94475A248 | Vibration-Resistant Wedge Anchor for Concrete

Filter by

System of Measurement

Diameter

Length

Anchor Type

Material

Thread Size

Screw Size

For Use In

Finish

Hot-Dipped Galvanized

Zinc Plated

Zinc Yellow-Chromate Plated

Thread Length

Drill Bit Size

Connection Hardware

Performance

Fastener Head Type

Minimum Installation Depth

Ultimate Pull-Out Strength

Ultimate Shear Strength

Conditions Tested In

Drive Style

DFARS Specialty Metals

REACH

Export Control Classification Number (ECCN)

EAR99

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

RoHS

Compliant

Compliant with Exemptions

Not Compliant

Thread Type

Coil

UNC

Drill Bit Decimal Size Equivalent

970 Products

Wedge Anchors for Concrete

Secure junction boxes, safety railings, and structural beams in concrete floors. These anchors have a wedge-shaped base that expands against the hole’s sides, forming a tight grip that withstands high pull-out forces. Since the grip is focused at the base, these anchors are best suited for concrete, which can handle the gripping pressure better than softer block and brick. However, they require holes that match the anchors' diameter exactly to achieve their pull-out strength, making them more difficult to install than sleeve anchors.

To install, drive the anchor through your component into a drilled hole until the washer and nut meet the surface. Then, tighten the nut to expand the anchor base. Remove your component by unfastening the nut, but the anchor itself cannot be removed.

Zinc-Plated Steel and Zinc-Yellow-Chromate-Plated Steel—The most common choice for areas with occasional exposure to moisture.

Corrosion-Resistant Galvanized Steel—Combine the strength of steel with the rust resistance of stainless steel. These anchors are an economical alternative to 18-8 stainless steel in wet and outdoor environments, but they’ll corrode or pit when exposed to salt water and chemicals.

Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these anchors resist rust. However, they’ll corrode or pit when exposed to salt water and chemicals.

Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these anchors won't degrade when exposed to harsh weather, salt water, and most chemicals.

						Ultimate Strength, lbf					Each		Package
	Lg.	Thread Size	Min. Thread Lg.	Min. Installation Dp.	Drill Bit Size	Pull-Out	Shear	Conditions Tested In	Installation Torque, ft·lbf	Certification		Each	Pkg. Qty.		Pkg.
Zinc-Plated Steel







				1/4" Diameter

				1 3/4"	1/4"-20	3/4"	1 1/4"	1/4"	1,884	1,260	4,000 psi Concrete	4	ICC-ES Listed	91578A103	00000	100	91578A812	000000


				2 1/4"	1/4"-20	1 1/4"	1 1/4"	1/4"	1,884	1,260	4,000 psi Concrete	4	ICC-ES Listed	91578A104	0000	100	91578A814	00000
				3 1/4"	1/4"-20	2 1/4"	1 1/4"	1/4"	1,884	1,260	4,000 psi Concrete	4	ICC-ES Listed	91578A105	0000	100	91578A816	00000




						3/8" Diameter

						2 1/4"	3/8"-16	7/8"	1 3/4"	3/8"	3,320	2,540	4,000 psi Concrete	20	FM Approved, ICC-ES Listed	91578A106	0000	50	91578A818	00000


						2 3/4"	3/8"-16	1 3/8"	1 3/4"	3/8"	3,320	2,540	4,000 psi Concrete	20	FM Approved, ICC-ES Listed	91578A107	0000	50	91578A821	00000
						3"	3/8"-16	1 5/8"	1 3/4"	3/8"	3,320	2,540	4,000 psi Concrete	20	FM Approved, ICC-ES Listed	91578A108	0000	50	91578A823	00000
						3 1/2"	3/8"-16	2 1/8"	1 3/4"	3/8"	3,320	2,540	4,000 psi Concrete	20	FM Approved, ICC-ES Listed	91578A109	0000	50	91578A825	00000
						3 3/4"	3/8"-16	2 3/8"	1 3/4"	3/8"	3,320	2,540	4,000 psi Concrete	20	FM Approved, ICC-ES Listed	91578A112	0000	50	91578A827	00000
						5"	3/8"-16	3 5/8"	1 3/4"	3/8"	3,320	2,540	4,000 psi Concrete	20	FM Approved, ICC-ES Listed	91578A113	0000	50	91578A829	00000
						7"	3/8"-16	4 1/2"	1 3/4"	3/8"	5,180	3,340	4,000 psi Concrete	30	FM Approved, UL Listed, ICC-ES Listed	91578A670	0000	10	91578A717	00000




								1/2" Diameter

								2 3/4"	1/2"-13	1"	2 1/4"	1/2"	4,800	4,200	4,000 psi Concrete	40	ICC-ES Listed	91578A115	0000	50	91578A832	00000


								3 3/4"	1/2"-13	2"	2 1/4"	1/2"	4,800	4,200	4,000 psi Concrete	40	FM Approved, UL Listed, ICC-ES Listed	91578A116	0000	50	91578A834	00000
								4 1/2"	1/2"-13	2 3/4"	2 1/4"	1/2"	4,800	4,200	4,000 psi Concrete	40	FM Approved, UL Listed, ICC-ES Listed	91578A117	0000	50	91578A836	00000
								5 1/2"	1/2"-13	3 3/4"	2 1/4"	1/2"	4,800	4,200	4,000 psi Concrete	40	FM Approved, UL Listed, ICC-ES Listed	91578A118	0000	25	91578A838	00000
								7"	1/2"-13	5 1/4"	2 1/4"	1/2"	4,800	4,200	4,000 psi Concrete	40	FM Approved, UL Listed, ICC-ES Listed	91578A119	0000	25	91578A841	00000
								8 1/2"	1/2"-13	6"	2 3/4"	1/2"	8,500	10,240	4,000 psi Concrete	60	FM Approved, UL Listed, ICC-ES Listed	91578A309	0000	10	91578A996	00000




										5/8" Diameter

										3 1/2"	5/8"-11	1 1/2"	2 3/4"	5/8"	6,280	6,820	4,000 psi Concrete	80	ICC-ES Listed	91578A206	0000	25	91578A843	00000


										4 1/2"	5/8"-11	2 1/2"	2 3/4"	5/8"	6,280	6,820	4,000 psi Concrete	80	ICC-ES Listed	91578A207	0000	25	91578A845	00000
										5"	5/8"-11	3"	2 3/4"	5/8"	6,280	6,820	4,000 psi Concrete	80	ICC-ES Listed	91578A208	0000	25	91578A847	00000
										6"	5/8"-11	4"	2 3/4"	5/8"	6,280	6,820	4,000 psi Concrete	80	ICC-ES Listed	91578A209	0000	10	91578A849	00000
										7"	5/8"-11	5"	2 3/4"	5/8"	6,280	6,820	4,000 psi Concrete	80	ICC-ES Listed	91578A211	0000	10	91578A852	00000
										8 1/2"	5/8"-11	6 1/2"	2 3/4"	5/8"	6,280	6,820	4,000 psi Concrete	80	ICC-ES Listed	91578A212	0000	10	91578A854	00000
										10"	5/8"-11	6"	3 3/8"	5/8"	12,840	20,500	4,000 psi Concrete	90	FM Approved, UL Listed, ICC-ES Listed	91578A411	0000	4	91578A995	00000
										12"	5/8"-11	2"	2 3/4"	5/8"	12,840	20,500	4,000 psi Concrete	90	FM Approved, UL Listed, ICC-ES Listed	91578A718	0000	4	91578A979	00000




												3/4" Diameter

4 1/4"	3/4"-10											1 3/4"	3 3/4"	3/4"	10,868	12,580	4,000 psi Concrete	110	ICC-ES Listed	91578A213	0000	20	91578A856	00000


4 3/4"	3/4"-10											2 1/4"	3 3/4"	3/4"	10,868	12,580	4,000 psi Concrete	110	ICC-ES Listed	91578A216	0000	20	91578A858	00000
5 1/2"	3/4"-10	3"										3 3/4"	3/4"	10,868	12,580	4,000 psi Concrete	110	ICC-ES Listed	91578A217	0000	20	91578A861	00000
6 1/4"	3/4"-10	3 3/4"	3 3/4"									3/4"	10,868	12,580	4,000 psi Concrete	110	ICC-ES Listed	91578A218	0000	10	91578A863	00000
7"	3/4"-10	4 1/2"	3 3/4"									3/4"	10,868	12,580	4,000 psi Concrete	110	ICC-ES Listed	91578A219	0000	10	91578A865	00000
8 1/2"	3/4"-10	6"	3 3/4"									3/4"	10,868	12,580	4,000 psi Concrete	110	ICC-ES Listed	91578A220	0000	10	91578A867	00000
10"	3/4"-10	6"	4 1/8"									3/4"	16,720	26,900	4,000 psi Concrete	150	FM Approved, UL Listed, ICC-ES Listed	91578A487	0000	4	91578A559	00000
12"	3/4"-10	9 1/2"	3 3/4"									3/4"	10,868	12,580	4,000 psi Concrete	110	ICC-ES Listed	91578A221	0000	4	91578A869	00000




		7/8" Diameter

		6"	7/8"-9	2 3/4"								4"	7/8"	12,272	11,700	4,000 psi Concrete	175	ICC-ES Listed	91578A223	0000	10	91578A872	00000


		8"	7/8"-9	4 3/4"	4"							7/8"	12,272	11,700	4,000 psi Concrete	175	ICC-ES Listed	91578A224	0000	4	91578A874	00000
		10"	7/8"-9	6 1/2"	4"							7/8"	12,272	11,700	4,000 psi Concrete	175	ICC-ES Listed	91578A226	00000	4	91578A878	00000




				1" Diameter

				6"	1"-8							4 1/2"	4 1/2"	1"	15,680	21,160	4,000 psi Concrete	225	FM Approved, UL Listed, ICC-ES Listed	91578A730	00000	10	91578A731	00000


				9"	1"-8							5"	4 1/2"	1"	15,680	21,160	4,000 psi Concrete	225	ICC-ES Listed	91578A259	00000	10	91578A423	000000
				12"	1"-8							8 3/4"	4 1/2"	1"	15,680	21,160	4,000 psi Concrete	225	ICC-ES Listed	91578A227	00000	4	91578A881	00000




						1 1/4" Diameter

						9"	1 1/4"-7					4 3/4"	5 5/8"	1 1/4"	24,028	29,100	4,000 psi Concrete	375	ICC-ES Listed	91578A228	00000	4	91578A883	00000


						12"	1 1/4"-7					7 3/4"	5 5/8"	1 1/4"	24,028	29,100	4,000 psi Concrete	375	ICC-ES Listed	91578A229	00000	4	91578A885	00000


						Zinc-Yellow-Chromate-Plated Steel







												1/4" Diameter

												1 3/4"	1/4"-20	7/8"	1 1/4"	1/4"	1,012	1,472	4,000 psi Concrete	10	ICC-ES Listed	98880A110	0000	50	98880A111	00000


												2 1/4"	1/4"-20	1 3/8"	1 1/4"	1/4"	1,012	1,472	4,000 psi Concrete	10	ICC-ES Listed	98880A130	0000	50	98880A112	00000
												3 1/4"	1/4"-20	2 1/4"	1 1/4"	1/4"	1,012	1,472	4,000 psi Concrete	10	ICC-ES Listed	98880A150	0000	50	98880A113	00000




														3/8" Diameter

										2 1/4"	3/8"-16			1 3/16"	1 3/4"	3/8"	2,364	3,148	4,000 psi Concrete	30	ICC-ES Listed	98880A210	0000	50	98880A114	00000


										3"	3/8"-16			1 7/8"	1 3/4"	3/8"	2,364	3,148	4,000 psi Concrete	30	ICC-ES Listed	98880A230	0000	50	98880A115	00000
										3 3/4"	3/8"-16			2 5/8"	1 3/4"	3/8"	2,364	3,148	4,000 psi Concrete	30	ICC-ES Listed	98880A250	0000	50	98880A116	000000
										5"	3/8"-16			4"	1 3/4"	3/8"	2,364	3,148	4,000 psi Concrete	30	ICC-ES Listed	98880A270	0000	50	98880A117	000000
										7"	3/8"-16			3"	1 5/8"	3/8"	2,364	3,148	4,000 psi Concrete	20	ICC-ES Listed	———	0	10	98880A211	00000




1/2" Diameter

2 3/4"	1/2"-13													1 1/2"	2 1/4"	1/2"	5,068	6,828	4,000 psi Concrete	50	ICC-ES Listed	98880A311	0000	25	98880A118	00000


3 3/4"	1/2"-13													2 1/2"	2 1/4"	1/2"	5,068	6,828	4,000 psi Concrete	50	ICC-ES Listed	98880A212	0000	25	98880A213	00000
4 1/4"	1/2"-13													3"	2 1/4"	1/2"	5,068	6,828	4,000 psi Concrete	50	ICC-ES Listed	98880A331	0000	25	98880A119	00000
5 1/2"	1/2"-13													4"	2 1/4"	1/2"	5,068	6,828	4,000 psi Concrete	50	ICC-ES Listed	98880A351	0000	25	98880A120	00000
7"	1/2"-13													1 1/4"	2 1/4"	1/2"	5,068	6,828	4,000 psi Concrete	50	ICC-ES Listed	98880A371	0000	25	98880A121	000000
8 1/2"	1/2"-13													4"	2 1/4"	1/2"	5,068	6,828	4,000 psi Concrete	50	ICC-ES Listed	———	0	10	98880A214	000000




		5/8" Diameter

		3 1/2"	5/8"-11											1 5/8"	2 3/4"	5/8"	5,556	9,656	4,000 psi Concrete	75	ICC-ES Listed	98880A411	0000	10	98880A122	00000


		4 1/2"	5/8"-11											2 5/8"	2 3/4"	5/8"	5,556	9,656	4,000 psi Concrete	75	ICC-ES Listed	98880A421	0000	10	98880A123	00000
		5"	5/8"-11											3 1/4"	2 3/4"	5/8"	5,556	9,656	4,000 psi Concrete	75	ICC-ES Listed	98880A431	0000	10	98880A124	00000
		6"	5/8"-11											4 1/8"	2 3/4"	5/8"	5,556	9,656	4,000 psi Concrete	75	ICC-ES Listed	98880A451	0000	10	98880A125	00000
		8 1/2"	5/8"-11											1 1/2"	2 3/4"	5/8"	5,556	9,656	4,000 psi Concrete	75	ICC-ES Listed	98880A491	00000	10	98880A126	00000




				3/4" Diameter

				4 1/4"	3/4"-10									2 3/8"	3 3/4"	3/4"	11,972	15,124	4,000 psi Concrete	200	ICC-ES Listed	98880A510	0000	10	98880A127	00000


				5 1/2"	3/4"-10									3 5/8"	3 3/4"	3/4"	11,972	15,124	4,000 psi Concrete	200	ICC-ES Listed	98880A540	00000	10	98880A128	00000
				6 1/4"	3/4"-10									4 1/4"	3 3/4"	3/4"	11,972	15,124	4,000 psi Concrete	200	ICC-ES Listed	98880A560	00000	10	98880A129	00000
				7"	3/4"-10									2"	3 3/4"	3/4"	11,972	15,124	4,000 psi Concrete	200	ICC-ES Listed	98880A570	00000	10	98880A131	000000
				8 1/2"	3/4"-10									2"	3 3/4"	3/4"	11,972	15,124	4,000 psi Concrete	200	ICC-ES Listed	98880A580	00000	10	98880A132	000000
				10"	3/4"-10	2"								3 3/4"	3/4"	11,972	15,124	4,000 psi Concrete	200	ICC-ES Listed	98880A590	00000	10	98880A133	000000




						7/8" Diameter

						6"	7/8"-9	2 1/4"	4"					7/8"	13,900	21,572	4,000 psi Concrete	225	ICC-ES Listed	98880A630	00000	10	98880A134	000000


						8"	7/8"-9	2 1/4"	4"					7/8"	13,900	21,572	4,000 psi Concrete	225	ICC-ES Listed	98880A650	00000	4	98880A135	00000
						10"	7/8"-9	2 1/4"	4"					7/8"	13,900	21,572	4,000 psi Concrete	225	ICC-ES Listed	98880A670	00000	4	98880A136	00000




								1" Diameter

								6"	1"-8			2 1/4"		4 1/2"	1"	15,828	28,020	4,000 psi Concrete	250	ICC-ES Listed	98880A740	00000	4	98880A137	00000


								9"	1"-8			2 1/4"	4 1/2"	1"	15,828	28,020	4,000 psi Concrete	250	ICC-ES Listed	98880A780	00000	4	98880A138	00000


								Corrosion-Resistant Galvanized Steel







										1/4" Diameter

										1 3/4"	1/4"-20			5/8"	1 1/4"	1/4"	1,680	2,520	4,000 psi Concrete	8	—	97110A100	0000	100	97110A611	00000


										2 1/4"	1/4"-20			1 1/8"	1 1/4"	1/4"	1,680	2,520	4,000 psi Concrete	8	—	97110A101	0000	100	97110A612	00000
										3 1/4"	1/4"-20			2 1/8"	1 1/4"	1/4"	1,680	2,520	4,000 psi Concrete	8	—	97110A102	0000	100	97110A613	00000




										3/8" Diameter

										2 1/4"	3/8"-16			7/8"	1 3/4"	3/8"	3,880	3,920	4,000 psi Concrete	25	—	97110A200	0000	50	97110A614	00000


										2 3/4"	3/8"-16			1 3/8"	1 3/4"	3/8"	3,880	3,920	4,000 psi Concrete	25	—	97110A201	0000	50	97110A615	00000
										3"	3/8"-16			1 5/8"	1 3/4"	3/8"	3,880	3,920	4,000 psi Concrete	25	—	97110A204	0000	50	97110A617	00000
										3 3/4"	3/8"-16			2 3/8"	1 3/4"	3/8"	3,880	3,920	4,000 psi Concrete	25	—	97110A222	0000	50	97110A618	00000
										5"	3/8"-16			3 1/8"	1 3/4"	3/8"	3,880	3,920	4,000 psi Concrete	25	—	97110A203	0000	50	97110A616	00000
										7"	3/8"-16			4 1/2"	1 3/4"	3/8"	3,880	3,920	4,000 psi Concrete	25	—	97110A231	0000	10	97110A619	00000




										1/2" Diameter

										2 3/4"	1/2"-13			1"	2 1/4"	1/2"	6,320	6,920	4,000 psi Concrete	55	—	97110A300	0000	25	97110A621	00000


										3 3/4"	1/2"-13			2"	2 1/4"	1/2"	6,320	6,920	4,000 psi Concrete	55	—	97110A301	0000	25	97110A622	00000
										4 1/4"	1/2"-13			3"	2 1/4"	1/2"	5,068	6,828	4,000 psi Concrete	50	—	97110A112	0000	25	97110A113	00000
										5 1/2"	1/2"-13			3 5/8"	2 1/4"	1/2"	6,320	6,920	4,000 psi Concrete	55	—	97110A302	0000	25	97110A623	00000
										7"	1/2"-13			4 3/8"	2 1/4"	1/2"	6,320	6,920	4,000 psi Concrete	55	—	97110A303	0000	25	97110A624	00000
										8 1/2"	1/2"-13			2"	2 1/4"	1/2"	6,320	6,920	4,000 psi Concrete	55	—	97110A304	0000	10	97110A625	00000




										5/8" Diameter

										3 1/2"	5/8"-11			1 3/8"	2 3/4"	5/8"	9,760	11,960	4,000 psi Concrete	95	—	97110A400	0000	10	97110A626	00000


										4 1/2"	5/8"-11			2"	2 3/4"	5/8"	9,760	11,960	4,000 psi Concrete	95	—	97110A401	0000	10	97110A627	00000
										5"	5/8"-11			3"	2 3/4"	5/8"	9,760	11,960	4,000 psi Concrete	95	—	97110A454	0000	10	97110A631	00000
						6"				5/8"-11	3 7/8"			2 3/4"	5/8"	9,760	11,960	4,000 psi Concrete	95	—	97110A452	0000	10	97110A629	00000
						7"	5/8"-11			3 1/2"	2 3/4"			5/8"	9,760	11,960	4,000 psi Concrete	95	—	97110A455	0000	10	97110A632	00000
						8 1/2"	5/8"-11			4 7/8"	2 3/4"			5/8"	9,760	11,960	4,000 psi Concrete	95	—	97110A456	0000	10	97110A633	00000
						10"	5/8"-11			2"	2 3/4"			5/8"	9,760	11,960	4,000 psi Concrete	95	—	97110A411	00000	10	97110A628	00000




										3/4" Diameter

										4 1/4"	3/4"-10			1 3/4"	3 3/4"	3/4"	13,160	15,880	4,000 psi Concrete	175	—	97110A500	0000	10	97110A635	00000


								4 3/4"	3/4"-10	2 1/4"	3 3/4"			3/4"	13,160	15,880	4,000 psi Concrete	175	—	97110A554	0000	10	97110A642	00000
								5 1/2"	3/4"-10	3"	3 3/4"			3/4"	13,160	15,880	4,000 psi Concrete	175	—	97110A501	0000	10	97110A636	00000
								6 1/4"	3/4"-10	3 5/8"	3 3/4"			3/4"	13,160	15,880	4,000 psi Concrete	175	—	97110A555	0000	10	97110A643	00000
								7"	3/4"-10	4 3/8"	3 3/4"			3/4"	13,160	15,880	4,000 psi Concrete	175	—	97110A502	00000	10	97110A637	00000
								8 1/2"	3/4"-10	2 1/4"	3 3/4"			3/4"	13,160	15,880	4,000 psi Concrete	175	—	97110A503	00000	4	97110A638	00000
								10"	3/4"-10	2 1/4"	3 3/4"			3/4"	13,160	15,880	4,000 psi Concrete	175	—	97110A504	00000	4	97110A639	00000
								12"	3/4"-10	2 1/4"	3 3/4"			3/4"	13,160	15,880	4,000 psi Concrete	175	—	97110A506	00000	4	97110A641	00000




										7/8" Diameter

										6"	7/8"-9	2 1/8"	4"	7/8"	16,600	32,520	4,000 psi Concrete	250	—	97110A600	00000	4	97110A644	00000


8"	7/8"-9									2 1/8"	4"	7/8"	16,600	32,520	4,000 psi Concrete	250	—	97110A601	00000	4	97110A645	00000
10"	7/8"-9									2 1/8"	4"	7/8"	16,600	32,520	4,000 psi Concrete	250	—	97110A602	00000	4	97110A646	00000




										1" Diameter

										6"	1"-8	2 1/4"	4"	1"	20,400	32,492	4,000 psi Concrete	300	—	97110A700	00000	4	97110A647	00000


										9"	1"-8	2 1/4"	4"	1"	20,400	32,492	4,000 psi Concrete	300	—	97110A701	00000	4	97110A648	00000
		12"								1"-8	2 1/4"	4"	1"	20,400	32,492	4,000 psi Concrete	300	—	97110A702	00000	4	97110A649	00000




										1 1/4" Diameter

										9"	1 1/4"-7	2 3/4"	5 5/8"	1 1/4"	28,760	47,000	4,000 psi Concrete	400	—	97110A805	00000	4	97110A651	000000


										12"	1 1/4"-7	2 3/4"	5 5/8"	1 1/4"	28,760	47,000	4,000 psi Concrete	400	—	97110A808	00000	4	97110A652	000000


										Corrosion-Resistant 18-8 Stainless Steel







												1/4" Diameter

												1 3/4"	1/4"-20	5/8"	1 1/4"	1/4"	840	1,000	4,000 psi Concrete	8	—	92188A100	0000	20	92188A112	00000


												2 1/4"	1/4"-20	1 1/8"	1 1/4"	1/4"	840	1,000	4,000 psi Concrete	8	—	92188A101	0000	20	92188A114	00000
												3 1/4"	1/4"-20	2 1/8"	1 1/4"	1/4"	840	1,000	4,000 psi Concrete	8	—	92188A102	0000	20	92188A116	00000




												3/8" Diameter

												2 1/4"	3/8"-16	1 1/8"	1 7/8"	3/8"	4,400	5,200	4,000 psi Concrete	30	FM Approved, UL Listed	92188A362	0000	20	92188A361	00000


												2 3/4"	3/8"-16	1 3/8"	1 7/8"	3/8"	4,720	5,580	4,000 psi Concrete	30	FM Approved, UL Listed	92188A713	0000	20	92188A712	00000
												3"	3/8"-16	1 5/8"	1 7/8"	3/8"	4,720	5,580	4,000 psi Concrete	30	FM Approved, UL Listed, ICC-ES Listed	92188A432	0000	20	92188A431	00000
												3 1/2"	3/8"-16	2.09"	1 7/8"	3/8"	4,720	5,580	4,000 psi Concrete	30	FM Approved, UL Listed	92188A911	0000	20	92188A912	00000
												3 3/4"	3/8"-16	2 3/8"	1 7/8"	3/8"	4,720	5,580	4,000 psi Concrete	30	FM Approved, UL Listed	92188A223	0000	20	92188A229	00000
												5"	3/8"-16	3 1/2"	1 7/8"	3/8"	4,720	5,560	4,000 psi Concrete	30	FM Approved, UL Listed	92188A823	0000	10	92188A595	00000
												7"	3/8"-16	5 5/8"	1 7/8"	3/8"	4,400	5,200	4,000 psi Concrete	30	FM Approved, UL Listed	92188A372	0000	10	92188A371	00000




												1/2" Diameter

												2 3/4"	1/2"-13	1 1/4"	2 1/4"	1/2"	7,580	10,240	4,000 psi Concrete	65	—	92188A921	0000	10	92188A922	00000


												3 3/4"	1/2"-13	2"	2 3/4"	1/2"	7,200	10,000	4,000 psi Concrete	65	FM Approved, UL Listed	92188A382	0000	10	92188A381	00000
												4 1/2"	1/2"-13	3 1/8"	2 1/4"	1/2"	4,400	4,800	4,000 psi Concrete	60	FM Approved, UL Listed	92188A306	0000	10	92188A145	00000
												5 1/2"	1/2"-13	3 3/4"	2 3/4"	1/2"	7,580	10,240	4,000 psi Concrete	65	FM Approved, UL Listed	92188A702	0000	10	92188A701	00000
												7"	1/2"-13	5 1/4"	2 3/4"	1/2"	7,560	10,240	4,000 psi Concrete	60	FM Approved, UL Listed	92188A342	0000	4	92188A343	00000
8 1/2"												1/2"-13	6"	2 3/4"	1/2"	7,580	10,240	4,000 psi Concrete	65	FM Approved, UL Listed	92188A705	00000	4	92188A704	00000




												5/8" Diameter

												3 1/2"	5/8"-11	1 3/8"	2 3/4"	5/8"	5,200	8,000	4,000 psi Concrete	90	—	92188A400	00000	10	92188A147	000000


												4 1/2"	5/8"-11	2"	2 3/4"	5/8"	5,200	8,000	4,000 psi Concrete	90	—	92188A401	00000	10	92188A149	000000
		5"										5/8"-11	3 1/2"	2 3/4"	5/8"	5,200	8,000	4,000 psi Concrete	90	FM Approved, UL Listed	92188A454	00000	10	92188A158	000000
		6"	5/8"-11									4 1/2"	2 3/4"	5/8"	5,200	8,000	4,000 psi Concrete	90	FM Approved, UL Listed	92188A452	00000	10	92188A156	000000
		7"	5/8"-11									3 1/2"	2 3/4"	5/8"	5,200	8,000	4,000 psi Concrete	90	—	92188A405	00000	4	92188A152	00000
		8 1/2"	5/8"-11									7"	2 3/4"	5/8"	5,200	8,000	4,000 psi Concrete	90	FM Approved, UL Listed	92188A456	00000	4	92188A161	00000
		10"	5/8"-11									2"	2 3/4"	5/8"	5,200	8,000	4,000 psi Concrete	90	—	92188A411	00000	4	92188A154	00000
		12"	5/8"-11									2"	2 3/4"	5/8"	5,200	8,000	4,000 psi Concrete	90	—	92188A462	00000	4	92188A163	00000




												3/4" Diameter

				4 3/4"	3/4"-10							2.53"	4 1/8"	3/4"	17,320	27,940	4,000 psi Concrete	150	FM Approved	92188A931	00000	4	92188A932	00000


				5 1/2"	3/4"-10							3.09"	4 1/8"	3/4"	17,320	27,940	4,000 psi Concrete	150	FM Approved, UL Listed	92188A941	00000	4	92188A942	00000
				6 1/4"	3/4"-10					3 3/4"		4 1/8"	3/4"	17,320	27,940	4,000 psi Concrete	150	FM Approved, UL Listed	92188A708	00000	4	92188A707	00000
				7"	3/4"-10					4.59"	4 1/8"	3/4"	17,320	27,940	4,000 psi Concrete	150	FM Approved, UL Listed	92188A951	00000	4	92188A952	00000
				8 1/2"	3/4"-10					6"	4 1/8"	3/4"	17,320	27,940	4,000 psi Concrete	150	FM Approved, UL Listed	92188A422	00000	4	92188A421	00000
				12"	3/4"-10					2 1/4"	3 3/4"	3/4"	8,800	11,200	4,000 psi Concrete	150	—	92188A560	00000	4	92188A181	000000




										7/8" Diameter

										8"	7/8"-9	4 3/4"	4"	7/8"	9,600	15,600	4,000 psi Concrete	250	FM Approved, UL Listed	92188A570	00000	4	92188A185	000000




										1" Diameter

										6"	1"-8	2 3/8"	4 1/2"	1"	13,600	20,800	4,000 psi Concrete	300	FM Approved, UL Listed	92188A601	00000	4	92188A189	000000


										9"	1"-8	5 3/8"	4 1/2"	1"	13,600	20,800	4,000 psi Concrete	300	FM Approved, UL Listed	92188A602	00000	4	92188A192	000000
										12"	1"-8	8 3/8"	4 1/2"	1"	13,600	20,800	4,000 psi Concrete	300	FM Approved, UL Listed	92188A605	00000	4	92188A194	000000


										Highly Corrosion-Resistant 316 Stainless Steel







												1/4" Diameter

												1 3/4"	1/4"-20	3/4"	1 1/4"	1/4"	840	1,000	4,000 psi Concrete	8	—	97799A100	0000	20	97799A111	00000


												2 1/4"	1/4"-20	1 1/4"	1 1/4"	1/4"	840	1,000	4,000 psi Concrete	8	—	97799A101	0000	20	97799A112	00000
												3 1/4"	1/4"-20	2 1/8"	1 1/4"	1/4"	840	1,000	4,000 psi Concrete	10	—	97799A102	0000	20	97799A113	00000




												3/8" Diameter

												2 1/4"	3/8"-16	7/8"	1 3/4"	3/8"	2,280	2,200	4,000 psi Concrete	30	FM Approved, UL Listed	97799A200	0000	20	97799A114	00000


												2 3/4"	3/8"-16	1 3/8"	1 3/4"	3/8"	2,280	2,200	4,000 psi Concrete	30	FM Approved, UL Listed	97799A201	0000	20	97799A115	00000
												3"	3/8"-16	1 5/8"	1 3/4"	3/8"	2,280	2,200	4,000 psi Concrete	30	FM Approved, UL Listed	97799A205	0000	20	97799A118	00000
												3 1/2"	3/8"-16	2 1/8"	1 3/4"	3/8"	2,280	2,200	4,000 psi Concrete	30	FM Approved, UL Listed	97799A202	0000	20	97799A116	00000
												3 3/4"	3/8"-16	2 3/8"	1 3/4"	3/8"	2,280	2,200	4,000 psi Concrete	30	FM Approved, UL Listed	97799A222	0000	20	97799A211	00000
												5"	3/8"-16	3 1/8"	1 3/4"	3/8"	2,280	2,200	4,000 psi Concrete	30	FM Approved, UL Listed	97799A203	0000	10	97799A117	00000
												7"	3/8"-16	4 1/2"	1 3/4"	3/8"	2,280	2,200	4,000 psi Concrete	30	FM Approved, UL Listed	97799A220	00000	10	97799A119	00000




												1/2" Diameter

												2 3/4"	1/2"-13	1"	2 1/4"	1/2"	4,400	4,800	4,000 psi Concrete	50	FM Approved, UL Listed	97799A300	00000	10	97799A212	00000


												3 3/4"	1/2"-13	2"	2 1/4"	1/2"	4,400	4,800	4,000 psi Concrete	50	FM Approved, UL Listed	97799A301	00000	10	97799A213	000000
												4 1/2"	1/2"-13	3 1/8"	2 1/4"	1/2"	4,400	4,800	4,000 psi Concrete	60	FM Approved, UL Listed	97799A306	00000	10	97799A217	000000
												5 1/2"	1/2"-13	3 5/8"	2 1/4"	1/2"	4,400	4,800	4,000 psi Concrete	50	FM Approved, UL Listed	97799A302	00000	10	97799A214	000000
												7"	1/2"-13	4 3/8"	2 1/4"	1/2"	4,400	4,800	4,000 psi Concrete	50	FM Approved, UL Listed	97799A303	00000	4	97799A215	00000
												8 1/2"	1/2"-13	2"	2 1/4"	1/2"	4,400	4,800	4,000 psi Concrete	50	FM Approved, UL Listed	97799A304	00000	4	97799A216	000000




												5/8" Diameter

												3 1/2"	5/8"-11	2"	2 3/4"	5/8"	5,200	8,000	4,000 psi Concrete	90	FM Approved, UL Listed	97799A400	00000	10	97799A218	000000


						4 1/2"						5/8"-11	2"	2 3/4"	5/8"	5,200	8,000	4,000 psi Concrete	75	FM Approved, UL Listed	97799A401	00000	10	97799A219	000000
						5"	5/8"-11					3"	2 3/4"	5/8"	5,200	8,000	4,000 psi Concrete	75	FM Approved, UL Listed	97799A444	00000	10	97799A312	000000
						6"	5/8"-11					4 1/2"	2 3/4"	5/8"	5,200	8,000	4,000 psi Concrete	90	FM Approved, UL Listed	97799A452	00000	10	97799A313	000000
						7"	5/8"-11					5 1/2"	2 3/4"	5/8"	5,200	8,000	4,000 psi Concrete	90	FM Approved, UL Listed	97799A455	00000	4	97799A315	00000
						8 1/2"	5/8"-11					7"	2 3/4"	5/8"	5,200	8,000	4,000 psi Concrete	90	FM Approved, UL Listed	97799A454	00000	4	97799A314	000000
						10"	5/8"-11					2"	2 3/4"	5/8"	5,200	8,000	4,000 psi Concrete	75	FM Approved, UL Listed	97799A411	00000	4	97799A311	000000
						12"	5/8"-11					2"	2 3/4"	5/8"	5,200	8,000	4,000 psi Concrete	75	FM Approved, UL Listed	97799A462	00000	4	97799A316	000000




												3/4" Diameter

								4 1/4"		3/4"-10		1 3/4"	3 3/4"	3/4"	8,800	11,200	4,000 psi Concrete	200	FM Approved, UL Listed	97799A555	00000	4	97799A423	000000


								4 3/4"		3/4"-10		2 7/8"	3 3/4"	3/4"	8,800	11,200	4,000 psi Concrete	175	FM Approved, UL Listed	97799A556	00000	4	97799A424	00000
								5 1/2"	3/4"-10	3 5/8"		3 3/4"	3/4"	8,800	11,200	4,000 psi Concrete	175	FM Approved, UL Listed	97799A501	00000	4	97799A317	00000
								6 1/4"	3/4"-10	4 3/8"	3 3/4"	3/4"	8,800	11,200	4,000 psi Concrete	175	FM Approved, UL Listed	97799A560	00000	4	97799A425	000000
								7"	3/4"-10	5 1/2"	3 3/4"	3/4"	8,800	11,200	4,000 psi Concrete	175	FM Approved, UL Listed	97799A502	00000	4	97799A318	000000
								8 1/2"	3/4"-10	6 5/8"	3 3/4"	3/4"	8,800	11,200	4,000 psi Concrete	175	FM Approved, UL Listed	97799A503	00000	4	97799A319	000000
								10"	3/4"-10	2 1/4"	3 3/4"	3/4"	8,800	11,200	4,000 psi Concrete	200	FM Approved, UL Listed	97799A510	00000	4	97799A421	000000
								12"	3/4"-10	2 1/4"	3 3/4"	3/4"	8,800	11,200	4,000 psi Concrete	200	FM Approved, UL Listed	97799A515	00000	4	97799A422	000000




										7/8" Diameter

6"	7/8"-9									2 1/8"	4"	7/8"	9,600	15,600	4,000 psi Concrete	225	FM Approved, UL Listed	97799A610	00000	4	97799A426	000000


8"	7/8"-9									2 1/8"	4"	7/8"	9,600	15,600	4,000 psi Concrete	225	FM Approved, UL Listed	97799A615	00000	4	97799A427	000000
10"	7/8"-9									2 1/8"	4"	7/8"	9,600	15,600	4,000 psi Concrete	225	FM Approved, UL Listed	97799A620	000000	4	97799A428	000000




										1" Diameter

										6"	1"-8	2 1/4"	4 1/2"	1"	13,600	20,800	4,000 psi Concrete	250	FM Approved, UL Listed	97799A720	000000	4	97799A429	000000


		9"								1"-8	2 1/4"	4 1/2"	1"	13,600	20,800	4,000 psi Concrete	250	FM Approved, UL Listed	97799A730	000000	4	97799A431	000000
		12"	1"-8							2 1/4"	4 1/2"	1"	13,600	20,800	4,000 psi Concrete	250	FM Approved, UL Listed	97799A740	000000	4	97799A432	000000

Drilling Anchors for Drywall

Skip having to drill a hole. These anchors save you time and effort by drilling their own holes. Their threads offer a stronger hold than our standard plug anchors to mount light fixtures, bulletin boards, and window blinds. They’re also easier to remove but leave a large hole behind.

To install, screw the anchor into your drywall until it's flush with the surface. Then, thread a tapping screw through your component into the anchor and tighten. You can remove your component by unfastening the screw. However, frequently removing the screw will weaken the strength. To remove the anchor, easily back it out with a screwdriver.

Anchors

				Ultimate Strength, lbf
For Screw Size	For Wall Thk.	Lg.	Material	Pull-Out	Shear	Conditions Tested In	Pkg. Qty.		Pkg.
No. 6	3/8" to 5/8"	1 3/8"	Nylon	40	50	3/8" Drywall	100	66615A7	000000
No. 6, No. 7, No. 8, No. 9, No. 10	3/8" to 5/8"	1 5/8"	Nylon	50	Not Rated	3/8" Drywall	50	66615A25	00000
No. 6, No. 7	3/8" to 3/4"	1 1/4"	Zinc	30	Not Rated	3/8" Drywall	50	66615A3	0000
No. 8	3/8" to 3/4"	1 5/8"	Zinc	40	Not Rated	3/8" Drywall	50	66615A1	00000
No. 8	3/8" to 3/4"	1 5/8"	Nylon	40	Not Rated	3/8" Drywall	50	66615A67	0000

Anchors with Screw

Screw						Ultimate Strength, lbf
Size	Lg.	Fastener Head Type	For Wall Thk.	Lg.	Material	Pull-Out	Shear	Conditions Tested In	Pkg. Qty.		Pkg.
No. 6	1"	Rounded	3/8" to 5/8"	1"	Zinc	40	40	3/8" Drywall	25	66615A19	00000
No. 6	1"	Rounded	3/8" to 5/8"	1 3/8"	Nylon	40	40	3/8" Drywall	50	66615A5	00000
No. 8	1"	Rounded	3/8" to 1"	1 5/16"	Zinc	40	60	3/8" Drywall	25	66615A21	00000
No. 8	1"	Rounded	3/8" to 1"	1 11/16"	Nylon	40	60	3/8" Drywall	25	66615A6	00000
No. 8	1 1/4"	Rounded	3/8" to 3/4"	1 5/8"	Zinc	20	Not Rated	3/8" Drywall	25	66615A2	00000
No. 8	1 1/4"	Rounded	3/8" to 3/4"	1 5/8"	Nylon	20	Not Rated	3/8" Drywall	25	66615A4	00000
No. 8	1 1/2"	Rounded	3/8" to 5/8"	1 3/4"	Nylon	40	100	3/8" Drywall	50	66615A28	00000

Anchors for Concrete


Flush Profile	Flanged Profile

Installation Tools

These anchors are your go-to for suspending conduit, lighting, and pipe overhead in concrete. All have an internal plug that expands in four directions to create a tight grip before inserting a threaded rod or bolt. Since the grip is focused at the base, these anchors are best suited for concrete, which can handle the gripping pressure better than softer block and brick. They’re also known as drop-in anchors.

To install, place the anchor into the hole, insert the required installation tool (sold separately), and drive with a hammer until the shoulder of the tool contacts the anchor. All create a permanent female-threaded connection that lets you remove and reinstall a screw or threaded rod.

Zinc-Plated Steel—The most common choice for areas with occasional exposure to moisture.

Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these anchors resist rust. However, they’ll corrode or pit when exposed to salt water and chemicals.

Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these anchors won't degrade when exposed to harsh weather, salt water, and most chemicals.

Flanged Profile—When your hole is longer than the anchor, the flange prevents the anchor from slipping too far down the hole.

	Anchors													Installation Tools
	Thread						Ultimate Strength, lbf
	Size	Dp.	Type	Lg.	Drill Bit Size	Min. Installation Dp.	Pull-Out	Shear	Conditions Tested In	Certification	Pkg. Qty.		Pkg.		Each
Zinc-Plated Steel







				Flush Profile

				1/4"-20	7/16"	UNC	1"	3/8"	1"	1,980	2,120	4,000 psi Concrete	—	25	97083A490	000000	97077A160	00000


				3/8"-16	5/8"	UNC	1 9/16"	1/2"	1 9/16"	4,180	4,580	4,000 psi Concrete	FM Approved, UL Listed	10	97083A510	0000	97077A170	0000
				1/2"-6	13/16"	Coil	2"	5/8"	2"	5,760	6,400	4,000 psi Concrete	FM Approved, UL Listed	1	97083A240	0000	97077A180	0000
				1/2"-13	13/16"	UNC	2"	5/8"	2"	5,760	6,400	4,000 psi Concrete	FM Approved, UL Listed	10	97083A520	00000	97077A180	0000
				5/8"-11	1 3/16"	UNC	2 1/2"	7/8"	2 1/2"	7,440	12,380	4,000 psi Concrete	FM Approved, UL Listed	4	97083A530	00000	97077A190	00000
				3/4"-4 1/2	1 3/8"	Coil	3 3/16"	1"	3 3/16"	9,400	15,680	4,000 psi Concrete	FM Approved, UL Listed	1	97083A250	0000	97077A210	00000
				3/4"-10	1 3/8"	UNC	3 3/16"	1"	3 3/16"	9,400	15,680	4,000 psi Concrete	FM Approved, UL Listed	1	97083A540	0000	97077A210	00000




						Flanged Profile

						1/4"-20	3/8"	UNC	5/8"	3/8"	5/8"	1,140	1,660	4,000 psi Concrete	FM Approved, UL Listed	10	97083A260	0000	93207A110	00000


						1/4"-20	7/16"	UNC	1"	3/8"	1"	1,980	2,120	4,000 psi Concrete	FM Approved, UL Listed	10	97083A210	0000	97077A160	0000
						3/8"-16	13/32"	UNC	3/4"	1/2"	3/4"	2,120	4,220	4,000 psi Concrete	FM Approved, UL Listed	10	97083A270	0000	93207A120	00000
						3/8"-16	5/8"	UNC	1 9/16"	1/2"	1 9/16"	4,180	4,580	4,000 psi Concrete	FM Approved, UL Listed	10	97083A220	0000	97077A170	0000
						1/2"-13	5/8"	UNC	1"	5/8"	1"	3,360	4,880	4,000 psi Concrete	FM Approved, UL Listed	1	97083A280	0000	93207A130	00000
						1/2"-13	13/16"	UNC	2"	5/8"	2"	5,760	6,400	4,000 psi Concrete	FM Approved, UL Listed	5	97083A230	0000	97077A180	0000


						Corrosion-Resistant 18-8 Stainless Steel







										Flush Profile

										1/4"-20	7/16"	UNC	1"	3/8"	1"	1,980	2,120	4,000 psi Concrete	—	4	97082A160	0000	97077A160	0000


										3/8"-16	5/8"	UNC	1 9/16"	1/2"	1 9/16"	4,180	4,580	4,000 psi Concrete	—	1	97082A041	0000	97077A170	0000
										1/2"-13	13/16"	UNC	2"	5/8"	2"	5,760	6,400	4,000 psi Concrete	—	1	97082A043	0000	97077A180	0000
										5/8"-11	1 3/16"	UNC	2 1/2"	7/8"	2 1/2"	7,440	12,380	4,000 psi Concrete	—	1	97082A045	00000	97077A190	00000
										3/4"-10	1 3/8"	UNC	3 3/16"	1"	3 3/16"	9,400	15,680	4,000 psi Concrete	—	1	97082A046	00000	97077A210	00000


										Highly Corrosion-Resistant 316 Stainless Steel







														Flush Profile

														1/4"-20	7/16"	UNC	1"	3/8"	1"	1,980	2,120	4,000 psi Concrete	—	1	97095A160	0000	97077A160	0000


3/8"-16	5/8"													UNC	1 9/16"	1/2"	1 9/16"	4,180	4,580	4,000 psi Concrete	—	1	97095A170	0000	97077A170	0000
1/2"-13	13/16"													UNC	2"	5/8"	2"	5,760	6,400	4,000 psi Concrete	—	1	97095A180	0000	97077A180	0000
5/8"-11	1 3/16"													UNC	2 1/2"	7/8"	2 1/2"	7,440	12,380	4,000 psi Concrete	—	1	97095A190	00000	97077A190	00000
3/4"-10	1 3/8"	UNC												3 3/16"	1"	3 3/16"	9,400	15,680	4,000 psi Concrete	—	1	97095A210	00000	97077A210	00000

Anchors for Drywall

The traditional, economical choice for mounting lightweight switches, security cameras, and clocks into drywall. All of these anchors expand against your hole’s walls to reinforce your mounting hole and resist pullout.

To install, drill a hole slightly deeper than the anchor is long. Next, insert the anchor until it's flush with the surface. Then, thread a tapping screw through your component into the anchor and tighten. Remove your component by unfastening the screw, but the anchor itself cannot be removed.

Anchors

Conical—Ridges on the body prevent spinning during installation, making it easy to tighten down the screw.

Finned—For a secure hold, two large fins grip holes to prevent twisting better than ridges on the conical anchors. The fins also add tension before tightening the screw, so these anchors won't fall out of overhead holes.

					Ultimate Strength
	For Screw Size	Lg.	Drill Bit Size	Material	Pull-Out	Shear	Pkg. Qty.		Pkg.
Conical



		No. 4, No. 5, No. 6, No. 7, No. 8	3/4"	3/16"	Polyethylene	Not Rated	Not Rated	100	97068A110	00000


		No. 6, No. 7, No. 8, No. 9, No. 10	7/8"	3/16"	Polyethylene	Not Rated	Not Rated	100	97068A120	0000
		No. 10, No. 12	1"	1/4"	Polyethylene	Not Rated	Not Rated	100	97068A130	0000
		No. 14, No. 16	1 3/8"	5/16"	Polyethylene	Not Rated	Not Rated	100	97068A140	0000


		Finned



				No. 8	1 3/8"	1/4"	Nylon	Not Rated	Not Rated	50	93370A400	00000


				No. 10, No. 12, No. 14	2"	5/16"	Nylon	Not Rated	Not Rated	50	93370A500	00000
				No. 14	2 3/8"	3/8"	Nylon	Not Rated	Not Rated	25	93370A600	00000

Anchors with Screw

Conical—Ridges on the body prevent spinning during installation, making it easy to tighten down the screw.

	Screw							Ultimate Strength
	Size	Lg.	Lg.	Drill Bit Size	Fastener Head Type	Drive Style	Material	Pull-Out	Shear	Pkg. Qty.		Pkg.
Conical



		No. 6	1"	3/4"	3/16"	Rounded	Phillips/Slotted	Polyethylene	Not Rated	Not Rated	100	98547A121	000000


		No. 6	1"	3/4"	3/16"	Rounded	Phillips	Polyethylene	Not Rated	Not Rated	100	98547A110	00000
		No. 6	1"	7/8"	3/16"	Rounded	Phillips	Polyethylene	Not Rated	Not Rated	100	98547A112	00000
		No. 10	1"	1"	1/4"	Rounded	Phillips	Polyethylene	Not Rated	Not Rated	100	98547A114	00000
		No. 10	1"	1"	1/4"	Rounded	Slotted	Polyethylene	Not Rated	Not Rated	100	98547A119	00000
		No. 10	1"	1"	1/4"	Hex	Slotted	Polyethylene	Not Rated	Not Rated	100	98547A118	00000
		No. 14	1.25"	1 3/8"	5/16"	Rounded	Phillips	Polyethylene	Not Rated	Not Rated	50	98547A116	00000

Vibration-Resistant Wedge Anchors for Concrete

Secure heavy machinery with constant motion, such as vibrating feeders and conveyors, in concrete floors. The wedges on the base of these anchors have ridges that lock them in place, so they won’t shake loose. Since the grip is focused at the base, these anchors are best suited for concrete, which can handle the gripping pressure better than softer block and brick. However, they require holes that match the anchors' diameter exactly to achieve their pull-out strength, making them more difficult to install than sleeve anchors.

To install, drive the anchor through your machinery into a drilled hole until the washer meets the surface. Use the notches along each side of the anchor to locate the wedges, directing the gripping forces away from seams and corners to prevent cracking the concrete. Then, tighten the nut to expand the base wedges. Remove your machinery by unfastening the nut, but the anchor itself cannot be removed.

Zinc-Plated Steel—The most common choice for areas with occasional exposure to moisture.

		Thread				Ultimate Strength, lbf
	Lg.	Size	Lg.	Min. Installation Dp.	Drill Bit Size	Pull-Out	Shear	Conditions Tested In	Installation Torque, ft·lbf	Pkg. Qty.		Pkg.
Zinc-Plated Steel







				1/4" Diameter

				1 3/4"	1/4"-20	1/2"	1 1/8"	1/4"	1,480	2,000	4,000 psi Concrete	8	6	94475A125	000000


				2 3/4"	1/4"-20	1/2"	1 1/8"	1/4"	1,480	2,000	4,000 psi Concrete	8	6	94475A143	00000
				3"	1/4"-20	1/2"	1 1/8"	1/4"	1,480	2,000	4,000 psi Concrete	8	6	94475A166	00000




						5/16" Diameter

						2"	5/16"-18	5/8"	1 1/4"	5/16"	2,400	2,080	4,000 psi Concrete	15	6	94475A185	00000


						3"	5/16"-18	5/8"	1 1/4"	5/16"	2,400	2,080	4,000 psi Concrete	15	4	94475A197	00000




								3/8" Diameter

								2"	3/8"-16	3/4"	1 1/2"	3/8"	3,280	4,400	4,000 psi Concrete	25	4	94475A214	00000


								2 3/4"	3/8"-16	3/4"	1 1/2"	3/8"	3,280	4,400	4,000 psi Concrete	25	4	94475A223	00000
								3 1/2"	3/8"-16	3/4"	1 1/2"	3/8"	3,280	4,400	4,000 psi Concrete	25	4	94475A246	00000
								5"	3/8"-16	3/4"	1 1/2"	3/8"	3,280	4,400	4,000 psi Concrete	25	2	94475A248	0000
								Vibration-Resistant Wedge Anchor for Concrete, 3/8" Diameter, 5" Long Product Detail QuantityPack of 2In stock Select a compatible file type: Parasolid Compatible Products for This Anchor
								6"	3/8"-16	3/4"	1 1/2"	3/8"	3,280	4,400	4,000 psi Concrete	25	2	94475A250	00000




										1/2" Diameter

										2 3/4"	1/2"-13	1"	2 1/4"	1/2"	4,400	8,800	4,000 psi Concrete	55	4	94475A255	00000


										3 1/2"	1/2"-13	1"	2 1/4"	1/2"	4,400	8,800	4,000 psi Concrete	55	2	94475A263	00000
										5"	1/2"-13	1"	2 1/4"	1/2"	4,400	8,800	4,000 psi Concrete	55	1	94475A279	0000
										6"	1/2"-13	1"	2 1/4"	1/2"	4,400	8,800	4,000 psi Concrete	55	1	94475A281	0000
										7"	1/2"-13	1"	2 1/4"	1/2"	4,400	8,800	4,000 psi Concrete	55	1	94475A283	0000




												5/8" Diameter

												3 1/2"	5/8"-11	1 1/4"	3"	5/8"	10,000	12,800	4,000 psi Concrete	95	1	94475A285	0000


												4 1/2"	5/8"-11	1 1/4"	3 1/2"	5/8"	10,000	12,800	4,000 psi Concrete	95	1	94475A286	0000
												5"	5/8"-11	1 1/4"	3 1/2"	5/8"	10,000	12,800	4,000 psi Concrete	95	1	94475A287	0000
												6"	5/8"-11	1 1/4"	3 1/2"	5/8"	10,000	12,800	4,000 psi Concrete	95	1	94475A289	0000
												7"	5/8"-11	1 1/4"	3 1/2"	5/8"	10,000	12,800	4,000 psi Concrete	95	1	94475A295	0000




												3/4" Diameter

		4"	3/4"-10									1 1/2"	3"	3/4"	15,200	18,000	4,000 psi Concrete	170	1	94475A310	00000


		5"	3/4"-10									1 1/2"	3"	3/4"	15,200	18,000	4,000 psi Concrete	170	1	94475A312	00000
		6"	3/4"-10									1 1/2"	3"	3/4"	15,200	18,000	4,000 psi Concrete	170	1	94475A314	00000
		7"	3/4"-10									1 1/2"	3"	3/4"	15,200	18,000	4,000 psi Concrete	170	1	94475A317	00000
		8 1/2"	3/4"-10									1 1/2"	3"	3/4"	15,200	18,000	4,000 psi Concrete	170	1	94475A319	00000
		10"	3/4"-10									1 1/2"	3"	3/4"	15,200	18,000	4,000 psi Concrete	170	1	94475A321	00000




				1" Diameter

				10"	1"-8							2"	5 1/2"	1"	21,200	Not Rated	4,000 psi Concrete	300	1	94475A335	00000

High-Strength Toggle Anchors for Drywall

Our highest-strength drywall anchors are strong enough to secure pegboards, grab bars, and sinks. The toggle creates an extremely tight hold and won’t fall behind the wall when your screw is removed, so you can switch out components without losing strength. However, the anchor itself cannot be removed. Unlike traditional toggle bolt anchors, the toggle is pulled tight to the wall with the cap, which also covers the hole.

To install, push the toggle through a drilled hole and pull the anchor back toward you until the toggle rests flush against the wall. Then, slide the cap along the straps up to the wall. Push straps side-to-side, snapping them off so they're level with the cap. Next, position your component over the hole, insert a machine screw, and tighten. The minimum screw length is the wall and component thicknesses plus _1/2".

								Ultimate Strength, lbf
For Thread Size	Usable Lg.	Drill Bit Size	Wing Span	Toggle Material	Material	Fastener Head Type	Drive Style	Pull-Out	Shear	Conditions Tested In	Pkg. Qty.		Pkg.
10-24	3/8" to 3 5/8"	1/2"	2"	Zinc-Plated Steel	Polystyrene	—	—	230	240	1/2" Drywall	10	97802A314	000000
10-24	3/8" to 3 5/8"	1/2"	2"	Zinc-Plated Steel	Polystyrene	Rounded	Phillips/Slotted	230	240	1/2" Drywall	10	97802A321	00000
10-24	3/8" to 3 5/8"	1/2"	2"	Zinc-Plated Steel	Polystyrene	Flat	Phillips	230	240	1/2" Drywall	10	97802A322	00000
10-24	3/8" to 3 5/8"	1/2"	2"	18-8 Stainless Steel	Polystyrene	—	—	230	240	1/2" Drywall	1	98184A411	0000
10-24	2" to 9 1/2"	1/2"	2"	Zinc-Plated Steel	Polystyrene	—	—	230	240	1/2" Drywall	5	97802A330	00000
10-24	2" to 9 1/2"	1/2"	2"	18-8 Stainless Steel	Polystyrene	—	—	230	240	1/2" Drywall	1	97802A339	0000
1/4"-20	3/8" to 3 5/8"	1/2"	2"	Zinc-Plated Steel	Polystyrene	—	—	260	240	1/2" Drywall	10	97802A316	00000
1/4"-20	3/8" to 3 5/8"	1/2"	2"	Zinc-Plated Steel	Polystyrene	Rounded	Phillips/Slotted	260	240	1/2" Drywall	5	97802A323	0000
1/4"-20	3/8" to 3 5/8"	1/2"	2"	Zinc-Plated Steel	Polystyrene	Flat	Phillips	260	240	1/2" Drywall	10	97802A324	00000
1/4"-20	3/8" to 3 5/8"	1/2"	2"	18-8 Stainless Steel	Polystyrene	—	—	260	240	1/2" Drywall	1	98184A413	0000
1/4"-20	2" to 9 1/2"	1/2"	2"	Zinc-Plated Steel	Polystyrene	—	—	260	240	1/2" Drywall	5	97802A319	00000
1/4"-20	2" to 9 1/2"	1/2"	2"	18-8 Stainless Steel	Polystyrene	—	—	260	240	1/2" Drywall	1	97802A340	0000
5/16"-18	3/8" to 2 1/2"	3/4"	2"	Zinc-Plated Steel	Polystyrene	—	—	270	Not Rated	1/2" Drywall	10	97802A325	00000
3/8"-16	3/8" to 2 1/2"	3/4"	2"	Zinc-Plated Steel	Polystyrene	—	—	270	290	1/2" Drywall	5	97802A317	00000
3/8"-16	3/8" to 2 1/2"	3/4"	2"	18-8 Stainless Steel	Polystyrene	—	—	270	290	1/2" Drywall	1	98184A415	0000
1/2"-13	3/8" to 2 1/2"	3/4"	2"	18-8 Stainless Steel	Polystyrene	—	—	270	Not Rated	1/2" Drywall	1	98184A417	0000
M5 × 0.8 mm	10 mm to 92 mm	13 mm	51 mm	Zinc-Plated Steel	Polystyrene	—	—	230	240	1/2" Drywall	5	97802A326	0000
M6 × 1 mm	10 mm to 92 mm	13 mm	51 mm	Zinc-Plated Steel	Polystyrene	—	—	260	240	1/2" Drywall	5	97802A327	0000
M8 × 1.25 mm	10 mm to 64 mm	19 mm	51 mm	Zinc-Plated Steel	Polystyrene	—	—	260	290	1/2" Drywall	5	97802A328	00000
M10 × 1.5 mm	10 mm to 64 mm	19 mm	51 mm	Zinc-Plated Steel	Polystyrene	—	—	270	Not Rated	1/2" Drywall	5	97802A329	00000

Light Duty Anchors for Block and Brick

These anchors grip the sides of your hole to resist twisting and pullout in block and brick. They’re an economical choice for mounting lightweight switches, security cameras, and clocks. All are the easiest anchors to install in block and brick but have the lowest strength.

Anchors

Alligator—Expand and fuse to hole walls for a secure hold. Projections on these anchors add gripping force to prevent twisting. Removing and reinstalling your screw will not lessen the strength.

Flanged Alligator—Best for installing in walls with hollow cavities, the flange keeps these anchors from being pushed through your hole. The anchors split in half inside the cavity for a secure hold. Projections on the anchors add gripping force to prevent twisting. Removing and reinstalling your screw will not lessen the strength.

Lobed—As the anchors expand, lobes running down the entire length of the anchor firmly grip your hole to create the highest pull-out strengths of all our light duty anchors. However, removing and reinstalling the screw will weaken the strength.

Finned—For a secure hold, two large fins grip holes in solid surfaces or expand in the cavity of hollow surfaces. The fins also add tension before tightening the screw, so these anchors won't fall out of overhead holes. Removing and reinstalling the screw will weaken the strength.

Ribbed—Soft enough to conform to irregular, out-of-round holes, yet hard enough to hold securely. These anchors expand and distort to fit your hole while ribs add gripping force to prevent twisting. Removing and reinstalling your screw will not lessen the strength.

					Ultimate Strength
	For Screw Size	Lg.	Drill Bit Size	Material	Pull-Out, lbf	Shear	Conditions Tested In	Pkg. Qty.		Pkg.
Alligator



		No. 4, No. 5, No. 6, No. 7, No. 8, No. 9	15/16"	3/16"	Polypropylene	480	Not Rated	3,500 psi Concrete	50	97065A200	00000


		No. 6, No. 7, No. 8, No. 9, No. 10, No. 11, No. 12	1 1/8"	1/4"	Polypropylene	640	Not Rated	3,500 psi Concrete	50	97065A210	00000
		No. 8, No. 9, No. 10, No. 11, No. 12, No. 14	1 9/16"	5/16"	Polypropylene	1,000	Not Rated	3,500 psi Concrete	25	97065A220	0000


		Flanged Alligator



				No. 4, No. 5, No. 6, No. 7, No. 8, No. 9	1"	3/16"	Polypropylene	480	Not Rated	3,500 psi Concrete	50	97065A100	0000


				No. 6, No. 7, No. 8, No. 9, No. 10, No. 11, No. 12	1 3/16"	1/4"	Polypropylene	640	Not Rated	3,500 psi Concrete	50	97065A110	00000
				No. 8, No. 9, No. 10, No. 11, No. 12, No. 14	1 5/8"	5/16"	Polypropylene	1,000	Not Rated	3,500 psi Concrete	25	97065A120	0000


				Lobed



						No. 6	1"	3/16"	PVC	720	Not Rated	2,000 psi Concrete	100	95482A131	0000


						No. 6	1 1/2"	3/16"	PVC	800	Not Rated	2,000 psi Concrete	100	95482A111	0000
						No. 8	1"	15/64"	PVC	880	Not Rated	2,000 psi Concrete	100	95482A125	0000
						No. 8	1 1/2"	15/64"	PVC	960	Not Rated	2,000 psi Concrete	100	95482A112	0000
						No. 10	1"	1/4"	PVC	1,000	Not Rated	2,000 psi Concrete	100	95482A132	0000
						No. 10	1 1/2"	1/4"	PVC	1,480	Not Rated	2,000 psi Concrete	100	95482A142	00000
						No. 10	2"	1/4"	PVC	2,080	Not Rated	2,000 psi Concrete	100	95482A143	00000
						No. 14, 1/4"	1"	5/16"	PVC	1,200	Not Rated	2,000 psi Concrete	100	95482A144	00000
						No. 14, 1/4"	1 1/2"	5/16"	PVC	1,680	Not Rated	2,000 psi Concrete	100	95482A145	00000
						No. 14, 1/4"	2"	5/16"	PVC	2,280	Not Rated	2,000 psi Concrete	100	95482A133	00000
						No. 16, 5/16"	1 1/2"	3/8"	PVC	1,480	Not Rated	2,000 psi Concrete	100	95482A134	00000


						No. 16, 5/16"	2 1/2"	3/8"	PVC	2,480	Not Rated	2,000 psi Concrete	100	95482A135	00000
						No. 20, 3/8"	1 1/2"	7/16"	PVC	4,200	Not Rated	2,000 psi Concrete	50	95482A113	00000
						No. 20, 3/8"	2"	7/16"	PVC	4,800	Not Rated	2,000 psi Concrete	50	95482A138	00000
						No. 20, 3/8"	3"	7/16"	PVC	6,400	Not Rated	2,000 psi Concrete	50	95482A139	00000


						Finned



								No. 4, No. 5, No. 6	1"	3/16"	Nylon	240	Not Rated	Solid Brick	100	97225A113	0000


								No. 8, No. 9, No. 10	1 3/16"	7/32"	Nylon	400	Not Rated	Solid Brick	100	97225A115	00000
								No. 10, No. 11, No. 12	1 1/2"	5/16"	Nylon	680	Not Rated	Solid Brick	100	97225A140	00000
								1/4", 5/16"	2"	3/8"	Nylon	840	Not Rated	Solid Brick	50	97225A150	00000


								Ribbed



										No. 6, No. 7, No. 8	3/4"	1/4"	Lead	80	Not Rated	3,000 psi Concrete	25	97026A016	0000


No. 6, No. 7, No. 8	1"									1/4"	Lead	80	Not Rated	3,000 psi Concrete	25	97026A011	00000
No. 6, No. 7, No. 8	1 1/2"									1/4"	Lead	100	Not Rated	3,000 psi Concrete	25	97026A012	00000
No. 10, No. 12, No. 14	1"									5/16"	Lead	160	Not Rated	3,000 psi Concrete	25	97026A013	00000
No. 10, No. 12, No. 14	1 1/2"									5/16"	Lead	540	Not Rated	3,000 psi Concrete	10	97026A014	00000
No. 16, No. 17, No. 18	1 1/2"									3/8"	Lead	1,000	Not Rated	4,000 psi Concrete	10	97026A045	00000

Anchors with Screw

	Screw							Ultimate Strength
	Size	Lg.	Lg.	Drill Bit Size	Fastener Head Type	Drive Style	Material	Pull-Out, lbf	Shear	Conditions Tested In	Pkg. Qty.		Pkg.
Flanged Alligator



		No. 10	1 1/2"	1 1/8"	1/4"	Rounded	Phillips/Slotted	Polypropylene	640	Not Rated	3,500 psi Concrete	50	97065A400	000000


		Lobed



				No. 6	1"	1"	3/16"	Rounded	Phillips/Slotted	PVC	720	Not Rated	2,000 psi Concrete	100	98612A010	00000


				No. 8	1"	1"	15/64"	Rounded	Phillips/Slotted	PVC	1,080	Not Rated	2,000 psi Concrete	100	98612A015	00000
				No. 10	1"	1"	1/4"	Rounded	Phillips/Slotted	PVC	1,000	Not Rated	2,000 psi Concrete	100	98612A020	00000
				No. 14	1 1/2"	1 1/2"	5/16"	Rounded	Phillips/Slotted	PVC	1,680	Not Rated	2,000 psi Concrete	50	98612A025	00000

Sleeve Anchors for Block and Brick

Mount machinery, railings, and framing in walls and floors. These anchors have a sleeve that expands inside your hole to create a strong grip. Since the gripping force is distributed along the entire length of the anchor, it won’t crack soft materials like block and brick. You can use these anchors as an alternative to wedge anchors in concrete near edges, corners, or other weak points, but they are not as strong.

To install, drive the anchor through your machinery into a drilled hole until the head meets the surface. Then, tighten the nut or flat head to expand the anchor sleeve. Remove your machinery by unfastening the nut or flat head, but the anchor itself cannot be removed.

Anchors with Hex Nut

Image of Product. Front orientation. Contains Annotated. Anchors. Sleeve Anchors for Block and Brick, Hex Nut.

Zinc-Plated Steel—The most common choice for areas with occasional exposure to moisture.

Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these anchors resist rust. However, they’ll corrode or pit when exposed to salt water and chemicals.

		Thread				Ultimate Strength, lbf
	Lg.	Size	Lg.	Min. Installation Dp.	Drill Bit Size	Pull-Out	Shear	Conditions Tested In	Installation Torque, ft·lbf	Pkg. Qty.		Pkg.
Zinc-Plated Steel







				1/4" Diameter

				1 1/8"	10-24	1/2"	1/2"	1/4"	640	1,000	4,000 psi Concrete	2	25	97046A129	000000


				1 5/8"	10-24	1 1/4"	1/2"	1/4"	640	1,000	4,000 psi Concrete	2	10	97046A131	0000
				2 5/8"	10-24	2"	1/2"	1/4"	640	1,000	4,000 psi Concrete	2	10	97046A132	0000




						5/16" Diameter

						1 7/8"	1/4"-20	1 1/4"	1"	5/16"	1,400	2,360	4,000 psi Concrete	12	25	97046A111	0000


						2 3/4"	1/4"-20	2"	1"	5/16"	1,400	2,360	4,000 psi Concrete	12	25	97046A112	00000




								3/8" Diameter

								2 1/4"	5/16"-18	1 1/2"	1 1/4"	3/8"	2,160	4,120	4,000 psi Concrete	18	10	97046A113	00000


								3 3/8"	5/16"-18	2 5/8"	1 1/4"	3/8"	2,160	4,120	4,000 psi Concrete	18	10	97046A114	0000
								4 3/8"	5/16"-18	3 5/8"	1 1/4"	3/8"	2,160	4,120	4,000 psi Concrete	18	10	97046A115	0000




										1/2" Diameter

										2 7/8"	3/8"-16	2"	1 1/2"	1/2"	2,580	4,860	4,000 psi Concrete	26	10	97046A116	00000


										3 3/8"	3/8"-16	2 1/2"	1 1/2"	1/2"	2,580	4,860	4,000 psi Concrete	26	10	97046A117	00000
										4 3/8"	3/8"-16	3 1/2"	1 1/2"	1/2"	2,580	4,860	4,000 psi Concrete	26	5	97046A118	0000
										5 3/4"	3/8"-16	4"	1 1/2"	1/2"	2,580	4,860	4,000 psi Concrete	26	5	97046A119	00000
										6 3/4"	3/8"-16	4 7/8"	1 1/2"	1/2"	2,580	4,860	4,000 psi Concrete	26	5	97046A121	0000




												5/8" Diameter

												3 1/4"	1/2"-13	2"	2"	5/8"	5,620	4,860	4,000 psi Concrete	50	10	97046A122	00000


												3 3/4"	1/2"-13	2 5/8"	2"	5/8"	5,620	4,860	4,000 psi Concrete	50	10	97046A123	00000
												5"	1/2"-13	4"	2"	5/8"	5,620	4,860	4,000 psi Concrete	50	5	97046A124	00000
												6 1/4"	1/2"-13	4"	2"	5/8"	5,620	4,860	4,000 psi Concrete	50	5	97046A125	00000




3/4" Diameter

3 5/8"	5/8"-11													2 1/2"	2 1/4"	3/4"	5,820	11,040	4,000 psi Concrete	90	5	97046A126	00000


5 1/8"	5/8"-11													4"	2 1/4"	3/4"	5,820	11,040	4,000 psi Concrete	90	1	97046A127	0000
7 1/8"	5/8"-11	6"												2 1/4"	3/4"	5,820	11,040	4,000 psi Concrete	90	1	97046A128	0000


Corrosion-Resistant 18-8 Stainless Steel







														5/16" Diameter

				1 7/8"	1/4"-20									1"	1 1/8"	5/16"	1,880	1,680	4,000 psi Concrete	22	5	96892A231	00000


				2 3/4"	1/4"-20									2"	1 1/8"	5/16"	1,880	1,680	4,000 psi Concrete	22	1	96892A244	0000




														3/8" Diameter

						2 1/8"	5/16"-18							1 1/4"	1 1/4"	3/8"	3,000	2,080	4,000 psi Concrete	26	1	96892A258	0000


						3 1/4"	5/16"-18							2 1/4"	1 1/4"	3/8"	3,000	2,080	4,000 psi Concrete	26	1	96892A274	0000




														1/2" Diameter

								2 5/8"						3/8"-16	1 5/8"	1 1/2"	1/2"	4,800	6,000	4,000 psi Concrete	38	1	96892A287	0000


								4 1/2"	3/8"-16					3"	1 1/2"	1/2"	4,800	6,000	4,000 psi Concrete	38	1	96892A300	00000




														5/8" Diameter

														5"	1/2"-13	4 1/4"	2"	5/8"	6,000	8,400	4,000 psi Concrete	75	1	96892A314	00000




														3/4" Diameter

														3 3/8"	5/8"-11	2 1/4"	2"	3/4"	8,800	12,400	4,000 psi Concrete	110	1	96892A329	00000


														5"	5/8"-11	3 1/4"	2"	3/4"	8,800	12,400	4,000 psi Concrete	110	1	96892A343	00000

Anchors with Flat Head

The flat head creates a flush finish in countersunk holes.

Zinc-Plated Steel—The most common choice for areas with occasional exposure to moisture.

		Thread				Ultimate Strength, lbf
	Lg.	Size	Lg.	Min. Installation Dp.	Drill Bit Size	Pull-Out	Shear	Conditions Tested In	Installation Torque, ft·lbf	Pkg. Qty.		Pkg.
Zinc-Plated Steel







				1/4" Diameter

				1 1/2"	10-24	5/8"	5/8"	1/4"	640	1,000	4,000 psi Concrete	6	25	97480A141	000000


				2 1/4"	10-24	1 1/4"	5/8"	1/4"	640	1,000	4,000 psi Concrete	6	25	97480A142	00000
				3"	10-24	2"	5/8"	1/4"	640	1,000	4,000 psi Concrete	6	25	97480A143	00000
				4"	10-24	2 1/2"	5/8"	1/4"	640	1,000	4,000 psi Concrete	6	25	97480A144	00000
				5 1/4"	10-24	2 1/2"	5/8"	1/4"	640	1,000	4,000 psi Concrete	6	10	97480A145	00000




						5/16" Diameter

						2 1/2"	1/4"-20	1 1/4"	1 1/4"	5/16"	1,480	2,280	4,000 psi Concrete	12	10	97480A146	00000




								3/8" Diameter

								2 3/4"	5/16"-18	1 5/8"	1 5/8"	3/8"	2,280	4,000	4,000 psi Concrete	18	10	97480A148	00000


								4"	5/16"-18	2 5/8"	1 5/8"	3/8"	2,280	4,000	4,000 psi Concrete	18	10	97480A149	00000
								5"	5/16"-18	1 5/8"	1 5/8"	3/8"	2,280	4,000	4,000 psi Concrete	18	10	97480A151	00000
								6"	5/16"-18	1 5/8"	1 5/8"	3/8"	2,280	4,000	4,000 psi Concrete	18	10	97480A152	00000

High-Strength Anchors for Concrete

Offering the highest pull-out strengths, adhesive grips the anchors' lobes and knurls to keep anchors from shaking loose. These anchors are often used to secure heavy machinery with jarring starts and stops, such as compressors and compactors.

To install, fill a clean, drilled hole half full of epoxy adhesive (sold separately). Thread a screw or threaded rod into the anchor and then slightly twist the anchor into the hole until it's flush with the surface. Then, hammer the head of the screw or rod a few times for a snug fit. All create a permanent female-threaded connection that lets you remove and reinstall a screw or threaded rod.

Zinc-Plated Steel—The most common choice for areas with occasional exposure to moisture.

Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these anchors won't degrade when exposed to harsh weather, salt water, and most chemicals.

	Thread						Ultimate Strength
	Size	Dp.	Type	Lg.	Drill Bit Size	Min. Installation Dp.	Pull-Out, lbf	Shear	Conditions Tested In		Each
Zinc-Plated Steel



		1/4"-20	1/2"	UNC	1 5/8"	5/16"	1 3/4"	2,880	Not Rated	3,000 psi Concrete	93980A110	00000


		5/16"-18	3/4"	UNC	2 3/8"	7/16"	2 3/4"	7,200	Not Rated	3,000 psi Concrete	93980A130	0000
		3/8"-16	1"	UNC	2 3/4"	1/2"	3 1/4"	9,200	Not Rated	3,000 psi Concrete	93980A150	00000
		1/2"-13	1"	UNC	3 3/4"	5/8"	4 1/8"	12,800	Not Rated	3,000 psi Concrete	93980A170	00000
		5/8"-11	1 1/2"	UNC	5 3/4"	7/8"	6 1/4"	26,000	Not Rated	3,000 psi Concrete	93980A190	00000
		3/4"-10	1 1/2"	UNC	6 1/2"	1"	7 1/2"	36,000	Not Rated	3,000 psi Concrete	93980A210	00000
		1"-8	2"	UNC	8 1/2"	1 1/2"	9 1/2"	50,800	Not Rated	3,000 psi Concrete	93980A230	000000


		Highly Corrosion-Resistant 316 Stainless Steel



				1/4"-20	1/2"	UNC	1 5/8"	5/16"	1 3/4"	2,880	Not Rated	3,000 psi Concrete	93980A530	00000


				5/16"-18	3/4"	UNC	2 3/8"	7/16"	2 3/4"	7,200	Not Rated	3,000 psi Concrete	93980A550	00000
				3/8"-16	1"	UNC	2 3/4"	1/2"	3 1/4"	9,200	Not Rated	3,000 psi Concrete	93980A570	00000
				1/2"-13	1"	UNC	3 3/4"	5/8"	4 1/8"	12,800	Not Rated	3,000 psi Concrete	93980A590	00000
				5/8"-11	1 1/2"	UNC	5 3/4"	7/8"	6 1/4"	26,000	Not Rated	3,000 psi Concrete	93980A630	000000
				3/4"-10	1 1/2"	UNC	6 1/2"	1"	7 1/2"	36,000	Not Rated	3,000 psi Concrete	93980A650	000000
				1"-8	2"	UNC	8 1/2"	1 1/2"	9 1/2"	50,800	Not Rated	3,000 psi Concrete	93980A670	000000

Anchoring Adhesives

Container Size, fl. oz.	Begins to Harden, min.	Reaches Full Strength, hr.	Mix Ratio	Temp. Range, ° F		Each
8.5	30	24	1:1	40 to 100	7505A4	000000

Toggle Bolt Anchors for Drywall

These classic toggle anchors are best for securing handrails, cabinets, and shelving in drywall. All have a spring-loaded toggle that firmly grips behind your wall. Since the gripping force is spread over the length of the toggle, they create a stronger hold than plug anchors. However, they require a larger hole to push the toggle through, which may need patching if not covered by your component.

To install, insert the bolt through your component and thread on the toggle. Then, fold the toggle wings flush against the bolt and push them through a drilled hole until they pop open on the other side. Next, pull back on the bolt and tighten it for a secure hold. The bolt is reusable, but the toggle will fall behind the wall when the bolt is removed.

	Anchors																Replacement Toggles
			Thread				Head				Ultimate Strength, lbf
	Lg.	Usable Lg.	Size	Lg.	Drill Bit Size	Fastener Head Type	Dia.	Ht.	Wing Span	Material	Pull-Out	Shear	Conditions Tested In	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
1/8" Diameter



		2"	1 1/8"	6-32	1 7/8"	3/8"	Rounded	0.24"	0.15"	1 1/2"	Zinc-Plated Steel	150	135	1/2" Drywall	50	97121A011	000000	—	———	0


		3"	2 1/8"	6-32	2 7/8"	3/8"	Rounded	0.24"	0.15"	1 1/2"	Zinc-Plated Steel	150	135	1/2" Drywall	50	97121A013	00000	—	———	0
		3"	2 1/8"	6-32	2 31/32"	3/8"	Rounded	0.321"	0.086"	1 1/2"	Zinc-Plated Steel	150	135	1/2" Drywall	50	97121A071	00000	—	———	0
		4"	3 1/8"	6-32	3 7/8"	3/8"	Rounded	0.24"	0.15"	1 1/2"	Zinc-Plated Steel	150	135	1/2" Drywall	50	97121A015	00000	—	———	0
		4"	3 1/8"	6-32	3 31/32"	3/8"	Rounded	0.321"	0.086"	1 1/2"	Zinc-Plated Steel	150	135	1/2" Drywall	50	97121A073	00000	—	———	0


		3/16" Diameter



				2"	7/8"	10-24	1 7/8"	1/2"	Rounded	0.33"	0.13"	2 1/8"	Zinc-Plated Steel	185	190	1/2" Drywall	50	97121A017	00000	50	97132A027	000000


				3"	1 7/8"	10-24	2 7/8"	1/2"	Rounded	0.33"	0.13"	2 1/8"	Zinc-Plated Steel	185	190	1/2" Drywall	50	97121A019	00000	50	97132A027	00000
				4"	2 3/4"	10-24	3 3/4"	1/2"	Flat	0.385"	0.116"	2 1/8"	Zinc-Plated Steel	185	190	1/2" Drywall	50	97121A083	00000	50	97132A027	00000
				4"	2 7/8"	10-24	3 7/8"	1/2"	Rounded	0.33"	0.13"	2 1/8"	Zinc-Plated Steel	185	190	1/2" Drywall	50	97121A021	00000	50	97132A027	00000
				6"	5"	10-24	6"	1/2"	Rounded	0.365"	0.13"	2"	Zinc-Plated Steel	185	190	1/2" Drywall	50	97121A041	00000	50	97132A027	00000


				1/4" Diameter



						3"	1 5/8"	1/4"-20	2 3/4"	5/8"	Flat	0.507"	0.153"	2 1/8"	Zinc-Plated Steel	235	235	1/2" Drywall	25	97121A085	00000	25	97132A029	0000


						3"	1 7/8"	1/4"-20	2 7/8"	5/8"	Rounded	0.46"	0.205"	2 1/8"	Zinc-Plated Steel	235	235	1/2" Drywall	25	97121A043	00000	25	97132A029	0000
						4"	2 7/8"	1/4"-20	3 7/8"	5/8"	Rounded	0.46"	0.205"	2 1/8"	Zinc-Plated Steel	235	235	1/2" Drywall	25	97121A045	00000	25	97132A029	0000


						5/16" Diameter



								3"	1 1/2"	5/16"-18	2 7/8"	7/8"	Rounded	0.57"	0.24"	2 5/8"	Zinc-Plated Steel	250	280	1/2" Drywall	10	97121A051	0000	10	97132A035	0000


								4"	2 1/2"	5/16"-18	3 7/8"	7/8"	Rounded	0.59"	0.25"	2"	Zinc-Plated Steel	250	Not Rated	1/2" Drywall	10	97121A053	00000	10	97132A035	0000


								3/8" Diameter



										3"	1 3/8"	3/8"-16	2 7/8"	7/8"	Rounded	0.691"	0.25"	3"	Zinc-Plated Steel	255	295	1/2" Drywall	10	97121A059	00000	25	97132A031	00000


										4"	2 5/8"	3/8"-16	3 7/8"	7/8"	Rounded	0.691"	0.25"	3"	Zinc-Plated Steel	255	295	1/2" Drywall	10	97121A061	00000	25	97132A031	00000
										5"	3 3/8"	3/8"-16	4 7/8"	7/8"	Rounded	0.691"	0.25"	3"	Zinc-Plated Steel	255	295	1/2" Drywall	10	97121A063	00000	25	97132A031	00000
										6"	4 3/8"	3/8"-16	5 7/8"	7/8"	Rounded	0.691"	0.25"	3"	Zinc-Plated Steel	255	295	1/2" Drywall	5	97121A065	0000	25	97132A031	00000


										1/2" Diameter



												4"	1 1/2"	1/2"-13	3 7/8"	1 1/4"	Rounded	0.785"	0.36"	4 3/4"	Zinc-Plated Steel	325	315	1/2" Drywall	5	97121A067	00000	10	97132A033	00000


6"	3 1/2"											1/2"-13	4 7/8"	1 1/4"	Rounded	0.785"	0.36"	4 3/4"	Zinc-Plated Steel	325	315	1/2" Drywall	5	97121A069	00000	10	97132A033	00000

Hook Anchors for Concrete

Fasten everything from signposts to support beams. Install these anchors in wet concrete during construction, with their threads sticking out of the surface. Designed for permanent installations, you'd have to cut these anchors out to remove them.

L-Hook

Steel—Best for dry environments since moisture will cause these anchors to rust.

Corrosion-Resistant Hot-Dipped Galvanized Steel—Combines the strength of steel with the rust resistance of stainless steel. These anchors are an economical alternative to 18-8 stainless steel in wet and outdoor environments, but they’ll corrode or pit when exposed to salt water and chemicals. They must be used with other hot-dipped galvanized fasteners.

Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these anchors resist rust. However, they’ll corrode or pit when exposed to salt water and chemicals.

						Ultimate Strength
	Lg.	Thread Size	Min. Thread Lg.	Hook Lg.	Tensile Strength, psi	Pull-Out	Shear	Specs. Met		Each
Steel







				3/8" Diameter

				8"	3/8"-16	2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91587A110	00000


				10"	3/8"-16	2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91587A120	0000
				12"	3/8"-16	2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91587A130	0000
				14"	3/8"-16	2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91587A140	0000
				24"	3/8"-16	2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91587A710	0000




						1/2" Diameter

						8"	1/2"-13	2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91587A210	0000


						10"	1/2"-13	2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91587A220	0000
						12"	1/2"-13	2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91587A230	0000
						14"	1/2"-13	2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91587A720	0000
						16"	1/2"-13	2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91587A245	0000
						18"	1/2"-13	2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91587A250	0000
						24"	1/2"-13	2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91587A730	0000




								5/8" Diameter

								8"	5/8"-11	2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91587A310	0000


								10"	5/8"-11	2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91587A320	0000
								12"	5/8"-11	2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91587A330	0000
								18"	5/8"-11	2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91587A350	0000
								24"	5/8"-11	2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91587A740	00000




										3/4" Diameter

										8"	3/4"-10	3"	2 3/4"	58,000	Not Rated	Not Rated	ASTM A36	91587A410	0000


										10"	3/4"-10	3"	2 3/4"	58,000	Not Rated	Not Rated	ASTM A36	91587A420	0000
										12"	3/4"-10	3"	2 3/4"	58,000	Not Rated	Not Rated	ASTM A36	91587A430	0000
										14"	3/4"-10	3"	2 3/4"	58,000	Not Rated	Not Rated	ASTM A36	91587A440	0000
										18"	3/4"-10	3"	2 3/4"	58,000	Not Rated	Not Rated	ASTM A36	91587A450	00000
										24"	3/4"-10	3"	2 3/4"	58,000	Not Rated	Not Rated	ASTM A36	91587A460	00000




												1" Diameter

10"												1"-8	4"	3 3/4"	58,000	Not Rated	Not Rated	ASTM A36	91587A620	00000


12"	1"-8											4"	3 3/4"	58,000	Not Rated	Not Rated	ASTM A36	91587A630	00000
14"	1"-8											4"	3 3/4"	58,000	Not Rated	Not Rated	ASTM A36	91587A640	00000
18"	1"-8	4"										3 3/4"	58,000	Not Rated	Not Rated	ASTM A36	91587A650	00000
24"	1"-8	4"	3 3/4"									58,000	Not Rated	Not Rated	ASTM A36	91587A660	00000


Corrosion-Resistant Hot-Dipped Galvanized Steel







												3/8" Diameter

				8"								3/8"-16	2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91603A100	0000


				10"	3/8"-16							2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91603A110	0000
				12"	3/8"-16							2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91603A120	0000
				14"	3/8"-16							2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91603A130	0000
				24"	3/8"-16							2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91603A510	0000




												1/2" Diameter

												8"	1/2"-13	2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91603A150	0000


						10"	1/2"-13					2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91603A155	0000
						12"	1/2"-13					2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91603A160	0000
						14"	1/2"-13					2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91603A520	0000
						16"	1/2"-13					2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91603A165	0000
						18"	1/2"-13					2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91603A170	0000




												5/8" Diameter

												8"	5/8"-11	2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91603A250	0000


								10"	5/8"-11			2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91603A255	0000
								12"	5/8"-11			2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91603A260	0000
								14"	5/8"-11			2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91603A540	00000
								16"	5/8"-11			2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91603A550	00000
								18"	5/8"-11			2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91603A265	00000
								24"	5/8"-11			2 1/2"	2"	58,000	Not Rated	Not Rated	ASTM A36	91603A560	00000




												3/4" Diameter

										8"	3/4"-10	3"	2 3/4"	58,000	Not Rated	Not Rated	ASTM A36	91603A300	0000


										10"	3/4"-10	3"	2 3/4"	58,000	Not Rated	Not Rated	ASTM A36	91603A305	0000
										12"	3/4"-10	3"	2 3/4"	58,000	Not Rated	Not Rated	ASTM A36	91603A310	00000
										14"	3/4"-10	3"	2 3/4"	58,000	Not Rated	Not Rated	ASTM A36	91603A315	00000
										16"	3/4"-10	3"	2 3/4"	58,000	Not Rated	Not Rated	ASTM A36	91603A530	00000
										18"	3/4"-10	3"	2 3/4"	58,000	Not Rated	Not Rated	ASTM A36	91603A320	00000
										24"	3/4"-10	3"	2 3/4"	58,000	Not Rated	Not Rated	ASTM A36	91603A325	00000




1" Diameter

12"	1"-8											4"	3 3/4"	58,000	Not Rated	Not Rated	ASTM A36	91603A410	00000


16"	1"-8											4"	3 3/4"	58,000	Not Rated	Not Rated	ASTM A36	91603A570	00000
18"	1"-8	4"										3 3/4"	58,000	Not Rated	Not Rated	ASTM A36	91603A430	00000
24"	1"-8	4"	3 3/4"									58,000	Not Rated	Not Rated	ASTM A36	91603A440	00000


Corrosion-Resistant 18-8 Stainless Steel







												3/8" Diameter

				8"								3/8"-16	2 1/2"	2"	80,000	Not Rated	Not Rated	—	91615A110	00000


				10"	3/8"-16							2 1/2"	2"	80,000	Not Rated	Not Rated	—	91615A120	00000
				12"	3/8"-16							2 1/2"	2"	80,000	Not Rated	Not Rated	—	91615A130	00000
				14"	3/8"-16							2 1/2"	2"	80,000	Not Rated	Not Rated	—	91615A140	00000




												1/2" Diameter

												8"	1/2"-13	2 1/2"	2"	80,000	Not Rated	Not Rated	—	91615A210	00000


						10"	1/2"-13					2 1/2"	2"	80,000	Not Rated	Not Rated	—	91615A220	00000
						12"	1/2"-13					2 1/2"	2"	80,000	Not Rated	Not Rated	—	91615A230	00000
						16"	1/2"-13					2 1/2"	2"	80,000	Not Rated	Not Rated	—	91615A240	00000
						18"	1/2"-13					2 1/2"	2"	80,000	Not Rated	Not Rated	—	91615A250	00000




												5/8" Diameter

												8"	5/8"-11	2 1/2"	2"	80,000	Not Rated	Not Rated	—	91615A310	00000


												10"	5/8"-11	2 1/2"	2"	80,000	Not Rated	Not Rated	—	91615A320	00000
								12"				5/8"-11	2 1/2"	2"	80,000	Not Rated	Not Rated	—	91615A330	00000
								18"	5/8"-11			2 1/2"	2"	80,000	Not Rated	Not Rated	—	91615A350	00000




												3/4" Diameter

												8"	3/4"-10	3"	2 3/4"	80,000	Not Rated	Not Rated	—	91615A410	00000


												10"	3/4"-10	3"	2 3/4"	80,000	Not Rated	Not Rated	—	91615A420	00000
												12"	3/4"-10	3"	2 3/4"	80,000	Not Rated	Not Rated	—	91615A430	00000
												14"	3/4"-10	3"	2 3/4"	80,000	Not Rated	Not Rated	—	91615A440	00000
										18"	3/4"-10	3"	2 3/4"	80,000	Not Rated	Not Rated	—	91615A450	00000
										24"	3/4"-10	3"	2 3/4"	80,000	Not Rated	Not Rated	—	91615A460	00000




												1" Diameter

												12"	1"-8	4"	3 3/4"	80,000	Not Rated	Not Rated	—	91615A530	00000


												18"	1"-8	4"	3 3/4"	80,000	Not Rated	Not Rated	—	91615A550	00000
24"												1"-8	4"	3 3/4"	80,000	Not Rated	Not Rated	—	91615A560	00000

J-Hook

Steel—Best for dry environments since moisture will cause these anchors to rust.

Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these anchors resist rust. However, they’ll corrode or pit when exposed to salt water and chemicals.

				Hook			Ultimate Strength
	Lg.	Thread Size	Min. Thread Lg.	Lg.	Opening	Tensile Strength, psi	Pull-Out	Shear	Specs. Met		Each
Steel







				3/8" Diameter

				8"	3/8"-16	2.5"	1"	1/2"	58,000	Not Rated	Not Rated	ASTM A36	91588A111	00000


				10"	3/8"-16	2.5"	1"	1/2"	58,000	Not Rated	Not Rated	ASTM A36	91588A121	0000
				12"	3/8"-16	2.5"	1"	1/2"	58,000	Not Rated	Not Rated	ASTM A36	91588A130	0000
				14"	3/8"-16	2.5"	1"	1/2"	58,000	Not Rated	Not Rated	ASTM A36	91588A140	0000




						1/2" Diameter

						8"	1/2"-13	2.5"	1 1/4"	5/8"	58,000	Not Rated	Not Rated	ASTM A36	91588A210	0000


						10"	1/2"-13	2.5"	1 1/4"	5/8"	58,000	Not Rated	Not Rated	ASTM A36	91588A220	0000
						12"	1/2"-13	2.5"	1 1/4"	5/8"	58,000	Not Rated	Not Rated	ASTM A36	91588A230	0000
						16"	1/2"-13	2.5"	1 1/4"	5/8"	58,000	Not Rated	Not Rated	ASTM A36	91588A245	0000
						18"	1/2"-13	2.5"	1 1/4"	5/8"	58,000	Not Rated	Not Rated	ASTM A36	91588A250	0000




								5/8" Diameter

								8"	5/8"-11	2.5"	1 1/4"	3/4"	58,000	Not Rated	Not Rated	ASTM A36	91588A310	0000


								10"	5/8"-11	2.5"	1 1/4"	3/4"	58,000	Not Rated	Not Rated	ASTM A36	91588A320	0000
								12"	5/8"-11	2.5"	1 1/4"	3/4"	58,000	Not Rated	Not Rated	ASTM A36	91588A330	0000
								18"	5/8"-11	2.5"	1 1/4"	3/4"	58,000	Not Rated	Not Rated	ASTM A36	91588A350	00000




										3/4" Diameter

										8"	3/4"-10	3"	1 1/2"	1 1/8"	58,000	Not Rated	Not Rated	ASTM A36	91588A411	0000


										10"	3/4"-10	3"	1 1/2"	1 1/8"	58,000	Not Rated	Not Rated	ASTM A36	91588A420	0000
										12"	3/4"-10	3"	1 1/2"	1 1/8"	58,000	Not Rated	Not Rated	ASTM A36	91588A430	0000
										14"	3/4"-10	3"	1 1/2"	1 1/8"	58,000	Not Rated	Not Rated	ASTM A36	91588A440	00000
										18"	3/4"-10	3"	1 1/2"	1 1/8"	58,000	Not Rated	Not Rated	ASTM A36	91588A450	00000
										24"	3/4"-10	3"	1 1/2"	1 1/8"	58,000	Not Rated	Not Rated	ASTM A36	91588A460	00000




												1" Diameter

												10"	1"-8	4"	3 1/4"	2 1/8"	58,000	Not Rated	Not Rated	ASTM A36	91588A620	00000


												12"	1"-8	4"	3 1/4"	2 1/8"	58,000	Not Rated	Not Rated	ASTM A36	91588A630	00000
18"												1"-8	4"	3 1/4"	2 1/8"	58,000	Not Rated	Not Rated	ASTM A36	91588A650	00000
24"	1"-8											4"	3 1/4"	2 1/8"	58,000	Not Rated	Not Rated	ASTM A36	91588A660	00000


Corrosion-Resistant Hot-Dipped Galvanized Steel







												3/8" Diameter

												8"	3/8"-16	2.5"	1"	1/2"	58,000	Not Rated	Not Rated	ASTM A36	91604A111	0000


												10"	3/8"-16	2.5"	1"	1/2"	58,000	Not Rated	Not Rated	ASTM A36	91604A121	0000
				12"								3/8"-16	2.5"	1"	1/2"	58,000	Not Rated	Not Rated	ASTM A36	91604A130	0000
				14"	3/8"-16							2.5"	1"	1/2"	58,000	Not Rated	Not Rated	ASTM A36	91604A140	0000




												1/2" Diameter

												8"	1/2"-13	2.5"	1 1/4"	5/8"	58,000	Not Rated	Not Rated	ASTM A36	91604A210	0000


												10"	1/2"-13	2.5"	1 1/4"	5/8"	58,000	Not Rated	Not Rated	ASTM A36	91604A220	0000
												12"	1/2"-13	2.5"	1 1/4"	5/8"	58,000	Not Rated	Not Rated	ASTM A36	91604A230	0000
						16"						1/2"-13	2.5"	1 1/4"	5/8"	58,000	Not Rated	Not Rated	ASTM A36	91604A245	0000
						18"	1/2"-13					2.5"	1 1/4"	5/8"	58,000	Not Rated	Not Rated	ASTM A36	91604A250	00000




												5/8" Diameter

												8"	5/8"-11	2.5"	1 1/4"	3/4"	58,000	Not Rated	Not Rated	ASTM A36	91604A310	00000


												10"	5/8"-11	2.5"	1 1/4"	3/4"	58,000	Not Rated	Not Rated	ASTM A36	91604A320	00000
								12"				5/8"-11	2.5"	1 1/4"	3/4"	58,000	Not Rated	Not Rated	ASTM A36	91604A330	00000
								18"	5/8"-11			2.5"	1 1/4"	3/4"	58,000	Not Rated	Not Rated	ASTM A36	91604A340	00000




												3/4" Diameter

												8"	3/4"-10	3"	1 1/2"	1 1/8"	58,000	Not Rated	Not Rated	ASTM A36	91604A411	0000


												10"	3/4"-10	3"	1 1/2"	1 1/8"	58,000	Not Rated	Not Rated	ASTM A36	91604A420	00000
												12"	3/4"-10	3"	1 1/2"	1 1/8"	58,000	Not Rated	Not Rated	ASTM A36	91604A430	00000
												14"	3/4"-10	3"	1 1/2"	1 1/8"	58,000	Not Rated	Not Rated	ASTM A36	91604A435	00000
										18"		3/4"-10	3"	1 1/2"	1 1/8"	58,000	Not Rated	Not Rated	ASTM A36	91604A450	00000
										24"	3/4"-10	3"	1 1/2"	1 1/8"	58,000	Not Rated	Not Rated	ASTM A36	91604A495	00000




												1" Diameter

												10"	1"-8	4"	3 1/4"	2 1/8"	58,000	Not Rated	Not Rated	ASTM A36	91604A511	00000


												12"	1"-8	4"	3 1/4"	2 1/8"	58,000	Not Rated	Not Rated	ASTM A36	91604A513	00000
18"												1"-8	4"	3 1/4"	2 1/8"	58,000	Not Rated	Not Rated	ASTM A36	91604A519	00000
24"	1"-8											4"	3 1/4"	2 1/8"	58,000	Not Rated	Not Rated	ASTM A36	91604A522	00000


Corrosion-Resistant 18-8 Stainless Steel







												3/8" Diameter

												8"	3/8"-16	2 1/2"	1"	1/2"	80,000	Not Rated	Not Rated	—	91521A110	00000


												10"	3/8"-16	2 1/2"	1"	1/2"	80,000	Not Rated	Not Rated	—	91521A115	00000
				12"								3/8"-16	2 1/2"	1"	1/2"	80,000	Not Rated	Not Rated	—	91521A120	00000
				14"	3/8"-16							2 1/2"	1"	1/2"	80,000	Not Rated	Not Rated	—	91521A125	00000




												1/2" Diameter

												8"	1/2"-13	2 1/2"	1 1/4"	5/8"	80,000	Not Rated	Not Rated	—	91521A150	00000


												10"	1/2"-13	2 1/2"	1 1/4"	5/8"	80,000	Not Rated	Not Rated	—	91521A155	00000
												12"	1/2"-13	2 1/2"	1 1/4"	5/8"	80,000	Not Rated	Not Rated	—	91521A160	00000
						16"						1/2"-13	2 1/2"	1 1/4"	5/8"	80,000	Not Rated	Not Rated	—	91521A165	00000
						18"	1/2"-13					2 1/2"	1 1/4"	5/8"	80,000	Not Rated	Not Rated	—	91521A170	00000




												5/8" Diameter

												8"	5/8"-11	2 1/2"	1 1/4"	3/4"	80,000	Not Rated	Not Rated	—	91521A205	00000


												10"	5/8"-11	2 1/2"	1 1/4"	3/4"	80,000	Not Rated	Not Rated	—	91521A210	00000
								12"				5/8"-11	2 1/2"	1 1/4"	3/4"	80,000	Not Rated	Not Rated	—	91521A215	00000




												3/4" Diameter

												8"	3/4"-10	3"	1 1/2"	1 1/8"	80,000	Not Rated	Not Rated	—	91521A260	00000


												10"	3/4"-10	3"	1 1/2"	1 1/8"	80,000	Not Rated	Not Rated	—	91521A305	00000
												12"	3/4"-10	3"	1 1/2"	1 1/8"	80,000	Not Rated	Not Rated	—	91521A310	00000
												14"	3/4"-10	3"	1 1/2"	1 1/8"	80,000	Not Rated	Not Rated	—	91521A315	00000
												18"	3/4"-10	3"	1 1/2"	1 1/8"	80,000	Not Rated	Not Rated	—	91521A320	00000
										24"		3/4"-10	3"	1 1/2"	1 1/8"	80,000	Not Rated	Not Rated	—	91521A325	00000




												1" Diameter

												18"	1"-8	4"	3 1/4"	2 1/8"	80,000	Not Rated	Not Rated	—	91521A420	00000

Drilling Toggle Anchors for Drywall

A cross between a toggle bolt and drilling anchor, these anchors create a secure hold without having to drill a hole first. They’re twice as strong as drilling anchors but only about one-third as strong as toggle bolt anchors. All have a bolt that you can repeatedly remove without affecting the anchor, so they’re good for installing signs and other components you’d like to swap out. However, the anchor itself cannot be removed.

To install, screw the anchor into your drywall until it's flush with the surface. Then, insert the bolt through your component and tighten to flip the toggle open and draw it firmly in place behind your wall.

Screw						Head			Ultimate Strength, lbf
Size	Lg.	Fastener Head Type	For Wall Thk.	Lg.	Material	Dia.	Ht.	Wing Span	Pull-Out	Shear	Conditions Tested In	Toggle Material	Pkg. Qty.		Pkg.



	No. 6	2"	Rounded	3/8" to 5/8"	1 3/8"	Nylon	0.68"	0.05"	1 3/4"	100	180	1/2" Drywall	Zinc Alloy	6	66625A1	00000


	No. 6	3"	Rounded	3/8" to 5/8"	1 3/8"	Nylon	0.68"	0.05"	1 3/4"	100	180	1/2" Drywall	Zinc Alloy	6	66625A11	0000
	No. 8	2 1/8"	Flanged, Rounded	3/8" to 5/8"	2 1/2"	Zinc	0.57"	0.1"	1 1/2"	85	Not Rated	1/2" Drywall	Zinc Alloy	10	66625A111	00000
	No. 8	2 1/8"	Rounded	3/8" to 5/8"	2 1/2"	Zinc	0.57"	0.025"	1 1/2"	85	Not Rated	1/2" Drywall	Zinc Alloy	10	66625A65	00000
	No. 10	2"	Rounded	3/8" to 5/8"	1 5/8"	Nylon	3/4"	0.05"	2"	120	200	1/2" Drywall	Zinc Alloy	6	66625A12	0000
	1/4"	3"	Rounded	3/8" to 5/8"	1 7/8"	Nylon	0.81"	0.05"	2 5/16"	140	220	1/2" Drywall	Zinc Alloy	4	66625A13	00000

High-Strength Anchors for Block and Brick

Offering up to twice the strength of double expansion anchors, these US-made anchors expand in four directions for a superior grip in floors, walls, and ceilings. You can even use them to mount heavy machinery with constant motion, such as conveyors and vibrating feeders, because their ridges lock them in place to resist vibration. All of these anchors expand along their full length to distribute the gripping force, so they won’t crack soft materials. You can use them in concrete near edges, corners, or other weak points as an alternative to drop-in anchors.

To install, tap the anchor into a drilled hole. Insert a screw or threaded rod through your machinery and into the anchor. Then, tighten to expand the anchor. All create a permanent female-threaded connection that lets you remove and reinstall a screw or threaded rod.

					Ultimate Strength, lbf
Thread Size	Lg.	Drill Bit Size	Min. Installation Dp.	Material	Pull-Out	Shear	Conditions Tested In	Pkg. Qty.		Pkg.
1/4"-20	1 1/4"	1/2"	1 1/4"	Zinc	2,320	2,080	3,000 psi Concrete	10	92915A110	000000
5/16"-18	1 1/2"	9/16"	1 1/2"	Zinc	2,600	3,280	3,000 psi Concrete	10	92915A120	00000
3/8"-16	1 3/4"	11/16"	1 3/4"	Zinc	3,600	3,840	3,000 psi Concrete	10	92915A130	00000
1/2"-13	2 1/4"	7/8"	2 1/4"	Zinc	4,800	8,000	3,000 psi Concrete	4	92915A140	00000
5/8"-11	2 5/8"	1 1/8"	2 5/8"	Zinc	5,600	14,000	3,000 psi Concrete	1	92915A150	0000
3/4"-10	3 1/8"	1 1/4"	3 1/8"	Zinc	9,600	15,200	3,000 psi Concrete	1	92915A160	00000

Weld Anchors for Concrete

Also known as Nelson studs, these anchors strengthen the connection between steel framing and concrete. Weld them to the framing to enhance adhesion and resist shear forces. Their heads ensure secure embedding when wet concrete is poured. A ferrule is included if you choose to weld with a stud welder. Designed for permanent installations, you'd have to cut these anchors out to remove them.

Steel—Best for dry environments since moisture will cause these anchors to rust.

		Head			Ultimate Strength
	Lg.	Dia.	Ht.	Tensile Strength, psi	Pull-Out	Shear	Ferrule Material	Specs. Met	Pkg. Qty.		Pkg.
Steel







				1/4" Diameter

				4 1/8"	1/2"	0.187"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	10	90578A621	00000




						3/8" Diameter

						2 1/8"	3/4"	0.281"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	10	90578A631	0000


						3 1/8"	3/4"	0.281"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	10	90578A632	0000
						4 1/8"	3/4"	0.281"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	10	90578A633	00000
						6 1/8"	3/4"	0.281"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	10	90578A634	00000




								1/2" Diameter

								2 1/8"	1"	0.312"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	10	90578A641	00000


								3 1/8"	1"	0.312"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	10	90578A642	00000
								4 1/8"	1"	0.312"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	10	90578A643	00000
								5 5/16"	1"	0.312"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	90578A644	0000
								6 1/8"	1"	0.312"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	90578A645	0000
								8 1/8"	1"	0.312"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	90578A646	00000




										5/8" Diameter

										4 3/16"	1 1/4"	0.312"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	90578A651	00000


										5 3/16"	1 1/4"	0.312"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	90578A652	00000
										6 3/16"	1 1/4"	0.312"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	90578A653	00000
										6 9/16"	1 1/4"	0.312"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	90578A654	00000
										8 3/16"	1 1/4"	0.312"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	1	90578A655	0000




												3/4" Diameter

												3 3/16"	1 1/4"	0.375"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	90578A661	00000


												3 3/8"	1 1/4"	0.375"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	90578A662	00000
												4 3/16"	1 1/4"	0.375"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	90578A663	00000
												4 3/8"	1 1/4"	0.375"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	90578A664	00000
												4 7/8"	1 1/4"	0.375"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	90578A665	00000
												5 3/16"	1 1/4"	0.375"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	90578A666	00000
												5 3/8"	1 1/4"	0.375"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	90578A667	00000
5 7/8"												1 1/4"	0.375"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	90578A668	00000
6 3/16"	1 1/4"											0.375"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	90578A669	00000
8 3/16"	1 1/4"											0.375"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	1	90578A671	0000
9 3/16"	1 1/4"											0.375"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	1	90578A672	0000




		7/8" Diameter

		4 3/16"	1 3/8"									0.375"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	90578A681	00000


		5 3/16"	1 3/8"	0.375"								65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	1	90578A682	0000
		6 3/16"	1 3/8"	0.375"	65,000							Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	1	90578A683	0000
		7 3/16"	1 3/8"	0.375"	65,000							Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	1	90578A684	0000
		8 3/16"	1 3/8"	0.375"	65,000							Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	1	90578A685	0000
		9 3/16"	1 3/8"	0.375"	65,000							Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	1	90578A686	0000




				1" Diameter

				4 1/4"	1 5/8"							0.5"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	1	90578A691	0000


				6 1/4"	1 5/8"	0.5"	65,000					Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	1	90578A692	0000
				8 1/4"	1 5/8"	0.5"	65,000					Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	1	90578A693	0000

Stud-Style Drilling Anchors for Drywall

Create a threaded-stud connection without having to drill a hole. These anchors save you time and effort by drilling their own holes. Commonly used to install standoffs to mount signs or panels, their threads offer a stronger hold than our standard plug anchors. They’re also easier to remove but leave a large hole behind.

To install, use a hex-drive L-key to screw the anchor into your drywall until it's flush with the surface. Then, position your component and thread on a nut to secure. You can remove your component by unfastening the nut. However, frequently removing the screw will weaken the strength. To remove the anchor, easily back it out with a hex-drive L-key.

Thread					Ultimate Strength
Size	Lg.	Lg.	Flange Dia.	Material	Pull-Out	Shear		Each
5/16"-18	5/16"	1 15/16"	1/2"	Aluminum	Not Rated	Not Rated	94706A991	00000

Hammer-In Anchors for Drywall

Tap in like a nail—no need to drill a hole or clean up after installation like other anchors. These anchors have a leg that flips open to grab behind your wall like a talon, making them as strong as toggle bolt anchors. Unlike drilling and toggle bolt anchors, these leave a small slit behind for easier wall repairs.

To install, tap the anchor into your drywall until it’s flush with the surface. Then, thread a tapping screw through your component into the anchor and tighten. You can remove your component by unfastening the screw. However, removing the screw will weaken the strength. To remove the anchor, unfasten the screw to release the leg’s grip. Then, partially reinsert the screw to use it as a handle and gently wiggle the anchor out.

Anchors with Screw

Screw							Ultimate Strength
Size	Lg.	Lg.	For Wall Thk.	Fastener Head Type	Drive Style	Material	Pull-Out, lbf	Shear	Conditions Tested In	Pkg. Qty.		Pkg.



	No. 8	1 1/4"	2"	1/2" to 5/8"	Rounded	Phillips	Nylon	165	Not Rated	1/2" Drywall	10	66615A92	00000

Stud-Style Toggle Anchors for Hollow Block and Brick

Create secure threaded-stud connections in hollow walls and ceilings, such as cinder blocks and hollow core panels. These anchors have the highest shear strength of any of our anchors for hollow block and brick, and are made in the U.S. Their toggle bar pivots inside hollow cavities for a firm hold. All are similar to toggle bolt anchors, but require a smaller hole, so you won’t end up with a gaping hole in your block or brick.

To install, position the washer on the anchor and thread on the nut. Then, push the anchor through your component into a drilled hole and twist the rod 180°—gravity drops the toggle into position. Tighten the nut to secure. You can remove your component by unfastening the nut. Twist the rod back 180° to collapse the toggle and remove the anchor.

			Thread					Ultimate Strength, lbf
	Lg.	Usable Lg.	Size	Lg.	Wing Span	Drill Bit Size	Material	Pull-Out	Shear	Conditions Tested In	Pkg. Qty.		Pkg.
1/4" Diameter



		1 3/4"	1"	1/4"-20	5/8"	1"	5/16"	Zinc-Yellow-Chromate-Plated Steel	680	1,480	1,500 psi Concrete	4	94040A110	000000


		2 1/2"	1 3/4"	1/4"-20	1"	1"	5/16"	Zinc-Yellow-Chromate-Plated Steel	680	1,480	1,500 psi Concrete	4	94040A120	00000
		3 1/4"	2 1/2"	1/4"-20	1 7/8"	1"	5/16"	Zinc-Yellow-Chromate-Plated Steel	680	1,480	1,500 psi Concrete	4	94040A130	00000


		5/16" Diameter



				2 1/2"	1 1/2"	5/16"-18	1 1/8"	1 1/4"	5/16"	Zinc-Yellow-Chromate-Plated Steel	880	2,280	1,500 psi Concrete	4	94040A440	00000


				3 1/4"	2 1/4"	5/16"-18	1 3/4"	1 1/4"	5/16"	Zinc-Yellow-Chromate-Plated Steel	880	2,280	1,500 psi Concrete	4	94040A450	00000
				3 3/4"	2 3/4"	5/16"-18	1 5/8"	1 1/4"	5/16"	Zinc-Yellow-Chromate-Plated Steel	880	2,280	1,500 psi Concrete	4	94040A460	00000


				3/8" Diameter



						3 1/4"	2"	3/8"-16	1 7/8"	1 1/2"	3/8"	Zinc-Yellow-Chromate-Plated Steel	1,000	3,000	1,500 psi Concrete	4	94040A170	00000


						3 3/4"	2 1/2"	3/8"-16	1 5/8"	1 1/2"	3/8"	Zinc-Yellow-Chromate-Plated Steel	1,000	3,000	1,500 psi Concrete	4	94040A180	00000
						4"	2 3/4"	3/8"-16	1 7/8"	1 1/2"	3/8"	Zinc-Yellow-Chromate-Plated Steel	1,000	3,000	1,500 psi Concrete	2	94040A310	00000
						4 1/2"	3 1/8"	3/8"-16	3 1/4"	1 1/2"	3/8"	Zinc-Yellow-Chromate-Plated Steel	1,000	3,000	1,500 psi Concrete	4	94040A190	00000
						6"	4 1/2"	3/8"-16	3 1/2"	1 1/2"	3/8"	Zinc-Yellow-Chromate-Plated Steel	1,800	3,000	1,500 psi Concrete	1	94255A500	00000

Reusable Anchors for Drywall

Installation

Tools

Good for installing signs and other objects you’d like to swap out, these anchors have a bolt that you can repeatedly remove without affecting the anchor. The sleeve expands behind the wall, creating a mushroom-shape grip for a secure hold. Teeth on the flange bite the drywall surface, so the anchor won’t twist when you remove and reinstall the screw. While the bolt can be removed, the anchor itself cannot.

To install, tap the anchor into a drilled hole until it's flush with your drywall. Then, thread a machine screw through your object and tighten to expand the anchor. For repetitive installations, use the optional installation tool. It inserts the screw and expands the anchor with a single squeeze of the handle, speeding up the setup time.

Anchors											Installation Tools
					Ultimate Strength, lbf
Thread Size	Lg.	Usable Lg.	Drill Bit Size	Material	Pull-Out	Shear	Conditions Tested In	Pkg. Qty.		Pkg.		Each
6-32	1 1/2"	3/8" to 1/2"	5/16"	Zinc-Plated Steel	80	120	3/8" Drywall	25	97102A478	000000	90228A110	000000
10-24	1 3/4"	1/2" to 5/8"	3/8"	Zinc-Plated Steel	100	140	3/8" Drywall	10	97102A517	00000	90228A110	00000
10-24	2 1/4"	3/4" to 1 1/8"	3/8"	Zinc-Plated Steel	100	140	3/8" Drywall	10	97102A519	0000	90228A110	00000
1/4"-20	2 1/8"	1/2" to 5/8"	7/16"	Zinc-Plated Steel	100	160	3/8" Drywall	10	97102A551	00000	90228A110	00000
1/4"-20	2 5/8"	3/4" to 1 1/8"	7/16"	Zinc-Plated Steel	100	160	3/8" Drywall	10	97102A553	0000	90228A110	00000

Drive Rivet Anchors for Block and Brick

Fasten signs, security cameras, and motion detectors. All of these anchors have a rivet head that creates a secure connection with a finished look. Easier to install than other types of anchors for block and brick, the anchors expand as you hammer in the pin or screw. Since the gripping force is distributed along the entire length of the anchor, it won’t crack soft materials. These anchors can be used in concrete near edges, corners, or other weak points, but they are not as strong as other drive rivet anchors for concrete.

To install, insert the anchor through your component and into a drilled hole. Then, hammer the pin or screw until it's flush with the anchor's head, which expands the anchor body.

Pin Drive Anchors

To remove, pry out the pin and then pull out the anchor.

		Head						Ultimate Strength, lbf
	Lg.	Dia.	Ht.	Min. Installation Dp.	Drill Bit Size	Pin Material	Material	Pull-Out	Shear	Conditions Tested In	Certification	Pkg. Qty.		Pkg.
3/16" Diameter



		7/8"	7/16"	7/64"	3/4"	3/16"	Steel	Zinc	400	560	4,000 psi Concrete	FM Approved	100	97090A102	00000


		1/4" Diameter



				3/4"	9/16"	9/64"	5/8"	1/4"	Steel	Zinc	580	655	4,000 psi Concrete	FM Approved	50	97090A104	0000


				1"	9/16"	9/64"	5/8"	1/4"	Steel	Zinc	580	655	4,000 psi Concrete	FM Approved	25	97090A106	0000
				1"	9/16"	9/64"	5/8"	1/4"	18-8 Stainless Steel	Zinc	580	655	4,000 psi Concrete	FM Approved	25	97090A130	0000
				1 1/4"	9/16"	9/64"	5/8"	1/4"	Steel	Zinc	580	655	4,000 psi Concrete	FM Approved	25	97090A108	0000
				1 1/4"	9/16"	9/64"	5/8"	1/4"	18-8 Stainless Steel	Zinc	580	655	4,000 psi Concrete	FM Approved	25	97090A135	0000
				1 1/2"	9/16"	9/64"	5/8"	1/4"	Steel	Zinc	580	655	4,000 psi Concrete	FM Approved	25	97090A110	0000
				1 1/2"	9/16"	9/64"	5/8"	1/4"	18-8 Stainless Steel	Zinc	580	655	4,000 psi Concrete	FM Approved	10	97090A140	0000
				2"	9/16"	9/64"	5/8"	1/4"	Steel	Zinc	580	655	4,000 psi Concrete	FM Approved	25	97090A112	0000
				2"	9/16"	9/64"	5/8"	1/4"	18-8 Stainless Steel	Zinc	580	655	4,000 psi Concrete	FM Approved	10	97090A145	0000
				3"	9/16"	9/64"	1 1/4"	1/4"	Steel	Zinc	990	970	4,000 psi Concrete	—	10	97090A118	0000

Easy-Release Screw Drive Anchors

To remove, unthread the screw to release the anchor's grip and then pull out the anchor.

		Head						Ultimate Strength, lbf
	Lg.	Dia.	Ht.	Min. Installation Dp.	Drill Bit Size	Screw Material	Material	Pull-Out	Shear	Conditions Tested In	Certification	Pkg. Qty.		Pkg.
1/4" Diameter



		3/4"	9/16"	5/32"	5/8"	1/4"	Steel	Zinc	850	880	4,000 psi Concrete	FM Approved	50	97090A305	000000


		1"	9/16"	5/32"	5/8"	1/4"	Steel	Zinc	850	880	4,000 psi Concrete	FM Approved	50	97090A310	00000
		1 1/4"	9/16"	5/32"	5/8"	1/4"	Steel	Zinc	850	880	4,000 psi Concrete	FM Approved	25	97090A315	0000
		1 1/2"	9/16"	5/32"	5/8"	1/4"	Steel	Zinc	850	880	4,000 psi Concrete	FM Approved	25	97090A320	00000
		2"	9/16"	5/32"	5/8"	1/4"	Steel	Zinc	850	880	4,000 psi Concrete	FM Approved	25	97090A325	00000

Quick-Twist Anchors for Concrete

Install with the twist of a nut—no adhesive or special installation tool required. All of these anchors have a wedge-shaped base with expansion clips that widen against the hole’s sides, creating a tight grip for overhead use. They’re often used to suspend conduit, lighting, and pipes. Since the grip is focused at the base, these anchors are best suited for concrete, which can handle the gripping pressure better than softer block and brick. However, they are not as strong as our other anchors for concrete that are for overhead use.

To install, thread the anchor onto a threaded rod with a nut and washer. Then, tap into a drilled hole and turn the nut to expand the base. These anchors should be recessed—install to any depth greater than the minimum installation depth. Remove your component by unfastening the nut, but the anchor itself cannot be removed.

Zinc-Plated Steel—The most common choice for areas with occasional exposure to moisture.

	Thread						Ultimate Strength
	Size	Dp.	Type	Lg.	Drill Bit Size	Min. Installation Dp.	Pull-Out, lbf	Shear	Conditions Tested In	Pkg. Qty.		Pkg.
Zinc-Plated Steel



		1/4"-20	21/32"	UNC	2 1/4"	3/8"	2 1/4"	Not Rated	Not Rated	—	4	97045A510	000000


		3/8"-16	7/8"	UNC	2 3/8"	1/2"	3"	3,400	Not Rated	3,000 psi Concrete	4	97045A041	00000
		1/2"-13	1"	UNC	2 1/2"	5/8"	3 1/4"	5,200	Not Rated	3,000 psi Concrete	2	97045A043	00000

Shallow-Install Anchors for Block and Brick


	Installation Tools

Adjustable-Depth Installation Tools	Quick-Set Installation Tools

Secure window frames and doors in walls where your drilling depth is limited. These anchors have similar strengths to double expansion anchors but only need about 75% of the installation depth. All have a sleeve that expands inside your hole to create a strong grip. The sleeve, commonly called a caulking sleeve, also creates a seal to block out air and moisture. Since the gripping force is distributed along the entire length of these anchors, they won’t crack soft materials like block and brick. They’re also known as caulk-in anchors.

To install, place the anchor into a drilled hole, cone end first. Insert an installation tool (sold separately) into the anchor to expand the sleeve over the cone. Then, position your component, insert a screw or threaded rod, and tighten. All create a permanent female-threaded connection that lets you remove and reinstall a screw or threaded rod. They cannot be used in overhead applications.

Adjustable-Depth Installation Tools—Use the adjustable stop to set anchors at consistent depths.

Quick-Set Installation Tools—For high volume tasks, turn with a power drill to speed up repetitive installations.

Anchors												Installation Tools		Adjustable-Depth Installation Tools		Quick-Set Installation Tools
						Ultimate Strength, lbf
Thread Size	Lg.	Drill Bit Size	Min. Installation Dp.	Sleeve Material	Material	Pull-Out	Shear	Conditions Tested In	Pkg. Qty.		Pkg.		Each		Each		Each
8-32	9/16"	5/16"	1/2"	Lead	Zinc	340	340	4,000 psi Concrete	25	97041A611	000000	97020A111	00000	———	0	———	0
10-24	3/4"	3/8"	5/8"	Lead	Zinc	920	880	4,000 psi Concrete	25	97041A612	00000	97020A112	0000	———	0	97041A505	000000
1/4"-20	7/8"	1/2"	7/8"	Lead	Zinc	1,480	1,400	4,000 psi Concrete	25	97041A028	0000	97020A114	0000	97105A040	0000000	97041A520	00000
5/16"-18	1"	5/8"	1"	Lead	Zinc	1,880	2,000	4,000 psi Concrete	10	97041A613	00000	97020A115	0000	———	0	———	0
3/8"-16	1 1/4"	3/4"	1 1/4"	Lead	Zinc	2,400	3,280	4,000 psi Concrete	5	97041A614	0000	97020A121	0000	97105A060	000000	97041A535	00000
1/2"-13	1 9/16"	7/8"	1 1/2"	Lead	Zinc	3,400	4,400	4,000 psi Concrete	5	97041A615	0000	97020A122	00000	———	0	———	0
5/8"-11	1 7/8"	1 1/8"	2"	Lead	Zinc	3,880	6,000	4,000 psi Concrete	1	97041A717	0000	———	0	———	0	———	0
3/4"-10	2"	1 1/4"	2 1/2"	Lead	Zinc	5,600	7,600	4,000 psi Concrete	1	97041A719	0000	97020A124	00000	———	0	———	0

Anchors for Block and Brick

Also known as double expansion anchors, these expand from both sides for full contact with your hole’s walls. They’re often used to mount handrails, shelving, and light fixtures. Since the gripping force is distributed along the entire length of the anchor, it won’t crack soft materials like block and brick. You can use these anchors as an alternative to drop-in anchors in concrete near edges, corners, or other weak points, but they are not as strong.

To install, hammer into a drilled hole and position your component. Then, insert a screw or threaded rod and tighten. For maximum expansion, the anchor should protrude slightly above the surface before threading the screw. All create a permanent female-threaded connection that lets you remove and reinstall a screw or threaded rod. They cannot be used in overhead applications.

					Ultimate Strength, lbf
Thread Size	Lg.	Drill Bit Size	Min. Installation Dp.	Material	Pull-Out	Shear	Conditions Tested In	Pkg. Qty.		Pkg.
1/4"-20	1 3/8"	1/2"	1 1/4"	Zinc	880	1,080	4,000 psi Concrete	10	97031A039	00000
5/16"-18	1 5/8"	5/8"	1 1/2"	Zinc	1,480	2,000	4,000 psi Concrete	10	97031A040	0000
3/8"-16	2"	3/4"	1 3/4"	Zinc	2,000	3,000	4,000 psi Concrete	5	97031A041	00000
1/2"-13	2 1/2"	7/8"	2 1/4"	Zinc	3,480	4,000	4,000 psi Concrete	1	97031A043	0000
5/8"-11	2 3/4"	1"	2 1/2"	Zinc	6,000	10,000	4,000 psi Concrete	4	97031A045	0000
3/4"-10	3 15/16"	1 1/4"	3 1/2"	Zinc	8,000	13,200	4,000 psi Concrete	1	97031A046	0000

Bolt-Style Sleeve Anchors for Block and Brick

Remove the bolt so the anchor is flush with your walls and floors to slide components past these anchors, making it easier to install or make adjustments. They’re best for door frames that need to be pressed into place or machinery you service frequently. All have a sleeve that expands inside your hole to create a strong grip. Since the gripping force is distributed along the entire length of the anchor, it won’t crack soft materials like block and brick. You can use these anchors as an alternative to wedge anchors in concrete near edges, corners, or other weak points, but they are not as strong.

To install, drive the anchor through your component into a drilled hole until the head meets the surface. Then, tighten the bolt to expand the anchor sleeve. As you tighten, the nylon ring compresses to secure the component against the surface. You can remove the bolt, but the anchor itself cannot be removed.

Anchors with Hex Head

Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these anchors resist rust. However, they’ll corrode or pit when exposed to salt water and chemicals.

		Thread				Ultimate Strength, lbf				Each		Package
	Lg.	Size	Lg.	Min. Installation Dp.	Drill Bit Size	Pull-Out	Shear	Conditions Tested In	Installation Torque, ft·lbf		Each	Pkg. Qty.		Pkg.
Corrosion-Resistant 18-8 Stainless Steel







				1/4" Diameter

				1 3/4"	10-24	3/4"	1 1/4"	1/4"	1,480	2,080	4,000 psi Concrete	3	92405A194	00000	4	92405A102	000000


				3"	10-24	3/4"	1 1/4"	1/4"	1,480	2,080	4,000 psi Concrete	3	92405A198	0000	4	92405A104	00000




						3/8" Diameter

						2 1/4"	5/16"-18	7/8"	2"	3/8"	4,400	6,400	4,000 psi Concrete	12	92405A200	0000	4	92405A106	00000


						3 1/2"	5/16"-18	7/8"	2"	3/8"	4,400	6,400	4,000 psi Concrete	12	92405A202	00000	4	92405A108	00000
						4"	5/16"-18	7/8"	2"	3/8"	4,400	6,400	4,000 psi Concrete	12	92405A203	00000	4	92405A111	00000




								1/2" Diameter

								2 3/4"	3/8"-16	1"	2 1/2"	1/2"	6,400	8,000	4,000 psi Concrete	25	92405A300	00000	4	92405A113	00000


								4 3/4"	3/8"-16	1"	2 1/2"	1/2"	6,400	8,000	4,000 psi Concrete	25	92405A302	00000	4	92405A115	00000

Anchors with Flat Head

The flat head creates a flush finish in countersunk holes.

Zinc-Plated Steel—The most common choice for areas with occasional exposure to moisture.

		Thread				Ultimate Strength, lbf					Each		Package
	Lg.	Size	Lg.	Min. Installation Dp.	Drill Bit Size	Pull-Out	Shear	Conditions Tested In	Installation Torque, ft·lbf	Certification		Each	Pkg. Qty.		Pkg.
Zinc-Plated Steel







				3/8" Diameter

				3 3/4"	5/16"-18	7/8"	2"	3/8"	4,400	6,400	4,000 psi Concrete	25	UL Listed	92403A803	00000	10	92403A823	000000


				5"	5/16"-18	7/8"	2"	3/8"	4,400	6,400	4,000 psi Concrete	25	UL Listed	92403A805	0000	10	92403A825	00000
				6"	5/16"-18	7/8"	2"	3/8"	4,400	6,400	4,000 psi Concrete	25	UL Listed	92403A806	0000	10	92403A826	00000




						1/2" Diameter

						5"	3/8"-16	1"	2 1/2"	1/2"	6,400	8,000	4,000 psi Concrete	45	UL Listed	92403A801	0000	10	92403A821	00000




								5/8" Diameter

								5 1/2"	1/2"-13	1 1/8"	2 3/4"	5/8"	7,600	11,600	4,000 psi Concrete	100	UL Listed	92403A802	00000	4	92403A822	00000

Toggle Anchors for Drywall

The toggle locks in place behind your wall to prevent pullout, while fins stop twisting during installation. Unlike traditional toggle bolt anchors, these require a smaller hole and have a flange that covers the hole once installed. Since the gripping force is spread over the length of the toggle, these anchors create a stronger hold than our plug anchors.

To install, fold the anchor in the middle so the toggle wings touch each other. Insert the anchor into a drilled hole and tap it until it's flush with your drywall. Then, use the included tool to pop the anchor open. Next, thread a tapping screw through your component and tighten for a secure hold. You can repeatedly remove your screw without losing strength or the toggle behind the wall. However, the anchor itself cannot be removed.

					Ultimate Strength
For Screw Size	For Wall Thk.	Extended Lg.	Drill Bit Size	Material	Pull-Out, lbf	Shear	Conditions Tested In	Pkg. Qty.		Pkg.
No. 6, No. 7, No. 8, No. 9, No. 10, No. 12, No. 14	3/8" to 1/2"	1 1/4"	5/16"	Polypropylene	140	Not Rated	1/2" Drywall	20	92392A230	00000
No. 6, No. 7, No. 8, No. 9, No. 10, No. 12, No. 14	5/8" to 3/4"	1 3/8"	5/16"	Polypropylene	150	Not Rated	3/4" Drywall	20	92392A240	0000
No. 6, No. 7, No. 8, No. 9, No. 10, No. 12, No. 14	1"	1 3/4"	5/16"	Polypropylene	170	Not Rated	1" Drywall	25	92392A250	00000
No. 8, No. 9, No. 10, No. 12	1/8" to 1/4"	3/4"	5/16"	Polypropylene	120	Not Rated	1/4" Drywall	20	92392A220	0000

Lag Anchors for Block and Brick

Pair with large-diameter wood screws, often called lag screws, to secure heavy wood structures like beams and joists to block, brick, and concrete. As you tighten your screw, these anchors expand while their lobes grip the hole’s walls for a strong hold.

To install, tap the anchor into a drilled hole until it’s flush or slightly below the surface. Then, position your structure, insert a lag screw, and tighten. You can remove your lag screw to disassemble or adjust the structure. However, frequently removing the screw will weaken the strength. The anchor itself cannot be removed.

					Ultimate Strength, lbf
For Screw Size	Lg.	Drill Bit Size	Min. Installation Dp.	Material	Pull-Out	Shear	Conditions Tested In	Pkg. Qty.		Pkg.
1/4"	1"	1/2"	1"	Zinc	240	1,000	4,000 psi Concrete	10	97040A029	00000
1/4"	1 1/2"	1/2"	1 1/2"	Zinc	300	1,000	4,000 psi Concrete	10	97039A029	0000
5/16"	1 1/4"	1/2"	1 1/4"	Zinc	480	1,080	4,000 psi Concrete	10	97040A030	0000
5/16"	1 3/4"	1/2"	1 3/4"	Zinc	520	1,080	4,000 psi Concrete	10	97039A030	0000
3/8"	1 3/4"	5/8"	1 3/4"	Zinc	840	1,400	4,000 psi Concrete	10	97040A031	00000
3/8"	2 1/2"	5/8"	2 1/2"	Zinc	1,000	1,400	4,000 psi Concrete	10	97039A031	00000
1/2"	2"	3/4"	2"	Zinc	1,080	1,600	4,000 psi Concrete	5	97040A033	0000
1/2"	3"	3/4"	3"	Zinc	2,080	1,600	4,000 psi Concrete	5	97039A033	00000
5/8"	2"	7/8"	2"	Zinc	1,200	2,200	4,000 psi Concrete	4	97040A035	0000
5/8"	3 1/2"	7/8"	3 1/2"	Zinc	2,600	2,200	4,000 psi Concrete	4	97039A035	00000
3/4"	3 1/2"	1"	3 1/2"	Zinc	2,800	2,400	4,000 psi Concrete	4	97039A036	00000

Anchors for Hollow Block and Brick

Requiring minimal installation depth, these anchors are best for thin cinder block and hollow core panel walls and ceilings. All expand when fastened to create permanent female-threaded connections that let you remove and reinstall a screw or threaded rod. They fit into smaller holes than toggle anchors for hollow block and brick but are not as strong.

To install, place the anchor into a drilled hole, cone end first. Tap the anchor into the hole until it's flush with the surface. Then, position your component, insert a screw or threaded rod, and tighten.

						Ultimate Strength, lbf
Thread Size	Lg.	Drill Bit Size	Min. Installation Dp.	Sleeve Material	Material	Pull-Out	Shear	Conditions Tested In	Certification	Pkg. Qty.		Pkg.
1/4"-20	7/8"	3/8"	3/4"	Zinc Alloy	Steel	1,080	1,200	4,000 psi Concrete	—	5	97016A972	000000
1/4"-20	7/8"	3/8"	3/4"	304 Stainless Steel	Steel	1,040	1,200	4,000 psi Concrete	—	1	97016A977	0000
5/16"-18	1 5/16"	5/8"	1"	Zinc Alloy	Steel	1,600	1,880	4,000 psi Concrete	—	5	97016A973	00000
3/8"-16	1 5/16"	5/8"	1"	Zinc Alloy	Steel	2,000	2,480	4,000 psi Concrete	FM Approved, UL Listed	5	97016A974	00000
3/8"-16	1 5/16"	5/8"	1"	304 Stainless Steel	Steel	1,800	2,480	4,000 psi Concrete	—	1	97016A978	0000
1/2"-13	1 3/4"	3/4"	1 1/2"	Zinc Alloy	Steel	4,000	4,000	4,000 psi Concrete	FM Approved, UL Listed	1	97016A975	0000
5/8"-11	2"	1"	2 1/4"	Zinc Alloy	Steel	9,200	6,400	4,000 psi Concrete	FM Approved, UL Listed	1	97016A976	0000

Removable Taper-Bolt Anchors for Concrete

Remove the bolt to adjust, move, or replace components. Manufactured in the U.S. with Grade 5 steel, these anchors have over twice the shear strength of our wedge anchors, making them strong enough to secure highway barriers and train tracks. When you tighten them, the tapered bolt expands the nut, spreading the gripping force along its entire length. This creates the higher strength than wedge anchors, where the grip is focused at the wedge. These anchors are more forgiving of variations in hole precision than wedge anchors and require more torque to install. The increased torque puts stress on your base material, so don't use them near edges, corners, or in cracked surfaces.

To install, thread the nut onto the tapered bolt. Drive the anchor through your component into a drilled hole. Then, turn the bolt to expand the nut for a tight hold. You can repeatedly use the bolt in the same hole. To use the bolt in a new hole, a replacement expander nut (sold separately) is required.

Zinc-Plated Steel—The most common choice for areas with occasional exposure to moisture.

	Anchors														Replacement Expander Nuts
						Ultimate Strength, lbf				Each		Package
	Lg.	Thread Lg.	Head Wd.	Min. Installation Dp.	Drill Bit Size	Pull-Out	Shear	Conditions Tested In	Installation Torque, ft·lbf		Each	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
Zinc-Plated Steel







				3/8" Diameter

				2 1/4"	3/4"	9/16"	1 7/8"	3/8"	4,000	6,800	3,000 psi Concrete	40	92914A610	00000	50	92914A612	0000000	10	92914A580	000000


				3"	3/4"	9/16"	1 7/8"	3/8"	4,000	6,800	3,000 psi Concrete	40	92914A630	0000	25	92914A632	00000	10	92914A580	00000
				4"	3/4"	9/16"	1 7/8"	3/8"	4,000	6,800	3,000 psi Concrete	40	92914A640	0000	25	92914A642	00000	10	92914A580	00000




						1/2" Diameter

						2 7/8"	1 1/8"	3/4"	2 3/8"	1/2"	8,000	12,000	3,000 psi Concrete	90	92914A410	0000	25	92914A412	00000	10	92914A530	00000


						4"	1 1/8"	3/4"	2 3/8"	1/2"	8,000	12,000	3,000 psi Concrete	90	92914A420	0000	25	92914A422	000000	10	92914A530	00000
						5"	1 1/8"	3/4"	2 3/8"	1/2"	8,000	12,000	3,000 psi Concrete	90	92914A430	0000	20	92914A432	000000	10	92914A530	00000




								5/8" Diameter

								3 1/2"	1 3/8"	15/16"	2 7/8"	5/8"	9,600	16,800	3,000 psi Concrete	125	92914A440	0000	20	92914A442	000000	10	92914A540	00000


								4 1/2"	1 3/8"	15/16"	2 7/8"	5/8"	9,600	16,800	3,000 psi Concrete	125	92914A450	00000	10	92914A452	00000	10	92914A540	00000




										3/4" Diameter

										4 1/8"	1 1/2"	1 1/8"	3 3/8"	3/4"	11,600	27,200	3,000 psi Concrete	250	92914A460	00000	20	92914A462	000000	5	92914A550	00000


										5 1/2"	1 1/2"	1 1/8"	3 3/8"	3/4"	11,600	27,200	3,000 psi Concrete	250	92914A470	00000	10	92914A472	000000	5	92914A550	00000
										8"	1 1/2"	1 1/8"	3 3/8"	3/4"	11,600	27,200	3,000 psi Concrete	250	92914A480	00000	10	92914A482	000000	5	92914A550	00000




												1" Diameter

												5 5/8"	2 1/8"	1 1/2"	4 5/8"	1"	28,000	36,000	3,000 psi Concrete	550	92914A755	00000	10	92914A752	000000	4	92914A560	00000


												7 1/4"	2 1/8"	1 1/2"	4 5/8"	1"	28,000	36,000	3,000 psi Concrete	550	92914A760	00000	—	———	0	4	92914A560	00000

Drive Rivet Anchors for Concrete

Our strongest drive anchors are best for securing objects such as safety railings and warning signs. All have a rounded head that offers a finished look, won’t snag on objects, and is hard to grip, preventing unwanted removal. Often used for permanent installations, you can't remove your object without yanking the anchor out. These one-piece anchors compress when hammered in and expand inside a drilled hole, creating a powerful grip. No tightening is needed, making them quicker to install than wedge anchors.

To install, hammer the anchor through your object into a drilled hole until the head is flush with the surface. The installation force stresses your base material, so avoid using the anchor near edges, corners, or in cracked surfaces.

Zinc-Plated Steel—The most common choice for areas with occasional exposure to moisture.

Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these anchors won't degrade when exposed to harsh weather, salt water, and most chemicals.

		Head				Ultimate Strength, lbf
	Lg.	Dia.	Ht.	Min. Installation Dp.	Drill Bit Size	Pull-Out	Shear	Conditions Tested In	Certification	Pkg. Qty.		Pkg.
Zinc-Plated Steel







				1/4" Diameter

				1 1/4"	1/2"	1/8"	1 1/8"	1/4"	1,680	2,000	4,000 psi Concrete	FM Approved, UL Listed	25	97073A544	000000


				1 1/2"	1/2"	1/8"	1 1/8"	1/4"	1,680	2,000	4,000 psi Concrete	FM Approved, UL Listed	25	97073A546	00000
				2"	1/2"	1/8"	1 1/8"	1/4"	1,680	2,000	4,000 psi Concrete	FM Approved, UL Listed	25	97073A550	00000
				2 1/2"	1/2"	1/8"	1 1/8"	1/4"	1,680	2,000	4,000 psi Concrete	UL Listed	10	97073A553	0000




						3/8" Diameter

						2"	3/4"	3/16"	1 7/8"	3/8"	4,000	6,800	4,000 psi Concrete	FM Approved, UL Listed	10	97073A620	00000


						2 1/2"	3/4"	3/16"	1 7/8"	3/8"	4,000	6,800	4,000 psi Concrete	FM Approved, UL Listed	10	97073A634	00000
						3 1/2"	3/4"	3/16"	1 7/8"	3/8"	4,000	6,800	4,000 psi Concrete	FM Approved, UL Listed	5	97073A638	00000




								1/2" Diameter

								3"	1"	1/4"	2 5/8"	1/2"	4,800	10,000	4,000 psi Concrete	FM Approved, UL Listed	5	97073A720	00000


								Highly Corrosion-Resistant 316 Stainless Steel







												3/16" Diameter

												1"	7/16"	7/64"	7/8"	3/16"	840	1,200	4,000 psi Concrete	—	10	97073A800	00000


												1 1/2"	7/16"	7/64"	7/8"	3/16"	840	1,200	4,000 psi Concrete	—	5	97073A820	0000
												2"	7/16"	7/64"	7/8"	3/16"	840	1,200	4,000 psi Concrete	—	5	97073A830	0000




														1/4" Diameter

														1 1/4"	1/2"	7/64"	7/8"	1/4"	840	1,680	4,000 psi Concrete	—	5	97073A840	0000


														1 1/2"	1/2"	7/64"	7/8"	1/4"	840	1,680	4,000 psi Concrete	—	5	97073A850	0000
														2"	1/2"	7/64"	7/8"	1/4"	840	1,680	4,000 psi Concrete	—	5	97073A860	00000
														2 1/2"	1/2"	7/64"	7/8"	1/4"	840	1,680	4,000 psi Concrete	—	5	97073A870	00000
														3"	1/2"	7/64"	7/8"	1/4"	840	1,680	4,000 psi Concrete	—	5	97073A880	00000

Toggle Anchors for Hollow Block and Brick

Embed in hollow walls and ceilings to create secure female-threaded connections that let you remove and reinstall a screw or threaded rod. These anchors have the highest pull-out strength of any of our anchors for hollow block and brick, and are made in the U.S. Often used in cinder blocks and hollow core panels, their toggle bar pivots inside hollow cavities for a firm hold. They’re similar to toggle bolt anchors, but require a smaller hole, so you won’t end up with a gaping hole in your block or brick.

To install, push the anchor through your component into a drilled hole and twist it 180°—gravity drops the toggle into position. Pull the anchor to secure. Twist the anchor back 180° to collapse the toggle and remove the anchor.

Thread							Ultimate Strength
Size	Dp.	Lg.	Usable Lg.	Wing Span	Drill Bit Size	Material	Pull-Out, lbf	Shear	Conditions Tested In		Each
3/8"-16	1/2"	2"	1 1/2"	2"	1/2"	Zinc-Yellow-Chromate-Plated Steel	3,200	Not Rated	1,500 psi Concrete	94255A100	000000
1/2"-13	11/16"	2 1/4"	1 5/8"	2"	5/8"	Zinc-Yellow-Chromate-Plated Steel	5,600	Not Rated	1,500 psi Concrete	94255A200	00000

Toggle Bolt Anchor Assortments for Drywall

Keep a variety of toggle bolt anchor sizes and lengths on hand. These classic toggle anchors are best for securing handrails, cabinets, and shelving in drywall. All have a spring-loaded toggle that firmly grips behind your wall. Since the gripping force is spread over the length of the toggle, they create a stronger hold than plug anchors. However, they require a larger hole to push the toggle through, which may need patching if not covered by your component.

No. of Pieces	Toggle Bolts Included	Material	Container Type		Each
100	1/8" × 3" Lg. (25 Pieces) 1/8" × 4" Lg. (25 Pieces) 3/16" × 3" Lg. (15 Pieces) 3/16" × 4" Lg. (15 Pieces) 1/4" × 3" Lg. (10 Pieces) 1/4" × 4" Lg. (10 Pieces)	Zinc-Plated Steel	Plastic Box	97121A600	0000000

Mesh Anchors for Hollow Block and Brick

Create a secure connection that withstands vibration better than any of our other anchors for block and brick. The mesh on these anchors grips adhesive (sold separately), preventing it from running into the cavities of hollow block and brick to secure threaded rods or screws. To achieve the stated strengths, you must use the adhesive listed. A good option for outdoor use, these anchors are made of 18-8 stainless steel to resist rusting while your adhesive seals out moisture.

To install, first fill the mesh anchor with adhesive and press it into a drilled hole. Then, press the tab against your block to hold the anchor in place, and insert a threaded rod or screw. The rod or screw will push the adhesive out of the mesh, forming a plug that keeps the rod or screw in place once the adhesive dries. Once installed, the rod or screw can’t be removed.

Dia.				Ultimate Strength, lbf
For Rod	For Hole	Lg.	Material	Pull-Out	Shear		Each
1/4"	3/8"	2"	18-8 Stainless Steel	1,550	1,900	97178A110	00000
3/8"	1/2"	3 1/2"	18-8 Stainless Steel	1,660	2,070	97178A120	0000
1/2"	5/8"	3 1/2"	18-8 Stainless Steel	2,450	4,460	97178A130	0000
5/8"	3/4"	4 1/2"	18-8 Stainless Steel	2,540	5,040	97178A140	0000

Anchoring Adhesives

Vibration-Resistant Drive Anchors for Block and Brick

Best for securing heavy machinery with constant motion, such as vibrating feeders and conveyors, to walls and floors, these anchors won’t shake loose. As you hammer in the pin, the anchor body expands while the ridges bite into your hole’s walls for a superior grip. These anchors require more force to install than sleeve anchors, so the block and brick you are installing them in should not be worn or cracked.

To install, position the nut and insert the anchor through your machinery into a drilled hole. Then, hammer the pin until it's flush with the top of the bolt, ensuring the anchor is fully set.

Pin Drive Anchors with Hex Nut

You can remove your machinery by unfastening the nut, but the anchor itself cannot be removed without prying out the pin.

Zinc-Plated Steel—The most common choice for areas with occasional exposure to moisture.

		Thread				Ultimate Strength, lbf
	Lg.	Size	Lg.	Min. Installation Dp.	Drill Bit Size	Pull-Out	Shear	Conditions Tested In	Pkg. Qty.		Pkg.
Zinc-Plated Steel







				1/4" Diameter

				1 3/4"	1/4"-20	5/8"	1 1/8"	1/4"	1,480	1,000	4,000 psi Concrete	4	92960A105	00000


				2 3/8"	1/4"-20	3/4"	1 1/8"	1/4"	1,480	1,000	4,000 psi Concrete	4	92960A110	0000




						5/16" Diameter

						2"	5/16"-18	3/4"	1 1/2"	5/16"	3,080	1,280	4,000 psi Concrete	4	92960A115	0000


						2 3/4"	5/16"-18	1"	1 1/2"	5/16"	3,080	1,280	4,000 psi Concrete	4	92960A120	00000




								3/8" Diameter

								2 3/8"	3/8"-16	1"	1 7/8"	3/8"	3,280	3,480	4,000 psi Concrete	4	92960A125	00000


								3 1/2"	3/8"-16	1 1/8"	1 7/8"	3/8"	3,280	3,480	4,000 psi Concrete	4	92960A130	00000
								4 3/4"	3/8"-16	1 3/8"	1 7/8"	3/8"	3,280	3,480	4,000 psi Concrete	4	92960A135	00000




										1/2" Diameter

										2 3/4"	1/2"-13	1"	2 1/2"	1/2"	5,600	4,800	4,000 psi Concrete	4	92960A140	00000


										3 1/2"	1/2"-13	1 1/8"	2 1/2"	1/2"	5,600	4,800	4,000 psi Concrete	4	92960A145	00000
										4 3/4"	1/2"-13	1 3/8"	2 1/2"	1/2"	5,600	4,800	4,000 psi Concrete	4	92960A150	00000
										6"	1/2"-13	1 1/2"	2 1/2"	1/2"	5,600	4,800	4,000 psi Concrete	1	92960A155	0000




												5/8" Diameter

												4"	5/8"-11	1 1/2"	2 3/4"	5/8"	7,600	9,200	4,000 psi Concrete	1	92960A160	0000


												6"	5/8"-11	1 1/2"	2 3/4"	5/8"	7,600	9,200	4,000 psi Concrete	1	92960A170	00000

Pin Drive Anchors with Tamper-Resistant Nut

Image of Product. Front orientation. Contains Annotated, Inset. Anchors. Vibration-Resistant Drive Anchors for Block and Brick, Pin Drive Anchors with Tamper-Resistant Nut.

A tamper-resistant nut prevents the unwanted removal of machinery. Turn the nut round side up for a domed look or flat side up to create a flush finish in countersunk holes. Once set, the nut can’t be removed. The only way to remove the machinery is to pry out the pin and remove the entire anchor.

Steel—Best for dry environments since moisture will cause these anchors to rust.

					Ultimate Strength, lbf
	Lg.	Thread Lg.	Min. Installation Dp.	Drill Bit Size	Pull-Out	Shear	Conditions Tested In	Pkg. Qty.		Pkg.
Steel







				1/4" Diameter

				1 3/4"	5/8"	1"	1/4"	1,280	1,600	4,000 psi Concrete	10	99080A120	000000


				2 3/8"	3/4"	1"	1/4"	1,280	1,600	4,000 psi Concrete	4	99080A140	00000




						3/8" Diameter

						2 3/8"	1"	1 1/2"	3/8"	3,400	3,400	4,000 psi Concrete	4	99080A360	00000


						3 1/2"	1 1/8"	1 1/2"	3/8"	3,400	3,400	4,000 psi Concrete	5	99080A390	00000

Light Duty Drive Rivet Anchors for Block and Brick

A step up from a nail, the rivet head creates a secure connection with a finished look for mounting lightweight signs, screens, and panels. Easier to install than other types of anchors for block and brick, the anchors expand as you hammer in the pin or screw. Since the gripping force is distributed along the entire length of the anchor, it won’t crack soft materials.

To install, insert the anchor through your component and into a drilled hole. Then, hammer the pin or screw until it's flush with the anchor's head, which expands the anchor body.

Pin Drive Anchors

To remove, pry out the pin and then pull out the anchor.

		Head						Ultimate Strength
	Lg.	Dia.	Ht.	Min. Installation Dp.	Drill Bit Size	Pin Material	Material	Pull-Out	Shear	Pkg. Qty.		Pkg.
3/16" Diameter



		3/4"	9/16"	1/8"	3/4"	3/16"	Zinc-Plated Steel	Nylon	Not Rated	Not Rated	100	97066A017	000000


		1"	9/16"	1/8"	1"	3/16"	Zinc-Plated Steel	Nylon	Not Rated	Not Rated	100	97066A010	00000


		1/4" Diameter



				3/4"	9/16"	7/64"	3/4"	1/4"	Acetal	Nylon	Not Rated	Not Rated	100	97067A050	00000


				3/4"	9/16"	1/8"	3/4"	1/4"	Zinc-Plated Steel	Nylon	Not Rated	Not Rated	100	97066A013	00000
				1"	9/16"	7/64"	1"	1/4"	Acetal	Nylon	Not Rated	Not Rated	100	97067A051	00000
				1"	9/16"	1/8"	1"	1/4"	Zinc-Plated Steel	Nylon	Not Rated	Not Rated	100	97066A016	00000
				1 1/2"	9/16"	7/64"	1 1/2"	1/4"	Acetal	Nylon	Not Rated	Not Rated	100	97067A052	00000
				1 1/2"	9/16"	1/8"	1 1/2"	1/4"	Zinc-Plated Steel	Nylon	Not Rated	Not Rated	100	97066A043	00000

Easy-Release Screw Drive Anchors

To remove, unthread the screw to release the anchor's grip and then pull out the anchor.

		Head						Ultimate Strength
	Lg.	Dia.	Ht.	Min. Installation Dp.	Drill Bit Size	Screw Material	Material	Pull-Out	Shear	Pkg. Qty.		Pkg.
3/16" Diameter



		1"	7/16"	1/8"	1"	3/16"	Zinc-Plated Steel	Nylon	Not Rated	Not Rated	100	97066A020	000000


		1/4" Diameter



				1"	7/16"	1/8"	1"	1/4"	Zinc-Plated Steel	Nylon	Not Rated	Not Rated	100	97066A026	00000


				1 1/2"	7/16"	1/8"	1 1/2"	1/4"	Zinc-Plated Steel	Nylon	Not Rated	Not Rated	100	97066A028	00000

Stud-Style Toggle Anchors for Drywall

Commonly used to install standoffs to mount signs or panels, these anchors create threaded-stud connections that stay put. All have a spring-loaded toggle that firmly grips behind your wall for a secure hold. Since the gripping force is spread over the length of the toggle, they create a stronger hold than plug anchors. However, they require a larger hole to push the toggle through, which may need patching if not covered by your component.

To install, insert the stud through your component and thread on the toggle. Then, fold the toggle wings flush against the stud and push them through a drilled hole until they pop open on the other side. Next, pull back on the stud and thread on a nut to secure. The stud is reusable, but the toggle will fall behind the wall when the stud is removed.

			Thread					Ultimate Strength		Adapter
	Lg.	Usable Lg.	Size	Lg.	Drill Bit Size	Wing Span	Material	Pull-Out	Shear	Thread Size	Lg.		Each
3/16" Diameter



		3"	1 1/2"	10-24	3"	1/2"	2"	Zinc-Plated Steel	Not Rated	Not Rated	5/16"-18	1/2"	94706A992	00000


		5/16" Diameter



				3"	1 1/2"	5/16"-18	3"	7/8"	3 15/16"	Zinc-Plated Steel	Not Rated	Not Rated	—	—	94706A990	0000

Light Duty Drive Rivet Anchors for Concrete

More secure than masonry nails but not as strong as other anchors for concrete, these are often used to mount lightweight signs and control panels. Also known as tap-in rivets, they’re barbed to resist pullout after being hammered into a hole. All have a rounded head for a finished look that won’t snag on objects.

To install, hammer the anchor through your component into a drilled hole that’s slightly longer than the anchor until the head is flush with the surface. The anchor will compress and then expand inside the hole. To remove, pry out the anchor.

Nylon—Strong, durable, and economical. Best for dry environments, these anchors will swell and weaken when exposed to moisture.

		Head				Ultimate Strength, lbf
	Lg.	Dia.	Ht.	Min. Installation Dp.	Drill Bit Size	Pull-Out	Shear	Conditions Tested In	Pkg. Qty.		Pkg.
Nylon







				9/32" Diameter

				1"	5/8"	1/8"	1"	1/4"	140	220	4,000 psi Concrete	100	92410A411	000000


				1 5/8"	5/8"	1/8"	1"	1/4"	140	220	4,000 psi Concrete	50	92410A412	00000
				2 1/8"	5/8"	1/8"	1"	1/4"	140	220	4,000 psi Concrete	50	92410A413	00000
				2 5/8"	5/8"	1/8"	1"	1/4"	140	220	4,000 psi Concrete	25	92410A414	00000
				3 1/8"	5/8"	1/8"	1"	1/4"	140	220	4,000 psi Concrete	25	92410A415	00000

Reusable Anchor Assortments for Drywall


	Installation Tools

Keep a variety of reusable anchor sizes and lengths on hand for installing signs and other objects you’d like to swap out. All of these anchors have a bolt that you can repeatedly remove without affecting the anchor. The sleeve expands behind the wall, creating a mushroom-shape grip for a secure hold. Teeth on the flange bite the drywall surface, so the anchor won’t twist when you remove and reinstall the screw. While the bolt can be removed, the anchor itself cannot.

To install, tap or drill the anchor into a drilled hole so it's flush with your drywall. Then, thread a machine screw through your object and tighten to expand the anchor. For repetitive installations, use the optional installation tool. It inserts the screw and expands the anchor with a single squeeze of the handle, speeding up the setup time.

Anchors							Installation Tools
	Drywall Anchors Included
No. of Pieces	Hammer In	Drill In	Material	Container Type		Each		Each
230	6-32 × 1 5/16" (50 Pieces) 6-32 × 1 11/16" (25 Pieces) 6-32 × 2 1/4" (25 Pieces)	6-32 × 1" (25 Pieces) 6-32 × 1 1/2" (25 Pieces) 6-32 × 2" (25 Pieces) 6-32 × 2 1/2" (20 Pieces) 10-24 × 2 1/4" (10 Pieces) 10-24 × 2 3/4" (10 Pieces) 1/4"-20 × 2 1/4" (10 Pieces) 1/4"-20 × 2 3/4" (5 Pieces)	Steel	Plastic Box	90228A211	0000000	90228A110	000000

Wedge Anchors for Concrete

Drilling Anchors for Drywall

Anchors for Concrete

Anchors for Drywall

Vibration-Resistant Wedge Anchors for Concrete

Compatible Products for This Anchor

High-Strength Toggle Anchors for Drywall

Light Duty Anchors for Block and Brick

Sleeve Anchors for Block and Brick

High-Strength Anchors for Concrete

Toggle Bolt Anchors for Drywall

Hook Anchors for Concrete

Drilling Toggle Anchors for Drywall

High-Strength Anchors for Block and Brick

Weld Anchors for Concrete

Stud-Style Drilling Anchors for Drywall

Hammer-In Anchors for Drywall

Stud-Style Toggle Anchors for Hollow Block and Brick

Reusable Anchors for Drywall

Drive Rivet Anchors for Block and Brick

Quick-Twist Anchors for Concrete

Shallow-Install Anchors for Block and Brick

Anchors for Block and Brick

Bolt-Style Sleeve Anchors for Block and Brick

Toggle Anchors for Drywall

Lag Anchors for Block and Brick

Anchors for Hollow Block and Brick

Removable Taper-Bolt Anchors for Concrete

Drive Rivet Anchors for Concrete

Toggle Anchors for Hollow Block and Brick

Toggle Bolt Anchor Assortments for Drywall

Mesh Anchors for Hollow Block and Brick

Vibration-Resistant Drive Anchors for Block and Brick

Light Duty Drive Rivet Anchors for Block and Brick

Stud-Style Toggle Anchors for Drywall

Light Duty Drive Rivet Anchors for Concrete

Reusable Anchor Assortments for Drywall