ABS Film | McMaster-Carr

Filter by

Thickness

Shape

Color

Material

Length

Width

Diameter

Performance

Highly Electrically Insulating

Low Friction

Moisture Resistant

Thermally Stable

Ultra Impact Resistant

Clarity

Comparable To

For Use With

Methanol (Methyl Alcohol)

Mineral Oil

Phosphoric Acid

Sodium Hydroxide (Caustic Soda)

Sodium Hypochlorite (Bleach)

Synthetic Oil

Vegetable Oil

Tensile Strength

4,200 psi to 5,100 psi

7,690 psi to 8,100 psi

10,000 psi to 11,000 psi

RoHS

REACH

Tolerance Rating

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Water Absorption

Flexural Modulus

270,000 psi to 380,000 psi

400,000 psi to 420,000 psi

400,000 psi to 450,000 psi

Minimum Temperature

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Density

Impact Strength

0.7 ft·lbf/in to 1 ft·lbf/in

1 ft·lbf/in to 1.5 ft·lbf/in

6.3 ft·lbf/in to 7.7 ft·lbf/in

Hardness

Rockwell R101 to Rockwell R109

Rockwell R115 to Rockwell R118

Rockwell R120 to Rockwell R122

Dielectric Strength

400 V/mil to 500 V/mil

450 V/mil

450 V/mil to 500 V/mil

Maximum Temperature

71 Products

About Plastic

Compare over 25 types of plastic to find the right material for you.

Performance

High Strength

Our strongest plastic, with a tensile strength of 5,000 psi or higher

49 products

Impact Resistant

Absorb sudden blows and strikes instead of cracking

22 products

Performance

Machinable

Cut the smoothest finishes in the fastest time

49 products

Easy Thermoform

Soften over a broad temperature range to shape into precise parts

22 products

Ultra-Impact-Resistant ABS Film

Use this semi-rigid film to protect surfaces from damage caused by impact. It is thin and flexible enough to conform to large-radius bends. This film can be thermoformed.

	Thk. Tolerance	Wd.	Lg., ft.	Fabrication	Min. Temp., ° F	Max. Temp., ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in	Color	Food Industry Std.		Each
Plain Backing



	0.003"	-0.0003" to 0.0003"	12"	1	Extruded	40	140	4,200 to 5,100	6.3 to 7.7	Semi-Clear Beige	FDA Standard	5751T11	00000


	0.005"	-0.0005" to 0.0005"	12"	1	Extruded	40	140	4,200 to 5,100	6.3 to 7.7	Semi-Clear Beige	FDA Standard	5751T31	00000
	0.01"	-0.001" to 0.001"	12"	1	Extruded	40	140	4,200 to 5,100	6.3 to 7.7	Semi-Clear Beige	FDA Standard	5751T51	00000
	0.02"	-0.002" to 0.002"	12"	1	Extruded	40	140	4,200 to 5,100	6.3 to 7.7	Semi-Clear Beige	FDA Standard	5751T71	00000

Ultra-Impact-Resistant ABS Strips

ABS maintains its toughness even after thermoforming. More impact resistant than polycarbonate, it’s often made into storage cases, tote trays, equipment housings, and protective gear.

	Fabrication	Min. Temp.	Max. Temp., ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in	Flammability Rating	Choose a Length, ft.			Per Ft.
0.01" Thick (0" to 0.003" Tolerance)



	1/2"	Extruded	Not Rated	140	4,200 to 5,100	6.3 to 7.7	UL 94 HB	5, 10, 20	Black, White	8586K11	00000


	1"	Extruded	Not Rated	140	4,200 to 5,100	6.3 to 7.7	UL 94 HB	5, 10, 20	Black, White	8586K68	0000
	2"	Extruded	Not Rated	140	4,200 to 5,100	6.3 to 7.7	UL 94 HB	5, 10, 20	Black, White	8586K74	0000
	4"	Extruded	Not Rated	140	4,200 to 5,100	6.3 to 7.7	UL 94 HB	5, 10, 20	Black, White	8586K548	0000
	6"	Extruded	Not Rated	140	4,200 to 5,100	6.3 to 7.7	UL 94 HB	5, 10, 20	Black, White	8586K97	0000
	11"	Extruded	Not Rated	140	4,200 to 5,100	6.3 to 7.7	UL 94 HB	5, 10, 20	Black, White	8586K958	0000


	0.02" Thick (-0.002" to 0.002" Tolerance)



			1/2"	Extruded	Not Rated	140	4,200 to 5,100	6.3 to 7.7	UL 94 HB	5, 10, 20	Black, White	8586K33	0000


			1"	Extruded	Not Rated	140	4,200 to 5,100	6.3 to 7.7	UL 94 HB	5, 10, 20	Black, White	8586K69	0000
			2"	Extruded	Not Rated	140	4,200 to 5,100	6.3 to 7.7	UL 94 HB	5, 10, 20	Black, White	8586K75	0000
			4"	Extruded	Not Rated	140	4,200 to 5,100	6.3 to 7.7	UL 94 HB	5, 10, 20	Black, White	8586K869	0000
			6"	Extruded	Not Rated	140	4,200 to 5,100	6.3 to 7.7	UL 94 HB	5, 10, 20	Black, White	8586K98	0000
			12"	Extruded	Not Rated	140	4,200 to 5,100	6.3 to 7.7	UL 94 HB	5, 10, 20	Black, White	8586K688	0000


			1/32" Thick (-0.003" to 0.003" Tolerance)



					1/2"	Extruded	Not Rated	140	4,200 to 5,100	6.3 to 7.7	UL 94 HB	5, 10, 20	Black, White	8586K531	0000


					1"	Extruded	Not Rated	140	4,200 to 5,100	6.3 to 7.7	UL 94 HB	5, 10, 20	Black, White	8586K71	0000
					2"	Extruded	Not Rated	140	4,200 to 5,100	6.3 to 7.7	UL 94 HB	5, 10, 20	Black, White	8586K77	0000
					4"	Extruded	Not Rated	140	4,200 to 5,100	6.3 to 7.7	UL 94 HB	5, 10, 20	Black, White	8586K873	0000
					6"	Extruded	Not Rated	140	4,200 to 5,100	6.3 to 7.7	UL 94 HB	5, 10, 20	Black, White	8586K99	0000
					12"	Extruded	Not Rated	140	4,200 to 5,100	6.3 to 7.7	UL 94 HB	5, 10, 20	Black, White	8586K738	0000

Ultra-Machinable Delrin® Acetal Rods

Because these naturally slippery, wear-resistant rods and discs resist expanding when exposed to heat and moisture, they can be easily machined to close tolerances. They are a good choice for parts that require precision, such as gears, bushings, and bearings. Delrin® acetal resin is also known as acetal homopolymer; it is stronger and stiffer than acetal copolymer.

Long Rods

Image of Product. Front orientation. Plastic. Ultra-Machinable Delrin® Acetal Rods.

	Dia. Tolerance	Fabrication	Min. Temp., ° F	Max. Temp., ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in	Lg., ft.		Per Ft.
Black



	5 1/2"	0.000" to 0.250"	Extruded	-20	180	10,000 to 11,000	1 to 1.5	1	8576K861	0000000


	6 1/2"	0.000" to 0.250"	Extruded	-20	180	10,000 to 11,000	1 to 1.5	1	8576K871	000000
	7"	0.000" to 0.250"	Extruded	-20	180	10,000 to 11,000	1 to 1.5	1	8576K881	000000
	7 1/2"	0.000" to 0.250"	Extruded	-20	180	10,000 to 11,000	1 to 1.5	1	8576K841	000000
	8"	0.000" to 0.250"	Extruded	-20	180	10,000 to 11,000	1 to 1.5	1	8576K851	000000

Short Rods and Discs

							1/2" Long		1" Long		2" Long		3" Long		4" Long		6" Long
	Dia.	Dia. Tolerance	Fabrication	Temp., ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in		Each		Each		Each		Each		Each		Each
Black



		3"	0.000" to 0.250"	Extruded	-20 to 180	10,000 to 11,000	1 to 1.5	9986K11	00000	9986K12	000000	9986K13	000000	9986K14	000000	9986K15	000000	9986K16	000000


		4"	0.000" to 0.250"	Extruded	-20 to 180	10,000 to 11,000	1 to 1.5	9986K21	00000	9986K22	00000	9986K23	00000	9986K24	00000	9986K25	00000	9986K26	00000
		5"	0.000" to 0.250"	Extruded	-20 to 180	10,000 to 11,000	1 to 1.5	9986K51	00000	9986K52	00000	9986K53	00000	9986K54	00000	9986K56	000000	9986K55	000000
		6"	0.000" to 0.250"	Extruded	-20 to 180	10,000 to 11,000	1 to 1.5	9986K31	00000	9986K32	00000	9986K33	000000	9986K34	000000	9986K35	000000	9986K36	000000
		7"	0.000" to 0.250"	Extruded	-20 to 180	10,000 to 11,000	1 to 1.5	9986K71	00000	9986K72	00000	9986K74	000000	9986K76	000000	9986K77	000000	9986K79	000000
		8"	0.000" to 0.250"	Extruded	-20 to 180	10,000 to 11,000	1 to 1.5	9986K41	00000	9986K42	00000	9986K43	000000	9986K44	000000	9986K45	000000	9986K46	000000
		10"	0.000" to 0.250"	Extruded	-20 to 180	10,000 to 11,000	1 to 1.5	9986K81	000000	9986K82	000000	9986K84	000000	———	0	———	0	———	0

Ultra-Low-Friction Delrin® Acetal Rods

While just as dimensionally stable and machinable as standard Delrin® acetal resin rods and discs, these have a PTFE filler to make them more slippery and wear resistant. Fabricate them into pump components, gears, and bearings. Delrin® acetal resin is also known as acetal homopolymer.

Short Rods and Discs

Image of Product. Front orientation. Plastic. Ultra-Low-Friction Delrin® Acetal Rods.

								1" Long		3" Long		6" Long
	Dia.	Dia. Tolerance	Fabrication	Temp., ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in	Flammability Rating		Each		Each		Each
Brown



		4"	0.000" to 0.250"	Extruded	-40 to 185	7,690 to 8,100	0.7 to 1	UL 94 HB	9969K22	000000	9969K24	0000000	9969K26	0000000


		6"	0.000" to 0.250"	Extruded	-40 to 185	7,690 to 8,100	0.7 to 1	UL 94 HB	———	0	9969K34	000000	9969K36	000000