These sheets resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

Coated with aluminum oxide—the most common abrasive material, hard enough to sand steel and wood.

A selection of 40 emery and crocus sanding sheets are included in these assortments.

The soft abrasive is good for fine hand-polishing of metal surfaces that require the smoothest finish possible after an abrasive sequence. Also known as crocus cloth.

Keep an assortment of sheets that prevent dust and debris from building up on the abrasive surface close at hand.

The mesh in these sanding pads flexes to compensate for uneven pressure as you sand, producing a consistent finish.

The thick, abrasive-embedded nylon mesh construction flexes to compensate for uneven pressure as you sand, producing a consistent finish.

Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes.

A layer of mesh lets sanding dust and debris escape during use, preventing material buildup on the abrasive surface. These sheets resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

The mesh in these sanding pads flexes to compensate for uneven pressure as you sand, producing a consistent finish.

These sheets have a long lasting diamond abrasive.

Peel and stick to your sanding tool. When it’s time to change the sheet, peel it off.

These sheets have a long-lasting diamond abrasive.

Cut to convenient sizes and shapes, these fit most sheet sanders.

A coating prevents dust and debris from building up on the abrasive surface.

Easy to attach and remove, these sheets grip the surface of your vacuum detail sander. Vacuum holes allow dust to get sucked up before it can build up and dull the abrasive surface.

A coating prevents dust and debris from building up on the abrasive surface.

Attach these sheets to pole sanders to smooth ceilings and walls. They’re covered in aluminum oxide, which is the most common abrasive for general use.

Dust and debris won’t build up on these sheets as you finish ceilings and walls. Pair them with pole sanders.

With rapid back and forth movements in a straight line, these sanders remove more material than random orbital sheet sanders.

Leave your material with a more uniform finish than if you used a standard sheet sander. Also known as random orbital sanders, these sanders move in small irregular circles.

Attach a nylon mesh sanding pad to these blocks for improved comfort and control.

Squeeze these blocks into corners or hug curved edges—they’re made from flexible foam.