9473T121 | Adjacent Jumper

Filter by

Number of Circuits

For Wire Gauge

Mounting Location

Wire Connection

Spring-Clamp Terminal

Stud Terminal

System of Measurement

Voltage

Number of Terminals per Circuit

Color

Width

DIN Rail Height

Current per Circuit

DIN Rail Trade Size

Electrical Connection

Lever-Clamp Terminal

Screw Terminal

Screw-Clamp Terminal

Spring-Clamp Terminal

Performance

Length

Certification

C-UL Recognized Component

UL Recognized Component

Height

Number of Mounting Holes

Terminal Center-to-Center

Terminal Size

Maximum Temperature

RoHS

Compliant with Exemptions

Not Compliant

REACH

Compliant

Not Compliant

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Exempt

Forward

How can we improve?

699 Products

Modular DIN-Rail Mount Terminal Blocks

Mix and match these terminal blocks to get the exact number of circuits you need in a single setup. Add blocks for thermocouples, fuses, and grounding wire as needed. The blocks clip side by side onto DIN rail in control panels, creating tidy rows of circuits that you can identify and access on the spot.

The screw-clamp terminals flatten your wire so it stays put when vibrated or pulled. If you need to change wiring frequently without adjusting a screw, consider a quick-connect terminal block with spring-clamp or lever-clamp terminals.

Terminal Blocks with Screw-Clamp Terminals

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Bar Jumpers—Metal poles create an electrical connection between blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit. Cut jumpers to size with a hacksaw or high-force wire cutter. Add covers so jumpers don't touch the screws on the outermost blocks.

Insulation—Terminal blocks with insulated jumpers maintain their IP20 rating to prevent shocks and short circuits. Blocks with noninsulated jumpers lose their IP20 rating for touch protection because the jumpers introduce exposed metal to the circuit.

	Terminal Blocks											Covers		End Stops		Bar Jumpers
										Each
	No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	For DIN Rail Trade Size	Enclosure Rating	Choose a Color		1-24	25-Up		Each		Each	Insulation		Each







				380V AC—22 amp per Circuit

				3	2	20 to 12	6	81	3	IP20	Gray	7641K361	00000	00000	7641K275	00000	7641K73	00000	Noninsulated	7641K281	00000




						600V AC—32 amp per Circuit

						1	6	22 to 12	6	87.5	1, 3	IP20	Black	7641K843	00000	00000	———	0	———	0	—	———	0




								630V AC/630V DC—24 amp per Circuit

								2	2	22 to 12	5	65.5	1, 3	IP20	Beige	7641K846	0000	0000	7641K72	0000	7641K757	0000	Insulated	7641K758	00000


								2	2	22 to 12	5	65.5	1, 3	IP20	Blue	7641K845	0000	0000	7641K72	0000	7641K757	0000	Insulated	7641K758	00000
								2	2	22 to 12	5	65.5	1, 3	IP20	Gray	7641K844	0000	0000	7641K72	0000	7641K757	0000	Insulated	7641K758	00000




										800V AC—32 amp per Circuit

										2	2	22 to 12	6	65.5	1, 3	IP20	Beige, Black, Blue, Gray, Green, Orange, Red, White, Yellow	7641K71	0000	0000	7641K72	0000	7641K73	0000	Noninsulated	7641K74	00000




												800V AC/800V DC—32 amp per Circuit

												1	3	22 to 10	6	51.5	1, 3	IP20	Gray	7641K841	0000	0000	7641K754	0000	7641K35	0000	Insulated	7641K755	00000


												1	4	22 to 10	6	63.5	1, 3	IP20	Gray	7641K842	0000	0000	7641K756	0000	7641K35	0000	Insulated	7641K755	00000




														800V AC—41 amp per Circuit

														2	2	18 to 8	8	88	1, 3	IP20	Gray	7641K241	0000	0000	7641K251	0000	7641K73	0000	Noninsulated	7641K16	00000




																1,000V AC—24 amp per Circuit

																1	2	22 to 12	5	44.5	1, 3	IP20	Beige, Black, Blue, Gray, Orange, Red, White, Yellow	7641K921	0000	0000	7641K31	0000	7641K35	0000	Noninsulated	7641K925	0000




																		1,000V AC—32 amp per Circuit

1	2																	22 to 10	6	44.5	1, 3	IP20	Beige, Black, Blue, Gray, Green, Orange, Red, White, Yellow	7641K51	0000	0000	7641K31	0000	7641K35	0000	Noninsulated	7641K15	0000




		1,000V AC—41 amp per Circuit

		1	2															22 to 8	8	44.5	1, 3	IP20	Beige, Black, Blue, Gray, Green, Orange, Red, White, Yellow	7641K52	0000	0000	7641K31	0000	7641K35	0000	Noninsulated	7641K16	00000




				1,000V AC—57 amp per Circuit

				1	2													20 to 6	10	44.5	1, 3	IP20	Beige, Black, Blue, Gray, Red, White, Yellow	7641K53	0000	0000	7641K31	0000	7641K35	0000	Noninsulated	7641K17	00000




																		1,000V AC—76 amp per Circuit

						1	2											18 to 6	12	45.5	1, 3	IP20	Black, Blue, Gray, Red, White, Yellow	7641K151	0000	0000	7641K192	0000	7641K35	0000	Noninsulated	7641K221	00000




																		1,000V AC—125 amp per Circuit

																		1	2	10 to 1/0	16	49	1, 3	IP20	Black, Blue, Gray, Red, White, Yellow	7641K161	0000	0000	———	0	7641K35	0000	Noninsulated	7641K231	00000

Markers

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1, 2	5	—	100	White	7641K983	00000	00000


		1, 2	6	—	100	White	7641K19	0000	0000
		1, 2	8, 10, 12, 13, 16, 22	—	100	White	7641K981	0000	0000


		Numbered for Horizontal Rails



				1, 2	5	1 to 100	100	White	7641K95	0000	0000


				1, 2	5	101 to 200	100	White	7641K96	0000	0000
				1, 2	6	1 to 100	100	White	7641K75	0000	0000
				1, 2	6	101 to 200	100	White	7641K76	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	7641K991	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	7641K992	0000	0000


				Numbered for Vertical Rails



						1, 2	5	1 to 100	100	White	7641K97	0000	0000


						1, 2	5	101 to 200	100	White	7641K98	0000	0000
						1, 2	6	1 to 100	100	White	7641K77	0000	0000
						1, 2	6	101 to 200	100	White	7641K78	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	7641K993	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	7641K994	0000	0000

Ground Terminal Blocks with Screw-Clamp Terminals

Connect grounding wire to DIN rail so fault currents can safely flow to ground. These terminal blocks should only be used for grounding circuits.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks											End Stops
									Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size	Enclosure Rating		1-24	25-Up		Each



	1	2	22 to 12	5	43.5	Green/Yellow	1, 3	IP20	7641K931	00000	00000	7641K35	00000


	1	2	22 to 12	6	43.8	Green/Yellow	1, 3	IP20	7641K81	0000	0000	7641K35	0000
	1	2	22 to 8	8	43.8	Green/Yellow	1, 3	IP20	7641K82	0000	0000	7641K35	0000
	1	2	20 to 6	10	43.8	Green/Yellow	1, 3	IP20	7641K83	0000	0000	7641K35	0000
	1	2	14 to 4	12	49.5	Green/Yellow	1, 3	IP20	7641K171	0000	0000	7641K35	0000
	1	2	8 to 1/0	16	49	Green/Yellow	1, 3	IP20	7641K181	00000	0000	7641K35	0000
	1	4	22 to 10	6	63.5	Green/Yellow	1, 3	IP20	7641K847	0000	0000	7641K35	0000
	1	7	22 to 12	6	90	Green/Yellow	1, 3	IP20	7641K848	00000	00000	7641K757	0000

Markers

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1, 2	5	—	100	White	7641K983	00000	00000


		1, 2	6	—	100	White	7641K19	0000	0000
		1, 2	8, 10, 12, 13, 16, 22	—	100	White	7641K981	0000	0000


		Numbered for Horizontal Rails



				1, 2	5	1 to 100	100	White	7641K95	0000	0000


				1, 2	5	101 to 200	100	White	7641K96	0000	0000
				1, 2	6	1 to 100	100	White	7641K75	0000	0000
				1, 2	6	101 to 200	100	White	7641K76	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	7641K991	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	7641K992	0000	0000


				Numbered for Vertical Rails



						1, 2	5	1 to 100	100	White	7641K97	0000	0000


						1, 2	5	101 to 200	100	White	7641K98	0000	0000
						1, 2	6	1 to 100	100	White	7641K77	0000	0000
						1, 2	6	101 to 200	100	White	7641K78	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	7641K993	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	7641K994	0000	0000

Fuse Terminal Blocks with Screw-Clamp Terminals

Install a fuse in the built-in fuse holder so excess current doesn't damage your equipment. If the current exceeds the limit, the fuse will blow and cut power to connected components.

Blown Fuse Indicator—A light goes on when the fuse blows, so you can spot an overloaded circuit without cutting power or touching equipment.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

	Terminal Blocks																	Covers		End Stops		Bar Jumpers
						For Fuse										Each
	No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Trade Size	Overall Dia.	Overall Lg.	Type	Circuit Status Indicator Type	Blown Fuse Indicator Voltage	For DIN Rail Trade Size	Enclosure Rating	Choose a Color		1-24	25-Up		Each		Each	Insulation		Each







				300V AC/300V DC—6.3 amp per Circuit

				2 1 (Ground)	2 1 (Ground)	20 to 12	8	99	—	5 mm	20 mm	Ceramic, Glass	—	—	3	IP20	Gray	7641K861	000000	000000	7641K765	00000	7641K757	00000	Noninsulated	7641K16	000000


				2 1 (Ground)	2 1 (Ground)	20 to 12	8	99	—	5 mm	20 mm	Ceramic, Glass	Blown Fuse	24V DC 60V DC 110V AC	3	IP20	Gray	7641K864	00000	00000	7641K765	0000	7641K757	0000	Noninsulated	7641K16	00000
				2 1 (Ground)	2 1 (Ground)	20 to 12	8	99	—	5 mm	20 mm	Ceramic, Glass	Blown Fuse	110V AC 230V AC	3	IP20	Gray	7641K865	00000	00000	7641K765	0000	7641K757	0000	Noninsulated	7641K16	00000




						400V AC/400V DC—6.3 amp per Circuit

						1	2	22 to 12	8	56	—	5 mm	20 mm	Ceramic, Glass	Blown Fuse	24V AC 24V DC	1, 3	IP20	Gray	7641K943	00000	00000	7641K37	0000	7641K35	0000	—	———	0


						1	2	22 to 12	8	56	—	5 mm	20 mm	Ceramic, Glass	Blown Fuse	110V AC 230V AC	1, 3	IP20	Gray	7641K942	00000	00000	7641K37	0000	7641K35	0000	—	———	0




								600V AC—6.3 amp per Circuit

								2	2	24 to 12	8	85.5	—	5 mm	20 mm	Ceramic, Glass	Blown Fuse	110V AC 230V AC	1, 3	IP20	Gray	7641K863	00000	00000	7641K759	0000	7641K757	0000	Insulated	7641K764	00000


								2	2	12	8	85.5	—	5 mm	20 mm	Ceramic, Glass	Blown Fuse	24V AC 24V DC	1, 3	IP20	Gray	7641K862	00000	00000	7641K759	0000	7641K757	0000	Insulated	7641K764	00000




										630V AC—6.3 amp per Circuit

										1	2	22 to 12	8	56	—	5 mm	20 mm	Ceramic, Glass	—	—	1, 3	IP20	Gray, Orange	7641K55	0000	0000	7641K37	0000	7641K35	0000	—	———	0




												630V AC/630V DC—6.3 amp per Circuit

												2	2	24 to 12	8	85.5	—	5 mm	20 mm	Ceramic, Glass	—	—	1, 3	IP20	Gray	7641K849	00000	00000	7641K759	0000	7641K757	0000	Insulated	7641K764	00000




														800V AC/800V DC—10 amp per Circuit

														1	2	22 to 10	13	85.1	3AG	1/4"	—	Glass	Blown Fuse	24V AC 24V DC	1, 3	IP20	Black	7641K946	00000	00000	7641K49	0000	7641K35	0000	—	———	0


														1	2	22 to 10	13	85.1	3AG	1/4"	—	Glass	Blown Fuse	110V AC 230V AC	1, 3	IP20	Black	7641K945	00000	00000	7641K49	0000	7641K35	0000	—	———	0




																800V AC—16 amp per Circuit

1																2	22 to 10	13	85.1	3AG	1/4"	—	Glass	—	—	1, 3	IP20	Black	7641K36	00000	0000	7641K49	0000	7641K35	0000	—	———	0




		800V AC—30 amp per Circuit

		1	2													18 to 6	22	90.7	—	13/32"	1 1/2"	Cartridge	—	—	1, 3	IP20	Gray	7641K932	00000	00000	———	0	7641K35	0000	—	———	0

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1, 2	8, 10, 12, 13, 16, 22	—	100	White	7641K981	00000	00000


		Numbered for Horizontal Rails



				1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	7641K991	0000	0000


				1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	7641K992	0000	0000


				Numbered for Vertical Rails



						1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	7641K993	0000	0000


						1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	7641K994	0000	0000

Disconnect Terminal Blocks with Screw-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Modular DIN-Rail Mount Terminal Blocks, Disconnect Terminal Blocks with Screw-Clamp Terminals.

Test and troubleshoot circuits without removing any wire. Flip the tab by hand or with a screwdriver to open and close the circuit.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Adjacent Jumpers—Metal poles create an electrical connection between adjacent terminal blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit.

Terminal Blocks											Covers		End Stops		Adjacent Jumpers
									Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size	Enclosure Rating		1-24	25-Up		Each		Each	Insulation		Each







			320V AC/320V DC—10 amp per Circuit

			1	2	12	5	44.5	Gray/Orange	1, 3	IP20	7641K869	00000	00000	7641K31	00000	7641K35	00000	Noninsulated	7641K767	00000




					400V AC—15 amp per Circuit

					1	2	22 to 10	8	47	Gray	1, 3	IP20	7641K88	0000	0000	7641K881	0000	7641K35	0000	Insulated	7641K873	0000




							400V AC—20 amp per Circuit

							1	2	22 to 10	6	44.5	Gray	1, 3	IP20	7641K87	0000	0000	7641K871	0000	7641K35	0000	Insulated	7641K883	0000

Markers

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1, 2	5	—	100	White	7641K983	00000	00000


		1, 2	6	—	100	White	7641K19	0000	0000
		1, 2	8, 10, 12, 13, 16, 22	—	100	White	7641K981	0000	0000


		Numbered for Horizontal Rails



				1, 2	5	1 to 100	100	White	7641K95	0000	0000


				1, 2	5	101 to 200	100	White	7641K96	0000	0000
				1, 2	6	1 to 100	100	White	7641K75	0000	0000
				1, 2	6	101 to 200	100	White	7641K76	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	7641K991	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	7641K992	0000	0000


				Numbered for Vertical Rails



						1, 2	5	1 to 100	100	White	7641K97	0000	0000


						1, 2	5	101 to 200	100	White	7641K98	0000	0000
						1, 2	6	1 to 100	100	White	7641K77	0000	0000
						1, 2	6	101 to 200	100	White	7641K78	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	7641K993	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	7641K994	0000	0000

Disconnect Terminal Blocks with Test Sockets and Screw-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Modular DIN-Rail Mount Terminal Blocks, Disconnect Terminal Blocks with Test Sockets and Screw-Clamp Terminals.

Plug voltage meters into the built-in sockets to confirm the voltage is right for your application. You can also test and troubleshoot circuits without removing any wire. Push, turn, and release the knob to break your connection. When the knob is released, stick a wire through the hole so you can't accidentally reconnect the circuit—similar to a lockout tag.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks											Covers		End Stops		Adjacent Jumpers			Test Plugs
									Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size	Enclosure Rating		1-24	25-Up		Each		Each	Insulation		Each		Each







			500V AC/500V DC—15 amp per Circuit

			1	2	22 to 8	8	55.5	Gray/Black	1, 3	IP10	7641K867	00000	00000	7641K766	00000	7641K35	00000	Insulated	7641K873	00000	7641K768	00000


			1	2	22 to 8	8	55.5	Gray/Red	1, 3	IP10	7641K868	0000	0000	7641K766	0000	7641K35	0000	Insulated	7641K873	0000	7641K768	0000
			1	2	22 to 8	8	55.5	Gray/Yellow	1, 3	IP10	7641K866	0000	0000	7641K766	0000	7641K35	0000	Insulated	7641K873	0000	7641K768	0000

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1, 2	8, 10, 12, 13, 16, 22	—	100	White	7641K981	00000	00000


		Numbered for Horizontal Rails



				1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	7641K991	0000	0000


				1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	7641K992	0000	0000


				Numbered for Vertical Rails



						1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	7641K993	0000	0000


						1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	7641K994	0000	0000

Thermocouple Terminal Blocks with Screw-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Modular DIN-Rail Mount Terminal Blocks, Thermocouple Terminal Blocks with Screw-Clamp Terminals.

Run your thermocouple wire into these blocks so no signal is lost or destroyed. The metal in the terminals is compatible with multiple thermocouple wire types.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks												Covers		End Stops
										Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	For Thermocouple Wire Type	Color	For DIN Rail Trade Size	Enclosure Rating		1-24	25-Up		Each		Each







			500V AC/500V DC

			1	2	18 to 16	6	44.5	J, K, T	Gray	1, 3	IP20	7641K381	000000	000000	7641K31	00000	7641K35	00000

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1, 2	6	—	100	White	7641K19	00000	00000


		Numbered for Horizontal Rails



				1, 2	6	1 to 100	100	White	7641K75	0000	0000


				1, 2	6	101 to 200	100	White	7641K76	0000	0000


				Numbered for Vertical Rails



						1, 2	6	1 to 100	100	White	7641K77	0000	0000


						1, 2	6	101 to 200	100	White	7641K78	0000	0000

Terminal Blocks

Also known as barrier terminal strips, these blocks have dividers to separate live wires and keep your setup tidy. Mount them directly onto control panels, enclosures, and equipment.

A screw or stud connection creates a tight hold on the wire. You can insert stripped wire directly or attach a terminal to prevent damage from the fastener. Ring, spade, and hook terminals fit around the shank and hang on tightly, even in high-vibration setups. Pin terminals, blade terminals, and wire ferrules are easier to secure with the screw or stud. However, they don't stay put as well as other terminals when vibrated or pulled.

For DIN 3 Rails—Unlike other surface-mount terminal blocks, these have a notch that snaps onto DIN 3 rail. You can also screw them directly onto your control panel or other surface.

Covers—Snap onto the top of a terminal block to prevent accidental contact with a live wire. These covers include mounting clips that fit between the block and mounting screws.

Markers—Label your terminal block connections so you can identify them at a glance. These markers extend from underneath the terminal block.

	Terminal Blocks															Covers		Markers
												Mounting Holes
	No. of Circuits	For Wire Ga.	Wire Connection	Terminal Size	Terminal Ctr.-to-Ctr.	Lg.	Wd.	Ht.	Max. Temp., ° F	Color	For DIN Rail Trade Size	Dia.	No. of		Each		Each		Each







				300V AC/300V DC—20 amp per Circuit

				2	22 to 12	Screw Terminal	No. 6	3/8"	1 7/16"	7/8"	1/2"	257	Black	—	0.17"	4	7527K42	00000	7527K826	00000	7527K151	00000


				3	22 to 12	Screw Terminal	No. 6	3/8"	1 3/4"	7/8"	1/2"	257	Black	—	0.17"	4	7527K43	0000	7527K827	0000	7527K152	0000
				4	22 to 12	Screw Terminal	No. 6	3/8"	2 3/16"	7/8"	1/2"	257	Black	—	0.17"	4	7527K44	0000	7527K828	0000	7527K153	0000
				5	22 to 12	Screw Terminal	No. 6	3/8"	2 1/2"	7/8"	1/2"	257	Black	—	0.17"	4	7527K45	0000	7527K829	0000	7527K154	0000
				6	22 to 12	Screw Terminal	No. 6	3/8"	2 15/16"	7/8"	1/2"	257	Black	—	0.17"	4	7527K46	0000	7527K831	0000	7527K155	0000
				7	22 to 12	Screw Terminal	No. 6	3/8"	3 1/4"	7/8"	1/2"	257	Black	—	0.17"	4	7527K47	0000	7527K832	0000	7527K156	0000
				8	22 to 12	Screw Terminal	No. 6	3/8"	3 11/16"	7/8"	1/2"	257	Black	—	0.17"	4	7527K48	0000	7527K833	0000	7527K157	0000
				9	22 to 12	Screw Terminal	No. 6	3/8"	4"	7/8"	1/2"	257	Black	—	0.17"	4	7527K49	0000	7527K834	0000	7527K158	0000
				10	22 to 12	Screw Terminal	No. 6	3/8"	4 7/16"	7/8"	1/2"	257	Black	—	0.17"	4	7527K51	0000	7527K835	0000	7527K159	0000
				12	22 to 12	Screw Terminal	No. 6	3/8"	5 3/16"	7/8"	1/2"	257	Black	—	0.17"	4	7527K53	0000	7527K836	0000	7527K161	0000
				14	22 to 12	Screw Terminal	No. 6	3/8"	5 15/16"	7/8"	1/2"	257	Black	—	0.17"	4	7527K54	0000	7527K837	0000	7527K162	0000


				16	22 to 12	Screw Terminal	No. 6	3/8"	6 11/16"	7/8"	1/2"	257	Black	—	0.17"	4	7527K55	00000	7527K838	0000	7527K163	0000
				18	22 to 12	Screw Terminal	No. 6	3/8"	7 7/16"	7/8"	1/2"	257	Black	—	0.17"	4	7527K56	00000	7527K839	0000	7527K164	0000
				20	22 to 12	Screw Terminal	No. 6	3/8"	8 3/16"	7/8"	1/2"	257	Black	—	0.17"	4	7527K41	00000	7527K841	0000	7527K165	0000




						300V AC/300V DC—30 amp per Circuit

						2	22 to 12	Screw Terminal	No. 6	7/16"	1 5/8"	1 1/8"	1/2"	257	Black	—	0.18"	4	7527K62	0000	7527K936	0000	7527K171	0000


						3	22 to 12	Screw Terminal	No. 6	7/16"	2 1/16"	1 1/8"	1/2"	257	Black	—	0.18"	4	7527K63	0000	7527K937	0000	7527K172	0000
						4	22 to 12	Screw Terminal	No. 6	7/16"	2 1/2"	1 1/8"	1/2"	257	Black	—	0.18"	4	7527K64	0000	7527K938	0000	7527K173	0000
						5	22 to 12	Screw Terminal	No. 6	7/16"	2 15/16"	1 1/8"	1/2"	257	Black	—	0.18"	4	7527K65	0000	7527K939	0000	7527K174	0000
						6	22 to 12	Screw Terminal	No. 6	7/16"	3 3/8"	1 1/8"	1/2"	257	Black	—	0.18"	4	7527K66	0000	7527K941	0000	7527K175	0000
						7	22 to 12	Screw Terminal	No. 6	7/16"	3 13/16"	1 1/8"	1/2"	257	Black	—	0.18"	4	7527K67	0000	7527K942	0000	7527K176	0000
						8	22 to 12	Screw Terminal	No. 6	7/16"	4 1/4"	1 1/8"	1/2"	257	Black	—	0.18"	4	7527K68	00000	7527K943	0000	7527K177	0000
						9	22 to 12	Screw Terminal	No. 6	7/16"	4 11/16"	1 1/8"	1/2"	257	Black	—	0.18"	4	7527K69	00000	7527K944	0000	7527K178	0000
						10	22 to 12	Screw Terminal	No. 6	7/16"	5 1/8"	1 1/8"	1/2"	257	Black	—	0.18"	4	7527K71	00000	7527K945	0000	7527K179	0000
						12	22 to 12	Screw Terminal	No. 6	7/16"	6"	1 1/8"	1/2"	257	Black	—	0.18"	4	7527K73	00000	7527K946	0000	7527K181	0000
						14	22 to 12	Screw Terminal	No. 6	7/16"	6 7/8"	1 1/8"	1/2"	257	Black	—	0.18"	4	7527K74	00000	7527K947	0000	7527K182	0000


						16	22 to 12	Screw Terminal	No. 6	7/16"	7 3/4"	1 1/8"	1/2"	257	Black	—	0.18"	4	7527K75	00000	7527K948	0000	7527K183	0000
						18	22 to 12	Screw Terminal	No. 6	7/16"	8 5/8"	1 1/8"	1/2"	257	Black	—	0.18"	4	7527K76	00000	7527K949	0000	7527K184	0000
						20	22 to 12	Screw Terminal	No. 6	7/16"	9 1/2"	1 1/8"	1/2"	257	Black	—	0.18"	4	7527K61	00000	7527K951	0000	7527K185	0000




								600V AC/600V DC—20 amp per Circuit

								2	22 to 12	Screw Terminal	No. 6	7/16"	1 5/8"	1 3/8"	3/4"	257	Black	—	0.18"	4	5566T81	0000	5566T621	00000	5566T111	0000


								3	22 to 12	Screw Terminal	No. 6	7/16"	2 1/16"	1 3/8"	3/4"	257	Black	—	0.18"	4	5566T82	0000	5566T622	00000	5566T112	0000
								4	22 to 12	Screw Terminal	No. 6	7/16"	2 1/2"	1 3/8"	3/4"	257	Black	—	0.18"	4	5566T83	0000	5566T623	00000	5566T113	0000
								5	22 to 12	Screw Terminal	No. 6	7/16"	2 15/16"	1 3/8"	3/4"	257	Black	—	0.18"	4	5566T84	0000	5566T624	00000	5566T114	0000
								6	22 to 12	Screw Terminal	No. 6	7/16"	3 3/8"	1 3/8"	3/4"	257	Black	—	0.18"	4	5566T85	00000	5566T625	00000	5566T115	0000
7								22 to 12	Screw Terminal	No. 6	7/16"	3 13/16"	1 3/8"	3/4"	257	Black	—	0.18"	4	5566T86	00000	5566T626	00000	5566T116	0000
8	22 to 12							Screw Terminal	No. 6	7/16"	4 1/4"	1 3/8"	3/4"	257	Black	—	0.18"	4	5566T87	00000	5566T627	00000	5566T117	0000
9	22 to 12							Screw Terminal	No. 6	7/16"	4 11/16"	1 3/8"	3/4"	257	Black	—	0.18"	4	5566T88	00000	5566T628	00000	5566T118	0000
10	22 to 12							Screw Terminal	No. 6	7/16"	5 1/8"	1 3/8"	3/4"	257	Black	—	0.18"	4	5566T89	00000	5566T629	00000	5566T119	0000
12	22 to 12							Screw Terminal	No. 6	7/16"	6"	1 3/8"	3/4"	257	Black	—	0.18"	4	5566T91	00000	5566T631	00000	5566T121	0000
14	22 to 12	Screw Terminal						No. 6	7/16"	6 7/8"	1 3/8"	3/4"	257	Black	—	0.18"	4	5566T92	00000	5566T632	00000	5566T122	0000


16	22 to 12	Screw Terminal	No. 6					7/16"	7 3/4"	1 3/8"	3/4"	257	Black	—	0.18"	4	5566T93	00000	5566T633	00000	5566T123	0000
18	22 to 12	Screw Terminal	No. 6					7/16"	8 5/8"	1 3/8"	3/4"	257	Black	—	0.18"	4	5566T94	00000	5566T634	00000	5566T124	0000
20	22 to 12	Screw Terminal	No. 6					7/16"	9 1/2"	1 3/8"	3/4"	257	Black	—	0.18"	4	5566T95	00000	5566T635	00000	5566T125	0000




		600V AC/600V DC—30 amp per Circuit

		2	14 to 12					Screw Terminal	No. 8	9/16"	2 1/8"	1 5/16"	11/16"	257	Black	—	0.22"	4	5566T31	0000	7527K351	0000	5566T311	0000


		3	14 to 12					Screw Terminal	No. 8	9/16"	2 11/16"	1 5/16"	11/16"	257	Black	—	0.22"	4	5566T32	0000	7527K352	0000	5566T312	0000
		4	14 to 12					Screw Terminal	No. 8	9/16"	3 1/4"	1 5/16"	11/16"	257	Black	—	0.22"	4	5566T33	0000	7527K353	0000	5566T313	0000
		5	14 to 12					Screw Terminal	No. 8	9/16"	3 13/16"	1 5/16"	11/16"	257	Black	—	0.22"	4	5566T34	00000	7527K354	0000	5566T314	0000
		6	14 to 12					Screw Terminal	No. 8	9/16"	4 3/8"	1 5/16"	11/16"	257	Black	—	0.22"	4	5566T35	00000	7527K355	0000	5566T315	0000
		7	14 to 12					Screw Terminal	No. 8	9/16"	4 15/16"	1 5/16"	11/16"	257	Black	—	0.22"	4	5566T36	00000	7527K356	0000	5566T316	0000
		8	14 to 12					Screw Terminal	No. 8	9/16"	5 1/2"	1 5/16"	11/16"	257	Black	—	0.22"	4	5566T37	00000	7527K357	0000	5566T317	0000
		9	14 to 12					Screw Terminal	No. 8	9/16"	6 1/16"	1 5/16"	11/16"	257	Black	—	0.22"	4	5566T38	00000	7527K358	0000	5566T318	0000
		10	14 to 12					Screw Terminal	No. 8	9/16"	6 5/8"	1 5/16"	11/16"	257	Black	—	0.22"	4	5566T39	00000	7527K359	0000	5566T319	0000
		12	14 to 12					Screw Terminal	No. 8	9/16"	7 3/4"	1 5/16"	11/16"	257	Black	—	0.22"	4	5566T41	00000	7527K361	0000	5566T321	0000
		14	14 to 12					Screw Terminal	No. 8	9/16"	8 7/8"	1 5/16"	11/16"	257	Black	—	0.22"	4	5566T42	00000	7527K362	0000	5566T322	0000


		16	14 to 12	Screw Terminal	No. 8			9/16"	10"	1 5/16"	11/16"	257	Black	—	0.22"	4	5566T43	00000	7527K363	0000	5566T323	0000
		18	14 to 12	Screw Terminal	No. 8			9/16"	11 1/8"	1 5/16"	11/16"	257	Black	—	0.22"	4	5566T44	00000	7527K364	0000	5566T324	0000
		20	14 to 12	Screw Terminal	No. 8			9/16"	12 1/4"	1 5/16"	11/16"	257	Black	—	0.22"	4	5566T45	00000	7527K365	0000	5566T325	0000




				600V AC/600V DC—75 amp per Circuit

				2	14 to 6			Screw Terminal	No. 10	11/16"	2 1/2"	1 13/16"	3/4"	266	Black	—	0.22"	4	5566T522	0000	———	0	———	0


				3	14 to 6			Screw Terminal	No. 10	11/16"	3 3/16"	1 13/16"	3/4"	266	Black	—	0.22"	4	5566T523	00000	———	0	———	0
				4	14 to 6			Screw Terminal	No. 10	11/16"	3 7/8"	1 13/16"	3/4"	266	Black	—	0.22"	4	5566T524	00000	———	0	———	0
				5	14 to 6			Screw Terminal	No. 10	11/16"	4 9/16"	1 13/16"	3/4"	266	Black	—	0.22"	4	5566T525	00000	———	0	———	0
				6	14 to 6			Screw Terminal	No. 10	11/16"	5 1/4"	1 13/16"	3/4"	266	Black	—	0.22"	4	5566T526	00000	———	0	———	0
				7	14 to 6			Screw Terminal	No. 10	11/16"	5 15/16"	1 13/16"	3/4"	266	Black	—	0.22"	4	5566T527	00000	———	0	———	0
				8	14 to 6			Screw Terminal	No. 10	11/16"	6 11/16"	1 13/16"	3/4"	266	Black	—	0.22"	4	5566T528	00000	———	0	———	0
				9	14 to 6			Screw Terminal	No. 10	11/16"	7 5/16"	1 13/16"	3/4"	266	Black	—	0.22"	4	5566T529	00000	———	0	———	0
				10	14 to 6			Screw Terminal	No. 10	11/16"	8"	1 13/16"	3/4"	266	Black	—	0.22"	4	5566T531	00000	———	0	———	0
				12	14 to 6			Screw Terminal	No. 10	11/16"	9 3/8"	1 13/16"	3/4"	266	Black	—	0.22"	4	5566T532	00000	———	0	———	0




						600V AC/600V DC—200 amp per Circuit

						2	14 to 2	Stud Terminal	1/4"	13/16"	1 7/8"	3"	2 7/16"	257	Black	3	0.22"	4	5566T77	00000	———	0	———	0


						3	14 to 2	Stud Terminal	1/4"	13/16"	2 9/16"	3"	2 7/16"	257	Black	3	0.22"	6	5566T78	00000	———	0	———	0

Accessories for Terminal Blocks

Jumpers

Over-Barrier Jumper—Fit these jumpers over terminal block dividers to leave free space on the side. They connect adjacent terminals so you can connect multiple components with a single wire.

Around-Barrier Jumper—These jumpers bend around the divider for a lower profile than over-barrier jumpers. They connect adjacent terminals so you can connect multiple components with a single wire.

	For Terminal Block Voltage	Pkg. Qty.		Pkg.
Over-Barrier Jumper
Over Barrier Jumper






			For 3/8" Terminal Center-to-Center

			2	300V AC/300V DC	25	7527K59	000000




					For 7/16" Terminal Center-to-Center

					2	300V AC/300V DC	25	7527K79	00000


					2	600V AC/600V DC	1	5566T26	0000




							For 9/16" Terminal Center-to-Center

							2	600V AC/600V DC	1	5566T46	0000




									For 11/16" Terminal Center-to-Center

									2	600V AC/600V DC	1	5566T67	0000


									Around-Barrier Jumper
									Around Barrier Jumper






													For 3/8" Terminal Center-to-Center

													2	300V AC/300V DC	1	7527K981	0000


													3	300V AC/300V DC	1	7527K982	0000
													4	300V AC/300V DC	1	7527K983	0000
													5	300V AC/300V DC	1	7527K984	0000
													6	300V AC/300V DC	1	7527K985	0000
													7	300V AC/300V DC	1	7527K986	0000
													8	300V AC/300V DC	1	7527K987	0000
													9	300V AC/300V DC	1	7527K988	0000
													10	300V AC/300V DC	1	7527K989	0000
													12	300V AC/300V DC	1	7527K992	0000
													14	300V AC/300V DC	1	7527K993	0000


													16	300V AC/300V DC	1	7527K994	0000
													18	300V AC/300V DC	1	7527K995	0000
													20	300V AC/300V DC	1	7527K996	0000




													For 7/16" Terminal Center-to-Center

	2	300V AC/300V DC/600V AC/600V DC											1	5566T771	0000


	3	300V AC/300V DC/600V AC/600V DC											1	5566T772	0000
	4	300V AC/300V DC/600V AC/600V DC											1	5566T773	0000
	5	300V AC/300V DC/600V AC/600V DC											1	5566T774	0000
	6	300V AC/300V DC/600V AC/600V DC	1										5566T775	0000
	7	300V AC/300V DC/600V AC/600V DC	1	5566T776									0000
	8	300V AC/300V DC/600V AC/600V DC	1	5566T777									0000
	9	300V AC/300V DC/600V AC/600V DC	1	5566T778									0000
	10	300V AC/300V DC/600V AC/600V DC	1	5566T779									00000
	12	300V AC/300V DC/600V AC/600V DC	1	5566T781									00000
	14	300V AC/300V DC/600V AC/600V DC	1	5566T782									00000


	16	300V AC/300V DC/600V AC/600V DC	1	5566T783									00000
	18	300V AC/300V DC/600V AC/600V DC	1	5566T784	00000
	20	300V AC/300V DC/600V AC/600V DC	1	5566T785	00000

Quick-Disconnect Adapters

Straight

90° Angle

45° Angle

Convert screw terminal connections into quick-disconnect terminal connections.

	For Terminal Block Voltage	Tab Wd.	Pkg. Qty.		Pkg.
For 3/8" Terminal Center-to-Center



	Straight	300V AC/300V DC	0.187"	25	7527K11	000000


	90° Angle	300V AC/300V DC	0.187"	25	7527K58	00000
	45° Angle	300V AC/300V DC	0.187"	25	7527K57	00000


	For 7/16" Terminal Center-to-Center



			Straight	300V AC/300V DC/600V AC/600V DC	0.250"	25	7527K12	00000


			90° Angle	300V AC/300V DC/600V AC/600V DC	0.250"	25	7527K78	00000
			45° Angle	300V AC/300V DC/600V AC/600V DC	0.250"	25	7527K77	00000


			For 9/16" Terminal Center-to-Center



					Straight	300V AC/300V DC/600V AC/600V DC	0.250"	25	7527K13	00000


					90° Angle	300V AC/300V DC/600V AC/600V DC	0.250"	25	7527K38	00000
					45° Angle	300V AC/300V DC/600V AC/600V DC	0.250"	25	7527K37	00000

Quick-Connect Modular DIN-Rail Mount Terminal Blocks

Pop wire in and out of these terminal blocks without adjusting a screw. Lift the clamp with a screwdriver or built-in lever, then release the clamp down onto the wire. Once clamped in place, the wire will stay put when vibrated, bent, or pulled.

Terminal Blocks with Spring-Clamp Terminals

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Alternate Jumpers—Connect terminals on two blocks of the same width, skipping a block in between. This reduces wire clutter and gives you flexibility to adjust your set-up in the future.

	Terminal Blocks										Covers		End Stops		Adjacent Jumpers			Alternate Jumpers
									Each
	No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	For DIN Rail Trade Size	Choose a Color		1-24	25-Up		Each		Each	Insulation		Each	Insulation		Each







				300V AC/300V DC—15 amp per Circuit

				2	2	28 to 12	5	64	3	Blue, Gray	9473T151	00000	00000	9473T154	00000	9473T144	00000	Insulated	9473T112	00000	Insulated	9473T113	00000


				3	2	28 to 12	5	103	3	Blue, Gray	9473T162	00000	00000	9473T165	0000	9473T144	0000	Insulated	9473T112	0000	Insulated	9473T113	0000




						600V AC/600V DC—15 amp per Circuit

						1	2	22 to 14	4.2	48.5	3	Black, Blue, Gray, Orange, Red, Yellow	9473T173	0000	0000	9473T191	0000	9473T144	0000	Insulated	9473T193	0000	Insulated	9473T194	0000


						1	3	22 to 14	4.2	59.5	3	Black, Blue, Gray, Orange, Red, Yellow	9473T177	0000	0000	9473T192	0000	9473T144	0000	Insulated	9473T193	0000	Insulated	9473T194	0000
						1	4	22 to 14	4.2	70	3	Black, Blue, Gray, Orange, Red, Yellow	9473T182	0000	0000	9473T195	0000	9473T144	0000	Insulated	9473T193	0000	Insulated	9473T194	0000




								600V AC/600V DC—20 amp per Circuit

								1	2	28 to 12	5	53	3	Black, Blue, Gray, Orange, Red, Yellow	9473T1	0000	0000	9473T131	0000	9473T144	0000	Insulated	9473T112	0000	Insulated	9473T113	0000


								1	2	28 to 12	6	59	3	Black, Blue, Gray, Orange, Red, Yellow	9473T24	0000	0000	9473T134	0000	9473T144	0000	Insulated	9473T115	0000	Insulated	9473T116	0000
								1	3	28 to 12	5	64	3	Black, Blue, Gray, Orange, Red, Yellow	9473T8	0000	0000	9473T132	0000	9473T144	0000	Insulated	9473T112	0000	Insulated	9473T113	0000
								1	3	28 to 12	6	73.5	3	Black, Blue, Gray, Orange, Red, Yellow	9473T32	0000	0000	9473T135	0000	9473T144	0000	Insulated	9473T115	0000	Insulated	9473T116	0000
								1	4	28 to 12	5	75	3	Black, Blue, Gray, Orange, Red, Yellow	9473T16	0000	0000	9473T133	0000	9473T144	0000	Insulated	9473T112	0000	Insulated	9473T113	0000
								1	4	28 to 12	6	86	3	Black, Blue, Gray, Orange, Red, Yellow	9473T39	0000	0000	9473T136	0000	9473T144	0000	Insulated	9473T115	0000	Insulated	9473T116	0000
								2	2	28 to 12	6	73.5	3	Blue, Gray	9473T157	00000	0000	9473T161	0000	9473T144	0000	Insulated	9473T115	0000	Insulated	9473T116	0000




										600V AC/600V DC—30 amp per Circuit

										1	2	24 to 10	8	74.5	3	Blue, Gray, Orange	9473T47	0000	0000	9473T137	0000	9473T144	0000	Insulated	9473T118	0000	Insulated	9473T119	0000


										1	3	24 to 10	8	93	3	Blue, Gray, Orange	9473T52	0000	0000	9473T138	0000	9473T144	0000	Insulated	9473T118	0000	Insulated	9473T119	0000




												600V AC/600V DC—50 amp per Circuit

												1	2	24 to 8	10	78	3	Blue, Gray, Orange	9473T56	0000	0000	9473T139	0000	9473T144	0000	Insulated	9473T122	0000	Insulated	9473T123	0000


												1	3	24 to 8	10	97.5	3	Blue, Gray, Orange	9473T61	00000	00000	9473T141	0000	9473T144	0000	Insulated	9473T122	0000	Insulated	9473T123	0000




														600V AC/600V DC—65 amp per Circuit

1	2													24 to 6	12	94.5	3	Blue, Gray, Orange	9473T65	00000	0000	9473T142	0000	9473T144	0000	Insulated	9473T125	0000	Insulated	9473T126	0000


1	3													24 to 6	12	104.5	3	Blue, Gray, Orange	9473T69	00000	00000	9473T143	0000	9473T144	0000	—	———	0	Insulated	9473T126	0000




		600V AC/600V DC—115 amp per Circuit

		1	2											8 to 2	16	100	3	Blue, Gray	9473T74	00000	00000	———	0	9473T144	0000	Insulated	9473T128	0000	—	———	0




				600V AC/600V DC—200 amp per Circuit

				1	2									4 to 4/0	25	107	3	Blue, Gray	9473T77	00000	00000	———	0	9473T144	0000	Insulated	9473T129	00000	—	———	0

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For Terminal Block Wd., mm	Number Range	Includes	Markers per Card	Color		1-24	25-Up
Blank



		4.2	—	—	100	White	9473T217	00000	00000


		5, 6, 8, 10, 12, 16, 25	—	—	100	White	9473T145	0000	0000


		Numbered for Horizontal Rails



				4.2	1 to 50	Two of Each Number	100	White	9473T218	00000	0000


				5, 6, 8, 10, 12, 16, 25	1 to 50	Two of Each Number	100	White	9473T146	00000	0000


				Numbered for Vertical Rails



						4.2	1 to 50	Two of Each Number	100	White	9473T219	00000	00000


						5, 6, 8, 10, 12, 16, 25	1 to 50	Two of Each Number	100	White	9473T147	00000	00000

Terminal Blocks with Lever- and Spring-Clamp Terminals

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks									Covers		End Stops		Adjacent Jumpers
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size		Each		Each		Each	Insulation		Each







			600V AC/600V DC—5 amp per Circuit

			1	1 (Lever Clamp) 1 (Spring Clamp)	20 to 8	7.5	74.8	Blue	3	4036N25	00000	4036N205	00000	9473T144	00000	Insulated	4036N303	00000


			1	1 (Lever Clamp) 1 (Spring Clamp)	20 to 8	7.5	74.8	Gray	3	4036N24	0000	4036N205	0000	9473T144	0000	Insulated	4036N303	0000
			1	1 (Lever Clamp) 2 (Spring Clamp)	20 to 8	7.5	90.8	Blue	3	4036N28	0000	4036N206	0000	9473T144	0000	Insulated	4036N303	0000
			1	1 (Lever Clamp) 2 (Spring Clamp)	20 to 8	7.5	90.8	Gray	3	4036N27	0000	4036N206	0000	9473T144	0000	Insulated	4036N303	0000




					600V AC/600V DC—20 amp per Circuit

					1	1 (Lever Clamp) 1 (Spring Clamp)	22 to 12	5.2	61.5	Blue	3	4036N12	0000	4036N201	0000	9473T144	0000	Insulated	4036N301	0000


					1	1 (Lever Clamp) 1 (Spring Clamp)	22 to 12	5.2	61.5	Gray	3	4036N11	0000	4036N201	0000	9473T144	0000	Insulated	4036N301	0000
					1	1 (Lever Clamp) 2 (Spring Clamp)	22 to 12	5.2	72.2	Blue	3	4036N15	0000	4036N202	0000	9473T144	0000	Insulated	4036N301	0000
					1	1 (Lever Clamp) 2 (Spring Clamp)	22 to 12	5.2	72.2	Gray	3	4036N14	0000	4036N202	0000	9473T144	0000	Insulated	4036N301	0000




							600V AC/600V DC—30 amp per Circuit

							1	1 (Lever Clamp) 1 (Spring Clamp)	20 to 10	6.2	70	Blue	3	4036N18	0000	4036N203	0000	9473T144	0000	Insulated	4036N302	0000


							1	1 (Lever Clamp) 1 (Spring Clamp)	20 to 10	6.2	70	Gray	3	4036N17	0000	4036N203	0000	9473T144	0000	Insulated	4036N302	0000
							1	1 (Lever Clamp) 2 (Spring Clamp)	20 to 10	6.2	83.2	Blue	3	4036N22	0000	4036N204	0000	9473T144	0000	Insulated	4036N302	0000
							1	1 (Lever Clamp) 2 (Spring Clamp)	20 to 10	6.2	83.2	Gray	3	4036N21	0000	4036N204	0000	9473T144	0000	Insulated	4036N302	0000




									600V AC/600V DC—65 amp per Circuit

									1	1 (Lever Clamp) 1 (Spring Clamp)	20 to 6	10	89	Blue	3	4036N32	0000	4036N207	0000	9473T144	0000	Insulated	4036N304	0000


									1	1 (Lever Clamp) 1 (Spring Clamp)	20 to 6	10	89	Gray	3	4036N31	0000	4036N207	0000	9473T144	0000	Insulated	4036N304	0000
									1	1 (Lever Clamp) 2 (Spring Clamp)	20 to 6	10	110.4	Blue	3	4036N35	00000	4036N208	0000	9473T144	0000	Insulated	4036N304	0000
									1	1 (Lever Clamp) 2 (Spring Clamp)	20 to 6	10	110.4	Gray	3	4036N34	00000	4036N208	0000	9473T144	0000	Insulated	4036N304	0000




											600V AC/600V DC—85 amp per Circuit

											1	1 (Lever Clamp) 1 (Spring Clamp)	20 to 6	12	91.5	Blue	3	4036N38	0000	4036N209	0000	9473T144	0000	Insulated	4036N305	0000


											1	1 (Lever Clamp) 1 (Spring Clamp)	20 to 6	12	91.5	Gray	3	4036N37	0000	4036N209	0000	9473T144	0000	Insulated	4036N305	0000
											1	1 (Lever Clamp) 2 (Spring Clamp)	20 to 6	12	113.5	Blue	3	4036N42	00000	4036N211	0000	9473T144	0000	Insulated	4036N305	0000
											1	1 (Lever Clamp) 2 (Spring Clamp)	20 to 6	12	113.5	Gray	3	4036N41	00000	4036N211	0000	9473T144	0000	Insulated	4036N305	0000

Markers

	For Terminal Block Wd., mm	Markers per Card	Color
Blank


5.2, 6.2, 7.5, 10, 12	100	White	4036N401	00000

Ground Terminal Blocks with Spring-Clamp Terminals

Connect grounding wire to DIN rail so fault currents can safely flow to ground. These terminal blocks should only be used for grounding circuits.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks										Covers		End Stops		Adjacent Jumpers
								Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size		1-24	25-Up		Each		Each	Insulation		Each



	1	2	28 to 12	5	53	Green/Yellow	3	9473T82	000000	000000	9473T131	00000	9473T144	00000	Insulated	9473T114	00000


	1	2	28 to 12	6	59	Green/Yellow	3	9473T86	00000	00000	9473T134	0000	9473T144	0000	Insulated	9473T117	0000
	1	2	24 to 10	8	74.5	Green/Yellow	3	9473T91	00000	00000	9473T137	0000	9473T144	0000	Insulated	9473T121	0000
	Adjacent Jumper for 8mm Wide Grounding Quick and Secure Modular DIN-Rail Terminal Block Product Detail QuantityEachIn stock Select a compatible file type: Parasolid
	1	2	24 to 8	10	78	Green/Yellow	3	9473T94	00000	00000	9473T139	0000	9473T144	0000	Insulated	9473T124	0000
	1	2	24 to 6	12	94.5	Green/Yellow	3	9473T97	00000	00000	9473T142	0000	9473T144	0000	Insulated	9473T127	0000
	1	2	22 to 14	4.2	50.8	Green/Yellow	3	9473T187	0000	0000	9473T191	0000	9473T144	0000	—	———	0
	1	2	8 to 2	16	100	Green/Yellow	3	9473T99	00000	00000	———	0	9473T144	0000	—	———	0
	1	2	4 to 4/0	25	107	Green/Yellow	3	9473T111	00000	00000	———	0	9473T144	0000	—	———	0
	1	3	28 to 12	5	64	Green/Yellow	3	9473T83	00000	00000	9473T132	0000	9473T144	0000	Insulated	9473T114	0000
	1	3	28 to 12	6	73.5	Green/Yellow	3	9473T87	00000	00000	9473T135	0000	9473T144	0000	Insulated	9473T117	0000
	1	3	24 to 10	8	93	Green/Yellow	3	9473T92	00000	00000	9473T138	0000	9473T144	0000	Insulated	9473T121	0000


	1	3	24 to 8	10	97.5	Green/Yellow	3	9473T95	00000	00000	9473T141	0000	9473T144	0000	Insulated	9473T124	0000
	1	3	24 to 6	12	104.5	Green/Yellow	3	9473T98	00000	00000	9473T143	0000	9473T144	0000	Insulated	9473T127	0000
	1	3	22 to 14	4.2	59.5	Green/Yellow	3	9473T188	0000	0000	9473T192	0000	9473T144	0000	—	———	0
	1	4	28 to 12	5	64	Green/Yellow	3	9473T155	00000	00000	9473T154	0000	9473T144	0000	Insulated	9473T114	0000
	1	4	28 to 12	5	75	Green/Yellow	3	9473T84	00000	00000	9473T133	0000	9473T144	0000	Insulated	9473T114	0000
	1	4	28 to 12	6	86	Green/Yellow	3	9473T88	00000	00000	9473T136	0000	9473T144	0000	Insulated	9473T117	0000
	1	4	22 to 14	4.2	70	Green/Yellow	3	9473T189	0000	0000	9473T195	0000	9473T144	0000	—	———	0

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For Terminal Block Wd., mm	Number Range	Includes	Markers per Card	Color		1-24	25-Up
Blank



		4.2	—	—	100	White	9473T217	00000	00000


		5, 6, 8, 10, 12, 16, 25	—	—	100	White	9473T145	0000	0000


		Numbered for Horizontal Rails



				4.2	1 to 50	Two of Each Number	100	White	9473T218	00000	0000


				5, 6, 8, 10, 12, 16, 25	1 to 50	Two of Each Number	100	White	9473T146	00000	0000


				Numbered for Vertical Rails



						4.2	1 to 50	Two of Each Number	100	White	9473T219	00000	00000


						5, 6, 8, 10, 12, 16, 25	1 to 50	Two of Each Number	100	White	9473T147	00000	00000

Ground Terminal Blocks with Lever- and Spring-Clamp Terminals

Connect grounding wire to DIN rail so fault currents can safely flow to ground. These terminal blocks should only be used for grounding circuits.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks									Covers		End Stops		Adjacent Jumpers
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size		Each		Each		Each	Insulation		Each



	1	1 (Lever Clamp) 1 (Spring Clamp)	22 to 12	5.2	63.8	Green/Yellow	3	4036N13	00000	4036N201	00000	9473T144	00000	Insulated	4036N301	00000


	1	1 (Lever Clamp) 1 (Spring Clamp)	20 to 10	6.2	70.7	Green/Yellow	3	4036N19	00000	4036N203	0000	9473T144	0000	Insulated	4036N302	0000
	1	1 (Lever Clamp) 1 (Spring Clamp)	20 to 8	7.5	75.2	Green/Yellow	3	4036N26	00000	4036N205	0000	9473T144	0000	Insulated	4036N303	0000
	1	1 (Lever Clamp) 1 (Spring Clamp)	20 to 6	10	89	Green/Yellow	3	4036N33	00000	4036N207	0000	9473T144	0000	Insulated	4036N304	0000
	1	1 (Lever Clamp) 1 (Spring Clamp)	20 to 6	12	91.5	Green/Yellow	3	4036N39	00000	4036N209	0000	9473T144	0000	Insulated	4036N305	0000
	1	1 (Lever Clamp) 2 (Spring Clamp)	22 to 12	5.2	72.2	Green/Yellow	3	4036N16	00000	4036N202	0000	9473T144	0000	Insulated	4036N301	0000
	1	1 (Lever Clamp) 2 (Spring Clamp)	20 to 10	6.2	83.2	Green/Yellow	3	4036N23	00000	4036N204	0000	9473T144	0000	Insulated	4036N302	0000
	1	1 (Lever Clamp) 2 (Spring Clamp)	20 to 8	7.5	91.2	Green/Yellow	3	4036N29	00000	4036N206	0000	9473T144	0000	Insulated	4036N303	0000
	1	1 (Lever Clamp) 2 (Spring Clamp)	20 to 6	10	110.4	Green/Yellow	3	4036N36	00000	4036N208	0000	9473T144	0000	Insulated	4036N304	0000
	1	1 (Lever Clamp) 2 (Spring Clamp)	20 to 6	12	113.5	Green/Yellow	3	4036N43	00000	4036N211	0000	9473T144	0000	Insulated	4036N305	0000

Markers

	For Terminal Block Wd., mm	Markers per Card	Color
Blank


5.2, 6.2, 7.5, 10, 12	100	White	4036N401	00000

Fuse Terminal Blocks with Spring-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Quick-Connect Modular DIN-Rail Mount Terminal Blocks, Fuse Terminal Blocks with Spring-Clamp Terminals.

Install a fuse in the built-in fuse holder so excess current doesn't damage your equipment. If the current exceeds the limit, the fuse will blow and cut power to connected components.

Blown Fuse Indicator—A light goes on when the fuse blows, so you can spot an overloaded circuit without cutting power or touching equipment.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks															Covers		End Stops		Adjacent Jumpers
					For Fuse								Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Trade Size	Overall Dia.	Overall Lg., mm	Type	Circuit Status Indicator Type	Color	For DIN Rail Trade Size		1-24	25-Up		Each		Each	Insulation		Each







			24V AC/24V DC—30 amp per Circuit

			1	2	24 to 10	8	85	—	—	—	Automotive	Blown Fuse	Gray	3	9553T12	000000	000000	9553T9	00000	9473T144	00000	Insulated	9473T118	00000




					110V AC/110V DC—10 amp per Circuit

					1	2	28 to 12	8	60	—	5 mm	20	Ceramic, Glass	Blown Fuse	Gray	3	9553T11	00000	00000	9553T2	0000	9473T144	0000	Insulated	9473T115	0000


					1	2	28 to 12	10	60	3AG	1/4"	—	Glass	Blown Fuse	Gray	3	9553T13	00000	00000	9553T2	0000	9473T144	0000	Insulated	9473T115	0000




							600V AC/600V DC—10 amp per Circuit

							1	2	28 to 12	8	60	—	5 mm	20	Ceramic, Glass	—	Gray	3	9553T1	00000	00000	9553T2	0000	9473T144	0000	Insulated	9473T115	0000


							1	2	28 to 12	10	60	3AG	1/4"	—	Glass	—	Gray	3	9553T3	00000	00000	9553T2	0000	9473T144	0000	Insulated	9473T115	0000




									600V AC/600V DC—30 amp per Circuit

									1	2	24 to 10	8	85	—	—	—	Automotive	—	Gray	3	9553T8	00000	00000	9553T9	0000	9473T144	0000	Insulated	9473T118	0000

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For Terminal Block Wd., mm	Number Range	Includes	Markers per Card	Color		1-24	25-Up
Blank



		5, 6, 8, 10, 12, 16, 25	—	—	100	White	9473T145	00000	00000


		Numbered for Horizontal Rails



				5, 6, 8, 10, 12, 16, 25	1 to 50	Two of Each Number	100	White	9473T146	00000	0000


				Numbered for Vertical Rails



						5, 6, 8, 10, 12, 16, 25	1 to 50	Two of Each Number	100	White	9473T147	00000	00000

Disconnect Terminal Blocks with Spring-Clamp Terminals

Test and troubleshoot circuits without removing any wire. Flip the tab by hand or with a screwdriver to open and close the circuit.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Alternate Jumpers—Connect terminals on two blocks of the same width, skipping a block in between. This reduces wire clutter and gives you flexibility to adjust your set-up in the future.

Terminal Blocks										Covers		End Stops		Adjacent Jumpers			Alternate Jumpers
								Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size		1-24	25-Up		Each		Each	Insulation		Each	Insulation		Each







			600V AC/600V DC—15 amp per Circuit

			1	2	28 to 12	5	69.5	Gray	3	9473T168	000000	000000	9473T167	00000	9473T144	00000	Insulated	9473T112	00000	Insulated	9473T113	00000




					600V AC/600V DC—30 amp per Circuit

					1	2	24 to 10	8	85	Gray	3	9473T171	00000	00000	9473T172	0000	9473T144	0000	Insulated	9473T118	0000	Insulated	9473T119	0000

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For Terminal Block Wd., mm	Number Range	Includes	Markers per Card	Color		1-24	25-Up
Blank



		5, 6, 8, 10, 12, 16, 25	—	—	100	White	9473T145	00000	00000


		Numbered for Horizontal Rails



				5, 6, 8, 10, 12, 16, 25	1 to 50	Two of Each Number	100	White	9473T146	00000	0000


				Numbered for Vertical Rails



						5, 6, 8, 10, 12, 16, 25	1 to 50	Two of Each Number	100	White	9473T147	00000	00000

Sensor Terminal Blocks with Spring-Clamp Terminals

These blocks connect sensors and actuators with NPN and PNP outputs. An LED indicates whether the circuits are powered, making it easier to troubleshoot your system. Mix and match blocks to consolidate wiring for multiple sensors, such as light and photoelectric sensors on a conveyor line. Other terminals on the blocks connect PLCs, data loggers, and other components.

For NPN Signal Output—These blocks light up when a connected NPN sensor sends a negative signal. They're common in Asian automation systems.

For PNP Signal Output—These blocks light up when a connected PNP sensor sends a positive signal. They're common in North American and European automation systems.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

	Terminal Blocks										Covers		End Stops		Adjacent Jumpers
	No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Circuit Status Indicator Type	Color	For DIN Rail Trade Size		Each		Each		Each	Insulation		Each
For NPN Signal Output







				24V AC/24V DC—10 amp per Circuit

				4	2	24 to 16	7	81.1	Power	Gray	3	4280N12	000000	4280N201	00000	9473T144	00000	Insulated	4280N401	00000


				For PNP Signal Output







								24V AC/24V DC—10 amp per Circuit

								4	2	24 to 16	7	81.1	Power	Gray	3	4280N11	00000	4280N201	0000	9473T144	0000	Insulated	4280N401	0000

Accessories for Terminal Blocks

Touch-Safe Terminal Blocks


Style A	Style B	Style C

These terminal blocks protect you from shocks and prevent short circuits. The terminals are recessed in the block, so you can't accidentally touch them when installing or adjusting your wire.

Screw-Clamp-Terminal Wire Connection—The clamp flattens the wire to resist pullout and vibration better than screw terminals. For an even stronger and more conductive connection, crimp a terminal or wire ferrule onto the end of the wire.

For DIN 3 Rails—Unlike other surface-mount terminal blocks, these have a notch that snaps onto DIN 3 rail. You can also screw them directly onto your control panel or other surface.

Markers—Label your terminal block connections so you can identify them at a glance. These markers extend from underneath the terminal block.

Terminal Blocks																	Markers
												Mounting Holes
Style	No. of Circuits	For Wire Ga.	Wire Connection	Terminal Size	Terminal Ctr.-to-Ctr.	Lg.	Wd.	Ht.	Max. Temp., ° F	Color	For DIN Rail Trade Size	Dia.	No. of	Enclosure Rating		Each	Pkg. Qty.		Pkg.







			600V AC/600V DC—20 amp per Circuit

			A	2	22 to 12	Screw-Clamp Terminal	M3	5/16"	1/2"	3/4"	3/4"	221	White	—	0.12"	1	—	7618K611	00000	—	———	0


			A	3	22 to 12	Screw-Clamp Terminal	M3	5/16"	7/8"	3/4"	3/4"	221	White	—	0.12"	2	—	7618K612	0000	—	———	0
			A	4	22 to 12	Screw-Clamp Terminal	M3	5/16"	1 3/16"	3/4"	3/4"	221	White	—	0.12"	3	—	7618K613	0000	—	———	0
			A	6	22 to 12	Screw-Clamp Terminal	M3	5/16"	1 13/16"	3/4"	3/4"	221	White	—	0.12"	5	—	7618K614	0000	—	———	0
			A	8	22 to 12	Screw-Clamp Terminal	M3	5/16"	2 7/16"	3/4"	3/4"	221	White	—	0.12"	7	—	7618K615	0000	—	———	0
			A	9	22 to 12	Screw-Clamp Terminal	M3	5/16"	2 3/4"	3/4"	3/4"	221	White	—	0.12"	8	—	7618K616	0000	—	———	0
			A	10	22 to 12	Screw-Clamp Terminal	M3	5/16"	3 1/16"	3/4"	3/4"	221	White	—	0.12"	9	—	7618K617	0000	—	———	0
			A	12	22 to 12	Screw-Clamp Terminal	M3	5/16"	3 11/16"	3/4"	3/4"	221	White	—	0.12"	11	—	7618K618	0000	—	———	0




					600V AC—30 amp per Circuit

					B	4	18 to 10	Screw-Clamp Terminal	No. 8	9/16"	2 3/8"	1 3/16"	1 3/4"	220	Black	3	0.18"	2	IP20	8839T11	0000	10	8839T111	00000


					B	6	18 to 10	Screw-Clamp Terminal	No. 8	9/16"	3 1/2"	1 3/16"	1 3/4"	220	Black	3	0.18"	2	IP20	8839T12	00000	10	8839T124	0000
					B	12	18 to 10	Screw-Clamp Terminal	No. 8	9/16"	6 7/8"	1 3/16"	1 3/4"	220	Black	3	0.18"	2	IP20	8839T14	00000	10	8839T124	0000




							600V AC/600V DC—30 amp per Circuit

							A	2	18 to 10	Screw-Clamp Terminal	M3	3/8"	11/16"	3/4"	13/16"	221	White	—	0.15"	1	—	7618K631	0000	—	———	0


							A	3	18 to 10	Screw-Clamp Terminal	M3	3/8"	1 1/16"	3/4"	13/16"	221	White	—	0.15"	2	—	7618K632	0000	—	———	0
							A	4	18 to 10	Screw-Clamp Terminal	M3	3/8"	1 7/16"	3/4"	13/16"	221	White	—	0.15"	3	—	7618K633	0000	—	———	0
							A	6	18 to 10	Screw-Clamp Terminal	M3	3/8"	2 1/4"	3/4"	13/16"	221	White	—	0.15"	5	—	7618K634	0000	—	———	0
							A	8	18 to 10	Screw-Clamp Terminal	M3	3/8"	3"	3/4"	13/16"	221	White	—	0.15"	7	—	7618K635	0000	—	———	0
							A	9	18 to 10	Screw-Clamp Terminal	M3	3/8"	3 7/16"	3/4"	13/16"	221	White	—	0.15"	8	—	7618K636	0000	—	———	0
							A	10	18 to 10	Screw-Clamp Terminal	M3	3/8"	3 13/16"	3/4"	13/16"	221	White	—	0.15"	9	—	7618K637	0000	—	———	0
							A	12	18 to 10	Screw-Clamp Terminal	M3	3/8"	4 5/8"	3/4"	13/16"	221	White	—	0.15"	11	—	7618K638	0000	—	———	0




									600V AC/600V DC—40 amp per Circuit

									A	2	20 to 8	Screw-Clamp Terminal	M3	1/2"	13/16"	15/16"	7/8"	221	White	—	0.17"	1	—	7618K651	0000	—	———	0


									A	3	20 to 8	Screw-Clamp Terminal	M3	1/2"	1 1/4"	15/16"	7/8"	221	White	—	0.17"	2	—	7618K652	0000	—	———	0
									A	4	20 to 8	Screw-Clamp Terminal	M3	1/2"	1 3/4"	15/16"	7/8"	221	White	—	0.17"	3	—	7618K653	0000	—	———	0
									A	6	20 to 8	Screw-Clamp Terminal	M3	1/2"	2 11/16"	15/16"	7/8"	221	White	—	0.17"	5	—	7618K654	0000	—	———	0
									A	8	20 to 8	Screw-Clamp Terminal	M3	1/2"	3 5/8"	15/16"	7/8"	221	White	—	0.17"	7	—	7618K655	0000	—	———	0
									A	9	20 to 10	Screw-Clamp Terminal	M3	1/2"	4 1/16"	15/16"	7/8"	257	White	—	0.17"	8	—	7618K659	0000	—	———	0
									A	10	20 to 8	Screw-Clamp Terminal	M3	1/2"	4 9/16"	15/16"	7/8"	221	White	—	0.17"	9	—	7618K657	0000	—	———	0
									A	12	20 to 8	Screw-Clamp Terminal	M3	1/2"	5 1/2"	15/16"	7/8"	221	White	—	0.17"	11	—	7618K658	0000	—	———	0




									600V AC/600V DC—63 amp per Circuit

									A	2	14 to 6	Screw-Clamp Terminal	M3	9/16"	1"	1 1/8"	1 1/16"	221	White	—	0.17"	1	—	7618K671	0000	—	———	0


	A	3							14 to 6	Screw-Clamp Terminal	M3	9/16"	1 9/16"	1 1/8"	1 1/16"	221	White	—	0.17"	2	—	7618K672	0000	—	———	0
	A	4							14 to 6	Screw-Clamp Terminal	M3	9/16"	2 3/16"	1 1/8"	1 1/16"	221	White	—	0.17"	3	—	7618K673	0000	—	———	0
	A	6							14 to 6	Screw-Clamp Terminal	M3	9/16"	3 3/8"	1 1/8"	1 1/16"	221	White	—	0.17"	5	—	7618K674	0000	—	———	0
	A	8							14 to 6	Screw-Clamp Terminal	M3	9/16"	4 1/2"	1 1/8"	1 1/16"	221	White	—	0.17"	7	—	7618K675	0000	—	———	0
	A	9							14 to 6	Screw-Clamp Terminal	M3	9/16"	5 1/8"	1 1/8"	1 1/16"	221	White	—	0.17"	8	—	7618K676	0000	—	———	0
	A	10							14 to 6	Screw-Clamp Terminal	M3	9/16"	5 11/16"	1 1/8"	1 1/16"	221	White	—	0.17"	9	—	7618K677	00000	—	———	0
	A	12							14 to 6	Screw-Clamp Terminal	M3	9/16"	6 7/8"	1 1/8"	1 1/16"	221	White	—	0.17"	11	—	7618K678	00000	—	———	0




									600V AC/600V DC—85 amp per Circuit

									C	2	18 to 4	Screw Terminal	1/4"	5/8"	1 3/16"	1 1/4"	1 1/8"	302	Black	—	0.18"	1	—	9130K41	0000	—	———	0


			C	3					18 to 4	Screw Terminal	1/4"	5/8"	1 3/4"	1 1/4"	1 1/8"	302	Black	—	0.18"	2	—	9130K42	00000	—	———	0
			C	4					18 to 4	Screw Terminal	1/4"	5/8"	2 7/16"	1 1/4"	1 1/8"	302	Black	—	0.18"	3	—	9130K43	00000	—	———	0
			C	5					18 to 4	Screw Terminal	1/4"	5/8"	3"	1 1/4"	1 1/8"	302	Black	—	0.18"	4	—	9130K44	00000	—	———	0
			C	6					18 to 4	Screw Terminal	1/4"	5/8"	3 11/16"	1 1/4"	1 1/8"	302	Black	—	0.18"	5	—	9130K45	00000	—	———	0
			C	8					18 to 4	Screw Terminal	1/4"	5/8"	4 15/16"	1 1/4"	1 1/8"	302	Black	—	0.18"	7	—	9130K46	00000	—	———	0
			C	10					18 to 4	Screw Terminal	1/4"	5/8"	6 3/16"	1 1/4"	1 1/8"	302	Black	—	0.18"	9	—	9130K47	00000	—	———	0
			C	12					18 to 4	Screw Terminal	1/4"	5/8"	7 7/16"	1 1/4"	1 1/8"	302	Black	—	0.18"	11	—	9130K48	00000	—	———	0

High-Temperature Terminal Blocks

These ceramic terminal blocks keep their shape and strength at temperatures up to 1,200° F—over four times higher than standard blocks. Mount them to surfaces in ovens, kilns, and other heat-generating equipment.

											Mounting Holes
No. of Circuits	For Wire Ga.	Wire Connection	Terminal Size	Terminal Ctr.-to-Ctr.	Lg.	Wd.	Ht.	Max. Temp., ° F	Material	Color	Dia.	No. of		Each







			300V AC/300V DC—20 amp per Circuit

			1	24 to 12	Screw Terminal	M3	—	7/16"	15/16"	3/4"	1,200	Ceramic	White	—	—	5602T25	00000


			2	24 to 12	Screw Terminal	M3	5/16"	11/16"	15/16"	3/4"	1,200	Ceramic	White	—	—	5602T31	0000
			2	24 to 12	Screw Terminal	M3	1/2"	15/16"	15/16"	3/4"	1,200	Ceramic	White	0.14"	2	5602T32	0000
			3	24 to 12	Screw Terminal	M3	5/16"	1"	15/16"	3/4"	1,200	Ceramic	White	—	—	5602T33	0000
			3	24 to 12	Screw Terminal	M3	1/2"	1 7/16"	15/16"	3/4"	1,200	Ceramic	White	0.14"	2	5602T34	0000




					300V AC/300V DC—30 amp per Circuit

					1	22 to 10	Screw Terminal	M3	—	1/2"	1"	3/4"	1,200	Ceramic	White	—	—	5602T35	0000


					2	22 to 10	Screw Terminal	M3	9/16"	1"	1"	3/4"	1,200	Ceramic	White	0.14"	2	5602T21	0000
					3	22 to 10	Screw Terminal	M3	9/16"	1 5/8"	1"	3/4"	1,200	Ceramic	White	0.14"	2	5602T23	0000
					4	22 to 10	Screw Terminal	M3	5/16"	1 9/16"	13/16"	5/8"	1,200	Ceramic	White	0.14"	1	5602T26	0000




							300V AC/300V DC—65 amp per Circuit

							2	18 to 6	Screw Terminal	M3	11/16"	1 1/4"	1 1/8"	15/16"	1,200	Ceramic	White	0.14"	2	5602T22	0000


							3	18 to 6	Screw Terminal	M3	11/16"	1 7/8"	1 1/16"	15/16"	1,200	Ceramic	White	0.14"	2	5602T24	0000




									600V AC/600V DC—20 amp per Circuit

									2	20 to 12	Screw-Clamp Terminal	No. 8	7/8"	1 9/16"	1 1/4"	13/16"	840	Ceramic	Beige	0.19"	1	1322T11	00000


									3	20 to 12	Screw-Clamp Terminal	No. 8	7/8"	2 7/16"	1 1/4"	13/16"	840	Ceramic	Beige	0.19"	2	1322T12	00000

Quick-Connect Terminal Blocks

Snap wire into place with a clamp instead of fussing with a screw. Release the spring clamp with a screwdriver, insert the wire, and push the clamp back down for a secure hold. For an easier fit in the small gaps in the block, attach a ferrule, pin terminal, or blade terminal before installing.

DIN Rail Mounting Adapters—Install terminal blocks on DIN 3 rail with these mounting brackets. You can mount two-circuit terminal blocks with one adapter. For all other blocks, you'll need two.

Terminal Blocks																DIN Rail Mounting Adapters
										Mounting Holes		Black		White
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wire Connection	Terminal Ctr.-to-Ctr.	Lg.	Wd.	Ht.	Max. Temp., ° F	For DIN Rail Trade Size	Dia.	No. of		Each		Each		Each
2	4	20 to 12	Spring-Clamp Terminal	1/2"	15/16"	7/8"	1 3/8"	221	3	0.13"	1	8841T11	00000	8841T12	00000	8841T7	00000
3	4	20 to 12	Spring-Clamp Terminal	1/2"	1 7/16"	7/8"	1 3/8"	221	3	0.13"	2	8841T21	0000	8841T22	0000	8841T7	0000
4	4	20 to 12	Spring-Clamp Terminal	1/2"	1 7/8"	7/8"	1 3/8"	221	3	0.13"	3	8841T31	0000	8841T32	0000	8841T7	0000
5	4	20 to 12	Spring-Clamp Terminal	1/2"	2 3/8"	7/8"	1 3/8"	221	3	0.13"	4	8841T41	0000	8841T42	0000	8841T7	0000

Space-Saving Modular DIN-Rail Mount Terminal Blocks

These handle the same voltage and power as our other modular blocks while taking up about half the vertical space. Snap them onto DIN 2 rail (also known as mini rail), which is lower in height than DIN 3 rail.

The screw-clamp or spring-clamp terminals flatten your wire so it stays put when vibrated or pulled. For an even stronger and more conductive connection, crimp a terminal or wire ferrule onto the end of the wire.

Mix and match blocks to get the exact number of circuits you need in a single setup. Add terminal blocks for fuses and grounding wire as needed. The blocks clip side by side onto DIN rail in control panels, creating tidy rows of circuits that you can identify and access on the spot.

Terminal Blocks with Screw-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Space-Saving Modular DIN-Rail Mount Terminal Blocks, Terminal Blocks with Screw-Clamp Terminals.

A screw presses the clamp onto the wire for a secure hold.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Noninsulated—Terminal blocks with noninsulated jumpers lose their IP20 rating for touch protection because the jumpers introduce exposed metal to the circuit.

Terminal Blocks											Covers		End Stops		Bar Jumpers
									Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	For DIN Rail Trade Size	Enclosure Rating	Choose a Color		1-24	25-Up		Each		Each	Insulation		Each







			250V AC—20 amp per Circuit

			1	2	28 to 12	5	27.5	2	IP20	Gray	7641K61	00000	00000	7641K66	00000	7641K69	00000	Noninsulated	7641K56	000000




					500V AC—17.5 amp per Circuit

					1	2	24 to 16	4	28	2	IP20	Gray	7641K951	0000	0000	7641K953	0000	7641K69	0000	Noninsulated	7641K954	00000




							500V AC—30 amp per Circuit

							1	2	22 to 12	6	28	2	IP20	Blue, Gray	7641K62	0000	0000	7641K671	0000	7641K69	0000	Noninsulated	7641K57	00000

Markers

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1	4	—	100	White	7641K955	00000	00000


		1	5	—	100	White	7641K811	0000	0000
		1	6	—	100	White	7641K812	0000	0000


		Numbered for Horizontal Rails



				1	4	1 to 100	100	White	7641K956	0000	0000


				1	5	1 to 100	100	White	7641K824	0000	0000
				1	5	101 to 200	100	White	7641K825	0000	0000
				1	6	1 to 100	100	White	7641K834	0000	0000
				1	6	101 to 200	100	White	7641K835	0000	0000


				Numbered for Vertical Rails



						1	4	1 to 100	100	White	7641K957	0000	0000


						1	4	101 to 200	100	White	7641K958	0000	0000
						1	5	1 to 100	100	White	7641K822	0000	0000
						1	5	101 to 200	100	White	7641K823	0000	0000
						1	6	1 to 100	100	White	7641K832	0000	0000
						1	6	101 to 200	100	White	7641K833	0000	0000

Terminal Blocks with Spring-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Space-Saving Modular DIN-Rail Mount Terminal Blocks, Terminal Blocks with Spring-Clamp Terminals.

Instead of fussing with screws, flip the lever to clamp your wire into the terminal.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks											Covers		End Stops		Bar Jumpers
									Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size	Enclosure Rating		1-24	25-Up		Each		Each	Insulation		Each







			600V AC/600V DC—24 amp per Circuit

			1	2	26 to 12	5	33	Gray	2	IP20	7641K851	00000	00000	7641K86	00000	7641K69	00000	Insulated	7641K94	000000


			1	4	26 to 12	10	33	Gray	2	IP20	7641K959	0000	0000	7641K86	0000	7641K69	0000	Insulated	7641K94	00000

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1	5	—	100	White	7641K811	00000	00000


		1, 2	8, 10, 12, 13, 16, 22	—	100	White	7641K981	0000	0000


		Numbered for Horizontal Rails



				1	5	1 to 100	100	White	7641K824	0000	0000


				1	5	101 to 200	100	White	7641K825	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	7641K991	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	7641K992	0000	0000


				Numbered for Vertical Rails



						1	5	1 to 100	100	White	7641K822	0000	0000


						1	5	101 to 200	100	White	7641K823	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	7641K993	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	7641K994	0000	0000

Ground Terminal Blocks with Screw-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Space-Saving Modular DIN-Rail Mount Terminal Blocks, Ground Terminal Blocks with Screw-Clamp Terminals.

Connect grounding wire to DIN rail so fault currents can safely flow to ground. These terminal blocks should only be used for grounding circuits.

A screw presses the clamp onto the wire for a secure hold.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks											Covers		End Stops
									Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size	Enclosure Rating		1-24	25-Up		Each		Each



	1	2	22 to 12	6	28	Green/Yellow	2	IP20	7641K63	00000	00000	7641K961	00000	7641K69	00000

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1	6	—	100	White	7641K812	00000	00000


		Numbered for Horizontal Rails



				1	6	1 to 100	100	White	7641K834	0000	0000


				1	6	101 to 200	100	White	7641K835	0000	0000


				Numbered for Vertical Rails



						1	6	1 to 100	100	White	7641K832	0000	0000


						1	6	101 to 200	100	White	7641K833	0000	0000

Fuse Terminal Blocks with Screw-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Space-Saving Modular DIN-Rail Mount Terminal Blocks, Fuse Terminal Blocks with Screw-Clamp Terminals.

Install a fuse in the built-in fuse holder so excess current doesn't damage your equipment. If the current exceeds the limit, the fuse will blow and cut power to connected components.

A screw presses the clamp onto the wire for a secure hold.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks														Covers		End Stops
					For Fuse							Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Overall Dia., mm	Overall Lg., mm	Type	Color	For DIN Rail Trade Size	Enclosure Rating		1-24	25-Up		Each		Each







			630V AC—6.3 amp per Circuit

			1	2	18 to 12	8	59.5	5	20	Ceramic, Glass	Gray	2	IP20	7641K58	00000	00000	7641K37	00000	7641K69	00000

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1, 2	8, 10, 12, 13, 16, 22	—	100	White	7641K981	00000	00000


		Numbered for Horizontal Rails



				1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	7641K991	0000	0000


				1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	7641K992	0000	0000


				Numbered for Vertical Rails



						1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	7641K993	0000	0000


						1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	7641K994	0000	0000

Enclosure-Mounted Terminal Blocks

These blocks come mounted in an enclosure that you can pop directly onto walls or equipment. They also reduce hassle because you can wire your circuits before installing the enclosure. Enclosures protect the terminal blocks from water, oil, and corrosion. Knockouts make it easy to run wire in and out of the enclosure. For enclosures without knockouts, you’ll need to drill your own holes for the wiring.

The screw-clamp terminals flatten your wire so it stays put when vibrated or pulled. For an even stronger and more conductive connection, crimp a terminal or wire ferrule onto the end of the wire. If you need to change wiring frequently without adjusting a screw, consider a terminal block with spring-clamp terminals.

ABS—Tough yet lightweight, these enclosures shield terminal blocks from incidental knocks on busy worksites. They also keep their strength and shape when exposed to water and mild detergents.

Powder-Coated Aluminum—Even more durable and impact resistant than ABS.

											Knockouts			Gray			White
	No. of Circuits	No. of Terminals per Circuit	Current per Circuit, amp	Voltage, V AC	For Wire Ga.	Wire Connection	Terminal Size	Ht.	Wd.	Dp.	No. of	Trade Size	Enclosure Rating	Terminal Ctr.-to-Ctr.		Each	Terminal Ctr.-to-Ctr.		Each
Center Terminal Block
Center Terminal Block






				ABS

				4	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	3 9/16"	2 1/16"	1 3/4"	2	1/2, PG-13.5	IP65, NEMA 6	11/32"	1041N7	000000	11/32"	1041N331	000000


				6	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	3 9/16"	2 9/16"	1 3/4"	2	1/2, PG-13.5	IP65, NEMA 6	11/32"	1041N12	00000	11/32"	1041N332	00000
				10	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	3 9/16"	3 15/16"	1 3/4"	4	1/2, PG-13.5	IP65, NEMA 6	11/32"	1041N16	00000	11/32"	1041N333	00000
				15	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	7 7/8"	3 15/16"	2 9/16"	—	—	IP65, NEMA 6	11/32"	1041N21	00000	11/32"	1041N335	00000
				20	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	6 5/16"	5 7/8"	2 9/16"	—	—	IP65, NEMA 6	11/32"	1041N25	00000	11/32"	1041N336	00000
				30	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	7 1/2"	4 15/16"	2 9/16"	—	—	IP65, NEMA 6	5/16"	1041N338	00000	5/16"	1041N339	00000
				40	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	10 3/8"	6 3/8"	3 9/16"	—	—	IP65, NEMA 6	5/16"	1041N342	00000	—	———	0




						Powder-Coated Aluminum

						12	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	4 5/16"	4 5/16"	2 1/16"	—	—	IP67, NEMA 12	5/16"	1041N334	00000	—	———	0


						20	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	5 11/16"	4 15/16"	2 7/16"	—	—	IP67, NEMA 12	5/16"	1041N337	00000	—	———	0
						30	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	7 1/2"	4 15/16"	3 1/8"	—	—	IP67, NEMA 12	5/16"	1041N341	000000	—	———	0
						40	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	10 1/4"	6 5/16"	3 9/16"	—	—	IP67, NEMA 12	5/16"	1041N343	000000	—	———	0


						Side Terminal Block
						Side Terminal Block






										ABS

										4	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	2 9/16"	2 9/16"	1 3/4"	3	1/2, PG-13.5	IP65, NEMA 6	5/16"	1041N9	00000	11/32"	1041N344	00000


										6	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	3 1/8"	2 9/16"	1 3/4"	3	1/2, PG-13.5	IP65, NEMA 6	5/16"	1041N14	00000	11/32"	1041N346	00000
										10	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	4 5/16"	2 9/16"	1 3/4"	4	1/2, PG-13.5	IP65, NEMA 6	5/16"	1041N18	00000	11/32"	1041N348	00000
										15	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	6 11/16"	2 15/16"	2 3/16"	5	1/2, PG-13.5	IP65, NEMA 6	5/16"	1041N23	00000	11/32"	1041N351	00000
										20	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	9 1/4"	3 1/8"	2 3/16"	—	—	IP65, NEMA 6	5/16"	1041N27	00000	11/32"	1041N353	00000




												Powder-Coated Aluminum

												4	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	2 3/4"	2 3/8"	1 7/8"	—	—	IP67, NEMA 12	5/16"	1041N345	00000	—	———	0


												6	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	3 11/16"	2 3/4"	2 1/16"	—	—	IP67, NEMA 12	5/16"	1041N347	00000	—	———	0
												10	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	5 1/16"	2 3/4"	2 1/16"	—	—	IP67, NEMA 12	5/16"	1041N349	00000	—	———	0
												15	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	6 3/4"	2 3/4"	2 3/16"	—	—	IP67, NEMA 12	5/16"	1041N352	00000	—	———	0
												20	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	9 1/4"	3 1/8"	3 1/8"	—	—	IP67, NEMA 12	5/16"	1041N354	000000	—	———	0

Space-Saving Terminal Blocks

These single-row terminal blocks connect the same number of circuits as double-row blocks, but in a narrower footprint. Also known as barrier terminal strips, they have dividers to separate live wires and keep your setup tidy. Mount them directly onto control panels, enclosures, and equipment.

You can screw down your stripped wire directly or attach a terminal to prevent damage from the screw. Ring, spade, and hook terminals fit around the screw and hang on tightly, even in high-vibration setups. Pin terminals, blade terminals, and wire ferrules are easier to slip under the screw head, but they don't stay put as well as other terminals when vibrated or pulled.

Note: Stick the included insulation strip to the bottom of the block before installing. The voltage listed applies only when the strip is attached.

										Mounting Holes
No. of Circuits	For Wire Ga.	Wire Connection	Terminal Size	Terminal Ctr.-to-Ctr.	Lg.	Wd.	Ht.	Max. Temp., ° F	Color	Dia.	No. of		Each







			150V AC/150V DC—15 amp per Circuit

			2	22 to 16	Screw Terminal	No. 5	3/8"	1 7/16"	9/16"	7/16"	302	Black	0.17"	2	8173T11	00000


			4	22 to 16	Screw Terminal	No. 5	3/8"	2 3/16"	9/16"	7/16"	302	Black	0.17"	2	8173T12	00000
			6	22 to 16	Screw Terminal	No. 5	3/8"	2 15/16"	9/16"	7/16"	302	Black	0.17"	2	8173T13	00000
			8	22 to 16	Screw Terminal	No. 5	3/8"	3 11/16"	9/16"	7/16"	302	Black	0.17"	2	8173T14	00000
			10	22 to 16	Screw Terminal	No. 5	3/8"	4 7/16"	9/16"	7/16"	302	Black	0.17"	2	8173T15	00000
			12	22 to 16	Screw Terminal	No. 5	3/8"	5 3/16"	9/16"	7/16"	302	Black	0.17"	2	8173T16	00000




					600V AC/600V DC—30 amp per Circuit

					2	14 to 12	Screw Terminal	No. 8	9/16"	2 1/16"	3/4"	3/4"	302	Black	0.21"	2	8173T51	00000


					4	14 to 12	Screw Terminal	No. 8	9/16"	3 1/4"	3/4"	3/4"	302	Black	0.21"	2	8173T52	00000
					6	14 to 12	Screw Terminal	No. 8	9/16"	4 5/16"	3/4"	3/4"	302	Black	0.21"	2	8173T53	00000
					8	14 to 12	Screw Terminal	No. 8	9/16"	5 1/2"	3/4"	3/4"	302	Black	0.21"	2	8173T54	00000
					10	14 to 12	Screw Terminal	No. 8	9/16"	6 5/8"	3/4"	3/4"	302	Black	0.21"	2	8173T55	00000
					12	14 to 12	Screw Terminal	No. 8	9/16"	7 3/4"	3/4"	3/4"	302	Black	0.21"	2	8173T56	00000

Terminal Blocks for Thermocouples

Unlike other terminal blocks, these blocks connect to thermocouple wire without distorting or destroying the signal. The metal in each terminal matches the metal of a specific thermocouple wire type. The ends of the blocks are labeled positive or negative so you know which end of the wire to attach.

Also known as a barrier strip, this type of terminal block has dividers to separate live wires and keep your setup tidy. Mount the blocks directly onto control panels, enclosures, and equipment. The screw-clamp terminals flatten your wire so it stays put when vibrated or pulled.

												Mounting Holes
	No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wire Connection	Terminal Size	Terminal Ctr.-to-Ctr.	Lg.	Wd.	Ht.	Max. Temp., ° F	Color	Dia.	No. of		Each
For J Thermocouple Wire Type







				250V AC—20 amp per Circuit

				2	4	16 to 14	Screw-Clamp Terminal	No. 6	7/16"	2 1/2"	1 1/8"	1/2"	300	Black	0.17"	4	7882N11	000000


				4	4	16 to 14	Screw-Clamp Terminal	No. 6	7/16"	4 1/4"	1 1/8"	1/2"	300	Black	0.17"	4	7882N14	00000
				6	4	16 to 14	Screw-Clamp Terminal	No. 6	7/16"	6"	1 1/8"	1/2"	300	Black	0.17"	4	7882N17	00000
				8	4	16 to 14	Screw-Clamp Terminal	No. 6	7/16"	7 3/4"	1 1/8"	1/2"	300	Black	0.17"	4	7882N21	00000
				10	4	16 to 14	Screw-Clamp Terminal	No. 6	7/16"	9 1/2"	1 1/8"	1/2"	300	Black	0.17"	4	7882N24	00000


				For K Thermocouple Wire Type







								250V AC—20 amp per Circuit

								2	4	16 to 14	Screw-Clamp Terminal	No. 6	7/16"	2 1/2"	1 1/8"	1/2"	300	Black	0.17"	4	7882N12	00000


								4	4	16 to 14	Screw-Clamp Terminal	No. 6	7/16"	4 1/4"	1 1/8"	1/2"	300	Black	0.17"	4	7882N15	00000
								6	4	16 to 14	Screw-Clamp Terminal	No. 6	7/16"	6"	1 1/8"	1/2"	300	Black	0.17"	4	7882N18	00000
								8	4	16 to 14	Screw-Clamp Terminal	No. 6	7/16"	7 3/4"	1 1/8"	1/2"	300	Black	0.17"	4	7882N22	00000
								10	4	16 to 14	Screw-Clamp Terminal	No. 6	7/16"	9 1/2"	1 1/8"	1/2"	300	Black	0.17"	4	7882N25	00000


								For T Thermocouple Wire Type







												250V AC—20 amp per Circuit

												2	4	16 to 14	Screw-Clamp Terminal	No. 6	7/16"	2 1/2"	1 1/8"	1/2"	300	Black	0.17"	4	7882N13	00000


												4	4	16 to 14	Screw-Clamp Terminal	No. 6	7/16"	4 1/4"	1 1/8"	1/2"	300	Black	0.17"	4	7882N16	00000
												6	4	16 to 14	Screw-Clamp Terminal	No. 6	7/16"	6"	1 1/8"	1/2"	300	Black	0.17"	4	7882N19	00000
												8	4	16 to 14	Screw-Clamp Terminal	No. 6	7/16"	7 3/4"	1 1/8"	1/2"	300	Black	0.17"	4	7882N23	00000
												10	4	16 to 14	Screw-Clamp Terminal	No. 6	7/16"	9 1/2"	1 1/8"	1/2"	300	Black	0.17"	4	7882N26	00000

Through-Panel Quick-Connect Terminal Blocks

Pop wire into these blocks by hand to connect components on opposite sides of a panel cutout. Lift the lever, insert your wire, then snap the lever down for a tight hold and reliable connection.

									For Panel Cutout
	No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wire Connection	Terminal Ctr.-to-Ctr.	Lg.	Wd.	Ht.	Lg.	Ht.	Max. Temp., ° F	Color		Each
600V AC/600V DC—40 amp per Circuit



		4	2	16 to 6	Lever-Clamp Terminal	7/16"	2 9/16"	2 13/16"	1 15/16"	2 1/16"	1 1/4"	221	Gray	8056T41	000000

Through-Panel Terminal Blocks

Mount these terminal blocks in a panel cutout to connect components on opposite sides. The screw-clamp terminals flatten your wire so it stays put when vibrated or pulled. For an even stronger and more conductive connection, crimp a terminal or wire ferrule onto the end of the wire.

									For Panel Cutout				Mounting Holes
	No. of Circuits	For Wire Ga.	Wire Connection	Terminal Size	Terminal Ctr.-to-Ctr.	Lg.	Wd.	Ht.	Lg.	Ht.	Max. Temp., ° F	Color	Dia.	No. of		Each
600V AC/600V DC—60 amp per Circuit



		1	10 to 3	Screw-Clamp Terminal	M5	5/8"	1 3/4"	1 13/16"	1 3/16"	3/4"	1"	194	Black	0.21"	2	8056T11	000000


		2	10 to 3	Screw-Clamp Terminal	M5	5/8"	2 3/8"	1 13/16"	1 3/16"	1 3/8"	1"	194	Black	0.21"	2	8056T12	00000
		3	10 to 3	Screw-Clamp Terminal	M5	5/8"	3"	1 13/16"	1 3/16"	2"	1"	194	Black	0.21"	2	8056T13	00000
		4	10 to 3	Screw-Clamp Terminal	M5	5/8"	3 11/16"	1 13/16"	1 3/16"	2 5/8"	1"	194	Black	0.21"	2	8056T14	00000
		5	10 to 3	Screw-Clamp Terminal	M5	5/8"	4 5/16"	1 13/16"	1 3/16"	3 1/4"	1"	194	Black	0.21"	2	8056T15	00000
		6	10 to 3	Screw-Clamp Terminal	M5	5/8"	4 15/16"	1 13/16"	1 3/16"	3 7/8"	1"	194	Black	0.21"	2	8056T16	00000

Terminal Blocks for Motors

Rotate the jumpers on these blocks to match wye (Y-shaped), delta, and other wiring layouts on three-phase motors. Each jumper connects two terminals positioned side by side, across the block, or on a diagonal.

For a reliable connection, attach a terminal to your wire before installing. Ring, spade, and hook terminals fit around the stud and hang on tightly, even in high-vibration setups. Pin terminals, blade terminals, and wire ferrules are easier to fit into the block, but they don't stay put as well as other terminals when vibrated or pulled.

											Mounting Holes
	No. of Circuits	For Wire Ga.	Wire Connection	Terminal Size	Terminal Ctr.-to-Ctr.	Lg.	Wd.	Ht.	Max. Temp., ° F	Color	Dia.	No. of		Each
1,000V AC/1,000V DC—35 amp per Circuit



		3	18 to 8	Stud Terminal	M4	1 1/16"	2 1/2"	1 7/16"	1 5/8"	266	Black	0.23"	2	3932N11	000000


		1,000V AC/1,000V DC—160 amp per Circuit



				3	12 to 2/0	Stud Terminal	M8	1 9/16"	4 7/16"	2 11/16"	3"	266	Black	0.35"	2	3932N12	00000


				1,000V AC/1,000V DC—315 amp per Circuit



						3	8	Stud Terminal	M12	2 3/4"	7 1/16"	6 1/2"	4 3/16"	266	Black	0.43"	4	3932N13	000000

Enclosure-Mounted Quick-Connect Terminal Blocks

Instead of fussing with screws, use a screwdriver to lift and release the clamp onto your wire. The spring clamps flatten your wire so it stays put when when vibrated or pulled.

These terminal blocks come mounted in an enclosure that you can pop directly onto walls or equipment. They also reduce hassle because you can wire your circuits before installing the enclosure. Enclosures protect the terminal blocks from water, oil, and corrosion. Knockouts make it easy to run wire in and out of the enclosure.

Polycarbonate—Tough yet lightweight, these enclosures shield terminal blocks from incidental knocks on busy worksites.

										Knockouts		Mounting Holes			White
	No. of Circuits	No. of Terminals per Circuit	Current per Circuit, amp	Voltage	For Wire Ga.	Wire Connection	Ht.	Wd.	Dp.	No. of	Dia.	Dia.	No. of	Enclosure Rating	Terminal Ctr.-to-Ctr.		Each
Center Terminal Block







				Polycarbonate

				5	2	35	600V AC/600V DC	22 to 8	Spring-Clamp Terminal	3 3/16"	3 1/4"	3 3/8"	2	0.7"	0.16"	4	IP65, NEMA 4X	5/16"	3691T11	000000


				10	2	35	600V AC/600V DC	22 to 8	Spring-Clamp Terminal	3 3/16"	4 3/4"	3 3/8"	2	0.7"	0.16"	4	IP65, NEMA 4X	5/16"	3691T12	00000
				15	2	41	600V AC/600V DC	24 to 8	Spring-Clamp Terminal	3 3/16"	6 5/16"	3 3/8"	2	0.7"	0.16"	4	IP65, NEMA 4X	5/16"	3691T333	00000
				20	2	26	600V AC/600V DC	22 to 10	Spring-Clamp Terminal	3 3/16"	6 5/16"	3 3/8"	2	0.7"	0.16"	4	IP65, NEMA 4X	3/16"	3691T14	000000

Space-Saving Circuit Board Terminal Blocks

Streamline wiring on small or crowded circuit boards. These terminal blocks connect the same number of circuits as larger blocks in about half the space. Pins on the bottom are spaced to match the layout of circuit boards. Solder them onto your board for a secure hold.

The screw-clamp terminals flatten your wire so it stays put when vibrated or pulled. For an even stronger and more conductive connection, crimp a terminal or wire ferrule onto the end of the wire.

								Pin
No. of Circuits	For Wire Ga.	Wire Connection	Terminal Size	Terminal Ctr.-to-Ctr.	Lg.	Wd.	Ht.	Lg.	Material	Max. Temp., ° F	Color	Pkg. Qty.		Pkg.







			300V AC—15 amp per Circuit

			2	22 to 12	Screw-Clamp Terminal	M3	3/16"	3/8"	3/8"	9/16"	0.12"	Tin-Plated Nickel	220	Black	10	5747N11	00000


			3	22 to 12	Screw-Clamp Terminal	M3	3/16"	5/8"	3/8"	9/16"	0.12"	Tin-Plated Nickel	220	Black	10	5747N12	00000
			4	22 to 12	Screw-Clamp Terminal	M3	3/16"	13/16"	3/8"	9/16"	0.12"	Tin-Plated Nickel	220	Black	10	5747N13	00000
			5	22 to 12	Screw-Clamp Terminal	M3	3/16"	1"	3/8"	9/16"	0.12"	Tin-Plated Nickel	220	Black	10	5747N14	00000
			6	22 to 12	Screw-Clamp Terminal	M3	3/16"	1 3/16"	3/8"	9/16"	0.12"	Tin-Plated Nickel	220	Black	5	5747N15	00000
			8	22 to 12	Screw-Clamp Terminal	M3	3/16"	1 5/8"	3/8"	9/16"	0.12"	Tin-Plated Nickel	220	Black	5	5747N16	00000

Plug-and-Socket Circuit Board Terminal Blocks


Plug	Socket

Cut power with the pull of a plug when you need to swap out equipment or adjust your circuit. You can wire the plug away from the terminal block, then pop it into the socket you've already installed. Pins on the bottom of these blocks are spaced to match the layout of circuit boards. Solder them onto your board for a secure hold. You'll need one plug and one socket for a complete terminal block.

The screw-clamp terminals flatten your wire so it stays put when vibrated or pulled. For an even stronger and more conductive connection, crimp a terminal or wire ferrule onto the end of the wire.

									Pin
	No. of Circuits	For Wire Ga.	Wire Connection	Terminal Size	Terminal Ctr.-to-Ctr.	Lg.	Wd.	Ht.	Lg.	Material	Max. Temp., ° F	Color	Pkg. Qty.		Pkg.
Plugs







				300V AC—18 amp per Circuit

				2	26 to 12	Screw-Clamp Terminal	M3	3/16"	3/8"	1/2"	11/16"	—	—	220	Black	10	5701N16	000000


				4	26 to 12	Screw-Clamp Terminal	M3	3/16"	13/16"	1/2"	11/16"	—	—	220	Black	10	5701N17	00000
				6	26 to 12	Screw-Clamp Terminal	M3	3/16"	1 3/16"	1/2"	11/16"	—	—	220	Black	10	5701N18	00000
				8	26 to 12	Screw-Clamp Terminal	M3	3/16"	1 5/8"	1/2"	11/16"	—	—	220	Black	5	5701N19	00000
				10	26 to 12	Screw-Clamp Terminal	M3	3/16"	2"	1/2"	11/16"	—	—	220	Black	5	5701N21	00000


				Sockets







								300V AC—18 amp per Circuit

								2	—	—	—	3/16"	1/2"	5/16"	1/2"	0.13"	Tin-Plated Nickel	220	Black	10	5701N11	0000


								4	—	—	—	3/16"	7/8"	5/16"	1/2"	0.13"	Tin-Plated Nickel	220	Black	10	5701N12	00000
								6	—	—	—	3/16"	1 1/4"	5/16"	1/2"	0.13"	Tin-Plated Nickel	220	Black	10	5701N13	00000
								8	—	—	—	3/16"	1 11/16"	5/16"	1/2"	0.13"	Tin-Plated Nickel	220	Black	5	5701N14	00000
								10	—	—	—	3/16"	2 1/16"	5/16"	1/2"	0.13"	Tin-Plated Nickel	220	Black	5	5701N15	00000

Touch-Safe Plug-and-Socket Terminal Blocks

These terminal blocks cut power when you pull the plug while protecting you from shocks. The terminals are recessed, so you can't accidentally touch them when installing or adjusting wire. You can wire the plug away from the block, then attach it to the socket you've already installed. Blocks can be cut into smaller sections. You'll need one plug and one socket for a complete terminal block.

You can screw down your stripped wire directly or attach a terminal to prevent damage from the screw. Ring, spade, and hook terminals fit around the screw and hang on tightly, even in high-vibration setups. Pin terminals, blade terminals, and wire ferrules are easier to fit into the block, but they don't stay put as well as other terminals when vibrated or pulled.

											Mounting Holes
	No. of Circuits	For Wire Ga.	Wire Connection	Terminal Size	Terminal Ctr.-to-Ctr.	Lg.	Wd.	Ht.	Max. Temp., ° F	Color	Dia.	No. of		Each
Plugs
Plug






				600V AC/600V DC—20 amp per Circuit

				2	24 to 10	Screw Terminal	M3	3/8"	5/8"	9/16"	3/4"	221	White	0.12"	1	81905K11	00000


				4	24 to 10	Screw Terminal	M3	3/8"	1 7/16"	9/16"	3/4"	221	White	0.12"	3	81905K12	0000
				6	24 to 10	Screw Terminal	M3	3/8"	2 1/4"	9/16"	3/4"	221	White	0.12"	5	81905K13	0000
				8	24 to 10	Screw Terminal	M3	3/8"	3"	9/16"	3/4"	221	White	0.12"	7	81905K14	0000
				10	24 to 10	Screw Terminal	M3	3/8"	3 13/16"	9/16"	3/4"	221	White	0.12"	9	81905K15	0000
				12	24 to 10	Screw Terminal	M3	3/8"	4 5/8"	9/16"	3/4"	221	White	0.12"	11	81905K16	00000


				Sockets
				Socket






								600V AC/600V DC—20 amp per Circuit

								2	24 to 10	Screw Terminal	M3	3/8"	5/8"	13/16"	3/4"	221	White	0.14"	1	81905K21	0000


								4	24 to 10	Screw Terminal	M3	3/8"	1 7/16"	13/16"	3/4"	221	White	0.14"	3	81905K22	0000
								6	24 to 10	Screw Terminal	M3	3/8"	2 1/4"	13/16"	3/4"	221	White	0.14"	5	81905K23	0000
								8	24 to 10	Screw Terminal	M3	3/8"	3"	13/16"	3/4"	221	White	0.14"	7	81905K24	0000
								10	24 to 10	Screw Terminal	M3	3/8"	3 13/16"	13/16"	3/4"	221	White	0.14"	9	81905K25	0000
								12	24 to 10	Screw Terminal	M3	3/8"	4 5/8"	13/16"	3/4"	221	White	0.14"	11	81905K26	0000

Clear-View Enclosure-Mounted Terminal Blocks


Center Terminal Block	Side Terminal Block

A clear plastic cover lets you inspect your terminal block while keeping out dirt and liquids. These blocks come mounted in an enclosure that you can pop directly onto walls or equipment. They also reduce hassle because you can wire your circuits before installing the enclosure. Enclosures protect the terminal blocks from water, oil, and corrosion. Knockouts make it easy to run wire in and out of the enclosure. For enclosures without knockouts, you’ll need to drill your own holes for the wiring.

ABS—Tough yet lightweight, these enclosures shield terminal blocks from incidental knocks on busy worksites. They also keep their strength and shape when exposed to water and mild detergents.

											Knockouts			Gray
	No. of Circuits	No. of Terminals per Circuit	Current per Circuit, amp	Voltage, V AC	For Wire Ga.	Wire Connection	Terminal Size	Ht.	Wd.	Dp.	No. of	Trade Size	Enclosure Rating	Terminal Ctr.-to-Ctr.		Each
Center Terminal Block







				ABS

				4	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	3 9/16"	2 1/16"	1 3/4"	2	1/2, PG-13.5	IP65, NEMA 6	11/32"	1041N8	000000


				6	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	3 9/16"	2 9/16"	1 3/4"	2	1/2, PG-13.5	IP65, NEMA 6	11/32"	1041N13	00000
				10	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	3 9/16"	3 15/16"	1 3/4"	4	1/2, PG-13.5	IP65, NEMA 6	11/32"	1041N17	00000
				15	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	7 13/16"	3 7/8"	2 1/2"	—	—	IP65, NEMA 6	11/32"	1041N22	00000
				20	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	6 5/16"	5 7/8"	2 9/16"	—	—	IP65, NEMA 6	11/32"	1041N26	00000
				30	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	7 1/2"	4 3/4"	2 1/2"	—	—	IP65, NEMA 6	5/16"	1041N35	00000


				Side Terminal Block







								ABS

								4	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	2 9/16"	2 9/16"	1 3/4"	3	1/2, PG-13.5	IP65, NEMA 6	11/32"	1041N11	00000


								6	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	3 1/8"	2 9/16"	1 3/4"	3	1/2, PG-13.5	IP65, NEMA 6	11/32"	1041N15	00000
								10	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	4 5/16"	2 9/16"	1 3/4"	4	1/2, PG-13.5	IP65, NEMA 6	11/32"	1041N19	00000
								15	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	6 11/16"	2 15/16"	2 3/16"	5	1/2, PG-13.5	IP65, NEMA 6	11/32"	1041N24	00000
								20	2	15	120	20 to 14	Screw-Clamp Terminal	No. 6	9 1/4"	3 1/8"	2 1/4"	—	—	IP65, NEMA 6	11/32"	1041N28	00000

Circuit Board Terminal Blocks

Pins on the bottom of these terminal blocks are spaced to match the layout of circuit boards. Solder them onto your board for a secure hold.

The screw-clamp terminals flatten your wire so it stays put when vibrated or pulled. For an even stronger and more conductive connection, crimp a terminal or wire ferrule onto the end of the wire.

Over-Barrier Jumpers—Fit these jumpers over terminal block dividers to leave free space on the side. They connect adjacent terminals so you can connect multiple components with a single wire.

Terminal Blocks														Over-Barrier Jumpers
								Pin
No. of Circuits	For Wire Ga.	Wire Connection	Terminal Size	Terminal Ctr.-to-Ctr.	Lg.	Wd.	Ht.	Lg.	Material	Max. Temp., ° F	Color		Each	Pkg. Qty.		Pkg.







			300V AC/300V DC—25 amp per Circuit

			2	22 to 12	Screw-Clamp Terminal	No. 6	3/8"	13/16"	5/8"	11/16"	0.19"	Tin-Plated Brass	230	Black	8076K12	00000	50	8076K29	000000


			4	22 to 12	Screw-Clamp Terminal	No. 6	3/8"	1 9/16"	5/8"	11/16"	0.19"	Tin-Plated Brass	230	Black	8076K14	0000	50	8076K29	00000
			6	22 to 12	Screw-Clamp Terminal	No. 6	3/8"	2 5/16"	5/8"	11/16"	0.19"	Tin-Plated Brass	230	Black	8076K16	0000	50	8076K29	00000
			8	22 to 12	Screw-Clamp Terminal	No. 6	3/8"	3 1/16"	5/8"	11/16"	0.19"	Tin-Plated Brass	230	Black	8076K18	0000	50	8076K29	00000
			12	22 to 12	Screw-Clamp Terminal	No. 6	3/8"	4 9/16"	5/8"	11/16"	0.19"	Tin-Plated Brass	230	Black	8076K23	0000	50	8076K29	00000

Quick-Disconnect Adapters


Straight	90° Angle

45° Angle

Convert screw terminal connections into quick-disconnect terminal connections.

Tab Wd.	Pkg. Qty.		Pkg.



Straight	0.187"	100	8076K31	000000


90° Angle	0.187"	50	8076K28	0000
45° Angle	0.187"	100	8076K27	00000

Terminal Blocks for RTD and Thermocouple Connection Heads


Oblong	Round

These terminal blocks fit inside connection heads for thermocouples and RTD. Make sure the block has enough circuits for your probe, and use a wire that matches your probe type. You can insert stripped wire directly or attach a terminal to prevent damage from the fastener.

												Mounting Slots
	No. of Circuits	For Max. Wire Ga.	Wire Connection	Dia.	Ht.	Wd.	Dp.	For Thermocouple Wire Type	For RTD Probe Resistance, ohm	Max. Temp., ° F	Material	Ht.	Wd.	No. of		Each
Oblong



		2	14	Screw Terminal	—	1 3/8"	2"	1"	J, JX, K, KK, KX, T, TX	100; 1,000	1,000	Ceramic	3/16"	9/16"	2	38705K82	000000


		3	14	Screw Terminal	—	1 3/8"	2"	1"	J, JX, K, KK, KX, T, TX	100; 1,000	1,000	Ceramic	3/16"	9/16"	2	38705K83	00000
		4	14	Screw Terminal	—	1 3/8"	2"	1"	J, JX, K, KK, KX, T, TX	100; 1,000	1,000	Ceramic	3/16"	9/16"	2	5927N11	00000
		6	14	Screw Terminal	—	1 3/8"	2"	1"	J, JX, K, KK, KX, T, TX	100; 1,000	1,000	Ceramic	3/16"	9/16"	2	5927N12	00000


		Round



				2	14	Screw Terminal	1 15/16"	—	—	3/4"	J, JX, K, KK, KX, T, TX	100; 1,000	1,000	Ceramic	3/16"	5/16"	2	5927N13	00000


				3	14	Screw Terminal	1 15/16"	—	—	3/4"	J, JX, K, KK, KX, T, TX	100; 1,000	1,000	Ceramic	3/16"	5/16"	2	5927N14	00000
				4	14	Screw Terminal	1 15/16"	—	—	3/4"	J, JX, K, KK, KX, T, TX	100; 1,000	1,000	Ceramic	3/16"	5/16"	2	5927N15	00000
				6	14	Screw Terminal	1 15/16"	—	—	3/4"	J, JX, K, KK, KX, T, TX	100; 1,000	1,000	Ceramic	3/16"	5/16"	2	5927N16	00000

Quick-Connect Plug-and-Socket Modular DIN-Rail Mount Terminal Blocks

Cut power with the pull of a plug when you need to swap out equipment or adjust your circuit. One of the openings on these blocks is a socket, so you can wire a plug outside the enclosure and then attach it to the socket that’s already in place.

The other connections are spring clamps, so you can pop wire in and out of these terminal blocks without adjusting a screw. Lift the clamp with a screwdriver, then release the clamp down onto the wire. Once clamped in place, the wire will stay put when vibrated, bent, or pulled.

Mix and match these terminal blocks to get the exact number of circuits you need in a single setup. Add blocks for grounding wire as needed. The blocks clip side by side onto DIN rail in control panels, creating tidy rows of circuits that you can identify and access on the spot.

Sockets with Spring-Clamp Terminals

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks									Covers		End Stops		Adjacent Jumpers
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size		Each		Each		Each	Insulation		Each







			300V AC/300V DC—10 amp per Circuit

			1	1	24 to 16	3.5	48.5	Blue	3	4053N12	00000	4053N401	00000	9473T144	00000	Insulated	4280N401	00000


			1	1	24 to 16	3.5	48.5	Gray	3	4053N11	0000	4053N401	0000	9473T144	0000	Insulated	4280N401	0000
			1	1	24 to 16	3.5	58.2	Blue	3	4053N15	0000	4053N402	0000	9473T144	0000	Insulated	4280N401	0000
			1	1	24 to 16	3.5	58.2	Gray	3	4053N14	0000	4053N402	0000	9473T144	0000	Insulated	4280N401	0000
			1	1	24 to 16	3.5	85.25	Blue	3	4053N18	0000	4053N403	0000	9473T144	0000	Insulated	4280N401	0000
			1	1	24 to 16	3.5	85.25	Gray	3	4053N17	0000	4053N403	0000	9473T144	0000	Insulated	4280N401	0000

Markers

Ground Sockets with Spring-Clamp Terminals

Connect grounding wire to DIN rail so fault currents can safely flow to ground. These terminal blocks should only be used for grounding circuits.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks									Covers		End Stops		Adjacent Jumpers
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size		Each		Each		Each	Insulation		Each



	1	1	24 to 16	3.5	50.8	Green/Yellow	3	4053N13	00000	4053N401	00000	9473T144	00000	Insulated	4280N401	00000


	1	1	24 to 16	3.5	61.8	Green/Yellow	3	4053N16	0000	4053N402	0000	9473T144	0000	Insulated	4280N401	0000
	1	1	24 to 16	3.5	85.25	Green/Yellow	3	4053N19	0000	4053N403	0000	9473T144	0000	Insulated	4280N401	0000

Markers

Plugs with Spring-Clamp Terminals

Wd., mm	Ht., mm	Color		Each







300V AC/300V DC—10 amp per Circuit

1	1	24 to 16	3.5	40.5	Gray	4053N303	00000


2	2	24 to 16	7.7	48.9	Gray	4053N302	00000