These assortments include three cut-to-length sanding rolls of various grits in a convenient dispenser.

A thicker, heavier construction than standard rolls withstands tough sanding.

The soft abrasive is good for fine hand-polishing of metal surfaces that require the smoothest finish possible after an abrasive sequence. Also known as crocus cloth.

The dental floss of abrasives, these cords slip into areas that other forms cannot. They're good for deburring and polishing small holes, narrow slots, keyways, and grooves.

Assortments include three cut-to-length sanding rolls of various grits that resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents.

When you need to achieve a more consistent finish, choose nylon mesh sanding rolls over paper- or cloth-backed rolls.

When you need to achieve a more consistent finish, choose nylon mesh sanding rolls over paper- or cloth-backed rolls.

The dental floss of abrasives, these cords slip into areas that other forms cannot. They're good for deburring and polishing small holes, narrow slots, keyways, and grooves.

When you need to achieve a more consistent finish, choose nylon mesh rolls over paper- or cloth-backed rolls.

Holes allow dust removal when used with a vacuum sander to prevent buildup of debris on the abrasive surface.

Dozens of vacuum holes throughout these rolls let a sander suck up dust and debris to prevent buildup on your sandpaper. They’re coated with the most common abrasive, aluminum oxide, which is hard enough to sand steel and wood.

One of the sharpest abrasives, the silicon carbide on these rolls sands aluminum, copper, plastic, and rubber with ease, generating minimal heat to prevent material buildup.

Sanding rolls with precision-shaped ceramic alumina abrade hard metals like stainless steel faster than standard ceramic alumina rolls because of their sharp, outwardly pointed grit.

Coated with ceramic alumina abrasive, these rolls are sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly.

Change your sanding rolls less often and produce a more consistent finish compared to standard sanding rolls.

Keep a convenient mix of spiral-wound sanding rolls on hand. As the outer layer wears away, new abrasive is exposed.