These assortments include three cut-to-length sanding rolls of various grits in a convenient dispenser.

Sanding rolls with precision-shaped ceramic alumina abrade hard metals like stainless steel faster than standard ceramic alumina rolls because of their sharp, outwardly pointed grit.

The grit particles are block shaped and cut slowly.

The soft abrasive is good for fine hand-polishing of soft nonferrous metals. Also known as crocus cloth.

Assortments include three cut-to-length sanding rolls of various grits that resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents.

When you need to achieve a more consistent finish, choose nylon mesh sanding rolls over paper- or cloth-backed rolls.

When you need to achieve a more consistent finish, choose nylon mesh sanding rolls over paper- or cloth-backed rolls.

The dental floss of abrasives, these cords slip into areas that other forms cannot. They're good for deburring and polishing small holes, narrow slots, keyways, and grooves.

When you need to achieve a more consistent finish, choose nylon mesh rolls over paper- or cloth-backed rolls.

The sharp abrasive on these rolls sands hard metals like stainless steel, nickel, and iron.

Cut the length you need, then stick to your sanding tool. When it's time to change the sheet, peel it off.

One of the sharpest abrasives, the silicon carbide on these rolls sands aluminum, copper, plastic, and rubber with ease, generating minimal heat to prevent material buildup.

Dozens of vacuum holes throughout these rolls let a sander suck up dust and debris to prevent buildup on your sandpaper. They’re coated with the most common abrasive, aluminum oxide, which is hard enough to sand steel and wood.

Holes allow dust removal when used with a vacuum sander to prevent buildup of debris on the abrasive surface.

The premium abrasive stays sharp longer.

Change your sanding rolls less often and produce a more consistent finish compared to standard sanding rolls.

Coated with ceramic alumina abrasive, these rolls are sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly.