We will reply to your message within an hour.
Also known as angle brackets.
Strengthen corners of cases and crates.
A rubber seal protects against moisture around the installation hole.
Clamp these brackets to panel edges to quickly assemble crates.
Machine holes and slots or weld in place.
Position proximity, photoelectric, and light beam sensors and switches.
Often used in washrooms, these brackets mount panels and partitions.
Fit brackets together to assemble truck racks, gates, crates, and fences.
The two-piece design accommodates a wide range of panel thicknesses.
Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.
These 90° angles are zinc galvanized for good corrosion resistance.
The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.
An anodized coating forms a bond with the aluminum surface to improve wear and corrosion resistance.
The outside of these 90° angles is polished to either a brushed finish or a mirror-like finish.
The anodized coating on these 90° angles forms a bond with the aluminum surface to improve wear and corrosion resistance.
More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.
Easier to bend and shape than 6061 aluminum, this aluminum is good for framing, cross sections, and structures in construction and marine industries.
5086 aluminum is used on ships, oil rigs, tanks, and pressure vessels because of its excellent saltwater resistance and formability.
While 2024 aluminum was initially designed for structural components in aircraft, it's now widely used when a high strength-to-weight ratio is needed. It offers similar performance to 7075 aluminum, but it’s not as strong.
Originally developed for aircraft frames, uses for 7075 aluminum now include a wide range of high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.
The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.
From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications.
Often called architectural bronze, 385 brass is easy to machine and has excellent formability when heated. It is typically used for handrails, ornamental trim, and hardware, such as hinges and lock bodies.
Connect T‐slotted rails and reinforce joints for structural stability.
Attach sensors, tubes, and other components to T-slotted framing rails and structures.
Pivots provide smooth motion at the junction between two T-slotted rails.
Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.
Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.
Push these brackets into strut channel and tighten the included cam screws for a partially concealed connection.
A tab on the end of these shelf brackets fits inside the strut channel for extra stability.
Half the weight of steel, this aluminum framing resists corrosion in wet environments.
Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this steel bolt-together framing to build guards, tables, and racks.
Build test fixtures, prototypes, and other small structures with this miniature version of T-slotted framing and fittings.
To provide corrosion resistance in wet environments, this framing is galvanized.
These shelf brackets have a 500-lb. capacity—twice the capacity of our other shelf brackets.
These brackets have greater weight capacities than standard duty fold-away shelf brackets.
These brackets allow you to lower your shelf 10 or 20 degrees.
Made from stainless steel for excellent corrosion resistance in damp environments.
Stainless steel that’s twice as thick as standard 90° angle ball stud mounting brackets makes these brackets good for high-force applications exposed to damp conditions.
Pair these 90° angle brackets with ball socket end fittings to mount your gas spring in almost any position.
About twice as thick as standard 90° angle ball stud mounting brackets, these brackets are suitable for high-force applications.
Made of easy-to-machine aluminum, these brackets come without mounting holes, so you can drill holes where you need them.
Pair these 90° angle offset-arm brackets with ball socket end fittings to mount your gas spring in almost any position.
Easy to machine, these brackets are made from aluminum—drill mounting holes where needed.
Pair these 30° angle brackets with ball socket end fittings to mount your gas spring in almost any position.
Made from stainless steel, these brackets resist corrosion in damp environments.
Fasten these brackets to ceilings, walls, beams, and joists to hang threaded rod.
Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.
Made of PVC Type 2 plastic, these 90° angles resist impact and chemicals.
Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.
In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.
Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.
Because PVC resists acids and alkalies, it is often used in tanks and chemical-processing applications where visibility is essential.
At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's commonly known as Lexan, Hyzod, Tuffak, and Makrolon.
Add components such as clamps, brackets, stops, rests, mounting plates, fixturing squares, risers, and V-blocks to build fixtures for welding and assembly.
Lighter than aluminum while remaining rigid, these angles are often used as brackets in structural framing, machinery, and robotics.
A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94V0 for flame retardance.
Machine these angles into arc barriers, switch mounts, and components for circuit breakers and electrical equipment. They resist carrying electric currents in dry or humid areas, even when exposed to sudden electric discharge.