The mesh in these sanding pads flexes to compensate for uneven pressure as you sand, producing a consistent finish.

When you need to achieve a more consistent finish, choose nylon mesh sanding rolls over paper- or cloth-backed rolls.

The long sides of these sponges are angled to get into corners and edges that a flat sponge might miss.

These sponges prevent debris from accumulating on the abrasive surface and keep operating temperatures low.

Evenly sand two surfaces at once.

A cushioned layer lets you apply more even sanding pressure on your workpiece, creating finer and more consistent finishes.

Keep sanding sheets of various grits on hand.

The grit particles are block shaped and cut slowly to produce a polished surface on metals.

Create smooth finishes on wood with these garnet sheets.

These assortments include three cut-to-length sanding rolls of various grits in a convenient dispenser.

The soft abrasive is good for fine hand-polishing of metal surfaces that require the smoothest finish possible after an abrasive sequence. Also known as crocus cloth.

Sanding rolls with precision-shaped ceramic alumina abrade hard metals like stainless steel faster than standard ceramic alumina rolls because of their sharp, outwardly pointed grit.

The soft abrasive is good for fine hand-polishing of soft nonferrous metals. Also known as crocus cloth.

A coating prevents dust and debris from building up on the abrasive surface.

Assortments include three cut-to-length sanding rolls of various grits that resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents.

Keep a variety of grits on hand, so you always have the right one for the job. These sheets won’t deteriorate when used wet or with grease, chemicals, cutting fluids, and other solvents.

The mesh in these sanding pads flexes to compensate for uneven pressure as you sand, producing a consistent finish.

When you need to achieve a more consistent finish, choose nylon mesh rolls over paper- or cloth-backed rolls.

Providing the control of a sanding block while remaining flexible, these sponges sand around curves and in corners.

These cut-to-length rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding. A layer of mesh lets sanding dust and debris escape during use, preventing material buildup on the abrasive surface.

A layer of mesh lets sanding dust and debris escape during use, preventing material buildup on the abrasive surface. These sheets resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

Flexible enough to sand around curves and in corners, these sponges provide the comfort and control of a sanding block. They have a long-lasting diamond abrasive on one side.

Peel and stick to your sanding tool. When it’s time to change the sheet, peel it off.

Use these rolls to create consistent finishes on hard metals such as stainless steel, iron, and nickel.

Quickly attach, remove, and reuse.

Dozens of vacuum holes throughout these rolls let a sander suck up dust and debris to prevent buildup on your sandpaper. They’re coated with the most common abrasive, aluminum oxide, which is hard enough to sand steel and wood.

Holes allow dust removal when used with a vacuum sander to prevent buildup of debris on the abrasive surface.

A coating prevents dust and debris from building up on the abrasive surface.

Peel and stick these sheets to your detail sander whenever it’s time for fresh grit.

Stick these sheets to your dust-collecting detail sander to smooth edges, corners, and other tight spaces.

These sheets have a long-lasting diamond abrasive.

Built for wet sanding joint compound on drywall and plaster, these sanding sheets won’t fall apart when used with water. They also withstand grease, chemicals, cutting fluids, and other solvents that may be on your work surface.

Use these sheets with pole sanders.

A coating prevents dust and debris from building up on the abrasive surface.

Stick these sheets to a hand sanding block for a more secure grip than hook and loop sanding sheets.

The abrasive-embedded nylon mesh construction gives you more control over sanding pressure.

Thicker, more flexible, and less aggressive than standard nylon mesh discs, use these for sanding on curved or delicate surfaces.

A special fastener on the back of these discs allows you to easily swap one disc for another.

From rough sanding to smooth finishing, these disc assortments include a variety of grits to meet your needs. All include discs with aluminum oxide abrasive, which is the most common for general sanding.

The heavy duty construction provides more support than standard discs for heavy material removal.

The outer 3/8" of these discs is extremely flexible to prevent marring or gouging your work when sanding a radius or contour.

When you need to achieve a more consistent finish, choose nylon mesh sanding discs over paper- or cloth-backed discs.

Used for heavy cleaning and stripping, these discs have an abrasive-embedded nylon mesh construction that gives you more control over sanding pressure.

A special fastener on the back of these discs allows you to easily swap one disc for another.

When you need to achieve a more consistent finish, choose nylon mesh sanding discs over paper- or cloth-backed discs.

Remove paint, primer, and other contaminants from electrical grounding contact points to ensure clean connections.

The nylon mesh on these discs is embedded with precision-shaped ceramic alumina, which cuts through hard metals like stainless steel faster than other forms of ceramic alumina because of its sharp, outwardly pointed grit.

Thicker, more flexible, and less aggressive than standard nylon mesh discs, use these for sanding on curved or delicate surfaces.

These discs are abrasive-embedded cloth with a cushioned layer.

Quickly attach, remove, and reuse these discs with a compatible sanding tool or backup pad.

Precision-shaped ceramic alumina discs abrade hard metals like stainless steel faster than standard ceramic alumina discs because of their sharp, outwardly pointed grit.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

Precision-shaped ceramic alumina discs abrade hard metals like stainless steel faster than standard ceramic alumina discs because of their sharp, outwardly pointed grit.

The mesh backing lets sanding dust and debris escape during use, preventing material build up on the abrasive surface.

For use with vacuum sanders, these discs have holes that allow dust to get sucked up before it can build up and dull the abrasive surface.

When you need to achieve a more consistent finish, choose nylon mesh sanding discs over paper- or cloth-backed discs.

Holes allow dust removal when used with a vacuum sander.

A coating prevents dust and debris from building up on the abrasive surface.

Precision-shaped ceramic alumina discs abrade hard metals like stainless steel faster than standard ceramic alumina discs because of their sharp, outwardly pointed grit.

Holes allow dust removal when used with a vacuum sander.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

For use with vacuum sanders, these discs have holes that allow dust to get sucked up before it can build up and dull the abrasive surface.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

Holes allow dust removal when used with a vacuum sander.

Prepare material surfaces for finishing processes such as coating, painting, and soldering—these discs contain an extra coarse ceramic alumina abrasive for heavy cleaning and stripping of stainless steel, nickel, and other hard metals.

Get twice the life over standard nylon mesh cushioned discs—the flexible mesh in these discs is embedded with a premium form of aluminum oxide that aggressively removes material from steel and wood.

Nylon mesh is embedded with precision-shaped ceramic alumina, which cuts through hard metals like stainless steel faster than other forms of ceramic alumina because of its sharp, outwardly pointed grit.

A coating prevents dust and debris from building up on the abrasive surface.

Fit these discs over your tool's arbor.

The ceramic alumina abrasive on these discs is sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly.

The premium abrasive stays sharp longer.

A coating prevents dust and debris from building up on the abrasive surface.