With a maximum torque of at least 11,600 in.-lbs., these U-joints handle more torque than any other U-joint in our offering. They’re single U-joints, meaning they connect and transfer torque between shafts that are misaligned at an angle. Often found in continuously running applications, they operate at higher speeds and last longer than other types of joints, thanks to their needle bearings.

Connect these U-joints to shafts using the included set screws. Unlike U-joints that use spring pins, there’s no drilling required. All have a grease fitting, so you can use a grease gun to lubricate all of the bearings at once.

Your shafts’ misalignment will affect the speed and torque the U-joint will be able to transmit. The more the shafts are misaligned, the less speed and torque the U-joint will be able to transmit.

A good choice when you need accurate and repeatable motion, these U-joints have zero backlash (no play), so there’s no motion lost when your shafts change direction. This keeps machines running smoothly. They’re single U-joints, so they connect and transfer torque between shafts that are misaligned at an angle.

Your shafts’ misalignment will affect the speed and torque the U-joint will be able to transmit. The more the shafts are misaligned, the less speed and torque the U-joint will be able to transmit.

Lengthen and shorten these telescoping U-joints to fit your application. They’re a good choice when you need accurate and repeatable motion because they have zero backlash (no play), so there’s no motion lost when your shafts change direction. This keeps machines running smoothly. As double U-joints, they connect and transfer torque between two shafts that are either parallel to each other or are misaligned at an angle. They also keep parallel shafts moving in sync by making the output shaft move at the same rate as the input shaft. With ball bearings, there’s less friction than pin-and-block joints, so they run at higher speeds. Made of stainless steel, they balance strength without sacrificing corrosion resistance.

Since they come lubricated, you won’t need to lubricate them during installation. Drill holes through the U-joint and your shafts and then connect using spring pins.

Your shafts’ misalignment will affect the speed and torque the U-joint will be able to transmit. The more the shafts are misaligned, the less speed and torque the U-joint will be able to transmit.

To keep your shafts moving in sync, the flexible spring on these joints makes the output shaft move at the same rate as the input shaft. This spring also reduces vibration and compensates for more misalignment than standard single U-joints. However, these U-joints can’t handle as much torque. With zero backlash (no play), there’s no motion lost when you change direction. This keeps machines running smoothly with more accurate, repeatable motion. Made of stainless steel, these U-joints balance strength with good corrosion resistance.

A good choice for optical devices and other sensitive equipment, these U-joints don’t require lubrication or gather dust and debris. They’re also easier to maintain than lubricated U-joints. They work well in assemblies that change frequently because you can quickly loosen their clamping screw to move them. This screw holds these U-joints in place without damaging your shafts. Unlike U-joints that use spring pins, there’s no drilling required.

Your shafts’ misalignment will affect the speed and torque the U-joint will be able to transmit. The more the shafts are misaligned, the less speed and torque the U-joint will be able to transmit.

Connect and transfer torque between two shafts that are either parallel to each other or are misaligned at an angle. When shafts are parallel, these double U-joints keep them moving in sync by making the output shaft move at the same rate as the input shaft. They have a pin-and-block joint, so they handle higher torque at lower speeds than other joint types, making them a good choice for most applications. Made of steel, they are strong and withstand a good amount of torque.

To extend their life by keeping lubricant in and contaminants out, use the grooves on their body to add a cover (sometimes called bellows or boots). Drill holes through the U-joint and your shafts and then connect using spring pins.

Your shafts’ misalignment will affect the speed and torque the U-joint will be able to transmit. The more the shafts are misaligned, the less speed and torque the U-joint will be able to transmit.

Use these U-joints in wet environments to connect and transfer torque between two shafts. Made of 303 stainless steel, they balance strength with good corrosion resistance. They’re single U-joints, so they join shafts that are misaligned at an angle. With a pin-and-block joint, they handle higher torque at lower speeds than other joint types such as those with needle bearings, making them a good choice for most applications.

To extend their life by keeping lubricant in and contaminants out, use the grooves on their body to add a cover (sometimes called bellows or boots). Drill holes through the U-joint and your shafts and then connect using spring pins.

Your shafts' misalignment will affect the speed and torque the U-joint will be able to transmit. The more the shafts are misaligned, the less speed and torque the U-joint will be able to transmit.

Ideal for use in assemblies that change frequently, these U-joints have clamping screws that can be quickly loosened when you need to move them. These screws hold these U-joints in place without damaging your shafts, and unlike U-joints that use spring pins, there’s no drilling required. They’re single U-joints, so they connect and transfer torque between two shafts that are misaligned at an angle. With a pin-and-block joint, they handle higher torque at lower speeds than other joint types such as those with needle bearings, making them a good choice for most applications. Made of steel, they’re strong and handle a good amount of torque.

To extend their life by keeping lubricant in and contaminants out, use the grooves on their body to add a cover (sometimes called bellows or boots).

Your shafts' misalignment will affect the speed and torque the U-joint will be able to transmit. The more the shafts are misaligned, the less speed and torque the U-joint will be able to transmit.

Since these U-joints have zero backlash (no play), there’s no motion lost when your shafts change direction, so machines move smoothly with more accurate, repeatable motion. As double U-joints, they connect and transfer torque between two shafts that are either parallel to each other or are misaligned at an angle. They also keep parallel shafts moving in sync by making the output shaft move at the same rate as the input shaft. And because their ball bearings operate with less friction than pin-and-block joints, they run at higher speeds. Made of stainless steel, these U-joints balance strength with good corrosion resistance.

They come lubricated, so you won’t need to lubricate them during installation. Connect them to shafts using the included set screws. Unlike U-joints that use spring pins, there’s no drilling required.

Your shafts’ misalignment will affect the speed and torque the U-joint will be able to transmit. The more the shafts are misaligned, the less speed and torque the U-joint will be able to transmit.