7717N96 | MXL Series Lightweight Timing Belt Pulley

Filter by

System of Measurement

Inch

Metric

For Maximum Belt Width

Number of Teeth

Shaft Diameter

Belt Trade Size

Pitch

Bore Type

Material

Tooth Profile

Hub Type

Pitch Diameter

Shaft Type

Width

Hub Diameter

Number of Flanges

Inside Width

Overall Width

Shaft Mount Type

RoHS

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

REACH

Compliant

Not Compliant

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

Outside Width

1,261 Products

Tooth Profile

Trapezoidal

Keep drive systems in sync with the original tooth profile

905 products

Curved (HTD)

Transmit about twice as much torque as trapezoidal teeth

233 products

Tooth Profile

Modified Curved (GT)

Transmit about three times the torque of trapezoidal teeth with more precision

224 products

Tire Track

25% less operating noise than trapezoidal teeth

88 products

Timing Belt Pulleys


Finished Bore	Plain Bore

Bushing Bore

Keep your drive system in sync. Trapezoidal teeth mesh with matching belts to synchronize motion. With the original tooth profile, these pulleys handle enough torque for most applications. If you need high torque or precise starts and stops, consider curved tooth profiles, such as GT and HTD pulleys.

Steel and Iron—Strong but best for dry environments since moisture will cause them to rust.

Corrosion-Resistant Aluminum—Won't rust in wet environments and one-third the weight of steel and iron. However, aluminum pulleys are not as strong as iron and steel.

Finished Bore—Mount these pulleys onto the shaft and secure with a set screw—no machining required.

Plain Bore—Do it your way—machine the bore to your exact shaft size or add a set screw or keyway.

Bushing Bore—Quickly swap or service parts in tight spaces—no press-fitting or special tools required. Mount a bushing (sold separately) on your shaft and slide the pulley over it. As you tighten the included set screws, the bushing grips the shaft and draws it into the pulley, creating a final hold that is more secure than with set screws alone.

Flush Hub—Ideal in tight spots where a raised hub would get in the way.

						For Bushing		Keyway
	For Max. Belt Wd.	Pitch	No. of Teeth	Bore Type	For Shaft Dia.	Type	Trade No.	Wd.	Dp.	Pitch Dia.	No. of Flanges	Hub Type		Each
For MXL Trade Size







				Corrosion-Resistant Aluminum

				1/8"	0.080"	10	Finished	1/8"	—	—	—	—	0.255"	1	Standard	1375K11	000000


				1/8"	0.080"	11	Finished	1/8"	—	—	—	—	0.28"	1	Standard	1375K12	00000
				1/8"	0.080"	12	Finished	1/8"	—	—	—	—	0.306"	1	Standard	1375K13	00000
				1/8"	0.080"	14	Finished	1/8"	—	—	—	—	0.357"	1	Standard	1375K14	00000
				1/8"	0.080"	15	Finished	3/16"	—	—	—	—	0.382"	1	Standard	1375K15	00000
				1/8"	0.080"	16	Finished	3/16"	—	—	—	—	0.407"	1	Standard	1375K16	00000
				1/8"	0.080"	18	Finished	3/16"	—	—	—	—	0.458"	2	Standard	1375K17	00000
				1/8"	0.080"	20	Finished	1/4"	—	—	—	—	0.509"	1	Standard	1375K21	00000
				1/8"	0.080"	21	Finished	1/4"	—	—	—	—	0.535"	1	Standard	1375K23	00000
				1/8"	0.080"	22	Finished	1/4"	—	—	—	—	0.56"	1	Standard	1375K25	00000
				1/8"	0.080"	24	Finished	1/4"	—	—	—	—	0.611"	2	Standard	1375K26	00000


				1/8"	0.080"	28	Finished	1/4"	—	—	—	—	0.713"	2	Standard	1375K27	00000
				1/8"	0.080"	30	Finished	1/4"	—	—	—	—	0.764"	2	Standard	1375K28	00000
				1/8"	0.080"	36	Finished	1/4"	—	—	—	—	0.917"	2	Standard	1375K49	00000
				1/8"	0.080"	40	Finished	1/4"	—	—	—	—	1.019"	2	Standard	1375K51	00000
				1/8"	0.080"	42	Finished	1/4"	—	—	—	—	1.07"	2	Standard	1375K52	00000
				1/8"	0.080"	60	Finished	1/4"	—	—	—	—	1.53"	2	Standard	1375K53	00000
				1/4"	0.080"	10	Finished	1/8"	—	—	—	—	0.255"	1	Standard	1375K29	00000
				1/4"	0.080"	11	Finished	1/8"	—	—	—	—	0.28"	1	Standard	1375K31	00000
				1/4"	0.080"	12	Finished	1/8"	—	—	—	—	0.306"	1	Standard	1375K32	00000
				1/4"	0.080"	14	Finished	1/8"	—	—	—	—	0.357"	1	Standard	1375K33	00000


				1/4"	0.080"	15	Finished	3/16"	—	—	—	—	0.382"	1	Standard	1375K34	00000
				1/4"	0.080"	16	Finished	3/16"	—	—	—	—	0.407"	1	Standard	1375K35	00000
				1/4"	0.080"	18	Finished	3/16"	—	—	—	—	0.458"	2	Standard	1375K36	00000
				1/4"	0.080"	20	Finished	1/4"	—	—	—	—	0.509"	1	Standard	1375K39	00000
				1/4"	0.080"	21	Finished	1/4"	—	—	—	—	0.535"	1	Standard	1375K42	00000
				1/4"	0.080"	22	Finished	1/4"	—	—	—	—	0.56"	1	Standard	1375K44	00000
				1/4"	0.080"	24	Finished	1/4"	—	—	—	—	0.611"	2	Standard	1375K45	00000
				1/4"	0.080"	28	Finished	1/4"	—	—	—	—	0.713"	2	Standard	1375K47	00000
				1/4"	0.080"	30	Finished	1/4"	—	—	—	—	0.764"	2	Standard	1375K48	00000
				1/4"	0.080"	36	Finished	1/4"	—	—	—	—	0.917"	2	Standard	1375K54	00000


				1/4"	0.080"	40	Finished	1/4"	—	—	—	—	1.019"	2	Standard	1375K55	00000
				1/4"	0.080"	42	Finished	1/4"	—	—	—	—	1.07"	2	Standard	1375K56	00000
				1/4"	0.080"	60	Finished	1/4"	—	—	—	—	1.53"	2	Standard	1375K57	00000
				3 mm	0.080"	10	Finished	3 mm	—	—	—	—	6.5 mm	1	Standard	1375K171	00000
				3 mm	0.080"	11	Finished	3 mm	—	—	—	—	7.1 mm	1	Standard	1375K172	00000
				3 mm	0.080"	12	Finished	3 mm	—	—	—	—	7.8 mm	1	Standard	1375K173	00000
				3 mm	0.080"	14	Finished	3 mm	—	—	—	—	9.1 mm	1	Standard	1375K174	00000
				3 mm	0.080"	15	Finished	4 mm	—	—	—	—	9.7 mm	1	Standard	1375K175	00000
				3 mm	0.080"	16	Finished	4 mm	—	—	—	—	10.3 mm	1	Standard	1375K176	00000
				3 mm	0.080"	18	Finished	4 mm	—	—	—	—	11.6 mm	2	Standard	1375K177	00000


				3 mm	0.080"	18	Finished	6 mm	—	—	—	—	11.6 mm	1	Standard	1375K178	00000
				3 mm	0.080"	20	Finished	4 mm	—	—	—	—	12.9 mm	2	Standard	1375K179	00000
				3 mm	0.080"	20	Finished	6 mm	—	—	—	—	12.9 mm	1	Standard	1375K181	00000
				3 mm	0.080"	22	Finished	4 mm	—	—	—	—	14.2 mm	2	Standard	1375K184	00000
3 mm				0.080"	22	Finished	6 mm	—	—	—	—	14.2 mm	1	Standard	1375K185	00000
3 mm	0.080"			24	Finished	6 mm	—	—	—	—	15.5 mm	2	Standard	1375K186	00000
3 mm	0.080"			25	Finished	6 mm	—	—	—	—	16.2 mm	2	Standard	1375K187	00000
3 mm	0.080"			28	Finished	6 mm	—	—	—	—	18.1 mm	2	Standard	1375K188	00000
3 mm	0.080"			30	Finished	6 mm	—	—	—	—	19.4 mm	2	Standard	1375K189	00000
3 mm	0.080"	32		Finished	6 mm	—	—	—	—	20.7 mm	2	Standard	1375K191	00000
3 mm	0.080"	36	Finished	6 mm	—	—	—	—	23.3 mm	2	Standard	1375K192	00000
3 mm	0.080"	40	Finished	6 mm	—	—	—	—	25.9 mm	2	Standard	1375K193	00000
3 mm	0.080"	42	Finished	6 mm	—	—	—	—	27.2 mm	2	Standard	1375K194	00000
3 mm	0.080"	44	Finished	6 mm	—	—	—	—	28.5 mm	2	Standard	1375K195	00000
3 mm	0.080"	60	Finished	6 mm	—	—	—	—	38.8 mm	2	Standard	1375K197	00000
6 mm	0.080"	10	Finished	3 mm	—	—	—	—	6.5 mm	1	Standard	1375K101	00000
6 mm	0.080"	12	Finished	3 mm	—	—	—	—	7.8 mm	1	Standard	1375K105	00000
6 mm	0.080"	14	Finished	3 mm	—	—	—	—	9.1 mm	1	Standard	1375K107	00000
6 mm	0.080"	15	Finished	4 mm	—	—	—	—	9.7 mm	1	Standard	1375K109	00000
6 mm	0.080"	16	Finished	4 mm	—	—	—	—	10.3 mm	1	Standard	1375K112	00000
6 mm	0.080"	18	Finished	4 mm	—	—	—	—	11.6 mm	2	Standard	1375K114	00000
6 mm	0.080"	18	Finished	6 mm	—	—	—	—	11.6 mm	1	Standard	1375K115	00000
6 mm	0.080"	20	Finished	4 mm	—	—	—	—	12.9 mm	2	Standard	1375K118	00000
6 mm	0.080"	20	Finished	6 mm	—	—	—	—	12.9 mm	1	Standard	1375K119	00000
6 mm	0.080"	22	Finished	4 mm	—	—	—	—	14.2 mm	2	Standard	1375K127	00000
6 mm	0.080"	22	Finished	6 mm	—	—	—	—	14.2 mm	1	Standard	1375K128	00000
6 mm	0.080"	24	Finished	6 mm	—	—	—	—	15.5 mm	2	Standard	1375K132	00000
6 mm	0.080"	28	Finished	6 mm	—	—	—	—	18.1 mm	2	Standard	1375K136	00000
6 mm	0.080"	30	Finished	6 mm	—	—	—	—	19.4 mm	2	Standard	1375K138	00000
6 mm	0.080"	32	Finished	6 mm	—	—	—	—	20.7 mm	2	Standard	1375K141	00000
6 mm	0.080"	36	Finished	6 mm	—	—	—	—	23.3 mm	2	Standard	1375K143	00000
6 mm	0.080"	40	Finished	6 mm	—	—	—	—	25.9 mm	2	Standard	1375K145	00000
6 mm	0.080"	42	Finished	6 mm	—	—	—	—	27.2 mm	2	Standard	1375K147	00000
6 mm	0.080"	48	Finished	6 mm	—	—	—	—	31 mm	2	Standard	1375K153	00000
6 mm	0.080"	60	Finished	6 mm	—	—	—	—	38.8 mm	—	Standard	1375K157	00000
6 mm	0.080"	60	Finished	6 mm	—	—	—	—	38.8 mm	2	Standard	1375K155	00000
6 mm	0.080"	80	Finished	8 mm	—	—	—	—	51.7 mm	—	Standard	1375K162	00000
6 mm	0.080"	90	Finished	8 mm	—	—	—	—	58.2 mm	—	Standard	1375K164	00000
6 mm	0.080"	100	Finished	8 mm	—	—	—	—	64.7 mm	—	Standard	1375K166	00000
6 mm	0.080"	120	Finished	10 mm	—	—	—	—	77.6 mm	—	Standard	1375K168	00000
9 mm	0.080"	10	Finished	3 mm	—	—	—	—	6.5 mm	1	Standard	1375K102	00000
9 mm	0.080"	14	Finished	3 mm	—	—	—	—	9.1 mm	1	Standard	1375K108	00000
9 mm	0.080"	15	Finished	4 mm	—	—	—	—	9.7 mm	1	Standard	1375K111	00000
9 mm	0.080"	16	Finished	4 mm	—	—	—	—	10.3 mm	1	Standard	1375K113	00000
9 mm	0.080"	18	Finished	6 mm	—	—	—	—	11.6 mm	1	Standard	1375K117	00000
9 mm	0.080"	20	Finished	6 mm	—	—	—	—	12.9 mm	1	Standard	1375K122	00000
9 mm	0.080"	21	Finished	6 mm	—	—	—	—	13.6 mm	1	Standard	1375K126	00000
9 mm	0.080"	22	Finished	6 mm	—	—	—	—	14.2 mm	1	Standard	1375K131	00000
9 mm	0.080"	30	Finished	6 mm	—	—	—	—	19.4 mm	2	Standard	1375K139	00000
9 mm	0.080"	32	Finished	6 mm	—	—	—	—	20.7 mm	2	Standard	1375K142	00000
9 mm	0.080"	48	Finished	6 mm	—	—	—	—	31 mm	2	Standard	1375K154	00000
9 mm	0.080"	60	Finished	6 mm	—	—	—	—	38.8 mm	—	Standard	1375K158	00000
9 mm	0.080"	60	Finished	6 mm	—	—	—	—	38.8 mm	2	Standard	1375K156	00000
9 mm	0.080"	72	Finished	6 mm	—	—	—	—	46.6 mm	—	Standard	1375K161	00000
9 mm	0.080"	80	Finished	8 mm	—	—	—	—	51.7 mm	—	Standard	1375K163	00000
9 mm	0.080"	90	Finished	8 mm	—	—	—	—	58.2 mm	—	Standard	1375K165	00000
9 mm	0.080"	100	Finished	8 mm	—	—	—	—	64.7 mm	—	Standard	1375K167	00000
9 mm	0.080"	120	Finished	10 mm	—	—	—	—	77.6 mm	—	Standard	1375K169	00000

For XL Trade Size







				Steel

				3/8"	0.200"	10	Finished	3/16"	—	—	—	—	0.637"	2	Standard	6495K711	00000


				3/8"	0.200"	10	Finished	1/4"	—	—	—	—	0.637"	2	Standard	6495K744	00000
				3/8"	0.200"	11	Finished	3/16"	—	—	—	—	0.7"	2	Standard	6495K712	00000
				3/8"	0.200"	12	Finished	3/16"	—	—	—	—	0.764"	2	Standard	6495K713	00000
				3/8"	0.200"	12	Finished	1/4"	—	—	—	—	0.764"	2	Standard	6495K745	00000
				3/8"	0.200"	12	Finished	5/16"	—	—	—	—	0.764"	2	Standard	6495K746	00000
				3/8"	0.200"	14	Finished	1/4"	—	—	—	—	0.891"	2	Standard	6495K714	00000
				3/8"	0.200"	15	Finished	1/4"	—	—	—	—	0.955"	2	Standard	6495K715	00000
				3/8"	0.200"	15	Finished	3/8"	—	—	—	—	0.955"	2	Standard	6495K747	00000
				3/8"	0.200"	16	Finished	1/4"	—	—	—	—	1.019"	2	Standard	6495K716	00000
				3/8"	0.200"	16	Finished	3/8"	—	—	—	—	1.019"	2	Standard	6495K748	00000


				3/8"	0.200"	18	Finished	1/4"	—	—	—	—	1.146"	2	Standard	6495K717	00000
				3/8"	0.200"	18	Finished	3/8"	—	—	—	—	1.146"	2	Standard	6495K751	00000
				3/8"	0.200"	18	Finished	1/2"	—	—	—	—	1.146"	2	Standard	6495K749	00000
				3/8"	0.200"	20	Finished	1/4"	—	—	—	—	1.273"	2	Standard	6495K718	00000
				3/8"	0.200"	20	Finished	1/2"	—	—	—	—	1.273"	2	Standard	6495K752	00000
				3/8"	0.200"	21	Finished	1/4"	—	—	—	—	1.337"	2	Standard	6495K719	00000
				3/8"	0.200"	22	Finished	1/4"	—	—	—	—	1.401"	2	Standard	6495K721	00000
				3/8"	0.200"	22	Finished	3/8"	—	—	—	—	1.401"	2	Standard	6495K753	00000
				3/8"	0.200"	24	Finished	1/4"	—	—	—	—	1.528"	2	Standard	6495K722	00000
				3/8"	0.200"	28	Finished	1/4"	—	—	—	—	1.783"	2	Standard	6495K723	00000


				3/8"	0.200"	30	Finished	5/16"	—	—	—	—	1.91"	2	Standard	6495K724	00000
				3/8"	0.200"	32	Finished	5/16"	—	—	—	—	2.037"	—	Standard	6495K725	00000
				3/8"	0.200"	36	Finished	5/16"	—	—	—	—	2.292"	—	Standard	6495K726	00000
				3/8"	0.200"	40	Finished	5/16"	—	—	—	—	2.546"	—	Standard	6495K727	00000
				3/8"	0.200"	42	Finished	5/16"	—	—	—	—	2.674"	—	Standard	6495K728	00000
				3/8"	0.200"	44	Finished	5/16"	—	—	—	—	2.801"	—	Standard	6495K729	00000
				3/8"	0.200"	48	Finished	5/16"	—	—	—	—	3.056"	—	Standard	6495K731	00000
				3/8"	0.200"	60	Finished	3/8"	—	—	—	—	3.82"	—	Standard	6495K732	00000
				3/8"	0.200"	72	Finished	3/8"	—	—	—	—	4.584"	—	Standard	6495K733	00000




						Corrosion-Resistant Aluminum

						1/4"	0.200"	10	Finished	3/16"	—	—	—	—	0.637"	2	Standard	1277N11	00000


						1/4"	0.200"	12	Finished	3/16"	—	—	—	—	0.764"	2	Standard	1277N13	00000
						1/4"	0.200"	13	Finished	1/4"	—	—	—	—	0.828"	2	Standard	1277N14	00000
						1/4"	0.200"	14	Finished	1/4"	—	—	—	—	0.891"	2	Standard	1277N15	00000
						1/4"	0.200"	15	Finished	1/4"	—	—	—	—	0.955"	2	Standard	1277N16	00000
						1/4"	0.200"	16	Finished	1/4"	—	—	—	—	1.019"	2	Standard	1277N17	00000
						1/4"	0.200"	18	Finished	1/4"	—	—	—	—	1.146"	2	Standard	1277N18	00000
						1/4"	0.200"	20	Finished	1/4"	—	—	—	—	1.273"	2	Standard	1277N19	00000
						1/4"	0.200"	21	Finished	1/4"	—	—	—	—	1.337"	2	Standard	1277N21	00000
						1/4"	0.200"	22	Finished	5/16"	—	—	—	—	1.401"	2	Standard	1277N22	00000
						1/4"	0.200"	24	Finished	5/16"	—	—	—	—	1.528"	2	Standard	1277N23	00000


1/4"	0.200"					26	Finished	5/16"	—	—	—	—	1.655"	2	Standard	1277N24	00000
1/4"	0.200"					28	Finished	5/16"	—	—	—	—	1.783"	2	Standard	1277N25	00000
1/4"	0.200"					30	Finished	5/8"	—	—	—	—	1.91"	2	Standard	1277N26	00000
3/8"	0.200"	10				Finished	3/16"	—	—	—	—	0.637"	2	Flush	1277N735	00000
3/8"	0.200"	10	Finished			3/16"	—	—	—	—	0.637"	2	Standard	1277N41	00000
3/8"	0.200"	10	Finished			1/4"	—	—	—	—	0.637"	2	Flush	1277N736	00000
3/8"	0.200"	10	Finished			6 mm	—	—	—	—	0.64"	2	Flush	1277N775	00000
3/8"	0.200"	10	Finished			6 mm	—	—	—	—	0.64"	2	Standard	1277N711	00000
3/8"	0.200"	11	Finished			3/16"	—	—	—	—	0.7"	2	Standard	1277N42	00000
3/8"	0.200"	11	Finished			1/4"	—	—	—	—	0.7"	2	Flush	1277N737	00000


3/8"	0.200"	11	Finished			6 mm	—	—	—	—	0.7"	2	Flush	1277N776	00000
3/8"	0.200"	11	Finished			6 mm	—	—	—	—	0.7"	2	Standard	1277N712	00000
3/8"	0.200"	12	Finished			3/16"	—	—	—	—	0.764"	2	Flush	1277N738	00000
3/8"	0.200"	12	Finished			3/16"	—	—	—	—	0.764"	2	Standard	1277N43	00000
3/8"	0.200"	12	Finished			1/4"	—	—	—	—	0.764"	2	Flush	1277N739	00000
3/8"	0.200"	12	Finished			6 mm	—	—	—	—	0.76"	2	Flush	1277N777	00000
3/8"	0.200"	12	Finished			6 mm	—	—	—	—	0.76"	2	Standard	1277N713	00000
3/8"	0.200"	14	Finished			1/4"	—	—	—	—	0.891"	2	Flush	1277N741	00000
3/8"	0.200"	14	Finished			1/4"	—	—	—	—	0.891"	2	Standard	1277N44	00000
3/8"	0.200"	14	Finished			5/16"	—	—	—	—	0.891"	2	Flush	1277N742	00000


3/8"	0.200"	14	Finished			8 mm	—	—	—	—	0.89"	2	Flush	1277N778	00000
3/8"	0.200"	14	Finished			8 mm	—	—	—	—	0.89"	2	Standard	1277N714	00000
3/8"	0.200"	15	Finished			1/4"	—	—	—	—	0.955"	2	Flush	1277N27	00000
3/8"	0.200"	15	Finished			1/4"	—	—	—	—	0.955"	2	Standard	1277N45	00000
3/8"	0.200"	15	Finished			5/16"	—	—	—	—	0.955"	2	Flush	1277N744	00000
3/8"	0.200"	15	Finished			8 mm	—	—	—	—	0.96"	2	Flush	1277N779	00000
3/8"	0.200"	15	Finished			8 mm	—	—	—	—	0.96"	2	Standard	1277N715	00000
3/8"	0.200"	16	Finished			1/4"	—	—	—	—	1.019"	2	Flush	1277N745	00000
3/8"	0.200"	16	Finished			1/4"	—	—	—	—	1.019"	2	Standard	1277N46	00000
3/8"	0.200"	16	Finished			5/16"	—	—	—	—	1.019"	2	Flush	1277N746	00000


3/8"	0.200"	16	Finished			3/8"	—	—	—	—	1.019"	2	Flush	1277N747	00000
3/8"	0.200"	16	Finished			8 mm	—	—	—	—	1.02"	2	Flush	1277N781	00000
3/8"	0.200"	16	Finished			8 mm	—	—	—	—	1.02"	2	Standard	1277N716	00000
3/8"	0.200"	18	Finished			1/4"	—	—	—	—	1.146"	2	Flush	1277N748	00000
3/8"	0.200"	18	Finished			1/4"	—	—	—	—	1.146"	2	Standard	1277N47	00000
3/8"	0.200"	18	Finished			5/16"	—	—	—	—	1.146"	2	Flush	1277N749	00000
3/8"	0.200"	18	Finished			3/8"	—	—	—	—	1.146"	2	Flush	1277N751	00000
3/8"	0.200"	18	Finished			1/2"	—	—	—	—	1.146"	2	Flush	1277N752	00000
3/8"	0.200"	18	Finished			8 mm	—	—	—	—	1.15"	2	Flush	1277N782	00000
3/8"	0.200"	18	Finished	8 mm		—	—	—	—	1.15"	2	Standard	1277N717	00000
3/8"	0.200"	20	Finished	1/4"	—	—	—	—	1.273"	2	Flush	1277N753	00000
3/8"	0.200"	20	Finished	1/4"	—	—	—	—	1.273"	2	Standard	1277N48	00000
3/8"	0.200"	20	Finished	5/16"	—	—	—	—	1.273"	2	Flush	1277N754	00000
3/8"	0.200"	20	Finished	3/8"	—	—	—	—	1.273"	2	Flush	1277N755	00000
3/8"	0.200"	20	Finished	1/2"	—	—	—	—	1.273"	2	Flush	1277N756	00000
3/8"	0.200"	20	Finished	8 mm	—	—	—	—	1.27"	2	Flush	1277N783	00000
3/8"	0.200"	20	Finished	8 mm	—	—	—	—	1.27"	2	Standard	1277N718	00000
3/8"	0.200"	21	Finished	1/4"	—	—	—	—	1.337"	2	Flush	1277N757	00000
3/8"	0.200"	21	Finished	1/4"	—	—	—	—	1.337"	2	Standard	1277N49	00000
3/8"	0.200"	22	Finished	1/4"	—	—	—	—	1.401"	2	Flush	1277N758	00000
3/8"	0.200"	22	Finished	1/4"	—	—	—	—	1.401"	2	Standard	1277N5	00000
3/8"	0.200"	22	Finished	5/16"	—	—	—	—	1.401"	2	Flush	1277N759	00000
3/8"	0.200"	22	Finished	3/8"	—	—	—	—	1.401"	2	Flush	1277N761	00000
3/8"	0.200"	22	Finished	8 mm	—	—	—	—	1.4"	2	Flush	1277N784	00000
3/8"	0.200"	22	Finished	8 mm	—	—	—	—	1.4"	2	Standard	1277N719	00000
3/8"	0.200"	24	Finished	1/4"	—	—	—	—	1.528"	2	Flush	1277N762	00000
3/8"	0.200"	24	Finished	1/4"	—	—	—	—	1.528"	2	Standard	1277N51	00000
3/8"	0.200"	24	Finished	5/16"	—	—	—	—	1.528"	2	Flush	1277N763	00000
3/8"	0.200"	24	Finished	3/8"	—	—	—	—	1.528"	2	Flush	1277N764	00000
3/8"	0.200"	24	Finished	3/8"	—	—	—	—	1.528"	2	Standard	1277N28	00000
3/8"	0.200"	24	Finished	1/2"	—	—	—	—	1.528"	2	Flush	1277N765	00000
3/8"	0.200"	24	Finished	8 mm	—	—	—	—	1.53"	2	Flush	1277N785	00000
3/8"	0.200"	24	Finished	8 mm	—	—	—	—	1.53"	2	Standard	1277N721	00000
3/8"	0.200"	26	Finished	1/4"	—	—	—	—	1.665"	2	Standard	1277N52	00000
3/8"	0.200"	28	Finished	1/4"	—	—	—	—	1.783"	2	Flush	1277N766	00000
3/8"	0.200"	28	Finished	1/4"	—	—	—	—	1.783"	2	Standard	1277N53	00000
3/8"	0.200"	28	Finished	8 mm	—	—	—	—	1.78"	2	Flush	1277N786	00000
3/8"	0.200"	28	Finished	8 mm	—	—	—	—	1.79"	2	Standard	1277N722	00000
3/8"	0.200"	30	Finished	1/4"	—	—	—	—	1.91"	2	Flush	1277N767	00000
3/8"	0.200"	30	Finished	1/4"	—	—	—	—	1.91"	2	Standard	1277N54	00000
3/8"	0.200"	30	Finished	5/16"	—	—	—	—	1.91"	2	Flush	1277N768	00000
3/8"	0.200"	30	Finished	3/8"	—	—	—	—	1.91"	2	Flush	1277N769	00000
3/8"	0.200"	30	Finished	1/2"	—	—	—	—	1.91"	2	Flush	1277N771	00000
3/8"	0.200"	30	Finished	8 mm	—	—	—	—	1.91"	2	Flush	1277N787	00000
3/8"	0.200"	30	Finished	10 mm	—	—	—	—	1.91"	2	Standard	1277N723	00000
3/8"	0.200"	32	Finished	1/4"	—	—	—	—	2.037"	2	Flush	1277N772	00000
3/8"	0.200"	32	Finished	5/16"	—	—	—	—	2.037"	—	Standard	1277N55	00000
3/8"	0.200"	32	Finished	5/16"	—	—	—	—	2.037"	2	Flush	1277N773	00000
3/8"	0.200"	32	Finished	3/8"	—	—	—	—	2.037"	2	Flush	1277N774	00000
3/8"	0.200"	32	Finished	8 mm	—	—	—	—	2.04"	2	Standard	1277N724	00000
3/8"	0.200"	32	Finished	12 mm	—	—	—	—	2.04"	2	Standard	1277N725	00000
3/8"	0.200"	36	Finished	5/16"	—	—	—	—	2.292"	—	Standard	1277N56	00000
3/8"	0.200"	36	Finished	10 mm	—	—	—	—	2.29"	—	Standard	1277N726	00000
3/8"	0.200"	40	Finished	5/16"	—	—	—	—	2.546"	—	Standard	1277N57	00000
3/8"	0.200"	40	Finished	12 mm	—	—	—	—	2.55"	—	Standard	1277N728	00000
3/8"	0.200"	42	Finished	5/16"	—	—	—	—	2.674"	—	Standard	1277N58	00000
3/8"	0.200"	44	Finished	5/16"	—	—	—	—	2.801"	—	Standard	1277N59	00000
3/8"	0.200"	45	Finished	3/8"	—	—	—	—	2.865"	—	Standard	1277N29	00000
3/8"	0.200"	48	Finished	5/16"	—	—	—	—	3.056"	—	Standard	1277N6	00000
3/8"	0.200"	48	Finished	12 mm	—	—	—	—	3.06"	—	Standard	1277N732	00000
3/8"	0.200"	50	Finished	3/8"	—	—	—	—	3.183"	—	Standard	1277N31	00000
3/8"	0.200"	60	Finished	3/8"	—	—	—	—	3.82"	—	Standard	1277N61	00000
3/8"	0.200"	60	Finished	12 mm	—	—	—	—	3.82"	—	Standard	1277N733	00000
3/8"	0.200"	72	Finished	12 mm	—	—	—	—	4.58"	—	Standard	1277N734	00000

For L Trade Size







				Steel

				1/2"	0.375"	10	Finished	3/8"	—	—	—	—	1.194"	2	Standard	6495K23	00000


				1/2"	0.375"	12	Finished	3/8"	—	—	—	—	1.432"	2	Standard	6495K24	00000
				1/2"	0.375"	12	Finished	5/8"	—	—	3/16"	3/32"	1.432"	2	Standard	6495K251	00000
				1/2"	0.375"	14	Finished	3/8"	—	—	—	—	1.671"	2	Standard	6495K14	00000
				1/2"	0.375"	14	Finished	5/8"	—	—	3/16"	3/32"	1.671"	2	Standard	6495K252	00000
				1/2"	0.375"	15	Finished	5/8"	—	—	3/16"	3/32"	1.79"	2	Standard	6495K253	00000
				1/2"	0.375"	15	Finished	3/4"	—	—	3/16"	3/32"	1.79"	2	Standard	6495K254	00000
				1/2"	0.375"	16	Finished	1/2"	—	—	—	—	1.91"	2	Standard	6495K15	00000
				1/2"	0.375"	16	Finished	5/8"	—	—	3/16"	3/32"	1.91"	2	Standard	6495K255	00000
				1/2"	0.375"	16	Finished	3/4"	—	—	3/16"	3/32"	1.91"	2	Standard	6495K256	00000
				1/2"	0.375"	17	Finished	5/8"	—	—	3/16"	3/32"	2.029"	2	Standard	6495K257	00000


				1/2"	0.375"	17	Finished	3/4"	—	—	3/16"	3/32"	2.029"	2	Standard	6495K258	00000
				1/2"	0.375"	18	Finished	5/8"	—	—	3/16"	3/32"	2.149"	2	Standard	6495K259	00000
				1/2"	0.375"	18	Finished	3/4"	—	—	3/16"	3/32"	2.149"	2	Standard	6495K261	00000
				1/2"	0.375"	18	Plain	1/2"	—	—	—	—	2.149"	2	Standard	6495K16	00000
				1/2"	0.375"	18	Bushing	—	Quick Disconnect (QD)	JA	—	—	2.149"	2	—	6495K211	00000
				1/2"	0.375"	19	Finished	5/8"	—	—	3/16"	3/32"	2.268"	2	Standard	6495K262	00000
				1/2"	0.375"	20	Plain	1/2"	—	—	—	—	2.387"	2	Standard	6495K17	00000
				1/2"	0.375"	20	Bushing	—	Quick Disconnect (QD)	JA	—	—	2.387"	2	—	6495K212	00000
				1/2"	0.375"	22	Plain	1/2"	—	—	—	—	2.626"	2	Standard	6495K18	00000
				1/2"	0.375"	22	Bushing	—	Quick Disconnect (QD)	JA	—	—	2.626"	2	—	6495K213	00000


				1/2"	0.375"	24	Plain	1/2"	—	—	—	—	2.865"	2	Standard	6495K19	00000
				1/2"	0.375"	24	Bushing	—	Quick Disconnect (QD)	SH	—	—	2.865"	2	—	6495K214	00000
				1/2"	0.375"	26	Plain	1/2"	—	—	—	—	3.104"	2	Standard	6495K106	00000
				1/2"	0.375"	26	Bushing	—	Quick Disconnect (QD)	SH	—	—	3.104"	2	—	6495K215	00000
				1/2"	0.375"	28	Plain	1/2"	—	—	—	—	3.342"	2	Standard	6495K107	00000
				1/2"	0.375"	28	Bushing	—	Quick Disconnect (QD)	SH	—	—	3.342"	2	—	6495K216	00000
				1/2"	0.375"	30	Plain	1/2"	—	—	—	—	3.581"	2	Standard	6495K108	000000
				1/2"	0.375"	30	Bushing	—	Quick Disconnect (QD)	SDS	—	—	3.581"	2	—	6495K217	00000
				1/2"	0.375"	32	Plain	1/2"	—	—	—	—	3.82"	2	Standard	6495K109	000000
				1/2"	0.375"	32	Bushing	—	Quick Disconnect (QD)	SDS	—	—	3.82"	2	—	6495K218	00000


				1/2"	0.375"	36	Bushing	—	Quick Disconnect (QD)	SDS	—	—	4.297"	2	—	6495K219	000000
				1/2"	0.375"	40	Bushing	—	Quick Disconnect (QD)	SDS	—	—	4.775"	2	—	6495K22	000000
				1/2"	0.375"	48	Bushing	—	Quick Disconnect (QD)	SDS	—	—	5.73"	2	—	6495K221	000000
				3/4"	0.375"	12	Finished	3/8"	—	—	—	—	1.432"	2	Standard	6495K101	00000
				3/4"	0.375"	12	Finished	5/8"	—	—	3/16"	3/32"	1.432"	2	Standard	6495K263	00000
				3/4"	0.375"	13	Finished	5/8"	—	—	3/16"	3/32"	1.552"	2	Standard	6495K264	00000
				3/4"	0.375"	14	Finished	3/8"	—	—	—	—	1.671"	2	Standard	6495K102	00000
				3/4"	0.375"	14	Finished	5/8"	—	—	3/16"	3/32"	1.671"	2	Standard	6495K265	00000
				3/4"	0.375"	15	Finished	5/8"	—	—	3/16"	3/32"	1.79"	2	Standard	6495K266	00000
				3/4"	0.375"	15	Finished	3/4"	—	—	3/16"	3/32"	1.79"	2	Standard	6495K267	00000


				3/4"	0.375"	16	Finished	1/2"	—	—	—	—	1.91"	2	Standard	6495K103	00000
				3/4"	0.375"	16	Finished	5/8"	—	—	3/16"	3/32"	1.91"	2	Standard	6495K268	00000
				3/4"	0.375"	16	Finished	3/4"	—	—	3/16"	3/32"	1.91"	2	Standard	6495K269	00000
				3/4"	0.375"	17	Finished	5/8"	—	—	3/16"	3/32"	2.029"	2	Standard	6495K271	00000
3/4"				0.375"	17	Finished	3/4"	—	—	3/16"	3/32"	2.029"	2	Standard	6495K272	00000
3/4"	0.375"			18	Plain	1/2"	—	—	—	—	2.149"	2	Standard	6495K882	00000
3/4"	0.375"			18	Bushing	—	Quick Disconnect (QD)	JA	—	—	2.149"	2	—	6495K311	00000
3/4"	0.375"			20	Plain	1/2"	—	—	—	—	2.387"	2	Standard	6495K883	00000
3/4"	0.375"			20	Bushing	—	Quick Disconnect (QD)	JA	—	—	2.387"	2	—	6495K312	00000
3/4"	0.375"	22		Plain	5/8"	—	—	—	—	2.626"	2	Standard	6495K881	00000
3/4"	0.375"	22	Bushing	—	Quick Disconnect (QD)	JA	—	—	2.626"	2	—	6495K313	00000
3/4"	0.375"	24	Plain	5/8"	—	—	—	—	2.865"	2	Standard	6495K885	000000
3/4"	0.375"	24	Bushing	—	Quick Disconnect (QD)	SH	—	—	2.865"	2	—	6495K314	00000
3/4"	0.375"	26	Plain	5/8"	—	—	—	—	3.104"	2	Standard	6495K886	000000
3/4"	0.375"	26	Bushing	—	Quick Disconnect (QD)	SH	—	—	3.104"	2	—	6495K315	00000
3/4"	0.375"	28	Plain	5/8"	—	—	—	—	3.342"	2	Standard	6495K887	000000
3/4"	0.375"	28	Bushing	—	Quick Disconnect (QD)	SH	—	—	3.342"	2	—	6495K316	00000
3/4"	0.375"	30	Plain	5/8"	—	—	—	—	3.581"	2	Standard	6495K878	000000
3/4"	0.375"	30	Bushing	—	Quick Disconnect (QD)	SDS	—	—	3.581"	2	—	6495K317	00000
3/4"	0.375"	32	Plain	5/8"	—	—	—	—	3.82"	2	Standard	6495K889	000000
3/4"	0.375"	32	Bushing	—	Quick Disconnect (QD)	SDS	—	—	3.82"	2	—	6495K318	00000
3/4"	0.375"	36	Bushing	—	Quick Disconnect (QD)	SDS	—	—	4.297"	2	—	6495K319	000000
3/4"	0.375"	40	Bushing	—	Quick Disconnect (QD)	SDS	—	—	4.775"	2	—	6495K32	000000
3/4"	0.375"	48	Bushing	—	Quick Disconnect (QD)	SDS	—	—	5.73"	2	—	6495K321	000000
1"	0.375"	14	Finished	3/8"	—	—	—	—	1.671"	2	Standard	6495K104	00000
1"	0.375"	14	Finished	5/8"	—	—	3/16"	3/32"	1.671"	2	Standard	6495K273	00000
1"	0.375"	15	Finished	5/8"	—	—	3/16"	3/32"	1.79"	2	Standard	6495K274	00000
1"	0.375"	15	Finished	3/4"	—	—	3/16"	3/32"	1.79"	2	Standard	6495K275	00000
1"	0.375"	16	Finished	1/2"	—	—	—	—	1.91"	2	Standard	6495K105	00000
1"	0.375"	16	Finished	5/8"	—	—	3/16"	3/32"	1.91"	2	Standard	6495K276	00000
1"	0.375"	16	Finished	3/4"	—	—	3/16"	3/32"	1.91"	2	Standard	6495K277	00000
1"	0.375"	17	Finished	5/8"	—	—	3/16"	3/32"	2.029"	2	Standard	6495K278	00000
1"	0.375"	17	Finished	3/4"	—	—	3/16"	3/32"	2.029"	2	Standard	6495K279	00000
1"	0.375"	18	Plain	1/2"	—	—	—	—	2.149"	2	Standard	6495K891	00000
1"	0.375"	18	Bushing	—	Quick Disconnect (QD)	JA	—	—	2.149"	2	—	6495K411	00000
1"	0.375"	20	Plain	1/2"	—	—	—	—	2.387"	2	Standard	6495K892	00000
1"	0.375"	20	Bushing	—	Quick Disconnect (QD)	JA	—	—	2.387"	2	—	6495K412	00000
1"	0.375"	22	Plain	5/8"	—	—	—	—	2.626"	2	Standard	6495K893	00000
1"	0.375"	22	Bushing	—	Quick Disconnect (QD)	JA	—	—	2.626"	2	—	6495K413	00000
1"	0.375"	24	Plain	5/8"	—	—	—	—	2.865"	2	Standard	6495K894	000000
1"	0.375"	24	Bushing	—	Quick Disconnect (QD)	SH	—	—	2.865"	2	—	6495K414	00000
1"	0.375"	26	Plain	5/8"	—	—	—	—	3.104"	2	Standard	6495K895	000000
1"	0.375"	26	Bushing	—	Quick Disconnect (QD)	SH	—	—	3.104"	2	—	6495K415	00000
1"	0.375"	28	Plain	5/8"	—	—	—	—	3.342"	2	Standard	6495K896	000000
1"	0.375"	28	Bushing	—	Quick Disconnect (QD)	SH	—	—	3.342"	2	—	6495K416	00000
1"	0.375"	30	Plain	5/8"	—	—	—	—	3.581"	2	Standard	6495K897	000000
1"	0.375"	30	Bushing	—	Quick Disconnect (QD)	SDS	—	—	3.581"	2	—	6495K417	00000
1"	0.375"	32	Plain	5/8"	—	—	—	—	3.82"	2	Standard	6495K898	000000
1"	0.375"	32	Bushing	—	Quick Disconnect (QD)	SDS	—	—	3.82"	2	—	6495K418	00000
1"	0.375"	36	Bushing	—	Quick Disconnect (QD)	SDS	—	—	4.297"	2	—	6495K419	000000
1"	0.375"	40	Bushing	—	Quick Disconnect (QD)	SDS	—	—	4.775"	2	—	6495K42	000000
1"	0.375"	48	Bushing	—	Quick Disconnect (QD)	SDS	—	—	5.73"	2	—	6495K421	000000



		Iron

		1/2"	0.375"	60	Bushing	—	Quick Disconnect (QD)	SD	—	—	7.162"	—	—	6495K222	000000


		3/4"	0.375"	60	Bushing	—	Quick Disconnect (QD)	SD	—	—	7.162"	—	—	6495K322	000000
		1"	0.375"	60	Bushing	—	Quick Disconnect (QD)	SD	—	—	7.162"	—	—	6495K422	000000




				Corrosion-Resistant Aluminum

				1/2"	0.375"	10	Finished	10 mm	—	—	—	—	1.19"	2	Standard	3567N11	00000


				1/2"	0.375"	12	Finished	10 mm	—	—	—	—	1.43"	2	Standard	3567N12	00000
				1/2"	0.375"	13	Finished	10 mm	—	—	—	—	1.55"	2	Standard	3567N13	00000
				1/2"	0.375"	14	Finished	12 mm	—	—	—	—	1.67"	2	Standard	3567N14	00000
				1/2"	0.375"	15	Finished	12 mm	—	—	—	—	1.79"	2	Standard	3567N15	00000
				1/2"	0.375"	16	Finished	14 mm	—	—	—	—	1.91"	2	Standard	3567N16	00000
				1/2"	0.375"	17	Finished	14 mm	—	—	—	—	2.03"	2	Standard	3567N17	00000
				1/2"	0.375"	18	Finished	1/2"	—	—	—	—	2.149"	2	Standard	1304N11	00000
				1/2"	0.375"	18	Finished	14 mm	—	—	—	—	2.15"	2	Standard	3567N18	00000
				1/2"	0.375"	20	Finished	1/2"	—	—	—	—	2.387"	2	Standard	1304N12	00000
				1/2"	0.375"	20	Finished	14 mm	—	—	—	—	2.39"	2	Standard	3567N21	00000


				1/2"	0.375"	22	Finished	1/2"	—	—	—	—	2.626"	2	Standard	1304N13	00000
				1/2"	0.375"	22	Finished	14 mm	—	—	—	—	2.63"	2	Standard	3567N22	00000
				1/2"	0.375"	24	Finished	1/2"	—	—	—	—	2.865"	2	Standard	1304N14	00000
				1/2"	0.375"	24	Finished	14 mm	—	—	—	—	2.86"	2	Standard	3567N23	00000
				1/2"	0.375"	26	Finished	1/2"	—	—	—	—	3.104"	2	Standard	1304N15	00000
				1/2"	0.375"	26	Finished	14 mm	—	—	—	—	3.1"	2	Standard	3567N24	000000
				1/2"	0.375"	28	Finished	1/2"	—	—	—	—	3.342"	2	Standard	1304N16	00000
				1/2"	0.375"	30	Finished	1/2"	—	—	—	—	3.581"	2	Standard	1304N17	00000
				1/2"	0.375"	30	Finished	14 mm	—	—	—	—	3.58"	2	Standard	3567N26	000000
				1/2"	0.375"	32	Finished	1/2"	—	—	—	—	3.82"	2	Standard	1304N18	00000


				1/2"	0.375"	32	Finished	14 mm	—	—	—	—	3.82"	2	Standard	3567N27	000000
				1/2"	0.375"	36	Finished	1/2"	—	—	—	—	4.297"	2	Standard	1304N19	00000
				1/2"	0.375"	40	Finished	1/2"	—	—	—	—	4.775"	2	Standard	1304N2	000000
				1/2"	0.375"	40	Finished	14 mm	—	—	—	—	4.77"	2	Standard	3567N29	000000
				3/4"	0.375"	18	Finished	1/2"	—	—	—	—	2.149"	2	Standard	1304N21	00000
				3/4"	0.375"	20	Finished	1/2"	—	—	—	—	2.387"	2	Standard	1304N22	00000
				3/4"	0.375"	22	Finished	1/2"	—	—	—	—	2.626"	2	Standard	1304N23	00000
				3/4"	0.375"	24	Finished	1/2"	—	—	—	—	2.865"	2	Standard	1304N24	00000
				3/4"	0.375"	26	Finished	1/2"	—	—	—	—	3.104"	2	Standard	1304N25	00000
				3/4"	0.375"	28	Finished	1/2"	—	—	—	—	3.342"	2	Standard	1304N26	00000


				3/4"	0.375"	30	Finished	1/2"	—	—	—	—	3.581"	2	Standard	1304N27	00000
				3/4"	0.375"	32	Finished	1/2"	—	—	—	—	3.82"	2	Standard	1304N28	00000
				3/4"	0.375"	36	Finished	1/2"	—	—	—	—	4.297"	2	Standard	1304N29	00000
				3/4"	0.375"	40	Finished	1/2"	—	—	—	—	4.775"	2	Standard	1304N3	000000
				1"	0.375"	18	Finished	1/2"	—	—	—	—	2.149"	2	Standard	1304N31	00000
				1"	0.375"	20	Finished	1/2"	—	—	—	—	2.387"	2	Standard	1304N32	00000
				1"	0.375"	22	Finished	1/2"	—	—	—	—	2.626"	2	Standard	1304N33	00000
				1"	0.375"	24	Finished	1/2"	—	—	—	—	2.865"	2	Standard	1304N34	00000
				1"	0.375"	26	Finished	1/2"	—	—	—	—	3.104"	2	Standard	1304N35	00000
				1"	0.375"	28	Finished	1/2"	—	—	—	—	3.342"	2	Standard	1304N36	00000


1"	0.375"			30	Finished	1/2"	—	—	—	—	3.581"	2	Standard	1304N37	00000
1"	0.375"			32	Finished	1/2"	—	—	—	—	3.82"	2	Standard	1304N38	00000
1"	0.375"			36	Finished	1/2"	—	—	—	—	4.297"	2	Standard	1304N39	000000
1"	0.375"			40	Finished	1/2"	—	—	—	—	4.775"	2	Standard	1304N4	000000


For H Trade Size







				Steel

				1"	0.500"	14	Plain	5/8"	—	—	—	—	2.228"	2	Standard	6495K43	00000


				1"	0.500"	14	Bushing	—	Quick Disconnect (QD)	JA	—	—	2.228"	2	—	6495K511	00000
				1"	0.500"	16	Plain	5/8"	—	—	—	—	2.546"	2	Standard	6495K44	00000
				1"	0.500"	16	Bushing	—	Quick Disconnect (QD)	JA	—	—	2.546"	2	—	6495K512	00000
				1"	0.500"	18	Plain	5/8"	—	—	—	—	2.865"	2	Standard	6495K45	00000
				1"	0.500"	18	Bushing	—	Quick Disconnect (QD)	SH	—	—	2.865"	2	—	6495K513	00000
				1"	0.500"	20	Plain	5/8"	—	—	—	—	3.183"	2	Standard	6495K46	000000
				1"	0.500"	20	Bushing	—	Quick Disconnect (QD)	SH	—	—	3.183"	2	—	6495K514	00000
				1"	0.500"	21	Plain	3/4"	—	—	—	—	3.342"	2	Standard	6495K91	000000
				1"	0.500"	22	Plain	3/4"	—	—	—	—	3.501"	2	Standard	6495K92	000000
				1"	0.500"	22	Bushing	—	Quick Disconnect (QD)	SDS	—	—	3.501"	2	—	6495K515	00000


				1"	0.500"	24	Plain	3/4"	—	—	—	—	3.82"	2	Standard	6495K47	000000
				1"	0.500"	24	Bushing	—	Quick Disconnect (QD)	SDS	—	—	3.82"	2	—	6495K516	000000
				1"	0.500"	26	Plain	3/4"	—	—	—	—	4.138"	2	Standard	6495K93	000000
				1"	0.500"	26	Bushing	—	Quick Disconnect (QD)	SDS	—	—	4.138"	2	—	6495K517	000000
				1"	0.500"	28	Plain	3/4"	—	—	—	—	4.456"	2	Standard	6495K48	000000
				1"	0.500"	28	Bushing	—	Quick Disconnect (QD)	SDS	—	—	4.456"	2	—	6495K518	000000
				1 1/2"	0.500"	14	Plain	3/4"	—	—	—	—	2.228"	2	Standard	6495K94	000000
				1 1/2"	0.500"	14	Bushing	—	Quick Disconnect (QD)	JA	—	—	2.228"	2	—	6495K611	00000
				1 1/2"	0.500"	16	Plain	3/4"	—	—	—	—	2.546"	2	Standard	6495K95	000000
				1 1/2"	0.500"	16	Bushing	—	Quick Disconnect (QD)	JA	—	—	2.546"	2	—	6495K612	00000


				1 1/2"	0.500"	18	Plain	3/4"	—	—	—	—	2.865"	2	Standard	6495K96	000000
				1 1/2"	0.500"	18	Bushing	—	Quick Disconnect (QD)	SH	—	—	2.865"	2	—	6495K613	00000
				1 1/2"	0.500"	19	Plain	3/4"	—	—	—	—	3.024"	2	Standard	6495K97	000000
				1 1/2"	0.500"	20	Plain	3/4"	—	—	—	—	3.183"	2	Standard	6495K98	000000
				1 1/2"	0.500"	20	Bushing	—	Quick Disconnect (QD)	SH	—	—	3.183"	2	—	6495K614	000000
				1 1/2"	0.500"	21	Plain	3/4"	—	—	—	—	3.342"	2	Standard	6495K99	000000
				1 1/2"	0.500"	22	Plain	3/4"	—	—	—	—	3.501"	2	Standard	6495K161	000000
				1 1/2"	0.500"	22	Bushing	—	Quick Disconnect (QD)	SD	—	—	3.501"	2	—	6495K615	000000
				1 1/2"	0.500"	24	Plain	3/4"	—	—	—	—	3.82"	2	Standard	6495K162	000000
				1 1/2"	0.500"	24	Bushing	—	Quick Disconnect (QD)	SD	—	—	3.82"	2	—	6495K616	000000


				1 1/2"	0.500"	26	Plain	3/4"	—	—	—	—	4.138"	2	Standard	6495K163	000000
				1 1/2"	0.500"	26	Bushing	—	Quick Disconnect (QD)	SD	—	—	4.138"	2	—	6495K617	000000
				1 1/2"	0.500"	28	Bushing	—	Quick Disconnect (QD)	SD	—	—	4.456"	2	—	6495K618	000000
				2"	0.500"	14	Plain	3/4"	—	—	—	—	2.228"	2	Standard	6495K164	000000
				2"	0.500"	14	Bushing	—	Quick Disconnect (QD)	JA	—	—	2.228"	2	—	6495K811	00000
				2"	0.500"	16	Plain	3/4"	—	—	—	—	2.546"	2	Standard	6495K165	000000
				2"	0.500"	16	Bushing	—	Quick Disconnect (QD)	JA	—	—	2.546"	2	—	6495K812	00000
				2"	0.500"	18	Plain	3/4"	—	—	—	—	2.865"	2	Standard	6495K166	000000
				2"	0.500"	18	Bushing	—	Quick Disconnect (QD)	SH	—	—	2.865"	2	—	6495K813	000000
				2"	0.500"	19	Plain	3/4"	—	—	—	—	3.024"	2	Standard	6495K167	000000


				2"	0.500"	20	Plain	3/4"	—	—	—	—	3.183"	2	Standard	6495K168	000000
				2"	0.500"	22	Plain	1"	—	—	—	—	3.501"	2	Standard	6495K169	000000
				2"	0.500"	24	Plain	1"	—	—	—	—	3.82"	2	Standard	6495K171	000000
				2"	0.500"	26	Plain	1"	—	—	—	—	4.138"	2	Standard	6495K172	000000
3"				0.500"	16	Plain	3/4"	—	—	—	—	2.546"	2	Standard	6495K173	000000




		Iron

		1"	0.500"	30	Bushing	—	Quick Disconnect (QD)	SD	—	—	4.775"	2	—	6495K519	000000


		1"	0.500"	32	Bushing	—	Quick Disconnect (QD)	SK	—	—	5.093"	2	—	6495K52	000000
		1"	0.500"	36	Bushing	—	Quick Disconnect (QD)	SK	—	—	5.73"	2	—	6495K521	000000
		1"	0.500"	40	Bushing	—	Quick Disconnect (QD)	SK	—	—	6.366"	2	—	6495K522	000000
		1"	0.500"	48	Bushing	—	Quick Disconnect (QD)	SK	—	—	7.639"	2	—	6495K523	000000
		1"	0.500"	60	Bushing	—	Quick Disconnect (QD)	SF	—	—	9.549"	—	—	6495K524	000000
		1"	0.500"	120	Bushing	—	Quick Disconnect (QD)	SF	—	—	19.099"	—	—	6495K525	000000
		1 1/2"	0.500"	30	Bushing	—	Quick Disconnect (QD)	SD	—	—	4.775"	2	—	6495K619	000000
		1 1/2"	0.500"	32	Bushing	—	Quick Disconnect (QD)	SK	—	—	5.093"	2	—	6495K62	000000
		1 1/2"	0.500"	36	Bushing	—	Quick Disconnect (QD)	SK	—	—	5.73"	2	—	6495K621	000000
		1 1/2"	0.500"	40	Bushing	—	Quick Disconnect (QD)	SK	—	—	6.366"	2	—	6495K622	000000


		1 1/2"	0.500"	48	Bushing	—	Quick Disconnect (QD)	SK	—	—	7.639"	2	—	6495K623	000000
		1 1/2"	0.500"	60	Bushing	—	Quick Disconnect (QD)	SF	—	—	9.549"	—	—	6495K624	000000
		1 1/2"	0.500"	120	Bushing	—	Quick Disconnect (QD)	SF	—	—	19.099"	—	—	6495K625	000000
		2"	0.500"	20	Bushing	—	Quick Disconnect (QD)	SH	—	—	3.183"	2	—	6495K814	000000
		2"	0.500"	22	Bushing	—	Quick Disconnect (QD)	SD	—	—	3.501"	2	—	6495K815	000000
		2"	0.500"	24	Bushing	—	Quick Disconnect (QD)	SD	—	—	3.82"	2	—	6495K816	000000
		2"	0.500"	26	Bushing	—	Quick Disconnect (QD)	SD	—	—	4.138"	2	—	6495K817	000000
		2"	0.500"	28	Bushing	—	Quick Disconnect (QD)	SD	—	—	4.456"	2	—	6495K818	000000
		2"	0.500"	30	Bushing	—	Quick Disconnect (QD)	SD	—	—	4.775"	2	—	6495K819	000000
		2"	0.500"	32	Bushing	—	Quick Disconnect (QD)	SK	—	—	5.093"	2	—	6495K82	000000


		2"	0.500"	36	Bushing	—	Quick Disconnect (QD)	SK	—	—	5.73"	2	—	6495K821	000000
		2"	0.500"	40	Bushing	—	Quick Disconnect (QD)	SK	—	—	6.366"	2	—	6495K822	000000
		2"	0.500"	48	Bushing	—	Quick Disconnect (QD)	SF	—	—	7.639"	2	—	6495K823	000000
		2"	0.500"	60	Bushing	—	Quick Disconnect (QD)	SF	—	—	9.549"	—	—	6495K824	000000
		2"	0.500"	120	Bushing	—	Quick Disconnect (QD)	E	—	—	19.099"	—	—	6495K825	000000


		For XH Trade Size







						Iron

						2"	0.875"	18	Plain	1"	—	—	—	—	5.013"	2	Standard	5728N11	000000


						2"	0.875"	18	Bushing	—	Quick Disconnect (QD)	SK	—	—	5.013"	2	—	5732N11	000000
						2"	0.875"	20	Plain	1"	—	—	—	—	5.57"	2	Standard	5728N12	000000
						2"	0.875"	20	Bushing	—	Quick Disconnect (QD)	SK	—	—	5.57"	2	—	5732N12	000000
						2"	0.875"	22	Bushing	—	Quick Disconnect (QD)	SK	—	—	6.127"	2	—	5732N13	000000
						2"	0.875"	23	Bushing	—	Quick Disconnect (QD)	SK	—	—	6.406"	2	—	5732N14	000000
						2"	0.875"	24	Bushing	—	Quick Disconnect (QD)	SF	—	—	6.685"	2	—	5732N15	000000
						2"	0.875"	26	Bushing	—	Quick Disconnect (QD)	SF	—	—	7.241"	2	—	5732N16	000000
						2"	0.875"	28	Bushing	—	Quick Disconnect (QD)	F	—	—	7.799"	2	—	5732N17	000000
						2"	0.875"	30	Bushing	—	Quick Disconnect (QD)	F	—	—	8.356"	2	—	5732N18	000000
						2"	0.875"	32	Bushing	—	Quick Disconnect (QD)	F	—	—	8.913"	2	—	5732N19	000000


						2"	0.875"	36	Bushing	—	Quick Disconnect (QD)	F	—	—	10.027"	2	—	5732N21	000000
2"						0.875"	40	Bushing	—	Quick Disconnect (QD)	F	—	—	11.141"	2	—	5732N22	000000
2"	0.875"					48	Bushing	—	Quick Disconnect (QD)	F	—	—	13.369"	—	—	5732N23	00000000
2"	0.875"					60	Bushing	—	Quick Disconnect (QD)	F	—	—	16.711"	—	—	5732N24	00000000
3"	0.875"					18	Plain	1"	—	—	—	—	5.013"	2	Standard	5728N13	000000
3"	0.875"					18	Bushing	—	Quick Disconnect (QD)	SK	—	—	5.013"	2	—	5732N25	000000
3"	0.875"					20	Plain	1"	—	—	—	—	5.57"	2	Standard	5728N14	000000
3"	0.875"					20	Bushing	—	Quick Disconnect (QD)	SK	—	—	5.57"	2	—	5732N26	000000
3"	0.875"					22	Bushing	—	Quick Disconnect (QD)	SK	—	—	6.127"	2	—	5732N27	000000
3"	0.875"					24	Bushing	—	Quick Disconnect (QD)	SF	—	—	6.685"	2	—	5732N28	000000


3"	0.875"					26	Bushing	—	Quick Disconnect (QD)	SF	—	—	7.241"	2	—	5732N29	000000
3"	0.875"					28	Bushing	—	Quick Disconnect (QD)	E	—	—	7.799"	2	—	5732N31	000000
3"	0.875"					30	Bushing	—	Quick Disconnect (QD)	E	—	—	8.356"	2	—	5732N32	000000
3"	0.875"					36	Bushing	—	Quick Disconnect (QD)	E	—	—	10.027"	2	—	5732N33	00000000
3"	0.875"					40	Bushing	—	Quick Disconnect (QD)	F	—	—	11.141"	2	—	5732N34	00000000
3"	0.875"					48	Bushing	—	Quick Disconnect (QD)	F	—	—	13.369"	—	—	5732N35	00000000
4"	0.875"					18	Plain	1"	—	—	—	—	5.013"	2	Standard	5728N15	000000
4"	0.875"					20	Plain	1"	—	—	—	—	5.57"	2	Standard	5728N16	000000
4"	0.875"					20	Bushing	—	Quick Disconnect (QD)	SK	—	—	5.57"	2	—	5732N36	000000
4"	0.875"					22	Bushing	—	Quick Disconnect (QD)	SK	—	—	6.127"	2	—	5732N37	000000


4"	0.875"					24	Plain	1"	—	—	—	—	6.685"	2	Standard	5728N17	000000
4"	0.875"					24	Bushing	—	Quick Disconnect (QD)	SF	—	—	6.685"	2	—	5732N38	000000
4"	0.875"					26	Plain	1"	—	—	—	—	7.241"	2	Standard	5728N18	000000
4"	0.875"					26	Bushing	—	Quick Disconnect (QD)	SF	—	—	7.241"	2	—	5732N39	000000
4"	0.875"					28	Bushing	—	Quick Disconnect (QD)	E	—	—	7.799"	2	—	5732N41	000000
4"	0.875"					30	Bushing	—	Quick Disconnect (QD)	E	—	—	8.356"	2	—	5732N42	00000000
4"	0.875"					32	Bushing	—	Quick Disconnect (QD)	E	—	—	8.913"	2	—	5732N43	00000000
4"	0.875"					36	Bushing	—	Quick Disconnect (QD)	E	—	—	10.027"	2	—	5732N44	00000000


For XXH Trade Size







			Iron

			2"				1.25"	22	Bushing	—	Quick Disconnect (QD)	E	—	—	8.753"	2	—	5471N11	000000


			2"	1.25"			30	Bushing	—	Quick Disconnect (QD)	F	—	—	11.937"	2	—	5471N12	000000
			2"	1.25"	48		Bushing	—	Quick Disconnect (QD)	J	—	—	19.099"	—	—	5471N13	00000000
			3"	1.25"	22		Bushing	—	Quick Disconnect (QD)	E	—	—	8.753"	2	—	5471N14	000000
			3"	1.25"	30		Bushing	—	Quick Disconnect (QD)	F	—	—	11.937"	2	—	5471N15	00000000
			4"	1.25"	22		Bushing	—	Quick Disconnect (QD)	E	—	—	8.753"	2	—	5471N16	000000
			4"	1.25"	34		Bushing	—	Quick Disconnect (QD)	J	—	—	13.528"	2	—	5471N17	00000000


			For T2.5 Trade Size







								Corrosion-Resistant Aluminum

								6 mm	2.5 mm	15	Plain	—	—	—	—	—	12 mm	1	Standard	3568N101	00000


								6 mm	2.5 mm	20	Plain	—	—	—	—	—	16 mm	2	Standard	3568N102	00000
								6 mm	2.5 mm	28	Plain	—	—	—	—	—	22 mm	2	Standard	3568N103	00000
								6 mm	2.5 mm	44	Plain	—	—	—	—	—	35 mm	—	Standard	3568N104	00000
								6 mm	2.5 mm	48	Plain	—	—	—	—	—	38 mm	—	Standard	3568N105	00000
								6 mm	2.5 mm	60	Plain	—	—	—	—	—	48 mm	—	Standard	3568N106	00000


								For T5 Trade Size







												Corrosion-Resistant Aluminum

												10 mm	5 mm	10	Plain	—	—	—	—	—	16.1 mm	2	Standard	1428N2	00000


												10 mm	5 mm	12	Plain	—	—	—	—	—	19.3 mm	2	Standard	1428N21	00000
												10 mm	5 mm	14	Plain	—	—	—	—	—	22.5 mm	2	Standard	1428N22	00000
												10 mm	5 mm	15	Plain	—	—	—	—	—	24.1 mm	2	Standard	1428N23	00000
												10 mm	5 mm	16	Plain	—	—	—	—	—	25.6 mm	2	Standard	1428N24	00000
												10 mm	5 mm	18	Plain	—	—	—	—	—	28.8 mm	2	Standard	1428N25	00000
												10 mm	5 mm	19	Plain	—	—	—	—	—	30.4 mm	2	Standard	1428N26	00000
												10 mm	5 mm	20	Plain	—	—	—	—	—	32 mm	2	Standard	1428N27	00000
												10 mm	5 mm	22	Plain	—	—	—	—	—	35.3 mm	2	Standard	1428N28	00000
												10 mm	5 mm	24	Plain	—	—	—	—	—	38.4 mm	2	Standard	1428N29	00000
												10 mm	5 mm	25	Plain	—	—	—	—	—	40 mm	2	Standard	1428N3	00000


10 mm	5 mm											26	Plain	—	—	—	—	—	41.6 mm	2	Standard	1428N31	00000
10 mm	5 mm											27	Plain	—	—	—	—	—	43.2 mm	2	Standard	1428N32	00000
10 mm	5 mm											30	Plain	—	—	—	—	—	47.8 mm	2	Standard	1428N33	00000
10 mm	5 mm											32	Plain	—	—	—	—	—	50.9 mm	2	Standard	1428N34	00000
10 mm	5 mm											36	Plain	—	—	—	—	—	57.3 mm	2	Standard	1428N35	00000
10 mm	5 mm	40										Plain	—	—	—	—	—	63.7 mm	2	Standard	1428N36	00000
10 mm	5 mm	48				Plain						—	—	—	—	—	76.4 mm	—	Standard	1428N37	00000
10 mm	5 mm	60				Plain						—	—	—	—	—	95.5 mm	—	Standard	1428N38	00000
16 mm	5 mm	10				Plain						—	—	—	—	—	16.1 mm	2	Standard	1428N4	00000
16 mm	5 mm	12				Plain						—	—	—	—	—	19.3 mm	2	Standard	1428N41	00000


16 mm	5 mm	14				Plain						—	—	—	—	—	22.5 mm	2	Standard	1428N42	00000
16 mm	5 mm	15				Plain						—	—	—	—	—	24.1 mm	2	Standard	1428N43	00000
16 mm	5 mm	16				Plain						—	—	—	—	—	25.6 mm	2	Standard	1428N44	00000
16 mm	5 mm	18				Plain						—	—	—	—	—	28.8 mm	2	Standard	1428N45	00000
16 mm	5 mm	19				Plain						—	—	—	—	—	30.4 mm	2	Standard	1428N46	00000
16 mm	5 mm	20				Plain						—	—	—	—	—	32 mm	2	Standard	1428N47	00000
16 mm	5 mm	22				Plain						—	—	—	—	—	35.3 mm	2	Standard	1428N48	00000
16 mm	5 mm	24				Plain						—	—	—	—	—	38.4 mm	2	Standard	1428N49	00000
16 mm	5 mm	25	Plain			—						—	—	—	—	40 mm	2	Standard	1428N5	00000
16 mm	5 mm	26	Plain	—		—						—	—	—	41.6 mm	2	Standard	1428N51	00000


16 mm	5 mm	27	Plain	—		—						—	—	—	43.2 mm	2	Standard	1428N52	00000
16 mm	5 mm	30	Plain	—	—	—						—	—	48 mm	2	Standard	1428N53	00000
16 mm	5 mm	32	Plain	—	—	—	—					—	51.1 mm	2	Standard	1428N54	00000
16 mm	5 mm	36	Plain	—	—	—	—					—	57.5 mm	2	Standard	1428N55	00000
16 mm	5 mm	40	Plain	—	—	—	—					—	63.9 mm	2	Standard	1428N56	00000
16 mm	5 mm	48	Plain	—	—	—	—					—	76.6 mm	—	Standard	1428N57	00000
16 mm	5 mm	60	Plain	—	—	—	—					—	95.7 mm	—	Standard	1428N58	00000
25 mm	5 mm	10	Plain	—	—	—	—					—	16.1 mm	2	Standard	1428N6	00000
25 mm	5 mm	14	Plain	—	—	—	—					—	22.5 mm	2	Standard	1428N62	00000
25 mm	5 mm	15	Plain	—	—	—	—					—	24.1 mm	2	Standard	1428N63	00000


25 mm	5 mm	16	Plain	—	—	—	—					—	25.6 mm	2	Standard	1428N64	00000
25 mm	5 mm	18	Plain	—	—	—	—					—	28.8 mm	2	Standard	1428N65	00000
25 mm	5 mm	20	Plain	—	—	—	—					—	32 mm	2	Standard	1428N67	00000
25 mm	5 mm	22	Plain	—	—	—	—					—	35.3 mm	2	Standard	1428N68	00000
25 mm	5 mm	24	Plain	—	—	—	—	—				38.4 mm	2	Standard	1428N69	00000
25 mm	5 mm	25	Plain	—	—	—	—	—	40 mm			2	Standard	1428N7	00000
25 mm	5 mm	26	Plain	—	—	—	—	—	41.6 mm			2	Standard	1428N71	00000
25 mm	5 mm	27	Plain	—	—	—	—	—	43.2 mm			2	Standard	1428N72	00000
25 mm	5 mm	30	Plain	—	—	—	—	—	48 mm			2	Standard	1428N73	00000
25 mm	5 mm	32	Plain	—	—	—	—	—	51.1 mm	2		Standard	1428N74	00000
25 mm	5 mm	36	Plain	—	—	—	—	—	57.5 mm	2	Standard	1428N75	00000
25 mm	5 mm	40	Plain	—	—	—	—	—	63.9 mm	2	Standard	1428N76	00000
25 mm	5 mm	48	Plain	—	—	—	—	—	76.6 mm	—	Standard	1428N77	00000
25 mm	5 mm	60	Plain	—	—	—	—	—	95.7 mm	—	Standard	1428N78	00000

For AT5 Trade Size







				Corrosion-Resistant Aluminum

				10 mm	5 mm	12	Plain	—	—	—	—	—	19.3 mm	2	Standard	3709N11	00000


				10 mm	5 mm	15	Plain	—	—	—	—	—	24.1 mm	2	Standard	3709N13	00000
				10 mm	5 mm	20	Plain	—	—	—	—	—	32 mm	2	Standard	3709N17	00000
				10 mm	5 mm	22	Plain	—	—	—	—	—	35.3 mm	2	Standard	3709N18	00000
				10 mm	5 mm	24	Plain	—	—	—	—	—	38.4 mm	2	Standard	3709N19	00000
				10 mm	5 mm	27	Plain	—	—	—	—	—	43.2 mm	2	Standard	3709N23	00000
				10 mm	5 mm	30	Plain	8 mm	—	—	—	—	48 mm	2	Standard	3709N25	00000
				10 mm	5 mm	42	Plain	8 mm	—	—	—	—	67 mm	2	Standard	3709N29	00000
				10 mm	5 mm	60	Plain	8 mm	—	—	—	—	95.7 mm	—	Standard	3709N33	00000
				16 mm	5 mm	12	Plain	—	—	—	—	—	19.3 mm	2	Standard	3709N34	00000
				16 mm	5 mm	18	Plain	—	—	—	—	—	28.8 mm	2	Standard	3709N38	00000


				16 mm	5 mm	20	Plain	—	—	—	—	—	32 mm	2	Standard	3709N41	00000
				16 mm	5 mm	22	Plain	—	—	—	—	—	35.3 mm	2	Standard	3709N42	00000
				16 mm	5 mm	24	Plain	—	—	—	—	—	38.4 mm	2	Standard	3709N43	00000
				16 mm	5 mm	25	Plain	—	—	—	—	—	40 mm	2	Standard	3709N44	00000
				16 mm	5 mm	26	Plain	—	—	—	—	—	41.6 mm	2	Standard	3709N45	00000
				16 mm	5 mm	27	Plain	8 mm	—	—	—	—	43.2 mm	2	Standard	3709N46	00000
				16 mm	5 mm	28	Plain	8 mm	—	—	—	—	44.8 mm	2	Standard	3709N47	00000
				16 mm	5 mm	30	Plain	8 mm	—	—	—	—	48 mm	2	Standard	3709N48	00000
				16 mm	5 mm	32	Plain	8 mm	—	—	—	—	51.1 mm	2	Standard	3709N49	00000
				16 mm	5 mm	36	Plain	8 mm	—	—	—	—	57.5 mm	2	Standard	3709N51	00000


				16 mm	5 mm	40	Plain	8 mm	—	—	—	—	63.9 mm	2	Standard	3709N52	00000
				16 mm	5 mm	42	Plain	8 mm	—	—	—	—	67 mm	2	Standard	3709N53	00000
				16 mm	5 mm	44	Plain	8 mm	—	—	—	—	70.2 mm	—	Standard	3709N54	00000
				16 mm	5 mm	60	Plain	8 mm	—	—	—	—	95.7 mm	—	Standard	3709N56	000000
				25 mm	5 mm	16	Plain	—	—	—	—	—	25.6 mm	2	Standard	3709N61	00000
				25 mm	5 mm	20	Plain	—	—	—	—	—	32 mm	2	Standard	3709N64	00000
				25 mm	5 mm	22	Plain	—	—	—	—	—	35.3 mm	2	Standard	3709N65	00000
				25 mm	5 mm	24	Plain	—	—	—	—	—	38.4 mm	2	Standard	3709N66	00000
				25 mm	5 mm	25	Plain	—	—	—	—	—	40 mm	2	Standard	3709N67	00000
				25 mm	5 mm	26	Plain	—	—	—	—	—	41.6 mm	2	Standard	3709N68	00000


				25 mm	5 mm	27	Plain	8 mm	—	—	—	—	43.2 mm	2	Standard	3709N69	00000
				25 mm	5 mm	30	Plain	8 mm	—	—	—	—	48 mm	2	Standard	3709N72	00000
				25 mm	5 mm	32	Plain	8 mm	—	—	—	—	51.1 mm	2	Standard	3709N73	00000
				25 mm	5 mm	40	Plain	8 mm	—	—	—	—	63.9 mm	2	Standard	3709N75	00000
				25 mm	5 mm	48	Plain	8 mm	—	—	—	—	76.6 mm	—	Standard	3709N78	000000


				For T10 Trade Size







								Corrosion-Resistant Aluminum

16 mm	10 mm							12	Plain	—	—	—	—	—	38.4 mm	2	Standard	3568N11	00000


16 mm	10 mm							14	Plain	—	—	—	—	—	44.7 mm	2	Standard	3568N12	00000
25 mm	10 mm	12						Plain	—	—	—	—	—	38.4 mm	2	Standard	3568N33	00000
25 mm	10 mm	15	Plain					—	—	—	—	—	47.9 mm	2	Standard	3568N35	00000
25 mm	10 mm	18	Plain					—	—	—	—	—	57.5 mm	2	Standard	3568N37	00000
25 mm	10 mm	19	Plain					—	—	—	—	—	60.6 mm	2	Standard	3568N38	00000
25 mm	10 mm	20	Plain					—	—	—	—	—	63.8 mm	2	Standard	3568N39	00000
25 mm	10 mm	22	Plain					—	—	—	—	—	70.2 mm	2	Standard	3568N41	00000
25 mm	10 mm	24	Plain					—	—	—	—	—	76.6 mm	2	Standard	3568N42	00000
25 mm	10 mm	28	Plain					—	—	—	—	—	89.3 mm	2	Standard	3568N46	00000
25 mm	10 mm	30	Plain					—	—	—	—	—	96.7 mm	2	Standard	3568N47	000000


25 mm	10 mm	36	Plain					—	—	—	—	—	114.8 mm	2	Standard	3568N49	000000
50 mm	10 mm	18	Plain					—	—	—	—	—	57.5 mm	2	Standard	3568N73	00000
50 mm	10 mm	19	Plain					—	—	—	—	—	60.7 mm	2	Standard	3568N74	00000
50 mm	10 mm	24	Plain					—	—	—	—	—	76.6 mm	2	Standard	3568N77	000000
50 mm	10 mm	26	Plain					—	—	—	—	—	82.9 mm	2	Standard	3568N79	000000
50 mm	10 mm	30	Plain					—	—	—	—	—	95.7 mm	2	Standard	3568N83	000000
50 mm	10 mm	32	Plain					—	—	—	—	—	102 mm	2	Standard	3568N84	000000
50 mm	10 mm	36	Plain					—	—	—	—	—	114.8 mm	2	Standard	3568N85	000000
50 mm	10 mm	48	Plain					—	—	—	—	—	153 mm	—	Standard	3568N88	000000


For AT10 Trade Size







								Corrosion-Resistant Aluminum

								16 mm	10 mm	18	Plain	10 mm	—	—	—	—	57.3 mm	2	Standard	3709N801	00000


								16 mm	10 mm	20	Plain	12 mm	—	—	—	—	63.7 mm	2	Standard	3709N802	00000
								16 mm	10 mm	22	Plain	12 mm	—	—	—	—	70 mm	2	Standard	3709N803	00000
								16 mm	10 mm	24	Plain	12 mm	—	—	—	—	76.4 mm	2	Standard	3709N804	00000
								16 mm	10 mm	25	Plain	12 mm	—	—	—	—	79.6 mm	2	Standard	3709N805	00000
								16 mm	10 mm	27	Plain	12 mm	—	—	—	—	86 mm	2	Standard	3709N806	00000
								16 mm	10 mm	30	Plain	12 mm	—	—	—	—	95.5 mm	2	Standard	3709N807	00000
								16 mm	10 mm	32	Plain	12 mm	—	—	—	—	101.9 mm	2	Standard	3709N808	00000
								16 mm	10 mm	36	Plain	16 mm	—	—	—	—	114.6 mm	2	Standard	3709N809	00000
								16 mm	10 mm	40	Plain	16 mm	—	—	—	—	127.3 mm	2	Standard	3709N811	000000
								16 mm	10 mm	44	Plain	16 mm	—	—	—	—	140.1 mm	2	Standard	3709N812	000000


								16 mm	10 mm	48	Plain	16 mm	—	—	—	—	152.8 mm	—	Standard	3709N813	000000
								16 mm	10 mm	60	Plain	16 mm	—	—	—	—	191 mm	—	Standard	3709N814	000000
								25 mm	10 mm	18	Plain	10 mm	—	—	—	—	57.3 mm	2	Standard	1326N51	00000
								25 mm	10 mm	20	Plain	12 mm	—	—	—	—	63.7 mm	2	Standard	1326N52	00000
								25 mm	10 mm	22	Plain	12 mm	—	—	—	—	70 mm	2	Standard	1326N53	00000
				25 mm				10 mm	24	Plain	12 mm	—	—	—	—	76.4 mm	2	Standard	1326N54	00000
				25 mm	10 mm			25	Plain	12 mm	—	—	—	—	79.6 mm	2	Standard	1326N55	00000
				25 mm	10 mm			27	Plain	12 mm	—	—	—	—	86 mm	2	Standard	1326N56	00000
				25 mm	10 mm			30	Plain	12 mm	—	—	—	—	95.5 mm	2	Standard	1326N57	00000
				25 mm	10 mm			32	Plain	12 mm	—	—	—	—	101.9 mm	2	Standard	1326N58	00000


				25 mm	10 mm	36	Plain	16 mm	—	—	—	—	114.6 mm	2	Standard	1326N59	000000
				25 mm	10 mm	40	Plain	16 mm	—	—	—	—	127.3 mm	2	Standard	1326N61	000000
				25 mm	10 mm	44	Plain	16 mm	—	—	—	—	140.1 mm	2	Standard	1326N62	000000
				25 mm	10 mm	48	Plain	16 mm	—	—	—	—	152.8 mm	—	Standard	1326N63	000000
				25 mm	10 mm	60	Plain	16 mm	—	—	—	—	191 mm	—	Standard	1326N64	000000
				50 mm	10 mm	18	Plain	10 mm	—	—	—	—	57.3 mm	2	Standard	3709N815	00000
				50 mm	10 mm	20	Plain	12 mm	—	—	—	—	63.7 mm	2	Standard	3709N816	00000
				50 mm	10 mm	22	Plain	12 mm	—	—	—	—	70 mm	2	Standard	3709N817	00000
				50 mm	10 mm	24	Plain	12 mm	—	—	—	—	76.4 mm	2	Standard	3709N818	000000
				50 mm	10 mm	25	Plain	12 mm	—	—	—	—	79.6 mm	2	Standard	3709N819	000000


				50 mm	10 mm	27	Plain	12 mm	—	—	—	—	86 mm	2	Standard	3709N821	000000
				50 mm	10 mm	30	Plain	12 mm	—	—	—	—	95.5 mm	2	Standard	3709N822	000000
				50 mm	10 mm	32	Plain	12 mm	—	—	—	—	101.9 mm	2	Standard	3709N823	000000
				50 mm	10 mm	36	Plain	16 mm	—	—	—	—	114.6 mm	2	Standard	3709N824	000000
				50 mm	10 mm	40	Plain	16 mm	—	—	—	—	127.3 mm	2	Standard	3709N825	000000
				50 mm	10 mm	44	Plain	16 mm	—	—	—	—	140.1 mm	2	Standard	3709N826	000000
				50 mm	10 mm	48	Plain	16 mm	—	—	—	—	152.8 mm	—	Standard	3709N827	000000
				50 mm	10 mm	60	Plain	16 mm	—	—	—	—	191 mm	—	Standard	3709N828	000000

Bushings

Quick-Disconnect

Bushing

Bushing
Type	Trade No.	For Shaft Dia.		Each
Quick Disconnect (QD)	JA	1/2"	6086K111	000000
Quick Disconnect (QD)	JA	9/16"	6086K118	00000
Quick Disconnect (QD)	JA	5/8"	6086K112	00000
Quick Disconnect (QD)	JA	3/4"	6086K113	00000
Quick Disconnect (QD)	JA	13/16"	6086K119	00000
Quick Disconnect (QD)	JA	7/8"	6086K114	00000
Quick Disconnect (QD)	JA	15/16"	6086K115	00000
Quick Disconnect (QD)	JA	1"	6086K116	00000
Quick Disconnect (QD)	JA	1 1/16"	6086K845	00000
Quick Disconnect (QD)	JA	1 1/8"	6086K846	00000
Quick Disconnect (QD)	JA	1 3/16"	6086K847	00000
Quick Disconnect (QD)	JA	1 1/4"	6086K117	00000
Quick Disconnect (QD)	SH	1/2"	6086K211	00000
Quick Disconnect (QD)	SH	5/8"	6086K212	00000
Quick Disconnect (QD)	SH	11/16"	6086K226	00000
Quick Disconnect (QD)	SH	3/4"	6086K213	00000
Quick Disconnect (QD)	SH	7/8"	6086K214	00000
Quick Disconnect (QD)	SH	15/16"	6086K215	00000
Quick Disconnect (QD)	SH	1"	6086K216	00000
Quick Disconnect (QD)	SH	1 1/16"	6086K217	00000
Quick Disconnect (QD)	SH	1 1/8"	6086K218	00000
Quick Disconnect (QD)	SH	1 3/16"	6086K219	00000
Quick Disconnect (QD)	SH	1 1/4"	6086K221	00000
Quick Disconnect (QD)	SH	1 5/16"	6086K848	00000
Quick Disconnect (QD)	SH	1 3/8"	6086K222	00000
Quick Disconnect (QD)	SH	1 7/16"	6086K849	00000
Quick Disconnect (QD)	SH	1 1/2"	6086K223	00000
Quick Disconnect (QD)	SH	1 5/8"	6086K224	00000
Quick Disconnect (QD)	SH	1 11/16"	6086K225	00000
Quick Disconnect (QD)	SH	22 mm	2344K71	00000
Quick Disconnect (QD)	SH	24 mm	2344K11	00000
Quick Disconnect (QD)	SH	25 mm	2344K12	00000
Quick Disconnect (QD)	SH	28 mm	2344K13	00000
Quick Disconnect (QD)	SH	30 mm	2344K14	00000
Quick Disconnect (QD)	SH	32 mm	2344K15	00000
Quick Disconnect (QD)	SH	35 mm	2344K16	00000
Quick Disconnect (QD)	SDS	1/2"	6086K311	00000
Quick Disconnect (QD)	SDS	9/16"	6086K131	00000
Quick Disconnect (QD)	SDS	5/8"	6086K312	00000
Quick Disconnect (QD)	SDS	3/4"	6086K313	00000
Quick Disconnect (QD)	SDS	7/8"	6086K314	00000
Quick Disconnect (QD)	SDS	15/16"	6086K315	00000
Quick Disconnect (QD)	SDS	1"	6086K316	00000
Quick Disconnect (QD)	SDS	1 1/16"	6086K317	00000
Quick Disconnect (QD)	SDS	1 1/8"	6086K318	00000
Quick Disconnect (QD)	SDS	1 3/16"	6086K319	00000
Quick Disconnect (QD)	SDS	1 1/4"	6086K321	00000
Quick Disconnect (QD)	SDS	1 5/16"	6086K851	00000
Quick Disconnect (QD)	SDS	1 3/8"	6086K322	00000
Quick Disconnect (QD)	SDS	1 7/16"	6086K323	00000
Quick Disconnect (QD)	SDS	1 1/2"	6086K324	00000
Quick Disconnect (QD)	SDS	1 9/16"	6086K132	00000
Quick Disconnect (QD)	SDS	1 5/8"	6086K325	00000
Quick Disconnect (QD)	SDS	1 11/16"	6086K852	00000
Quick Disconnect (QD)	SDS	1 3/4"	6086K326	00000
Quick Disconnect (QD)	SDS	1 7/8"	6086K853	00000
Quick Disconnect (QD)	SDS	1 15/16"	6086K854	00000
Quick Disconnect (QD)	SDS	2"	6086K327	00000
Quick Disconnect (QD)	SDS	24 mm	2344K21	00000
Quick Disconnect (QD)	SDS	25 mm	2344K22	00000
Quick Disconnect (QD)	SDS	28 mm	2344K23	00000
Quick Disconnect (QD)	SDS	30 mm	2344K24	00000
Quick Disconnect (QD)	SDS	32 mm	2344K25	00000
Quick Disconnect (QD)	SDS	35 mm	2344K26	00000
Quick Disconnect (QD)	SDS	38 mm	2344K27	00000
Quick Disconnect (QD)	SDS	40 mm	2344K28	00000
Quick Disconnect (QD)	SDS	42 mm	2344K29	00000
Quick Disconnect (QD)	SD	1/2"	6086K411	00000
Quick Disconnect (QD)	SD	5/8"	6086K412	00000
Quick Disconnect (QD)	SD	3/4"	6086K413	00000
Quick Disconnect (QD)	SD	7/8"	6086K414	00000
Quick Disconnect (QD)	SD	15/16"	6086K415	00000
Quick Disconnect (QD)	SD	1"	6086K416	00000
Quick Disconnect (QD)	SD	1 1/16"	6086K417	00000
Quick Disconnect (QD)	SD	1 1/8"	6086K418	00000
Quick Disconnect (QD)	SD	1 3/16"	6086K419	00000
Quick Disconnect (QD)	SD	1 1/4"	6086K421	00000
Quick Disconnect (QD)	SD	1 5/16"	6086K855	00000
Quick Disconnect (QD)	SD	1 3/8"	6086K422	00000
Quick Disconnect (QD)	SD	1 7/16"	6086K423	00000
Quick Disconnect (QD)	SD	1 1/2"	6086K424	00000
Quick Disconnect (QD)	SD	1 5/8"	6086K425	00000
Quick Disconnect (QD)	SD	1 11/16"	6086K856	00000
Quick Disconnect (QD)	SD	1 3/4"	6086K426	00000
Quick Disconnect (QD)	SD	1 7/8"	6086K857	00000
Quick Disconnect (QD)	SD	1 15/16"	6086K429	00000
Quick Disconnect (QD)	SD	2"	6086K427	00000
Quick Disconnect (QD)	SD	24 mm	2344K31	00000
Quick Disconnect (QD)	SD	25 mm	2344K32	00000
Quick Disconnect (QD)	SD	28 mm	2344K33	00000
Quick Disconnect (QD)	SD	30 mm	2344K34	00000
Quick Disconnect (QD)	SD	32 mm	2344K35	00000
Quick Disconnect (QD)	SD	35 mm	2344K36	00000
Quick Disconnect (QD)	SD	38 mm	2344K37	00000
Quick Disconnect (QD)	SD	40 mm	2344K38	00000
Quick Disconnect (QD)	SD	42 mm	2344K39	00000
Quick Disconnect (QD)	SK	1/2"	6086K511	00000
Quick Disconnect (QD)	SK	5/8"	6086K512	00000
Quick Disconnect (QD)	SK	3/4"	6086K513	00000
Quick Disconnect (QD)	SK	7/8"	6086K514	00000
Quick Disconnect (QD)	SK	15/16"	6086K515	00000
Quick Disconnect (QD)	SK	1"	6086K516	00000
Quick Disconnect (QD)	SK	1 1/16"	6086K517	00000
Quick Disconnect (QD)	SK	1 1/8"	6086K518	00000
Quick Disconnect (QD)	SK	1 3/16"	6086K519	00000
Quick Disconnect (QD)	SK	1 1/4"	6086K521	00000
Quick Disconnect (QD)	SK	1 5/16"	6086K533	00000
Quick Disconnect (QD)	SK	1 3/8"	6086K522	00000
Quick Disconnect (QD)	SK	1 7/16"	6086K523	00000
Quick Disconnect (QD)	SK	1 1/2"	6086K524	00000
Quick Disconnect (QD)	SK	1 9/16"	6086K536	00000
Quick Disconnect (QD)	SK	1 5/8"	6086K525	00000
Quick Disconnect (QD)	SK	1 11/16"	6086K526	00000
Quick Disconnect (QD)	SK	1 3/4"	6086K527	00000
Quick Disconnect (QD)	SK	1 7/8"	6086K528	00000
Quick Disconnect (QD)	SK	1 15/16"	6086K529	00000
Quick Disconnect (QD)	SK	2"	6086K531	00000
Quick Disconnect (QD)	SK	2 1/8"	6086K532	00000
Quick Disconnect (QD)	SK	2 3/16"	6086K858	00000
Quick Disconnect (QD)	SK	2 1/4"	6086K859	00000
Quick Disconnect (QD)	SK	2 3/8"	6086K861	00000
Quick Disconnect (QD)	SK	2 7/16"	6086K862	00000
Quick Disconnect (QD)	SK	2 1/2"	6086K534	00000
Quick Disconnect (QD)	SK	2 5/8"	6086K535	00000
Quick Disconnect (QD)	SK	24 mm	2344K41	00000
Quick Disconnect (QD)	SK	25 mm	2344K42	00000
Quick Disconnect (QD)	SK	28 mm	2344K43	00000
Quick Disconnect (QD)	SK	30 mm	2344K44	00000
Quick Disconnect (QD)	SK	32 mm	2344K45	00000
Quick Disconnect (QD)	SK	35 mm	2344K46	00000
Quick Disconnect (QD)	SK	38 mm	2344K47	00000
Quick Disconnect (QD)	SK	40 mm	2344K48	00000
Quick Disconnect (QD)	SK	42 mm	2344K72	00000
Quick Disconnect (QD)	SK	48 mm	2344K49	00000
Quick Disconnect (QD)	SK	50 mm	2344K51	00000
Quick Disconnect (QD)	SK	55 mm	2344K52	00000
Quick Disconnect (QD)	SF	1/2"	6086K614	00000
Quick Disconnect (QD)	SF	5/8"	6086K615	00000
Quick Disconnect (QD)	SF	3/4"	6086K616	00000
Quick Disconnect (QD)	SF	7/8"	6086K617	00000
Quick Disconnect (QD)	SF	1"	6086K619	00000
Quick Disconnect (QD)	SF	1 1/8"	6086K622	00000
Quick Disconnect (QD)	SF	1 3/16"	6086K623	00000
Quick Disconnect (QD)	SF	1 1/4"	6086K624	00000
Quick Disconnect (QD)	SF	1 3/8"	6086K625	00000
Quick Disconnect (QD)	SF	1 7/16"	6086K626	00000
Quick Disconnect (QD)	SF	1 1/2"	6086K627	00000
Quick Disconnect (QD)	SF	1 5/8"	6086K628	00000
Quick Disconnect (QD)	SF	1 11/16"	6086K629	00000
Quick Disconnect (QD)	SF	1 3/4"	6086K631	00000
Quick Disconnect (QD)	SF	1 7/8"	6086K632	00000
Quick Disconnect (QD)	SF	1 15/16"	6086K633	00000
Quick Disconnect (QD)	SF	2"	6086K634	00000
Quick Disconnect (QD)	SF	2 1/8"	6086K635	00000
Quick Disconnect (QD)	SF	2 3/16"	6086K636	00000
Quick Disconnect (QD)	SF	2 1/4"	6086K637	00000
Quick Disconnect (QD)	SF	2 3/8"	6086K864	00000
Quick Disconnect (QD)	SF	2 7/16"	6086K865	00000
Quick Disconnect (QD)	SF	2 1/2"	6086K638	00000
Quick Disconnect (QD)	SF	2 5/8"	6086K866	00000
Quick Disconnect (QD)	SF	2 3/4"	6086K867	00000
Quick Disconnect (QD)	SF	2 15/16"	6086K639	00000
Quick Disconnect (QD)	SF	30 mm	2344K75	00000
Quick Disconnect (QD)	SF	35 mm	2344K62	00000
Quick Disconnect (QD)	SF	40 mm	2344K64	00000
Quick Disconnect (QD)	SF	50 mm	2344K67	00000
Quick Disconnect (QD)	SF	55 mm	2344K68	00000
Quick Disconnect (QD)	SF	60 mm	2344K69	00000
Quick Disconnect (QD)	E	35 mm	2344K82	000000
Quick Disconnect (QD)	E	65 mm	2344K92	000000
Quick Disconnect (QD)	E	75 mm	2344K94	000000

High-Torque HTD Timing Belt Pulleys


Finished Bore	Plain Bore

Bushing Bore

Curved teeth engage with the matching belt better than standard trapezoidal teeth, so these pulleys transmit about twice the torque. All are compatible with Gates PowerGrip HTD, Omega HP, and Carlisle RPP series.

Steel and Iron—Strong but best for dry environments since moisture will cause them to rust.

Corrosion-Resistant Aluminum—Won't rust in wet environments and one-third the weight of steel and iron. However, aluminum pulleys are not as strong as iron and steel.

Corrosion-Resistant Stainless Steel—Stands up to wet environments and mild chemicals, such as the ammonia in cleaning solutions.

Finished Bore—Mount these pulleys onto the shaft and secure with a set screw—no machining required.

Plain Bore—Do it your way—machine the bore to your exact shaft size or add a set screw or keyway.

						For Bushing
	For Max. Belt Wd., mm	Pitch, mm	No. of Teeth	Bore Type	For Shaft Dia.	Type	Trade No.	Pitch Dia., mm	No. of Flanges	Hub Type		Each
For H3M Trade Size







				Corrosion-Resistant Aluminum

				6	3	16	Finished	3/16"	—	—	15.3	2	Standard	6497K251	000000


				6	3	18	Finished	1/4"	—	—	17.2	2	Standard	6497K252	00000
				6	3	20	Finished	1/4"	—	—	19.1	2	Standard	6497K253	00000
				6	3	24	Finished	1/4"	—	—	22.9	2	Standard	6497K254	00000
				6	3	28	Finished	1/4"	—	—	26.8	2	Standard	6497K255	00000
				6	3	32	Finished	1/4"	—	—	30.6	2	Standard	6497K256	00000
				6	3	36	Finished	1/4"	—	—	34.4	2	Standard	6497K257	00000
				6	3	40	Finished	1/4"	—	—	38.2	2	Standard	6497K258	00000
				9	3	16	Finished	3/16"	—	—	15.3	2	Standard	6497K259	00000
				9	3	18	Finished	1/4"	—	—	17.2	2	Standard	6497K261	00000
				9	3	20	Finished	1/4"	—	—	19.1	2	Standard	6497K262	00000


				9	3	24	Finished	1/4"	—	—	22.9	2	Standard	6497K263	00000
				9	3	28	Finished	1/4"	—	—	26.8	2	Standard	6497K264	00000
				9	3	32	Finished	1/4"	—	—	30.6	2	Standard	6497K265	00000
				9	3	36	Finished	1/4"	—	—	34.4	2	Standard	6497K266	00000
				9	3	40	Finished	1/4"	—	—	38.2	2	Standard	6497K267	00000


				For H5M Trade Size







								Iron

								15	5	32	Plain	1/2"	—	—	50.9	2	Standard	6497K81	00000


								15	5	34	Plain	1/2"	—	—	54.1	2	Standard	6497K82	00000
								15	5	36	Plain	1/2"	—	—	57.3	2	Standard	6497K83	00000
								15	5	40	Bushing	—	Quick Disconnect (QD)	JA	63.7	2	—	6497K84	00000
								15	5	56	Bushing	—	Quick Disconnect (QD)	SH	89.1	2	—	6497K85	00000




										Corrosion-Resistant Aluminum

										9	5	16	Finished	1/4"	—	—	25.5	2	Standard	6497K268	00000


										9	5	18	Finished	1/4"	—	—	28.7	2	Standard	6497K269	00000
										9	5	20	Finished	1/4"	—	—	31.8	2	Standard	6497K271	00000
										9	5	24	Finished	1/4"	—	—	38.2	2	Standard	6497K272	00000
										9	5	28	Finished	1/4"	—	—	44.6	2	Standard	6497K273	00000
										9	5	32	Finished	1/4"	—	—	50.9	2	Standard	6497K274	00000
										9	5	36	Finished	5/16"	—	—	57.3	—	Standard	6497K275	00000
										9	5	40	Finished	5/16"	—	—	63.7	—	Standard	6497K276	00000




										Corrosion-Resistant Stainless Steel

		15	5							32	Plain	1/2"	—	—	49.8	2	Standard	1230N11	000000


		15	5							34	Plain	1/2"	—	—	53	2	Standard	1230N12	000000
		15	5							36	Plain	1/2"	—	—	56.2	2	Standard	1230N13	000000
		15	5							40	Bushing	—	Quick Disconnect (QD)	JA	62.5	2	—	1230N14	000000


		For H8M Trade Size







												Steel

												12	8	26	Bushing	—	Quick Disconnect (QD)	JA	66.2	2	—	6497K277	000000


												12	8	28	Bushing	—	Split Tapered	H	71.3	2	—	6497K279	000000
												12	8	30	Bushing	—	Split Tapered	H	76.4	2	—	6497K282	000000
												12	8	32	Bushing	—	Split Tapered	H	81.5	2	—	6497K284	000000
												22	8	26	Bushing	—	Quick Disconnect (QD)	JA	66.2	2	—	6497K278	000000
												22	8	28	Bushing	—	Split Tapered	H	71.3	2	—	6497K281	000000
												22	8	30	Bushing	—	Split Tapered	H	76.4	2	—	6497K283	000000
				22								8	32	Bushing	—	Split Tapered	H	81.5	2	—	6497K285	000000




						Iron

						20	8					22	Plain	1/2"	—	—	56	2	Standard	6497K111	00000


						20	8					26	Bushing	—	Quick Disconnect (QD)	JA	66.2	2	—	6497K113	00000
						20	8					28	Bushing	—	Split Tapered	H	71.3	2	—	6497K711	00000
						20	8					30	Bushing	—	Split Tapered	H	76.4	2	—	6497K712	00000
						20	8					34	Bushing	—	Quick Disconnect (QD)	SH	86.6	2	—	6497K117	00000
						20	8					40	Bushing	—	Quick Disconnect (QD)	SH	101.9	2	—	6497K12	00000
						20	8					44	Bushing	—	Quick Disconnect (QD)	SDS	112	2	—	6497K121	00000
						20	8					48	Bushing	—	Quick Disconnect (QD)	SDS	122.2	2	—	6497K122	000000
						20	8					56	Bushing	—	Quick Disconnect (QD)	SDS	142.6	2	—	6497K123	000000
						30	8					22	Plain	1/2"	—	—	56	2	Standard	6497K211	00000
						30	8	24				Plain	1/2"	—	—	61.1	2	Standard	6497K212	00000


						30	8	26	Plain			1/2"	—	—	66.2	2	Standard	6497K213	00000
						30	8	28	Bushing			—	Split Tapered	H	71.3	2	—	6497K714	00000
						30	8	30	Bushing			—	Split Tapered	H	76.4	2	—	6497K715	00000
						30	8	32	Bushing			—	Split Tapered	H	81.5	2	—	6497K716	00000
						30	8	34	Bushing			—	Quick Disconnect (QD)	SH	86.6	2	—	6497K217	00000
						30	8	40	Bushing			—	Quick Disconnect (QD)	SH	101.9	2	—	6497K22	00000
						30	8	44	Bushing			—	Quick Disconnect (QD)	SDS	112	2	—	6497K221	00000
						30	8	48	Bushing			—	Quick Disconnect (QD)	SDS	122.2	2	—	6497K222	000000
						30	8	56	Bushing			—	Quick Disconnect (QD)	SDS	142.6	2	—	6497K223	000000
						50	8	34	Bushing			—	Quick Disconnect (QD)	SH	86.6	2	—	6497K33	000000


50	8					36	Bushing	—	Quick Disconnect (QD)			SH	91.7	2	—	6497K34	000000
50	8					40	Bushing	—	Quick Disconnect (QD)			SH	101.9	2	—	6497K35	000000




						Corrosion-Resistant Stainless Steel

						20	8	22	Plain			1/2"	—	—	54.7	2	Standard	1230N15	000000


						20	8	26	Bushing			—	Quick Disconnect (QD)	JA	62.2	2	—	1230N16	000000
		20				8	28	Bushing	—			Split Tapered	H	71.3	2	—	1230N17	000000
		20	8			30	Bushing	—	Split Tapered			H	76.4	2	—	1230N18	000000
		20	8			34	Bushing	—	Quick Disconnect (QD)			SH	86.6	2	—	1230N19	000000
		20	8			40	Bushing	—	Quick Disconnect (QD)			SH	101.9	2	—	1230N2	000000
		20	8			44	Bushing	—	Quick Disconnect (QD)			SDS	112	2	—	1230N21	000000
		20	8			48	Bushing	—	Quick Disconnect (QD)			SDS	122.2	2	—	1230N22	000000
		20	8			56	Bushing	—	Quick Disconnect (QD)			SDS	141.2	2	—	1230N23	000000
		30	8			22	Plain	1/2"	—	—		54.7	2	Standard	1230N24	000000
		30	8			24	Plain	1/2"	—	—	59.7	2	Standard	1230N25	000000


		30	8			26	Plain	1/2"	—	—	64.8	2	Standard	1230N26	000000
		30	8			28	Bushing	—	Split Tapered	H	71.3	2	—	1230N27	000000
		30	8			30	Bushing	—	Split Tapered	H	76.4	2	—	1230N28	000000
		30	8			32	Bushing	—	Split Tapered	H	81.5	2	—	1230N29	000000
		30	8			34	Bushing	—	Quick Disconnect (QD)	SH	86.6	2	—	1230N3	000000
		30	8			40	Bushing	—	Quick Disconnect (QD)	SH	101.9	2	—	1230N31	000000
		30	8			44	Bushing	—	Quick Disconnect (QD)	SDS	112	2	—	1230N32	000000
		30	8			48	Bushing	—	Quick Disconnect (QD)	SDS	122.2	2	—	1230N33	000000
		30	8			56	Bushing	—	Quick Disconnect (QD)	SDS	142.6	2	—	1230N34	000000
		50	8			34	Bushing	—	Quick Disconnect (QD)	SH	86.6	2	—	1230N35	000000


		50	8	36	Bushing	—	Quick Disconnect (QD)	SH	91.7	2	—	1230N36	000000
		50	8	40	Bushing	—	Quick Disconnect (QD)	SH	101.9	2	—	1230N37	000000


		For H14M Trade Size







						Steel

						20	14	28	Bushing	—	Quick Disconnect (QD)	SK	124.8	2	—	6497K286	000000


						20	14	30	Bushing	—	Quick Disconnect (QD)	SK	133.7	2	—	6497K287	000000
						20	14	32	Bushing	—	Quick Disconnect (QD)	SK	142.6	2	—	6497K288	000000

Bushings

Quick-Disconnect

Bushing

Split-Tapered

Bushing

Bushing
Type	Trade No.	For Shaft Dia.		Each
Quick Disconnect (QD)	JA	1/2"	6086K111	000000
Quick Disconnect (QD)	JA	9/16"	6086K118	00000
Quick Disconnect (QD)	JA	5/8"	6086K112	00000
Quick Disconnect (QD)	JA	3/4"	6086K113	00000
Quick Disconnect (QD)	JA	13/16"	6086K119	00000
Quick Disconnect (QD)	JA	7/8"	6086K114	00000
Quick Disconnect (QD)	JA	15/16"	6086K115	00000
Quick Disconnect (QD)	JA	1"	6086K116	00000
Quick Disconnect (QD)	JA	1 1/16"	6086K845	00000
Quick Disconnect (QD)	JA	1 1/8"	6086K846	00000
Quick Disconnect (QD)	JA	1 3/16"	6086K847	00000
Quick Disconnect (QD)	JA	1 1/4"	6086K117	00000
Quick Disconnect (QD)	SH	1/2"	6086K211	00000
Quick Disconnect (QD)	SH	5/8"	6086K212	00000
Quick Disconnect (QD)	SH	11/16"	6086K226	00000
Quick Disconnect (QD)	SH	3/4"	6086K213	00000
Quick Disconnect (QD)	SH	7/8"	6086K214	00000
Quick Disconnect (QD)	SH	15/16"	6086K215	00000
Quick Disconnect (QD)	SH	1"	6086K216	00000
Quick Disconnect (QD)	SH	1 1/16"	6086K217	00000
Quick Disconnect (QD)	SH	1 1/8"	6086K218	00000
Quick Disconnect (QD)	SH	1 3/16"	6086K219	00000
Quick Disconnect (QD)	SH	1 1/4"	6086K221	00000
Quick Disconnect (QD)	SH	1 5/16"	6086K848	00000
Quick Disconnect (QD)	SH	1 3/8"	6086K222	00000
Quick Disconnect (QD)	SH	1 7/16"	6086K849	00000
Quick Disconnect (QD)	SH	1 1/2"	6086K223	00000
Quick Disconnect (QD)	SH	1 5/8"	6086K224	00000
Quick Disconnect (QD)	SH	1 11/16"	6086K225	00000
Quick Disconnect (QD)	SH	22 mm	2344K71	00000
Quick Disconnect (QD)	SH	24 mm	2344K11	00000
Quick Disconnect (QD)	SH	25 mm	2344K12	00000
Quick Disconnect (QD)	SH	28 mm	2344K13	00000
Quick Disconnect (QD)	SH	30 mm	2344K14	00000
Quick Disconnect (QD)	SH	32 mm	2344K15	00000
Quick Disconnect (QD)	SH	35 mm	2344K16	00000
Quick Disconnect (QD)	SDS	1/2"	6086K311	00000
Quick Disconnect (QD)	SDS	9/16"	6086K131	00000
Quick Disconnect (QD)	SDS	5/8"	6086K312	00000
Quick Disconnect (QD)	SDS	3/4"	6086K313	00000
Quick Disconnect (QD)	SDS	7/8"	6086K314	00000
Quick Disconnect (QD)	SDS	15/16"	6086K315	00000
Quick Disconnect (QD)	SDS	1"	6086K316	00000
Quick Disconnect (QD)	SDS	1 1/16"	6086K317	00000
Quick Disconnect (QD)	SDS	1 1/8"	6086K318	00000
Quick Disconnect (QD)	SDS	1 3/16"	6086K319	00000
Quick Disconnect (QD)	SDS	1 1/4"	6086K321	00000
Quick Disconnect (QD)	SDS	1 5/16"	6086K851	00000
Quick Disconnect (QD)	SDS	1 3/8"	6086K322	00000
Quick Disconnect (QD)	SDS	1 7/16"	6086K323	00000
Quick Disconnect (QD)	SDS	1 1/2"	6086K324	00000
Quick Disconnect (QD)	SDS	1 9/16"	6086K132	00000
Quick Disconnect (QD)	SDS	1 5/8"	6086K325	00000
Quick Disconnect (QD)	SDS	1 11/16"	6086K852	00000
Quick Disconnect (QD)	SDS	1 3/4"	6086K326	00000
Quick Disconnect (QD)	SDS	1 7/8"	6086K853	00000
Quick Disconnect (QD)	SDS	1 15/16"	6086K854	00000
Quick Disconnect (QD)	SDS	2"	6086K327	00000
Quick Disconnect (QD)	SDS	24 mm	2344K21	00000
Quick Disconnect (QD)	SDS	25 mm	2344K22	00000
Quick Disconnect (QD)	SDS	28 mm	2344K23	00000
Quick Disconnect (QD)	SDS	30 mm	2344K24	00000
Quick Disconnect (QD)	SDS	32 mm	2344K25	00000
Quick Disconnect (QD)	SDS	35 mm	2344K26	00000
Quick Disconnect (QD)	SDS	38 mm	2344K27	00000
Quick Disconnect (QD)	SDS	40 mm	2344K28	00000
Quick Disconnect (QD)	SDS	42 mm	2344K29	00000
Quick Disconnect (QD)	SK	1/2"	6086K511	00000
Quick Disconnect (QD)	SK	5/8"	6086K512	00000
Quick Disconnect (QD)	SK	3/4"	6086K513	00000
Quick Disconnect (QD)	SK	7/8"	6086K514	00000
Quick Disconnect (QD)	SK	15/16"	6086K515	00000
Quick Disconnect (QD)	SK	1"	6086K516	00000
Quick Disconnect (QD)	SK	1 1/16"	6086K517	00000
Quick Disconnect (QD)	SK	1 1/8"	6086K518	00000
Quick Disconnect (QD)	SK	1 3/16"	6086K519	00000
Quick Disconnect (QD)	SK	1 1/4"	6086K521	00000
Quick Disconnect (QD)	SK	1 5/16"	6086K533	00000
Quick Disconnect (QD)	SK	1 3/8"	6086K522	00000
Quick Disconnect (QD)	SK	1 7/16"	6086K523	00000
Quick Disconnect (QD)	SK	1 1/2"	6086K524	00000
Quick Disconnect (QD)	SK	1 9/16"	6086K536	00000
Quick Disconnect (QD)	SK	1 5/8"	6086K525	00000
Quick Disconnect (QD)	SK	1 11/16"	6086K526	00000
Quick Disconnect (QD)	SK	1 3/4"	6086K527	00000
Quick Disconnect (QD)	SK	1 7/8"	6086K528	00000
Quick Disconnect (QD)	SK	1 15/16"	6086K529	00000
Quick Disconnect (QD)	SK	2"	6086K531	00000
Quick Disconnect (QD)	SK	2 1/8"	6086K532	00000
Quick Disconnect (QD)	SK	2 3/16"	6086K858	00000
Quick Disconnect (QD)	SK	2 1/4"	6086K859	00000
Quick Disconnect (QD)	SK	2 3/8"	6086K861	00000
Quick Disconnect (QD)	SK	2 7/16"	6086K862	00000
Quick Disconnect (QD)	SK	2 1/2"	6086K534	00000
Quick Disconnect (QD)	SK	2 5/8"	6086K535	00000
Quick Disconnect (QD)	SK	24 mm	2344K41	00000
Quick Disconnect (QD)	SK	25 mm	2344K42	00000
Quick Disconnect (QD)	SK	28 mm	2344K43	00000
Quick Disconnect (QD)	SK	30 mm	2344K44	00000
Quick Disconnect (QD)	SK	32 mm	2344K45	00000
Quick Disconnect (QD)	SK	35 mm	2344K46	00000
Quick Disconnect (QD)	SK	38 mm	2344K47	00000
Quick Disconnect (QD)	SK	40 mm	2344K48	00000
Quick Disconnect (QD)	SK	42 mm	2344K72	00000
Quick Disconnect (QD)	SK	48 mm	2344K49	00000
Quick Disconnect (QD)	SK	50 mm	2344K51	00000
Quick Disconnect (QD)	SK	55 mm	2344K52	00000
Split Tapered	H	3/8"	6086K191	00000
Split Tapered	H	1/2"	6086K192	00000
Split Tapered	H	5/8"	6086K197	00000
Split Tapered	H	3/4"	6086K193	00000
Split Tapered	H	7/8"	6086K198	00000
Split Tapered	H	1"	6086K194	00000
Split Tapered	H	1 1/8"	6086K199	00000
Split Tapered	H	1 3/16"	6086K227	00000
Split Tapered	H	1 1/4"	6086K195	00000
Split Tapered	H	1 3/8"	6086K229	00000
Split Tapered	H	1 7/16"	6086K228	00000
Split Tapered	H	1 1/2"	6086K196	00000
Split Tapered	H	10 mm	9859T711	00000
Split Tapered	H	12 mm	9859T713	00000
Split Tapered	H	14 mm	9859T714	00000
Split Tapered	H	16 mm	9859T715	00000
Split Tapered	H	18 mm	9859T716	00000
Split Tapered	H	19 mm	9859T717	00000
Split Tapered	H	20 mm	9859T718	00000
Split Tapered	H	22 mm	9859T719	00000
Split Tapered	H	24 mm	9859T721	00000
Split Tapered	H	25 mm	9859T722	00000
Split Tapered	H	28 mm	9859T723	00000
Split Tapered	H	30 mm	9859T724	00000
Split Tapered	H	32 mm	9859T725	00000
Split Tapered	H	35 mm	9859T726	00000
Split Tapered	H	38 mm	9859T728	00000

Precision High-Torque GT Timing Belt Pulleys

Finished Bore

Bushing Bore

When precise synchronization is crucial, these pulleys minimize play (backlash). They’re often found in 3D printers, where accurate positioning is essential. Their curved teeth fit snugly with matching belts. Compared to pulleys with standard trapezoidal teeth, these pulleys transmit about three times more torque and run at higher speeds. All are compatible with Gates PowerGrip GT, 2GT, GT2, GT3, and GT4 series.

Iron—Strong but best for dry environments since moisture will cause them to rust.

Corrosion-Resistant Aluminum—Won't rust in wet environments and one-third the weight of steel and iron. However, aluminum pulleys are not as strong as iron and steel.

Finished Bore—Mount these pulleys onto the shaft and secure with a set screw—no machining required.

						For Bushing
	For Max. Belt Wd., mm	Pitch, mm	No. of Teeth	Bore Type	For Shaft Dia.	Type	Trade No.	Pitch Dia., mm	No. of Flanges	Hub Type		Each
For 2MGT Trade Size







				Corrosion-Resistant Aluminum

				6	2	12	Finished	1/8"	—	—	7.6	1	Standard	3764N101	000000


				6	2	14	Finished	1/8"	—	—	8.9	1	Standard	3764N102	00000
				6	2	15	Finished	3/16"	—	—	9.6	1	Standard	3764N103	00000
				6	2	16	Finished	3/16"	—	—	10.2	1	Standard	3764N104	00000
				6	2	16	Finished	5 mm	—	—	9.7	1	Standard	3684N11	0000
				6	2	17	Finished	1/4"	—	—	10.8	1	Standard	3764N105	00000
				6	2	18	Finished	1/4"	—	—	11.5	1	Standard	3764N106	00000
				6	2	20	Finished	1/4"	—	—	12.7	1	Standard	3764N107	00000
				6	2	20	Finished	5 mm	—	—	12.2	1	Standard	3684N12	0000
				6	2	24	Finished	1/4"	—	—	15.3	2	Standard	3764N108	00000
				6	2	26	Finished	1/4"	—	—	16.6	2	Standard	3764N109	00000


				6	2	28	Finished	1/4"	—	—	17.8	2	Standard	3764N11	00000
				6	2	32	Finished	1/4"	—	—	20.4	2	Standard	3764N112	00000
				6	2	36	Finished	1/4"	—	—	22.9	2	Standard	3764N113	00000
				6	2	40	Finished	1/4"	—	—	25.5	2	Standard	3764N114	00000
				6	2	48	Finished	1/4"	—	—	30.6	2	Standard	3764N116	00000
				6	2	50	Finished	1/4"	—	—	31.8	2	Standard	3764N117	00000
				6	2	60	Finished	1/4"	—	—	38.2	2	Standard	3764N118	00000
				6	2	72	Finished	1/4"	—	—	45.8	—	Standard	3764N119	00000
				6	2	100	Finished	5/16"	—	—	63.7	—	Standard	3764N122	00000
				6	2	120	Finished	3/8"	—	—	76.4	—	Standard	3764N123	00000


				9	2	20	Finished	5 mm	—	—	12.2	1	Standard	3684N13	0000
				12	2	20	Finished	5 mm	—	—	12.2	1	Standard	3684N14	0000


				For 3MGT Trade Size







								Corrosion-Resistant Aluminum

								9	3	16	Finished	3/16"	—	—	15.3	1	Standard	3764N124	00000


								9	3	16	Finished	1/4"	—	—	15.3	1	Standard	3764N125	00000
								9	3	17	Finished	1/4"	—	—	16.2	1	Standard	3764N126	00000
								9	3	18	Finished	1/4"	—	—	17.2	2	Standard	3764N127	00000
								9	3	20	Finished	1/4"	—	—	19.1	2	Standard	3764N128	00000
								9	3	22	Finished	1/4"	—	—	21	2	Standard	3764N129	00000
								9	3	24	Finished	1/4"	—	—	22.9	2	Standard	3764N13	00000
								9	3	25	Finished	1/4"	—	—	23.9	2	Standard	3764N131	00000
								9	3	26	Finished	1/4"	—	—	24.8	2	Standard	3764N132	00000
								9	3	28	Finished	1/4"	—	—	26.7	2	Standard	3764N133	00000
								9	3	30	Finished	1/4"	—	—	28.7	2	Standard	3764N134	00000


9	3							32	Finished	1/4"	—	—	30.6	2	Standard	3764N135	00000
9	3							34	Finished	1/4"	—	—	32.5	2	Standard	3764N136	00000
9	3							36	Finished	1/4"	—	—	34.4	2	Standard	3764N137	00000
9	3							40	Finished	1/4"	—	—	38.2	2	Standard	3764N139	00000
9	3	44						Finished	1/4"	—	—	42	2	Standard	3764N14	00000
9	3	45	Finished					1/4"	—	—	43	2	Standard	3764N141	00000
9	3	48	Finished					5/16"	—	—	45.8	—	Standard	3764N142	00000
9	3	50	Finished					5/16"	—	—	47.8	—	Standard	3764N143	00000
9	3	56	Finished					5/16"	—	—	53.5	—	Standard	3764N144	00000
9	3	60	Finished					5/16"	—	—	57.3	—	Standard	3764N145	00000


9	3	72	Finished					5/16"	—	—	68.8	—	Standard	3764N147	00000
9	3	80	Finished					5/16"	—	—	76.4	—	Standard	3764N148	00000
9	3	90	Finished					5/16"	—	—	86	—	Standard	3764N149	00000
9	3	100	Finished					5/16"	—	—	95.5	—	Standard	3764N15	00000
9	3	120	Finished					5/16"	—	—	114.6	—	Standard	3764N151	00000


For 14MGT Trade Size







								Iron

								40	14	28	Bushing	—	Taper Lock	2012	124.8	2	—	3764N152	000000


								40	14	46	Bushing	—	Taper Lock	2517	205	2	—	3764N167	000000
								40	14	72	Bushing	—	Taper Lock	3020	320.9	2	—	3764N175	000000

Bushings

Taper-Lock

Bushing

Bushing
Type	Trade No.	For Shaft Dia.		Each
Taper Lock	2012	1/2"	57095K181	000000
Taper Lock	2012	5/8"	57095K294	00000
Taper Lock	2012	3/4"	57095K182	00000
Taper Lock	2012	7/8"	57095K295	00000
Taper Lock	2012	15/16"	57095K545	00000
Taper Lock	2012	1"	57095K183	00000
Taper Lock	2012	1 1/8"	57095K184	00000
Taper Lock	2012	1 3/16"	57095K199	00000
Taper Lock	2012	1 1/4"	57095K185	00000
Taper Lock	2012	1 3/8"	57095K186	00000
Taper Lock	2012	1 7/16"	57095K187	00000
Taper Lock	2012	1 1/2"	57095K188	00000
Taper Lock	2012	1 9/16"	57095K542	00000
Taper Lock	2012	1 5/8"	57095K189	00000
Taper Lock	2012	1 11/16"	57095K538	00000
Taper Lock	2012	1 3/4"	57095K191	00000
Taper Lock	2012	1 7/8"	57095K192	00000
Taper Lock	2012	1 15/16"	57095K313	00000
Taper Lock	2012	2"	57095K193	00000
Taper Lock	2012	2 1/8"	57095K196	000000
Taper Lock	2012	20 mm	57095K548	00000
Taper Lock	2012	22 mm	57095K549	00000
Taper Lock	2012	24 mm	57095K551	00000
Taper Lock	2012	25 mm	57095K552	00000
Taper Lock	2012	28 mm	57095K553	00000
Taper Lock	2012	30 mm	57095K554	00000
Taper Lock	2012	32 mm	57095K555	00000
Taper Lock	2012	35 mm	57095K556	00000
Taper Lock	2012	38 mm	57095K557	00000
Taper Lock	2012	40 mm	57095K558	00000
Taper Lock	2012	42 mm	57095K559	00000
Taper Lock	2012	45 mm	57095K561	00000
Taper Lock	2012	50 mm	57095K563	00000
Taper Lock	2517	3/4"	57095K224	00000
Taper Lock	2517	7/8"	57095K225	00000
Taper Lock	2517	1"	57095K211	00000
Taper Lock	2517	1 1/8"	57095K226	00000
Taper Lock	2517	1 3/16"	57095K232	00000
Taper Lock	2517	1 1/4"	57095K227	00000
Taper Lock	2517	1 5/16"	57095K233	00000
Taper Lock	2517	1 3/8"	57095K212	00000
Taper Lock	2517	1 7/16"	57095K234	00000
Taper Lock	2517	1 1/2"	57095K213	00000
Taper Lock	2517	1 5/8"	57095K214	00000
Taper Lock	2517	1 11/16"	57095K235	00000
Taper Lock	2517	1 3/4"	57095K215	00000
Taper Lock	2517	1 13/16"	57095K566	00000
Taper Lock	2517	1 7/8"	57095K228	00000
Taper Lock	2517	1 15/16"	57095K236	00000
Taper Lock	2517	2"	57095K216	00000
Taper Lock	2517	2 1/8"	57095K217	00000
Taper Lock	2517	2 3/16"	57095K237	00000
Taper Lock	2517	2 1/4"	57095K218	00000
Taper Lock	2517	2 3/8"	57095K219	00000
Taper Lock	2517	2 7/16"	57095K238	00000
Taper Lock	2517	2 1/2"	57095K221	00000
Taper Lock	2517	2 5/8"	57095K229	000000
Taper Lock	2517	2 11/16"	57095K231	000000
Taper Lock	2517	24 mm	57095K578	00000
Taper Lock	2517	25 mm	57095K579	00000
Taper Lock	2517	30 mm	57095K582	00000
Taper Lock	2517	32 mm	57095K583	00000
Taper Lock	2517	35 mm	57095K584	00000
Taper Lock	2517	38 mm	57095K585	00000
Taper Lock	2517	40 mm	57095K586	00000
Taper Lock	2517	42 mm	57095K587	00000
Taper Lock	2517	45 mm	57095K588	00000
Taper Lock	2517	48 mm	57095K589	00000
Taper Lock	2517	50 mm	57095K591	00000
Taper Lock	3020	1"	57095K314	000000
Taper Lock	3020	1 1/8"	57095K318	000000
Taper Lock	3020	1 1/4"	57095K317	000000
Taper Lock	3020	1 3/8"	57095K325	000000
Taper Lock	3020	1 7/16"	57095K328	000000
Taper Lock	3020	1 1/2"	57095K316	000000
Taper Lock	3020	1 5/8"	57095K327	000000
Taper Lock	3020	1 3/4"	57095K324	000000
Taper Lock	3020	1 7/8"	57095K329	000000
Taper Lock	3020	1 15/16"	57095K322	000000
Taper Lock	3020	2"	57095K333	000000
Taper Lock	3020	2 1/8"	57095K337	000000
Taper Lock	3020	2 3/8"	57095K344	000000
Taper Lock	3020	2 7/16"	57095K347	000000
Taper Lock	3020	2 1/2"	57095K335	000000
Taper Lock	3020	2 3/4"	57095K343	000000
Taper Lock	3020	2 7/8"	57095K348	000000
Taper Lock	3020	2 15/16"	57095K341	000000
Taper Lock	3020	3"	57095K352	000000
Taper Lock	3020	40 mm	57095K357	000000
Taper Lock	3020	48 mm	57095K361	000000
Taper Lock	3020	55 mm	57095K363	000000

High-Torque HTD Timing Belt Pulleys for Hex Shafts

No need for set screws—these pulleys have bores with six walls that engage with the shaft to transfer torque. They're a good choice when your setup needs to come apart frequently since there aren't extra mounting steps such as press fitting or installing bushings. These pulleys have curved HTD teeth that interlock with the matching belt better than trapezoidal teeth, so they transmit about twice the torque. All are compatible with Gates PowerGrip HTD, Omega HP, and Carlisle RPP series.

Corrosion-Resistant Aluminum—Won't rust in wet environments and one-third the weight of steel and iron. However, aluminum pulleys are not as strong as iron and steel.

	Bore Type	Hex Wd.	Pitch Dia., mm	No. of Flanges	Hub Type		Each
For H5M Trade Size







	Corrosion-Resistant Aluminum

	9	5	18	Finished	1/2"	28.7	2	Standard	5454N11	000000


	9	5	24	Finished	1/2"	38.2	2	Standard	5454N12	00000
	9	5	30	Finished	1/2"	47.8	2	Standard	5454N13	00000
	9	5	36	Finished	1/2"	57.3	2	Standard	5454N14	00000
	15	5	15	Finished	1/2"	23.9	2	Standard	5454N15	00000
	15	5	18	Finished	1/2"	28.7	2	Standard	5454N16	00000
	15	5	24	Finished	1/2"	38.2	2	Standard	5454N17	00000
	15	5	30	Finished	1/2"	47.8	2	Standard	5454N18	00000
	15	5	36	Finished	1/2"	57.3	2	Standard	5454N19	00000

Plastic Timing Belt Pulleys

Naturally rust resistant and lightweight, these plastic pulleys are ideal for machines that require frequent washdowns. Trapezoidal teeth, the original tooth profile, mesh with matching belts to transmit power without slipping.

Finished Bore—Mount these pulleys onto the shaft and secure with a set screw—no machining required.

Plain Bore—Do it your way—machine the bore to your exact shaft size or add a set screw or keyway.

Flush Hub—Ideal in tight spots where a raised hub would get in the way.

	Bore Type	For Shaft Dia.	Pitch Dia.	No. of Flanges	Hub Type		Each
For MXL Trade Size







	Polycarbonate

	1/4"	0.080"	10	Plain	3/32"	0.255"	2	Standard	1254N11	00000


	1/4"	0.080"	12	Plain	3/32"	0.306"	2	Standard	1254N13	0000
	1/4"	0.080"	14	Plain	1/8"	0.357"	2	Standard	1254N14	0000
	1/4"	0.080"	15	Plain	1/8"	0.382"	2	Standard	1254N15	0000
	1/4"	0.080"	16	Plain	1/8"	0.407"	2	Standard	1254N16	0000
	1/4"	0.080"	18	Plain	3/16"	0.458"	2	Standard	1254N17	0000
	1/4"	0.080"	20	Plain	3/16"	0.509"	2	Standard	1254N18	0000
	1/4"	0.080"	21	Plain	3/16"	0.535"	2	Standard	1254N19	0000
	1/4"	0.080"	22	Plain	3/16"	0.56"	2	Standard	1254N2	0000
	1/4"	0.080"	24	Plain	3/16"	0.611"	2	Standard	1254N21	0000
	1/4"	0.080"	28	Plain	1/4"	0.713"	2	Standard	1254N22	0000


	1/4"	0.080"	30	Plain	1/4"	0.764"	2	Standard	1254N23	0000
	1/4"	0.080"	36	Plain	1/4"	0.917"	2	Standard	1254N24	0000
	1/4"	0.080"	40	Plain	1/4"	1.019"	2	Standard	1254N25	0000
	1/4"	0.080"	42	Plain	1/4"	1.07"	2	Standard	1254N26	0000
	1/4"	0.080"	60	Plain	1/4"	1.53"	2	Standard	1254N27	0000
	6 mm	0.080"	10	Plain	3 mm	6.5 mm	1	Standard	7717N12	0000
	6 mm	0.080"	10	Plain	3 mm	6.5 mm	2	Standard	7717N11	00000
	6 mm	0.080"	14	Plain	4 mm	9.1 mm	1	Standard	7717N18	0000
	6 mm	0.080"	14	Plain	4 mm	9.1 mm	2	Standard	7717N17	00000
	6 mm	0.080"	15	Plain	4 mm	9.7 mm	2	Standard	7717N19	00000


	6 mm	0.080"	16	Plain	4 mm	10.3 mm	2	Standard	7717N22	00000
	6 mm	0.080"	18	Plain	6 mm	11.6 mm	1	Standard	7717N27	0000
	6 mm	0.080"	18	Plain	6 mm	11.6 mm	2	Standard	7717N25	00000
	6 mm	0.080"	18	Plain	8 mm	11.6 mm	1	Standard	7717N26	0000
	6 mm	0.080"	18	Plain	8 mm	11.6 mm	2	Standard	7717N24	00000
	6 mm	0.080"	20	Plain	8 mm	12.9 mm	1	Standard	7717N29	00000
	6 mm	0.080"	20	Plain	8 mm	12.9 mm	2	Standard	7717N28	00000
	6 mm	0.080"	26	Plain	8 mm	16.8 mm	2	Standard	7717N47	00000
	6 mm	0.080"	30	Plain	8 mm	19.4 mm	1	Standard	7717N58	00000
	6 mm	0.080"	30	Plain	8 mm	19.4 mm	2	Standard	7717N56	00000


	6 mm	0.080"	32	Plain	8 mm	20.7 mm	1	Standard	7717N62	00000
	6 mm	0.080"	36	Plain	8 mm	23.3 mm	2	Flush	7717N64	00000
	6 mm	0.080"	36	Plain	8 mm	23.3 mm	2	Standard	7717N65	00000
	6 mm	0.080"	40	Plain	8 mm	25.9 mm	2	Flush	7717N68	00000
	6 mm	0.080"	40	Plain	8 mm	25.9 mm	2	Standard	7717N69	00000
	6 mm	0.080"	60	Plain	8 mm	38.8 mm	2	Standard	7717N83	00000
	6 mm	0.080"	65	Plain	8 mm	42 mm	2	Standard	7717N85	00000
	6 mm	0.080"	90	Plain	8 mm	58.2 mm	2	Standard	7717N89	00000
	6 mm	0.080"	100	Plain	8 mm	64.7 mm	1	Standard	7717N93	00000
	6 mm	0.080"	120	Plain	8 mm	77.6 mm	2	Standard	7717N96	00000
	MXL Series Lightweight Timing Belt Pulley, 6mm Maximum Belt Width, 82mm OD, 17.5mm Wide Overall, 2 Flanges Product Detail QuantityEachIn stock Select a compatible file type: Parasolid


	6 mm	0.080"	130	Plain	8 mm	84.1 mm	1	Standard	7717N99	00000
	6 mm	0.080"	130	Plain	8 mm	84.1 mm	2	Standard	7717N98	00000


For XL Trade Size







	Acetal

	3/8"	0.200"	10	Finished	3/16"	0.637"	2	Standard	57105K11	00000


	3/8"	0.200"	10	Finished	6 mm	0.64"	2	Standard	3563N11	00000
	3/8"	0.200"	11	Finished	3/16"	0.7"	2	Standard	57105K12	00000
	3/8"	0.200"	11	Finished	6 mm	0.7"	2	Standard	3563N12	00000
	3/8"	0.200"	12	Finished	3/16"	0.764"	2	Standard	57105K13	00000
	3/8"	0.200"	12	Finished	6 mm	0.76"	2	Standard	3563N13	00000
	3/8"	0.200"	14	Finished	1/4"	0.891"	2	Standard	57105K14	00000
	3/8"	0.200"	14	Finished	8 mm	0.89"	2	Standard	3563N14	00000
	3/8"	0.200"	15	Finished	1/4"	0.955"	2	Standard	57105K15	00000
	3/8"	0.200"	15	Finished	8 mm	0.96"	2	Standard	3563N15	00000
	3/8"	0.200"	16	Finished	1/4"	1.019"	2	Standard	57105K16	00000


	3/8"	0.200"	16	Finished	8 mm	1.02"	2	Standard	3563N16	00000
	3/8"	0.200"	18	Finished	1/4"	1.146"	2	Standard	57105K17	00000
	3/8"	0.200"	18	Finished	8 mm	1.15"	2	Standard	3563N17	00000
	3/8"	0.200"	20	Finished	1/4"	1.273"	2	Standard	57105K18	00000
	3/8"	0.200"	20	Finished	8 mm	1.27"	2	Standard	3563N18	00000
	3/8"	0.200"	21	Finished	1/4"	1.337"	2	Standard	57105K19	00000
	3/8"	0.200"	21	Finished	8 mm	1.34"	2	Standard	3563N19	00000
	3/8"	0.200"	22	Finished	1/4"	1.401"	2	Standard	57105K21	00000
	3/8"	0.200"	22	Finished	8 mm	1.4"	2	Standard	3563N21	00000
	3/8"	0.200"	24	Finished	5/16"	1.528"	2	Standard	57105K22	00000


	3/8"	0.200"	24	Finished	8 mm	1.53"	2	Standard	3563N22	00000
	3/8"	0.200"	26	Finished	5/16"	1.655"	2	Standard	57105K23	00000
	3/8"	0.200"	26	Finished	8 mm	1.66"	2	Standard	3563N23	00000
	3/8"	0.200"	28	Finished	5/16"	1.783"	2	Standard	57105K24	00000
	3/8"	0.200"	28	Finished	8 mm	1.78"	2	Standard	3563N24	00000
	3/8"	0.200"	30	Finished	5/16"	1.91"	2	Standard	57105K25	00000
	3/8"	0.200"	30	Finished	10 mm	1.91"	2	Standard	3563N25	00000
	3/8"	0.200"	32	Finished	5/16"	2.037"	2	Standard	57105K26	00000
	3/8"	0.200"	32	Finished	10 mm	2.04"	2	Standard	3563N26	00000
	3/8"	0.200"	36	Finished	5/16"	2.292"	2	Standard	57105K27	00000


	3/8"	0.200"	36	Finished	10 mm	2.29"	2	Standard	3563N27	00000
	3/8"	0.200"	40	Finished	5/16"	2.546"	2	Standard	57105K28	00000
	3/8"	0.200"	40	Finished	10 mm	2.55"	2	Standard	3563N28	00000
	3/8"	0.200"	42	Finished	5/16"	2.674"	2	Standard	57105K29	00000
	3/8"	0.200"	42	Finished	10 mm	2.67"	2	Standard	3563N29	00000
	3/8"	0.200"	44	Finished	5/16"	2.801"	2	Standard	57105K31	00000
	3/8"	0.200"	44	Finished	10 mm	2.8"	2	Standard	3563N31	00000
	3/8"	0.200"	48	Finished	5/16"	3.056"	2	Standard	57105K32	00000
	3/8"	0.200"	48	Finished	12 mm	3.06"	2	Standard	3563N32	00000
	3/8"	0.200"	60	Finished	5/16"	3.82"	—	Standard	57105K33	00000


	3/8"	0.200"	60	Finished	12 mm	3.82"	—	Standard	3563N33	00000

Ultra-High-Torque GT Timing Belt Pulleys

Pair these pulleys with the strongest timing belts we offer, Ultra-High-Torque GT Timing Belts. They can handle as much torque as roller chain. Their curved teeth fit snugly with matching belts for minimal play (backlash), so these pulleys are good for applications that require precise positioning. All are compatible with Gates Poly Chain GT timing belts.

Steel and Iron—Strong but best for dry environments since moisture will cause them to rust.

					For Bushing
	For Max. Belt Wd., mm	Pitch, mm	No. of Teeth	Bore Type	Type	Trade No.	Pitch Dia., mm	No. of Flanges		Each
For 8MGT Trade Size







				Steel

				12	8	22	Bushing	Taper Lock	1008	56	2	7970K11	0000000


				21	8	22	Bushing	Taper Lock	1008	56	2	7970K15	000000




						Iron

						12	8	36	Bushing	Taper Lock	1610	92	2	7970K12	000000


						12	8	45	Bushing	Taper Lock	2012	115	2	7970K13	000000
						21	8	36	Bushing	Taper Lock	1610	92	2	7970K16	000000
						21	8	45	Bushing	Taper Lock	2012	115	2	7970K17	000000
						36	8	32	Bushing	Taper Lock	1210	81.5	2	7970K101	000000
						36	8	36	Bushing	Taper Lock	1610	91.7	2	7970K102	000000
						36	8	45	Bushing	Taper Lock	2012	114.6	2	7970K103	000000


						For 14MGT Trade Size







										Iron

										20	14	28	Bushing	Taper Lock	2012	124.8	2	7970K104	000000


										20	14	40	Bushing	Taper Lock	2517	178.3	2	7970K105	000000
										20	14	60	Bushing	Taper Lock	3525	267.4	2	7970K106	000000
										37	14	28	Bushing	Taper Lock	2012	124.8	2	7970K107	000000
										37	14	40	Bushing	Taper Lock	3020	178.3	2	7970K108	000000
										37	14	60	Bushing	Taper Lock	3525	267.4	2	7970K109	000000
										68	14	29	Bushing	Taper Lock	2517	129.2	2	7970K111	000000
										68	14	40	Bushing	Taper Lock	3020	178.3	2	7970K112	000000
										68	14	60	Bushing	Taper Lock	3525	267.4	2	7970K113	000000

Bushings

Taper-Lock

Bushing

Bushing
Type	Trade No.	For Shaft Dia.		Each
Taper Lock	1008	1/2"	57095K111	000000
Taper Lock	1008	5/8"	57095K112	00000
Taper Lock	1008	3/4"	57095K113	00000
Taper Lock	1008	7/8"	57095K114	00000
Taper Lock	1008	15/16"	57095K423	00000
Taper Lock	1008	1"	57095K115	00000
Taper Lock	1008	14 mm	57095K421	00000
Taper Lock	1008	16 mm	57095K422	00000
Taper Lock	1008	18 mm	57095K424	00000
Taper Lock	1008	19 mm	57095K425	00000
Taper Lock	1008	20 mm	57095K426	00000
Taper Lock	1008	22 mm	57095K427	00000
Taper Lock	1210	1/2"	57095K131	00000
Taper Lock	1210	5/8"	57095K132	00000
Taper Lock	1210	3/4"	57095K133	00000
Taper Lock	1210	7/8"	57095K137	00000
Taper Lock	1210	15/16"	57095K447	00000
Taper Lock	1210	1"	57095K134	00000
Taper Lock	1210	1 1/16"	57095K443	00000
Taper Lock	1210	1 1/8"	57095K135	00000
Taper Lock	1210	1 3/16"	57095K138	00000
Taper Lock	1210	1 1/4"	57095K136	00000
Taper Lock	1210	14 mm	57095K446	00000
Taper Lock	1210	16 mm	57095K448	00000
Taper Lock	1210	18 mm	57095K449	00000
Taper Lock	1210	20 mm	57095K452	00000
Taper Lock	1210	22 mm	57095K453	00000
Taper Lock	1210	24 mm	57095K454	00000
Taper Lock	1210	25 mm	57095K455	00000
Taper Lock	1210	28 mm	57095K456	00000
Taper Lock	1210	30 mm	57095K457	00000
Taper Lock	1210	32 mm	57095K458	00000
Taper Lock	1610	1/2"	57095K169	00000
Taper Lock	1610	5/8"	57095K161	00000
Taper Lock	1610	3/4"	57095K162	00000
Taper Lock	1610	13/16"	57095K487	00000
Taper Lock	1610	7/8"	57095K159	00000
Taper Lock	1610	15/16"	57095K489	00000
Taper Lock	1610	1"	57095K163	00000
Taper Lock	1610	1 1/16"	57095K484	00000
Taper Lock	1610	1 1/8"	57095K164	00000
Taper Lock	1610	1 3/16"	57095K311	00000
Taper Lock	1610	1 1/4"	57095K165	00000
Taper Lock	1610	1 5/16"	57095K485	00000
Taper Lock	1610	1 3/8"	57095K166	00000
Taper Lock	1610	1 7/16"	57095K312	00000
Taper Lock	1610	1 1/2"	57095K167	00000
Taper Lock	1610	1 9/16"	57095K486	00000
Taper Lock	1610	1 5/8"	57095K168	00000
Taper Lock	1610	1 11/16"	57095K271	00000
Taper Lock	1610	14 mm	57095K488	00000
Taper Lock	1610	16 mm	57095K491	00000
Taper Lock	1610	18 mm	57095K492	00000
Taper Lock	1610	19 mm	57095K493	00000
Taper Lock	1610	20 mm	57095K494	00000
Taper Lock	1610	22 mm	57095K495	00000
Taper Lock	1610	24 mm	57095K496	00000
Taper Lock	1610	25 mm	57095K497	00000
Taper Lock	1610	28 mm	57095K498	00000
Taper Lock	1610	30 mm	57095K499	00000
Taper Lock	1610	32 mm	57095K511	00000
Taper Lock	1610	35 mm	57095K512	00000
Taper Lock	1610	38 mm	57095K513	00000
Taper Lock	2012	1/2"	57095K181	00000
Taper Lock	2012	5/8"	57095K294	00000
Taper Lock	2012	3/4"	57095K182	00000
Taper Lock	2012	7/8"	57095K295	00000
Taper Lock	2012	15/16"	57095K545	00000
Taper Lock	2012	1"	57095K183	00000
Taper Lock	2012	1 1/8"	57095K184	00000
Taper Lock	2012	1 3/16"	57095K199	00000
Taper Lock	2012	1 1/4"	57095K185	00000
Taper Lock	2012	1 3/8"	57095K186	00000
Taper Lock	2012	1 7/16"	57095K187	00000
Taper Lock	2012	1 1/2"	57095K188	00000
Taper Lock	2012	1 9/16"	57095K542	00000
Taper Lock	2012	1 5/8"	57095K189	00000
Taper Lock	2012	1 11/16"	57095K538	00000
Taper Lock	2012	1 3/4"	57095K191	00000
Taper Lock	2012	1 7/8"	57095K192	00000
Taper Lock	2012	1 15/16"	57095K313	00000
Taper Lock	2012	2"	57095K193	00000
Taper Lock	2012	2 1/8"	57095K196	000000
Taper Lock	2012	20 mm	57095K548	00000
Taper Lock	2012	22 mm	57095K549	00000
Taper Lock	2012	24 mm	57095K551	00000
Taper Lock	2012	25 mm	57095K552	00000
Taper Lock	2012	28 mm	57095K553	00000
Taper Lock	2012	30 mm	57095K554	00000
Taper Lock	2012	32 mm	57095K555	00000
Taper Lock	2012	35 mm	57095K556	00000
Taper Lock	2012	38 mm	57095K557	00000
Taper Lock	2012	40 mm	57095K558	00000
Taper Lock	2012	42 mm	57095K559	00000
Taper Lock	2012	45 mm	57095K561	00000
Taper Lock	2012	50 mm	57095K563	00000
Taper Lock	2517	3/4"	57095K224	00000
Taper Lock	2517	7/8"	57095K225	00000
Taper Lock	2517	1"	57095K211	00000
Taper Lock	2517	1 1/8"	57095K226	00000
Taper Lock	2517	1 3/16"	57095K232	00000
Taper Lock	2517	1 1/4"	57095K227	00000
Taper Lock	2517	1 5/16"	57095K233	00000
Taper Lock	2517	1 3/8"	57095K212	00000
Taper Lock	2517	1 7/16"	57095K234	00000
Taper Lock	2517	1 1/2"	57095K213	00000
Taper Lock	2517	1 5/8"	57095K214	00000
Taper Lock	2517	1 11/16"	57095K235	00000
Taper Lock	2517	1 3/4"	57095K215	00000
Taper Lock	2517	1 13/16"	57095K566	00000
Taper Lock	2517	1 7/8"	57095K228	00000
Taper Lock	2517	1 15/16"	57095K236	00000
Taper Lock	2517	2"	57095K216	00000
Taper Lock	2517	2 1/8"	57095K217	00000
Taper Lock	2517	2 3/16"	57095K237	00000
Taper Lock	2517	2 1/4"	57095K218	00000
Taper Lock	2517	2 3/8"	57095K219	00000
Taper Lock	2517	2 7/16"	57095K238	00000
Taper Lock	2517	2 1/2"	57095K221	00000
Taper Lock	2517	2 5/8"	57095K229	000000
Taper Lock	2517	2 11/16"	57095K231	000000
Taper Lock	2517	24 mm	57095K578	00000
Taper Lock	2517	25 mm	57095K579	00000
Taper Lock	2517	30 mm	57095K582	00000
Taper Lock	2517	32 mm	57095K583	00000
Taper Lock	2517	35 mm	57095K584	00000
Taper Lock	2517	38 mm	57095K585	00000
Taper Lock	2517	40 mm	57095K586	00000
Taper Lock	2517	42 mm	57095K587	00000
Taper Lock	2517	45 mm	57095K588	00000
Taper Lock	2517	48 mm	57095K589	00000
Taper Lock	2517	50 mm	57095K591	00000
Taper Lock	3020	1"	57095K314	000000
Taper Lock	3020	1 1/8"	57095K318	000000
Taper Lock	3020	1 1/4"	57095K317	000000
Taper Lock	3020	1 3/8"	57095K325	000000
Taper Lock	3020	1 7/16"	57095K328	000000
Taper Lock	3020	1 1/2"	57095K316	000000
Taper Lock	3020	1 5/8"	57095K327	000000
Taper Lock	3020	1 3/4"	57095K324	000000
Taper Lock	3020	1 7/8"	57095K329	000000
Taper Lock	3020	1 15/16"	57095K322	000000
Taper Lock	3020	2"	57095K333	000000
Taper Lock	3020	2 1/8"	57095K337	000000
Taper Lock	3020	2 3/8"	57095K344	000000
Taper Lock	3020	2 7/16"	57095K347	000000
Taper Lock	3020	2 1/2"	57095K335	000000
Taper Lock	3020	2 3/4"	57095K343	000000
Taper Lock	3020	2 7/8"	57095K348	000000
Taper Lock	3020	2 15/16"	57095K341	000000
Taper Lock	3020	3"	57095K352	000000
Taper Lock	3020	40 mm	57095K357	000000
Taper Lock	3020	48 mm	57095K361	000000
Taper Lock	3020	55 mm	57095K363	000000

Quiet-Drive Tire-Track Timing Belt Pulleys

Plain Bore

Bushing Bore

Crank up the power and turn down the noise. With curved teeth arranged in a tire-track pattern, these pulleys fit snugly into matching belts. The flush fit reduces play (backlash) for more precise movement and up to 25% less operating noise. Compared to pulleys with trapezoidal teeth, they deliver higher torque with less vibration and smoother performance.

Iron—Strong but best for dry environments since moisture will cause them to rust.

Plain Bore—Do it your way—machine the bore to your exact shaft size or add a set screw or keyway.

						For Bushing
	For Max. Belt Wd., mm	Pitch, mm	No. of Teeth	Bore Type	For Shaft Dia.	Type	Trade No.	Pitch Dia., mm	Hub Type		Each
For NRG Trade Size







				Iron

				16	8	18	Plain	1/2"	—	—	46	Standard	7955K11	0000000


				16	8	28	Bushing	—	Split Tapered	H	71	—	7955K12	000000
				16	8	36	Bushing	—	Quick Disconnect (QD)	SH	92	—	7955K13	000000
				32	8	25	Plain	1/2"	—	—	64	Standard	7955K16	000000
				32	8	40	Bushing	—	Quick Disconnect (QD)	SH	102	—	7955K17	000000
				32	8	48	Bushing	—	Quick Disconnect (QD)	SDS	122	—	7955K19	000000

Bushings

Quick-Disconnect

Bushing

Split-Tapered

Bushing

Bushing
Type	Trade No.	For Shaft Dia.		Each
Quick Disconnect (QD)	SH	1/2"	6086K211	000000
Quick Disconnect (QD)	SH	5/8"	6086K212	00000
Quick Disconnect (QD)	SH	11/16"	6086K226	00000
Quick Disconnect (QD)	SH	3/4"	6086K213	00000
Quick Disconnect (QD)	SH	7/8"	6086K214	00000
Quick Disconnect (QD)	SH	15/16"	6086K215	00000
Quick Disconnect (QD)	SH	1"	6086K216	00000
Quick Disconnect (QD)	SH	1 1/16"	6086K217	00000
Quick Disconnect (QD)	SH	1 1/8"	6086K218	00000
Quick Disconnect (QD)	SH	1 3/16"	6086K219	00000
Quick Disconnect (QD)	SH	1 1/4"	6086K221	00000
Quick Disconnect (QD)	SH	1 5/16"	6086K848	00000
Quick Disconnect (QD)	SH	1 3/8"	6086K222	00000
Quick Disconnect (QD)	SH	1 7/16"	6086K849	00000
Quick Disconnect (QD)	SH	1 1/2"	6086K223	00000
Quick Disconnect (QD)	SH	1 5/8"	6086K224	00000
Quick Disconnect (QD)	SH	1 11/16"	6086K225	00000
Quick Disconnect (QD)	SH	22 mm	2344K71	00000
Quick Disconnect (QD)	SH	24 mm	2344K11	00000
Quick Disconnect (QD)	SH	25 mm	2344K12	00000
Quick Disconnect (QD)	SH	28 mm	2344K13	00000
Quick Disconnect (QD)	SH	30 mm	2344K14	00000
Quick Disconnect (QD)	SH	32 mm	2344K15	00000
Quick Disconnect (QD)	SH	35 mm	2344K16	00000
Quick Disconnect (QD)	SDS	1/2"	6086K311	00000
Quick Disconnect (QD)	SDS	9/16"	6086K131	00000
Quick Disconnect (QD)	SDS	5/8"	6086K312	00000
Quick Disconnect (QD)	SDS	3/4"	6086K313	00000
Quick Disconnect (QD)	SDS	7/8"	6086K314	00000
Quick Disconnect (QD)	SDS	15/16"	6086K315	00000
Quick Disconnect (QD)	SDS	1"	6086K316	00000
Quick Disconnect (QD)	SDS	1 1/16"	6086K317	00000
Quick Disconnect (QD)	SDS	1 1/8"	6086K318	00000
Quick Disconnect (QD)	SDS	1 3/16"	6086K319	00000
Quick Disconnect (QD)	SDS	1 1/4"	6086K321	00000
Quick Disconnect (QD)	SDS	1 5/16"	6086K851	00000
Quick Disconnect (QD)	SDS	1 3/8"	6086K322	00000
Quick Disconnect (QD)	SDS	1 7/16"	6086K323	00000
Quick Disconnect (QD)	SDS	1 1/2"	6086K324	00000
Quick Disconnect (QD)	SDS	1 9/16"	6086K132	00000
Quick Disconnect (QD)	SDS	1 5/8"	6086K325	00000
Quick Disconnect (QD)	SDS	1 11/16"	6086K852	00000
Quick Disconnect (QD)	SDS	1 3/4"	6086K326	00000
Quick Disconnect (QD)	SDS	1 7/8"	6086K853	00000
Quick Disconnect (QD)	SDS	1 15/16"	6086K854	00000
Quick Disconnect (QD)	SDS	2"	6086K327	00000
Quick Disconnect (QD)	SDS	24 mm	2344K21	00000
Quick Disconnect (QD)	SDS	25 mm	2344K22	00000
Quick Disconnect (QD)	SDS	28 mm	2344K23	00000
Quick Disconnect (QD)	SDS	30 mm	2344K24	00000
Quick Disconnect (QD)	SDS	32 mm	2344K25	00000
Quick Disconnect (QD)	SDS	35 mm	2344K26	00000
Quick Disconnect (QD)	SDS	38 mm	2344K27	00000
Quick Disconnect (QD)	SDS	40 mm	2344K28	00000
Quick Disconnect (QD)	SDS	42 mm	2344K29	00000
Split Tapered	H	3/8"	6086K191	00000
Split Tapered	H	1/2"	6086K192	00000
Split Tapered	H	5/8"	6086K197	00000
Split Tapered	H	3/4"	6086K193	00000
Split Tapered	H	7/8"	6086K198	00000
Split Tapered	H	1"	6086K194	00000
Split Tapered	H	1 1/8"	6086K199	00000
Split Tapered	H	1 3/16"	6086K227	00000
Split Tapered	H	1 1/4"	6086K195	00000
Split Tapered	H	1 3/8"	6086K229	00000
Split Tapered	H	1 7/16"	6086K228	00000
Split Tapered	H	1 1/2"	6086K196	00000
Split Tapered	H	10 mm	9859T711	00000
Split Tapered	H	12 mm	9859T713	00000
Split Tapered	H	14 mm	9859T714	00000
Split Tapered	H	16 mm	9859T715	00000
Split Tapered	H	18 mm	9859T716	00000
Split Tapered	H	19 mm	9859T717	00000
Split Tapered	H	20 mm	9859T718	00000
Split Tapered	H	22 mm	9859T719	00000
Split Tapered	H	24 mm	9859T721	00000
Split Tapered	H	25 mm	9859T722	00000
Split Tapered	H	28 mm	9859T723	00000
Split Tapered	H	30 mm	9859T724	00000
Split Tapered	H	32 mm	9859T725	00000
Split Tapered	H	35 mm	9859T726	00000
Split Tapered	H	38 mm	9859T728	00000