We will reply to your message within an hour.
The abrasive grains in these bits are blended with rubber, which cushions during grinding to produce a smoother surface texture than other bits with similar grits.
The bits in these sets have rubber blended into the abrasive, which cushions during grinding to produce a smooth to extra-smooth surface texture.
Bits thread onto mounted shanks so you can quickly switch head shapes without removing the shank. The abrasive grains are blended with rubber, which cushions during grinding to produce a smoother surface texture than other bits with similar grits.
The abrasive grains in these discs are blended with rubber, which cushions during grinding to produce a smoother surface texture than other discs with similar grits. Discs attach to your grinder with a shank.
A diamond abrasive that's bonded to a rubber cushioning makes these bits last 10 to 20 times longer than rubber-cushioned bits without diamond. Because they’re cushioned during grinding, these bits produce a smoother surface texture than other bits with similar grits.
Produce a smooth surface on precise, intricate grinding jobs.
Made of aluminum oxide, these bits are well suited for use on most metals and materials that are not heat sensitive.
Similar to diamond, boron nitride is harder than aluminum oxide and lasts longer. Bits are also known as jig grinding pins and mandrels.
Made of cotton fiber layers embedded with aluminum-oxide grains, these bits grind and finish in one step.
Set contains a selection of our most popular hex-shank grinding bits. Use them in any drill chuck that accepts a 1/4" hex shank.
Use bits in any drill chuck that accepts a 1/4" hex shank.
Bits are specially formulated to stay cool during grinding, so they won’t mar or discolor stainless steel.
Each set contains a selection of our most popular grinding bits.
The small 3/32" diameter shank and small head makes these bits good for precise and intricate jobs.
Sets contain an assortment of tools for grinding, sanding, and cutting on small surface areas.
Made of ceramic alumina, these bits prevent material and heat buildup better than bits made of boron nitride and aluminum oxide when used on steel, stainless steel, iron, and titanium.
The diamond abrasive in these bits is extremely hard and lasts longer than tungsten carbide. For longer tool life and improved finish, use a water- or oil-soluble mist or coolant.
Almost as hard as diamond, these tungsten carbide bits cut through nonmetals without generating heat.
Best for grinding composites, fiberglass, plaster, plastic, rubber, and wood without generating heat, these sets include a selection of our most popular tungsten carbide bits.
Made with diamond abrasive, these bits are extremely hard and last longer than tungsten carbide. They have a small shank and head for precise and intricate jobs.
Grind a variety of materials, from metal to ceramic and plastic, in precise, detailed jobs.
Best for intricate, precise grinding jobs on metal, ceramic, and plastic, these sets include diamond abrasive bits with different head shapes.
The diamond abrasive in these bits is extremely hard and can grind metal, ceramic, and plastic.
Finish the edges of metal, polymer, and plastic 3D printed parts with the bits, burs, wheels, and brushes in these kits.
Buff, polish, and clean with in these kits.
Sharpen, deburr, and grind metal surfaces.
Shape and smooth wood, fiberglass, and rubber surfaces or remove rust from metal.
The silicon carbide abrasive cuts quickly with light pressure.
These bobs have a long-lasting diamond abrasive.
Remove scratches from your workpiece with these hard bobs.
Polish small areas and hard-to-reach spots. Use in a drill or grinder for bits and burs.
Remove minor scratches, scuffs, cloudy surfaces, and hard water etching from glass or plastic.
The abrasive-embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.
Slip a cap onto the head of a shank and sand small, recessed, and hard-to-reach areas.
Choose a bit with the same angle as your countersink to debur the inside of the hole.
The tungsten carbide abrasive is extremely durable.
A coating prevents dust and debris from building up on the abrasive surface. These sleeves shape, deburr, and sand edges and internal surfaces.
Shape, debur, and sand edges and internal surfaces.
The premium abrasive stays sharp longer.
Assortments include a selection of sanding sleeves to shape, debur, and sand edges and internal surfaces.
Assortments include a variety of sanding drums and sleeves to shape, deburr, and sand edges and internal surfaces.
Flexible flaps reduce gouging while producing a uniform finish on flat and curved surfaces. They provide more control than a standard sanding sleeve but are more aggressive than a traditional flap wheel. As the flaps wear, new abrasive is exposed.
Keep a convenient mix of spiral-wound sanding rolls on hand. As the outer layer wears away, new abrasive is exposed.
As the outer layer wears away, new abrasive is exposed.
Sand inside pipes and tubes as well as on an angle to reach into corners and slots.
Secure the shank into the collet or chuck of your tool.
Various sizes and grits of flap sanding wheels are included in these assortments. Secure the shank into the collet or chuck of your tool.
The flaps are slit into narrow strips to provide more flexibility than other flap wheels.
An additive in the abrasive resists heat.
The abrasive‐embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.
A coating prevents dust and debris from building up on the abrasive surface.
With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap sanding wheels.
These assortments include various sizes and grits of flap sanding wheels. The threaded stud allows faster wheel changes but requires the use of an adapter in your tool.
The threaded stud allows faster wheel changes but requires the use of an adapter in your tool.
Fit these wheels over your tool's arbor. The flexible flaps reduce gouging while producing a uniform finish on flat and curved surfaces.
Assortments include a selection of flap wheels to polish, clean, and deburr deep inside tubes and cylinders.
Polish, clean, and debur deep inside tubes and cylinders.
With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap wheels.
These hones have a long-lasting diamond abrasive.
The aluminum oxide abrasive, which has blunt edges, won't clog the hone, especially when used with honing oil.
Embedded with silicone carbide for use on steel.
The flexible shank on these hones gives you access to hard-to-reach spots. A knurled adjustment knob lets you adjust the pressure applied to the side of the cylinder to achieve your desired finish.
Precisely size the hone to your cylinder in micrometer increments.
A titanium aluminum nitride (TiAlN) coating provides heat and wear resistance for longer life.
Reach around barriers to cut, grind, shape, and remove sharp edges in hard-to-access spots.
Extend your reach with these 3" to 7¼" long burs.
Specially spaced flutes quickly remove materials such as aluminum, brass, bronze, and plastics without clogging.
Diamond-cut teeth effectively cut hard materials.
Pointed teeth cut wood and rubber quickly without clogging.
Extend your reach with these 6 1/4" to 7" long burs.
Quickly attach and remove these bits from interchangeable-bit tools.
Power troublesome burrs off of thin-wall (EMT) conduit and attach fittings in less time than traditional hand tools. These bits have a 1/4" hex shank that fits quick-change drill chucks and power screwdrivers to quickly deburr the inside and outside edges of conduit in a single step.
The extra-coarse threads on these arbors provide a stronger hold on the sanding roll.
The arbor’s shank attaches to hand-held drills and die grinders. Threads on the body hold the sanding roll in place.
Also known as cross- and square-sanding pad shank adapters, these arbors are required to attach sanding pads for internal and irregular surfaces to hand-held drills and die grinders.
This drum is required to use a sanding sleeve with a Dremel grinder.
Install a sanding sleeve on the threaded shaft of a bench or pedestal grinder using one of these drums.
No tools required—twist the drum head by hand to tighten the sanding sleeve to the drum.
Mount a sanding sleeve to the straight shaft of a bench or pedestal grinder using one of these drums.
Slide a flap sanding sleeve on the drum and twist the drum by hand to secure the sleeve.
Slide a sanding sleeve on the drum and tighten the nut or screw to securely hold the sleeve.