000
    24"-0.0002" to 0"Rockwell C40Hard10——1162K2200000
    36"-0.0002" to 0"Rockwell C40Hard10——1162K2400000
     
    5/64" Diameter
    2"-0.0002" to 0"Rockwell C40Hard10——1162K9800000
    3"-0.0002" to 0"Rockwell C40Hard10——1162K9900000
    4"-0.0002" to 0"Rockwell C40Hard10——1162K10100000
    6"-0.0002" to 0"Rockwell C40Hard10——1162K2500000
    12"-0.0002" to 0"Rockwell C40Hard10——1162K2600000
    18"-0.0002" to 0"Rockwell C40Hard10——1162K2700000
    24"-0.0002" to 0"Rockwell C40Hard10——1162K2800000
    36"-0.0002" to 0"Rockwell C40Hard10——1162K3100000
     
    3/32" Diameter
    2"-0.0002" to 0"Rockwell C40Hard10——1162K10300000
    3"-0.0002" to 0"Rockwell C40Hard10——1162K10400000
    4"-0.0002" to 0"Rockwell C40Hard10——1162K10500000
    5"-0.0002" to 0"Rockwell C40Hard10——1162K10600000
    6"-0.0002" to 0"Rockwell C40Hard10——1162K3200000
    12"-0.0002" to 0"Rockwell C40Hard10——1162K3300000
    18"-0.0002" to 0"Rockwell C40Hard10——1162K3400000
    24"-0.0002" to 0"Rockwell C40Hard10——1162K3500000
    36"-0.0002" to 0"Rockwell C40Hard10——1162K3700000
     
    1/8" Diameter
    2"-0.0002" to 0"Rockwell C40Hard10——1162K10700000
    3"-0.0002" to 0"Rockwell C40Hard10——1162K10800000
    4"-0.0002" to 0"Rockwell C40Hard10——1162K10900000
    5"-0.0002" to 0"Rockwell C40Hard10——1162K11100000
    6"-0.0002" to 0"Rockwell C40Hard10——1162K3800000
    12"-0.0002" to 0"Rockwell C40Hard10——1162K3900000
    18"-0.0002" to 0"Rockwell C40Hard10——1162K4100000
    24"-0.0002" to 0"Rockwell C40Hard10——1162K4200000
    36"-0.0002" to 0"Rockwell C40Hard10——1162K4400000
     
    5/32" Diameter
    2"-0.0002" to 0"Rockwell C40Hard10——1162K11200000
    3"-0.0002" to 0"Rockwell C40Hard10——1162K11300000
    4"-0.0002" to 0"Rockwell C40Hard10——1162K11400000
    6"-0.0002" to 0"Rockwell C40Hard10——1162K4500000
    12"-0.0002" to 0"Rockwell C40Hard10——1162K4600000
    18"-0.0002" to 0"Rockwell C40Hard10——1162K4700000
    24"-0.0002" to 0"Rockwell C40Hard10——1162K4800000
    36"-0.0002" to 0"Rockwell C40Hard10——1162K51000000
     
    3/16" Diameter
    2"-0.0002" to 0"Rockwell C40Hard10——1162K11600000
    3"-0.0002" to 0"Rockwell C40Hard10——1162K11700000
    4"-0.0002" to 0"Rockwell C40Hard10——1162K11800000
    5"-0.0002" to 0"Rockwell C40Hard10——1162K11900000
    6"-0.0002" to 0"Rockwell C40Hard10——1162K5200000
    12"-0.0002" to 0"Rockwell C40Hard10——1162K5300000
    18"-0.0002" to 0"Rockwell C40Hard10——1162K5400000
    24"-0.0002" to 0"Rockwell C40Hard10——1162K5500000
    36"-0.0002" to 0"Rockwell C40Hard10——1162K5700000
     
    7/32" Diameter
    2"-0.0002" to 0"Rockwell C40Hard10——1162K12100000
    3"-0.0002" to 0"Rockwell C40Hard10——1162K12200000
    4"-0.0002" to 0"Rockwell C40Hard10——1162K12300000
    5"-0.0002" to 0"Rockwell C40Hard10——1162K12400000
    6"-0.0002" to 0"Rockwell C40Hard10——1162K5800000
    12"-0.0002" to 0"Rockwell C40Hard10——1162K5900000
    18"-0.0002" to 0"Rockwell C40Hard10——1162K6100000
    24"-0.0002" to 0"Rockwell C40Hard10——1162K6200000
    36"-0.0002" to 0"Rockwell C40Hard10——1162K6400000
     
    1/4" Diameter
    2"-0.0002" to 0"Rockwell C40Hard10——1162K12500000
    3"-0.0002" to 0"Rockwell C40Hard10——1162K12600000
    4"-0.0002" to 0"Rockwell C40Hard10——1162K12700000
    5"-0.0002" to 0"Rockwell C40Hard10——1162K12800000
    6"-0.0002" to 0"Rockwell C40Hard10——1162K6500000
    12"-0.0002" to 0"Rockwell C40Hard10——1162K6600000
    18"-0.0002" to 0"Rockwell C40Hard10——1162K6700000
    24"-0.0002" to 0"Rockwell C40Hard10——1162K6800000
    36"-0.0002" to 0"Rockwell C40Hard10——1162K7100000
     
    5/16" Diameter
    2"-0.0002" to 0"Rockwell C40Hard10——1162K12900000
    3"-0.0002" to 0"Rockwell C40Hard10——1162K13100000
    4"-0.0002" to 0"Rockwell C40Hard10——1162K13200000
    5"-0.0002" to 0"Rockwell C40Hard10——1162K13300000
    6"-0.0002" to 0"Rockwell C40Hard10——1162K7200000
    12"-0.0002" to 0"Rockwell C40Hard10——1162K7300000
    18"-0.0002" to 0"Rockwell C40Hard10——1162K7400000
    24"-0.0002" to 0"Rockwell C40Hard10——1162K7500000
    36"-0.0002" to 0"Rockwell C40Hard10——1162K77000000
     
    3/8" Diameter
    2"-0.0002" to 0"Rockwell C40Hard10——1162K13400000
    3"-0.0002" to 0"Rockwell C40Hard10——1162K13500000
    4"-0.0002" to 0"Rockwell C40Hard10——1162K13600000
    5"-0.0002" to 0"Rockwell C40Hard10——1162K13700000
    6"-0.0002" to 0"Rockwell C40Hard10——1162K7800000
    12"-0.0002" to 0"Rockwell C40Hard10——1162K7900000
    18"-0.0002" to 0"Rockwell C40Hard10——1162K8100000
    24"-0.0002" to 0"Rockwell C40Hard10——1162K8200000
    36"-0.0002" to 0"Rockwell C40Hard10——1162K84000000
     
    1 mm Diameter
    100 mm-0.005 mm to 0 mmRockwell C40Hard10——1174K5100000
    300 mm-0.005 mm to 0 mmRockwell C40Hard10——1174K1200000
     
    1.5 mm Diameter
    300 mm-0.005 mm to 0 mmRockwell C40Hard10——1174K1500000
    600 mm-0.005 mm to 0 mmRockwell C40Hard10——1174K1700000
     
    2 mm Diameter
    100 mm-0.005 mm to 0 mmRockwell C40Hard10——1174K520000
    300 mm-0.005 mm to 0 mmRockwell C40Hard10——1174K1900000
    600 mm-0.005 mm to 0 mmRockwell C40Hard10——1174K2200000
    900 mm-0.005 mm to 0 mmRockwell C40Hard10——1174K2400000
     
    2.5 mm Diameter
    300 mm-0.005 mm to 0 mmRockwell C40Hard10——1174K2600000
    600 mm-0.005 mm to 0 mmRockwell C40Hard10——1174K2800000
    900 mm-0.005 mm to 0 mmRockwell C40Hard10——1174K3100000
     
    3 mm Diameter
    100 mm-0.005 mm to 0 mmRockwell C40Hard10——1174K5300000
    300 mm-0.005 mm to 0 mmRockwell C40Hard10——1174K3300000
    600 mm-0.005 mm to 0 mmRockwell C40Hard10——1174K3500000
    900 mm-0.005 mm to 0 mmRockwell C40Hard10——1174K3700000
     
    4 mm Diameter
    100 mm-0.005 mm to 0 mmRockwell C40Hard10——1174K5400000
    300 mm-0.005 mm to 0 mmRockwell C40Hard10——1174K3900000
    600 mm-0.005 mm to 0 mmRockwell C40Hard10——1174K4200000
    900 mm-0.005 mm to 0 mmRockwell C40Hard10——1174K4400000
     
    5 mm Diameter
    100 mm-0.005 mm to 0 mmRockwell C40Hard10——1174K5500000
    200 mm-0.005 mm to 0 mmRockwell C40Hard10——1174K5600000
    300 mm-0.005 mm to 0 mmRockwell C40Hard10——1174K5700000
     
    Lightweight Ceramic-Coated Aluminum
     
    1/4" Diameter
    6"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K6100000
    9"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K6200000
    12"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K6300000
    15"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K6400000
    18"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K6500000
    24"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K6600000
    36"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K6700000
    48"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K6800000
     
    3/8" Diameter
    6"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K7100000
    9"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K7200000
    12"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K7300000
    15"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K7400000
    18"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K7500000
    24"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K7600000
    36"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K7700000
    48"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K7800000
     
    1/2" Diameter
    6"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K1100000
    9"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K1200000
    12"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K1300000
    15"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K1400000
    18"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K1500000
    24"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K1600000
    36"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K1700000
    48"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K1800000
     
    3/4" Diameter
    6"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K2100000
    9"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K2200000
    12"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K2300000
    15"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K2400000
    18"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K2500000
    24"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K2600000
    36"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K27000000
    48"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K28000000
     
    1" Diameter
    6"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K3100000
    9"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K3200000
    12"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K3300000
    15"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K3400000
    18"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K3500000
    24"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K3600000
    36"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K37000000
    48"-0.0012" to -0.0004"Rockwell C70Ultra Hard12——1031K38000000
     
    1 1/2" Diameter
    6"-0.0013" to -0.0005"Rockwell C70Ultra Hard12——1031K4100000
    9"-0.0013" to -0.0005"Rockwell C70Ultra Hard12——1031K4200000
    12"-0.0013" to -0.0005"Rockwell C70Ultra Hard12——1031K4300000
    15"-0.0013" to -0.0005"Rockwell C70Ultra Hard12——1031K4400000
    18"-0.0013" to -0.0005"Rockwell C70Ultra Hard12——1031K4500000
    24"-0.0013" to -0.0005"Rockwell C70Ultra Hard12——1031K46000000
     
    2" Diameter
    6"-0.0015" to -0.0005"Rockwell C70Ultra Hard12——1031K5100000
    12"-0.0015" to -0.0005"Rockwell C70Ultra Hard12——1031K53000000
    15"-0.0015" to -0.0005"Rockwell C70Ultra Hard12——1031K54000000
    24"-0.0015" to -0.0005"Rockwell C70Ultra Hard12——1031K56000000
     
    Lightweight Anodized Aluminum
     
    1/4" Diameter
    18"-0.001" to -0.0005"Rockwell C70Ultra Hard16——5911K3100000
    48"-0.001" to -0.0005"Rockwell C70Ultra Hard16——5911K61000000
     
    3/8" Diameter
    6"-0.001" to -0.0005"Rockwell C70Ultra Hard16——5911K1200000
     
    1 1/4" Diameter
    18"-0.001" to -0.0005"Rockwell C70Ultra Hard16——5911K37000000
     

    Tapped Linear Shafts

    Mount directly with studs, bolts, and other threaded fasteners—no shaft supports needed. Pair with linear bearings to create smooth, precise motion. These shafts are turned, ground, and polished to tight tolerances and hardened to resist wear.
    Tapped on One End
    Image of Product. Front orientation. ZoomedIn view. Contains MultipleImages. Linear Shafts. Tapped Linear Shafts, Tapped on One End.
    Image of Attribute. Front orientation. ZoomedIn view. Contains Annotated. Linear Shafts. Tapped Linear Shafts, Tapped on One End.
    Steel—Stronger than aluminum and stainless steel. These shafts are best for dry environments since moisture will cause them to rust.
    Highly Wear-Resistant 440C Stainless Steel—Balancing strength, wear resistance, and corrosion resistance, these shafts can handle moisture and mild cleaning solutions.
    Surface Smoothness—The lower the microinch value, the smoother the finish and the less friction it will cause on the bearing.
    Thread
    Lg.
    Dia. Tolerance
    Thread Size
    Lg.
    Hardness
    Hardness
    Rating
    Surface Smoothness,
    μin
    Each
    Steel
     
    3/8" Diameter
    6"-0.0006" to -0.0002"8-32
    		0.328"Rockwell C60Extra Hard166649K276000000
    8"-0.0006" to -0.0002"8-32
    		0.328"Rockwell C60Extra Hard166649K28500000
    9"-0.0006" to -0.0002"8-32
    		0.328"Rockwell C60Extra Hard166649K28600000
    10"-0.0006" to -0.0002"8-32
    		0.328"Rockwell C60Extra Hard166649K30500000
    12"-0.0006" to -0.0002"8-32
    		0.328"Rockwell C60Extra Hard166649K32100000
    18"-0.0006" to -0.0002"8-32
    		0.328"Rockwell C60Extra Hard166649K32900000
    24"-0.0006" to -0.0002"8-32
    		0.328"Rockwell C60Extra Hard166649K35600000
    36"-0.0006" to -0.0002"8-32
    		0.328"Rockwell C60Extra Hard166649K36600000
     
    1/2" Diameter
    6"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K52900000
    8"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K53300000
    9"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K54600000
    10"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K54800000
    12"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K55300000
    18"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K56600000
    24"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K57900000
    36"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K59900000
     
    5/8" Diameter
    6"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K68200000
    8"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K68600000
    9"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K69100000
    10"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K69800000
    12"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K70500000
    18"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K72400000
    24"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K73300000
    36"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K73500000
     
    3/4" Diameter
    6"-0.0008" to -0.0003"5/16"-18
    		5/8"Rockwell C60Extra Hard166649K74400000
    8"-0.0008" to -0.0003"5/16"-18
    		5/8"Rockwell C60Extra Hard166649K75700000
    9"-0.0008" to -0.0003"5/16"-18
    		5/8"Rockwell C60Extra Hard166649K75800000
    10"-0.0008" to -0.0003"5/16"-18
    		5/8"Rockwell C60Extra Hard166649K76600000
    12"-0.0008" to -0.0003"5/16"-18
    		5/8"Rockwell C60Extra Hard166649K77100000
    18"-0.0008" to -0.0003"5/16"-18
    		5/8"Rockwell C60Extra Hard166649K79300000
    24"-0.0008" to -0.0003"5/16"-18
    		5/8"Rockwell C60Extra Hard166649K79400000
    36"-0.0008" to -0.0003"5/16"-18
    		5/8"Rockwell C60Extra Hard166649K79700000
     
    1" Diameter
    6"-0.0008" to -0.0003"3/8"-16
    		3/4"Rockwell C60Extra Hard166649K80300000
    8"-0.0008" to -0.0003"3/8"-16
    		3/4"Rockwell C60Extra Hard166649K80900000
    9"-0.0008" to -0.0003"3/8"-16
    		3/4"Rockwell C60Extra Hard166649K81300000
    10"-0.0008" to -0.0003"3/8"-16
    		3/4"Rockwell C60Extra Hard166649K83700000
    12"-0.0008" to -0.0003"3/8"-16
    		3/4"Rockwell C60Extra Hard166649K85400000
    18"-0.0008" to -0.0003"3/8"-16
    		3/4"Rockwell C60Extra Hard166649K85800000
    24"-0.0008" to -0.0003"3/8"-16
    		3/4"Rockwell C60Extra Hard166649K89300000
    36"-0.0008" to -0.0003"3/8"-16
    		3/4"Rockwell C60Extra Hard166649K89600000
     
    1 1/4" Diameter
    6"-0.001" to -0.0004"1/2"-13
    		1"Rockwell C60Extra Hard166649K90100000
    8"-0.001" to -0.0004"1/2"-13
    		1"Rockwell C60Extra Hard166649K90400000
    9"-0.001" to -0.0004"1/2"-13
    		1"Rockwell C60Extra Hard166649K90600000
    10"-0.001" to -0.0004"1/2"-13
    		1"Rockwell C60Extra Hard166649K91500000
    12"-0.001" to -0.0004"1/2"-13
    		1"Rockwell C60Extra Hard166649K91900000
    18"-0.001" to -0.0004"1/2"-13
    		1"Rockwell C60Extra Hard166649K92600000
    24"-0.001" to -0.0004"1/2"-13
    		1"Rockwell C60Extra Hard166649K94200000
    36"-0.001" to -0.0004"1/2"-13
    		1"Rockwell C60Extra Hard166649K943000000
     
    6 mm Diameter
    50 mm-0.012 mm to -0.004 mmM3 × 0.5 mm6 mmRockwell C60Extra Hard165562N10100000
    100 mm-0.012 mm to -0.004 mmM3 × 0.5 mm6 mmRockwell C60Extra Hard165562N10200000
    150 mm-0.012 mm to -0.004 mmM3 × 0.5 mm6 mmRockwell C60Extra Hard165562N10300000
    300 mm-0.012 mm to -0.004 mmM3 × 0.5 mm6 mmRockwell C60Extra Hard165562N10500000
     
    8 mm Diameter
    50 mm-0.014 mm to -0.005 mmM4 × 0.7 mm8 mmRockwell C60Extra Hard165562N10800000
    100 mm-0.014 mm to -0.005 mmM4 × 0.7 mm8 mmRockwell C60Extra Hard165562N10900000
    150 mm-0.014 mm to -0.005 mmM4 × 0.7 mm8 mmRockwell C60Extra Hard165562N1100000
    200 mm-0.014 mm to -0.005 mmM4 × 0.7 mm8 mmRockwell C60Extra Hard165562N11100000
    300 mm-0.014 mm to -0.005 mmM4 × 0.7 mm8 mmRockwell C60Extra Hard165562N11200000
     
    10 mm Diameter
    50 mm-0.014 mm to -0.005 mmM5 × 0.8 mm10 mmRockwell C60Extra Hard165562N11600000
    100 mm-0.014 mm to -0.005 mmM5 × 0.8 mm10 mmRockwell C60Extra Hard165562N11700000
    150 mm-0.014 mm to -0.005 mmM5 × 0.8 mm10 mmRockwell C60Extra Hard165562N11800000
    200 mm-0.014 mm to -0.005 mmM5 × 0.8 mm10 mmRockwell C60Extra Hard165562N11900000
    300 mm-0.014 mm to -0.005 mmM5 × 0.8 mm10 mmRockwell C60Extra Hard165562N1200000
    500 mm-0.014 mm to -0.005 mmM5 × 0.8 mm10 mmRockwell C60Extra Hard165562N12200000
     
    12 mm Diameter
    50 mm-0.017 mm to -0.006 mmM6 × 1 mm12 mmRockwell C60Extra Hard165562N12500000
    100 mm-0.017 mm to -0.006 mmM6 × 1 mm12 mmRockwell C60Extra Hard165562N12600000
    150 mm-0.017 mm to -0.006 mmM6 × 1 mm12 mmRockwell C60Extra Hard165562N12700000
    200 mm-0.017 mm to -0.006 mmM6 × 1 mm12 mmRockwell C60Extra Hard165562N12800000
    300 mm-0.017 mm to -0.006 mmM6 × 1 mm12 mmRockwell C60Extra Hard165562N12900000
     
    16 mm Diameter
    50 mm-0.017 mm to -0.006 mmM8 × 1.25 mm16 mmRockwell C60Extra Hard165562N14700000
    100 mm-0.017 mm to -0.006 mmM8 × 1.25 mm16 mmRockwell C60Extra Hard165562N14800000
    150 mm-0.017 mm to -0.006 mmM8 × 1.25 mm16 mmRockwell C60Extra Hard165562N14900000
    200 mm-0.017 mm to -0.006 mmM8 × 1.25 mm16 mmRockwell C60Extra Hard165562N1500000
    300 mm-0.017 mm to -0.006 mmM8 × 1.25 mm16 mmRockwell C60Extra Hard165562N15100000
    500 mm-0.017 mm to -0.006 mmM8 × 1.25 mm16 mmRockwell C60Extra Hard165562N153000000
    1,000 mm-0.017 mm to -0.006 mmM8 × 1.25 mm16 mmRockwell C60Extra Hard165562N156000000
     
    20 mm Diameter
    100 mm-0.02 mm to -0.007 mmM10 × 1.5 mm20 mmRockwell C60Extra Hard165562N15800000
    150 mm-0.02 mm to -0.007 mmM10 × 1.5 mm20 mmRockwell C60Extra Hard165562N15900000
    300 mm-0.02 mm to -0.007 mmM10 × 1.5 mm20 mmRockwell C60Extra Hard165562N16100000
    400 mm-0.02 mm to -0.007 mmM10 × 1.5 mm20 mmRockwell C60Extra Hard165562N162000000
     
    25 mm Diameter
    100 mm-0.02 mm to -0.007 mmM12 × 1.75 mm24 mmRockwell C60Extra Hard165562N16900000
    150 mm-0.02 mm to -0.007 mmM12 × 1.75 mm24 mmRockwell C60Extra Hard165562N1700000
    200 mm-0.02 mm to -0.007 mmM12 × 1.75 mm24 mmRockwell C60Extra Hard165562N17100000
    400 mm-0.02 mm to -0.007 mmM12 × 1.75 mm24 mmRockwell C60Extra Hard165562N173000000
     
    30 mm Diameter
    400 mm-0.02 mm to -0.007 mmM16 × 2 mm32 mmRockwell C60Extra Hard165562N184000000
    1,200 mm-0.02 mm to -0.007 mmM16 × 2 mm32 mmRockwell C60Extra Hard165562N189000000
     
    Highly Wear-Resistant 440C Stainless Steel
     
    1/2" Diameter
    6"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C56Extra Hard161240K37300000
    9"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C56Extra Hard161240K37600000
    12"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C56Extra Hard161240K38500000
    18"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C56Extra Hard161240K39300000
    24"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C56Extra Hard161240K449000000
    36"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C56Extra Hard161240K451000000
     
    5/8" Diameter
    6"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C56Extra Hard161240K47300000
    9"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C56Extra Hard161240K51400000
    12"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C56Extra Hard161240K51900000
    18"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C56Extra Hard161240K535000000
    24"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C56Extra Hard161240K545000000
    36"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C56Extra Hard161240K554000000
     
    3/4" Diameter
    6"-0.0008" to -0.0003"5/16"-18
    		5/8"Rockwell C56Extra Hard161240K70100000
    9"-0.0008" to -0.0003"5/16"-18
    		5/8"Rockwell C56Extra Hard161240K78900000
    12"-0.0008" to -0.0003"5/16"-18
    		5/8"Rockwell C56Extra Hard161240K793000000
    18"-0.0008" to -0.0003"5/16"-18
    		5/8"Rockwell C56Extra Hard161240K803000000
    24"-0.0008" to -0.0003"5/16"-18
    		5/8"Rockwell C56Extra Hard161240K806000000
    36"-0.0008" to -0.0003"5/16"-18
    		5/8"Rockwell C56Extra Hard161240K817000000
     
    1" Diameter
    6"-0.0008" to -0.0003"3/8"-16
    		3/4"Rockwell C56Extra Hard161240K83800000
    9"-0.0008" to -0.0003"3/8"-16
    		3/4"Rockwell C56Extra Hard161240K845000000
    12"-0.0008" to -0.0003"3/8"-16
    		3/4"Rockwell C56Extra Hard161240K848000000
    18"-0.0008" to -0.0003"3/8"-16
    		3/4"Rockwell C56Extra Hard161240K858000000
    24"-0.0008" to -0.0003"3/8"-16
    		3/4"Rockwell C56Extra Hard161240K878000000
    36"-0.0008" to -0.0003"3/8"-16
    		3/4"Rockwell C56Extra Hard161240K879000000
     
    1 1/4" Diameter
    6"-0.001" to -0.0004"1/2"-13
    		1"Rockwell C56Extra Hard161240K893000000
    12"-0.001" to -0.0004"1/2"-13
    		1"Rockwell C56Extra Hard161240K897000000
    18"-0.001" to -0.0004"1/2"-13
    		1"Rockwell C56Extra Hard161240K898000000
    36"-0.001" to -0.0004"1/2"-13
    		1"Rockwell C56Extra Hard161240K963000000
     
    Tapped on Both Ends
    Image of Product. Front orientation. ZoomedIn view. Contains MultipleImages. Linear Shafts. Tapped Linear Shafts, Tapped on Both Ends.
    Image of Attribute. Front orientation. ZoomedIn view. Contains Annotated. Linear Shafts. Tapped Linear Shafts, Tapped on Both Ends.
    Steel—Stronger than aluminum and stainless steel. These shafts are best for dry environments since moisture will cause them to rust.
    Highly Wear-Resistant 440C Stainless Steel—Balancing strength, wear resistance, and corrosion resistance, these shafts can handle moisture and mild cleaning solutions.
    Surface Smoothness—The lower the microinch value, the smoother the finish and the less friction it will cause on the bearing.
    Thread
    Lg.
    Dia. Tolerance
    Thread Size
    Lg.
    Hardness
    Hardness
    Rating
    Surface Smoothness,
    μin
    Each
    Steel
     
    3/8" Diameter
    6"-0.0006" to -0.0002"8-32
    		21/64"Rockwell C60Extra Hard166649K369000000
    8"-0.0006" to -0.0002"8-32
    		21/64"Rockwell C60Extra Hard166649K37400000
    9"-0.0006" to -0.0002"8-32
    		21/64"Rockwell C60Extra Hard166649K38600000
    10"-0.0006" to -0.0002"8-32
    		21/64"Rockwell C60Extra Hard166649K39200000
    12"-0.0006" to -0.0002"8-32
    		21/64"Rockwell C60Extra Hard166649K39600000
    18"-0.0006" to -0.0002"8-32
    		21/64"Rockwell C60Extra Hard166649K39700000
    24"-0.0006" to -0.0002"8-32
    		21/64"Rockwell C60Extra Hard166649K40100000
    36"-0.0006" to -0.0002"8-32
    		21/64"Rockwell C60Extra Hard166649K40500000
     
    1/2" Diameter
    6"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K14200000
    8"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K14500000
    9"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K14600000
    10"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K16500000
    12"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K45900000
    18"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K51700000
    24"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K52800000
    36"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K62500000
     
    5/8" Diameter
    6"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K74200000
    8"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K19100000
    9"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K19700000
    10"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K19800000
    12"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K79900000
    18"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K89800000
    24"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K94700000
    36"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C60Extra Hard166649K21800000
     
    3/4" Diameter
    6"-0.0008" to -0.0003"5/16"-18
    		5/8"Rockwell C60Extra Hard166649K26400000
    8"-0.0008" to -0.0003"5/16"-18
    		5/8"Rockwell C60Extra Hard166649K19900000
    9"-0.0008" to -0.0003"5/16"-18
    		5/8"Rockwell C60Extra Hard166649K20100000
    10"-0.0008" to -0.0003"5/16"-18
    		5/8"Rockwell C60Extra Hard166649K21600000
    12"-0.0008" to -0.0003"5/16"-18
    		5/8"Rockwell C60Extra Hard166649K35700000
    18"-0.0008" to -0.0003"5/16"-18
    		5/8"Rockwell C60Extra Hard166649K41200000
    24"-0.0008" to -0.0003"5/16"-18
    		5/8"Rockwell C60Extra Hard166649K42900000
    36"-0.0008" to -0.0003"5/16"-18
    		5/8"Rockwell C60Extra Hard166649K43200000
     
    1" Diameter
    6"-0.0008" to -0.0003"3/8"-16
    		3/4"Rockwell C60Extra Hard166649K43300000
    8"-0.0008" to -0.0003"3/8"-16
    		3/4"Rockwell C60Extra Hard166649K22500000
    9"-0.0008" to -0.0003"3/8"-16
    		3/4"Rockwell C60Extra Hard166649K22800000
    10"-0.0008" to -0.0003"3/8"-16
    		3/4"Rockwell C60Extra Hard166649K22900000
    12"-0.0008" to -0.0003"3/8"-16
    		3/4"Rockwell C60Extra Hard166649K43700000
    18"-0.0008" to -0.0003"3/8"-16
    		3/4"Rockwell C60Extra Hard166649K44400000
    24"-0.0008" to -0.0003"3/8"-16
    		3/4"Rockwell C60Extra Hard166649K46200000
    36"-0.0008" to -0.0003"3/8"-16
    		3/4"Rockwell C60Extra Hard166649K463000000
     
    1 1/4" Diameter
    6"-0.001" to -0.0004"1/2"-13
    		1"Rockwell C60Extra Hard166649K46400000
    8"-0.001" to -0.0004"1/2"-13
    		1"Rockwell C60Extra Hard166649K24500000
    9"-0.001" to -0.0004"1/2"-13
    		1"Rockwell C60Extra Hard166649K24700000
    10"-0.001" to -0.0004"1/2"-13
    		1"Rockwell C60Extra Hard166649K25300000
    12"-0.001" to -0.0004"1/2"-13
    		1"Rockwell C60Extra Hard166649K46900000
    18"-0.001" to -0.0004"1/2"-13
    		1"Rockwell C60Extra Hard166649K47900000
    24"-0.001" to -0.0004"1/2"-13
    		1"Rockwell C60Extra Hard166649K486000000
    36"-0.001" to -0.0004"1/2"-13
    		1"Rockwell C60Extra Hard166649K496000000
     
    6 mm Diameter
    50 mm-0.012 mm to -0.004 mmM3 × 0.5 mm6 mmRockwell C60Extra Hard164316N10100000
    100 mm-0.012 mm to -0.004 mmM3 × 0.5 mm6 mmRockwell C60Extra Hard164316N10200000
    150 mm-0.012 mm to -0.004 mmM3 × 0.5 mm6 mmRockwell C60Extra Hard164316N10300000
    200 mm-0.012 mm to -0.004 mmM3 × 0.5 mm6 mmRockwell C60Extra Hard164316N10400000
     
    8 mm Diameter
    50 mm-0.014 mm to -0.005 mmM4 × 0.7 mm8 mmRockwell C60Extra Hard164316N10800000
    100 mm-0.014 mm to -0.005 mmM4 × 0.7 mm8 mmRockwell C60Extra Hard164316N10900000
    200 mm-0.014 mm to -0.005 mmM4 × 0.7 mm8 mmRockwell C60Extra Hard164316N11100000
    300 mm-0.014 mm to -0.005 mmM4 × 0.7 mm8 mmRockwell C60Extra Hard164316N11200000
     
    10 mm Diameter
    50 mm-0.014 mm to -0.005 mmM5 × 0.8 mm10 mmRockwell C60Extra Hard164316N11600000
    150 mm-0.014 mm to -0.005 mmM5 × 0.8 mm10 mmRockwell C60Extra Hard164316N11800000
    400 mm-0.014 mm to -0.005 mmM5 × 0.8 mm10 mmRockwell C60Extra Hard164316N121000000
     
    12 mm Diameter
    100 mm-0.017 mm to -0.006 mmM6 × 1 mm12 mmRockwell C60Extra Hard164316N12600000
    150 mm-0.017 mm to -0.006 mmM6 × 1 mm12 mmRockwell C60Extra Hard164316N12700000
     
    16 mm Diameter
    50 mm-0.017 mm to -0.006 mmM8 × 1.25 mm16 mmRockwell C60Extra Hard164316N14700000
    100 mm-0.017 mm to -0.006 mmM8 × 1.25 mm16 mmRockwell C60Extra Hard164316N14800000
    150 mm-0.017 mm to -0.006 mmM8 × 1.25 mm16 mmRockwell C60Extra Hard164316N14900000
    200 mm-0.017 mm to -0.006 mmM8 × 1.25 mm16 mmRockwell C60Extra Hard164316N1500000
    500 mm-0.017 mm to -0.006 mmM8 × 1.25 mm16 mmRockwell C60Extra Hard164316N153000000
     
    20 mm Diameter
    200 mm-0.02 mm to -0.007 mmM10 × 1.5 mm20 mmRockwell C60Extra Hard164316N1600000
    300 mm-0.02 mm to -0.007 mmM10 × 1.5 mm20 mmRockwell C60Extra Hard164316N161000000
     
    25 mm Diameter
    200 mm-0.02 mm to -0.007 mmM12 × 1.75 mm24 mmRockwell C60Extra Hard164316N17100000
    Tapped Linear Motion Shaft, Tapped on Both Ends, 52100 Steel, 25mm Diameter, 200mm Long
    EachIn stock
     
    Highly Wear-Resistant 440C Stainless Steel
     
    1/2" Diameter
    6"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C56Extra Hard161240K10400000
    9"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C56Extra Hard161240K10100000
    12"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C56Extra Hard161240K12900000
    18"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C56Extra Hard161240K143000000
    24"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C56Extra Hard161240K149000000
    36"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C56Extra Hard161240K163000000
     
    5/8" Diameter
    6"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C56Extra Hard161240K17300000
    9"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C56Extra Hard161240K19800000
    12"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C56Extra Hard161240K184000000
    18"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C56Extra Hard161240K188000000
    24"-0.0007" to -0.0002"1/4"-20
    		1/2"Rockwell C56Extra Hard161240K191000000
     
    3/4" Diameter
    6"-0.0008" to -0.0003"5/16"-18
    		5/8"Rockwell C56Extra Hard161240K20100000
    9"-0.0008" to -0.0003"5/16"-18
    		5/8"Rockwell C56Extra Hard161240K287000000
    12"-0.0008" to -0.0003"5/16"-18
    		5/8"Rockwell C56Extra Hard161240K218000000
    18"-0.0008" to -0.0003"5/16"-18
    		5/8"Rockwell C56Extra Hard161240K237000000
    24"-0.0008" to -0.0003"5/16"-18
    		5/8"Rockwell C56Extra Hard161240K239000000
    36"-0.0008" to -0.0003"5/16"-18
    		5/8"Rockwell C56Extra Hard161240K248000000
     
    1" Diameter
    6"-0.0008" to -0.0003"3/8"-16
    		3/4"Rockwell C56Extra Hard161240K252000000
    9"-0.0008" to -0.0003"3/8"-16
    		3/4"Rockwell C56Extra Hard161240K368000000
    12"-0.0008" to -0.0003"3/8"-16
    		3/4"Rockwell C56Extra Hard161240K274000000
    18"-0.0008" to -0.0003"3/8"-16
    		3/4"Rockwell C56Extra Hard161240K275000000
    24"-0.0008" to -0.0003"3/8"-16
    		3/4"Rockwell C56Extra Hard161240K291000000
    36"-0.0008" to -0.0003"3/8"-16
    		3/4"Rockwell C56Extra Hard161240K327000000
     
    1 1/4" Diameter
    6"-0.001" to -0.0004"1/2"-13
    		1"Rockwell C56Extra Hard161240K332000000
    9"-0.001" to -0.0004"1/2"-13
    		1"Rockwell C56Extra Hard161240K372000000
    12"-0.001" to -0.0004"1/2"-13
    		1"Rockwell C56Extra Hard161240K342000000
    18"-0.001" to -0.0004"1/2"-13
    		1"Rockwell C56Extra Hard161240K344000000
    24"-0.001" to -0.0004"1/2"-13
    		1"Rockwell C56Extra Hard161240K346000000
    36"-0.001" to -0.0004"1/2"-13
    		1"Rockwell C56Extra Hard161240K348000000
     

    Support-Rail Shafts

    Image of Product. Front orientation. Linear Shafts. Support-Rail Shafts.
    Attached support rails prevent bending or bearing misalignment under moderate to heavy loads. Pair with linear bearings to create smooth, precise motion. These linear shafts are turned, ground, and polished to tight tolerances and hardened to resist wear.
    Steel—Stronger than aluminum and stainless steel. These shafts are best for dry environments since moisture will cause them to rust.
    Highly Wear-Resistant 440C Stainless Steel—Balancing strength, wear resistance, and corrosion resistance, these shafts can handle moisture and mild cleaning solutions.
    Lightweight Ceramic-Coated Aluminum—Lightweight and corrosion resistant with an ultra-hard, slippery ceramic coating for wear resistance. Even contaminants such as weld spatter, molten glass, and paint won't stick to these shafts. While the coating is hard, they have a soft core, so they should be used with linear sleeve bearings to avoid denting the shaft.
    Surface Smoothness—The lower the microinch value, the smoother the finish and the less friction it will cause on the bearing.
    Shafts
    Replacement
    Shafts
    Lg.
    Dia. Tolerance
    Ctr.
    Ht.
    Overall
    Wd.
    Mounting
    Hole Dia.
    Hardness
    Hardness
    Rating
    Surface Smoothness,
    μin
    Support Rail
    Material
    Each
    Each
    Steel
     
    1/2" Diameter
    24"-0.001" to -0.0005"1 1/8"1 1/2"5/32"Rockwell C60Extra Hard86061 Aluminum
    		59585K8300000006499K530000000
    48"-0.001" to -0.0005"1 1/8"1 1/2"5/32"Rockwell C60Extra Hard86061 Aluminum
    		59585K530000006499K73000000
     
    5/8" Diameter
    24"-0.001" to -0.0005"1 1/8"1 5/8"3/16"Rockwell C60Extra Hard86061 Aluminum
    		59585K890000006499K59000000
    48"-0.001" to -0.0005"1 1/8"1 5/8"3/16"Rockwell C60Extra Hard86061 Aluminum
    		59585K590000006499K79000000
     
    3/4" Diameter
    24"-0.001" to -0.0005"1 1/2"1 3/4"7/32"Rockwell C60Extra Hard86061 Aluminum
    		59585K840000006499K54000000
    48"-0.001" to -0.0005"1 1/2"1 3/4"7/32"Rockwell C60Extra Hard86061 Aluminum
    		59585K540000006499K74000000
     
    1" Diameter
    24"-0.001" to -0.0005"1 3/4"2 1/8"9/32"Rockwell C60Extra Hard86061 Aluminum
    		59585K850000006499K55000000
    48"-0.001" to -0.0005"1 3/4"2 1/8"9/32"Rockwell C60Extra Hard86061 Aluminum
    		59585K550000006499K75000000
     
    1 1/4" Diameter
    24"-0.001" to -0.0005"2 1/8"2 1/2"11/32"Rockwell C60Extra Hard86061 Aluminum
    		59585K860000006499K56000000
    48"-0.001" to -0.0005"2 1/8"2 1/2"11/32"Rockwell C60Extra Hard86061 Aluminum
    		59585K560000006499K76000000
     
    1 1/2" Diameter
    24"-0.0011" to -0.0006"2 1/2"3"11/32"Rockwell C60Extra Hard86061 Aluminum
    		59585K870000006499K57000000
    48"-0.0011" to -0.0006"2 1/2"3"11/32"Rockwell C60Extra Hard86061 Aluminum
    		59585K570000006499K77000000
     
    12 mm Diameter
    600 mm-0.011 mm to 0 mm28 mm43 mm4.5 mmRockwell C60Extra Hard126063 Aluminum
    		59585K71000000———0
    1,200 mm-0.011 mm to 0 mm28 mm43 mm4.5 mmRockwell C60Extra Hard126063 Aluminum
    		59585K91000000———0
     
    16 mm Diameter
    600 mm-0.011 mm to 0 mm30 mm48 mm5.5 mmRockwell C60Extra Hard126063 Aluminum
    		59585K11000000———0
    1,200 mm-0.011 mm to 0 mm30 mm48 mm5.5 mmRockwell C60Extra Hard126063 Aluminum
    		59585K12000000———0
     
    20 mm Diameter
    600 mm-0.013 mm to 0 mm38 mm56 mm6.6 mmRockwell C60Extra Hard126063 Aluminum
    		59585K13000000———0
    1,200 mm-0.013 mm to 0 mm38 mm56 mm6.6 mmRockwell C60Extra Hard126063 Aluminum
    		59585K14000000———0
     
    25 mm Diameter
    1,200 mm-0.013 mm to 0 mm42 mm60 mm6.6 mmRockwell C60Extra Hard126063 Aluminum
    		59585K94000000———0
     
    30 mm Diameter
    1,200 mm-0.013 mm to 0 mm53 mm74 mm9 mmRockwell C60Extra Hard126063 Aluminum
    		59585K16000000———0
     
    Highly Wear-Resistant 440C Stainless Steel
     
    1/2" Diameter
    24"-0.001" to -0.0005"1 1/8"1 1/2"5/32"Rockwell C50Extra Hard86061 Aluminum
    		6557K210000006526K53000000
    48"-0.001" to -0.0005"1 1/8"1 1/2"5/32"Rockwell C50Extra Hard86061 Aluminum
    		6557K310000006526K73000000
     
    5/8" Diameter
    24"-0.001" to -0.0005"1 1/8"1 5/8"3/16"Rockwell C50Extra Hard86061 Aluminum
    		6557K220000006526K59000000
    48"-0.001" to -0.0005"1 1/8"1 5/8"3/16"Rockwell C50Extra Hard86061 Aluminum
    		6557K320000006526K79000000
     
    3/4" Diameter
    24"-0.001" to -0.0005"1 1/2"1 3/4"7/32"Rockwell C50Extra Hard86061 Aluminum
    		6557K230000006526K54000000
    48"-0.001" to -0.0005"1 1/2"1 3/4"7/32"Rockwell C50Extra Hard86061 Aluminum
    		6557K330000006526K74000000
     
    1" Diameter
    24"-0.001" to -0.0005"1 3/4"2 1/8"9/32"Rockwell C50Extra Hard86061 Aluminum
    		6557K240000006526K55000000
    48"-0.001" to -0.0005"1 3/4"2 1/8"9/32"Rockwell C50Extra Hard86061 Aluminum
    		6557K340000006526K75000000
     
    1 1/4" Diameter
    24"-0.001" to -0.0005"2 1/8"2 1/2"11/32"Rockwell C50Extra Hard86061 Aluminum
    		6557K250000006526K56000000
    48"-0.001" to -0.0005"2 1/8"2 1/2"11/32"Rockwell C50Extra Hard86061 Aluminum
    		6557K3500000000———0
     
    1 1/2" Diameter
    24"-0.0011" to -0.0006"2 1/2"3"11/32"Rockwell C50Extra Hard86061 Aluminum
    		6557K26000000———0
    48"-0.0011" to -0.0006"2 1/2"3"11/32"Rockwell C50Extra Hard86061 Aluminum
    		6557K36000000006526K77000000
     
    Lightweight Ceramic-Coated Aluminum
     
    1/2" Diameter
    6"-0.0012" to -0.0004"1 1/8"1 1/2"5/32"Rockwell C70Ultra Hard126063 Aluminum
    		1049K1100000———0
    9"-0.0012" to -0.0004"1 1/8"1 1/2"5/32"Rockwell C70Ultra Hard126063 Aluminum
    		1049K1200000———0
    12"-0.0012" to -0.0004"1 1/8"1 1/2"5/32"Rockwell C70Ultra Hard126063 Aluminum
    		1049K1300000———0
    18"-0.0012" to -0.0004"1 1/8"1 1/2"5/32"Rockwell C70Ultra Hard126063 Aluminum
    		1049K14000000———0
    24"-0.0012" to -0.0004"1 1/8"1 1/2"5/32"Rockwell C70Ultra Hard126063 Aluminum
    		1049K15000000———0
     
    3/4" Diameter
    6"-0.0012" to -0.0004"1 1/2"1 3/4"7/32"Rockwell C70Ultra Hard126063 Aluminum
    		1049K2100000———0
    9"-0.0012" to -0.0004"1 1/2"1 3/4"7/32"Rockwell C70Ultra Hard126063 Aluminum
    		1049K2200000———0
    12"-0.0012" to -0.0004"1 1/2"1 3/4"7/32"Rockwell C70Ultra Hard126063 Aluminum
    		1049K23000000———0
    18"-0.0012" to -0.0004"1 1/2"1 3/4"7/32"Rockwell C70Ultra Hard126063 Aluminum
    		1049K24000000———0
    24"-0.0012" to -0.0004"1 1/2"1 3/4"7/32"Rockwell C70Ultra Hard126063 Aluminum
    		1049K25000000———0
     
    1" Diameter
    6"-0.0012" to -0.0004"1 3/4"2 1/8"9/32"Rockwell C70Ultra Hard126063 Aluminum
    		1049K3100000———0
    9"-0.0012" to -0.0004"1 3/4"2 1/8"9/32"Rockwell C70Ultra Hard126063 Aluminum
    		1049K3200000———0
    12"-0.0012" to -0.0004"1 3/4"2 1/8"9/32"Rockwell C70Ultra Hard126063 Aluminum
    		1049K33000000———0
    18"-0.0012" to -0.0004"1 3/4"2 1/8"9/32"Rockwell C70Ultra Hard126063 Aluminum
    		1049K34000000———0
    24"-0.0012" to -0.0004"1 3/4"2 1/8"9/32"Rockwell C70Ultra Hard126063 Aluminum
    		1049K35000000———0
     

    Threaded Linear Shafts

    Screw the end of these shafts into a tapped hole, eliminating the need to mount them with additional shaft supports. You can also attach a nut to mount them. Pair these shafts with linear bearings to create smooth, precise motion. They are turned, ground, and polished to tight tolerances and hardened to resist wear.
    Threaded on One End
    Image of Product. Front orientation. ZoomedIn view. Contains MultipleImages. Linear Shafts. Threaded Linear Shafts, Threaded on One End.
    Image of Attribute. Front orientation. Contains Annotated. Linear Shafts. Threaded Linear Shafts, Threaded on One End.
    Steel—Stronger than aluminum and stainless steel. These shafts are best for dry environments since moisture will cause them to rust.
    Surface Smoothness—The lower the microinch value, the smoother the finish and the less friction it will cause on the bearing.
    Thread
    Lg.
    Dia. Tolerance
    Thread Size
    Lg.
    Step
    Length
    Hardness
    Hardness
    Rating
    Surface Smoothness,
    μin
    Each
    Steel
     
    3/8" Diameter
    6 1/2"-0.0006" to -0.0002"1/4"-20
    		19/64"1/2"Rockwell C60Extra Hard168350T65000000
    8 1/2"-0.0006" to -0.0002"1/4"-20
    		19/64"1/2"Rockwell C60Extra Hard168350T7200000
    12 1/2"-0.0006" to -0.0002"1/4"-20
    		19/64"1/2"Rockwell C60Extra Hard168350T8100000
    24 1/2"-0.0006" to -0.0002"1/4"-20
    		19/64"1/2"Rockwell C60Extra Hard168350T8900000
     
    1/2" Diameter
    6 5/8"-0.0007" to -0.0002"5/16"-18
    		3/8"5/8"Rockwell C60Extra Hard168350T6600000
    8 5/8"-0.0007" to -0.0002"5/16"-18
    		3/8"5/8"Rockwell C60Extra Hard168350T7300000
    12 5/8"-0.0007" to -0.0002"5/16"-18
    		3/8"5/8"Rockwell C60Extra Hard168350T8200000
    24 5/8"-0.0007" to -0.0002"5/16"-18
    		3/8"5/8"Rockwell C60Extra Hard168350T9100000
     
    5/8" Diameter
    6 3/4"-0.0007" to -0.0002"3/8"-16
    		15/32"3/4"Rockwell C60Extra Hard168350T6700000
    8 3/4"-0.0007" to -0.0002"3/8"-16
    		15/32"3/4"Rockwell C60Extra Hard168350T7400000
    12 3/4"-0.0007" to -0.0002"3/8"-16
    		15/32"3/4"Rockwell C60Extra Hard168350T8300000
    24 3/4"-0.0007" to -0.0002"3/8"-16
    		15/32"3/4"Rockwell C60Extra Hard168350T9200000
     
    3/4" Diameter
    7"-0.0008" to -0.0003"1/2"-13
    		5/8"1"Rockwell C60Extra Hard168350T6800000
    9"-0.0008" to -0.0003"1/2"-13
    		5/8"1"Rockwell C60Extra Hard168350T7500000
    13"-0.0008" to -0.0003"1/2"-13
    		5/8"1"Rockwell C60Extra Hard168350T8400000
    25"-0.0008" to -0.0003"1/2"-13
    		5/8"1"Rockwell C60Extra Hard168350T9300000
     
    1" Diameter
    7 1/4"-0.0008" to -0.0003"5/8"-11
    		49/64"1 1/4"Rockwell C60Extra Hard168350T6900000
    9 1/4"-0.0008" to -0.0003"5/8"-11
    		49/64"1 1/4"Rockwell C60Extra Hard168350T7600000
    13 1/4"-0.0008" to -0.0003"5/8"-11
    		49/64"1 1/4"Rockwell C60Extra Hard168350T8500000
    25 1/4"-0.0008" to -0.0003"5/8"-11
    		49/64"1 1/4"Rockwell C60Extra Hard168350T9400000
     
    6 mm Diameter
    50 mm-0.012 mm to -0.004 mmM4 × 0.7 mm5 mm8 mmRockwell C60Extra Hard165599N1100000
    100 mm-0.012 mm to -0.004 mmM4 × 0.7 mm5 mm8 mmRockwell C60Extra Hard165599N11200000
    150 mm-0.012 mm to -0.004 mmM4 × 0.7 mm5 mm8 mmRockwell C60Extra Hard165599N11300000
     
    8 mm Diameter
    100 mm-0.014 mm to -0.005 mmM5 × 0.8 mm6 mm10 mmRockwell C60Extra Hard165599N11900000
    150 mm-0.014 mm to -0.005 mmM5 × 0.8 mm6 mm10 mmRockwell C60Extra Hard165599N12100000
     
    10 mm Diameter
    50 mm-0.014 mm to -0.005 mmM6 × 1 mm8 mm12 mmRockwell C60Extra Hard165599N12700000
    100 mm-0.014 mm to -0.005 mmM6 × 1 mm8 mm12 mmRockwell C60Extra Hard165599N12800000
    150 mm-0.014 mm to -0.005 mmM6 × 1 mm8 mm12 mmRockwell C60Extra Hard165599N12900000
    200 mm-0.014 mm to -0.005 mmM6 × 1 mm8 mm12 mmRockwell C60Extra Hard165599N13100000
     
    12 mm Diameter
    100 mm-0.017 mm to -0.006 mmM8 × 1.25 mm10 mm16 mmRockwell C60Extra Hard165599N13700000
    150 mm-0.017 mm to -0.006 mmM8 × 1.25 mm10 mm16 mmRockwell C60Extra Hard165599N13800000
    200 mm-0.017 mm to -0.006 mmM8 × 1.25 mm10 mm16 mmRockwell C60Extra Hard165599N13900000
    500 mm-0.017 mm to -0.006 mmM8 × 1.25 mm10 mm16 mmRockwell C60Extra Hard165599N143000000
     
    16 mm Diameter
    100 mm-0.017 mm to -0.006 mmM10 × 1.5 mm12 mm20 mmRockwell C60Extra Hard165599N15900000
    200 mm-0.017 mm to -0.006 mmM10 × 1.5 mm12 mm20 mmRockwell C60Extra Hard165599N16200000
    500 mm-0.017 mm to -0.006 mmM10 × 1.5 mm12 mm20 mmRockwell C60Extra Hard165599N165000000
     
    20 mm Diameter
    150 mm-0.02 mm to -0.007 mmM12 × 1.75 mm15 mm24 mmRockwell C60Extra Hard165599N17100000
    300 mm-0.02 mm to -0.007 mmM12 × 1.75 mm15 mm24 mmRockwell C60Extra Hard165599N17300000
     
    Threaded on Both Ends
    Image of Product. Front orientation. ZoomedIn view. Contains MultipleImages. Linear Shafts. Threaded Linear Shafts, Threaded on Both Ends.
    Image of Attribute. Front orientation. Contains Annotated. Linear Shafts. Threaded Linear Shafts, Threaded on Both Ends.
    Steel—Stronger than aluminum and stainless steel. These shafts are best for dry environments since moisture will cause them to rust.
    Surface Smoothness—The lower the microinch value, the smoother the finish and the less friction it will cause on the bearing.
    Thread
    Lg.
    Dia. Tolerance
    Thread
    Size
    Lg.
    Step
    Length
    Hardness
    Hardness
    Rating
    Surface Smoothness,
    μin
    Each
    Steel
     
    3/8" Diameter
    7"-0.0006" to -0.0002"1/4"-20
    		19/64"1/2"Rockwell C60Extra Hard168350T5000000
    9"-0.0006" to -0.0002"1/4"-20
    		19/64"1/2"Rockwell C60Extra Hard168350T2100000
    13"-0.0006" to -0.0002"1/4"-20
    		19/64"1/2"Rockwell C60Extra Hard168350T2900000
    25"-0.0006" to -0.0002"1/4"-20
    		19/64"1/2"Rockwell C60Extra Hard168350T3800000
     
    1/2" Diameter
    7 1/4"-0.0007" to -0.0002"5/16"-18
    		3/8"5/8"Rockwell C60Extra Hard168350T600000
    9 1/4"-0.0007" to -0.0002"5/16"-18
    		3/8"5/8"Rockwell C60Extra Hard168350T2200000
    13 1/4"-0.0007" to -0.0002"5/16"-18
    		3/8"5/8"Rockwell C60Extra Hard168350T3100000
    25 1/4"-0.0007" to -0.0002"5/16"-18
    		3/8"5/8"Rockwell C60Extra Hard168350T3900000
     
    5/8" Diameter
    7 1/2"-0.0007" to -0.0002"3/8"-16
    		15/32"3/4"Rockwell C60Extra Hard168350T700000
    9 1/2"-0.0007" to -0.0002"3/8"-16
    		15/32"3/4"Rockwell C60Extra Hard168350T2300000
    13 1/2"-0.0007" to -0.0002"3/8"-16
    		15/32"3/4"Rockwell C60Extra Hard168350T3200000
    25 1/2"-0.0007" to -0.0002"3/8"-16
    		15/32"3/4"Rockwell C60Extra Hard168350T41000000
     
    3/4" Diameter
    8"-0.0008" to -0.0003"1/2"-13
    		5/8"1"Rockwell C60Extra Hard168350T800000
    10"-0.0008" to -0.0003"1/2"-13
    		5/8"1"Rockwell C60Extra Hard168350T2400000
    14"-0.0008" to -0.0003"1/2"-13
    		5/8"1"Rockwell C60Extra Hard168350T3300000
    26"-0.0008" to -0.0003"1/2"-13
    		5/8"1"Rockwell C60Extra Hard168350T42000000
     
    1" Diameter
    8 1/2"-0.0008" to -0.0003"5/8"-11
    		49/64"1 1/4"Rockwell C60Extra Hard168350T900000
    10 1/2"-0.0008" to -0.0003"5/8"-11
    		49/64"1 1/4"Rockwell C60Extra Hard168350T2500000
    14 1/2"-0.0008" to -0.0003"5/8"-11
    		49/64"1 1/4"Rockwell C60Extra Hard168350T3400000
    26 1/2"-0.0008" to -0.0003"5/8"-11
    		49/64"1 1/4"Rockwell C60Extra Hard168350T43000000
     

    Hollow Linear Shafts

    Image of Product. Front orientation. ZoomedIn view. Linear Shafts. Hollow Linear Shafts.
    Substantially lighter in weight than standard shafts, these are best for light loads. You can also run wiring, pneumatic tubing, coolants, and lubricants through the shaft's hollow center. Pair with linear bearings and shaft supports to create smooth, precise motion. These linear shafts are turned, ground, and polished to tight tolerances and hardened to resist wear.
    Steel—Stronger than aluminum and stainless steel. These shafts are best for dry environments since moisture will cause them to rust.
    Surface Smoothness—The lower the microinch value, the smoother the finish and the less friction it will cause on the bearing.
    Certificate
    Lg.
    Dia. Tolerance
    ID
    Hardness
    Hardness
    Rating
    Surface Smoothness,
    μin
    Type
    Form
    Each
    Steel
     
    3/4" Diameter
    12"-0.001" to -0.0005"0.438"Rockwell C58Extra Hard8——6007K35000000
    18"-0.001" to -0.0005"0.438"Rockwell C58Extra Hard8——6007K4500000
    24"-0.001" to -0.0005"0.438"Rockwell C58Extra Hard8——6007K55000000
    36"-0.001" to -0.0005"0.438"Rockwell C58Extra Hard8——6007K65000000
    48"-0.001" to -0.0005"0.438"Rockwell C58Extra Hard8——6007K75000000
    60"-0.001" to -0.0005"0.438"Rockwell C58Extra Hard8——6007K85000000
     
    1" Diameter
    12"-0.001" to -0.0005"0.599"Rockwell C58Extra Hard8——6007K3600000
    18"-0.001" to -0.0005"0.599"Rockwell C58Extra Hard8——6007K46000000
    24"-0.001" to -0.0005"0.599"Rockwell C58Extra Hard8——6007K56000000
    36"-0.001" to -0.0005"0.599"Rockwell C58Extra Hard8——6007K66000000
    48"-0.001" to -0.0005"0.599"Rockwell C58Extra Hard8——6007K76000000
    60"-0.001" to -0.0005"0.599"Rockwell C58Extra Hard8——6007K86000000
     
    1 1/4" Diameter
    12"-0.001" to 0"0.75"Brinell 225Medium32Material Certificate
    		Paper
    		8929T1100000
    24"-0.001" to 0"0.75"Brinell 225Medium32Material Certificate
    		Paper
    		8929T12000000
    36"-0.001" to 0"0.75"Brinell 225Medium32Material Certificate
    		Paper
    		8929T13000000
    48"-0.001" to 0"0.75"Brinell 225Medium32Material Certificate
    		Paper
    		8929T14000000
     
    1 1/2" Diameter
    12"-0.0011" to -0.0006"0.89"Rockwell C58Extra Hard8——6007K3700000
    12"-0.001" to 0"1"Brinell 225Medium32Material Certificate
    		Paper
    		8929T2100000
    18"-0.0011" to -0.0006"0.89"Rockwell C58Extra Hard8——6007K47000000
    24"-0.0011" to -0.0006"0.89"Rockwell C58Extra Hard8——6007K57000000
    24"-0.001" to 0"1"Brinell 225Medium32Material Certificate
    		Paper
    		8929T22000000
    36"-0.0011" to -0.0006"0.89"Rockwell C58Extra Hard8——6007K67000000
    36"-0.001" to 0"1"Brinell 225Medium32Material Certificate
    		Paper
    		8929T23000000
    48"-0.0011" to -0.0006"0.89"Rockwell C58Extra Hard8——6007K77000000
    48"-0.001" to 0"1"Brinell 225Medium32Material Certificate
    		Paper
    		8929T24000000
    60"-0.0011" to -0.0006"0.89"Rockwell C58Extra Hard8——6007K87000000
     
    2" Diameter
    12"-0.002" to 0"1.5"Brinell 225Medium32Material Certificate
    		Paper
    		8929T31000000
    12"-0.0013" to -0.0006"1.25"Rockwell C58Extra Hard8——6007K38000000
    18"-0.0013" to -0.0006"1.25"Rockwell C58Extra Hard8——6007K48000000
    24"-0.002" to 0"1.5"Brinell 225Medium32Material Certificate
    		Paper
    		8929T32000000
    24"-0.0013" to -0.0006"1.25"Rockwell C58Extra Hard8——6007K58000000
    36"-0.002" to 0"1.5"Brinell 225Medium32Material Certificate
    		Paper
    		8929T33000000
    36"-0.0013" to -0.0006"1.25"Rockwell C58Extra Hard8——6007K68000000
    48"-0.002" to 0"1.5"Brinell 225Medium32Material Certificate
    		Paper
    		8929T34000000
    48"-0.0013" to -0.0006"1.25"Rockwell C58Extra Hard8——6007K78000000
    60"-0.0013" to -0.0006"1.25"Rockwell C58Extra Hard8——6007K88000000
     
    6 mm Diameter
    50 mm-0.012 mm to -0.004 mm2 mmRockwell C59Extra Hard15——5964K11100000
    200 mm-0.012 mm to -0.004 mm2 mmRockwell C59Extra Hard15——5964K11400000
     
    8 mm Diameter
    100 mm-0.014 mm to -0.005 mm3 mmRockwell C59Extra Hard15——5964K11800000
     
    10 mm Diameter
    100 mm-0.014 mm to -0.005 mm4 mmRockwell C59Extra Hard15——5964K12700000
    200 mm-0.014 mm to -0.005 mm4 mmRockwell C59Extra Hard15——5964K12900000
    400 mm-0.014 mm to -0.005 mm4 mmRockwell C59Extra Hard15——5964K132000000
     
    12 mm Diameter
    300 mm-0.018 mm to 0 mm4 mmRockwell C59Extra Hard12——5964K1100000
    500 mm-0.018 mm to 0 mm4 mmRockwell C59Extra Hard12——5964K1200000
    1,000 mm-0.018 mm to 0 mm4 mmRockwell C59Extra Hard12——5964K13000000
     
    16 mm Diameter
    300 mm-0.018 mm to 0 mm7 mmRockwell C59Extra Hard12——5964K3100000
    500 mm-0.018 mm to 0 mm7 mmRockwell C59Extra Hard12——5964K3200000
    1,000 mm-0.018 mm to 0 mm7 mmRockwell C59Extra Hard12——5964K33000000
     
    20 mm Diameter
    300 mm-0.021 mm to 0 mm14 mmRockwell C59Extra Hard12——5964K2100000
    500 mm-0.021 mm to 0 mm14 mmRockwell C59Extra Hard12——5964K41000000
    1,000 mm-0.021 mm to 0 mm14 mmRockwell C59Extra Hard12——5964K51000000
    1,500 mm-0.021 mm to 0 mm14 mmRockwell C59Extra Hard12——5964K71000000
     
    25 mm Diameter
    300 mm-0.021 mm to 0 mm15.5 mmRockwell C59Extra Hard12——5964K2200000
    500 mm-0.021 mm to 0 mm15.5 mmRockwell C59Extra Hard12——5964K42000000
    1,000 mm-0.021 mm to 0 mm15.5 mmRockwell C59Extra Hard12——5964K52000000
    1,500 mm-0.021 mm to 0 mm15.5 mmRockwell C59Extra Hard12——5964K72000000
     
    30 mm Diameter
    300 mm-0.021 mm to 0 mm18.2 mmRockwell C59Extra Hard12——5964K2300000
    500 mm-0.021 mm to 0 mm18.2 mmRockwell C59Extra Hard12——5964K43000000
    1,000 mm-0.021 mm to 0 mm18.2 mmRockwell C59Extra Hard12——5964K53000000
    1,500 mm-0.021 mm to 0 mm18.2 mmRockwell C59Extra Hard12——5964K73000000
     
    40 mm Diameter
    500 mm-0.025 mm to 0 mm26 mmRockwell C59Extra Hard12——5964K44000000
    1,000 mm-0.025 mm to 0 mm26 mmRockwell C59Extra Hard12——5964K54000000
    1,500 mm-0.025 mm to 0 mm26 mmRockwell C59Extra Hard12——5964K74000000
     

    Build-Your-Own Support-Rail Shafts

    Choose a shaft and a matching support rail in the profile you need to create a custom setup for your machine’s layout. Tapped holes drilled along the length of these shafts match up with holes on support rails for quick alignment and setup. The support rails prevent bending and bearing misalignment under moderate to heavy loads. Pair these shafts with linear bearings to create smooth, precise motion. They are turned, ground, and polished to tight tolerances and hardened to resist wear.
    Cut the support rails and shafts to size or mount them end-to-end for long runs. Then, align the mounting holes on the shafts with those on the rails and fasten them with socket head screws (not included). After assembly, test for alignment to guarantee smooth motion.
    Shafts
    Image of Product. Front orientation. ZoomedIn view. Linear Shafts. Build-Your-Own Support-Rail Shafts, Shafts.
    Steel—Stronger than aluminum and stainless steel. These shafts are best for dry environments since moisture will cause them to rust.
    Highly Wear-Resistant 440C Stainless Steel—Balancing strength, wear resistance, and corrosion resistance, these shafts can handle moisture and mild cleaning solutions.
    Surface Smoothness—The lower the microinch value, the smoother the finish and the less friction it will cause on the bearing.
    Mounting Hole
    Lg.
    Dia. Tolerance
    End-to-Mounting
    Hole Lg.
    Ctr.-to-Ctr.
    Lg.
    Thread
    Size
    Dp.
    Mounting Fasteners
    Included
    Hardness
    Hardness
    Rating
    Surface Smoothness,
    μin
    Each
    Steel
     
    1/2" Diameter
    24"-0.001" to -0.0005"2"4"6-32
    		1/4"NoRockwell C60Extra Hard86499K530000000
    48"-0.001" to -0.0005"2"4"6-32
    		1/4"NoRockwell C60Extra Hard86499K73000000
    72"-0.001" to -0.0005"2"4"6-32
    		1/4"NoRockwell C60Extra Hard86499K33000000
    96"-0.001" to -0.0005"2"4"6-32
    		1/4"NoRockwell C60Extra Hard86499K43000000
     
    5/8" Diameter
    24"-0.001" to -0.0005"2"4"8-32
    		5/16"NoRockwell C60Extra Hard86499K59000000
    48"-0.001" to -0.0005"2"4"8-32
    		5/16"NoRockwell C60Extra Hard86499K79000000
    72"-0.001" to -0.0005"2"4"8-32
    		5/16"NoRockwell C60Extra Hard86499K39000000
    96"-0.001" to -0.0005"2"4"8-32
    		5/16"NoRockwell C60Extra Hard86499K49000000
     
    3/4" Diameter
    24"-0.001" to -0.0005"3"6"10-32
    		3/8"NoRockwell C60Extra Hard86499K54000000
    48"-0.001" to -0.0005"3"6"10-32
    		3/8"NoRockwell C60Extra Hard86499K74000000
    72"-0.001" to -0.0005"3"6"10-32
    		3/8"NoRockwell C60Extra Hard86499K34000000
    96"-0.001" to -0.0005"3"6"10-32
    		3/8"NoRockwell C60Extra Hard86499K44000000
     
    1" Diameter
    24"-0.001" to -0.0005"3"6"1/4"-20
    		1/2"NoRockwell C60Extra Hard86499K55000000
    48"-0.001" to -0.0005"3"6"1/4"-20
    		1/2"NoRockwell C60Extra Hard86499K75000000
    72"-0.001" to -0.0005"3"6"1/4"-20
    		1/2"NoRockwell C60Extra Hard86499K35000000
    96"-0.001" to -0.0005"3"6"1/4"-20
    		1/2"NoRockwell C60Extra Hard86499K45000000
     
    1 1/4" Diameter
    24"-0.001" to -0.0005"3"6"5/16"-18
    		5/8"NoRockwell C60Extra Hard86499K56000000
    48"-0.001" to -0.0005"3"6"5/16"-18
    		5/8"NoRockwell C60Extra Hard86499K76000000
    72"-0.001" to -0.0005"3"6"5/16"-18
    		5/8"NoRockwell C60Extra Hard86499K36000000
    96"-0.001" to -0.0005"3"6"5/16"-18
    		5/8"NoRockwell C60Extra Hard86499K46000000
     
    1 1/2" Diameter
    24"-0.0011" to -0.0006"4"8"3/8"-16
    		3/4"NoRockwell C60Extra Hard86499K57000000
    48"-0.0011" to -0.0006"4"8"3/8"-16
    		3/4"NoRockwell C60Extra Hard86499K77000000
    72"-0.0011" to -0.0006"4"8"3/8"-16
    		3/4"NoRockwell C60Extra Hard86499K37000000
    96"-0.0011" to -0.0006"4"8"3/8"-16
    		3/4"NoRockwell C60Extra Hard86499K47000000
     
    Highly Wear-Resistant 440C Stainless Steel
     
    1/2" Diameter
    24"-0.001" to -0.0005"2"4"6-32
    		1/4"NoRockwell C50Extra Hard86526K53000000
    48"-0.001" to -0.0005"2"4"6-32
    		1/4"NoRockwell C50Extra Hard86526K73000000
    72"-0.001" to -0.0005"2"4"6-32
    		1/4"NoRockwell C50Extra Hard86526K33000000
    96"-0.001" to -0.0005"2"4"6-32
    		1/4"NoRockwell C50Extra Hard86526K43000000
     
    5/8" Diameter
    24"-0.001" to -0.0005"2"4"8-32
    		5/16"NoRockwell C50Extra Hard86526K59000000
    48"-0.001" to -0.0005"2"4"8-32
    		5/16"NoRockwell C50Extra Hard86526K79000000
    72"-0.001" to -0.0005"2"4"8-32
    		5/16"NoRockwell C50Extra Hard86526K39000000
    96"-0.001" to -0.0005"2"4"8-32
    		5/16"NoRockwell C50Extra Hard86526K49000000
     
    3/4" Diameter
    24"-0.001" to -0.0005"3"6"10-32
    		3/8"NoRockwell C50Extra Hard86526K54000000
    48"-0.001" to -0.0005"3"6"10-32
    		3/8"NoRockwell C50Extra Hard86526K74000000
    72"-0.001" to -0.0005"3"6"10-32
    		3/8"NoRockwell C50Extra Hard86526K34000000
    96"-0.001" to -0.0005"3"6"10-32
    		3/8"NoRockwell C50Extra Hard86526K44000000
     
    1" Diameter
    24"-0.001" to -0.0005"3"6"1/4"-20
    		1/2"NoRockwell C50Extra Hard86526K55000000
    48"-0.001" to -0.0005"3"6"1/4"-20
    		1/2"NoRockwell C50Extra Hard86526K75000000
    72"-0.001" to -0.0005"3"6"1/4"-20
    		1/2"NoRockwell C50Extra Hard86526K35000000
    96"-0.001" to -0.0005"3"6"1/4"-20
    		1/2"NoRockwell C50Extra Hard86526K45000000
     
    1 1/4" Diameter
    24"-0.001" to -0.0005"3"6"5/16"-18
    		5/8"NoRockwell C50Extra Hard86526K56000000
    72"-0.001" to -0.0005"3"6"5/16"-18
    		5/8"NoRockwell C50Extra Hard86526K36000000
    96"-0.001" to -0.0005"3"6"5/16"-18
    		5/8"NoRockwell C50Extra Hard86526K4600000000
     
    1 1/2" Diameter
    48"-0.0011" to -0.0006"4"8"3/8"-16
    		3/4"NoRockwell C50Extra Hard86526K77000000
    72"-0.0011" to -0.0006"4"8"3/8"-16
    		3/4"NoRockwell C50Extra Hard86526K37000000
    96"-0.0011" to -0.0006"4"8"3/8"-16
    		3/4"NoRockwell C50Extra Hard86526K4700000000
     
    Support Rails
    Lg.
    Bottom-to-Shaft
    Ht.
    Overall
    Wd.
    End-to-Mounting
    Hole Lg.
    Mounting Hole
    Ctr.-to-Ctr. Lg.
    Shaft Mounting
    Hole Thread Size
    Mounting Fasteners
    Included
    Material
    Each
    Standard Profile
    Image of Product. Front orientation. Linear Shaft Supports. Standard Profile, 6061 Aluminum.
     
    For 1/2" Diameter Shafts
    24"0.875"1 1/2"2"4"6-32
    		No6061 Aluminum
    		6039K130000000
    48"0.875"1 1/2"2"4"6-32
    		No6061 Aluminum
    		6039K33000000
     
    For 5/8" Diameter Shafts
    24"0.813"1 5/8"2"4"1/4"-20
    		No6061 Aluminum
    		6039K19000000
    48"0.813"1 5/8"2"4"1/4"-20
    		No6061 Aluminum
    		6039K39000000
     
    For 3/4" Diameter Shafts
    24"1.125"1 3/4"3"6"10-32
    		No6061 Aluminum
    		6039K14000000
    48"1.125"1 3/4"3"6"10-32
    		No6061 Aluminum
    		6039K34000000
     
    For 1" Diameter Shafts
    24"1.25"2 1/8"3"6"1/4"-20
    		No6061 Aluminum
    		6039K15000000
    48"1.25"2 1/8"3"6"1/4"-20
    		No6061 Aluminum
    		6039K35000000
     
    For 1 1/4" Diameter Shafts
    24"1.5"2 1/2"3"6"5/16"-18
    		No6061 Aluminum
    		6039K16000000
    48"1.5"2 1/2"3"6"5/16"-18
    		No6061 Aluminum
    		6039K36000000
     
    For 1 1/2" Diameter Shafts
    24"1.75"3"4"8"3/8"-16
    		No6061 Aluminum
    		6039K17000000
    48"1.75"3"4"8"3/8"-16
    		No6061 Aluminum
    		6039K37000000
     
    Low Profile
    Image of Product. Front orientation. Linear Shaft Supports. Low Profile, 6063 Aluminum.
     
    For 1/2" Diameter Shafts
    24"0.297"3/8"2"4"6-32
    		No6063 Aluminum
    		8154T1000000
    48"0.297"3/8"2"4"6-32
    		No6063 Aluminum
    		8154T11000000
     
    For 5/8" Diameter Shafts
    24"0.359"29/64"2"4"8-32
    		No6063 Aluminum
    		8154T2000000
    48"0.359"29/64"2"4"8-32
    		No6063 Aluminum
    		8154T12000000
     
    For 3/4" Diameter Shafts
    24"0.359"33/64"3"6"10-32
    		No6063 Aluminum
    		8154T3000000
    48"0.359"33/64"3"6"10-32
    		No6063 Aluminum
    		8154T13000000
     
    For 1" Diameter Shafts
    24"0.453"45/64"3"6"1/4"-20
    		No6063 Aluminum
    		8154T4000000
    48"0.453"45/64"3"6"1/4"-20
    		No6063 Aluminum
    		8154T14000000
     
    For 1 1/4" Diameter Shafts
    24"0.516"25/32"3"6"5/16"-18
    		No6063 Aluminum
    		8154T5000000
    48"0.516"25/32"3"6"5/16"-18
    		No6063 Aluminum
    		8154T15000000
     
    For 1 1/2" Diameter Shafts
    24"0.578"15/16"4"8"3/8"-16
    		No6063 Aluminum
    		8154T6000000
    48"0.578"15/16"4"8"3/8"-16
    		No6063 Aluminum
    		8154T16000000
     

    Tight-Tolerance Linear Shafts

    Image of Product. Front orientation. Linear Shafts. Tight-Tolerance Linear Shafts.
    With a diameter tolerance that's at least two times tighter than our standard linear shafts, these distribute loads more uniformly, reduce vibration and wear, and improve accuracy and stability. These shafts are turned, ground, and polished to tight tolerances and hardened to resist wear. Use with linear bearings to create smooth, precise motion.
    Steel—Stronger than aluminum and stainless steel. These shafts are best for dry environments since moisture will cause them to rust.
    Surface Smoothness—The lower the microinch value, the smoother the finish and the less friction it will cause on the bearing.
    Lg.
    Dia.
    Tolerance
    Hardness
    Hardness
    Rating
    Surface Smoothness,
    μin
    Each
    Steel
     
    1/4" Diameter
    12"-0.0002" to 0"Rockwell C60Extra Hard83016N51000000
    24"-0.0002" to 0"Rockwell C60Extra Hard83016N5200000
    36"-0.0002" to 0"Rockwell C60Extra Hard83016N5300000
    48"-0.0002" to 0"Rockwell C60Extra Hard83016N5400000
    60"-0.0002" to 0"Rockwell C60Extra Hard83016N5500000
     
    3/8" Diameter
    12"-0.0002" to 0"Rockwell C60Extra Hard83016N3100000
    24"-0.0002" to 0"Rockwell C60Extra Hard83016N3200000
    36"-0.0002" to 0"Rockwell C60Extra Hard83016N3300000
    48"-0.0002" to 0"Rockwell C60Extra Hard83016N3400000
     
    5/8" Diameter
    12"-0.0002" to 0"Rockwell C60Extra Hard83016N3700000
    24"-0.0002" to 0"Rockwell C60Extra Hard83016N3800000
    36"-0.0002" to 0"Rockwell C60Extra Hard83016N3900000
    48"-0.0002" to 0"Rockwell C60Extra Hard83016N4100000
    60"-0.0002" to 0"Rockwell C60Extra Hard83016N42000000
    72"-0.0002" to 0"Rockwell C60Extra Hard83016N43000000
     
    7/8" Diameter
    12"-0.0002" to 0"Rockwell C60Extra Hard83016N5700000
    24"-0.0002" to 0"Rockwell C60Extra Hard83016N5800000
    36"-0.0002" to 0"Rockwell C60Extra Hard83016N5900000
     
    1 1/8" Diameter
    12"-0.0002" to 0"Rockwell C60Extra Hard83016N6400000
    24"-0.0002" to 0"Rockwell C60Extra Hard83016N6500000
     
    1 1/4" Diameter
    12"-0.0002" to 0"Rockwell C60Extra Hard83016N4400000
    24"-0.0002" to 0"Rockwell C60Extra Hard83016N4500000
    36"-0.0002" to 0"Rockwell C60Extra Hard83016N46000000
    48"-0.0002" to 0"Rockwell C60Extra Hard83016N47000000
     
    1 1/2" Diameter
    12"-0.0002" to 0"Rockwell C60Extra Hard83016N7100000
    24"-0.0002" to 0"Rockwell C60Extra Hard83016N72000000
    36"-0.0002" to 0"Rockwell C60Extra Hard83016N73000000
    48"-0.0002" to 0"Rockwell C60Extra Hard83016N74000000
    60"-0.0002" to 0"Rockwell C60Extra Hard83016N75000000
    72"-0.0002" to 0"Rockwell C60Extra Hard83016N76000000
     
    1 3/4" Diameter
    12"-0.0002" to 0"Rockwell C60Extra Hard83016N77000000
    24"-0.0002" to 0"Rockwell C60Extra Hard83016N78000000
    36"-0.0002" to 0"Rockwell C60Extra Hard83016N79000000
     
    2" Diameter
    12"-0.0002" to 0"Rockwell C60Extra Hard83016N84000000
    24"-0.0002" to 0"Rockwell C60Extra Hard83016N85000000
    36"-0.0002" to 0"Rockwell C60Extra Hard83016N86000000
    48"-0.0002" to 0"Rockwell C60Extra Hard83016N87000000
    60"-0.0002" to 0"Rockwell C60Extra Hard83016N88000000
    72"-0.0002" to 0"Rockwell C60Extra Hard83016N89000000
     

    Linear Shafts with Machinable Ends

    Image of Product. Front orientation. Linear Shafts. Linear Shafts with Machinable Ends.
    With 2" of softened metal on each end, machine these shafts for custom mounting. The rest of the shaft is turned, ground, and polished to tight tolerances to create smooth, precise motion with linear bearings. They are also hardened to resist wear.
    Steel—Stronger than aluminum and stainless steel. These shafts are best for dry environments since moisture will cause them to rust.
    Surface Smoothness—The lower the microinch value, the smoother the finish and the less friction it will cause on the bearing.
    Lg.
    Dia. Tolerance
    Hardness
    Hardness
    Rating
    Surface Smoothness,
    μin
    Each
    Steel
     
    1/4" Diameter
    10"-0.001" to -0.0005"Rockwell C60Extra Hard81144K11000000
    12"-0.001" to -0.0005"Rockwell C60Extra Hard81144K1200000
    16"-0.001" to -0.0005"Rockwell C60Extra Hard81144K1300000
    18"-0.001" to -0.0005"Rockwell C60Extra Hard81144K1400000
    24"-0.001" to -0.0005"Rockwell C60Extra Hard81144K1600000
    36"-0.001" to -0.0005"Rockwell C60Extra Hard81144K1800000
     
    3/8" Diameter
    10"-0.001" to -0.0005"Rockwell C60Extra Hard81144K1900000
    12"-0.001" to -0.0005"Rockwell C60Extra Hard81144K2100000
    16"-0.001" to -0.0005"Rockwell C60Extra Hard81144K2200000
    18"-0.001" to -0.0005"Rockwell C60Extra Hard81144K2300000
    24"-0.001" to -0.0005"Rockwell C60Extra Hard81144K2500000
    36"-0.001" to -0.0005"Rockwell C60Extra Hard81144K2700000
     
    1/2" Diameter
    10"-0.001" to -0.0005"Rockwell C60Extra Hard81144K2800000
    12"-0.001" to -0.0005"Rockwell C60Extra Hard81144K2900000
    16"-0.001" to -0.0005"Rockwell C60Extra Hard81144K3100000
    18"-0.001" to -0.0005"Rockwell C60Extra Hard81144K3200000
    24"-0.001" to -0.0005"Rockwell C60Extra Hard81144K3400000
    36"-0.001" to -0.0005"Rockwell C60Extra Hard81144K3600000
     
    3/4" Diameter
    10"-0.001" to -0.0005"Rockwell C60Extra Hard81144K3700000
    12"-0.001" to -0.0005"Rockwell C60Extra Hard81144K3800000
    16"-0.001" to -0.0005"Rockwell C60Extra Hard81144K3900000
    18"-0.001" to -0.0005"Rockwell C60Extra Hard81144K4100000
    24"-0.001" to -0.0005"Rockwell C60Extra Hard81144K4300000
    36"-0.001" to -0.0005"Rockwell C60Extra Hard81144K45000000
     
    1" Diameter
    10"-0.001" to -0.0005"Rockwell C60Extra Hard81144K4600000
    12"-0.001" to -0.0005"Rockwell C60Extra Hard81144K4700000
    16"-0.001" to -0.0005"Rockwell C60Extra Hard81144K4800000
    18"-0.001" to -0.0005"Rockwell C60Extra Hard81144K4900000
    24"-0.001" to -0.0005"Rockwell C60Extra Hard81144K5200000
    36"-0.001" to -0.0005"Rockwell C60Extra Hard81144K54000000
     
    1 1/2" Diameter
    10"-0.0011" to -0.0006"Rockwell C60Extra Hard81144K5500000
    12"-0.0011" to -0.0006"Rockwell C60Extra Hard81144K5600000
    16"-0.0011" to -0.0006"Rockwell C60Extra Hard81144K57000000
    18"-0.0011" to -0.0006"Rockwell C60Extra Hard81144K58000000
    24"-0.0011" to -0.0006"Rockwell C60Extra Hard81144K61000000
    36"-0.0011" to -0.0006"Rockwell C60Extra Hard81144K63000000
     
    back to top