7363N18 | Food-and-Beverage Ball Bearing

Filter by

System of Measurement

Shaft Diameter

Mounted Bearing Type

Four-Bolt Flange Mount

Panel Mount

Tapped Base Mount

Thread Mount

Three-Bolt Flange Mount

Two-Bolt Flange Mount

Shaft Mount Type

Bearing Seal Type

Housing Material

Overall Length

Mounting Hole Center-to-Center

Bearing Type

Center Height

Overall Width

Alignment Style

Bearing Material

For Load Direction

Combined Radial and Thrust

Radial

Dynamic Radial Load Capacity

Less than 1,000 lb.

1,000 lb. to 1,999 lb.

2,000 lb. to 9,999 lb.

10,000 lb. to 19,999 lb.

20,000 lb. or greater

Overall Height

Material

Lubrication

Grease Fitting Included

RoHS

REACH

Export Control Classification Number (ECCN)

1C998

1C999

EAR99

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Exempt

Static Radial Load Capacity

Less than 10,000 lb.

10,000 lb. to 19,999 lb.

20,000 lb. to 29,999 lb.

30,000 lb. to 99,999 lb.

100,000 lb. or greater

Forward

How can we improve?

1,164 Products

Mounted Ball Bearings

Smoother than smooth—the balls inside these bearings roll nearly friction-free. The sturdy housing bolts down to support shafts as they turn.

Lubricate regularly to keep your bearing in tip-top shape. Bearings with seals and shields keep lubricants in and contaminants out, and come packed with grease. Open bearings require initial lubrication and offer less protection against dust and debris.

Powder-Coated Cast Iron Housing—A rugged iron base coated in thick powder that protects against water, mild detergents, and oil. However, if the coating is scratched or chipped, the underlying iron may rust.

Nickel-Plated Cast Iron Housing—Combine the strength of iron with the corrosion resistance of stainless steel at an affordable price point. Nickel-plated iron is also unlikely to chip.

Polyester Plastic Housing—Lightweight and naturally rust-resistant, with a smooth surface that's easy to wipe clean.

Aluminum Housing—One-third the weight of cast iron but not as strong. Aluminum also resists corrosion.

Press Fit—For a tight connection to the shaft, install with a press or by heating and then cooling the bearing. Also known as an interference fit.

Set Screw—Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces.

Clamp On—Tighten the clamping screw to close the collar around your shaft for a secure, mar-free grip. The collar centers the shaft, decreasing vibration and allowing for higher speeds than set screws. Also known as concentric lock bearings.

Eccentric Lock—An off-center opening wedges against the shaft to grip it as it turns. Eccentric locks won't mar the shaft like a set screw, but the shaft will only rotate in one direction, so they aren't suitable for applications where the load will be reversed.

Locknut—Tighten the nut for a strong hold that stands up to heavy vibrations without letting go. An adapter sleeve is required and sold separately.

Sealmaster—Famous for exceptional sealing, Sealmaster bearings include a signature three-part seal in the inner ring. This design blocks out gritty debris and purges old grease to extend the life of the bearing.

SKF—Manufactured in Europe with a strong focus on precision. The more precise the bearing, the more efficiently it will run.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

	Bearings												Required Adapter Sleeves		Replacement Bearings
			Overall
	For Shaft Dia.	Ctr. Ht.	Lg.	Wd.	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Bearing Material	Bearing Seal Type	Misalignment Capability	Manufacturer		Each		Each		Each
Powder-Coated Cast Iron Housing







				Set Screw

				1/2"	1 3/16"	5"	1 1/2"	2,600	7,300	Steel	Sealed	2°	Sealmaster	7728T51	0000000	———	0	———	0


				5/8"	1 3/16"	5"	1 1/2"	2,600	7,300	Steel	Sealed	2°	Sealmaster	7728T52	000000	———	0	7728T112	000000
				3/4"	1 5/16"	5"	1 1/2"	2,600	7,300	Steel	Sealed	2°	Sealmaster	7728T53	000000	———	0	7728T113	00000
				7/8"	1 7/16"	5 1/2"	1 1/2"	2,800	6,300	Steel	Sealed	2°	Sealmaster	7728T54	000000	———	0	7728T114	000000
				15/16"	1 7/16"	5 1/2"	1 1/2"	2,800	6,300	Steel	Sealed	2°	Sealmaster	7728T55	000000	———	0	———	0
				1"	1 7/16"	5 1/2"	1 27/64"	2,800	5,500	Steel	Sealed	2°	McMaster-Carr Approved	6244K56	00000	———	0	———	0
				1"	1 7/16"	5 1/2"	1 1/2"	2,800	6,300	Steel	Sealed	2°	Sealmaster	7728T56	000000	———	0	7728T116	000000
				1 1/8"	1 11/16"	6 1/2"	1 7/8"	4,350	5,400	Steel	Sealed	2°	Sealmaster	7728T57	000000	———	0	7728T117	000000
				1 3/16"	1 11/16"	6 1/2"	1 7/8"	4,350	5,400	Steel	Sealed	2°	Sealmaster	7728T58	000000	———	0	7728T118	000000
				1 1/4"	1 11/16"	6 1/2"	1 7/8"	4,350	5,400	Steel	Sealed	2°	Sealmaster	7728T73	000000	———	0	7728T121	000000
				1 1/4"	1 7/8"	6 9/16"	1 7/8"	5,750	5,400	Steel	Sealed	2°	Sealmaster	7728T71	000000	———	0	7728T119	000000


				1 3/8"	1 7/8"	6 9/16"	1 7/8"	5,750	4,600	Steel	Sealed	2°	Sealmaster	7728T72	000000	———	0	7728T122	000000
				1 7/16"	1 7/8"	6 9/16"	1 15/16"	5,750	4,600	Steel	Sealed	2°	Sealmaster	7728T61	000000	———	0	7728T123	000000
				1 1/2"	1 15/16"	7 1/4"	2 1/8"	7,300	4,100	Steel	Sealed	2°	Sealmaster	7728T62	000000	———	0	7728T124	000000
				1 1/2"	2"	7 1/16"	1 59/64"	7,330	3,500	Steel	Sealed	2°	McMaster-Carr Approved	6244K62	000000	———	0	———	0
				1 11/16"	2 1/8"	7 1/2"	2 1/8"	7,900	3,800	Steel	Sealed	2°	Sealmaster	7728T63	000000	———	0	7728T125	000000
				1 3/4"	2 1/8"	7 1/2"	2 1/4"	7,900	3,800	Steel	Sealed	2°	Sealmaster	7728T74	000000	———	0	7728T151	000000
				1 7/8"	2 1/4"	8 1/8"	2 15/32"	7,850	3,500	Steel	Sealed	2°	Sealmaster	7728T75	000000	———	0	———	0
				1 15/16"	2 1/4"	8 1/8"	2 3/8"	7,850	3,500	Steel	Sealed	2°	Sealmaster	7728T64	000000	———	0	7728T126	000000
				2"	2 1/2"	8 5/8"	2 3/8"	9,750	3,200	Steel	Sealed	2°	Sealmaster	7728T65	000000	———	0	7728T128	000000
				2 3/16"	2 1/2"	8 5/8"	2 3/8"	9,750	3,200	Steel	Sealed	2°	Sealmaster	7728T66	000000	———	0	7728T129	000000


				2 1/4"	2 3/4"	9 1/2"	2 15/16"	11,700	3,000	Steel	Sealed	2°	Sealmaster	7728T76	000000	———	0	———	0
				2 7/16"	2 3/4"	9 1/2"	2 3/4"	11,700	3,000	Steel	Sealed	2°	Sealmaster	7728T67	000000	———	0	7728T131	000000
				20 mm	33.3 mm	127 mm	38 mm	2,600	7,300	Steel	Sealed	2°	Sealmaster	7835T51	000000	———	0	7835T111	000000
				25 mm	36.5 mm	140 mm	39.7 mm	2,800	6,300	Steel	Sealed	2°	Sealmaster	7835T52	000000	———	0	7835T112	000000
				30 mm	42.9 mm	165 mm	48 mm	4,350	5,400	Steel	Sealed	2°	Sealmaster	7835T53	000000	———	0	7835T113	000000
				35 mm	47.6 mm	167 mm	49.2 mm	5,750	4,600	Steel	Sealed	2°	Sealmaster	7835T54	000000	———	0	7835T114	000000
				40 mm	49.2 mm	184 mm	57.2 mm	7,300	4,100	Steel	Sealed	2°	Sealmaster	7835T55	000000	———	0	7835T115	000000
				45 mm	54 mm	191 mm	57.2 mm	7,900	3,800	Steel	Sealed	2°	Sealmaster	7835T56	000000	———	0	———	0
				50 mm	57.2 mm	206 mm	62.3 mm	7,850	3,500	Steel	Sealed	2°	Sealmaster	7835T57	000000	———	0	7835T117	000000
				60 mm	69.9 mm	241.3 mm	74.7 mm	11,700	3,000	Steel	Sealed	2°	Sealmaster	7835T59	000000	———	0	———	0


				75 mm	88.9 mm	330.2 mm	89 mm	14,800	2,400	Steel	Sealed	2°	Sealmaster	7835T6	000000	———	0	———	0




						Clamp On

						3/4"	1 5/16"	5"	1 1/2"	2,600	10,200	Steel	Sealed	2°	Sealmaster	2722T31	000000	———	0	———	0


						7/8"	1 7/16"	5 1/2"	1 1/2"	2,800	9,000	Steel	Sealed	2°	Sealmaster	2722T32	000000	———	0	———	0
						1"	1 7/16"	5 1/2"	1 1/2"	2,800	9,000	Steel	Sealed	2°	Sealmaster	2722T34	000000	———	0	———	0
						1 1/8"	1 11/16"	6 1/2"	1 7/8"	4,350	7,600	Steel	Sealed	2°	Sealmaster	2722T35	000000	———	0	———	0
						1 3/16"	1 11/16"	6 1/2"	1 7/8"	4,350	7,600	Steel	Sealed	2°	Sealmaster	2773T23	000000	———	0	———	0
						1 1/4"	1 11/16"	6 1/2"	1 7/8"	4,350	7,600	Steel	Sealed	2°	Sealmaster	2722T36	000000	———	0	———	0
						1 3/8"	1 7/8"	6 9/16"	1 7/8"	5,750	6,500	Steel	Sealed	2°	Sealmaster	2722T37	000000	———	0	———	0
1 7/16"						1 7/8"	6 9/16"	1 55/64"	5,700	5,300	Steel	Shielded	2°	SKF	2722T24	000000	———	0	———	0
1 7/16"	1 7/8"					6 9/16"	1 7/8"	5,750	6,500	Steel	Sealed	2°	Sealmaster	2722T38	000000	———	0	———	0
1 1/2"	1 15/16"					7 1/4"	2 1/8"	7,300	5,850	Steel	Sealed	2°	Sealmaster	2722T39	000000	———	0	———	0
1 3/4"	2 1/8"					7 1/2"	2 1/8"	7,900	5,300	Steel	Sealed	2°	Sealmaster	2722T41	000000	———	0	———	0


1 15/16"	2 1/4"	8 1/8"	2 3/16"			7,900	4,000	Steel	Shielded	2°	SKF	2722T27	000000	———	0	———	0
2"	2 1/2"	8 5/8"	2 3/8"			9,750	5,000	Steel	Sealed	2°	Sealmaster	2722T42	000000	———	0	———	0
2 7/16"	2 3/4"	9 1/2"	2 3/4"			11,700	4,100	Steel	Sealed	2°	Sealmaster	2722T43	000000	———	0	———	0




		Eccentric Lock

		1/2"	1 1/16"			5 7/16"	1 1/2"	2,100	9,500	Steel	Sealed	2°	SKF	6361K52	00000	———	0	———	0


		5/8"	1 1/16"			5 15/32"	1 1/2"	2,150	9,500	Steel	Sealed	2°	SKF	6361K33	00000	———	0	6361K212	00000
		3/4"	1 1/4"			5"	1 19/32"	2,850	8,500	Steel	Sealed	2°	SKF	6361K34	00000	———	0	6361K213	00000
		7/8"	1 5/16"			5 1/2"	1 43/64"	3,150	7,000	Steel	Sealed	2°	SKF	6361K35	00000	———	0	6361K214	00000
		1"	1 5/16"			5 1/2"	1 43/64"	3,150	7,000	Steel	Sealed	2°	SKF	6361K37	00000	———	0	6361K216	00000
		1 1/8"	1 9/16"			6 1/2"	1 59/64"	4,350	6,300	Steel	Sealed	2°	SKF	6361K38	000000	———	0	———	0
		1 3/16"	1 9/16"			6 1/2"	2 1/16"	4,350	6,300	Steel	Sealed	2°	SKF	6361K39	000000	———	0	———	0
		1 1/4"	1 13/16"			6 9/16"	2 1/16"	5,700	5,300	Steel	Sealed	2°	SKF	6361K41	000000	———	0	6361K221	00000
		1 3/8"	1 13/16"			6 9/16"	2 1/16"	5,700	5,300	Steel	Sealed	2°	SKF	6361K42	000000	———	0	6361K222	00000
		1 7/16"	1 13/16"			6 9/16"	2 1/16"	5,700	5,300	Steel	Sealed	2°	SKF	6361K43	00000	———	0	6361K223	00000
		1 1/2"	1 15/16"			7 1/4"	2 1/4"	6,900	4,800	Steel	Sealed	2°	SKF	6361K44	000000	———	0	6361K224	00000


		1 3/4"	2 1/16"			7 15/32"	2 19/64"	7,450	4,300	Steel	Sealed	2°	SKF	6361K46	000000	———	0	———	0
		1 15/16"	2 3/16"			8 1/8"	2 3/8"	7,850	4,000	Steel	Sealed	2°	SKF	6361K47	000000	———	0	6361K227	000000
		2"	2 7/16"			8 5/8"	2 37/64"	9,800	3,600	Steel	Sealed	2°	SKF	6361K51	000000	———	0	6361K231	000000
		2 3/16"	2 7/16"			8 5/8"	2 9/16"	9,800	3,600	Steel	Sealed	2°	SKF	6361K53	000000	———	0	———	0
		20 mm	33.3 mm			127 mm	39.5 mm	2,850	8,500	Steel	Sealed	2°	SKF	7835T125	000000	———	0	———	0
		20 mm	33.3 mm			127 mm	42.6 mm	2,850	8,500	Steel	Sealed	2°	SKF	7835T126	000000	———	0	———	0
		25 mm	36.5 mm			130 mm	41.5 mm	3,100	7,000	Steel	Sealed	2°	SKF	7835T127	000000	———	0	———	0
		25 mm	36.5 mm			130 mm	44.9 mm	3,100	7,000	Steel	Sealed	2°	SKF	7835T128	000000	———	0	———	0
		30 mm	42.9 mm			152 mm	46.7 mm	4,350	6,300	Steel	Sealed	2°	SKF	7835T129	000000	———	0	———	0
		30 mm	42.9 mm			152 mm	50.1 mm	4,350	6,300	Steel	Sealed	2°	SKF	7835T131	000000	———	0	———	0


		40 mm	49.2 mm			175 mm	58.9 mm	6,900	4,800	Steel	Sealed	2°	SKF	7835T135	000000	———	0	———	0
		45 mm	54 mm			187 mm	56.7 mm	7,450	4,300	Steel	Sealed	2°	SKF	7835T136	000000	———	0	———	0
		50 mm	57.2 mm			203 mm	65.1 mm	7,850	4,000	Steel	Sealed	2°	SKF	7835T139	000000	———	0	———	0




						Locknut

						25 mm	42.9 mm	165 mm	43 mm	4,350	6,300	Steel	Sealed	2°	SKF	7835T146	00000	7835T147	000000	———	0


				30 mm	47.6 mm	167 mm	47.3 mm	5,700	5,300	Steel	Sealed	2°	SKF	7835T148	000000	7835T149	00000	———	0
				35 mm	49.2 mm	184 mm	51.5 mm	6,900	4,800	Steel	Sealed	2°	SKF	7835T151	000000	7835T152	00000	———	0
				40 mm	54 mm	190 mm	54.5 mm	7,450	4,300	Steel	Sealed	2°	SKF	7835T153	000000	7835T154	00000	———	0
				55 mm	69.8 mm	241 mm	66.8 mm	11,800	3,400	Steel	Sealed	2°	SKF	7835T159	000000	7835T161	000000	———	0
				60 mm	76.2 mm	265 mm	70.8 mm	12,850	3,000	Steel	Sealed	2°	SKF	7835T162	000000	7835T164	00000	———	0


				Nickel-Plated Cast Iron Housing







								Set Screw

								1/2"	1 3/16"	5"	1 7/16"	2,850	5,500	Steel	Sealed	2°	McMaster-Carr Approved	6494K67	00000	———	0	———	0


								5/8"	1 3/16"	5"	1 1/2"	2,870	5,800	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K11	00000	———	0	———	0
3/4"								1 5/16"	5"	1 1/2"	2,870	5,800	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K13	00000	———	0	———	0
7/8"	1 7/16"							5 1/2"	1 33/64"	3,100	5,500	Steel	Sealed	2°	McMaster-Carr Approved	6494K68	00000	———	0	———	0
15/16"	1 7/16"							5 1/2"	1 33/64"	3,100	5,000	Steel	Sealed	2°	McMaster-Carr Approved	6494K69	00000	———	0	———	0
1"	1 7/16"							5 1/2"	1 17/32"	3,140	5,100	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K14	00000	———	0	———	0
1 1/8"	1 11/16"							6 1/2"	1 51/64"	4,350	4,000	Steel	Sealed	2°	McMaster-Carr Approved	6494K71	00000	———	0	———	0
1 3/16"	1 11/16"							6 1/2"	1 51/64"	4,350	4,000	Steel	Sealed	2°	McMaster-Carr Approved	6494K72	00000	———	0	———	0
1 1/4"	1 7/8"							6 9/16"	1 61/64"	5,770	3,700	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K16	00000	———	0	———	0
1 5/16"	1 7/8"							6 9/16"	1 15/16"	5,750	3,500	Steel	Sealed	2°	McMaster-Carr Approved	6494K73	00000	———	0	———	0
1 3/8"	1 7/8"							6 9/16"	1 15/16"	5,750	3,500	Steel	Sealed	2°	McMaster-Carr Approved	6494K74	00000	———	0	———	0


1 7/16"	1 7/8"							6 9/16"	1 15/16"	5,750	3,500	Steel	Sealed	2°	McMaster-Carr Approved	6494K75	00000	———	0	———	0
1 1/2"	1 15/16"							7 1/4"	2 1/4"	6,540	3,300	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K19	00000	———	0	———	0
1 5/8"	2 1/8"							7 15/32"	2 1/4"	7,650	3,000	Steel	Sealed	2°	McMaster-Carr Approved	6494K76	00000	———	0	———	0
1 11/16"	2 1/8"							7 15/32"	2 1/4"	7,650	3,000	Steel	Sealed	2°	McMaster-Carr Approved	6494K77	00000	———	0	———	0
1 3/4"	2 1/8"							7 15/32"	2 1/4"	7,650	3,000	Steel	Sealed	2°	McMaster-Carr Approved	6494K78	00000	———	0	———	0
1 7/8"	2 1/4"							8 1/8"	2 15/32"	7,850	2,500	Steel	Sealed	2°	McMaster-Carr Approved	6494K79	00000	———	0	———	0
1 15/16"	2 1/4"							8 1/8"	2 15/32"	7,850	2,500	Steel	Sealed	2°	McMaster-Carr Approved	6494K81	00000	———	0	———	0
2"	2 1/2"							8 5/8"	2 1/2"	9,750	2,500	Steel	Sealed	2°	McMaster-Carr Approved	6494K82	000000	———	0	———	0
2 3/16"	2 1/2"							8 5/8"	2 1/2"	9,750	2,500	Steel	Sealed	2°	McMaster-Carr Approved	6494K83	000000	———	0	———	0
2 1/4"	2 3/4"							9 1/2"	2 15/16"	11,750	2,000	Steel	Sealed	2°	McMaster-Carr Approved	6494K84	000000	———	0	———	0


2 7/16"	2 3/4"							9 1/2"	2 15/16"	11,750	2,000	Steel	Sealed	2°	McMaster-Carr Approved	6494K85	000000	———	0	———	0
2 1/2"	3"							10 7/16"	2 15/16"	12,850	2,000	Steel	Sealed	2°	McMaster-Carr Approved	6494K86	000000	———	0	———	0
2 3/4"	3 1/8"							10 15/32"	3 5/32"	13,950	2,000	Steel	Sealed	2°	McMaster-Carr Approved	6494K87	000000	———	0	———	0
3"	3 1/4"							10 13/16"	3 13/64"	15,150	2,000	Steel	Sealed	2°	McMaster-Carr Approved	6494K88	000000	———	0	———	0


Polyester Plastic Housing







		Set Screw

		1/2"	1 21/64"							5"	1 1/2"	230	800	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K51	000000	———	0	———	0


		5/8"	1 21/64"							5"	1 1/2"	230	800	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K52	000000	———	0	———	0
		3/4"	1 21/64"							5"	1 1/2"	230	800	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K53	000000	———	0	———	0
		1"	1 13/32"							5 17/32"	1 1/2"	270	700	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K54	000000	———	0	———	0
		1 1/4"	1 11/16"							6 13/32"	1 13/16"	375	650	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K61	000000	———	0	———	0


		Aluminum Housing







										Press Fit

										3/32"	3/8"	1 29/64"	13/64"	95	60,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N101	00000	———	0	———	0


						1/8"	3/8"			1 7/16"	13/64"	120	63,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N1	00000	———	0	———	0
						1/8"	3/8"			1 29/64"	13/64"	115	26,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N11	00000	———	0	———	0
						5/32"	3/8"			1 29/64"	13/64"	65	26,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N12	00000	———	0	———	0
						5/32"	3/8"			1 29/64"	13/64"	65	53,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N102	00000	———	0	———	0
						3/16"	3/8"			1 7/16"	13/64"	240	60,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N2	00000	———	0	———	0
						3/16"	3/8"			1 29/64"	13/64"	230	21,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N13	00000	———	0	———	0
						1/4"	3/8"			1 7/16"	13/64"	200	48,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N3	00000	———	0	———	0
						1/4"	3/8"			1 29/64"	13/64"	195	20,000	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N14	00000	———	0	———	0
						5/16"	3/8"			1 7/16"	13/64"	100	45,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N4	00000	———	0	———	0
						5/16"	3/8"			1 29/64"	13/64"	95	20,000	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N15	00000	———	0	———	0


						3/8"	9/16"			2 1/4"	25/64"	630	31,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N5	00000	———	0	———	0
						3/8"	9/16"			2 9/32"	25/64"	590	16,000	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N16	00000	———	0	———	0
						7/16"	1"			4 1/32"	41/64"	480	2,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N17	00000	———	0	———	0
						7/16"	1"			4 1/32"	41/64"	480	5,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N103	00000	———	0	———	0
						1/2"	3/4"			3 9/32"	41/64"	910	13,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N18	00000	———	0	———	0
						1/2"	3/4"			3 9/32"	41/64"	910	27,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N104	00000	———	0	———	0
						9/16"	1"			4 1/32"	41/64"	480	2,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N19	00000	———	0	———	0
						9/16"	1"			4 1/32"	41/64"	480	5,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N105	00000	———	0	———	0
						5/8"	1"			4 1/32"	41/64"	1,050	10,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N21	00000	———	0	———	0
						5/8"	1"			4 1/32"	41/64"	1,050	21,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N106	00000	———	0	———	0


						3/4"	1"			4 1/32"	41/64"	1,650	17,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N107	00000	———	0	———	0
						3/4"	1"			4 1/32"	41/64"	1,680	8,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N22	00000	———	0	———	0
						7/8"	1 1/4"			5 1/32"	55/64"	2,150	7,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N23	00000	———	0	———	0
						7/8"	1 1/4"			5 1/32"	55/64"	2,150	15,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N108	00000	———	0	———	0
						1"	1 1/4"			5 1/32"	55/64"	2,100	13,600	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N109	00000	———	0	———	0
						1"	1 1/4"			5 1/32"	55/64"	2,120	6,800	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N24	00000	———	0	———	0
						1 1/8"	1 1/4"			5 1/32"	55/64"	2,100	6,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N25	00000	———	0	———	0
						1 1/8"	1 1/4"			5 1/32"	55/64"	2,100	13,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N111	00000	———	0	———	0
						1 1/4"	1 1/4"			5 1/32"	55/64"	2,300	6,000	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N26	00000	———	0	———	0
1 1/4"						1 1/4"	5 1/32"			55/64"	2,300	12,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N112	00000	———	0	———	0


3 mm	3/8"					1 29/64"	13/64"			110	25,000	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N27	00000	———	0	———	0
3 mm	3/8"					1 29/64"	13/64"			110	50,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N113	00000	———	0	———	0
4 mm	3/8"					1 7/16"	13/64"			182	57,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N9	00000	———	0	———	0
4 mm	3/8"					1 29/64"	13/64"			170	24,000	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N28	00000	———	0	———	0
5 mm	3/8"					1 7/16"	13/64"	205		50,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N11	00000	———	0	———	0
5 mm	3/8"					1 29/64"	13/64"	190	21,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N29	00000	———	0	———	0
6 mm	3/8"					1 7/16"	13/64"	135	50,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N12	00000	———	0	———	0
6 mm	3/8"					1 29/64"	13/64"	125	21,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N31	00000	———	0	———	0
7 mm	3/8"					1 29/64"	13/64"	95	20,000	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N32	00000	———	0	———	0
7 mm	3/8"					1 29/64"	13/64"	95	40,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N114	00000	———	0	———	0


8 mm	3/8"					1 7/16"	13/64"	103	46,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N13	00000	———	0	———	0
8 mm	3/8"					1 29/64"	13/64"	95	20,000	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N33	00000	———	0	———	0
9 mm	9/16"					2 9/32"	25/64"	440	17,000	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N34	00000	———	0	———	0
9 mm	9/16"					2 9/32"	25/64"	440	34,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N115	00000	———	0	———	0
10 mm	9/16"	2 1/4"				25/64"	326	34,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N14	00000	———	0	———	0
10 mm	9/16"	2 9/32"	25/64"			300	18,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N35	00000	———	0	———	0
12 mm	3/4"	3 9/32"	41/64"			1,200	11,000	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N36	00000	———	0	———	0
12 mm	3/4"	3 9/32"	41/64"			1,200	22,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N116	00000	———	0	———	0
15 mm	3/4"	3 9/32"	41/64"			1,350	10,000	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N37	00000	———	0	———	0
15 mm	3/4"	3 9/32"	41/64"	1,350		20,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N117	00000	———	0	———	0
17 mm	1"	4 1/32"	41/64"	1,700	8,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N38	00000	———	0	———	0
17 mm	1"	4 1/32"	41/64"	1,700	17,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N118	00000	———	0	———	0
20 mm	1 1/4"	5 1/32"	55/64"	1,650	9,000	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N39	00000	———	0	———	0
20 mm	1 1/4"	5 1/32"	55/64"	1,650	18,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N119	00000	———	0	———	0
25 mm	1 1/4"	5 1/32"	55/64"	1,800	7,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N41	00000	———	0	———	0
25 mm	1 1/4"	5 1/32"	55/64"	1,800	15,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N121	00000	———	0	———	0
30 mm	1 1/4"	5 1/32"	55/64"	2,350	6,500	440C Stainless Steel	Sealed	—	McMaster-Carr Approved	4491N42	00000	———	0	———	0
30 mm	1 1/4"	5 1/32"	55/64"	2,350	13,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	8600N122	00000	———	0	———	0

Mounted Ball Bearings with Four-Bolt Flange

Smoother than smooth—the balls inside these bearings roll nearly friction-free. The four-bolt flange supports shafts with a stronger connection to the mounting surface than two-bolt alternatives.

Lubricate regularly to keep your bearing in tip-top shape. Bearings with seals keep lubricants in and contaminants out, and come packed with grease. Open bearings require initial lubrication and offer less protection against dust and debris.

Nickel-Plated Cast Iron Housing—Combine the strength of iron with the corrosion resistance of stainless steel at an affordable price point. Nickel-plated iron is also unlikely to chip.

Polyester Plastic Housing—Lightweight and naturally rust-resistant, with a smooth surface that's easy to wipe clean.

Set Screw—Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces.

Locknut—Tighten the nut for a strong hold that stands up to heavy vibrations without letting go. An adapter sleeve is required and sold separately.

SKF—Manufactured in Europe with a strong focus on precision. The more precise the bearing, the more efficiently it will run.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

	Bearings												Required Adapter Sleeves		Replacement Bearings
		Overall
	For Shaft Dia.	Lg.	Wd.	Flange Thk.	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Bearing Material	Bearing Seal Type	Misalignment Capability	Manufacturer		Each		Each		Each
Powder-Coated Cast Iron Housing







				Set Screw

				1/2"	3"	1 9/32"	7/16"	2,150	9,500	Steel	Sealed	2°	SKF	5967K31	000000	———	0	———	0


				5/8"	3"	1 9/32"	7/16"	2,150	9,500	Steel	Sealed	2°	SKF	5967K81	00000	———	0	———	0
				3/4"	3 3/8"	1 15/32"	3/8"	2,850	8,500	Steel	Sealed	2°	SKF	5967K82	00000	———	0	5967K13	000000
				7/8"	3 3/4"	1 39/64"	7/16"	3,100	7,000	Steel	Sealed	2°	SKF	5967K111	00000	———	0	———	0
				15/16"	3 3/4"	1 5/8"	7/16"	3,100	7,000	Steel	Sealed	2°	SKF	5967K241	00000	———	0	———	0
				1"	3 3/4"	1 19/32"	7/16"	3,150	7,000	Steel	Sealed	2°	SKF	5967K84	00000	———	0	5967K15	00000
				1 1/8"	4 1/4"	1 45/64"	5/8"	4,350	6,300	Steel	Sealed	2°	SKF	5967K112	000000	———	0	5967K72	00000
				1 3/16"	4 1/4"	1 41/64"	5/8"	4,350	6,300	Steel	Sealed	2°	SKF	5967K85	00000	———	0	5967K16	00000
				1 1/4"	4 1/4"	1 41/64"	5/8"	4,350	6,300	Steel	Sealed	2°	SKF	5967K41	00000	———	0	5967K17	00000
				1 1/4"	4 5/8"	1 53/64"	1/2"	5,700	5,300	Steel	Sealed	2°	SKF	5967K86	00000	———	0	5967K18	00000
				1 3/8"	4 5/8"	1 29/32"	1/2"	5,700	5,300	Steel	Sealed	2°	SKF	5967K113	000000	———	0	5967K73	00000


				1 7/16"	4 5/8"	1 53/64"	1/2"	5,700	5,300	Steel	Sealed	2°	SKF	5967K87	00000	———	0	5967K19	00000
				1 1/2"	5 1/8"	2 3/16"	21/32"	6,900	4,800	Steel	Sealed	2°	SKF	5967K88	000000	———	0	5967K21	000000
				1 11/16"	5 3/8"	2 7/32"	3/4"	7,450	4,300	Steel	Sealed	2°	SKF	5967K242	000000	———	0	———	0
				1 3/4"	5 3/8"	2 1/64"	23/32"	7,450	4,300	Steel	Sealed	2°	SKF	5967K89	000000	———	0	5967K22	000000
				1 15/16"	5 5/8"	2 27/64"	5/8"	7,850	4,000	Steel	Sealed	2°	SKF	5967K92	000000	———	0	5967K23	000000
				2"	6 3/8"	2 35/64"	11/16"	9,800	3,600	Steel	Sealed	2°	SKF	5967K93	000000	———	0	5967K24	000000
				2 3/16"	6 3/8"	2 19/32"	23/32"	9,800	3,600	Steel	Sealed	2°	SKF	5967K243	000000	———	0	———	0
				2 1/4"	6 7/8"	2 29/32"	11/16"	11,800	3,400	Steel	Sealed	2°	SKF	5967K114	000000	———	0	5967K74	000000
				2 7/16"	6 7/8"	2 29/32"	23/32"	11,800	3,400	Steel	Sealed	2°	SKF	5967K244	000000	———	0	———	0
				2 1/2"	7 3/8"	3 3/16"	7/8"	12,800	3,000	Steel	Sealed	2°	SKF	5967K115	000000	———	0	5967K75	000000


				20 mm	85.7 mm	32.5 mm	11.1 mm	2,600	7,300	Steel	Sealed	2°	Sealmaster	1485N1	000000	———	0	7835T111	000000
				25 mm	95.3 mm	36.5 mm	13.5 mm	2,800	6,300	Steel	Sealed	2°	Sealmaster	1485N2	000000	———	0	7835T112	000000
				30 mm	108 mm	39.7 mm	13.5 mm	4,350	5,400	Steel	Sealed	2°	Sealmaster	1485N3	000000	———	0	7835T113	000000
				35 mm	117.5 mm	44.5 mm	14.3 mm	5,750	4,600	Steel	Sealed	2°	Sealmaster	1485N4	000000	———	0	7835T114	000000
				40 mm	130.2 mm	51.2 mm	14.3 mm	7,300	4,100	Steel	Sealed	2°	Sealmaster	1485N5	000000	———	0	7835T115	000000
				45 mm	136.5 mm	52 mm	14.3 mm	7,900	3,800	Steel	Sealed	2°	Sealmaster	1485N6	000000	———	0	———	0
				50 mm	142.9 mm	54.8 mm	14.3 mm	7,850	3,500	Steel	Sealed	2°	Sealmaster	1485N7	000000	———	0	7835T117	000000
				55 mm	161.9 mm	58.7 mm	20.6 mm	9,750	3,200	Steel	Sealed	2°	Sealmaster	1485N8	000000	———	0	———	0
				60 mm	174.6 mm	68.3 mm	20.6 mm	11,700	3,000	Steel	Sealed	2°	Sealmaster	1485N9	000000	———	0	———	0




						Clamp On

						1"	3 3/4"	1 1/2"	17/32"	2,800	9,000	Steel	Sealed	2°	Sealmaster	3710T51	000000	———	0	———	0


						1 3/16"	4 1/4"	1 5/8"	17/32"	4,350	7,600	Steel	Sealed	2°	Sealmaster	3710T52	000000	———	0	———	0
						1 1/4"	4 5/8"	1 13/16"	9/16"	5,750	6,500	Steel	Sealed	2°	Sealmaster	3710T53	000000	———	0	———	0
						1 3/8"	4 5/8"	1 13/16"	9/16"	5,750	6,500	Steel	Sealed	2°	Sealmaster	3710T54	000000	———	0	———	0
						1 7/16"	4 5/8"	1 13/16"	9/16"	5,750	6,500	Steel	Sealed	2°	Sealmaster	3710T55	000000	———	0	———	0
						1 1/2"	5 1/8"	2 5/64"	9/16"	7,300	5,800	Steel	Sealed	2°	Sealmaster	3710T56	000000	———	0	———	0
						1 15/16"	5 5/8"	2 7/32"	9/16"	7,850	5,000	Steel	Sealed	2°	Sealmaster	3710T57	000000	———	0	———	0




Eccentric Lock

5/8"	3"							1 17/32"	7/16"	2,100	9,500	Steel	Sealed	2°	SKF	4071N41	00000	———	0	———	0


3/4"	3 3/8"							1 11/16"	3/8"	2,850	8,500	Steel	Sealed	2°	SKF	4071N42	00000	———	0	———	0
7/8"	3 3/4"	1 3/4"						7/16"	3,100	7,000	Steel	Sealed	2°	SKF	4071N43	00000	———	0	———	0
1"	3 3/4"	1 3/4"	7/16"					3,100	7,000	Steel	Sealed	2°	SKF	4071N44	00000	———	0	———	0
1 1/8"	4 1/4"	1 7/8"	21/32"					4,350	6,300	Steel	Sealed	2°	SKF	4071N45	00000	———	0	———	0
1 3/16"	4 1/4"	1 7/8"	21/32"					4,350	6,300	Steel	Sealed	2°	SKF	4071N46	00000	———	0	———	0
1 1/4"	4 5/8"	2 1/16"	1/2"					5,700	5,300	Steel	Sealed	2°	SKF	4071N47	00000	———	0	———	0
1 3/8"	4 5/8"	2 1/16"	1/2"					5,700	5,300	Steel	Sealed	2°	SKF	4071N48	00000	———	0	———	0
1 7/16"	4 5/8"	2 1/16"	1/2"					5,700	5,300	Steel	Sealed	2°	SKF	4071N49	00000	———	0	———	0
1 1/2"	5 1/8"	2 5/16"	11/16"					6,900	4,800	Steel	Sealed	2°	SKF	4071N51	000000	———	0	———	0
1 3/4"	5 3/8"	2 5/16"	3/4"					7,450	4,300	Steel	Sealed	2°	SKF	4071N52	000000	———	0	———	0


1 15/16"	5 5/8"	2 7/16"	21/32"					7,850	4,000	Steel	Sealed	2°	SKF	4071N53	000000	———	0	———	0
2"	6 3/8"	2 11/16"	23/32"					9,800	3,600	Steel	Sealed	2°	SKF	4071N54	000000	———	0	———	0
20 mm	86 mm	43 mm	11 mm					2,850	8,500	Steel	Sealed	1.5°	SKF	4071N11	000000	———	0	———	0
25 mm	95 mm	42.5 mm	12 mm					3,100	7,000	Steel	Sealed	1.5°	SKF	4071N12	00000	———	0	———	0
30 mm	108 mm	46.7 mm	13 mm					4,350	6,300	Steel	Sealed	1.5°	SKF	4071N14	000000	———	0	———	0
35 mm	118 mm	50.4 mm	13 mm					5,700	5,300	Steel	Sealed	1.5°	SKF	4071N16	000000	———	0	———	0
40 mm	130 mm	57.2 mm	14 mm					6,900	4,800	Steel	Sealed	1.5°	SKF	4071N17	000000	———	0	———	0
45 mm	137 mm	58.9 mm	14 mm					7,450	4,300	Steel	Sealed	1.5°	SKF	4071N21	000000	———	0	———	0
50 mm	143 mm	60.7 mm	15 mm					7,850	4,000	Steel	Sealed	1.5°	SKF	4071N22	000000	———	0	———	0




		Locknut

		25 mm	108 mm					40.5 mm	13 mm	4,350	6,300	Steel	Sealed	1.5°	SKF	4071N26	000000	7835T147	000000	———	0


		45 mm	143 mm					53.1 mm	15 mm	7,850	4,000	Steel	Sealed	1.5°	SKF	4071N29	000000	7835T156	00000	———	0


		Nickel-Plated Cast Iron Housing







										Set Screw

										1/2"	3 3/8"	1 5/16"	7/16"	2,870	5,500	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K51	00000	———	0	———	0


				5/8"	3 3/8"					1 5/16"	7/16"	2,870	5,500	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K52	00000	———	0	———	0
				3/4"	3 3/8"					1 5/16"	7/16"	2,870	5,800	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K32	00000	———	0	———	0
				7/8"	3 3/4"					1 13/32"	1/2"	3,140	5,000	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K53	00000	———	0	———	0
				1"	3 3/4"					1 13/32"	1/2"	3,140	5,100	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K33	00000	———	0	———	0
				1 1/8"	4 1/4"					1 19/32"	1/2"	4,380	4,000	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K54	00000	———	0	———	0
				1 3/16"	4 1/4"					1 19/32"	1/2"	4,380	4,000	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K55	00000	———	0	———	0
				1 1/4"	4 1/4"					1 19/32"	1/2"	4,380	3,500	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K56	00000	———	0	———	0
				1 1/4"	4 19/32"					1 3/4"	19/32"	5,770	3,700	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K35	00000	———	0	———	0
				1 3/8"	4 19/32"					1 3/4"	19/32"	5,770	3,500	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K57	00000	———	0	———	0
				1 7/16"	4 19/32"					1 3/4"	19/32"	5,770	3,500	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K58	00000	———	0	———	0


				1 1/2"	5 1/8"					2 1/32"	19/32"	6,540	3,000	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K59	00000	———	0	———	0
				1 3/4"	5 13/32"					2 1/16"	5/8"	7,660	3,000	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K61	00000	———	0	———	0
				1 15/16"	5 5/8"	2 5/32"				5/8"	7,890	2,500	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K62	00000	———	0	———	0
				2"	5 5/8"	2 5/32"	5/8"			7,890	2,500	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K63	00000	———	0	———	0
				2 1/2"	7 3/8"	2 3/4"	7/8"			12,850	2,000	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K64	000000	———	0	———	0
				25 mm	95 mm	35.8 mm	13 mm			3,140	5,000	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K65	00000	———	0	———	0
				30 mm	108 mm	40.2 mm	13 mm			4,380	4,000	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K66	00000	———	0	———	0


				Polyester Plastic Housing







										Set Screw

										3/4"	3 3/4"	1 3/8"	35/64"	270	700	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K57	000000	———	0	———	0


										1"	3 3/4"	1 3/8"	35/64"	270	700	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K58	000000	———	0	———	0
										1 1/4"	4 13/64"	1 3/8"	35/64"	370	690	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K71	000000	———	0	———	0

Mounted Ball Bearings with Two-Bolt Flange

Smoother than smooth—the balls inside these bearings roll nearly friction-free. The sturdy housing supports the shaft and secures with a two-bolt flange, the most common type of flanged bearing.

Nickel-Plated Cast Iron Housing—Combine the strength of iron with the corrosion resistance of stainless steel at an affordable price point. Nickel-plated iron is also unlikely to chip.

Polyester Plastic Housing—Lightweight and naturally rust-resistant, with a smooth surface that's easy to wipe clean.

PEEK Housing—PEEK resists harsh chemicals and won’t melt or deform at high temperatures. These housings are highly wear-resistant, but they may crack or dent from hard impacts and vibrations.

Press Fit—For a tight connection to the shaft, install with a press or by heating and then cooling the bearing. Also known as an interference fit.

Set Screw—Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces.

SKF—Manufactured in Europe with a strong focus on precision. The more precise the bearing, the more efficiently it will run.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

	Bearings												Replacement Bearings
		Overall
	For Shaft Dia.	Lg.	Wd.	Flange Thk.	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Bearing Material	Bearing Seal Type	Misalignment Capability	Manufacturer		Each		Each
Powder-Coated Cast Iron Housing







				Set Screw

				1/2"	3 7/8"	1 19/64"	7/16"	2,150	9,500	Steel	Sealed	2°	SKF	5968K71	000000	5967K11	000000


				5/8"	3 7/8"	1 19/64"	7/16"	2,100	9,500	Steel	Sealed	2°	SKF	5968K72	00000	———	0
				3/4"	4 7/16"	1 15/32"	7/16"	2,850	8,500	Steel	Sealed	2°	SKF	5968K73	00000	5967K13	00000
				7/8"	4 7/8"	1 33/64"	17/32"	3,100	7,000	Steel	Sealed	2°	SKF	5968K74	00000	———	0
				15/16"	4 7/8"	1 17/32"	17/32"	3,100	7,000	Steel	Sealed	2°	SKF	5968K111	00000	———	0
				1"	4 7/8"	1 33/64"	17/32"	3,100	7,000	Steel	Sealed	2°	SKF	5968K75	00000	5967K15	00000
				1 1/8"	5 9/16"	1 45/64"	17/32"	4,350	6,300	Steel	Sealed	2°	SKF	5968K92	000000	5967K72	00000
				1 3/16"	5 9/16"	1 21/32"	17/32"	4,350	6,300	Steel	Sealed	2°	SKF	5968K76	00000	5967K16	00000
				1 1/4"	5 9/16"	1 21/32"	17/32"	4,350	6,300	Steel	Sealed	2°	SKF	5968K91	00000	5967K17	00000
				1 1/4"	6 1/8"	1 53/64"	9/16"	5,700	5,300	Steel	Sealed	2°	SKF	5968K77	00000	5967K18	00000
				1 3/8"	6 1/8"	1 29/32"	9/16"	5,700	5,300	Steel	Sealed	2°	SKF	5968K112	000000	———	0


				1 7/16"	6 1/8"	1 53/64"	9/16"	5,700	5,300	Steel	Sealed	2°	SKF	5968K78	00000	5967K19	00000
				1 1/2"	6 3/4"	2 11/64"	9/16"	6,900	4,800	Steel	Sealed	2°	SKF	5968K79	000000	5967K21	000000
				1 11/16"	7 1/16"	2 3/16"	9/16"	7,450	4,300	Steel	Sealed	2°	SKF	5968K113	000000	———	0
				1 3/4"	7 1/16"	2"	9/16"	7,450	4,300	Steel	Sealed	2°	SKF	5968K81	000000	5967K22	000000
				1 15/16"	7 7/16"	2 15/32"	9/16"	7,850	4,000	Steel	Sealed	2°	SKF	5968K84	000000	5967K23	000000
				2"	8 1/2"	2 37/64"	13/16"	9,800	3,600	Steel	Sealed	2°	SKF	5968K83	000000	5967K24	000000
				2 3/16"	8 1/2"	2 5/8"	13/16"	9,800	3,600	Steel	Sealed	2°	SKF	5968K114	000000	———	0
				2 1/4"	9 1/4"	2 29/32"	13/16"	11,800	3,400	Steel	Sealed	2°	SKF	5968K115	000000	———	0
				2 7/16"	9 1/4"	2 29/32"	13/16"	11,800	3,400	Steel	Sealed	2°	SKF	5968K116	000000	———	0
				20 mm	111.9 mm	32.5 mm	11.1 mm	2,600	7,300	Steel	Sealed	2°	Sealmaster	1483N1	000000	7835T111	000000


				25 mm	123.8 mm	36.5 mm	13.5 mm	2,800	6,300	Steel	Sealed	2°	Sealmaster	1483N2	000000	7835T112	000000
				30 mm	141.3 mm	39.7 mm	13.5 mm	4,350	5,400	Steel	Sealed	2°	Sealmaster	1483N3	000000	7835T113	000000
				35 mm	155.6 mm	44.5 mm	14.3 mm	5,750	4,600	Steel	Sealed	2°	Sealmaster	1483N4	000000	7835T114	000000
				40 mm	171.5 mm	51.2 mm	14.3 mm	7,300	4,100	Steel	Sealed	2°	Sealmaster	1483N5	000000	7835T115	000000
				45 mm	179.4 mm	52 mm	14.3 mm	7,900	3,800	Steel	Sealed	2°	Sealmaster	1483N6	000000	———	0
				50 mm	189 mm	60.6 mm	15 mm	7,850	4,000	Steel	Sealed	2°	SKF	1483N211	000000	———	0




						Clamp On

						1"	4 7/8"	1 1/2"	17/32"	2,800	9,000	Steel	Sealed	2°	Sealmaster	3710T41	000000	———	0


						1 1/4"	6 1/8"	1 13/16"	9/16"	5,750	6,500	Steel	Sealed	2°	Sealmaster	3710T43	000000	———	0
						1 3/8"	6 1/8"	1 13/16"	9/16"	5,750	6,500	Steel	Sealed	2°	Sealmaster	3710T44	000000	———	0
						1 7/16"	6 1/8"	1 13/16"	9/16"	5,750	6,500	Steel	Sealed	2°	Sealmaster	3710T45	000000	———	0
						1 1/2"	6 3/4"	2 5/64"	9/16"	7,300	5,800	Steel	Sealed	2°	Sealmaster	3710T46	000000	———	0
						1 15/16"	7 7/16"	2 7/32"	9/16"	7,850	5,000	Steel	Sealed	2°	Sealmaster	3710T47	000000	———	0
						2"	8 1/2"	2 3/8"	13/16"	9,750	3,200	Steel	Sealed	2°	Sealmaster	3710T9	000000	———	0




								Eccentric Lock

								5/8"	3 7/8"	1 17/32"	7/16"	2,100	9,500	Steel	Sealed	2°	SKF	5968K118	00000	———	0


3/4"	4 7/16"							1 43/64"	7/16"	2,850	8,500	Steel	Sealed	2°	SKF	5968K119	00000	———	0
7/8"	4 7/8"							1 43/64"	17/32"	3,100	7,000	Steel	Sealed	2°	SKF	5968K121	00000	———	0
1"	4 7/8"							1 43/64"	17/32"	3,100	7,000	Steel	Sealed	2°	SKF	5968K122	00000	———	0
1 1/8"	5 9/16"	1 7/8"						17/32"	4,350	6,300	Steel	Sealed	2°	SKF	5968K123	00000	———	0
1 3/16"	5 9/16"	1 7/8"	17/32"					4,350	6,300	Steel	Sealed	2°	SKF	5968K124	00000	———	0
1 1/4"	6 1/8"	2 1/16"	9/16"					5,700	5,300	Steel	Sealed	2°	SKF	5968K125	00000	———	0
1 3/8"	6 1/8"	2 1/16"	9/16"					5,700	5,300	Steel	Sealed	2°	SKF	5968K126	00000	———	0
1 7/16"	6 1/8"	2 1/16"	9/16"					5,700	5,300	Steel	Sealed	2°	SKF	5968K127	00000	———	0
1 1/2"	6 3/4"	2 9/32"	9/16"					6,900	4,800	Steel	Sealed	2°	SKF	5968K128	00000	———	0
1 3/4"	7 1/16"	2 9/32"	9/16"					7,450	4,300	Steel	Sealed	2°	SKF	5968K129	000000	———	0


1 15/16"	7 7/16"	2 15/32"	9/16"					7,850	4,000	Steel	Sealed	2°	SKF	5968K131	000000	———	0
2"	8 1/2"	2 23/32"	13/16"					9,800	3,600	Steel	Sealed	2°	SKF	5968K132	000000	———	0
17 mm	98.5 mm	39.1 mm	11 mm					2,100	9,500	Steel	Sealed	2°	SKF	1483N111	000000	———	0
20 mm	112 mm	42.5 mm	11 mm					2,850	8,500	Steel	Sealed	2°	SKF	1483N112	000000	———	0
25 mm	124 mm	42.5 mm	12 mm					3,100	7,000	Steel	Sealed	2°	SKF	1483N113	000000	———	0
30 mm	141.5 mm	46.7 mm	13 mm					4,350	6,300	Steel	Sealed	2°	SKF	1483N115	000000	———	0
30 mm	141.5 mm	50.1 mm	13 mm					4,350	6,300	Steel	Sealed	2°	SKF	1483N116	000000	———	0


Nickel-Plated Cast Iron Housing







								Set Screw

								5/8"	3 55/64"	1 5/16"	7/16"	2,870	5,800	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K38	00000	———	0


								3/4"	4 7/16"	1 5/16"	7/16"	2,870	5,800	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K42	00000	———	0
								1"	5 1/8"	1 13/32"	1/2"	3,140	5,100	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K43	00000	———	0
								1 1/4"	5 13/16"	1 19/32"	1/2"	4,380	4,300	Steel	Sealed	1.5°	McMaster-Carr Approved	6494K45	00000	———	0


								Polyester Plastic Housing







										Set Screw

										1/2"	4 1/2"	1 1/4"	7/16"	235	800	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K4	000000	———	0


										5/8"	4 1/2"	1 1/4"	7/16"	235	800	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K41	000000	———	0
										3/4"	4 1/2"	1 1/4"	7/16"	235	800	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K42	000000	———	0
										3/4"	5 5/32"	1 3/8"	17/32"	270	700	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K55	000000	———	0
										7/8"	5 5/32"	1 3/8"	17/32"	270	700	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K43	000000	———	0
										1"	5 5/32"	1 3/8"	17/32"	270	700	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K56	000000	———	0
										1 1/16"	5 53/64"	1 5/8"	9/16"	380	690	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K44	000000	———	0
						1 1/8"				5 53/64"	1 5/8"	9/16"	380	690	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K45	000000	———	0
						1 1/4"	5 53/64"			1 5/8"	9/16"	380	690	316 Stainless Steel	Open	1.5°	McMaster-Carr Approved	7192K47	000000	———	0


						PEEK Housing







												Press Fit

												1/8"	1 5/32"	5/16"	11/64"	125	53,000	440C Stainless Steel	Open	—	McMaster-Carr Approved	4575N21	00000	———	0


												1/8"	1 5/32"	5/16"	11/64"	125	53,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	4575N31	00000	———	0
												3/16"	1 3/8"	3/8"	11/64"	290	38,000	440C Stainless Steel	Open	—	McMaster-Carr Approved	4575N22	00000	———	0
												3/16"	1 3/8"	3/8"	11/64"	290	38,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	4575N32	00000	———	0
												1/4"	1 11/32"	19/64"	11/64"	80	36,000	440C Stainless Steel	Open	—	McMaster-Carr Approved	4575N23	00000	———	0
												1/4"	1 11/32"	19/64"	11/64"	80	36,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	4575N33	00000	———	0
												5/16"	1 1/2"	11/32"	3/16"	120	40,000	440C Stainless Steel	Open	—	McMaster-Carr Approved	4575N24	00000	———	0
												5/16"	1 1/2"	11/32"	3/16"	120	40,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	4575N34	00000	———	0
												3/8"	2 1/8"	31/64"	13/64"	740	32,000	440C Stainless Steel	Open	—	McMaster-Carr Approved	4575N25	00000	———	0
												3/8"	2 1/8"	31/64"	13/64"	740	32,000	440C Stainless Steel	Shielded	—	McMaster-Carr Approved	4575N35	00000	———	0

Light Duty Mounted Ball Bearings with Two-Bolt Flange

With a two-piece housing made from thin pressed metal, these bearings are a cost-effective option when extreme precision isn't necessary. Less stable than bearings with forged, one-piece housings, they're good for hand-cranked systems, gravity feed conveyor rollers, and other low-speed applications. The balls inside roll nearly friction-free to support smooth shaft rotation. The housing mounts in place with a two-bolt flange, the most common type of flanged bearing.

Lubricate regularly to keep your bearing in tip-top shape. These bearings come packed with grease and sealed to block out dust and contaminants.

Steel Housing—Best for dry environments as moisture will cause them to rust.

303 Stainless Steel Housing and 304 Stainless Steel Housing—Prevent rust from exposure to moisture and mild chemicals, including ammonia-based cleaning solutions.

Press Fit—For a tight connection to the shaft, install with a press or by heating and then cooling the bearing. Also known as an interference fit.

Set Screw—Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

		Overall
	For Shaft Dia.	Lg.	Wd.	Flange Thk.	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Bearing Material	Bearing Seal Type	Misalignment Capability		Each
Steel Housing







				Press Fit

				1/8"	1 3/4"	17/64"	1/16"	65	20,000	Steel	Sealed	5°	4473N11	000000


				3/16"	1 3/4"	17/64"	1/16"	65	20,000	Steel	Sealed	5°	4473N12	00000
				1/4"	1 3/4"	17/64"	1/16"	65	20,000	Steel	Sealed	5°	4473N13	00000
				5/16"	1 3/4"	17/64"	1/16"	65	20,000	Steel	Sealed	5°	4473N14	00000
				4 mm	45.2 mm	6.8 mm	1.5 mm	65	20,000	Steel	Sealed	5°	4473N15	00000
				5 mm	45.2 mm	6.8 mm	1.5 mm	65	20,000	Steel	Sealed	5°	4473N16	00000
				6 mm	45.2 mm	6.8 mm	1.5 mm	65	20,000	Steel	Sealed	5°	4473N17	00000
				8 mm	45.2 mm	6.8 mm	1.5 mm	65	20,000	Steel	Sealed	5°	4473N18	00000
				10 mm	53 mm	9.6 mm	2.2 mm	380	18,500	Steel	Sealed	5°	4473N19	00000




						Set Screw

						3/8"	2 1/2"	11/16"	1/32"	580	3,000	Steel	Sealed	—	7208K51	00000


						1/2"	3 3/16"	29/32"	5/32"	2,100	5,800	Steel	Sealed	3°	5913K71	00000
						1/2"	3 3/4"	1"	1/16"	1,600	3,000	Steel	Sealed	—	7208K52	00000
						5/8"	3 3/16"	29/32"	5/32"	2,100	5,800	Steel	Sealed	3°	5913K72	00000
						5/8"	3 3/4"	1"	1/16"	1,600	3,000	Steel	Sealed	—	7208K53	00000
						3/4"	3 17/32"	1 1/64"	5/32"	2,850	5,800	Steel	Sealed	3°	5913K73	00000
						3/4"	4 1/8"	1 1/8"	1/16"	1,850	3,000	Steel	Sealed	—	7208K54	00000
						7/8"	3 3/4"	1 1/8"	5/32"	3,100	5,100	Steel	Sealed	3°	5913K31	00000
						1"	3 3/4"	1 1/8"	5/32"	3,100	5,100	Steel	Sealed	3°	5913K74	00000
						1"	4 1/8"	1 1/8"	1/16"	1,850	3,000	Steel	Sealed	—	7208K55	00000
						1 1/8"	4 7/16"	1 15/64"	5/32"	4,350	4,300	Steel	Sealed	3°	5913K32	00000


						1 3/16"	4 7/16"	1 15/64"	13/64"	4,350	4,300	Steel	Sealed	3°	5913K75	00000
						1 1/4"	4 7/16"	1 15/64"	5/32"	4,350	4,300	Steel	Sealed	3°	5913K33	00000
						1 3/8"	4 13/16"	1 23/64"	5/32"	5,750	3,700	Steel	Sealed	3°	5913K34	00000


						303 Stainless Steel Housing







										Press Fit

										1/8"	1 3/4"	17/64"	1/16"	50	20,000	304 Stainless Steel	Sealed	5°	4461N11	00000


										3/16"	1 3/4"	17/64"	1/16"	50	20,000	304 Stainless Steel	Sealed	5°	4461N12	00000
										1/4"	1 3/4"	17/64"	1/16"	50	20,000	304 Stainless Steel	Sealed	5°	4461N13	00000
										5/16"	1 3/4"	17/64"	1/16"	50	20,000	304 Stainless Steel	Sealed	5°	4461N14	00000
										3/8"	2 3/32"	3/8"	3/32"	320	18,500	304 Stainless Steel	Sealed	5°	4461N15	00000
										4 mm	45.2 mm	6.8 mm	1.5 mm	50	20,000	304 Stainless Steel	Sealed	5°	4461N16	00000
5 mm										45.2 mm	6.8 mm	1.5 mm	50	20,000	304 Stainless Steel	Sealed	5°	4461N17	00000
6 mm	45.2 mm									6.8 mm	1.5 mm	50	20,000	304 Stainless Steel	Sealed	5°	4461N18	00000
8 mm	45.2 mm									6.8 mm	1.5 mm	50	20,000	304 Stainless Steel	Sealed	5°	4461N19	00000
10 mm	53 mm									9.6 mm	2.2 mm	320	18,500	304 Stainless Steel	Sealed	5°	4461N21	00000


304 Stainless Steel Housing







										Set Screw

										5/8"	3 3/16"	1 5/64"	5/32"	1,800	5,800	440C Stainless Steel	Sealed	3°	2431K71	00000


										3/4"	3 9/16"	1 7/32"	5/32"	2,450	5,800	440C Stainless Steel	Sealed	3°	2431K72	00000
										7/8"	3 3/4"	1 11/32"	5/32"	2,650	5,100	440C Stainless Steel	Sealed	3°	2431K81	00000
										1"	3 3/4"	1 11/32"	5/32"	2,650	5,100	440C Stainless Steel	Sealed	3°	2431K73	00000

Light Duty Mounted Ball Bearings

With a two-piece housing made from thin pressed metal, these bearings are a cost-effective option when extreme precision isn't necessary. Less stable than bearings with forged, one-piece housings, they're good for hand-cranked systems, gravity feed conveyor rollers, and other low-speed applications. Inside, the balls roll nearly friction-free to support smooth rotation.

Lubricate regularly to keep your bearing in tip-top shape. These bearings come packed with grease and sealed to block out dust and contaminants.

Steel Housing—Best for dry environments as moisture will cause them to rust.

304 Stainless Steel Housing—Prevent rust from exposure to moisture and mild chemicals, including ammonia-based cleaning solutions.

Set Screw—Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

			Overall
	For Shaft Dia.	Ctr. Ht.	Lg.	Wd.	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Bearing Material	Bearing Seal Type	Misalignment Capability		Each
Steel Housing







				Set Screw

				1/2"	7/8"	3 3/8"	1 1/8"	2,140	5,800	Steel	Sealed	3°	5913K61	000000


				5/8"	7/8"	3 3/8"	1 1/8"	2,140	5,800	Steel	Sealed	3°	5913K62	00000
				3/4"	1"	3 27/32"	1 21/64"	2,870	5,800	Steel	Sealed	3°	5913K63	00000
				7/8"	1 1/8"	4 1/4"	1 25/64"	3,140	5,100	Steel	Sealed	3°	5913K76	00000
				15/16"	1 1/8"	4 1/4"	1 1/4"	3,100	5,000	Steel	Sealed	3°	5913K101	00000
				1"	1 1/8"	4 1/4"	1 25/64"	3,140	5,100	Steel	Sealed	3°	5913K64	00000
				1 1/8"	1 5/16"	4 19/32"	1 39/64"	4,380	4,300	Steel	Sealed	3°	5913K77	00000
				1 3/16"	1 5/16"	4 29/32"	1 1/2"	4,380	4,300	Steel	Sealed	3°	5913K65	00000
				1 1/4"	1 15/16"	4 19/32"	1 1/2"	4,300	4,000	Steel	Sealed	3°	5913K102	00000
				1 3/8"	1 9/16"	5 3/4"	1 39/64"	5,770	3,700	Steel	Sealed	3°	5913K78	00000




						Eccentric Lock

						1/2"	7/8"	3 3/8"	31/32"	2,100	5,500	Steel	Sealed	3°	5913K103	00000


						5/8"	7/8"	3 3/8"	31/32"	2,100	5,500	Steel	Sealed	3°	5913K104	00000
						3/4"	1"	3 27/32"	1 1/4"	2,850	5,500	Steel	Sealed	3°	5913K105	00000
						7/8"	1 1/8"	4 1/4"	1 1/4"	3,100	5,000	Steel	Sealed	3°	5913K106	00000
						15/16"	1 1/8"	4 1/4"	1 1/4"	3,100	5,000	Steel	Sealed	3°	5913K107	00000
						1"	1 1/8"	4 1/4"	1 1/4"	3,100	5,000	Steel	Sealed	3°	5913K108	00000
						1 1/8"	1 15/16"	4 19/32"	1 1/2"	4,300	4,000	Steel	Sealed	3°	5913K109	00000
						1 3/16"	1 15/16"	4 19/32"	1 1/2"	4,300	4,000	Steel	Sealed	3°	5913K111	00000
						1 1/4"	1 15/16"	4 19/32"	1 1/2"	4,300	4,000	Steel	Sealed	3°	5913K112	00000


						304 Stainless Steel Housing







										Set Screw

										5/8"	7/8"	3 5/8"	1 1/8"	1,830	5,800	440C Stainless Steel	Sealed	3°	2353K31	00000


										3/4"	1"	4 1/8"	1 1/4"	2,450	5,800	440C Stainless Steel	Sealed	3°	2353K32	00000
										1"	1 1/8"	4 1/2"	1 3/8"	2,670	5,100	440C Stainless Steel	Sealed	3°	2353K33	00000
										1 3/16"	1 5/16"	4 7/8"	1 1/2"	3,700	4,300	440C Stainless Steel	Sealed	3°	2353K34	00000

Dry-Running Mounted Sleeve Bearings

Leave the lubricant in the supply closet—these low-maintenance bearings are made from naturally slippery plastic. They'll keep shafts spinning with no messy grease to drip off, wash out, or collect dust. With no moving parts, sleeve bearings stand up to grimy environments better than ball bearings. However, with more friction generated, they're less effective at high speeds. The sturdy housing bolts down to support shafts as they turn.

Acetal—The most common choice for plastic bearings, acetal is wear-resistant and affordable.

Ultra-Low-Friction PTFE-Filled Acetal—Made from a special blend of acetal and PTFE, these extra-slippery bearings are ideal for conveyors and other machinery with frequent starts and stops.

High-Load Bronze-Backed PTFE—Reinforced with metal, these slick PTFE bearings carry load ratings at least seven times greater than any plastic alternative. The slippery material is a good fit for conveyors and other machinery with frequent starts and stops.

Aluminum Housing—One-third the weight of cast iron but not as strong. Aluminum also resists corrosion.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

			Overall
	For Shaft Dia.	Ctr. Ht.	Lg.	Wd.	Dynamic Radial Load Cap. @ Speed	Misalignment Capability		Each
Acetal Bearing with Aluminum Housing



		1/4"	3/8"	1 7/16"	3/8"	35 lb. @ 120 rpm	5°	4393N11	000000


		1/4"	9/16"	2 1/4"	25/64"	37 lb. @ 120 rpm	5°	4393N12	00000
		5/16"	9/16"	2 1/4"	7/16"	41 lb. @ 120 rpm	5°	4393N13	00000
		3/8"	9/16"	2 1/4"	7/16"	41 lb. @ 120 rpm	5°	4393N14	00000
		1/2"	9/16"	2 1/4"	5/8"	55 lb. @ 120 rpm	5°	4393N15	00000
		1/2"	3/4"	3 1/4"	5/8"	55 lb. @ 120 rpm	5°	4393N16	00000
		5/8"	3/4"	3 1/4"	25/32"	145 lb. @ 60 rpm	5°	4393N17	00000
		3/4"	3/4"	3 1/4"	55/64"	160 lb. @ 60 rpm	5°	4393N18	00000
		3/4"	1"	4"	55/64"	160 lb. @ 60 rpm	5°	4393N19	00000
		7/8"	1"	4"	29/32"	170 lb. @ 60 rpm	5°	4393N21	00000
		1"	1 1/4"	5"	29/32"	170 lb. @ 60 rpm	5°	4393N22	00000


		6 mm	9.5 mm	36.6 mm	9.7 mm	36 lb. @ 120 rpm	5°	4393N23	00000
		6 mm	14.5 mm	57.2 mm	9.8 mm	36 lb. @ 120 rpm	5°	4393N24	00000
		8 mm	14.5 mm	57.2 mm	11.2 mm	42 lb. @ 120 rpm	5°	4393N25	00000
		10 mm	14.5 mm	57.2 mm	11.2 mm	42 lb. @ 120 rpm	5°	4393N26	00000
		12 mm	14.5 mm	57.2 mm	16 mm	60 lb. @ 120 rpm	5°	4393N27	00000
		15 mm	19 mm	82.6 mm	19.8 mm	145 lb. @ 60 rpm	5°	4393N29	00000
		16 mm	19 mm	82.6 mm	19.8 mm	145 lb. @ 60 rpm	5°	4393N31	00000
		20 mm	19 mm	82.6 mm	21.5 mm	160 lb. @ 60 rpm	5°	4393N33	00000
		25 mm	32 mm	127 mm	22.8 mm	170 lb. @ 60 rpm	5°	4393N34	00000


		Ultra-Low-Friction PTFE-Filled Acetal Bearing with Aluminum Housing



				1/4"	3/8"	1 7/16"	3/8"	80 lb. @ 120 rpm	5°	5202N11	00000


				1/4"	9/16"	2 1/4"	3/8"	80 lb. @ 120 rpm	5°	5202N12	00000
				5/16"	9/16"	2 1/4"	7/16"	95 lb. @ 120 rpm	5°	5202N13	00000
				3/8"	9/16"	2 1/4"	7/16"	95 lb. @ 120 rpm	5°	5202N14	00000
				1/2"	9/16"	2 1/4"	5/8"	135 lb. @ 120 rpm	5°	5202N15	00000
				1/2"	3/4"	3 1/4"	5/8"	135 lb. @ 120 rpm	5°	5202N16	00000
				5/8"	3/4"	3 1/4"	0.78"	340 lb. @ 60 rpm	5°	5202N17	00000
				3/4"	3/4"	3 1/4"	0.85"	370 lb. @ 60 rpm	5°	5202N18	00000
				3/4"	1"	4"	0.85"	370 lb. @ 60 rpm	5°	5202N19	00000
				1"	1 1/4"	5"	0.9"	400 lb. @ 60 rpm	5°	5202N22	00000
				6 mm	9.5 mm	36.5 mm	9.7 mm	80 lb. @ 120 rpm	5°	5202N23	00000


				8 mm	14.3 mm	57.2 mm	11.2 mm	95 lb. @ 120 rpm	5°	5202N25	00000
				10 mm	14.3 mm	57.2 mm	11.2 mm	95 lb. @ 120 rpm	5°	5202N26	00000
				12 mm	14.3 mm	57.2 mm	16 mm	140 lb. @ 120 rpm	5°	5202N27	00000
				16 mm	19.1 mm	82.6 mm	19.8 mm	340 lb. @ 60 rpm	5°	5202N31	00000


				High-Load Bronze-Backed PTFE Bearing with Aluminum Housing



						1/4"	9/16"	2 1/4"	7/16"	690 lb. @ 120 rpm	5°	2820T3	00000


						5/16"	9/16"	2 1/4"	7/16"	690 lb. @ 120 rpm	5°	2820T4	00000
						3/8"	9/16"	2 1/4"	5/8"	990 lb. @ 120 rpm	5°	2820T5	00000
						1/2"	3/4"	3 1/4"	25/32"	1,200 lb. @ 120 rpm	5°	2820T6	00000
5/8"						3/4"	3 1/4"	55/64"	2,700 lb. @ 60 rpm	5°	2820T7	00000
3/4"	3/4"					3 1/4"	55/64"	2,700 lb. @ 60 rpm	5°	2820T8	00000
3/4"	1"					4"	7/8"	2,750 lb. @ 60 rpm	5°	2820T51	00000
1"	1 1/4"					5"	29/32"	2,850 lb. @ 60 rpm	5°	2820T9	00000
6 mm	14.5 mm					57 mm	11.2 mm	700 lb. @ 120 rpm	5°	2820T52	00000
8 mm	14.5 mm					57 mm	11.2 mm	700 lb. @ 120 rpm	5°	2820T53	00000
10 mm	14 mm					57 mm	16 mm	1,000 lb. @ 120 rpm	5°	2820T54	00000


12 mm	14.5 mm					57 mm	16 mm	1,000 lb. @ 120 rpm	5°	2820T55	00000
15 mm	19 mm					82.5 mm	20 mm	2,500 lb. @ 60 rpm	5°	2820T56	00000
16 mm	19 mm					82.5 mm	19.8 mm	2,450 lb. @ 60 rpm	5°	2820T57	00000
20 mm	25.5 mm					101.5 mm	21.5 mm	2,650 lb. @ 60 rpm	5°	2820T59	00000
25 mm	32 mm					127 mm	22.8 mm	2,850 lb. @ 60 rpm	5°	2820T61	00000

Extra-Clearance Mounted Ball Bearings

Good for bulky setups, the tall design doubles the clearance between the shaft and the mounting surface. The balls roll nearly friction-free within a sturdy housing to support smooth rotation.

Lubricate regularly to keep your bearings in tip-top shape. These bearings come packed with grease and sealed to block out dust and contaminants.

Set Screw—Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

			Overall
	For Shaft Dia.	Ctr. Ht.	Lg.	Wd.	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Bearing Material	Bearing Seal Type	Misalignment Capability		Each
Powder-Coated Cast Iron Housing







				Set Screw

				1/2"	2 3/4"	5"	1 9/16"	2,850	5,500	Steel	Sealed	2°	4453N11	000000


				5/8"	2 3/4"	5"	1 9/16"	2,850	5,500	Steel	Sealed	2°	4453N12	00000
				3/4"	2 3/4"	5"	1 9/16"	2,850	5,500	Steel	Sealed	2°	4453N13	00000
				7/8"	3 5/32"	5 1/2"	1 31/32"	3,100	5,000	Steel	Sealed	2°	4453N14	00000
				15/16"	3 5/32"	5 1/2"	1 31/32"	3,100	5,000	Steel	Sealed	2°	4453N15	00000
				1"	3 5/32"	5 1/2"	1 31/32"	3,100	5,000	Steel	Sealed	2°	4453N16	00000
				1 1/8"	3 35/64"	6 1/2"	1 31/32"	4,350	4,000	Steel	Sealed	2°	4453N17	00000
				1 3/16"	3 35/64"	6 1/2"	1 31/32"	4,350	4,000	Steel	Sealed	2°	4453N18	00000
				1 1/4"	3 35/64"	6 1/2"	1 31/32"	4,350	4,000	Steel	Sealed	2°	4453N19	00000
				1 1/4"	3 47/64"	6 9/16"	2 3/8"	5,750	3,500	Steel	Sealed	2°	4453N21	00000
				1 5/16"	3 47/64"	6 9/16"	2 3/8"	5,750	3,500	Steel	Sealed	2°	4453N22	00000


				1 3/8"	3 47/64"	6 9/16"	2 3/8"	5,750	3,500	Steel	Sealed	2°	4453N23	00000
				1 7/16"	3 47/64"	6 9/16"	2 3/8"	5,750	3,500	Steel	Sealed	2°	4453N24	00000
				1 1/2"	3 15/16"	7 1/4"	2 3/4"	6,500	3,000	Steel	Sealed	2°	4453N25	00000
				1 9/16"	3 15/16"	7 1/4"	2 3/4"	6,500	3,000	Steel	Sealed	2°	4453N26	00000
				1 5/8"	4 9/64"	7 15/32"	2 3/4"	7,650	3,000	Steel	Sealed	2°	4453N27	00000
				1 11/16"	4 9/64"	7 15/32"	2 3/4"	7,650	3,000	Steel	Sealed	2°	4453N28	00000
				1 3/4"	4 9/64"	7 15/32"	2 3/4"	7,650	3,000	Steel	Sealed	2°	4453N29	00000
				1 7/8"	4 21/64"	8 1/8"	2 3/4"	7,850	2,500	Steel	Sealed	2°	4453N31	00000
				1 15/16"	4 21/64"	8 1/8"	2 3/4"	7,850	2,500	Steel	Sealed	2°	4453N32	00000
				2"	4 21/64"	8 1/8"	2 3/4"	7,850	2,500	Steel	Sealed	2°	4453N33	00000

Mounted Ball Bearings with Three-Bolt Flange

Smoother than smooth—the balls roll nearly friction-free within a sturdy housing to support shafts as they turn. A good choice for tight spaces, these bearings mount with a three-bolt flange that only requires access from one side during installation.

Lubricate regularly to keep your bearing in tip-top shape. These bearings come packed with grease and sealed to block out dust and contaminants.

Nickel-Plated Cast Iron Housing—Combine the strength of iron with the corrosion resistance of stainless steel at an affordable price point. Nickel-plated iron is also unlikely to chip.

Set Screw—Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

			Overall
	For Shaft Dia.	Ctr. Ht.	Lg.	Wd.	Flange Thk.	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Bearing Material	Bearing Seal Type	Misalignment Capability		Each
Nickel-Plated Cast Iron Housing







				Set Screw

				1/2"	2 23/32"	2 7/16"	1 1/4"	1/2"	2,850	5,500	Steel	Sealed	3°	8260K46	000000


				5/8"	2 23/32"	2 7/16"	1 1/4"	1/2"	2,850	5,500	Steel	Sealed	3°	8260K47	00000
				3/4"	3"	2 1/2"	1 11/32"	5/16"	2,200	7,500	Steel	Sealed	2°	8260K11	000000
				7/8"	3 3/8"	2 3/4"	1 29/64"	3/8"	2,400	6,800	Steel	Sealed	2°	8260K12	000000
				15/16"	2 53/64"	2 11/16"	1 3/8"	1/2"	3,100	5,000	Steel	Sealed	3°	8260K48	00000
				1"	3 3/8"	2 3/4"	1 29/64"	3/8"	2,400	6,800	Steel	Sealed	2°	8260K14	000000
				1 1/8"	3 3/4"	3 1/4"	1 5/8"	3/8"	3,350	5,600	Steel	Sealed	2°	8260K15	000000
				1 3/16"	3 3/4"	3 1/4"	1 5/8"	3/8"	3,350	5,600	Steel	Sealed	2°	8260K16	000000
				1 1/4"	3 3/4"	3 1/4"	1 5/8"	3/8"	3,350	5,600	Steel	Sealed	2°	8260K17	000000
				1 1/4"	4 1/4"	3 3/4"	1 59/64"	1/2"	4,450	4,800	Steel	Sealed	2°	8260K18	000000
				1 5/16"	3 7/16"	3 17/32"	1 3/4"	19/32"	5,750	3,500	Steel	Sealed	3°	8260K49	00000


				1 3/8"	4 1/4"	3 3/4"	1 59/64"	1/2"	4,450	4,800	Steel	Sealed	2°	8260K19	000000
				1 7/16"	4 1/4"	3 3/4"	1 59/64"	1/2"	4,450	4,800	Steel	Sealed	2°	8260K21	000000
				1 1/2"	3 31/32"	3 15/16"	1 31/32"	5/8"	6,500	3,000	Steel	Sealed	3°	8260K51	00000
				1 5/8"	4 1/4"	4 3/16"	1 31/32"	23/32"	7,650	3,000	Steel	Sealed	3°	8260K52	00000
				1 11/16"	4 1/4"	4 3/16"	1 31/32"	23/32"	7,650	3,000	Steel	Sealed	3°	8260K53	00000
				1 3/4"	4 1/4"	4 3/16"	1 31/32"	23/32"	7,650	3,000	Steel	Sealed	3°	8260K54	00000
				1 15/16"	4 17/32"	4 13/32"	2 1/16"	23/32"	7,850	2,500	Steel	Sealed	3°	8260K55	00000
				2"	4 17/32"	4 13/32"	2 1/16"	23/32"	7,850	2,500	Steel	Sealed	3°	8260K56	00000

Mounted Tapered-Roller Bearings with Four-Bolt Flange

Support heavier loads than mounted ball bearings, but at lower speeds. These bearings also withstand thrust loads, which are forces acting parallel to the shaft. The four-bolt flange supports shafts with a stronger connection to the mounting surface than two-bolt alternatives.

Lubricate your bearings regularly to keep them in tip-top shape. These bearings come packed with grease and sealed to block out dust and contaminants.

Set Screw—Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces.

		Overall			Dynamic Load Cap., lb.
	For Shaft Dia.	Lg.	Wd.	Flange Thk.	Radial	Thrust	Max. Rotation Speed, rpm	Bearing Material	Bearing Seal Type		Each
Powder-Coated Cast Iron Housing







				Set Screw

				1 1/4"	3 3/4"	2 13/16"	1"	3,800	2,000	4,400	Steel	Sealed	1498N11	0000000


				1 1/2"	5 3/8"	3 1/2"	1 3/16"	7,850	2,550	3,300	Steel	Sealed	1498N12	000000
				1 3/4"	5 5/8"	3 5/8"	1 3/16"	10,300	2,550	3,000	Steel	Sealed	1498N13	000000
				2"	5 5/8"	3 5/8"	1 3/16"	10,300	2,550	3,000	Steel	Sealed	1498N14	000000
				2 1/2"	6 7/8"	4 3/16"	1 1/2"	11,600	3,450	2,400	Steel	Sealed	1498N15	000000
				3"	7 3/4"	4 11/16"	1 5/8"	12,300	5,150	2,000	Steel	Sealed	1498N16	000000
				3 1/2"	9 1/4"	5 1/4"	1 7/8"	19,600	5,150	1,600	Steel	Sealed	1498N17	00000000
				4"	10 1/4"	6 1/2"	2 1/8"	26,900	6,900	1,500	Steel	Sealed	1498N18	00000000
				35 mm	4 5/8"	3 1/16"	1 1/16"	6,100	2,550	3,800	Steel	Sealed	1498N19	000000
				50 mm	5 5/8"	3 5/8"	1 3/16"	10,300	2,550	3,000	Steel	Sealed	1498N23	000000

Dry-Running Mounted Sleeve Bearings with Two-Bolt Flange

Acetal—The most common choice for plastic bearings, acetal is wear-resistant and affordable.

Ultra-Low-Friction PTFE-Filled Acetal—Made from a special blend of acetal and PTFE, these extra-slippery bearings are ideal for conveyors and other machinery with frequent starts and stops.

Aluminum Housing—One-third the weight of cast iron but not as strong. Aluminum also resists corrosion.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

		Overall
	For Shaft Dia.	Lg.	Wd.	Flange Thk.	Dynamic Radial Load Cap. @ Speed	Misalignment Capability		Each
Acetal Bearing with Aluminum Housing



		1/4"	1 5/8"	25/64"	3/16"	37 lb. @ 120 rpm	5°	8420N111	000000


		3/8"	2 1/4"	7/16"	3/16"	41 lb. @ 120 rpm	5°	8420N113	00000
		1/2"	2 1/4"	5/8"	3/16"	55 lb. @ 120 rpm	5°	8420N114	00000
		1/2"	3 1/4"	5/8"	1/4"	55 lb. @ 120 rpm	5°	8420N115	00000
		5/8"	3 1/4"	25/32"	1/4"	145 lb. @ 60 rpm	5°	8420N116	00000
		7/8"	4"	29/32"	5/16"	170 lb. @ 60 rpm	5°	8420N118	00000
		1"	5"	29/32"	3/8"	170 lb. @ 60 rpm	5°	8420N119	00000
		6 mm	41.5 mm	10 mm	4.8 mm	37 lb. @ 120 rpm	5°	8420N121	00000
		8 mm	57 mm	11.5 mm	4.8 mm	43 lb. @ 120 rpm	5°	8420N122	00000
		10 mm	57 mm	11.5 mm	4.8 mm	43 lb. @ 120 rpm	5°	8420N123	00000
		12 mm	57 mm	16 mm	4.8 mm	60 lb. @ 120 rpm	5°	8420N124	00000


		16 mm	82.5 mm	19.5 mm	6.4 mm	145 lb. @ 60 rpm	5°	8420N127	00000
		20 mm	82.5 mm	21.5 mm	6.4 mm	160 lb. @ 60 rpm	5°	8420N129	00000


		Ultra-Low-Friction PTFE-Filled Acetal Bearing with Aluminum Housing



				1/4"	1 5/8"	25/64"	3/16"	85 lb. @ 120 rpm	5°	4385N111	00000


				3/8"	2 1/4"	7/16"	3/16"	95 lb. @ 120 rpm	5°	4385N113	00000
				1/2"	2 1/4"	5/8"	3/16"	135 lb. @ 120 rpm	5°	4385N114	00000
				1/2"	3 1/4"	5/8"	1/4"	135 lb. @ 120 rpm	5°	4385N115	00000
				3/4"	3 1/4"	27/32"	1/4"	370 lb. @ 60 rpm	5°	4385N117	00000
				8 mm	57.2 mm	11.2 mm	4.8 mm	95 lb. @ 120 rpm	5°	4385N122	00000
				10 mm	57.2 mm	16 mm	4.8 mm	140 lb. @ 120 rpm	5°	4385N123	00000
				12 mm	82.6 mm	16 mm	6.4 mm	140 lb. @ 120 rpm	5°	4385N125	00000
				16 mm	82.6 mm	19.8 mm	6.4 mm	340 lb. @ 60 rpm	5°	4385N127	00000
				20 mm	82.6 mm	21.5 mm	6.4 mm	370 lb. @ 60 rpm	5°	4385N129	00000


				High-Load Bronze-Backed PTFE Bearing with Aluminum Housing



						1/4"	2 1/4"	7/16"	3/16"	690 lb. @ 120 rpm	5°	2820T33	00000


						5/16"	2 1/4"	7/16"	3/16"	690 lb. @ 120 rpm	5°	2820T34	00000
						3/8"	2 1/4"	5/8"	3/16"	990 lb. @ 120 rpm	5°	2820T35	00000
						1/2"	3 1/4"	25/32"	1/4"	1,200 lb. @ 120 rpm	5°	2820T36	00000
						5/8"	3 1/4"	55/64"	1/4"	2,700 lb. @ 60 rpm	5°	2820T37	00000
						3/4"	3 1/4"	55/64"	1/4"	2,700 lb. @ 60 rpm	5°	2820T38	00000
						1"	5"	29/32"	3/8"	2,850 lb. @ 60 rpm	5°	2820T39	00000
						6 mm	57 mm	11.5 mm	4.8 mm	720 lb. @ 120 rpm	5°	2820T41	00000
						8 mm	57 mm	11.5 mm	4.8 mm	720 lb. @ 120 rpm	5°	2820T42	00000
						12 mm	57 mm	16 mm	4.8 mm	1,000 lb. @ 120 rpm	5°	2820T43	00000
						15 mm	82.5 mm	19.5 mm	6.4 mm	2,400 lb. @ 60 rpm	5°	2820T44	00000


						25 mm	127 mm	23 mm	9.5 mm	2,850 lb. @ 60 rpm	5°	2820T45	00000

Food-and-Beverage Mounted Ball Bearings with Three-Bolt Flange

Packed with NSF-registered H1 grease, these bearings are safe for use on food and beverage lines. Install them into conveyors, packaging systems, and other food processing applications where contact with ingredients is rare but possible. The balls roll nearly friction-free within a sturdy housing to support shafts as they turn. A good choice for tight spaces, these bearings mount with a three-bolt flange that only requires access from one side during installation.

Lubricate your bearings regularly to keep them in tip-top shape. Seals block out dust and contaminants.

304 Stainless Steel Housing—Prevent rust from exposure to moisture and mild chemicals, including ammonia-based cleaning solutions.

Polybutylene Housing—Lightweight and naturally rust-resistant, with a smooth surface that's easy to wipe clean.

Set Screw—Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

Closed Caps—Mount on the end of the shaft to block out debris and prevent accidental contact with rotating parts.

	Bearings													Closed Caps
			Overall
	For Shaft Dia.	Ctr. Ht.	Lg.	Wd.	Flange Thk.	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Bearing Material	Bearing Seal Type	Misalignment Capability	Enclosure Rating		Each		Each
304 Stainless Steel Housing







				Set Screw

				1/2"	2 9/16"	2 1/2"	1 13/64"	5/16"	2,400	620	440 Stainless Steel	Sealed	2.5°	IP69K	4454N11	0000000	———	0


				5/8"	2 9/16"	2 1/2"	1 13/64"	5/16"	2,400	620	440 Stainless Steel	Sealed	2.5°	IP69K	4454N12	000000	———	0
				3/4"	2 9/16"	2 1/2"	1 13/64"	5/16"	2,400	620	440 Stainless Steel	Sealed	2.5°	IP69K	4454N13	000000	———	0
				3/4"	2 37/64"	2 3/8"	1 5/16"	5/16"	2,250	5,900	440 Stainless Steel	Sealed	2°	—	8260K22	000000	8260K41	000000
				1"	2 23/32"	2 41/64"	1 13/32"	1/2"	2,450	5,100	440 Stainless Steel	Sealed	2°	—	8260K23	000000	8260K42	00000
				1"	2 15/16"	2 3/4"	1 27/64"	3/8"	2,650	550	440 Stainless Steel	Sealed	2.5°	IP69K	4454N14	000000	———	0
				1 1/4"	2 23/32"	3 1/8"	1 37/64"	1/2"	3,400	4,300	440 Stainless Steel	Sealed	2°	—	8260K24	000000	8260K43	00000
				1 1/4"	2 53/64"	3 35/64"	1 3/4"	1/2"	4,500	3,700	440 Stainless Steel	Sealed	2°	—	8260K25	000000	8260K44	00000
				1 1/4"	3 5/16"	3 1/4"	1 37/64"	3/8"	3,700	480	440 Stainless Steel	Sealed	2.5°	IP69K	4454N15	000000	———	0
				1 1/4"	3 5/8"	3 3/4"	1 53/64"	1/2"	4,900	410	440 Stainless Steel	Sealed	2.5°	IP69K	4454N16	000000	———	0
				1 7/16"	3 7/16"	3 35/64"	1 3/4"	19/32"	4,500	3,700	440 Stainless Steel	Sealed	2°	—	8260K26	000000	8260K44	00000


				1 7/16"	3 5/8"	3 3/4"	1 53/64"	1/2"	4,900	410	440 Stainless Steel	Sealed	2.5°	IP69K	4454N17	000000	———	0
				1 1/2"	3 31/32"	3 15/16"	1 1/64"	5/8"	5,100	3,300	440 Stainless Steel	Sealed	2°	—	8260K27	000000	8260K45	00000
				2"	4 9/16"	4 5/8"	2 7/32"	1/2"	6,550	240	440 Stainless Steel	Sealed	2.5°	IP69K	4454N18	000000	———	0
				20 mm	65.5 mm	64 mm	34.5 mm	8 mm	2,400	620	440 Stainless Steel	Sealed	2.5°	IP69K	4454N19	000000	———	0
				25 mm	74.6 mm	70 mm	35.1 mm	9.5 mm	2,650	550	440 Stainless Steel	Sealed	2.5°	IP69K	4454N21	000000	———	0
				30 mm	84.2 mm	83 mm	40.1 mm	9.5 mm	3,700	480	440 Stainless Steel	Sealed	2.5°	IP69K	4454N22	000000	———	0
				35 mm	92.1 mm	95 mm	46.5 mm	13 mm	4,900	410	440 Stainless Steel	Sealed	2.5°	IP69K	4454N23	000000	———	0
				50 mm	115.9 mm	118 mm	54.9 mm	13 mm	6,550	240	440 Stainless Steel	Sealed	2.5°	IP69K	4454N24	000000	———	0


				Polybutylene Housing







								Set Screw

								3/4"	3"	2 1/2"	1 21/64"	23/32"	2,250	5,900	440 Stainless Steel	Sealed	2°	—	8260K28	000000	8260K35	00000


								1"	3 3/8"	2 49/64"	1 5/8"	23/32"	2,450	5,100	440 Stainless Steel	Sealed	2°	—	8260K29	000000	8260K36	00000
								1 1/4"	3 13/16"	3 17/64"	1 5/8"	23/32"	3,400	4,300	440 Stainless Steel	Sealed	2°	—	8260K31	000000	8260K37	00000
								1 1/4"	4 5/16"	3 47/64"	1 55/64"	23/32"	4,500	3,700	440 Stainless Steel	Sealed	2°	—	8260K32	000000	8260K38	00000
								1 7/16"	4 5/16"	3 47/64"	1 55/64"	23/32"	4,500	3,700	440 Stainless Steel	Sealed	2°	—	8260K33	000000	8260K38	00000
								1 1/2"	4 5/16"	3 29/32"	2 3/64"	5/8"	5,100	3,300	440 Stainless Steel	Sealed	2°	—	8260K34	000000	8260K39	00000

Permanently Lubricated Mounted Ball Bearings

Reduce upkeep with bearings that never need lubrication. Inside, an oil-infused solid polymer fills the spaces between the balls to keep them rolling nearly friction-free. The polymer releases the optimal amount of lubricant on startup—never too much or too little. The embedded oil never leaks out, and seals keep dust and contaminants from sneaking in. The sturdy housing bolts down to support shafts as they turn.

Set Screw—Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

			Overall
	For Shaft Dia.	Ctr. Ht.	Lg.	Wd.	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Bearing Material	Bearing Seal Type	Misalignment Capability		Each
Powder-Coated Cast Iron Housing







				Set Screw

				3/4"	1 5/16"	5"	1 15/32"	2,850	6,400	Steel	Sealed	2°	5057N11	0000000


				1"	1 7/16"	5 1/2"	1 17/32"	3,150	5,600	Steel	Sealed	2°	5057N1	000000
				1 3/16"	1 11/16"	6 1/2"	1 13/16"	4,400	4,600	Steel	Sealed	2°	5057N5	000000
				1 1/4"	1 7/8"	6 9/16"	1 15/16"	5,750	4,000	Steel	Sealed	2°	5057N3	000000
				1 7/16"	1 7/8"	6 9/16"	1 15/16"	5,750	4,000	Steel	Sealed	2°	5057N7	000000
				1 1/2"	1 15/16"	7 1/4"	2 1/4"	6,550	3,500	Steel	Sealed	2°	5057N2	000000
				1 3/4"	2 1/8"	7 15/32"	2 1/4"	7,350	3,300	Steel	Sealed	2°	5057N6	000000
				1 15/16"	2 1/4"	8 1/8"	2 3/8"	7,900	2,900	Steel	Sealed	2°	5057N4	000000
				2"	2 1/2"	8 5/8"	2 1/2"	9,750	2,700	Steel	Sealed	2°	5057N8	000000
				2 3/16"	2 1/2"	8 5/8"	2 3/8"	9,750	2,400	Steel	Sealed	2°	5057N101	000000
				2 7/16"	2 3/4"	9 1/2"	2 15/16"	11,800	2,400	Steel	Sealed	2°	5057N9	000000

Mounted Needle-Roller Bearings with Two-Bolt Flange

Slim but sturdy, needle roller bearings have a thinner profile than ball bearings. They're better than other roller bearings at handling light loads at high speeds. The solid housing supports the shaft and secures with a two-bolt flange, the most common type of flanged bearing.

Lubricate your bearings regularly to keep them in tip-top shape. These bearings are not sealed, which may attract dust and debris in the grease.

Steel Housing—Best for dry environments as moisture will cause them to rust.

Press Fit—Mount directly onto a hardened and ground shaft.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

		Overall
	For Shaft Dia.	Lg.	Wd.	Flange Thk.	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Bearing Material	Bearing Seal Type	Misalignment Capability		Each
Steel Housing







				Press Fit

				1/8"	1 25/32"	5/16"	3/64"	240	31,500	Steel	Open	—	1434K73	000000


				1/8"	1 25/32"	13/32"	3/64"	240	28,800	Steel	Open	5°	1434K61	00000
				3/16"	1 25/32"	1/2"	3/64"	620	21,000	Steel	Open	—	1434K74	00000
				3/16"	2 3/32"	15/32"	1/16"	630	24,000	Steel	Open	5°	1434K62	00000
				1/4"	2 3/32"	15/32"	1/16"	570	21,000	Steel	Open	5°	1434K43	00000
				1/4"	2 3/32"	15/32"	1/16"	570	44,000	Steel	Open	—	1434K75	00000
				5/16"	1 25/32"	21/32"	3/32"	650	17,400	Steel	Open	5°	1434K24	00000
				5/16"	2 3/32"	15/32"	1/16"	650	35,500	Steel	Open	—	1434K76	00000
				3/8"	1 25/32"	15/32"	3/32"	650	29,500	Steel	Open	—	1434K77	00000
				3/8"	1 25/32"	21/32"	3/32"	650	15,000	Steel	Open	5°	1434K25	00000
				1/2"	2 1/8"	1/2"	3/32"	1,000	22,000	Steel	Open	—	1434K78	00000


				1/2"	2 11/32"	25/32"	3/32"	1,000	11,400	Steel	Open	5°	1434K6	00000
				5/8"	2 11/32"	57/64"	3/32"	1,800	9,600	Steel	Open	5°	1434K63	00000
				5/8"	2 3/8"	21/32"	3/32"	1,800	17,600	Steel	Open	—	1434K79	00000
				3/4"	2 11/32"	21/32"	3/32"	2,200	14,700	Steel	Open	—	1434K81	00000
				3/4"	3 1/4"	29/32"	3/32"	2,200	7,800	Steel	Open	5°	1434K64	00000
				4 mm	53 mm	11.6 mm	1.5 mm	400	25,500	Steel	Open	5°	1434K65	00000
				6 mm	53 mm	11.6 mm	1.5 mm	450	21,900	Steel	Open	5°	1434K66	00000
				6 mm	53.2 mm	10.8 mm	1.5 mm	450	35,000	Steel	Open	—	1434K83	00000
				8 mm	45 mm	16.8 mm	2.3 mm	610	17,700	Steel	Open	5°	1434K33	00000
				8 mm	53.2 mm	11.1 mm	1.5 mm	620	28,000	Steel	Open	—	1434K84	00000


				10 mm	45 mm	16.8 mm	2.3 mm	980	14,580	Steel	Open	5°	1434K34	00000
				10 mm	45.2 mm	12.7 mm	2.3 mm	990	23,000	Steel	Open	—	1434K85	00000
				12 mm	45.2 mm	12.7 mm	2.3 mm	1,100	20,000	Steel	Open	—	1434K86	00000
				12 mm	60 mm	19.8 mm	2.3 mm	1,100	12,420	Steel	Open	5°	1434K15	00000
				15 mm	59.8 mm	12.7 mm	2.3 mm	1,750	16,000	Steel	Open	—	1434K87	00000

Oil-Embedded Mounted Sleeve Bearings

Reduce upkeep with sleeve bearings that lubricate themselves. Made from porous, oil-saturated bronze, they release a thin film of lubrication upon startup to keep shafts spinning. With no moving parts, they withstand dusty, dirty environments better than ball bearings. However, with more friction generated, they're less effective at high speeds. The sturdy housing bolts down to support shafts as they turn.

Aluminum Housing—One-third the weight of cast iron but not as strong. Aluminum also resists corrosion.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

			Overall
	For Shaft Dia.	Ctr. Ht.	Lg.	Wd.	Dynamic Radial Load Cap. @ Speed	Misalignment Capability		Each
840 Bearing Bronze Bearing with Aluminum Housing



		3/16"	3/8"	1 7/16"	3/8"	140 lb. @ 120 rpm	5°	5912K62	000000


		1/4"	9/16"	2 1/4"	3/8"	185 lb. @ 120 rpm	5°	5912K1	00000
		5/16"	9/16"	2 1/4"	7/16"	270 lb. @ 120 rpm	5°	5912K2	00000
		3/8"	9/16"	2 1/4"	3/8"	330 lb. @ 120 rpm	5°	5912K3	00000
		1/2"	9/16"	2 1/4"	7/16"	500 lb. @ 120 rpm	5°	5912K4	00000
		1/2"	3/4"	3 1/4"	5/8"	490 lb. @ 120 rpm	5°	5912K5	00000
		1/2"	1"	4"	27/32"	670 lb. @ 120 rpm	5°	5912K52	00000
		5/8"	3/4"	3 1/4"	25/32"	970 lb. @ 60 rpm	5°	5912K6	00000
		5/8"	1"	4"	27/32"	1,050 lb. @ 60 rpm	5°	5912K53	00000
		3/4"	3/4"	3 1/4"	55/64"	1,300 lb. @ 60 rpm	5°	5912K7	00000
		7/8"	1"	4"	29/32"	1,400 lb. @ 60 rpm	5°	5912K8	00000


		1"	1 1/4"	5"	29/32"	1,400 lb. @ 60 rpm	5°	5912K9	00000
		1 1/4"	1 1/4"	5"	61/64"	2,350 lb. @ 30 rpm	5°	5912K11	00000
		6 mm	9.5 mm	36.5 mm	9.5 mm	175 lb. @ 120 rpm	5°	5912K64	00000
		8 mm	14.5 mm	57 mm	11.5 mm	270 lb. @ 120 rpm	5°	5912K65	00000
		10 mm	14.5 mm	57 mm	11.5 mm	340 lb. @ 120 rpm	5°	5912K66	00000
		12 mm	19 mm	82.5 mm	16 mm	500 lb. @ 120 rpm	5°	5912K67	00000
		15 mm	19 mm	82.5 mm	19.5 mm	930 lb. @ 60 rpm	5°	5912K68	00000
		16 mm	19 mm	82.5 mm	19.5 mm	990 lb. @ 60 rpm	5°	5912K69	00000
		18 mm	19 mm	82.5 mm	22.5 mm	1,250 lb. @ 60 rpm	5°	5912K71	00000
		20 mm	19 mm	82.5 mm	22.5 mm	1,400 lb. @ 60 rpm	5°	5912K72	00000


		25 mm	32 mm	127 mm	22.5 mm	1,400 lb. @ 60 rpm	5°	5912K55	00000
		30 mm	32 mm	127 mm	24 mm	2,200 lb. @ 30 rpm	5°	5912K56	00000

Oil-Embedded Mounted Sleeve Bearings with Two-Bolt Flange

Reduce upkeep with sleeve bearings that lubricate themselves. Made from porous, oil-saturated bronze, they release a thin film of lubrication upon startup to keep shafts spinning. With no moving parts, sleeve bearings withstand dusty, dirty environments better than ball or roller bearings. However, with more friction generated, they're less effective at high speeds. The sturdy housing supports the shaft and secures with a two-bolt flange, the most common type of flanged bearing.

Aluminum Housing—One-third the weight of cast iron but not as strong. Aluminum also resists corrosion.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

		Overall
	For Shaft Dia.	Lg.	Wd.	Flange Thk.	Dynamic Radial Load Cap. @ Speed	Misalignment Capability		Each
840 Bearing Bronze Bearing with Aluminum Housing



		3/16"	1 5/8"	25/64"	3/16"	140 lb. @ 120 rpm	5°	5912K75	00000


		1/4"	1 5/8"	25/64"	3/16"	185 lb. @ 120 rpm	5°	5912K12	0000
		5/16"	2 1/4"	7/16"	3/16"	270 lb. @ 120 rpm	5°	5912K13	0000
		3/8"	2 1/4"	7/16"	3/16"	320 lb. @ 120 rpm	5°	5912K14	0000
		1/2"	2 1/4"	5/8"	3/16"	490 lb. @ 120 rpm	5°	5912K15	00000
		1/2"	3 1/4"	5/8"	1/4"	620 lb. @ 120 rpm	5°	5912K16	00000
		5/8"	3 1/4"	25/32"	1/4"	970 lb. @ 60 rpm	5°	5912K17	00000
		3/4"	3 1/4"	27/32"	1/4"	1,300 lb. @ 60 rpm	5°	5912K18	00000
		7/8"	4"	29/32"	5/16"	1,400 lb. @ 60 rpm	5°	5912K19	00000
		1"	5"	3/8"	3/8"	1,400 lb. @ 60 rpm	5°	5912K32	00000
		1 1/4"	5"	61/64"	3/8"	2,300 lb. @ 30 rpm	5°	5912K33	00000


		6 mm	41.5 mm	10 mm	5 mm	185 lb. @ 120 rpm	5°	5912K77	0000
		8 mm	57 mm	11.5 mm	5 mm	280 lb. @ 120 rpm	5°	5912K78	0000
		10 mm	57 mm	11.5 mm	5 mm	350 lb. @ 120 rpm	5°	5912K79	0000
		12 mm	82.5 mm	16 mm	6.5 mm	510 lb. @ 120 rpm	5°	5912K81	00000
		15 mm	82.5 mm	19.5 mm	6.5 mm	900 lb. @ 60 rpm	5°	5912K82	00000
		16 mm	82.5 mm	19.5 mm	6.5 mm	960 lb. @ 60 rpm	5°	5912K83	00000
		18 mm	82.5 mm	22.5 mm	6.5 mm	1,250 lb. @ 60 rpm	5°	5912K84	00000
		25 mm	127 mm	22.5 mm	9.5 mm	1,400 lb. @ 60 rpm	5°	5912K86	00000

Tapped-Base Mounted Ball Bearings

Smoother than smooth—the balls roll nearly friction-free within a sturdy housing to support shafts as they turn. These bearings mount from the bottom through threaded holes. With a narrow profile, they're a good fit for cramped spots where multiple shafts are mounted close together.

Lubricate regularly to keep your bearing in tip-top shape. These bearings come packed with grease and sealed to block out dust and contaminants.

Set Screw—Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

	Bearings												Replacement Bearings
			Overall
	For Shaft Dia.	Ctr. Ht.	Lg.	Wd.	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Bearing Material	Bearing Seal Type	Misalignment Capability	Manufacturer		Each		Each
Powder-Coated Cast Iron Housing







				Set Screw

				1/2"	1 5/16"	3 1/8"	1 1/2"	2,610	7,300	Steel	Sealed	2°	Sealmaster	7366N111	0000000	———	0


				5/8"	1 5/16"	3 1/8"	1 1/2"	2,610	7,300	Steel	Sealed	2°	Sealmaster	7366N112	000000	7728T112	000000
				3/4"	1 5/16"	3 1/8"	1 1/2"	2,610	7,300	Steel	Sealed	2°	Sealmaster	7366N113	000000	7728T113	00000
				1"	1 7/16"	3"	1 1/2"	2,800	6,350	Steel	Sealed	2°	Sealmaster	7366N116	000000	7728T116	000000
				1 1/16"	1 11/16"	4"	1 1/2"	4,380	5,450	Steel	Sealed	2°	Sealmaster	7366N117	000000	———	0
				1 3/16"	1 11/16"	4"	1 1/2"	4,380	5,450	Steel	Sealed	2°	Sealmaster	7366N118	000000	7728T118	000000
				1 1/4"	1 7/8"	4 1/4"	1 7/8"	5,780	4,650	Steel	Sealed	2°	Sealmaster	7366N121	000000	7728T119	000000
				1 7/16"	1 7/8"	4 1/4"	1 7/8"	5,780	4,650	Steel	Sealed	2°	Sealmaster	7366N124	000000	7728T123	000000
				1 1/2"	1 15/16"	4 5/8"	1 7/8"	7,340	4,150	Steel	Sealed	2°	Sealmaster	7366N125	000000	7728T124	000000
				1 3/4"	2 1/8"	5"	2"	7,900	3,800	Steel	Sealed	2°	Sealmaster	7366N129	000000	7728T151	000000
				2"	2 1/4"	5 1/2"	2"	7,880	3,550	Steel	Sealed	2°	Sealmaster	7366N133	000000	———	0


				20 mm	33.3 mm	79.4 mm	38.1 mm	2,610	7,300	Steel	Sealed	2°	Sealmaster	7366N151	000000	7835T111	000000
				25 mm	36.5 mm	76.2 mm	38.1 mm	2,800	6,350	Steel	Sealed	2°	Sealmaster	7366N165	000000	7835T112	000000
				30 mm	42.9 mm	101.6 mm	38.1 mm	4,380	5,450	Steel	Sealed	2°	Sealmaster	7366N152	000000	7835T113	000000




						Clamp On

						3/4"	1 5/16"	3 1/8"	1 1/2"	2,610	10,200	Steel	Sealed	2°	Sealmaster	7366N134	000000	———	0


						1 1/8"	1 11/16"	4"	1 1/2"	4,380	7,600	Steel	Sealed	2°	Sealmaster	7366N137	000000	———	0
						1 3/16"	1 11/16"	4"	1 1/2"	4,380	7,600	Steel	Sealed	2°	Sealmaster	7366N138	000000	———	0
						1 7/16"	1 7/8"	4 1/4"	1 7/8"	5,780	6,500	Steel	Sealed	2°	Sealmaster	7366N143	000000	———	0
						1 15/16"	2 1/4"	5 1/2"	2"	7,880	5,000	Steel	Sealed	2°	Sealmaster	7366N148	000000	———	0
						2"	2 1/4"	5 1/2"	2"	7,880	5,000	Steel	Sealed	2°	Sealmaster	7366N149	000000	———	0
						30 mm	42.9 mm	101.6 mm	38.1 mm	4,380	5,450	Steel	Sealed	2°	Sealmaster	7366N159	000000	———	0

Mounted Tapered-Roller Bearings

Support heavier loads than mounted ball or needle-roller bearings, but at lower speeds. These bearings also withstand thrust loads, which are forces acting parallel to the shaft. The sturdy housing bolts down to support shafts as they turn.

Lubricate your bearings regularly to keep them in tip-top shape. These bearings come packed with grease and sealed to block out dust and contaminants.

Set Screw—Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces.

			Overall		Dynamic Load Cap., lb.
	For Shaft Dia.	Ctr. Ht.	Lg.	Wd.	Radial	Thrust	Max. Rotation Speed, rpm	Bearing Material	Bearing Seal Type		Each
Powder-Coated Cast Iron Housing







				Set Screw

				1 1/4"	1 1/2"	6"	2 3/4"	3,800	2,000	4,400	Steel	Sealed	1495N11	0000000


				1 3/8"	1 7/8"	7 3/8"	3"	6,100	2,550	3,800	Steel	Sealed	1495N12	000000
				1 1/2"	2 1/8"	7 7/8"	3 3/8"	7,850	2,550	3,300	Steel	Sealed	1495N13	000000
				1 5/8"	2 1/8"	7 7/8"	3 3/8"	7,850	2,550	3,300	Steel	Sealed	1495N14	000000
				1 3/4"	2 1/4"	8 7/8"	3 1/2"	10,300	2,550	3,000	Steel	Sealed	1495N15	000000
				2"	2 1/4"	8 7/8"	3 1/2"	10,300	2,550	3,000	Steel	Sealed	1495N17	000000
				2 1/4"	2 3/4"	10 1/2"	4"	11,600	3,450	2,400	Steel	Sealed	1495N18	000000
				2 1/2"	2 3/4"	10 1/2"	4"	11,600	3,450	2,400	Steel	Sealed	1495N19	000000
				2 3/4"	3 1/8"	12"	4 1/2"	12,300	5,150	2,000	Steel	Sealed	1495N21	00000000
				3"	3 1/8"	12"	4 1/2"	12,300	5,150	2,000	Steel	Sealed	1495N22	00000000
				3 1/2"	3 3/4"	14"	5"	19,600	5,150	1,600	Steel	Sealed	1495N23	00000000


				4"	4 1/4"	15 1/4"	6 1/4"	26,900	6,900	1,500	Steel	Sealed	1495N24	00000000
				35 mm	1 7/8"	7 3/8"	3"	6,100	2,550	3,800	Steel	Sealed	1495N25	000000
				40 mm	2 1/8"	7 7/8"	3 3/8"	7,850	2,550	3,300	Steel	Sealed	1495N26	000000
				50 mm	2 1/4"	8 7/8"	3 1/2"	10,300	2,550	3,000	Steel	Sealed	1495N28	000000

Food-and-Beverage Mounted Ball Bearings with Two-Bolt Flange

With NSF-registered H1 grease, these bearings are safe for use on food and beverage lines. Install them into conveyors, packaging systems, and other food processing applications where contact with ingredients is rare but possible. The balls roll nearly friction-free within a sturdy housing to support shafts as they turn. The housing mounts in place with a two-bolt flange, the most common type of flanged bearing.

Lubricate your bearings regularly to keep them in tip-top shape. These bearings come packed with grease and sealed or shielded to block out dust and contaminants.

Plastic Housing—Lightweight and naturally rust-resistant, with a smooth surface that's easy to wipe clean.

400 Series Stainless Steel Housing—Prevent rust from exposure to moisture and mild chemicals, including ammonia-based cleaning solutions.

316 Stainless Steel Housing—The most corrosion-resistant metal we offer, these housings hold up to harsh chemicals and salt water.

Set Screw—Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

Closed Caps—Mount on the end of the shaft to block out debris and prevent accidental contact with rotating parts.

Open Caps—Install anywhere along the shaft to block out debris and prevent accidental contact with rotating parts.

	Bearings														Closed Caps		Open Caps
		Overall
	For Shaft Dia.	Lg.	Wd.	Flange Thk.	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Bearing Material	Bearing Seal Type	Misalignment Capability	Enclosure Rating	Includes	Manufacturer		Each		Each		Each
Plastic Housing







				Set Screw

				3/4"	4 7/16"	1 5/16"	9/16"	Not Rated	500	303 Stainless Steel	Sealed	3°	—	Closed Cap	McMaster-Carr Approved	6670K21	0000000	———	0	———	0


				1"	5 3/16"	1 1/2"	9/16"	Not Rated	400	303 Stainless Steel	Sealed	3°	—	Closed Cap	McMaster-Carr Approved	6670K22	000000	———	0	———	0
				1 3/16"	5 13/16"	1 9/16"	9/16"	Not Rated	350	303 Stainless Steel	Sealed	3°	—	Closed Cap	McMaster-Carr Approved	6670K23	000000	———	0	———	0
				1 1/4"	6 1/2"	1 13/16"	5/8"	Not Rated	300	303 Stainless Steel	Sealed	3°	—	Closed Cap	McMaster-Carr Approved	6670K24	000000	———	0	———	0
				1 7/16"	6 1/2"	1 13/16"	5/8"	Not Rated	300	303 Stainless Steel	Sealed	3°	—	Closed Cap	McMaster-Carr Approved	6670K25	000000	———	0	———	0


				400 Series Stainless Steel Housing







								Set Screw

								3/4"	4 1/2"	1 5/16"	7/16"	2,400	1,100	440 Stainless Steel	Shielded	5°	—	—	McMaster-Carr Approved	3756T8	000000	6736K31	00000	———	0


								1"	5 1/8"	1 7/16"	17/32"	2,650	900	440 Stainless Steel	Shielded	5°	—	—	McMaster-Carr Approved	3756T9	000000	6736K32	0000	———	0
								1 1/4"	5 7/8"	1 5/8"	17/32"	3,650	750	440 Stainless Steel	Shielded	5°	—	—	McMaster-Carr Approved	3756T21	000000	6736K39	0000	———	0
								1 1/2"	6 7/8"	2 1/64"	9/16"	5,550	600	440 Stainless Steel	Shielded	5°	—	—	McMaster-Carr Approved	3756T22	000000	6736K36	0000	———	0


								316 Stainless Steel Housing







												Set Screw

												3/4"	4 13/32"	2 19/64"	31/32"	2,600	3,000	Steel	Sealed	2°	IP69K	—	Sealmaster	7363N47	000000	5135N23	00000	5135N11	000000


												1"	4 7/8"	2 7/16"	1 5/64"	2,800	2,000	Steel	Sealed	2°	IP69K	—	Sealmaster	7363N32	000000	5135N24	00000	5135N12	00000
												1 1/4"	5 9/16"	2 9/16"	1 7/32"	4,350	2,000	Steel	Sealed	2°	IP69K	—	Sealmaster	7363N24	000000	5135N25	00000	5135N14	00000
												1 3/8"	6 1/8"	2 3/4"	1 11/32"	5,750	2,000	Steel	Sealed	2°	IP69K	—	Sealmaster	7363N16	000000	5135N26	00000	5135N16	00000
												1 7/16"	6 1/8"	2 3/4"	1 11/32"	5,750	2,000	Steel	Sealed	2°	IP69K	—	Sealmaster	7363N14	000000	5135N26	00000	5135N16	00000
												1 1/2"	6 3/4"	3 1/64"	1 1/2"	7,300	1,750	Steel	Sealed	2°	IP69K	—	Sealmaster	7363N41	000000	5135N27	00000	5135N17	00000
												1 11/16"	7 1/16"	3 3/64"	1 9/16"	7,900	1,500	Steel	Sealed	2°	IP69K	—	Sealmaster	7363N26	000000	5135N28	00000	5135N18	00000
												20 mm	112 mm	58 mm	25 mm	2,600	3,000	Steel	Sealed	2°	IP69K	—	Sealmaster	7363N13	000000	5135N23	00000	5135N11	00000
												25 mm	124 mm	62 mm	27 mm	2,800	2,000	Steel	Sealed	2°	IP69K	—	Sealmaster	7363N21	000000	5135N24	00000	5135N12	00000
												30 mm	142 mm	65 mm	31 mm	4,350	2,000	Steel	Sealed	2°	IP69K	—	Sealmaster	7363N28	000000	5135N25	00000	5135N13	00000




														Clamp On

3/4"														4 13/32"	2 17/64"	31/32"	2,600	3,000	Steel	Sealed	2°	IP69K	—	Sealmaster	7363N17	000000	5135N23	00000	5135N11	00000


1"	4 7/8"													2 7/16"	1 5/64"	2,800	2,000	Steel	Sealed	2°	IP69K	—	Sealmaster	7363N27	000000	5135N24	00000	5135N12	00000
1 3/16"	5 9/16"													2 37/64"	1 7/32"	4,350	2,000	Steel	Sealed	2°	IP69K	—	Sealmaster	7363N38	000000	5135N25	00000	5135N13	00000
1 1/4"	5 9/16"	2 37/64"												1 7/32"	4,350	2,000	Steel	Sealed	2°	IP69K	—	Sealmaster	7363N18	000000	5135N25	00000	5135N14	00000
Food-and-Beverage Ball Bearing with Two-Bolt Flange, Mounted, 316 Stainless Steel Housing, Clamp on, for 1-1/4" Shaft Product Detail QuantityEachIn stock Select a compatible file type: Parasolid Compatible Products for This Mounted Bearing

Mounted Needle-Roller Bearings

Lubricate your bearings regularly to keep them in tip-top shape. These bearings are not sealed, which may attract dust and debris in the grease.

Aluminum Housing—One-third the weight of cast iron but not as strong. Aluminum also resists corrosion.

Press Fit—Mount directly onto a hardened and ground shaft.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

			Overall
	For Shaft Dia.	Ctr. Ht.	Lg.	Wd.	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Bearing Material	Bearing Seal Type	Misalignment Capability		Each
Aluminum Housing







				Press Fit

				1/4"	9/16"	2 1/4"	7/16"	570	21,000	Steel	Open	5°	2031N11	000000


				5/16"	9/16"	2 1/4"	5/8"	650	17,400	Steel	Open	5°	2031N12	00000
				3/8"	9/16"	2 1/4"	5/8"	650	15,000	Steel	Open	5°	2031N13	00000
				1/2"	3/4"	3 1/4"	25/32"	1,000	11,400	Steel	Open	5°	2031N14	00000
				5/8"	3/4"	3 1/4"	55/64"	1,800	9,600	Steel	Open	5°	2031N15	00000
				3/4"	1 1/4"	5"	29/32"	2,200	7,800	Steel	Open	5°	2031N16	00000
				6 mm	14.5 mm	57 mm	11.2 mm	450	21,900	Steel	Open	5°	2031N17	00000
				8 mm	14.5 mm	57 mm	16.3 mm	610	17,700	Steel	Open	5°	2031N18	00000
				10 mm	14.5 mm	57 mm	16.3 mm	980	14,580	Steel	Open	5°	2031N19	00000
				12 mm	19 mm	82.5 mm	20 mm	1,100	12,420	Steel	Open	5°	2031N21	00000

Food-and-Beverage Mounted Ball Bearings

With NSF-registered H1 grease, these bearings are safe for use on food and beverage lines. Install them into conveyors, packaging systems, and other food processing applications where contact with ingredients is rare but possible. The balls roll nearly friction free within a sturdy housing to support smooth rotation.