Abrasion-Resistant Bench-Top Roller Conveyors
 |  |
 |
Push glass, painted objects, and other delicate material from one workstation to the next. These conveyors rest on a flat surface instead of a stand, and they have PVC rollers that won’t mark or dent your material. They have two sets of axle holes for the rollers, so you can position the conveying surface 1/8" above the frame or 3/4" below. The frame serves as a guide rail when rollers are mounted below it.
Note: Capacities are based on an evenly distributed load. The length of the material you're conveying should be at least three times the roller spacing.
For technical drawings and 3-D models, click on a part number.
Wd. | Roller | 5 ft. Lg. | 10 ft. Lg. | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all | Between Frame | Spacing | Projection | Dp. Below Frame | Frame Ht. | Cap., lbs./ft. | Each | Cap., lbs./ft. | Each | ||
0.78" Dia. PVC Plastic Rollers—1/4" Round Axle | |||||||||||
| 5" | 4" | 1" | 1/8" | 3/4" | 2 1/2" | 120 | 0000000 | 0000000 | 35 | 0000000 | 0000000 |
| 9" | 8" | 1" | 1/8" | 3/4" | 2 1/2" | 120 | 0000000 | 000000 | 35 | 0000000 | 00000000 |
| 13" | 12" | 1" | 1/8" | 3/4" | 2 1/2" | 120 | 0000000 | 000000 | 35 | 0000000 | 00000000 |
Abrasion-Resistant Roller Conveyors
Move delicate items, such as glass and painted parts, through your facility without scratching or denting them. Made of PVC, the rollers on these conveyors are softer and quieter than those on metal conveyors. However, they’re not as strong, so you should avoid moving heavy or sharp objects that could damage them. They convey objects with either flat or uneven bottoms, such as boxes or shipping tubes.
These conveyors don’t run on electricity, so their rollers require momentum from gravity, a push, or a different power source to move. Since they’re not wired, they’re quick to set up and easy to maintain. This makes them handy if another conveyor unexpectedly shuts down or you need to extend an existing line in a pinch.
Stands adjust in height.
Note: Capacities are based on an evenly distributed load. The length of the material you’re conveying should be at least three times the roller spacing.
For technical drawings and 3-D models, click on a part number.
Wd. | 3" Roller Spacing | ||||||
|---|---|---|---|---|---|---|---|
| O'all | Between Frame | Lg., ft. | Frame Ht. | Cap. (No. of Stands Required) | No. of Stands Included | Each | |
1.9" Dia. Gray PVC Plastic Rollers—Hex Axle | |||||||
| 12" | 10" | 5 | 3 1/2" | 400 lbs./ft. (2) | None | 0000000 | 0000000 |
| 12" | 10" | 10 | 3 1/2" | 140 lbs./ft. (2), 300 lbs./ft. (3) | None | 0000000 | 00000000 |
| 18" | 16" | 5 | 3 1/2" | 400 lbs./ft. (2) | None | 0000000 | 000000 |
| 18" | 16" | 10 | 3 1/2" | 140 lbs./ft. (2), 300 lbs./ft. (3) | None | 0000000 | 00000000 |
| 24" | 22" | 5 | 3 1/2" | 400 lbs./ft. (2) | None | 0000000 | 000000 |
| 24" | 22" | 10 | 3 1/2" | 140 lbs./ft. (2), 300 lbs./ft. (3) | None | 0000000 | 00000000 |
| 30" | 28" | 5 | 3 1/2" | 400 lbs./ft. (2) | None | 0000000 | 000000 |
| 30" | 28" | 10 | 3 1/2" | 140 lbs./ft. (2), 300 lbs./ft. (3) | None | 0000000 | 00000000 |
Floor Mount. Slot | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Material | Color | Conveyor Mount. Fasteners Included | No. of Conveyor Mount. Holes | Conveyor Mount. Hole Dia. | Floor Mount. Fasteners Included | No. of Floor Mount. Holes | Lg. | Wd. | Each | |
For 12" Overall Wd. | |||||||||||
| 14" to 17" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 00000000 | 000000 |
| 17" to 23" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 00000000 | 00000 |
| 24" to 30" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 00000000 | 00000 |
| 31" to 37" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 00000000 | 00000 |
| 38" to 44" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 00000000 | 000000 |
For 18" Overall Wd. | |||||||||||
| 14" to 17" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 00000000 | 00000 |
| 17" to 23" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 00000000 | 00000 |
| 24" to 30" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 00000000 | 00000 |
| 31" to 37" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 00000000 | 000000 |
| 38" to 44" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 00000000 | 000000 |
For 24" Overall Wd. | |||||||||||
| 14" to 17" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 00000000 | 00000 |
| 17" to 23" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 00000000 | 00000 |
| 24" to 30" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 00000000 | 000000 |
| 31" to 37" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 00000000 | 000000 |
| 38" to 44" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 00000000 | 000000 |
For 30" Overall Wd. | |||||||||||
| 14" to 17" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 0000000 | 00000 |
| 17" to 23" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 00000000 | 00000 |
| 24" to 30" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 00000000 | 00000 |
| 31" to 37" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 00000000 | 00000 |
| 38" to 44" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 00000000 | 000000 |