8168T51 | Shock-Absorbing Fall-Arrest Lanyard

Filter by

Length

Anchor Point Attachment Method

Weight Capacity

Number of Anchor End Connections

Construction

Webbing

Wire Rope

Quick-Stop Lanyard Class

Component

Anchor End Connection Hardware

Cab-Mount Bracket

Carabiner

Carabiner with Swivel Eye

Snap Hook

Snap Hook with Swivel Eye

Material

Performance

Snap Hook Opening Size

Specifications Met

Application

Harness End Connection Hardware

Carabiner with Swivel Eye

Pin Retainer

Snap Hook

Snap Hook with Swivel Eye

Housing Material

Length After Fall

Harness End Connector Material

RoHS

Anchor End Connector Material

Aluminum

Stainless Steel

Steel

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

REACH

Compliant

Not Compliant

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Exempt

Minimum Fall Clearance Required

Environment

High-Pressure Washdown

Washdown

Wet

Carabiner Opening Width

59 Products

Shock-Absorbing Fall-Arrest Lanyards with Anchor


Hook Over	Wraparound


Hook Over with 1 Anchor End Connection	Hook Over with 2 Anchor End Connections

Wraparound with 1 Anchor End Connection	Wraparound with 2 Anchor End Connections

A lanyard and an anchor in one—these lanyards attach to rated structures to give you a secure place to clip in for fall protection. If you fall when working at height, these lanyards extend to slow and stop your fall. However, you'll fall farther than you would with a quick-stop lanyard. When used together with a harness and anchor, these lanyards help you meet OSHA and ANSI safety standards.

Hook-Over Anchor Point—Hook-over lanyards have a large snap hook, known as a rebar hook, that attaches directly to a rated structure such as a scaffold or pipe to create an anchor point.

Wraparound Anchor Point—Wraparound lanyards loop around a rated structure such as an I-beam and then attach to themselves to create an anchor point.

1 Anchor End Connection—Lanyards with 1 anchor end connection are for working in a single location.

2 Anchor End Connections—Lanyards with 2 anchor end connections let you move between anchors while staying tethered. Attach to the new anchor point before disconnecting from the previous one.

Webbing—Webbing lanyards are flexible and lightweight, so they won't weigh you down.

Wire Rope—Wire rope lanyards are more abrasion resistant than webbing lanyards, so they withstand sharp edges without fraying or snapping. They have a bright green plastic coating to make damage obvious during inspections.

Impact-Indicating Stitching—Lanyards with impact-indicating stitching have patches designed to tear during a fall or impact, so it’s easy to tell if a lanyard is still safe to use.

RFID Tag—Lanyards with an RFID tag can be scanned to log inspections, track usage, and schedule maintenance to keep your lanyard compliant with safety regulations.

					Harness End Connection		Anchor End Connection
	Lg., ft.	Lg. After Fall, ft.	Material	Coating Material	Hardware	Material	Hardware	Material	Snap Hook Opening Size	Wt. Cap., lb.	Specs. Met	Features		Each
Hook Over with 1 Anchor End Connection







				Abrasion Resistant, Shock Absorbing Wire Rope

				6	10	Steel	Polyurethane Plastic	Snap Hook	Steel	Snap Hook	Steel	1 1/4", 2 1/2"	420	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	8168T412	000000




						Shock Absorbing Webbing

						6	10	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	3/4", 2 1/2"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	8168T773	00000


						6	10	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	13/16", 2 1/2"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	UV Resistant	8168T771	00000


						Hook Over with 2 Anchor End Connections







										Abrasion Resistant, Shock Absorbing Wire Rope

										6	10	Steel	Polyurethane Plastic	Snap Hook	Steel	Snap Hook	Steel	1 1/4", 2 1/2"	420	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	8168T413	000000




												Shock Absorbing Webbing

												6	10	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	1 1/2", 3"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	UV Resistant	8168T411	000000


												Wraparound with 1 Anchor End Connection







																Shock Absorbing Webbing

																6	10	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	3/4"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	RFID Tag	8168T18	00000


																4 to 6	10	Nylon	—	Snap Hook	Steel	Snap Hook	Steel	3/4"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	RFID Tag	8168T54	000000


																Wraparound with 2 Anchor End Connections







																		Shock Absorbing Webbing

																		6	10	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	3/4"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	RFID Tag	8168T65	000000

Quick-Stop Retracting Fall-Arrest Lanyards


1 Anchor End Connection, Webbing	1 Anchor End Connection, Wire Rope	2 Anchor End Connections, Webbing	2 Anchor End Connections, Wire Rope

Move freely, but limit how far you drop if you fall while working at height. These lanyards extend and retract as you move around to keep the slack out of your way. But with a sudden jerk, such as a fall, they immediately lock like a seat belt to stop you. They stop your fall within inches, unlike shock-absorbing lanyards that extend several feet. A built-in shock absorber reduces the jolt of the stop. Used together with a harness and an anchor, they help you meet OSHA and ANSI safety standards.

Class 1—Use Class 1 lanyards when your anchor is at the same level as or above your D-ring.

Class 2—Class 2 lanyards are more versatile than Class 1 lanyards. Use them when your anchor is above, level with, or up to 5 ft. below your D-ring. They meet safety standards to prevent fraying or breaking if you fall near a sharp edge.

1 Anchor End Connection—Lanyards with 1 anchor end connection are best when you’re working in a single location.

2 Anchor End Connections—Lanyards with 2 anchor end connections let you move between anchors while staying tethered. Attach to the new anchor point before disconnecting from the previous one.

Webbing—Webbing lanyards are flexible and lightweight, so they won't weigh you down.

Wire Rope—Wire rope lanyards hold up to abrasion better than webbing lanyards for a longer lifespan. They also resist corrosion.

Cab-Mount Bracket—Lanyards with a cab-mounting bracket have a curved top that slides along the rail of your vehicle, so you can move freely.

Impact-Indicating Stitching—Lanyards with impact indicator stitching have patches designed to tear during a fall or impact, so it’s easy to tell if a lanyard is still safe to use.

RFID Tag—Lanyards with an RFID tag can be scanned during inventory and inspections to make tracking easy.

				Harness End Connection		Anchor End Connection
	Lg., ft.	Material	Construction	Hardware	Material	Hardware	Material	Snap Hook Opening Size	Housing Material	Wt. Cap., lb.	Specs. Met	Features		Each
Class 1







				1 Anchor End Connection

				6	Polyester Plastic	Webbing	Snap Hook	Steel	Carabiner with Swivel Eye	Steel	13/16"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	8091T13	0000000


				6	Polyester Plastic	Webbing	Snap Hook	Aluminum	Carabiner with Swivel Eye	Steel	3/4"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching, Lightweight Hardware	9363N117	000000
				6	Polyester Plastic	Webbing	Snap Hook with Swivel Eye	Steel	Carabiner with Swivel Eye	Steel	13/16"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	9363N116	000000
				6	UHMW Polyethylene	Webbing	Snap Hook	Steel	Cab-Mount Bracket	Stainless Steel	3/4"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	RFID Tag	9363N111	000000
				11	UHMW Polyethylene	Webbing	Snap Hook	Steel	Cab-Mount Bracket	Stainless Steel	3/4"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	9363N112	000000
				11	UHMW Polyethylene	Webbing	Snap Hook	Steel	Carabiner with Swivel Eye	Steel	13/16"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	—	8091T45	000000
				11	UHMW Polyethylene	Webbing	Snap Hook	Aluminum	Carabiner with Swivel Eye	Aluminum	3/4"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching, Lightweight Hardware	9363N118	000000
				20	UHMW Polyethylene	Webbing	Snap Hook	Steel	Carabiner	Steel	3/4"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	8091T91	000000
				25	—	Wire Rope	Snap Hook with Swivel Eye	Stainless Steel	Carabiner	Stainless Steel	3/4"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip, RFID Tag	8091T85	000000




						2 Anchor End Connections

						6	UHMW Polyethylene	Webbing	Pin Retainer	Steel	Snap Hook	Steel	3/4"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	—	8091T25	000000


						Class 2







										1 Anchor End Connection

										6	Kevlar/UHMW Polyethylene	Webbing	Pin Retainer	Steel	Snap Hook	Steel	1"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	RFID Tag	9363N123	000000


										6	Kevlar/UHMW Polyethylene	Webbing	Pin Retainer	Steel	Snap Hook with Swivel Eye	Steel	1"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	RFID Tag	9363N124	000000
										8	Galvanized Steel	Wire Rope	Pin Retainer	Steel	Snap Hook	Steel	13/16"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	9363N115	000000
										8	Kevlar/UHMW Polyethylene	Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	13/16"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Lightweight Hardware, UV Resistant	9363N119	000000
										8	Kevlar/UHMW Polyethylene	Webbing	Pin Retainer	Aluminum	Snap Hook with Swivel Eye	Steel	2"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Lightweight Hardware, UV Resistant	9363N121	000000
										9	Polyester Plastic	Webbing	Snap Hook	Steel	Carabiner with Swivel Eye	Steel	13/16"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	8091T44	000000
										20	Galvanized Steel	Wire Rope	Snap Hook with Swivel Eye	Steel	Carabiner with Swivel Eye	Steel	3/4"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	9363N113	000000
										50	Galvanized Steel	Wire Rope	Snap Hook with Swivel Eye	Steel	Carabiner with Swivel Eye	Steel	3/4"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	9363N114	000000




												2 Anchor End Connections

												6	Kevlar/UHMW Polyethylene	Webbing	Pin Retainer	Steel	Snap Hook	Steel	1"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	RFID Tag	9363N125	000000


												6	Kevlar/UHMW Polyethylene	Webbing	Pin Retainer	Steel	Snap Hook with Swivel Eye	Steel	1"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	RFID Tag	9363N126	000000
												8	Galvanized Steel	Wire Rope	Pin Retainer	Aluminum	Snap Hook	Steel	13/16"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Lightweight Hardware	9363N122	000000

Shock-Absorbing Fall-Arrest Lanyards


1 Anchor End Connection Webbing	1 Anchor End Connection Wire Rope

2 Anchor End Connections Webbing	2 Anchor End Connections Webbing

If you fall when working at height, these lanyards extend to slow and stop your fall. However, you'll fall farther than you would with a quick-stop lanyard. When used together with a harness and anchor, these lanyards help you meet OSHA and ANSI safety standards.

1 Anchor End Connection—Lanyards with 1 anchor end connection are for working in a single location.

2 Anchor End Connections—Lanyards with 2 anchor end connections let you move between anchors while staying tethered. Attach to the new anchor point before disconnecting from the previous one.

Webbing—Webbing lanyards are flexible and lightweight, so they won't weigh you down.

Wire Rope—Wire rope lanyards are durable and resist abrasion, so they won’t fray or snap if you fall over a sharp edge. They have a bright green plastic coating to make damage obvious during inspections.

Impact-Indicating Stitching—Lanyards with impact-indicating stitching have patches designed to tear during a fall or impact, so it’s easy to tell if a lanyard is still safe to use.

RFID Tag—Lanyards with an RFID tag can be scanned to log inspections, track usage, and schedule maintenance to keep your lanyard compliant with safety regulations.

					Harness End Connection		Anchor End Connection
	Lg., ft.	Lg. After Fall, ft.	Material	Coating Material	Hardware	Material	Hardware	Material	Snap Hook Opening Size	Wt. Cap., lb.	Specs. Met	Features		Each
1 Anchor End Connection







				Abrasion Resistant, Shock Absorbing Wire Rope

				6	10	Steel	Polyurethane Plastic	Snap Hook	Steel	Snap Hook	Steel	1 1/4"	420	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	8168T214	000000




						Shock Absorbing Webbing

						3	7	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	1 3/8"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	—	8168T211	00000


						6	10	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	3/4"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	8168T772	00000
						4 to 6	10	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	3/4"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	RFID Tag	8168T16	00000


						2 Anchor End Connections







										Abrasion Resistant, Shock Absorbing Wire Rope

										6	10	Steel	Polyurethane Plastic	Snap Hook	Steel	Snap Hook	Steel	1 1/4"	420	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	8168T215	00000




												Shock Absorbing Webbing

												3	7	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	1 1/2"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	—	8168T212	00000


												6	10	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	1 1/2"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	UV Resistant	8168T213	00000
												4 to 6	10	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	3/4"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	RFID Tag	8168T51	00000
												Shock-Absorbing Fall-Arrest Lanyard with 2 Anchor End Connections, Webbing, 4 Feet to 6 Feet Long Product Detail QuantityEachIn stock

Quick-Stop Retracting Fall-Arrest Lanyards with Alarms

Like an alarm on your car dashboard, these lanyards flash and beep until you're clipped into fall protection on an order picker or other vehicle. They come with a Bluetooth sensor that pairs with the lanyard carabiner. Together they detect when you're onboard and clipped into the anchor point. Compatible with most order pickers, the sensor mounts to the cab of your vehicle and hooks into its wiring for power.

These lanyards extend and retract as you move around, but with a sudden jerk, such as a fall, they immediately lock like a seat belt to stop you. They stop your fall within inches, unlike shock-absorbing lanyards that extend several feet. A built-in shock absorber reduces the jolt of the stop. These lanyards are Class 1, so they work with D-rings that are at the same level as or below your anchor. When used together with an anchor and a harness, these lanyards help you meet OSHA and ANSI safety standards.

An RFID tag makes these lanyards easy to track during inventory and inspections.

Class 1

			Harness End Connection		Anchor End Connection
	Lg., ft.	Material	Hardware	Material	Hardware	Material	Carabiner Opening Wd.	Wt. Cap., lb.	Housing Material	Batteries Included	Specs. Met	Includes	Features		Each
1 Anchor End Connection







				Webbing

				6	UHMW Polyethylene	Carabiner with Swivel Eye	Aluminum	Carabiner with Swivel Eye	Steel	3/4", 13/16"	310	Plastic	Yes	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Bluetooth Sensor, Cable Ties, LED Light Strips, Sensor Power Cable with Wire Leads	Lightweight Hardware, RFID Tag	9366N101	000000000

Harsh-Environment Quick-Stop Retracting Fall-Arrest Lanyards

No matter how dirty and wet a job gets at height, these lanyards are built to last and work fast. Made of stainless steel, the wire rope and housing withstand corrosive and grimy conditions. The housing, rated IP69K, is fully sealed to keep out dust and high-pressure water.

These lanyards extend and retract as you move around, but with a sudden jerk, such as a fall, they immediately lock like a seat belt to stop you. They stop your fall within inches, unlike shock-absorbing lanyards that extend several feet. A built-in shock absorber reduces the jolt of the stop. They’re Class 1, so they work with D-rings that are at the same level or below your anchor. When used together with an anchor and a harness, these lanyards help you meet OSHA and ANSI safety standards.

An RFID tag makes these lanyards easy to track during inventory and inspections.

Class 1

			Harness End Connection		Anchor End Connection
	Lg., ft.	Material	Hardware	Material	Hardware	Material	Snap Hook Opening Size	Wt. Cap., lb.	Housing Material	Enclosure Rating	Specs. Met	Features		Each
1 Anchor End Connection







				Abrasion Resistant Wire Rope

				15	Stainless Steel	Snap Hook with Swivel Eye	Steel	Carabiner	Stainless Steel	3/4"	420	Stainless Steel	IP69K	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip, RFID Tag	9353N111	000000000


				50	Stainless Steel	Snap Hook with Swivel Eye	Stainless Steel	Carabiner	Stainless Steel	3/4"	420	Stainless Steel	IP69K	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip, RFID Tag	8091T57	00000000

Quick-Stop Retracting Fall-Arrest Lanyards with Anchor


Hook Over	Wraparound


Hook-Over Anchor Point 1 Anchor End Connection	Hook-Over Anchor Point, 2 Anchor End Connections	Wraparound Anchor Point, 1 Anchor End Connection	Wraparound Anchor Point, 2 Anchor End Connections

Clip these lanyards onto a rated structure—they form their own anchor. They extend and retract as you move around, but with a sudden jerk, such as a fall, they immediately lock like a seat belt to stop you. They stop your fall within inches, unlike shock-absorbing lanyards that extend several feet. A built-in shock absorber reduces the jolt of the stop. Used together with a harness, they help you meet OSHA and ANSI safety standards.

Class 1—Use Class 1 lanyards when the anchor is at the same level as or above your D-ring.

Class 2—Class 2 lanyards are more versatile than Class 1 lanyards. Use them when the anchor is above, level with, or up to 5 ft. below your D-ring. Since they're made with Kevlar webbing or wire rope, they meet safety standards to prevent fraying or breaking if you fall near a sharp edge.

Hook-Over Anchor Point—Hook-over lanyards have a large snap hook, known as a rebar hook, that attaches directly to a rated structure such as a scaffold or pipe to create an anchor point.

Wraparound Anchor Point—Wraparound lanyards loop around a rated structure such as an I-beam and then attach to themselves to create an anchor point.

1 Anchor End Connection—Lanyards with 1 anchor end connection are best when you’re working in a single location.

2 Anchor End Connections—Lanyards with 2 anchor end connections let you move between anchors while staying tethered. Attach the new anchor point before disconnecting the previous one.

Webbing—Webbing lanyards are flexible and lightweight, so they won't weigh you down.

Wire Rope—Wire rope lanyards hold up to abrasion better than webbing lanyards for a longer lifespan.

Anchored Housing—Lanyards with an anchored housing are easier on your back than other retracting lanyards, since the weight of the housing hangs on the anchor rather than your harness’s D-ring.

				Harness End Connection		Anchor End Connection
	Lg., ft.	Material	Construction	Hardware	Material	Hardware	Material	Carabiner Opening Wd.	Snap Hook Opening Size	Housing Material	Wt. Cap., lb.	Specs. Met	Features		Each
Class 1—Hook Over







				1 Anchor End Connection

				6	UHMW Polyethylene	Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	2"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Anchored Housing, Lightweight Aluminum Hardware	8091T111	0000000




						2 Anchor End Connections

						6	UHMW Polyethylene	Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	2"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Anchored Housing, Lightweight Aluminum Hardware	8091T112	000000


						Class 1—Wraparound







										1 Anchor End Connection

										9	UHMW Polyethylene	Webbing	Carabiner with Swivel Eye	Steel	Snap Hook	Steel	2"	3/4"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	—	8091T884	000000


										Class 2—Hook Over







														1 Anchor End Connection

														8	Galvanized Steel	Wire Rope	Pin Retainer	Steel	Snap Hook	Steel	—	2 1/2"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	8091T211	000000


														8	Kevlar	Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	2 1/2"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Lightweight Aluminum Hardware, UV Resistant	8091T883	000000




																2 Anchor End Connections

																8	Galvanized Steel	Wire Rope	Pin Retainer	Steel	Snap Hook	Steel	—	2 1/2"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	8091T212	000000


																8	Kevlar	Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	2 1/2"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Lightweight Aluminum Hardware, UV Resistant	8091T313	000000


																Class 2—Wraparound







																		1 Anchor End Connection

																		8	Galvanized Steel	Wire Rope	Pin Retainer	Steel	Snap Hook	Steel	—	5/8"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	8091T213	000000


		8	Kevlar															Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	1"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Lightweight Aluminum Hardware, UV Resistant	8091T311	000000




				2 Anchor End Connections

				8	Galvanized Steel													Wire Rope	Pin Retainer	Steel	Snap Hook	Steel	—	5/8"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	8091T214	000000


				8	Kevlar													Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	1"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Lightweight Aluminum Hardware, UV Resistant	8091T312	000000

Heat-Resistant Shock-Absorbing Fall-Arrest Lanyards with Anchor

Made of steel, these durable lanyards hold up in abrasive and high-heat applications. Attach the large snap hook directly to a rated structure, such as a scaffold or pipe, to create an anchor point. When used together with a harness, they help you meet OSHA and ANSI safety standards.

				Harness End Connection		Anchor End Connection
	Lg., ft.	Lg. After Fall, ft.	Material	Hardware	Material	Hardware	Material	Snap Hook Opening Size	Wt. Cap., lb.	Specs. Met		Each
Hook Over with 1 Anchor End Connection







				Heat Resistant, Shock Absorbing Wire Rope

				6	10	Steel	Snap Hook	Steel	Snap Hook	Steel	3/4", 2 1/2"	310	ANSI/ASSP Z359.13, ANSI/ASSP Z359.3, ASTM F887	8263T9	0000000

Heat-Resistant Shock-Absorbing Fall-Arrest Lanyards

1 Anchor End Connection

2 Anchor End Connections

Made of steel, these durable lanyards hold up in abrasive and high-heat applications. Use them in conjunction with a harness and an anchor for a complete fall-arrest system. When used properly, these lanyards help you meet OSHA and ANSI safety standards.

1 Anchor End Connection—Lanyards with 1 anchor end connection are best when you’re working in one location.

2 Anchor End Connections—Lanyards with 2 anchor end connections let you move between anchor points while staying safely tethered at all times. Attach to the new anchor point before disconnecting from the other anchor point.

				Harness End Connection		Anchor End Connection
	Lg., ft.	Lg. After Fall, ft.	Material	Hardware	Material	Hardware	Material	Snap Hook Opening Size	Wt. Cap., lb.	Specs. Met		Each
1 Anchor End Connection







				Heat Resistant, Shock Absorbing Wire Rope

				6	10	Steel	Snap Hook	Steel	Snap Hook	Steel	3/4"	310	ANSI/ASSP Z359.13, ANSI/ASSP Z359.3, ASTM F887	8263T6	0000000


				2 Anchor End Connections







								Heat Resistant, Shock Absorbing Wire Rope

								6	10	Steel	Snap Hook	Steel	Snap Hook	Steel	3/4"	310	ANSI/ASSP Z359.13, ANSI/ASSP Z359.3, ASTM F887	8263T7	000000

Electrical Arc-Flash-Resistant Shock-Absorbing Fall-Arrest Lanyards with Anchor

Made of Kevlar, these lanyards meet ASTM F887 when used with an arc-flash-resistant harness. Wrap the lanyard around a rated structure, such as an I-beam, and then attach it to itself to create an anchor point. Use them when working in a single location. When used together with a harness, they help you meet OSHA and ANSI safety standards.

				Harness End Connection		Anchor End Connection
	Lg., ft.	Lg. After Fall, ft.	Material	Hardware	Material	Hardware	Material	Snap Hook Opening Size	Wt. Cap., lb.	Specs. Met		Each
Wraparound with 1 Anchor End Connection







				Arc Flash Resistant, Shock Absorbing Webbing

				6	10	Kevlar	Snap Hook	Steel	Carabiner	Steel	7/8"	310	ANSI/ASSP Z359.13, ASTM F887, OSHA Compliant 29 CFR 1910.66, OSHA Compliant 29 CFR 1926.502	1785T13	0000000

Electrical Arc-Flash-Resistant Quick-Stop Retracting Fall-Arrest Lanyards

Made with a durable Kevlar webbing, these lanyards meet ASTM F887, so they're tested to hold up against arc flash hazards. They extend and retract as you move around, but with a sudden jerk, such as a fall, they immediately lock like a seat belt to stop you. They stop your fall within inches, unlike shock-absorbing lanyards that extend several feet. A built-in shock absorber reduces the jolt of the stop. When used together with a harness and anchor, these lanyards help you meet OSHA and ANSI safety standards.

Class 1—Use Class 1 lanyards when your anchor is at the same level as or above your D-ring.

Class 2—Class 2 lanyards are more versatile than Class 1 lanyards—use them when your anchor is above your D-ring, at the same level, or up to 5 ft. below. They meet safety standards to prevent fraying or breaking if you fall near a sharp edge.

				Harness End Connection		Anchor End Connection
	Lg., ft.	Material	Construction	Hardware	Material	Hardware	Material	Carabiner Opening Wd.	Snap Hook Opening Size	Housing Material	Wt. Cap., lb.	Specs. Met		Each
Class 1







				1 Anchor End Connection

				6	Kevlar	Webbing	Snap Hook	Steel	Carabiner with Swivel Eye	Steel	1"	13/16"	Plastic	310	ANSI/ASSP Z359.14, ASTM F887, OSHA Compliant 29 CFR 1926.502	9536N11	0000000


				Class 2







								1 Anchor End Connection

								8	Kevlar	Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	13/16"	Plastic	420	ANSI/ASSP Z359.14, ASTM F887, OSHA Compliant 29 CFR 1926.502	9536N12	000000

Electrical Arc-Flash-Resistant Shock-Absorbing Fall-Arrest Lanyards

Image of ProductInUse. Back orientation. Contains Annotated. Fall-Arrest Lanyards. Electrical Arc-Flash-Resistant Shock-Absorbing Fall-Arrest Lanyards.

1 Anchor End Connection

Image of Product. Front orientation. Fall-Arrest Lanyards. Electrical Arc-Flash-Resistant Shock-Absorbing Fall-Arrest Lanyards, 2 Anchor End Connections.

2 Anchor End Connections

Made of Kevlar, these lanyards meet ASTM F887 when used with an arc-flash-resistant harness. When used together with an anchor and harness, these lanyards help you meet OSHA and ANSI safety standards.

1 Anchor End Connection—Lanyards with 1 anchor end connection are for working in one location.

				Harness End Connection		Anchor End Connection
	Lg., ft.	Lg. After Fall, ft.	Material	Hardware	Material	Hardware	Material	Snap Hook Opening Size	Wt. Cap., lb.	Specs. Met		Each
1 Anchor End Connection







				Arc Flash Resistant, Shock Absorbing Webbing

				6	10	Kevlar	Snap Hook	Steel	Snap Hook	Steel	13/16"	310	ANSI/ASSP Z359.13, ASTM F887, OSHA Compliant 29 CFR 1910.66, OSHA Compliant 29 CFR 1926.502	1785T12	0000000


				2 Anchor End Connections







								Arc Flash Resistant, Shock Absorbing Webbing

								6	10	Kevlar	Snap Hook	Steel	Snap Hook	Steel	13/16"	310	ANSI/ASSP Z359.13, ASTM F887, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	1785T14	000000